diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/eeprom.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/eeprom.c | 1796 |
1 files changed, 1796 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c new file mode 100644 index 0000000..94d34ee --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -0,0 +1,1796 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* EEPROM access functions and helpers * +\*************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/slab.h> + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" + + +/******************\ +* Helper functions * +\******************/ + +/* + * Translate binary channel representation in EEPROM to frequency + */ +static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin, + unsigned int mode) +{ + u16 val; + + if (bin == AR5K_EEPROM_CHANNEL_DIS) + return bin; + + if (mode == AR5K_EEPROM_MODE_11A) { + if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) + val = (5 * bin) + 4800; + else + val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : + (bin * 10) + 5100; + } else { + if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) + val = bin + 2300; + else + val = bin + 2400; + } + + return val; +} + + +/*********\ +* Parsers * +\*********/ + +/* + * Initialize eeprom & capabilities structs + */ +static int +ath5k_eeprom_init_header(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u16 val; + u32 cksum, offset, eep_max = AR5K_EEPROM_INFO_MAX; + + /* + * Read values from EEPROM and store them in the capability structure + */ + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); + + /* Return if we have an old EEPROM */ + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) + return 0; + + /* + * Validate the checksum of the EEPROM date. There are some + * devices with invalid EEPROMs. + */ + AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_UPPER, val); + if (val) { + eep_max = (val & AR5K_EEPROM_SIZE_UPPER_MASK) << + AR5K_EEPROM_SIZE_ENDLOC_SHIFT; + AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_LOWER, val); + eep_max = (eep_max | val) - AR5K_EEPROM_INFO_BASE; + + /* + * Fail safe check to prevent stupid loops due + * to busted EEPROMs. XXX: This value is likely too + * big still, waiting on a better value. + */ + if (eep_max > (3 * AR5K_EEPROM_INFO_MAX)) { + ATH5K_ERR(ah, "Invalid max custom EEPROM size: " + "%d (0x%04x) max expected: %d (0x%04x)\n", + eep_max, eep_max, + 3 * AR5K_EEPROM_INFO_MAX, + 3 * AR5K_EEPROM_INFO_MAX); + return -EIO; + } + } + + for (cksum = 0, offset = 0; offset < eep_max; offset++) { + AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); + cksum ^= val; + } + if (cksum != AR5K_EEPROM_INFO_CKSUM) { + ATH5K_ERR(ah, "Invalid EEPROM " + "checksum: 0x%04x eep_max: 0x%04x (%s)\n", + cksum, eep_max, + eep_max == AR5K_EEPROM_INFO_MAX ? + "default size" : "custom size"); + return -EIO; + } + + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), + ee_ant_gain); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); + + /* XXX: Don't know which versions include these two */ + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC2, ee_misc2); + + if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC3, ee_misc3); + + if (ee->ee_version >= AR5K_EEPROM_VERSION_5_0) { + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC4, ee_misc4); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC5, ee_misc5); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC6, ee_misc6); + } + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; + + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; + } + + AR5K_EEPROM_READ(AR5K_EEPROM_IS_HB63, val); + + if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && val) + ee->ee_is_hb63 = true; + else + ee->ee_is_hb63 = false; + + AR5K_EEPROM_READ(AR5K_EEPROM_RFKILL, val); + ee->ee_rfkill_pin = (u8) AR5K_REG_MS(val, AR5K_EEPROM_RFKILL_GPIO_SEL); + ee->ee_rfkill_pol = val & AR5K_EEPROM_RFKILL_POLARITY ? true : false; + + /* Check if PCIE_OFFSET points to PCIE_SERDES_SECTION + * and enable serdes programming if needed. + * + * XXX: Serdes values seem to be fixed so + * no need to read them here, we write them + * during ath5k_hw_init */ + AR5K_EEPROM_READ(AR5K_EEPROM_PCIE_OFFSET, val); + ee->ee_serdes = (val == AR5K_EEPROM_PCIE_SERDES_SECTION) ? + true : false; + + return 0; +} + + +/* + * Read antenna infos from eeprom + */ +static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + int i = 0; + + AR5K_EEPROM_READ(o++, val); + ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; + ee->ee_atn_tx_rx[mode] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 2) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3; + ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + /* Get antenna switch tables */ + ah->ah_ant_ctl[mode][AR5K_ANT_CTL] = + (ee->ee_ant_control[mode][0] << 4); + ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_A] = + ee->ee_ant_control[mode][1] | + (ee->ee_ant_control[mode][2] << 6) | + (ee->ee_ant_control[mode][3] << 12) | + (ee->ee_ant_control[mode][4] << 18) | + (ee->ee_ant_control[mode][5] << 24); + ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_B] = + ee->ee_ant_control[mode][6] | + (ee->ee_ant_control[mode][7] << 6) | + (ee->ee_ant_control[mode][8] << 12) | + (ee->ee_ant_control[mode][9] << 18) | + (ee->ee_ant_control[mode][10] << 24); + + /* return new offset */ + *offset = o; + + return 0; +} + +/* + * Read supported modes and some mode-specific calibration data + * from eeprom + */ +static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + + ee->ee_n_piers[mode] = 0; + AR5K_EEPROM_READ(o++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + switch (mode) { + case AR5K_EEPROM_MODE_11A: + ee->ee_ob[mode][3] = (val >> 5) & 0x7; + ee->ee_db[mode][3] = (val >> 2) & 0x7; + ee->ee_ob[mode][2] = (val << 1) & 0x7; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ob[mode][2] |= (val >> 15) & 0x1; + ee->ee_db[mode][2] = (val >> 12) & 0x7; + ee->ee_ob[mode][1] = (val >> 9) & 0x7; + ee->ee_db[mode][1] = (val >> 6) & 0x7; + ee->ee_ob[mode][0] = (val >> 3) & 0x7; + ee->ee_db[mode][0] = val & 0x7; + break; + case AR5K_EEPROM_MODE_11G: + case AR5K_EEPROM_MODE_11B: + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; + break; + } + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff; + ee->ee_thr_62[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28; + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff; + ee->ee_tx_frm2xpa_enable[mode] = val & 0xff; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff; + + if ((val & 0xff) & 0x80) + ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1); + else + ee->ee_noise_floor_thr[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_noise_floor_thr[mode] = + mode == AR5K_EEPROM_MODE_11A ? -54 : -1; + + AR5K_EEPROM_READ(o++, val); + ee->ee_xlna_gain[mode] = (val >> 5) & 0xff; + ee->ee_x_gain[mode] = (val >> 1) & 0xf; + ee->ee_xpd[mode] = val & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && + mode != AR5K_EEPROM_MODE_11B) + ee->ee_fixed_bias[mode] = (val >> 13) & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(o++, val); + ee->ee_false_detect[mode] = (val >> 6) & 0x7f; + + if (mode == AR5K_EEPROM_MODE_11A) + ee->ee_xr_power[mode] = val & 0x3f; + else { + /* b_DB_11[bg] and b_OB_11[bg] */ + ee->ee_ob[mode][0] = val & 0x7; + ee->ee_db[mode][0] = (val >> 3) & 0x7; + } + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) { + ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN; + ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA; + } else { + ee->ee_i_gain[mode] = (val >> 13) & 0x7; + + AR5K_EEPROM_READ(o++, val); + ee->ee_i_gain[mode] |= (val << 3) & 0x38; + + if (mode == AR5K_EEPROM_MODE_11G) { + ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff; + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6) + ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; + } + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && + mode == AR5K_EEPROM_MODE_11A) { + ee->ee_i_cal[mode] = (val >> 8) & 0x3f; + ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_0) + goto done; + + /* Note: >= v5 have bg freq piers on another location + * so these freq piers are ignored for >= v5 (should be 0xff + * anyway) */ + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_1) + break; + + AR5K_EEPROM_READ(o++, val); + ee->ee_margin_tx_rx[mode] = val & 0x3f; + break; + case AR5K_EEPROM_MODE_11B: + AR5K_EEPROM_READ(o++, val); + + ee->ee_pwr_cal_b[0].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_b[0].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + ee->ee_pwr_cal_b[1].freq = + ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); + if (ee->ee_pwr_cal_b[1].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pwr_cal_b[2].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_b[2].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + break; + case AR5K_EEPROM_MODE_11G: + AR5K_EEPROM_READ(o++, val); + + ee->ee_pwr_cal_g[0].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_g[0].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + ee->ee_pwr_cal_g[1].freq = + ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); + if (ee->ee_pwr_cal_g[1].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + AR5K_EEPROM_READ(o++, val); + ee->ee_turbo_max_power[mode] = val & 0x7f; + ee->ee_xr_power[mode] = (val >> 7) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pwr_cal_g[2].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_g[2].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_i_cal[mode] = (val >> 5) & 0x3f; + ee->ee_q_cal[mode] = val & 0x1f; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { + AR5K_EEPROM_READ(o++, val); + ee->ee_cck_ofdm_gain_delta = val & 0xff; + } + break; + } + + /* + * Read turbo mode information on newer EEPROM versions + */ + if (ee->ee_version < AR5K_EEPROM_VERSION_5_0) + goto done; + + switch (mode) { + case AR5K_EEPROM_MODE_11A: + ee->ee_switch_settling_turbo[mode] = (val >> 6) & 0x7f; + + ee->ee_atn_tx_rx_turbo[mode] = (val >> 13) & 0x7; + AR5K_EEPROM_READ(o++, val); + ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x7) << 3; + ee->ee_margin_tx_rx_turbo[mode] = (val >> 3) & 0x3f; + + ee->ee_adc_desired_size_turbo[mode] = (val >> 9) & 0x7f; + AR5K_EEPROM_READ(o++, val); + ee->ee_adc_desired_size_turbo[mode] |= (val & 0x1) << 7; + ee->ee_pga_desired_size_turbo[mode] = (val >> 1) & 0xff; + + if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >= 2) + ee->ee_pd_gain_overlap = (val >> 9) & 0xf; + break; + case AR5K_EEPROM_MODE_11G: + ee->ee_switch_settling_turbo[mode] = (val >> 8) & 0x7f; + + ee->ee_atn_tx_rx_turbo[mode] = (val >> 15) & 0x7; + AR5K_EEPROM_READ(o++, val); + ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x1f) << 1; + ee->ee_margin_tx_rx_turbo[mode] = (val >> 5) & 0x3f; + + ee->ee_adc_desired_size_turbo[mode] = (val >> 11) & 0x7f; + AR5K_EEPROM_READ(o++, val); + ee->ee_adc_desired_size_turbo[mode] |= (val & 0x7) << 5; + ee->ee_pga_desired_size_turbo[mode] = (val >> 3) & 0xff; + break; + } + +done: + /* return new offset */ + *offset = o; + + return 0; +} + +/* Read mode-specific data (except power calibration data) */ +static int +ath5k_eeprom_init_modes(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 mode_offset[3]; + unsigned int mode; + u32 offset; + int ret; + + /* + * Get values for all modes + */ + mode_offset[AR5K_EEPROM_MODE_11A] = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); + mode_offset[AR5K_EEPROM_MODE_11B] = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); + mode_offset[AR5K_EEPROM_MODE_11G] = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); + + ee->ee_turbo_max_power[AR5K_EEPROM_MODE_11A] = + AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) { + offset = mode_offset[mode]; + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + } + + /* override for older eeprom versions for better performance */ + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) { + ee->ee_thr_62[AR5K_EEPROM_MODE_11A] = 15; + ee->ee_thr_62[AR5K_EEPROM_MODE_11B] = 28; + ee->ee_thr_62[AR5K_EEPROM_MODE_11G] = 28; + } + + return 0; +} + +/* Read the frequency piers for each mode (mostly used on newer eeproms with 0xff + * frequency mask) */ +static inline int +ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max, + struct ath5k_chan_pcal_info *pc, unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + int o = *offset; + int i = 0; + u8 freq1, freq2; + u16 val; + + ee->ee_n_piers[mode] = 0; + while (i < max) { + AR5K_EEPROM_READ(o++, val); + + freq1 = val & 0xff; + if (!freq1) + break; + + pc[i++].freq = ath5k_eeprom_bin2freq(ee, + freq1, mode); + ee->ee_n_piers[mode]++; + + freq2 = (val >> 8) & 0xff; + if (!freq2) + break; + + pc[i++].freq = ath5k_eeprom_bin2freq(ee, + freq2, mode); + ee->ee_n_piers[mode]++; + } + + /* return new offset */ + *offset = o; + + return 0; +} + +/* Read frequency piers for 802.11a */ +static int +ath5k_eeprom_init_11a_pcal_freq(struct ath5k_hw *ah, int offset) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcal = ee->ee_pwr_cal_a; + int i; + u16 val; + u8 mask; + + if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) { + ath5k_eeprom_read_freq_list(ah, &offset, + AR5K_EEPROM_N_5GHZ_CHAN, pcal, + AR5K_EEPROM_MODE_11A); + } else { + mask = AR5K_EEPROM_FREQ_M(ah->ah_ee_version); + + AR5K_EEPROM_READ(offset++, val); + pcal[0].freq = (val >> 9) & mask; + pcal[1].freq = (val >> 2) & mask; + pcal[2].freq = (val << 5) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[2].freq |= (val >> 11) & 0x1f; + pcal[3].freq = (val >> 4) & mask; + pcal[4].freq = (val << 3) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[4].freq |= (val >> 13) & 0x7; + pcal[5].freq = (val >> 6) & mask; + pcal[6].freq = (val << 1) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[6].freq |= (val >> 15) & 0x1; + pcal[7].freq = (val >> 8) & mask; + pcal[8].freq = (val >> 1) & mask; + pcal[9].freq = (val << 6) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[9].freq |= (val >> 10) & 0x3f; + + /* Fixed number of piers */ + ee->ee_n_piers[AR5K_EEPROM_MODE_11A] = 10; + + for (i = 0; i < AR5K_EEPROM_N_5GHZ_CHAN; i++) { + pcal[i].freq = ath5k_eeprom_bin2freq(ee, + pcal[i].freq, AR5K_EEPROM_MODE_11A); + } + } + + return 0; +} + +/* Read frequency piers for 802.11bg on eeprom versions >= 5 and eemap >= 2 */ +static inline int +ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcal; + + switch (mode) { + case AR5K_EEPROM_MODE_11B: + pcal = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + pcal = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + ath5k_eeprom_read_freq_list(ah, &offset, + AR5K_EEPROM_N_2GHZ_CHAN_2413, pcal, + mode); + + return 0; +} + + +/* + * Read power calibration for RF5111 chips + * + * For RF5111 we have an XPD -eXternal Power Detector- curve + * for each calibrated channel. Each curve has 0,5dB Power steps + * on x axis and PCDAC steps (offsets) on y axis and looks like an + * exponential function. To recreate the curve we read 11 points + * here and interpolate later. + */ + +/* Used to match PCDAC steps with power values on RF5111 chips + * (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC + * steps that match with the power values we read from eeprom. On + * older eeprom versions (< 3.2) these steps are equally spaced at + * 10% of the pcdac curve -until the curve reaches its maximum- + * (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2) + * these 11 steps are spaced in a different way. This function returns + * the pcdac steps based on eeprom version and curve min/max so that we + * can have pcdac/pwr points. + */ +static inline void +ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp) +{ + static const u16 intercepts3[] = { + 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 + }; + static const u16 intercepts3_2[] = { + 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 + }; + const u16 *ip; + int i; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2) + ip = intercepts3_2; + else + ip = intercepts3; + + for (i = 0; i < ARRAY_SIZE(intercepts3); i++) + vp[i] = (ip[i] * max + (100 - ip[i]) * min) / 100; +} + +static int +ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *chinfo; + u8 pier, pdg; + + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + if (!chinfo[pier].pd_curves) + continue; + + for (pdg = 0; pdg < AR5K_EEPROM_N_PD_CURVES; pdg++) { + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[pdg]; + + kfree(pd->pd_step); + kfree(pd->pd_pwr); + } + + kfree(chinfo[pier].pd_curves); + } + + return 0; +} + +/* Convert RF5111 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5111 *pcinfo; + struct ath5k_pdgain_info *pd; + u8 pier, point, idx; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf5111_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + kcalloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info), + GFP_KERNEL); + + if (!chinfo[pier].pd_curves) + goto err_out; + + /* Only one curve for RF5111 + * find out which one and place + * in pd_curves. + * Note: ee_x_gain is reversed here */ + for (idx = 0; idx < AR5K_EEPROM_N_PD_CURVES; idx++) { + + if (!