summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/zydas/zd1211rw/zd_mac.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/zydas/zd1211rw/zd_mac.c')
-rw-r--r--drivers/net/wireless/zydas/zd1211rw/zd_mac.c1550
1 files changed, 1550 insertions, 0 deletions
diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_mac.c b/drivers/net/wireless/zydas/zd1211rw/zd_mac.c
new file mode 100644
index 0000000..3e37a04
--- /dev/null
+++ b/drivers/net/wireless/zydas/zd1211rw/zd_mac.c
@@ -0,0 +1,1550 @@
+/* ZD1211 USB-WLAN driver for Linux
+ *
+ * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
+ * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
+ * Copyright (C) 2006-2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright (C) 2007-2008 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/jiffies.h>
+#include <net/ieee80211_radiotap.h>
+
+#include "zd_def.h"
+#include "zd_chip.h"
+#include "zd_mac.h"
+#include "zd_rf.h"
+
+struct zd_reg_alpha2_map {
+ u32 reg;
+ char alpha2[2];
+};
+
+static struct zd_reg_alpha2_map reg_alpha2_map[] = {
+ { ZD_REGDOMAIN_FCC, "US" },
+ { ZD_REGDOMAIN_IC, "CA" },
+ { ZD_REGDOMAIN_ETSI, "DE" }, /* Generic ETSI, use most restrictive */
+ { ZD_REGDOMAIN_JAPAN, "JP" },
+ { ZD_REGDOMAIN_JAPAN_2, "JP" },
+ { ZD_REGDOMAIN_JAPAN_3, "JP" },
+ { ZD_REGDOMAIN_SPAIN, "ES" },
+ { ZD_REGDOMAIN_FRANCE, "FR" },
+};
+
+/* This table contains the hardware specific values for the modulation rates. */
+static const struct ieee80211_rate zd_rates[] = {
+ { .bitrate = 10,
+ .hw_value = ZD_CCK_RATE_1M, },
+ { .bitrate = 20,
+ .hw_value = ZD_CCK_RATE_2M,
+ .hw_value_short = ZD_CCK_RATE_2M | ZD_CCK_PREA_SHORT,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 55,
+ .hw_value = ZD_CCK_RATE_5_5M,
+ .hw_value_short = ZD_CCK_RATE_5_5M | ZD_CCK_PREA_SHORT,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 110,
+ .hw_value = ZD_CCK_RATE_11M,
+ .hw_value_short = ZD_CCK_RATE_11M | ZD_CCK_PREA_SHORT,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 60,
+ .hw_value = ZD_OFDM_RATE_6M,
+ .flags = 0 },
+ { .bitrate = 90,
+ .hw_value = ZD_OFDM_RATE_9M,
+ .flags = 0 },
+ { .bitrate = 120,
+ .hw_value = ZD_OFDM_RATE_12M,
+ .flags = 0 },
+ { .bitrate = 180,
+ .hw_value = ZD_OFDM_RATE_18M,
+ .flags = 0 },
+ { .bitrate = 240,
+ .hw_value = ZD_OFDM_RATE_24M,
+ .flags = 0 },
+ { .bitrate = 360,
+ .hw_value = ZD_OFDM_RATE_36M,
+ .flags = 0 },
+ { .bitrate = 480,
+ .hw_value = ZD_OFDM_RATE_48M,
+ .flags = 0 },
+ { .bitrate = 540,
+ .hw_value = ZD_OFDM_RATE_54M,
+ .flags = 0 },
+};
+
+/*
+ * Zydas retry rates table. Each line is listed in the same order as
+ * in zd_rates[] and contains all the rate used when a packet is sent
+ * starting with a given rates. Let's consider an example :
+ *
+ * "11 Mbits : 4, 3, 2, 1, 0" means :
+ * - packet is sent using 4 different rates
+ * - 1st rate is index 3 (ie 11 Mbits)
+ * - 2nd rate is index 2 (ie 5.5 Mbits)
+ * - 3rd rate is index 1 (ie 2 Mbits)
+ * - 4th rate is index 0 (ie 1 Mbits)
+ */
+
+static const struct tx_retry_rate zd_retry_rates[] = {
+ { /* 1 Mbits */ 1, { 0 }},
+ { /* 2 Mbits */ 2, { 1, 0 }},
+ { /* 5.5 Mbits */ 3, { 2, 1, 0 }},
+ { /* 11 Mbits */ 4, { 3, 2, 1, 0 }},
+ { /* 6 Mbits */ 5, { 4, 3, 2, 1, 0 }},
+ { /* 9 Mbits */ 6, { 5, 4, 3, 2, 1, 0}},
+ { /* 12 Mbits */ 5, { 6, 3, 2, 1, 0 }},
+ { /* 18 Mbits */ 6, { 7, 6, 3, 2, 1, 0 }},
+ { /* 24 Mbits */ 6, { 8, 6, 3, 2, 1, 0 }},
+ { /* 36 Mbits */ 7, { 9, 8, 6, 3, 2, 1, 0 }},
+ { /* 48 Mbits */ 8, {10, 9, 8, 6, 3, 2, 1, 0 }},
+ { /* 54 Mbits */ 9, {11, 10, 9, 8, 6, 3, 2, 1, 0 }}
+};
+
+static const struct ieee80211_channel zd_channels[] = {
+ { .center_freq = 2412, .hw_value = 1 },
+ { .center_freq = 2417, .hw_value = 2 },
+ { .center_freq = 2422, .hw_value = 3 },
+ { .center_freq = 2427, .hw_value = 4 },
+ { .center_freq = 2432, .hw_value = 5 },
+ { .center_freq = 2437, .hw_value = 6 },
+ { .center_freq = 2442, .hw_value = 7 },
+ { .center_freq = 2447, .hw_value = 8 },
+ { .center_freq = 2452, .hw_value = 9 },
+ { .center_freq = 2457, .hw_value = 10 },
+ { .center_freq = 2462, .hw_value = 11 },
+ { .center_freq = 2467, .hw_value = 12 },
+ { .center_freq = 2472, .hw_value = 13 },
+ { .center_freq = 2484, .hw_value = 14 },
+};
+
+static void housekeeping_init(struct zd_mac *mac);
+static void housekeeping_enable(struct zd_mac *mac);
+static void housekeeping_disable(struct zd_mac *mac);
+static void beacon_init(struct zd_mac *mac);
+static void beacon_enable(struct zd_mac *mac);
+static void beacon_disable(struct zd_mac *mac);
+static void set_rts_cts(struct zd_mac *mac, unsigned int short_preamble);
+static int zd_mac_config_beacon(struct ieee80211_hw *hw,
