diff options
Diffstat (limited to 'drivers/net/wireless/broadcom/brcm80211/brcmsmac/pmu.c')
| -rw-r--r-- | drivers/net/wireless/broadcom/brcm80211/brcmsmac/pmu.c | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/pmu.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/pmu.c new file mode 100644 index 0000000..71b8038 --- /dev/null +++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/pmu.c @@ -0,0 +1,165 @@ +/* + * Copyright (c) 2011 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/delay.h> +#include <linux/io.h> + +#include <brcm_hw_ids.h> +#include <chipcommon.h> +#include <brcmu_utils.h> +#include "pub.h" +#include "aiutils.h" +#include "pmu.h" +#include "soc.h" + +/* + * external LPO crystal frequency + */ +#define EXT_ILP_HZ 32768 + +/* + * Duration for ILP clock frequency measurment in milliseconds + * + * remark: 1000 must be an integer multiple of this duration + */ +#define ILP_CALC_DUR 10 + +/* Fields in pmucontrol */ +#define PCTL_ILP_DIV_MASK 0xffff0000 +#define PCTL_ILP_DIV_SHIFT 16 +#define PCTL_PLL_PLLCTL_UPD 0x00000400 /* rev 2 */ +#define PCTL_NOILP_ON_WAIT 0x00000200 /* rev 1 */ +#define PCTL_HT_REQ_EN 0x00000100 +#define PCTL_ALP_REQ_EN 0x00000080 +#define PCTL_XTALFREQ_MASK 0x0000007c +#define PCTL_XTALFREQ_SHIFT 2 +#define PCTL_ILP_DIV_EN 0x00000002 +#define PCTL_LPO_SEL 0x00000001 + +/* ILP clock */ +#define ILP_CLOCK 32000 + +/* ALP clock on pre-PMU chips */ +#define ALP_CLOCK 20000000 + +/* pmustatus */ +#define PST_EXTLPOAVAIL 0x0100 +#define PST_WDRESET 0x0080 +#define PST_INTPEND 0x0040 +#define PST_SBCLKST 0x0030 +#define PST_SBCLKST_ILP 0x0010 +#define PST_SBCLKST_ALP 0x0020 +#define PST_SBCLKST_HT 0x0030 +#define PST_ALPAVAIL 0x0008 +#define PST_HTAVAIL 0x0004 +#define PST_RESINIT 0x0003 + +/* PMU resource bit position */ +#define PMURES_BIT(bit) (1 << (bit)) + +/* PMU corerev and chip specific PLL controls. + * PMU<rev>_PLL<num>_XX where <rev> is PMU corerev and <num> is an arbitrary + * number to differentiate different PLLs controlled by the same PMU rev. + */ + +/* pmu XtalFreqRatio */ +#define PMU_XTALFREQ_REG_ILPCTR_MASK 0x00001FFF +#define PMU_XTALFREQ_REG_MEASURE_MASK 0x80000000 +#define PMU_XTALFREQ_REG_MEASURE_SHIFT 31 + +/* 4313 resources */ +#define RES4313_BB_PU_RSRC 0 +#define RES4313_ILP_REQ_RSRC 1 +#define RES4313_XTAL_PU_RSRC 2 +#define RES4313_ALP_AVAIL_RSRC 3 +#define RES4313_RADIO_PU_RSRC 4 +#define RES4313_BG_PU_RSRC 5 +#define RES4313_VREG1P4_PU_RSRC 6 +#define RES4313_AFE_PWRSW_RSRC 7 +#define RES4313_RX_PWRSW_RSRC 8 +#define RES4313_TX_PWRSW_RSRC 9 +#define RES4313_BB_PWRSW_RSRC 10 +#define RES4313_SYNTH_PWRSW_RSRC 11 +#define RES4313_MISC_PWRSW_RSRC 12 +#define RES4313_BB_PLL_PWRSW_RSRC 13 +#define RES4313_HT_AVAIL_RSRC 14 +#define RES4313_MACPHY_CLK_AVAIL_RSRC 15 + +u16 si_pmu_fast_pwrup_delay(struct si_pub *sih) +{ + uint delay = PMU_MAX_TRANSITION_DLY; + + switch (ai_get_chip_id(sih)) { + case BCMA_CHIP_ID_BCM43224: + case BCMA_CHIP_ID_BCM43225: + case BCMA_CHIP_ID_BCM4313: + delay = 3700; + break; + default: + break; + } + + return (u16) delay; +} + +u32 si_pmu_measure_alpclk(struct si_pub *sih) +{ + struct si_info *sii = container_of(sih, struct si_info, pub); + struct bcma_device *core; + u32 alp_khz; + + if (ai_get_pmurev(sih) < 10) + return 0; + + /* Remember original core before switch to chipc */ + core = sii->icbus->drv_cc.core; + + if (bcma_read32(core, CHIPCREGOFFS(pmustatus)) & PST_EXTLPOAVAIL) { + u32 ilp_ctr, alp_hz; + + /* + * Enable the reg to measure the freq, + * in case it was disabled before + */ + bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq), + 1U << PMU_XTALFREQ_REG_MEASURE_SHIFT); + + /* Delay for well over 4 ILP clocks */ + udelay(1000); + + /* Read the latched number of ALP ticks per 4 ILP ticks */ + ilp_ctr = bcma_read32(core, CHIPCREGOFFS(pmu_xtalfreq)) & + PMU_XTALFREQ_REG_ILPCTR_MASK; + + /* + * Turn off the PMU_XTALFREQ_REG_MEASURE_SHIFT + * bit to save power + */ + bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq), 0); + + /* Calculate ALP frequency */ + alp_hz = (ilp_ctr * EXT_ILP_HZ) / 4; + + /* + * Round to nearest 100KHz, and at + * the same time convert to KHz + */ + alp_khz = (alp_hz + 50000) / 100000 * 100; + } else + alp_khz = 0; + + return alp_khz; +} |