((ee->ee_x_gain[mode] >> idx) & 0x1)) { + pdgain_idx[0] = idx; + break; + } + } + + ee->ee_pd_gains[mode] = 1; + + pd = &chinfo[pier].pd_curves[idx]; + + pd->pd_points = AR5K_EEPROM_N_PWR_POINTS_5111; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111, + sizeof(u8), GFP_KERNEL); + if (!pd->pd_step) + goto err_out; + + pd->pd_pwr = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111, + sizeof(s16), GFP_KERNEL); + if (!pd->pd_pwr) + goto err_out; + + /* Fill raw dataset + * (convert power to 0.25dB units + * for RF5112 compatibility) */ + for (point = 0; point < pd->pd_points; point++) { + + /* Absolute values */ + pd->pd_pwr[point] = 2 * pcinfo->pwr[point]; + + /* Already sorted */ + pd->pd_step[point] = pcinfo->pcdac[point]; + } + + /* Set min/max pwr */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + chinfo[pier].max_pwr = pd->pd_pwr[10]; + + } + + return 0; + +err_out: + ath5k_eeprom_free_pcal_info(ah, mode); + return -ENOMEM; +} + +/* Parse EEPROM data */ +static int +ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcal; + int offset, ret; + int i; + u16 val; + + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + + ret = ath5k_eeprom_init_11a_pcal_freq(ah, + offset + AR5K_EEPROM_GROUP1_OFFSET); + if (ret < 0) + return ret; + + offset += AR5K_EEPROM_GROUP2_OFFSET; + pcal = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header) && + !AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + + pcal = ee->ee_pwr_cal_b; + offset += AR5K_EEPROM_GROUP3_OFFSET; + + /* fixed piers */ + pcal[0].freq = 2412; + pcal[1].freq = 2447; + pcal[2].freq = 2484; + ee->ee_n_piers[mode] = 3; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + + pcal = ee->ee_pwr_cal_g; + offset += AR5K_EEPROM_GROUP4_OFFSET; + + /* fixed piers */ + pcal[0].freq = 2312; + pcal[1].freq = 2412; + pcal[2].freq = 2484; + ee->ee_n_piers[mode] = 3; + break; + default: + return -EINVAL; + } + + for (i = 0; i < ee->ee_n_piers[mode]; i++) { + struct ath5k_chan_pcal_info_rf5111 *cdata = + &pcal[i].rf5111_info; + + AR5K_EEPROM_READ(offset++, val); + cdata->pcdac_max = ((val >> 10) & AR5K_EEPROM_PCDAC_M); + cdata->pcdac_min = ((val >> 4) & AR5K_EEPROM_PCDAC_M); + cdata->pwr[0] = ((val << 2) & AR5K_EEPROM_POWER_M); + + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[0] |= ((val >> 14) & 0x3); + cdata->pwr[1] = ((val >> 8) & AR5K_EEPROM_POWER_M); + cdata->pwr[2] = ((val >> 2) & AR5K_EEPROM_POWER_M); + cdata->pwr[3] = ((val << 4) & AR5K_EEPROM_POWER_M); + + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[3] |= ((val >> 12) & 0xf); + cdata->pwr[4] = ((val >> 6) & AR5K_EEPROM_POWER_M); + cdata->pwr[5] = (val & AR5K_EEPROM_POWER_M); + + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[6] = ((val >> 10) & AR5K_EEPROM_POWER_M); + cdata->pwr[7] = ((val >> 4) & AR5K_EEPROM_POWER_M); + cdata->pwr[8] = ((val << 2) & AR5K_EEPROM_POWER_M); + + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[8] |= ((val >> 14) & 0x3); + cdata->pwr[9] = ((val >> 8) & AR5K_EEPROM_POWER_M); + cdata->pwr[10] = ((val >> 2) & AR5K_EEPROM_POWER_M); + + ath5k_get_pcdac_intercepts(ah, cdata->pcdac_min, + cdata->pcdac_max, cdata->pcdac); + } + + return ath5k_eeprom_convert_pcal_info_5111(ah, mode, pcal); +} + + +/* + * Read power calibration for RF5112 chips + * + * For RF5112 we have 4 XPD -eXternal Power Detector- curves + * for each calibrated channel on 0, -6, -12 and -18dBm but we only + * use the higher (3) and the lower (0) curves. Each curve has 0.5dB + * power steps on x axis and PCDAC steps on y axis and looks like a + * linear function. To recreate the curve and pass the power values + * on hw, we read 4 points for xpd 0 (lower gain -> max power) + * and 3 points for xpd 3 (higher gain -> lower power) here and + * interpolate later. + * + * Note: Many vendors just use xpd 0 so xpd 3 is zeroed. + */ + +/* Convert RF5112 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_5112(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5112 *pcinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + unsigned int pier, pdg, point; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf5112_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + kcalloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info), + GFP_KERNEL); + + if (!chinfo[pier].pd_curves) + goto err_out; + + /* Fill pd_curves */ + for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + + u8 idx = pdgain_idx[pdg]; + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[idx]; + + /* Lowest gain curve (max power) */ + if (pdg == 0) { + /* One more point for better accuracy */ + pd->pd_points = AR5K_EEPROM_N_XPD0_POINTS; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(pd->pd_points, + sizeof(u8), GFP_KERNEL); + + if (!pd->pd_step) + goto