+ struct sk_buff *beacon, bool in_intr);
+
+static int zd_reg2alpha2(u8 regdomain, char *alpha2)
+{
+ unsigned int i;
+ struct zd_reg_alpha2_map *reg_map;
+ for (i = 0; i < ARRAY_SIZE(reg_alpha2_map); i++) {
+ reg_map = &reg_alpha2_map[i];
+ if (regdomain == reg_map->reg) {
+ alpha2[0] = reg_map->alpha2[0];
+ alpha2[1] = reg_map->alpha2[1];
+ return 0;
+ }
+ }
+ return 1;
+}
+
+static int zd_check_signal(struct ieee80211_hw *hw, int signal)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+
+ dev_dbg_f_cond(zd_mac_dev(mac), signal < 0 || signal > 100,
+ "%s: signal value from device not in range 0..100, "
+ "but %d.\n", __func__, signal);
+
+ if (signal < 0)
+ signal = 0;
+ else if (signal > 100)
+ signal = 100;
+
+ return signal;
+}
+
+int zd_mac_preinit_hw(struct ieee80211_hw *hw)
+{
+ int r;
+ u8 addr[ETH_ALEN];
+ struct zd_mac *mac = zd_hw_mac(hw);
+
+ r = zd_chip_read_mac_addr_fw(&mac->chip, addr);
+ if (r)
+ return r;
+
+ SET_IEEE80211_PERM_ADDR(hw, addr);
+
+ return 0;
+}
+
+int zd_mac_init_hw(struct ieee80211_hw *hw)
+{
+ int r;
+ struct zd_mac *mac = zd_hw_mac(hw);
+ struct zd_chip *chip = &mac->chip;
+ char alpha2[2];
+ u8 default_regdomain;
+
+ r = zd_chip_enable_int(chip);
+ if (r)
+ goto out;
+ r = zd_chip_init_hw(chip);
+ if (r)
+ goto disable_int;
+
+ ZD_ASSERT(!irqs_disabled());
+
+ r = zd_read_regdomain(chip, &default_regdomain);
+ if (r)
+ goto disable_int;
+ spin_lock_irq(&mac->lock);
+ mac->regdomain = mac->default_regdomain = default_regdomain;
+ spin_unlock_irq(&mac->lock);
+
+ /* We must inform the device that we are doing encryption/decryption in
+ * software at the moment. */
+ r = zd_set_encryption_type(chip, ENC_SNIFFER);
+ if (r)
+ goto disable_int;
+
+ r = zd_reg2alpha2(mac->regdomain, alpha2);
+ if (r)
+ goto disable_int;
+
+ r = regulatory_hint(hw->wiphy, alpha2);
+disable_int:
+ zd_chip_disable_int(chip);
+out:
+ return r;
+}
+
+void zd_mac_clear(struct zd_mac *mac)
+{
+ flush_workqueue(zd_workqueue);
+ zd_chip_clear(&mac->chip);
+ ZD_ASSERT(!spin_is_locked(&mac->lock));
+ ZD_MEMCLEAR(mac, sizeof(struct zd_mac));
+}
+
+static int set_rx_filter(struct zd_mac *mac)
+{
+ unsigned long flags;
+ u32 filter = STA_RX_FILTER;
+
+ spin_lock_irqsave(&mac->lock, flags);
+ if (mac->pass_ctrl)
+ filter |= RX_FILTER_CTRL;
+ spin_unlock_irqrestore(&mac->lock, flags);
+
+ return zd_iowrite32(&mac->chip, CR_RX_FILTER, filter);
+}
+
+static int set_mac_and_bssid(struct zd_mac *mac)
+{
+ int r;
+
+ if (!mac->vif)
+ return -1;
+
+ r = zd_write_mac_addr(&mac->chip, mac->vif->addr);
+ if (r)
+ return r;
+
+ /* Vendor driver after setting MAC either sets BSSID for AP or
+ * filter for other modes.
+ */
+ if (mac->type != NL80211_IFTYPE_AP)
+ return set_rx_filter(mac);
+ else
+ return zd_write_bssid(&mac->chip, mac->vif->addr);
+}
+
+static int set_mc_hash(struct zd_mac *mac)
+{
+ struct zd_mc_hash hash;
+ zd_mc_clear(&hash);
+ return zd_chip_set_multicast_hash(&mac->chip, &hash);
+}
+
+int zd_op_start(struct ieee80211_hw *hw)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+ struct zd_chip *chip = &mac->chip;
+ struct zd_usb *usb = &chip->usb;
+ int r;
+
+ if (!usb->initialized) {
+ r = zd_usb_init_hw(usb);
+ if (r)
+ goto out;
+ }
+
+ r = zd_chip_enable_int(chip);
+ if (r < 0)
+ goto out;
+
+ r = zd_chip_set_basic_rates(chip, CR_RATES_80211B | CR_RATES_80211G);
+ if (r < 0)
+ goto disable_int;
+ r = set_rx_filter(mac);
+ if (r)
+ goto disable_int;
+ r = set_mc_hash(mac);
+ if (r)
+ goto disable_int;
+
+ /* Wait after setting the multicast hash table and powering on
+ * the radio otherwise interface bring up will fail. This matches
+ * what the vendor driver did.
+ */
+ msleep(10);
+
+ r = zd_chip_switch_radio_on(chip);
+ if (r < 0) {
+ dev_err(zd_chip_dev(chip),
+ "%s: failed to set radio on\n", __func__);
+ goto disable_int;
+ }
+ r = zd_chip_enable_rxtx(chip);
+ if (r < 0)
+ goto disable_radio;
+ r = zd_chip_enable_hwint(chip);
+ if (r < 0)
+ goto disable_rxtx;
+
+ housekeeping_enable(mac);
+ beacon_enable(mac);
+ set_bit(ZD_DEVICE_RUNNING, &mac->flags);
+ return 0;
+disable_rxtx:
+ zd_chip_disable_rxtx(chip);
+disable_radio:
+ zd_chip_switch_radio_off(chip);
+disable_int:
+ zd_chip_disable_int(chip);
+out:
+ return r;
+}
+
+void zd_op_stop(struct ieee80211_hw *hw)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+ struct zd_chip *chip = &mac->chip;
+ struct sk_buff *skb;
+ struct sk_buff_head *ack_wait_queue = &mac->ack_wait_queue;
+
+ clear_bit(ZD_DEVICE_RUNNING, &mac->flags);
+
+ /* The order here deliberately is a little different from the open()
+ * method, since we need to make sure there is no opportunity for RX
+ * frames to be processed by mac80211 after we have stopped it.
