diff options
Diffstat (limited to 'drivers/net/wireless/ti/wlcore/io.c')
| -rw-r--r-- | drivers/net/wireless/ti/wlcore/io.c | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/drivers/net/wireless/ti/wlcore/io.c b/drivers/net/wireless/ti/wlcore/io.c new file mode 100644 index 0000000..1cc6d5a --- /dev/null +++ b/drivers/net/wireless/ti/wlcore/io.c @@ -0,0 +1,212 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2010 Nokia Corporation + * + * Contact: Luciano Coelho <luciano.coelho@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/interrupt.h> + +#include "wlcore.h" +#include "debug.h" +#include "wl12xx_80211.h" +#include "io.h" +#include "tx.h" + +bool wl1271_set_block_size(struct wl1271 *wl) +{ + if (wl->if_ops->set_block_size) { + wl->if_ops->set_block_size(wl->dev, WL12XX_BUS_BLOCK_SIZE); + return true; + } + + return false; +} + +void wlcore_disable_interrupts(struct wl1271 *wl) +{ + disable_irq(wl->irq); +} +EXPORT_SYMBOL_GPL(wlcore_disable_interrupts); + +void wlcore_disable_interrupts_nosync(struct wl1271 *wl) +{ + disable_irq_nosync(wl->irq); +} +EXPORT_SYMBOL_GPL(wlcore_disable_interrupts_nosync); + +void wlcore_enable_interrupts(struct wl1271 *wl) +{ + enable_irq(wl->irq); +} +EXPORT_SYMBOL_GPL(wlcore_enable_interrupts); + +void wlcore_synchronize_interrupts(struct wl1271 *wl) +{ + synchronize_irq(wl->irq); +} +EXPORT_SYMBOL_GPL(wlcore_synchronize_interrupts); + +int wlcore_translate_addr(struct wl1271 *wl, int addr) +{ + struct wlcore_partition_set *part = &wl->curr_part; + + /* + * To translate, first check to which window of addresses the + * particular address belongs. Then subtract the starting address + * of that window from the address. Then, add offset of the + * translated region. + * + * The translated regions occur next to each other in physical device + * memory, so just add the sizes of the preceding address regions to + * get the offset to the new region. + */ + if ((addr >= part->mem.start) && + (addr < part->mem.start + part->mem.size)) + return addr - part->mem.start; + else if ((addr >= part->reg.start) && + (addr < part->reg.start + part->reg.size)) + return addr - part->reg.start + part->mem.size; + else if ((addr >= part->mem2.start) && + (addr < part->mem2.start + part->mem2.size)) + return addr - part->mem2.start + part->mem.size + + part->reg.size; + else if ((addr >= part->mem3.start) && + (addr < part->mem3.start + part->mem3.size)) + return addr - part->mem3.start + part->mem.size + + part->reg.size + part->mem2.size; + + WARN(1, "HW address 0x%x out of range", addr); + return 0; +} +EXPORT_SYMBOL_GPL(wlcore_translate_addr); + +/* Set the partitions to access the chip addresses + * + * To simplify driver code, a fixed (virtual) memory map is defined for + * register and memory addresses. Because in the chipset, in different stages + * of operation, those addresses will move around, an address translation + * mechanism is required. + * + * There are four partitions (three memory and one register partition), + * which are mapped to two different areas of the hardware memory. + * + * Virtual address + * space + * + * | | + * ...+----+--> mem.start + * Physical address ... | | + * space ... | | [PART_0] + * ... | | + * 00000000 <--+----+... ...+----+--> mem.start + mem.size + * | | ... | | + * |MEM | ... | | + * | | ... | | + * mem.size <--+----+... | | {unused area) + * | | ... | | + * |REG | ... | | + * mem.size | | ... | | + * + <--+----+... ...+----+--> reg.start + * reg.size | | ... | | + * |MEM2| ... | | [PART_1] + * | | ... | | + * ...+----+--> reg.start + reg.size + * | | + * + */ +int wlcore_set_partition(struct wl1271 *wl, + const struct wlcore_partition_set *p) +{ + int ret; + + /* copy partition info */ + memcpy(&wl->curr_part, p, sizeof(*p)); + + wl1271_debug(DEBUG_IO, "mem_start %08X mem_size %08X", + p->mem.start, p->mem.size); + wl1271_debug(DEBUG_IO, "reg_start %08X reg_size %08X", + p->reg.start, p->reg.size); + wl1271_debug(DEBUG_IO, "mem2_start %08X mem2_size %08X", + p->mem2.start, p->mem2.size); + wl1271_debug(DEBUG_IO, "mem3_start %08X mem3_size %08X", + p->mem3.start, p->mem3.size); + + ret = wlcore_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start); + if (ret < 0) + goto out; + + ret = wlcore_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size); + if (ret < 0) + goto out; + + ret = wlcore_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start); + if (ret < 0) + goto out; + + ret = wlcore_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size); + if (ret < 0) + goto out; + + ret = wlcore_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start); + if (ret < 0) + goto out; + + ret = wlcore_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size); + if (ret < 0) + goto out; + + /* wl12xx only: We don't need the size of the last partition, + * as it is automatically calculated based on the total memory + * size and the sizes of the previous partitions. + * + * wl18xx re-defines the HW_PART3 addresses for logger over + * SDIO support. wl12xx is expecting the write to + * HW_PART3_START_ADDR at offset 24. This creates conflict + * between the addresses. + * In order to fix this the expected value is written to + * HW_PART3_SIZE_ADDR instead which is at offset 24 after changes. + */ + ret = wlcore_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start); + if (ret < 0) + goto out; + + ret = wlcore_raw_write32(wl, HW_PART3_SIZE_ADDR, p->mem3.size); + if (ret < 0) + goto out; + +out: + return ret; +} +EXPORT_SYMBOL_GPL(wlcore_set_partition); + +void wl1271_io_reset(struct wl1271 *wl) +{ + if (wl->if_ops->reset) + wl->if_ops->reset(wl->dev); +} + +void wl1271_io_init(struct wl1271 *wl) +{ + if (wl->if_ops->init) + wl->if_ops->init(wl->dev); +} |