err_out; + + pd->pd_pwr = kcalloc(pd->pd_points, + sizeof(s16), GFP_KERNEL); + + if (!pd->pd_pwr) + goto err_out; + + /* Fill raw dataset + * (all power levels are in 0.25dB units) */ + pd->pd_step[0] = pcinfo->pcdac_x0[0]; + pd->pd_pwr[0] = pcinfo->pwr_x0[0]; + + for (point = 1; point < pd->pd_points; + point++) { + /* Absolute values */ + pd->pd_pwr[point] = + pcinfo->pwr_x0[point]; + + /* Deltas */ + pd->pd_step[point] = + pd->pd_step[point - 1] + + pcinfo->pcdac_x0[point]; + } + + /* Set min power for this frequency */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + + /* Highest gain curve (min power) */ + } else if (pdg == 1) { + + pd->pd_points = AR5K_EEPROM_N_XPD3_POINTS; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(pd->pd_points, + sizeof(u8), GFP_KERNEL); + + if (!pd->pd_step) + goto err_out; + + pd->pd_pwr = kcalloc(pd->pd_points, + sizeof(s16), GFP_KERNEL); + + if (!pd->pd_pwr) + goto err_out; + + /* Fill raw dataset + * (all power levels are in 0.25dB units) */ + for (point = 0; point < pd->pd_points; + point++) { + /* Absolute values */ + pd->pd_pwr[point] = + pcinfo->pwr_x3[point]; + + /* Fixed points */ + pd->pd_step[point] = + pcinfo->pcdac_x3[point]; + } + + /* Since we have a higher gain curve + * override min power */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + } + } + } + + return 0; + +err_out: + ath5k_eeprom_free_pcal_info(ah, mode); + return -ENOMEM; +} + +/* Parse EEPROM data */ +static int +ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5112 *chan_pcal_info; + struct ath5k_chan_pcal_info *gen_chan_info; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + u32 offset; + u8 i, c; + u16 val; + u8 pd_gains = 0; + + /* Count how many curves we have and + * identify them (which one of the 4 + * available curves we have on each count). + * Curves are stored from lower (x0) to + * higher (x3) gain */ + for (i = 0; i < AR5K_EEPROM_N_PD_CURVES; i++) { + /* ee_x_gain[mode] is x gain mask */ + if ((ee->ee_x_gain[mode] >> i) & 0x1) + pdgain_idx[pd_gains++] = i; + } + ee->ee_pd_gains[mode] = pd_gains; + + if (pd_gains == 0 || pd_gains > 2) + return -EINVAL; + + switch (mode) { + case AR5K_EEPROM_MODE_11A: + /* + * Read 5GHz EEPROM channels + */ + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + ath5k_eeprom_init_11a_pcal_freq(ah, offset); + + offset += AR5K_EEPROM_GROUP2_OFFSET; + gen_chan_info = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + if (AR5K_EEPROM_HDR_11A(ee->ee_header)) + offset += AR5K_EEPROM_GROUP3_OFFSET; + + /* NB: frequency piers parsed during mode init */ + gen_chan_info = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + if (AR5K_EEPROM_HDR_11A(ee->ee_header)) + offset += AR5K_EEPROM_GROUP4_OFFSET; + else if (AR5K_EEPROM_HDR_11B(ee->ee_header)) + offset += AR5K_EEPROM_GROUP2_OFFSET; + + /* NB: frequency piers parsed during mode init */ + gen_chan_info = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + for (i = 0; i < ee->ee_n_piers[mode]; i++) { + chan_pcal_info = &gen_chan_info[i].rf5112_info; + + /* Power values in quarter dB + * for the lower xpd gain curve + * (0 dBm -> higher output power) */ + for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) { + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr_x0[c] = (s8) (val & 0xff); + chan_pcal_info->pwr_x0[++c] = (s8) ((val >> 8) & 0xff); + } + + /* PCDAC steps + * corresponding to the above power + * measurements */ + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pcdac_x0[1] = (val & 0x1f); + chan_pcal_info->pcdac_x0[2] = ((val >> 5) & 0x1f); + chan_pcal_info->pcdac_x0[3] = ((val >> 10) & 0x1f); + + /* Power values in quarter dB + * for the higher xpd gain curve + * (18 dBm -> lower output power) */ + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr_x3[0] = (s8) (val & 0xff); + chan_pcal_info->pwr_x3[1] = (s8) ((val >> 8) & 0xff); + + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr_x3[2] = (val & 0xff); + + /* PCDAC steps + * corresponding to the above power + * measurements (fixed) */ + chan_pcal_info->pcdac_x3[0] = 20; + chan_pcal_info->pcdac_x3[1] = 35; + chan_pcal_info->pcdac_x3[2] = 63; + + if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) { + chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0x3f); + + /* Last xpd0 power level is also channel maximum */ + gen_chan_info[i].max_pwr = chan_pcal_info->pwr_x0[3]; + } else { + chan_pcal_info->pcdac_x0[0] = 1; + gen_chan_info[i].max_pwr = (s8) ((val >> 8) & 0xff); + } + + } + + return ath5k_eeprom_convert_pcal_info_5112(ah, mode, gen_chan_info); +} + + +/* + * Read power calibration for RF2413 chips + * + * For RF2413 we have a Power to PDDAC table (Power Detector) + * instead of a PCDAC and 4 pd gain curves for each calibrated channel. + * Each curve has power on x axis in 0.5 db steps and PDDADC steps on y + * axis and looks like an exponential function like the RF5111 curve. + * + * To recreate the curves we read here the points and interpolate + * later. Note that in most cases only 2 (higher and lower) curves are + * used (like RF5112) but vendors have the opportunity to include all + * 4 curves on eeprom. The final curve (higher power) has an extra + * point for better accuracy like RF5112. + */ + +/* For RF2413 power calibration data doesn't start on a fixed location and + * if a mode is not supported, its section is missing -not zeroed-. + * So we need to calculate the starting offset for each section by using + * these two functions */ + +/* Return the size of each section based on the mode and the number of pd + * gains available (maximum 4). */ +static inline unsigned int +ath5k_pdgains_size_2413(struct ath5k_eeprom_info *ee, unsigned int mode) +{ + static const unsigned int pdgains_size[] = { 4, 6, 9, 12 }; + unsigned int sz; + + sz = pdgains_size[ee->ee_pd_gains[mode] - 1]; + sz *= ee->ee_n_piers[mode]; + + return sz; +} + +/* Return the starting offset for a section based on the modes supported + * and each section's size. */ +static unsigned int +ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode) +{ + u32 offset = AR5K_EEPROM_CAL_DATA_START(ee->ee_misc4); + + switch (mode) { + case AR5K_EEPROM_MODE_11G: + if (AR5K_EEPROM_HDR_11B(ee->ee_header)) + offset += ath5k_pdgains_size_2413(ee, + AR5K_EEPROM_MODE_11B) + + AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; + /* fall through */ + case AR5K_EEPROM_MODE_11B: + if (AR5K_EEPROM_HDR_11A(ee->ee_header)) + offset += ath5k_pdgains_size_2413(ee, + AR5K_EEPROM_MODE_11A) + + AR5K_EEPROM_N_5GHZ_CHAN / 2; + /* fall through */ + case AR5K_EEPROM_MODE_11A: + break; + default: + break; + } + + return offset; +} + +/* Convert RF2413 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf2413 *pcinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + unsigned int pier, pdg, point; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf2413_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + kcalloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info), + GFP_KERNEL); + + if (!chinfo[pier].pd_curves) + goto err_out; + + /* Fill pd_curves */ + for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + + u8 idx = pdgain_idx[pdg]; + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[idx]; + + /* One more point for the highest power + * curve (lowest gain) */ + if (pdg == ee->ee_pd_gains[mode] - 1) + pd->pd_points = AR5K_EEPROM_N_PD_POINTS; + else + pd->pd_points = AR5K_EEPROM_N_PD_POINTS - 1; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(pd->pd_points, + sizeof(u8), GFP_KERNEL); + + if (!pd->pd_step) + goto err_out; + + pd->pd_pwr = kcalloc(pd->pd_points, + sizeof(s16), GFP_KERNEL); + + if (!pd->pd_pwr) + goto err_out; + + /* Fill raw dataset + * convert all pwr levels to + * quarter dB for RF5112 compatibility */ + pd->pd_step[0] = pcinfo->pddac_i[pdg]; + pd->pd_pwr[0] = 4 * pcinfo->pwr_i[pdg]; + + for (point = 1; point < pd->pd_points; point++) { + + pd->pd_pwr[point] = pd->pd_pwr[point - 1] + + 2 * pcinfo->pwr[pdg][point - 1]; + + pd->pd_step[point] = pd->pd_step[point - 1] + + pcinfo->pddac[pdg][point - 1]; + + } + + /* Highest gain curve -> min power */ + if (pdg == 0) + chinfo[pier].min_pwr = pd->pd_pwr[0]; + + /* Lowest gain curve -> max power */ + if (pdg == ee->ee_pd_gains[mode] - 1) + chinfo[pier].max_pwr = + pd->pd_pwr[pd->pd_points - 1]; + } + } + + return 0; + +err_out: + ath5k_eeprom_free_pcal_info(ah, mode); + return -ENOMEM; +} + +/* Parse EEPROM data */ +static int +ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf2413 *pcinfo; + struct ath5k_chan_pcal_info *chinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + u32 offset; + int idx, i; + u16 val; + u8 pd_gains = 0; + + /* Count how many curves we have and + * identify them (which one of the 4 + * available curves we have on each count). + * Curves are stored from higher to + * lower gain so we go backwards */ + for (idx = AR5K_EEPROM_N_PD_CURVES - 1; idx >= 0; idx--) { + /* ee_x_gain[mode] is x gain mask */ + if ((ee->ee_x_gain[mode] >> idx) & 0x1) + pdgain_idx[pd_gains++] = idx; + + } + ee->ee_pd_gains[mode] = pd_gains; + + if (pd_gains == 0) + return -EINVAL; + + offset = ath5k_cal_data_offset_2413(ee, mode); + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + + ath5k_eeprom_init_11a_pcal_freq(ah, offset); + offset += AR5K_EEPROM_N_5GHZ_CHAN / 2; + chinfo = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) + return 0; + + ath5k_eeprom_init_11bg_2413(ah, mode, offset); + offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; + chinfo = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + + ath5k_eeprom_init_11bg_2413(ah, mode, offset); + offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; + chinfo = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + for (i = 0; i < ee->ee_n_piers[mode]; i++) { + pcinfo = &chinfo[i].rf2413_info; + + /* + * Read pwr_i, pddac_i and the first + * 2 pd points (pwr, pddac) + */ + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr_i[0] = val & 0x1f; + pcinfo->pddac_i[0] = (val >> 5) & 0x7f; + pcinfo->pwr[0][0] = (val >> 12) & 0xf; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[0][0] = val & 0x3f; + pcinfo->pwr[0][1] = (val >> 6) & 0xf; + pcinfo->pddac[0][1] = (val >> 10) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[0][2] = val & 0xf; + pcinfo->pddac[0][2] = (val >> 4) & 0x3f; + + pcinfo->pwr[0][3] = 0; + pcinfo->pddac[0][3] = 0; + + if (pd_gains > 1) { + /* + * Pd gain 0 is not the last pd gain + * so it only has 2 pd points. + * Continue with pd gain 1. + */ + pcinfo->pwr_i[1] = (val >> 10) & 0x1f; + + pcinfo->pddac_i[1] = (val >> 15) & 0x1; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac_i[1] |= (val & 0x3F) << 1; + + pcinfo->pwr[1][0] = (val >> 6) & 0xf; + pcinfo->pddac[1][0] = (val >> 10) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[1][1] = val & 0xf; + pcinfo->pddac[1][1] = (val >> 4) & 0x3f; + pcinfo->pwr[1][2] = (val >> 10) & 