+ */
+
+ zd_chip_disable_rxtx(chip);
+ beacon_disable(mac);
+ housekeeping_disable(mac);
+ flush_workqueue(zd_workqueue);
+
+ zd_chip_disable_hwint(chip);
+ zd_chip_switch_radio_off(chip);
+ zd_chip_disable_int(chip);
+
+
+ while ((skb = skb_dequeue(ack_wait_queue)))
+ dev_kfree_skb_any(skb);
+}
+
+int zd_restore_settings(struct zd_mac *mac)
+{
+ struct sk_buff *beacon;
+ struct zd_mc_hash multicast_hash;
+ unsigned int short_preamble;
+ int r, beacon_interval, beacon_period;
+ u8 channel;
+
+ dev_dbg_f(zd_mac_dev(mac), "\n");
+
+ spin_lock_irq(&mac->lock);
+ multicast_hash = mac->multicast_hash;
+ short_preamble = mac->short_preamble;
+ beacon_interval = mac->beacon.interval;
+ beacon_period = mac->beacon.period;
+ channel = mac->channel;
+ spin_unlock_irq(&mac->lock);
+
+ r = set_mac_and_bssid(mac);
+ if (r < 0) {
+ dev_dbg_f(zd_mac_dev(mac), "set_mac_and_bssid failed, %d\n", r);
+ return r;
+ }
+
+ r = zd_chip_set_channel(&mac->chip, channel);
+ if (r < 0) {
+ dev_dbg_f(zd_mac_dev(mac), "zd_chip_set_channel failed, %d\n",
+ r);
+ return r;
+ }
+
+ set_rts_cts(mac, short_preamble);
+
+ r = zd_chip_set_multicast_hash(&mac->chip, &multicast_hash);
+ if (r < 0) {
+ dev_dbg_f(zd_mac_dev(mac),
+ "zd_chip_set_multicast_hash failed, %d\n", r);
+ return r;
+ }
+
+ if (mac->type == NL80211_IFTYPE_MESH_POINT ||
+ mac->type == NL80211_IFTYPE_ADHOC ||
+ mac->type == NL80211_IFTYPE_AP) {
+ if (mac->vif != NULL) {
+ beacon = ieee80211_beacon_get(mac->hw, mac->vif);
+ if (beacon)
+ zd_mac_config_beacon(mac->hw, beacon, false);
+ }
+
+ zd_set_beacon_interval(&mac->chip, beacon_interval,
+ beacon_period, mac->type);
+
+ spin_lock_irq(&mac->lock);
+ mac->beacon.last_update = jiffies;
+ spin_unlock_irq(&mac->lock);
+ }
+
+ return 0;
+}
+
+/**
+ * zd_mac_tx_status - reports tx status of a packet if required
+ * @hw - a &struct ieee80211_hw pointer
+ * @skb - a sk-buffer
+ * @flags: extra flags to set in the TX status info
+ * @ackssi: ACK signal strength
+ * @success - True for successful transmission of the frame
+ *
+ * This information calls ieee80211_tx_status_irqsafe() if required by the
+ * control information. It copies the control information into the status
+ * information.
+ *
+ * If no status information has been requested, the skb is freed.
+ */
+static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
+ int ackssi, struct tx_status *tx_status)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ int i;
+ int success = 1, retry = 1;
+ int first_idx;
+ const struct tx_retry_rate *retries;
+
+ ieee80211_tx_info_clear_status(info);
+
+ if (tx_status) {
+ success = !tx_status->failure;
+ retry = tx_status->retry + success;
+ }
+
+ if (success) {
+ /* success */
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ } else {
+ /* failure */
+ info->flags &= ~IEEE80211_TX_STAT_ACK;
+ }
+
+ first_idx = info->status.rates[0].idx;
+ ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
+ retries = &zd_retry_rates[first_idx];
+ ZD_ASSERT(1 <= retry && retry <= retries->count);
+
+ info->status.rates[0].idx = retries->rate[0];
+ info->status.rates[0].count = 1; // (retry > 1 ? 2 : 1);
+
+ for (i=1; i<IEEE80211_TX_MAX_RATES-1 && i<retry; i++) {
+ info->status.rates[i].idx = retries->rate[i];
+ info->status.rates[i].count = 1; // ((i==retry-1) && success ? 1:2);
+ }
+ for (; i<IEEE80211_TX_MAX_RATES && i<retry; i++) {
+ info->status.rates[i].idx = retries->rate[retry - 1];
+ info->status.rates[i].count = 1; // (success ? 1:2);
+ }
+ if (i<IEEE80211_TX_MAX_RATES)
+ info->status.rates[i].idx = -1; /* terminate */
+
+ info->status.ack_signal = zd_check_signal(hw, ackssi);
+ ieee80211_tx_status_irqsafe(hw, skb);
+}
+
+/**
+ * zd_mac_tx_failed - callback for failed frames
+ * @dev: the mac80211 wireless device
+ *
+ * This function is called if a frame couldn't be successfully
+ * transferred. The first frame from the tx queue, will be selected and
+ * reported as error to the upper layers.
+ */
+void zd_mac_tx_failed(struct urb *urb)
+{
+ struct ieee80211_hw * hw = zd_usb_to_hw(urb->context);
+ struct zd_mac *mac = zd_hw_mac(hw);
+ struct sk_buff_head *q = &mac->ack_wait_queue;
+ struct sk_buff *skb;
+ struct tx_status *tx_status = (struct tx_status *)urb->transfer_buffer;
+ unsigned long flags;
+ int success = !tx_status->failure;
+ int retry = tx_status->retry + success;
+ int found = 0;
+ int i, position = 0;
+
+ q = &mac->ack_wait_queue;
+ spin_lock_irqsave(&q->lock, flags);
+
+ skb_queue_walk(q, skb) {
+ struct ieee80211_hdr *tx_hdr;
+ struct ieee80211_tx_info *info;
+ int first_idx, final_idx;
+ const struct tx_retry_rate *retries;
+ u8 final_rate;
+
+ position ++;
+
+ /* if the hardware reports a failure and we had a 802.11 ACK
+ * pending, then we skip the first skb when searching for a
+ * matching frame */
+ if (tx_status->failure && mac->ack_pending &&
+ skb_queue_is_first(q, skb)) {
+ continue;
+ }
+
+ tx_hdr = (struct ieee80211_hdr *)skb->data;
+
+ /* we skip all frames not matching the reported destination */
+ if (unlikely(!ether_addr_equal(tx_hdr->addr1, tx_status->mac)))
+ continue;
+
+ /* we skip all frames not matching the reported final rate */
+
+ info = IEEE80211_SKB_CB(skb);
+ first_idx = info->status.rates[0].idx;
+ ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
+ retries = &zd_retry_rates[first_idx];
+ if (retry <= 0 || retry > retries->count)
+ continue;
+
+ final_idx = retries->rate[retry - 1];
+ final_rate = zd_rates[final_idx].hw_value;
+
+ if (final_rate != tx_status->rate) {
+ continue;
+ }
+
+ found = 1;
+ break;
+ }
+
+ if (found) {
+ for (i=1; i<=position; i++) {
+ skb = __skb_dequeue(q);
+ zd_mac_tx_status(hw, skb,
+ mac->ack_pending ? mac->ack_signal : 0,
+ i == position ? tx_status : NULL);
+ mac->ack_pending = 0;
+ }
+ }
+
+ spin_unlock_irqrestore(&q->lock, flags);
+}
+
+/**
+ * zd_mac_tx_to_dev - callback for USB layer
+ * @skb: a &sk_buff pointer
+ * @error: error value, 0 if transmission successful
+ *
+ * Informs the MAC layer that the frame has successfully transferred to the
+ * device. If an ACK is required and the transfer to the device has been
+ * successful, the packets are put on the @ack_wait_queue with
+ * the control set removed.
+ */
+void zd_mac_tx_to_dev(struct sk_buff *skb, int error)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hw *hw = info->rate_driver_data[0];
+ struct zd_mac *mac = zd_hw_mac(hw);
+
+ ieee80211_tx_info_clear_status(info);
+
+ skb_pull(skb, sizeof(struct zd_ctrlset));
+ if (unlikely(error ||
+ (info->flags & IEEE80211_TX_CTL_NO_ACK))) {
+ /*
+ * FIXME : do we need to fill in anything ?
+ */
+ ieee80211_tx_status_irqsafe(hw, skb);
+ } else {
+ struct sk_buff_head *q = &mac->ack_wait_queue;
+
+ skb_queue_tail(q, skb);
+ while (skb_queue_len(q) > ZD_MAC_MAX_ACK_WAITERS) {
+ zd_mac_tx_status(hw, skb_dequeue(q),
+ mac->ack_pending ? mac->ack_signal : 0,
+ NULL);
+ mac->ack_pending = 0;
+ }
+ }
+}
+
+static int zd_calc_tx_length_us(u8 *service, u8 zd_rate, u16 tx_length)
+{
+ /* ZD_PURE_RATE() must be used to remove the modulation type flag of
+ * the zd-rate values.
+ */
+ static const u8 rate_divisor[] = {
+ [ZD_PURE_RATE(ZD_CCK_RATE_1M)] = 1,
+ [ZD_PURE_RATE(ZD_CCK_RATE_2M)] = 2,
+ /* Bits must be doubled. */
+ [ZD_PURE_RATE(ZD_CCK_RATE_5_5M)] = 11,
+ [ZD_PURE_RATE(ZD_CCK_RATE_11M)] = 11,
+ [ZD_PURE_RATE(ZD_OFDM_RATE_6M)] = 6,
+ [ZD_PURE_RATE(ZD_OFDM_RATE_9M)] = 9,
+ [ZD_PURE_RATE(ZD_OFDM_RATE_12M)] = 12,
+ [ZD_PURE_RATE(ZD_OFDM_RATE_18M)] = 18,
+ [ZD_PURE_RATE(ZD_OFDM_RATE_24M)] = 24,
+ [ZD_PURE_RATE(ZD_OFDM_RATE_36M)] = 36,
+ [ZD_PURE_RATE(ZD_OFDM_RATE_48M)] = 48,
+ [ZD_PURE_RATE(ZD_OFDM_RATE_54M)] = 54,
+ };
+
+ u32 bits = (u32)tx_length * 8;
+ u32 divisor;
+
+ divisor = rate_divisor[ZD_PURE_RATE(zd_rate)];
+ if (divisor == 0)
+ return -EINVAL;
+
+ switch (zd_rate) {
+ case ZD_CCK_RATE_5_5M:
+ bits = (2*bits) + 10; /* round up to the next integer */
+ break;
+ case ZD_CCK_RATE_11M:
+ if (service) {
+ u32 t = bits % 11;
+ *service &= ~ZD_PLCP_SERVICE_LENGTH_EXTENSION;
+ if (0 < t && t <= 3) {
+ *service |= ZD_PLCP_SERVICE_LENGTH_EXTENSION;
+ }
+ }
+ bits += 10; /* round up to the next integer */
+ break;
+ }
+
+ return bits/divisor;
+}
+
+static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs,
+ struct ieee80211_hdr *header,
+ struct ieee80211_tx_info *info)
+{
+ /*
+ * CONTROL TODO:
+ * - if backoff needed, enable bit 0
+ * - if burst (backoff not needed) disable bit 0
+ */
+
+ cs->control = 0;
+
+ /* First fragment */
+ if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ cs->control |= ZD_CS_NEED_RANDOM_BACKOFF;
+
+ /* No ACK expected (multicast, etc.) */
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ cs->control |= ZD_CS_NO_ACK;
+
+ /* PS-POLL */
+ if (ieee80211_is_pspoll(header->frame_control))
+ cs->control |= ZD_CS_PS_POLL_FRAME;
+
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
+ cs->control |= ZD_CS_RTS;
+
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
+ cs->control |= ZD_CS_SELF_CTS;
+
+ /* FIXME: Management frame? */
+}
+
+static bool zd_mac_match_cur_beacon(struct zd_mac *mac, struct sk_buff *beacon)
+{
+ if (!mac->beacon.cur_beacon)
+ return false;
+
+ if (mac->beacon.cur_beacon->len != beacon->len)
+ return false;
+
+ return !memcmp(beacon->data, mac->beacon.cur_beacon->data, beacon->len);
+}
+
+static void zd_mac_free_cur_beacon_locked(struct zd_mac *mac)
+{
+ ZD_ASSERT(mutex_is_locked(&mac->chip.mutex));
+
+ kfree_skb(mac->beacon.cur_beacon);
+ mac->beacon.cur_beacon = NULL;
+}
+
+static void zd_mac_free_cur_beacon(struct zd_mac *mac)
+{
+ mutex_lock(&mac->chip.mutex);
+ zd_mac_free_cur_beacon_locked(mac);
+ mutex_unlock(&mac->chip.mutex);
+}
+
+static int zd_mac_config_beacon(struct ieee80211_hw *hw, struct sk_buff *beacon,
+ bool in_intr)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+ int r, ret, num_cmds, req_pos = 0;
+ u32 tmp, j = 0;
+ /* 4 more bytes for tail CRC */
+ u32 full_len = beacon->len + 4;
+ unsigned long end_jiffies, message_jiffies;
+ struct zd_ioreq32 *ioreqs;
+
+ mutex_lock(&mac->chip.mutex);
+
+ /* Check if hw already has this beacon. */
+ if (zd_mac_match_cur_beacon(mac, beacon)) {
+ r = 0;
+ goto out_nofree;
+ }
+
+ /* Alloc memory for full beacon write at once. */
+ num_cmds = 1 + zd_chip_is_zd1211b(&mac->chip) + full_len;
+ ioreqs = kmalloc(num_cmds * sizeof(struct zd_ioreq32), GFP_KERNEL);
+ if (!ioreqs) {
+ r = -ENOMEM;
+ goto out_nofree;
+ }
+
+ r = zd_iowrite32_locked(&mac->chip, 0, CR_BCN_FIFO_SEMAPHORE);
+ if (r < 0)
+ goto out;
+ r = zd_ioread32_locked(&mac->chip, &tmp, CR_BCN_FIFO_SEMAPHORE);
+ if (r < 0)
+ goto release_sema;
+ if (in_intr && tmp & 0x2) {
+ r = -EBUSY;
+ goto release_sema;
+ }
+
+ end_jiffies = jiffies + HZ / 2; /*~500ms*/
+ message_jiffies = jiffies + HZ / 10; /*~100ms*/
+ while (tmp & 0x2) {
+ r = zd_ioread32_locked(&mac->chip, &tmp, CR_BCN_FIFO_SEMAPHORE);
+ if (r < 0)
+ goto release_sema;
+ if (time_is_before_eq_jiffies(message_jiffies)) {
+ message_jiffies = jiffies + HZ / 10;
+ dev_err(zd_mac_dev(mac),
+ "CR_BCN_FIFO_SEMAPHORE not ready\n");
+ if (time_is_before_eq_jiffies(end_jiffies)) {
+ dev_err(zd_mac_dev(mac),
+ "Giving up beacon config.\n");
+ r = -ETIMEDOUT;
+ goto reset_device;
+ }
+ }
+ msleep(20);
+ }
+
+ ioreqs[req_pos].addr = CR_BCN_FIFO;
+ ioreqs[req_pos].value = full_len - 1;
+ req_pos++;
+ if (zd_chip_is_zd1211b(&mac->chip)) {
+ ioreqs[req_pos].addr = CR_BCN_LENGTH;
+ ioreqs[req_pos].value = full_len - 1;
+ req_pos++;
+ }
+
+ for (j = 0 ; j < beacon->len; j++) {
+ ioreqs[req_pos].addr = CR_BCN_FIFO;
+ ioreqs[req_pos].value = *((u8 *)(beacon->data + j));
+ req_pos++;
+ }
+
+ for (j = 0; j < 4; j++) {
+ ioreqs[req_pos].addr = CR_BCN_FIFO;
+ ioreqs[req_pos].value = 0x0;
+ req_pos++;
+ }
+
+ BUG_ON(req_pos != num_cmds);
+
+ r = zd_iowrite32a_locked(&mac->chip, ioreqs, num_cmds);
+
+release_sema:
+ /*
+ * Try very hard to release device beacon semaphore, as otherwise
+ * device/driver can be left in unusable state.