0xf; + + pcinfo->pddac[1][2] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[1][2] |= (val & 0xF) << 2; + + pcinfo->pwr[1][3] = 0; + pcinfo->pddac[1][3] = 0; + } else if (pd_gains == 1) { + /* + * Pd gain 0 is the last one so + * read the extra point. + */ + pcinfo->pwr[0][3] = (val >> 10) & 0xf; + + pcinfo->pddac[0][3] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[0][3] |= (val & 0xF) << 2; + } + + /* + * Proceed with the other pd_gains + * as above. + */ + if (pd_gains > 2) { + pcinfo->pwr_i[2] = (val >> 4) & 0x1f; + pcinfo->pddac_i[2] = (val >> 9) & 0x7f; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[2][0] = (val >> 0) & 0xf; + pcinfo->pddac[2][0] = (val >> 4) & 0x3f; + pcinfo->pwr[2][1] = (val >> 10) & 0xf; + + pcinfo->pddac[2][1] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[2][1] |= (val & 0xF) << 2; + + pcinfo->pwr[2][2] = (val >> 4) & 0xf; + pcinfo->pddac[2][2] = (val >> 8) & 0x3f; + + pcinfo->pwr[2][3] = 0; + pcinfo->pddac[2][3] = 0; + } else if (pd_gains == 2) { + pcinfo->pwr[1][3] = (val >> 4) & 0xf; + pcinfo->pddac[1][3] = (val >> 8) & 0x3f; + } + + if (pd_gains > 3) { + pcinfo->pwr_i[3] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr_i[3] |= ((val >> 0) & 0x7) << 2; + + pcinfo->pddac_i[3] = (val >> 3) & 0x7f; + pcinfo->pwr[3][0] = (val >> 10) & 0xf; + pcinfo->pddac[3][0] = (val >> 14) & 0x3; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[3][0] |= (val & 0xF) << 2; + pcinfo->pwr[3][1] = (val >> 4) & 0xf; + pcinfo->pddac[3][1] = (val >> 8) & 0x3f; + + pcinfo->pwr[3][2] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[3][2] |= ((val >> 0) & 0x3) << 2; + + pcinfo->pddac[3][2] = (val >> 2) & 0x3f; + pcinfo->pwr[3][3] = (val >> 8) & 0xf; + + pcinfo->pddac[3][3] = (val >> 12) & 0xF; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[3][3] |= ((val >> 0) & 0x3) << 4; + } else if (pd_gains == 3) { + pcinfo->pwr[2][3] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[2][3] |= ((val >> 0) & 0x3) << 2; + + pcinfo->pddac[2][3] = (val >> 2) & 0x3f; + } + } + + return ath5k_eeprom_convert_pcal_info_2413(ah, mode, chinfo); +} + + +/* + * Read per rate target power (this is the maximum tx power + * supported by the card). This info is used when setting + * tx power, no matter the channel. + * + * This also works for v5 EEPROMs. + */ +static int +ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_rate_pcal_info *rate_pcal_info; + u8 *rate_target_pwr_num; + u32 offset; + u16 val; + int i; + + offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1); + rate_target_pwr_num = &ee->ee_rate_target_pwr_num[mode]; + switch (mode) { + case AR5K_EEPROM_MODE_11A: + offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version); + rate_pcal_info = ee->ee_rate_tpwr_a; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN; + break; + case AR5K_EEPROM_MODE_11B: + offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version); + rate_pcal_info = ee->ee_rate_tpwr_b; + ee->ee_rate_target_pwr_num[mode] = 2; /* 3rd is g mode's 1st */ + break; + case AR5K_EEPROM_MODE_11G: + offset += AR5K_EEPROM_TARGET_PWR_OFF_11G(ee->ee_version); + rate_pcal_info = ee->ee_rate_tpwr_g; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_2GHZ_CHAN; + break; + default: + return -EINVAL; + } + + /* Different freq mask for older eeproms (<= v3.2) */ + if (ee->ee_version <= AR5K_EEPROM_VERSION_3_2) { + for (i = 0; i < (*rate_target_pwr_num); i++) { + AR5K_EEPROM_READ(offset++, val); + rate_pcal_info[i].freq = + ath5k_eeprom_bin2freq(ee, (val >> 9) & 0x7f, mode); + + rate_pcal_info[i].target_power_6to24 = ((val >> 3) & 0x3f); + rate_pcal_info[i].target_power_36 = (val << 3) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + + if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS || + val == 0) { + (*rate_target_pwr_num) = i; + break; + } + + rate_pcal_info[i].target_power_36 |= ((val >> 13) & 0x7); + rate_pcal_info[i].target_power_48 = ((val >> 7) & 0x3f); + rate_pcal_info[i].target_power_54 = ((val >> 1) & 0x3f); + } + } else { + for (i = 0; i < (*rate_target_pwr_num); i++) { + AR5K_EEPROM_READ(offset++, val); + rate_pcal_info[i].freq = + ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); + + rate_pcal_info[i].target_power_6to24 = ((val >> 2) & 0x3f); + rate_pcal_info[i].target_power_36 = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + + if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS || + val == 0) { + (*rate_target_pwr_num) = i; + break; + } + + rate_pcal_info[i].target_power_36 |= (val >> 12) & 0xf; + rate_pcal_info[i].target_power_48 = ((val >> 6) & 0x3f); + rate_pcal_info[i].target_power_54 = (val & 0x3f); + } + } + + return 0; +} + + +/* + * Read per channel calibration info from EEPROM + * + * This info is used to calibrate the baseband power table. Imagine + * that for each channel there is a power curve that's hw specific + * (depends on amplifier etc) and we try to "correct" this curve using + * offsets we pass on to phy chip (baseband -> before amplifier) so that + * it can use accurate power values when setting tx power (takes amplifier's + * performance on each channel into account). + * + * EEPROM provides us with the offsets for some pre-calibrated channels + * and we have to interpolate to create the full table for these channels and + * also the table for any channel. + */ +static int +ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + int (*read_pcal)(struct ath5k_hw *hw, int mode); + int mode; + int