+ */
+ end_jiffies = jiffies + HZ / 2; /*~500ms*/
+ ret = zd_iowrite32_locked(&mac->chip, 1, CR_BCN_FIFO_SEMAPHORE);
+ while (ret < 0) {
+ if (in_intr || time_is_before_eq_jiffies(end_jiffies)) {
+ ret = -ETIMEDOUT;
+ break;
+ }
+
+ msleep(20);
+ ret = zd_iowrite32_locked(&mac->chip, 1, CR_BCN_FIFO_SEMAPHORE);
+ }
+
+ if (ret < 0)
+ dev_err(zd_mac_dev(mac), "Could not release "
+ "CR_BCN_FIFO_SEMAPHORE!\n");
+ if (r < 0 || ret < 0) {
+ if (r >= 0)
+ r = ret;
+
+ /* We don't know if beacon was written successfully or not,
+ * so clear current. */
+ zd_mac_free_cur_beacon_locked(mac);
+
+ goto out;
+ }
+
+ /* Beacon has now been written successfully, update current. */
+ zd_mac_free_cur_beacon_locked(mac);
+ mac->beacon.cur_beacon = beacon;
+ beacon = NULL;
+
+ /* 802.11b/g 2.4G CCK 1Mb
+ * 802.11a, not yet implemented, uses different values (see GPL vendor
+ * driver)
+ */
+ r = zd_iowrite32_locked(&mac->chip, 0x00000400 | (full_len << 19),
+ CR_BCN_PLCP_CFG);
+out:
+ kfree(ioreqs);
+out_nofree:
+ kfree_skb(beacon);
+ mutex_unlock(&mac->chip.mutex);
+
+ return r;
+
+reset_device:
+ zd_mac_free_cur_beacon_locked(mac);
+ kfree_skb(beacon);
+
+ mutex_unlock(&mac->chip.mutex);
+ kfree(ioreqs);
+
+ /* semaphore stuck, reset device to avoid fw freeze later */
+ dev_warn(zd_mac_dev(mac), "CR_BCN_FIFO_SEMAPHORE stuck, "
+ "resetting device...");
+ usb_queue_reset_device(mac->chip.usb.intf);
+
+ return r;
+}
+
+static int fill_ctrlset(struct zd_mac *mac,
+ struct sk_buff *skb)
+{
+ int r;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ unsigned int frag_len = skb->len + FCS_LEN;
+ unsigned int packet_length;
+ struct ieee80211_rate *txrate;
+ struct zd_ctrlset *cs = (struct zd_ctrlset *)
+ skb_push(skb, sizeof(struct zd_ctrlset));
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+ ZD_ASSERT(frag_len <= 0xffff);
+
+ /*
+ * Firmware computes the duration itself (for all frames except PSPoll)
+ * and needs the field set to 0 at input, otherwise firmware messes up
+ * duration_id and sets bits 14 and 15 on.
+ */
+ if (!ieee80211_is_pspoll(hdr->frame_control))
+ hdr->duration_id = 0;
+
+ txrate = ieee80211_get_tx_rate(mac->hw, info);
+
+ cs->modulation = txrate->hw_value;
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+ cs->modulation = txrate->hw_value_short;
+
+ cs->tx_length = cpu_to_le16(frag_len);
+
+ cs_set_control(mac, cs, hdr, info);
+
+ packet_length = frag_len + sizeof(struct zd_ctrlset) + 10;
+ ZD_ASSERT(packet_length <= 0xffff);
+ /* ZD1211B: Computing the length difference this way, gives us
+ * flexibility to compute the packet length.
+ */
+ cs->packet_length = cpu_to_le16(zd_chip_is_zd1211b(&mac->chip) ?
+ packet_length - frag_len : packet_length);
+
+ /*
+ * CURRENT LENGTH:
+ * - transmit frame length in microseconds
+ * - seems to be derived from frame length
+ * - see Cal_Us_Service() in zdinlinef.h
+ * - if macp->bTxBurstEnable is enabled, then multiply by 4
+ * - bTxBurstEnable is never set in the vendor driver
+ *
+ * SERVICE:
+ * - "for PLCP configuration"
+ * - always 0 except in some situations at 802.11b 11M
+ * - see line 53 of zdinlinef.h
+ */
+ cs->service = 0;
+ r = zd_calc_tx_length_us(&cs->service, ZD_RATE(cs->modulation),
+ le16_to_cpu(cs->tx_length));
+ if (r < 0)
+ return r;
+ cs->current_length = cpu_to_le16(r);
+ cs->next_frame_length = 0;
+
+ return 0;
+}
+
+/**
+ * zd_op_tx - transmits a network frame to the device
+ *
+ * @dev: mac80211 hardware device
+ * @skb: socket buffer
+ * @control: the control structure
+ *
+ * This function transmit an IEEE 802.11 network frame to the device. The
+ * control block of the skbuff will be initialized. If necessary the incoming
+ * mac80211 queues will be stopped.