err; + + if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) && + (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 1)) + read_pcal = ath5k_eeprom_read_pcal_info_5112; + else if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0) && + (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 2)) + read_pcal = ath5k_eeprom_read_pcal_info_2413; + else + read_pcal = ath5k_eeprom_read_pcal_info_5111; + + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; + mode++) { + err = read_pcal(ah, mode); + if (err) + return err; + + err = ath5k_eeprom_read_target_rate_pwr_info(ah, mode); + if (err < 0) + return err; + } + + return 0; +} + +/* Read conformance test limits used for regulatory control */ +static int +ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_edge_power *rep; + unsigned int fmask, pmask; + unsigned int ctl_mode; + int i, j; + u32 offset; + u16 val; + + pmask = AR5K_EEPROM_POWER_M; + fmask = AR5K_EEPROM_FREQ_M(ee->ee_version); + offset = AR5K_EEPROM_CTL(ee->ee_version); + ee->ee_ctls = AR5K_EEPROM_N_CTLS(ee->ee_version); + for (i = 0; i < ee->ee_ctls; i += 2) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_ctl[i] = (val >> 8) & 0xff; + ee->ee_ctl[i + 1] = val & 0xff; + } + + offset = AR5K_EEPROM_GROUP8_OFFSET; + if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0) + offset += AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) - + AR5K_EEPROM_GROUP5_OFFSET; + else + offset += AR5K_EEPROM_GROUPS_START(ee->ee_version); + + rep = ee->ee_ctl_pwr; + for (i = 0; i < ee->ee_ctls; i++) { + switch (ee->ee_ctl[i] & AR5K_CTL_MODE_M) { + case AR5K_CTL_11A: + case AR5K_CTL_TURBO: + ctl_mode = AR5K_EEPROM_MODE_11A; + break; + default: + ctl_mode = AR5K_EEPROM_MODE_11G; + break; + } + if (ee->ee_ctl[i] == 0) { + if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) + offset += 8; + else + offset += 7; + rep += AR5K_EEPROM_N_EDGES; + continue; + } + if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) { + for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) { + AR5K_EEPROM_READ(offset++, val); + rep[j].freq = (val >> 8) & fmask; + rep[j + 1].freq = val & fmask; + } + for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) { + AR5K_EEPROM_READ(offset++, val); + rep[j].edge = (val >> 8) & pmask; + rep[j].flag = (val >> 14) & 1; + rep[j + 1].edge = val & pmask; + rep[j + 1].flag = (val >> 6) & 1; + } + } else { + AR5K_EEPROM_READ(offset++, val); + rep[0].freq = (val >> 9) & fmask; + rep[1].freq = (val >> 2) & fmask; + rep[2].freq = (val << 5) & fmask; + + AR5K_EEPROM_READ(offset++, val); + rep[2].freq |= (val >> 11) & 0x1f; + rep[3].freq = (val >> 4) & fmask; + rep[4].freq = (val << 3) & fmask; + + AR5K_EEPROM_READ(offset++, val); + rep[4].freq |= (val >> 13) & 0x7; + rep[5].freq = (val >> 6) & fmask; + rep[6].freq = (val << 1) & fmask; + + AR5K_EEPROM_READ(offset++, val); + rep[6].freq |= (val >> 15) & 0x1; + rep[7].freq = (val >> 8) & fmask; + + rep[0].edge = (val >> 2) & pmask; + rep[1].edge = (val << 4) & pmask; + + AR5K_EEPROM_READ(offset++, val); + rep[1].edge |= (val >> 12) & 0xf; + rep[2].edge = (val >> 6) & pmask; + rep[3].edge = val & pmask; + + AR5K_EEPROM_READ(offset++, val); + rep[4].edge = (val >> 10) & pmask; + rep[5].edge = (val >> 4) & pmask; + rep[6].edge = (val << 2) & pmask; + + AR5K_EEPROM_READ(offset++, val); + rep[6].edge |= (val >> 14) & 0x3; + rep[7].edge = (val >> 8) & pmask; + } + for (j = 0; j < AR5K_EEPROM_N_EDGES; j++) { + rep[j].freq = ath5k_eeprom_bin2freq(ee, + rep[j].freq, ctl_mode); + } + rep += AR5K_EEPROM_N_EDGES; + } + + return 0; +} + +static int +ath5k_eeprom_read_spur_chans(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 offset; + u16 val; + int ret = 0, i; + + offset = AR5K_EEPROM_CTL(ee->ee_version) + + AR5K_EEPROM_N_CTLS(ee->ee_version); + + if (ee->ee_version < AR5K_EEPROM_VERSION_5_3) { + /* No spur info for 5GHz */ + ee->ee_spur_chans[0][0] = AR5K_EEPROM_NO_SPUR; + /* 2 channels for 2GHz (2464/2420) */ + ee->ee_spur_chans[0][1] = AR5K_EEPROM_5413_SPUR_CHAN_1; + ee->ee_spur_chans[1][1] = AR5K_EEPROM_5413_SPUR_CHAN_2; + ee->ee_spur_chans[2][1] = AR5K_EEPROM_NO_SPUR; + } else if (ee->ee_version >= AR5K_EEPROM_VERSION_5_3) { + for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) { + AR5K_EEPROM_READ(offset, val); + ee->ee_spur_chans[i][0] = val; + AR5K_EEPROM_READ(offset + AR5K_EEPROM_N_SPUR_CHANS, + val); + ee->ee_spur_chans[i][1] = val; + offset++; + } + } + + return ret; +} + + +/***********************\ +* Init/Detach functions * +\***********************/ + +/* + * Initialize eeprom data structure + */ +int +ath5k_eeprom_init(struct ath5k_hw *ah) +{ + int err; + + err = ath5k_eeprom_init_header(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_init_modes(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_read_pcal_info(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_read_ctl_info(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_read_spur_chans(ah); + if (err < 0) + return err; + + return 0; +} + +void +ath5k_eeprom_detach(struct ath5k_hw *ah) +{ + u8 mode; + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) + ath5k_eeprom_free_pcal_info(ah, mode); +} + +int +ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + switch (channel->hw_value) { + case AR5K_MODE_11A: + return AR5K_EEPROM_MODE_11A; + case AR5K_MODE_11G: + return AR5K_EEPROM_MODE_11G; + case AR5K_MODE_11B: + return AR5K_EEPROM_MODE_11B; + default: + ATH5K_WARN(ah, "channel is not A/B/G!"); + return AR5K_EEPROM_MODE_11A; + } +} |