+ */
+static void zd_op_tx(struct ieee80211_hw *hw,
+ struct ieee80211_tx_control *control,
+ struct sk_buff *skb)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ int r;
+
+ r = fill_ctrlset(mac, skb);
+ if (r)
+ goto fail;
+
+ info->rate_driver_data[0] = hw;
+
+ r = zd_usb_tx(&mac->chip.usb, skb);
+ if (r)
+ goto fail;
+ return;
+
+fail:
+ dev_kfree_skb(skb);
+}
+
+/**
+ * filter_ack - filters incoming packets for acknowledgements
+ * @dev: the mac80211 device
+ * @rx_hdr: received header
+ * @stats: the status for the received packet
+ *
+ * This functions looks for ACK packets and tries to match them with the
+ * frames in the tx queue. If a match is found the frame will be dequeued and
+ * the upper layers is informed about the successful transmission. If
+ * mac80211 queues have been stopped and the number of frames still to be
+ * transmitted is low the queues will be opened again.
+ *
+ * Returns 1 if the frame was an ACK, 0 if it was ignored.
+ */
+static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr,
+ struct ieee80211_rx_status *stats)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+ struct sk_buff *skb;
+ struct sk_buff_head *q;
+ unsigned long flags;
+ int found = 0;
+ int i, position = 0;
+
+ if (!ieee80211_is_ack(rx_hdr->frame_control))
+ return 0;
+
+ q = &mac->ack_wait_queue;
+ spin_lock_irqsave(&q->lock, flags);
+ skb_queue_walk(q, skb) {
+ struct ieee80211_hdr *tx_hdr;
+
+ position ++;
+
+ if (mac->ack_pending && skb_queue_is_first(q, skb))
+ continue;
+
+ tx_hdr = (struct ieee80211_hdr *)skb->data;
+ if (likely(ether_addr_equal(tx_hdr->addr2, rx_hdr->addr1)))
+ {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ for (i=1; i<position; i++) {
+ skb = __skb_dequeue(q);
+ zd_mac_tx_status(hw, skb,
+ mac->ack_pending ? mac->ack_signal : 0,
+ NULL);
+ mac->ack_pending = 0;
+ }
+
+ mac->ack_pending = 1;
+ mac->ack_signal = stats->signal;
+
+ /* Prevent pending tx-packet on AP-mode */
+ if (mac->type == NL80211_IFTYPE_AP) {
+ skb = __skb_dequeue(q);
+ zd_mac_tx_status(hw, skb, mac->ack_signal, NULL);
+ mac->ack_pending = 0;
+ }
+ }
+
+ spin_unlock_irqrestore(&q->lock, flags);
+ return 1;
+}
+
+int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+ struct ieee80211_rx_status stats;
+ const struct rx_status *status;
+ struct sk_buff *skb;
+ int bad_frame = 0;
+ __le16 fc;
+ int need_padding;
+ int i;
+ u8 rate;
+
+ if (length < ZD_PLCP_HEADER_SIZE + 10 /* IEEE80211_1ADDR_LEN */ +
+ FCS_LEN + sizeof(struct rx_status))
+ return -EINVAL;
+
+ memset(&stats, 0, sizeof(stats));
+
+ /* Note about pass_failed_fcs and pass_ctrl access below:
+ * mac locking intentionally omitted here, as this is the only unlocked
+ * reader and the only writer is configure_filter. Plus, if there were
+ * any races accessing these variables, it wouldn't really matter.
+ * If mac80211 ever provides a way for us to access filter flags
+ * from outside configure_filter, we could improve on this. Also, this
+ * situation may change once we implement some kind of DMA-into-skb
+ * RX path. */
+
+ /* Caller has to ensure that length >= sizeof(struct rx_status). */
+ status = (struct rx_status *)
+ (buffer + (length - sizeof(struct rx_status)));
+ if (status->frame_status & ZD_RX_ERROR) {
+ if (mac->pass_failed_fcs &&
+ (status->frame_status & ZD_RX_CRC32_ERROR)) {
+ stats.flag |= RX_FLAG_FAILED_FCS_CRC;
+ bad_frame = 1;
+ } else {
+ return -EINVAL;
+ }
+ }
+
+ stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) - 1].center_freq;
+ stats.band = NL80211_BAND_2GHZ;
+ stats.signal = zd_check_signal(hw, status->signal_strength);
+
+ rate = zd_rx_rate(buffer, status);
+
+ /* todo: return index in the big switches in zd_rx_rate instead */
+ for (i = 0; i < mac->band.n_bitrates; i++)
+ if (rate == mac->band.bitrates[i].hw_value)
+ stats.rate_idx = i;
+
+ length -= ZD_PLCP_HEADER_SIZE + sizeof(struct rx_status);
+ buffer += ZD_PLCP_HEADER_SIZE;
+
+ /* Except for bad frames, filter each frame to see if it is an ACK, in
+ * which case our internal TX tracking is updated. Normally we then
+ * bail here as there's no need to pass ACKs on up to the stack, but
+ * there is also the case where the stack has requested us to pass
+ * control frames on up (pass_ctrl) which we must consider. */
+ if (!bad_frame &&
+ filter_ack(hw, (struct ieee80211_hdr *)buffer, &stats)
+ && !mac->pass_ctrl)
+ return 0;
+
+ fc = get_unaligned((__le16*)buffer);
+ need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc);
+
+ skb = dev_alloc_skb(length + (need_padding ? 2 : 0));
+ if (skb == NULL)
+ return -ENOMEM;
+ if (need_padding) {
+ /* Make sure the payload data is 4 byte aligned. */
+ skb_reserve(skb, 2);
+ }
+
+ /* FIXME : could we avoid this big memcpy ? */
+ memcpy(skb_put(skb, length), buffer, length);
+
+ memcpy(IEEE80211_SKB_RXCB(skb), &stats, sizeof(stats));
+ ieee80211_rx_irqsafe(hw, skb);
+ return 0;
+}
+
+static int zd_op_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+
+ /* using NL80211_IFTYPE_UNSPECIFIED to indicate no mode selected */
+ if (mac->type != NL80211_IFTYPE_UNSPECIFIED)
+ return -EOPNOTSUPP;
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_MONITOR:
+ case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_AP:
+ mac->type = vif->type;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ mac->vif = vif;
+
+ return set_mac_and_bssid(mac);
+}
+
+static void zd_op_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+ mac->type = NL80211_IFTYPE_UNSPECIFIED;
+ mac->vif = NULL;
+ zd_set_beacon_interval(&mac->chip, 0, 0, NL80211_IFTYPE_UNSPECIFIED);
+ zd_write_mac_addr(&mac->chip, NULL);
+
+ zd_mac_free_cur_beacon(mac);
+}
+
+static int zd_op_config(struct ieee80211_hw *hw, u32 changed)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+ struct ieee80211_conf *conf = &hw->conf;
+
+ spin_lock_irq(&mac->lock);
+ mac->channel = conf->chandef.chan->hw_value;
+ spin_unlock_irq(&mac->lock);
+
+ return zd_chip_set_channel(&mac->chip, conf->chandef.chan->hw_value);
+}
+
+static void zd_beacon_done(struct zd_mac *mac)
+{
+ struct sk_buff *skb, *beacon;
+
+ if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags))
+ return;
+ if (!mac->vif || mac->vif->type != NL80211_IFTYPE_AP)
+ return;
+
+ /*
+ * Send out buffered broad- and multicast frames.
+ */
+ while (!ieee80211_queue_stopped(mac->hw, 0)) {
+ skb = ieee80211_get_buffered_bc(mac->hw, mac->vif);
+ if (!skb)
+ break;
+ zd_op_tx(mac->hw, NULL, skb);
+ }
+
+ /*
+ * Fetch next beacon so that tim_count is updated.
+ */
+ beacon = ieee80211_beacon_get(mac->hw, mac->vif);
+ if (beacon)
+ zd_mac_config_beacon(mac->hw, beacon, true);
+
+ spin_lock_irq(&mac->lock);
+ mac->beacon.last_update = jiffies;
+ spin_unlock_irq(&mac->lock);
+}
+
+static void zd_process_intr(struct work_struct *work)
+{
+ u16 int_status;
+ unsigned long flags;
+ struct zd_mac *mac = container_of(work, struct zd_mac, process_intr);
+
+ spin_lock_irqsave(&mac->lock, flags);
+ int_status = le16_to_cpu(*(__le16 *)(mac->intr_buffer + 4));
+ spin_unlock_irqrestore(&mac->lock, flags);
+
+ if (int_status & INT_CFG_NEXT_BCN) {
+ /*dev_dbg_f_limit(zd_mac_dev(mac), "INT_CFG_NEXT_BCN\n");*/
+ zd_beacon_done(mac);
+ } else {
+ dev_dbg_f(zd_mac_dev(mac), "Unsupported interrupt\n");
+ }
+
+ zd_chip_enable_hwint(&mac->chip);
+}
+
+
+static u64 zd_op_prepare_multicast(struct ieee80211_hw *hw,
+ struct netdev_hw_addr_list *mc_list)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+ struct zd_mc_hash hash;
+ struct netdev_hw_addr *ha;
+
+ zd_mc_clear(&hash);
+
+ netdev_hw_addr_list_for_each(ha, mc_list) {
+ dev_dbg_f(zd_mac_dev(mac), "mc addr %pM\n", ha->addr);
+ zd_mc_add_addr(&hash, ha->addr);
+ }
+
+ return hash.low | ((u64)hash.high << 32);
+}
+
+#define SUPPORTED_FIF_FLAGS \
+ (FIF_ALLMULTI | FIF_FCSFAIL | FIF_CONTROL | \
+ FIF_OTHER_BSS | FIF_BCN_PRBRESP_PROMISC)
+static void zd_op_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *new_flags,
+ u64 multicast)
+{
+ struct zd_mc_hash hash = {
+ .low = multicast,
+ .high = multicast >> 32,
+ };
+ struct zd_mac *mac = zd_hw_mac(hw);
+ unsigned long flags;
+ int r;
+
+ /* Only deal with supported flags */
+ changed_flags &= SUPPORTED_FIF_FLAGS;
+ *new_flags &= SUPPORTED_FIF_FLAGS;
+
+ /*
+ * If multicast parameter (as returned by zd_op_prepare_multicast)
+ * has changed, no bit in changed_flags is set. To handle this
+ * situation, we do not return if changed_flags is 0. If we do so,
+ * we will have some issue with IPv6 which uses multicast for link
+ * layer address resolution.
+ */
+ if (*new_flags & FIF_ALLMULTI)
+ zd_mc_add_all(&hash);
+
+ spin_lock_irqsave(&mac->lock, flags);
+ mac->pass_failed_fcs = !!(*new_flags & FIF_FCSFAIL);
+ mac->pass_ctrl = !!(*new_flags & FIF_CONTROL);
+ mac->multicast_hash = hash;
+ spin_unlock_irqrestore(&mac->lock, flags);
+
+ zd_chip_set_multicast_hash(&mac->chip, &hash);
+
+ if (changed_flags & FIF_CONTROL) {
+ r = set_rx_filter(mac);
+ if (r)
+ dev_err(zd_mac_dev(mac), "set_rx_filter error %d\n", r);
+ }
+
+ /* no handling required for FIF_OTHER_BSS as we don't currently
+ * do BSSID filtering */
+ /* FIXME: in future it would be nice to enable the probe response
+ * filter (so that the driver doesn't see them) until
+ * FIF_BCN_PRBRESP_PROMISC is set. however due to atomicity here, we'd
+ * have to schedule work to enable prbresp reception, which might
+ * happen too late. For now we'll just listen and forward them all the
+ * time. */
+}
+
+static void set_rts_cts(struct zd_mac *mac, unsigned int short_preamble)
+{
+ mutex_lock(&mac->chip.mutex);
+ zd_chip_set_rts_cts_rate_locked(&mac->chip, short_preamble);
+ mutex_unlock(&mac->chip.mutex);
+}
+
+static void zd_op_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changes)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+ int associated;
+
+ dev_dbg_f(zd_mac_dev(mac), "changes: %x\n", changes);
+
+ if (mac->type == NL80211_IFTYPE_MESH_POINT ||
+ mac->type == NL80211_IFTYPE_ADHOC ||
+ mac->type == NL80211_IFTYPE_AP) {
+ associated = true;
+ if (changes & BSS_CHANGED_BEACON) {
+ struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+
+ if (beacon) {
+ zd_chip_disable_hwint(&mac->chip);
+ zd_mac_config_beacon(hw, beacon, false);
+ zd_chip_enable_hwint(&mac->chip);
+ }
+ }
+
+ if (changes & BSS_CHANGED_BEACON_ENABLED) {
+ u16 interval = 0;
+ u8 period = 0;
+
+ if (bss_conf->enable_beacon) {
+ period = bss_conf->dtim_period;
+ interval = bss_conf->beacon_int;
+ }
+
+ spin_lock_irq(&mac->lock);
+ mac->beacon.period = period;
+ mac->beacon.interval = interval;
+ mac->beacon.last_update = jiffies;
+ spin_unlock_irq(&mac->lock);
+
+ zd_set_beacon_interval(&mac->chip, interval, period,
+ mac->type);
+ }
+ } else
+ associated = is_valid_ether_addr(bss_conf->bssid);
+
+ spin_lock_irq(&mac->lock);
+ mac->associated = associated;
+ spin_unlock_irq(&mac->lock);
+
+ /* TODO: do hardware bssid filtering */
+
+ if (changes & BSS_CHANGED_ERP_PREAMBLE) {
+ spin_lock_irq(&mac->lock);
+ mac->short_preamble = bss_conf->use_short_preamble;
+ spin_unlock_irq(&mac->lock);
+
+ set_rts_cts(mac, bss_conf->use_short_preamble);
+ }
+}
+
+static u64 zd_op_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+ return zd_chip_get_tsf(&mac->chip);
+}
+
+static const struct ieee80211_ops zd_ops = {
+ .tx = zd_op_tx,
+ .start = zd_op_start,
+ .stop = zd_op_stop,
+ .add_interface = zd_op_add_interface,
+ .remove_interface = zd_op_remove_interface,
+ .config = zd_op_config,
+ .prepare_multicast = zd_op_prepare_multicast,
+ .configure_filter = zd_op_configure_filter,
+ .bss_info_changed = zd_op_bss_info_changed,
+ .get_tsf = zd_op_get_tsf,
+};
+
+struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
+{
+ struct zd_mac *mac;
+ struct ieee80211_hw *hw;
+
+ hw = ieee80211_alloc_hw(sizeof(struct zd_mac), &zd_ops);
+ if (!hw) {
+ dev_dbg_f(&intf->dev, "out of memory\n");
+ return NULL;
+ }
+
+ mac = zd_hw_mac(hw);
+
+ memset(mac, 0, sizeof(*mac));
+ spin_lock_init(&mac->lock);
+ mac->hw = hw;
+
+ mac->type = NL80211_IFTYPE_UNSPECIFIED;
+
+ memcpy(mac->channels, zd_channels, sizeof(zd_channels));
+ memcpy(mac->rates, zd_rates, sizeof(zd_rates));
+ mac->band.n_bitrates = ARRAY_SIZE(zd_rates);
+ mac->band.bitrates = mac->rates;
+ mac->band.n_channels = ARRAY_SIZE(zd_channels);
+ mac->band.channels = mac->channels;
+
+ hw->wiphy->bands[NL80211_BAND_2GHZ] = &mac->band;
+
+ ieee80211_hw_set(hw, MFP_CAPABLE);
+ ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING);
+ ieee80211_hw_set(hw, RX_INCLUDES_FCS);
+ ieee80211_hw_set(hw, SIGNAL_UNSPEC);
+
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_AP);
+
+ hw->max_signal = 100;
+ hw->queues = 1;
+ hw->extra_tx_headroom = sizeof(struct zd_ctrlset);
+
+ /*
+ * Tell mac80211 that we support multi rate retries
+ */
+ hw->max_rates = IEEE80211_TX_MAX_RATES;
+ hw->max_rate_tries = 18; /* 9 rates * 2 retries/rate */
+
+ skb_queue_head_init(&mac->ack_wait_queue);
+ mac->ack_pending = 0;
+
+ zd_chip_init(&mac->chip, hw, intf);
+ housekeeping_init(mac);
+ beacon_init(mac);
+ INIT_WORK(&mac->process_intr, zd_process_intr);
+
+ SET_IEEE80211_DEV(hw, &intf->dev);
+ return hw;
+}
+
+#define BEACON_WATCHDOG_DELAY round_jiffies_relative(HZ)
+
+static void beacon_watchdog_handler(struct work_struct *work)
+{
+ struct zd_mac *mac =
+ container_of(work, struct zd_mac, beacon.watchdog_work.work);
+ struct sk_buff *beacon;
+ unsigned long timeout;
+ int interval, period;
+
+ if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags))
+ goto rearm;
+ if (mac->type != NL80211_IFTYPE_AP || !mac->vif)
+ goto rearm;
+
+ spin_lock_irq(&mac->lock);
+ interval = mac->beacon.interval;
+ period = mac->beacon.period;
+ timeout = mac->beacon.last_update +
+ msecs_to_jiffies(interval * 1024 / 1000) * 3;
+ spin_unlock_irq(&mac->lock);
+
+ if (interval > 0 && time_is_before_jiffies(timeout)) {
+ dev_dbg_f(zd_mac_dev(mac), "beacon interrupt stalled, "
+ "restarting. "
+ "(interval: %d, dtim: %d)\n",
+ interval, period);
+
+ zd_chip_disable_hwint(&mac->chip);
+
+ beacon = ieee80211_beacon_get(mac->hw, mac->vif);
+ if (beacon) {
+ zd_mac_free_cur_beacon(mac);
+
+ zd_mac_config_beacon(mac->hw, beacon, false);
+ }
+
+ zd_set_beacon_interval(&mac->chip, interval, period, mac->type);
+
+ zd_chip_enable_hwint(&mac->chip);
+
+ spin_lock_irq(&mac->lock);
+ mac->beacon.last_update = jiffies;
+ spin_unlock_irq(&mac->lock);
+ }
+
+rearm:
+ queue_delayed_work(zd_workqueue, &mac->beacon.watchdog_work,
+ BEACON_WATCHDOG_DELAY);
+}
+
+static void beacon_init(struct zd_mac *mac)
+{
+ INIT_DELAYED_WORK(&mac->beacon.watchdog_work, beacon_watchdog_handler);
+}
+
+static void beacon_enable(struct zd_mac *mac)
+{
+ dev_dbg_f(zd_mac_dev(mac), "\n");
+
+ mac->beacon.last_update = jiffies;
+ queue_delayed_work(zd_workqueue, &mac->beacon.watchdog_work,
+ BEACON_WATCHDOG_DELAY);
+}
+
+static void beacon_disable(struct zd_mac *mac)
+{
+ dev_dbg_f(zd_mac_dev(mac), "\n");
+ cancel_delayed_work_sync(&mac->beacon.watchdog_work);
+
+ zd_mac_free_cur_beacon(mac);
+}
+
+#define LINK_LED_WORK_DELAY HZ
+
+static void link_led_handler(struct work_struct *work)
+{
+ struct zd_mac *mac =
+ container_of(work, struct zd_mac, housekeeping.link_led_work.work);
+ struct zd_chip *chip = &mac->chip;
+ int is_associated;
+ int r;
+
+ if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags))
+ goto requeue;
+
+ spin_lock_irq(&mac->lock);
+ is_associated = mac->associated;
+ spin_unlock_irq(&mac->lock);
+
+ r = zd_chip_control_leds(chip,
+ is_associated ? ZD_LED_ASSOCIATED : ZD_LED_SCANNING);
+ if (r)
+ dev_dbg_f(zd_mac_dev(mac), "zd_chip_control_leds error %d\n", r);
+
+requeue:
+ queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work,
+ LINK_LED_WORK_DELAY);
+}
+
+static void housekeeping_init(struct zd_mac *mac)
+{
+ INIT_DELAYED_WORK(&mac->housekeeping.link_led_work, link_led_handler);
+}
+
+static void housekeeping_enable(struct zd_mac *mac)
+{
+ dev_dbg_f(zd_mac_dev(mac), "\n");
+ queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work,
+ 0);
+}
+
+static void housekeeping_disable(struct zd_mac *mac)
+{
+ dev_dbg_f(zd_mac_dev(mac), "\n");
+ cancel_delayed_work_sync(&mac->housekeeping.link_led_work);
+ zd_chip_control_leds(&mac->chip, ZD_LED_OFF);
+}