diff options
Diffstat (limited to 'drivers/nfc')
79 files changed, 27074 insertions, 0 deletions
diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig new file mode 100644 index 0000000..9a76549 --- /dev/null +++ b/drivers/nfc/Kconfig @@ -0,0 +1,80 @@ +# +# Near Field Communication (NFC) devices +# + +menu "Near Field Communication (NFC) devices" + depends on NFC + +config NFC_WILINK + depends on !KERNEL_4_8 + tristate "Texas Instruments NFC WiLink driver" + depends on m + depends on TI_ST && NFC_NCI + help + This enables the NFC driver for Texas Instrument's BT/FM/GPS/NFC + combo devices. This makes use of shared transport line discipline + core driver to communicate with the NFC core of the combo chip. + + Say Y here to compile support for Texas Instrument's NFC WiLink driver + into the kernel or say M to compile it as module. + +config NFC_TRF7970A + depends on !KERNEL_3_4 + tristate "Texas Instruments TRF7970a NFC driver" + depends on m + depends on SPI && NFC_DIGITAL + help + This option enables the NFC driver for Texas Instruments' TRF7970a + device. Such device supports 5 different protocols: ISO14443A, + ISO14443B, FeLiCa, ISO15693 and ISO18000-3. + + Say Y here to compile support for TRF7970a into the kernel or + say M to compile it as a module. The module will be called + trf7970a.ko. + +config NFC_MEI_PHY + depends on !KERNEL_4_10 + tristate "MEI bus NFC device support" + depends on m + depends on INTEL_MEI && NFC_HCI + help + This adds support to use an mei bus nfc device. Select this if you + will use an HCI NFC driver for an NFC chip connected behind an + Intel's Management Engine chip. + + If unsure, say N. + +config NFC_SIM + tristate "NFC hardware simulator driver" + depends on m + depends on NFC_DIGITAL + help + This driver declares two virtual NFC devices supporting NFC-DEP + protocol. An LLCP connection can be established between them and + all packets sent from one device is sent back to the other, acting as + loopback devices. + + If unsure, say N. + +config NFC_PORT100 + tristate "Sony NFC Port-100 Series USB device support" + depends on m + depends on USB + depends on NFC_DIGITAL + help + This adds support for Sony Port-100 chip based USB devices such as the + RC-S380 dongle. + + If unsure, say N. + +source "drivers/nfc/fdp/Kconfig" +source "drivers/nfc/pn544/Kconfig" +source "drivers/nfc/pn533/Kconfig" +source "drivers/nfc/microread/Kconfig" +source "drivers/nfc/nfcmrvl/Kconfig" +source "drivers/nfc/st21nfca/Kconfig" +source "drivers/nfc/st-nci/Kconfig" +source "drivers/nfc/nxp-nci/Kconfig" +source "drivers/nfc/s3fwrn5/Kconfig" +source "drivers/nfc/st95hf/Kconfig" +endmenu diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile new file mode 100644 index 0000000..2cb5df6 --- /dev/null +++ b/drivers/nfc/Makefile @@ -0,0 +1,19 @@ +# +# Makefile for nfc devices +# + +obj-$(CPTCFG_NFC_FDP) += fdp/ +obj-$(CPTCFG_NFC_PN544) += pn544/ +obj-$(CPTCFG_NFC_MICROREAD) += microread/ +obj-$(CPTCFG_NFC_PN533) += pn533/ +obj-$(CPTCFG_NFC_WILINK) += nfcwilink.o +obj-$(CPTCFG_NFC_MEI_PHY) += mei_phy.o +obj-$(CPTCFG_NFC_SIM) += nfcsim.o +obj-$(CPTCFG_NFC_PORT100) += port100.o +obj-$(CPTCFG_NFC_MRVL) += nfcmrvl/ +obj-$(CPTCFG_NFC_TRF7970A) += trf7970a.o +obj-$(CPTCFG_NFC_ST21NFCA) += st21nfca/ +obj-$(CPTCFG_NFC_ST_NCI) += st-nci/ +obj-$(CPTCFG_NFC_NXP_NCI) += nxp-nci/ +obj-$(CPTCFG_NFC_S3FWRN5) += s3fwrn5/ +obj-$(CPTCFG_NFC_ST95HF) += st95hf/ diff --git a/drivers/nfc/fdp/Kconfig b/drivers/nfc/fdp/Kconfig new file mode 100644 index 0000000..8ccc834 --- /dev/null +++ b/drivers/nfc/fdp/Kconfig @@ -0,0 +1,27 @@ +config NFC_FDP + depends on !KERNEL_3_13 + tristate "Intel FDP NFC driver" + depends on m + depends on NFC_NCI + depends on CRC_CCITT + default n + ---help--- + Intel Fields Peak NFC controller core driver. + This is a driver based on the NCI NFC kernel layers. + + To compile this driver as a module, choose m here. The module will + be called fdp. + Say N if unsure. + +config NFC_FDP_I2C + depends on !KERNEL_3_18 + tristate "NFC FDP i2c support" + depends on m + depends on NFC_FDP && I2C + ---help--- + This module adds support for the Intel Fields Peak NFC controller + i2c interface. + Select this if your platform is using the i2c bus. + + If you choose to build a module, it'll be called fdp_i2c. + Say N if unsure. diff --git a/drivers/nfc/fdp/Makefile b/drivers/nfc/fdp/Makefile new file mode 100644 index 0000000..295ab43 --- /dev/null +++ b/drivers/nfc/fdp/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for FDP NCI based NFC driver +# + +obj-$(CPTCFG_NFC_FDP) += fdp.o +obj-$(CPTCFG_NFC_FDP_I2C) += fdp_i2c.o + +fdp_i2c-objs = i2c.o + diff --git a/drivers/nfc/fdp/fdp.c b/drivers/nfc/fdp/fdp.c new file mode 100644 index 0000000..7c1eaea --- /dev/null +++ b/drivers/nfc/fdp/fdp.c @@ -0,0 +1,818 @@ +/* ------------------------------------------------------------------------- + * Copyright (C) 2014-2016, Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * ------------------------------------------------------------------------- + */ + +#include <linux/module.h> +#include <linux/nfc.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <net/nfc/nci_core.h> + +#include "fdp.h" + +#define FDP_OTP_PATCH_NAME "otp.bin" +#define FDP_RAM_PATCH_NAME "ram.bin" +#define FDP_FW_HEADER_SIZE 576 +#define FDP_FW_UPDATE_SLEEP 1000 + +#define NCI_GET_VERSION_TIMEOUT 8000 +#define NCI_PATCH_REQUEST_TIMEOUT 8000 +#define FDP_PATCH_CONN_DEST 0xC2 +#define FDP_PATCH_CONN_PARAM_TYPE 0xA0 + +#define NCI_PATCH_TYPE_RAM 0x00 +#define NCI_PATCH_TYPE_OTP 0x01 +#define NCI_PATCH_TYPE_EOT 0xFF + +#define NCI_PARAM_ID_FW_RAM_VERSION 0xA0 +#define NCI_PARAM_ID_FW_OTP_VERSION 0xA1 +#define NCI_PARAM_ID_OTP_LIMITED_VERSION 0xC5 +#define NCI_PARAM_ID_KEY_INDEX_ID 0xC6 + +#define NCI_GID_PROP 0x0F +#define NCI_OP_PROP_PATCH_OID 0x08 +#define NCI_OP_PROP_SET_PDATA_OID 0x23 + +struct fdp_nci_info { + struct nfc_phy_ops *phy_ops; + struct fdp_i2c_phy *phy; + struct nci_dev *ndev; + + const struct firmware *otp_patch; + const struct firmware *ram_patch; + u32 otp_patch_version; + u32 ram_patch_version; + + u32 otp_version; + u32 ram_version; + u32 limited_otp_version; + u8 key_index; + + u8 *fw_vsc_cfg; + u8 clock_type; + u32 clock_freq; + + atomic_t data_pkt_counter; + void (*data_pkt_counter_cb)(struct nci_dev *ndev); + u8 setup_patch_sent; + u8 setup_patch_ntf; + u8 setup_patch_status; + u8 setup_reset_ntf; + wait_queue_head_t setup_wq; +}; + +static u8 nci_core_get_config_otp_ram_version[5] = { + 0x04, + NCI_PARAM_ID_FW_RAM_VERSION, + NCI_PARAM_ID_FW_OTP_VERSION, + NCI_PARAM_ID_OTP_LIMITED_VERSION, + NCI_PARAM_ID_KEY_INDEX_ID +}; + +struct nci_core_get_config_rsp { + u8 status; + u8 count; + u8 data[0]; +}; + +static int fdp_nci_create_conn(struct nci_dev *ndev) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct core_conn_create_dest_spec_params param; + int r; + + /* proprietary destination specific paramerer without value */ + param.type = FDP_PATCH_CONN_PARAM_TYPE; + param.length = 0x00; + + r = nci_core_conn_create(info->ndev, FDP_PATCH_CONN_DEST, 1, + sizeof(param), ¶m); + if (r) + return r; + + return nci_get_conn_info_by_dest_type_params(ndev, + FDP_PATCH_CONN_DEST, NULL); +} + +static inline int fdp_nci_get_versions(struct nci_dev *ndev) +{ + return nci_core_cmd(ndev, NCI_OP_CORE_GET_CONFIG_CMD, + sizeof(nci_core_get_config_otp_ram_version), + (__u8 *) &nci_core_get_config_otp_ram_version); +} + +static inline int fdp_nci_patch_cmd(struct nci_dev *ndev, u8 type) +{ + return nci_prop_cmd(ndev, NCI_OP_PROP_PATCH_OID, sizeof(type), &type); +} + +static inline int fdp_nci_set_production_data(struct nci_dev *ndev, u8 len, + char *data) +{ + return nci_prop_cmd(ndev, NCI_OP_PROP_SET_PDATA_OID, len, data); +} + +static int fdp_nci_set_clock(struct nci_dev *ndev, u8 clock_type, + u32 clock_freq) +{ + u32 fc = 13560; + u32 nd, num, delta; + char data[9]; + + nd = (24 * fc) / clock_freq; + delta = 24 * fc - nd * clock_freq; + num = (32768 * delta) / clock_freq; + + data[0] = 0x00; + data[1] = 0x00; + data[2] = 0x00; + + data[3] = 0x10; + data[4] = 0x04; + data[5] = num & 0xFF; + data[6] = (num >> 8) & 0xff; + data[7] = nd; + data[8] = clock_type; + + return fdp_nci_set_production_data(ndev, 9, data); +} + +static void fdp_nci_send_patch_cb(struct nci_dev *ndev) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + + info->setup_patch_sent = 1; + wake_up(&info->setup_wq); +} + +/** + * Register a packet sent counter and a callback + * + * We have no other way of knowing when all firmware packets were sent out + * on the i2c bus. We need to know that in order to close the connection and + * send the patch end message. + */ +static void fdp_nci_set_data_pkt_counter(struct nci_dev *ndev, + void (*cb)(struct nci_dev *ndev), int count) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + + dev_dbg(dev, "NCI data pkt counter %d\n", count); + atomic_set(&info->data_pkt_counter, count); + info->data_pkt_counter_cb = cb; +} + +/** + * The device is expecting a stream of packets. All packets need to + * have the PBF flag set to 0x0 (last packet) even if the firmware + * file is segmented and there are multiple packets. If we give the + * whole firmware to nci_send_data it will segment it and it will set + * the PBF flag to 0x01 so we need to do the segmentation here. + * + * The firmware will be analyzed and applied when we send NCI_OP_PROP_PATCH_CMD + * command with NCI_PATCH_TYPE_EOT parameter. The device will send a + * NFCC_PATCH_NTF packaet and a NCI_OP_CORE_RESET_NTF packet. + */ +static int fdp_nci_send_patch(struct nci_dev *ndev, u8 conn_id, u8 type) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + const struct firmware *fw; + struct sk_buff *skb; + unsigned long len; + u8 max_size, payload_size; + int rc = 0; + + if ((type == NCI_PATCH_TYPE_OTP && !info->otp_patch) || + (type == NCI_PATCH_TYPE_RAM && !info->ram_patch)) + return -EINVAL; + + if (type == NCI_PATCH_TYPE_OTP) + fw = info->otp_patch; + else + fw = info->ram_patch; + + max_size = nci_conn_max_data_pkt_payload_size(ndev, conn_id); + if (max_size <= 0) + return -EINVAL; + + len = fw->size; + + fdp_nci_set_data_pkt_counter(ndev, fdp_nci_send_patch_cb, + DIV_ROUND_UP(fw->size, max_size)); + + while (len) { + + payload_size = min_t(unsigned long, (unsigned long) max_size, + len); + + skb = nci_skb_alloc(ndev, (NCI_CTRL_HDR_SIZE + payload_size), + GFP_KERNEL); + if (!skb) { + fdp_nci_set_data_pkt_counter(ndev, NULL, 0); + return -ENOMEM; + } + + + skb_reserve(skb, NCI_CTRL_HDR_SIZE); + + memcpy(skb_put(skb, payload_size), fw->data + (fw->size - len), + payload_size); + + rc = nci_send_data(ndev, conn_id, skb); + + if (rc) { + fdp_nci_set_data_pkt_counter(ndev, NULL, 0); + return rc; + } + + len -= payload_size; + } + + return rc; +} + +static int fdp_nci_open(struct nci_dev *ndev) +{ + int r; + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + + dev_dbg(dev, "%s\n", __func__); + + r = info->phy_ops->enable(info->phy); + + return r; +} + +static int fdp_nci_close(struct nci_dev *ndev) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + + dev_dbg(dev, "%s\n", __func__); + return 0; +} + +static int fdp_nci_send(struct nci_dev *ndev, struct sk_buff *skb) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + + dev_dbg(dev, "%s\n", __func__); + + if (atomic_dec_and_test(&info->data_pkt_counter)) + info->data_pkt_counter_cb(ndev); + + return info->phy_ops->write(info->phy, skb); +} + +int fdp_nci_recv_frame(struct nci_dev *ndev, struct sk_buff *skb) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + + dev_dbg(dev, "%s\n", __func__); + return nci_recv_frame(ndev, skb); +} +EXPORT_SYMBOL(fdp_nci_recv_frame); + +static int fdp_nci_request_firmware(struct nci_dev *ndev) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + u8 *data; + int r; + + r = request_firmware(&info->ram_patch, FDP_RAM_PATCH_NAME, dev); + if (r < 0) { + nfc_err(dev, "RAM patch request error\n"); + goto error; + } + + data = (u8 *) info->ram_patch->data; + info->ram_patch_version = + data[FDP_FW_HEADER_SIZE] | + (data[FDP_FW_HEADER_SIZE + 1] << 8) | + (data[FDP_FW_HEADER_SIZE + 2] << 16) | + (data[FDP_FW_HEADER_SIZE + 3] << 24); + + dev_dbg(dev, "RAM patch version: %d, size: %d\n", + info->ram_patch_version, (int) info->ram_patch->size); + + + r = request_firmware(&info->otp_patch, FDP_OTP_PATCH_NAME, dev); + if (r < 0) { + nfc_err(dev, "OTP patch request error\n"); + goto out; + } + + data = (u8 *) info->otp_patch->data; + info->otp_patch_version = + data[FDP_FW_HEADER_SIZE] | + (data[FDP_FW_HEADER_SIZE + 1] << 8) | + (data[FDP_FW_HEADER_SIZE+2] << 16) | + (data[FDP_FW_HEADER_SIZE+3] << 24); + + dev_dbg(dev, "OTP patch version: %d, size: %d\n", + info->otp_patch_version, (int) info->otp_patch->size); +out: + return 0; +error: + return r; +} + +static void fdp_nci_release_firmware(struct nci_dev *ndev) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + + if (info->otp_patch) { + release_firmware(info->otp_patch); + info->otp_patch = NULL; + } + + if (info->ram_patch) { + release_firmware(info->ram_patch); + info->ram_patch = NULL; + } +} + +static int fdp_nci_patch_otp(struct nci_dev *ndev) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + int conn_id; + int r = 0; + + if (info->otp_version >= info->otp_patch_version) + goto out; + + info->setup_patch_sent = 0; + info->setup_reset_ntf = 0; + info->setup_patch_ntf = 0; + + /* Patch init request */ + r = fdp_nci_patch_cmd(ndev, NCI_PATCH_TYPE_OTP); + if (r) + goto out; + + /* Patch data connection creation */ + conn_id = fdp_nci_create_conn(ndev); + if (conn_id < 0) { + r = conn_id; + goto out; + } + + /* Send the patch over the data connection */ + r = fdp_nci_send_patch(ndev, conn_id, NCI_PATCH_TYPE_OTP); + if (r) + goto out; + + /* Wait for all the packets to be send over i2c */ + wait_event_interruptible(info->setup_wq, + info->setup_patch_sent == 1); + + /* make sure that the NFCC processed the last data packet */ + msleep(FDP_FW_UPDATE_SLEEP); + + /* Close the data connection */ + r = nci_core_conn_close(info->ndev, conn_id); + if (r) + goto out; + + /* Patch finish message */ + if (fdp_nci_patch_cmd(ndev, NCI_PATCH_TYPE_EOT)) { + nfc_err(dev, "OTP patch error 0x%x\n", r); + r = -EINVAL; + goto out; + } + + /* If the patch notification didn't arrive yet, wait for it */ + wait_event_interruptible(info->setup_wq, info->setup_patch_ntf); + + /* Check if the patching was successful */ + r = info->setup_patch_status; + if (r) { + nfc_err(dev, "OTP patch error 0x%x\n", r); + r = -EINVAL; + goto out; + } + + /* + * We need to wait for the reset notification before we + * can continue + */ + wait_event_interruptible(info->setup_wq, info->setup_reset_ntf); + +out: + return r; +} + +static int fdp_nci_patch_ram(struct nci_dev *ndev) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + int conn_id; + int r = 0; + + if (info->ram_version >= info->ram_patch_version) + goto out; + + info->setup_patch_sent = 0; + info->setup_reset_ntf = 0; + info->setup_patch_ntf = 0; + + /* Patch init request */ + r = fdp_nci_patch_cmd(ndev, NCI_PATCH_TYPE_RAM); + if (r) + goto out; + + /* Patch data connection creation */ + conn_id = fdp_nci_create_conn(ndev); + if (conn_id < 0) { + r = conn_id; + goto out; + } + + /* Send the patch over the data connection */ + r = fdp_nci_send_patch(ndev, conn_id, NCI_PATCH_TYPE_RAM); + if (r) + goto out; + + /* Wait for all the packets to be send over i2c */ + wait_event_interruptible(info->setup_wq, + info->setup_patch_sent == 1); + + /* make sure that the NFCC processed the last data packet */ + msleep(FDP_FW_UPDATE_SLEEP); + + /* Close the data connection */ + r = nci_core_conn_close(info->ndev, conn_id); + if (r) + goto out; + + /* Patch finish message */ + if (fdp_nci_patch_cmd(ndev, NCI_PATCH_TYPE_EOT)) { + nfc_err(dev, "RAM patch error 0x%x\n", r); + r = -EINVAL; + goto out; + } + + /* If the patch notification didn't arrive yet, wait for it */ + wait_event_interruptible(info->setup_wq, info->setup_patch_ntf); + + /* Check if the patching was successful */ + r = info->setup_patch_status; + if (r) { + nfc_err(dev, "RAM patch error 0x%x\n", r); + r = -EINVAL; + goto out; + } + + /* + * We need to wait for the reset notification before we + * can continue + */ + wait_event_interruptible(info->setup_wq, info->setup_reset_ntf); + +out: + return r; +} + +static int fdp_nci_setup(struct nci_dev *ndev) +{ + /* Format: total length followed by an NCI packet */ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + int r; + u8 patched = 0; + + dev_dbg(dev, "%s\n", __func__); + + r = nci_core_init(ndev); + if (r) + goto error; + + /* Get RAM and OTP version */ + r = fdp_nci_get_versions(ndev); + if (r) + goto error; + + /* Load firmware from disk */ + r = fdp_nci_request_firmware(ndev); + if (r) + goto error; + + /* Update OTP */ + if (info->otp_version < info->otp_patch_version) { + r = fdp_nci_patch_otp(ndev); + if (r) + goto error; + patched = 1; + } + + /* Update RAM */ + if (info->ram_version < info->ram_patch_version) { + r = fdp_nci_patch_ram(ndev); + if (r) + goto error; + patched = 1; + } + + /* Release the firmware buffers */ + fdp_nci_release_firmware(ndev); + + /* If a patch was applied the new version is checked */ + if (patched) { + r = nci_core_init(ndev); + if (r) + goto error; + + r = fdp_nci_get_versions(ndev); + if (r) + goto error; + + if (info->otp_version != info->otp_patch_version || + info->ram_version != info->ram_patch_version) { + nfc_err(dev, "Firmware update failed"); + r = -EINVAL; + goto error; + } + } + + /* + * We initialized the devices but the NFC subsystem expects + * it to not be initialized. + */ + return nci_core_reset(ndev); + +error: + fdp_nci_release_firmware(ndev); + nfc_err(dev, "Setup error %d\n", r); + return r; +} + +static int fdp_nci_post_setup(struct nci_dev *ndev) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + int r; + + /* Check if the device has VSC */ + if (info->fw_vsc_cfg && info->fw_vsc_cfg[0]) { + + /* Set the vendor specific configuration */ + r = fdp_nci_set_production_data(ndev, info->fw_vsc_cfg[3], + &info->fw_vsc_cfg[4]); + if (r) { + nfc_err(dev, "Vendor specific config set error %d\n", + r); + return r; + } + } + + /* Set clock type and frequency */ + r = fdp_nci_set_clock(ndev, info->clock_type, info->clock_freq); + if (r) { + nfc_err(dev, "Clock set error %d\n", r); + return r; + } + + /* + * In order to apply the VSC FDP needs a reset + */ + r = nci_core_reset(ndev); + if (r) + return r; + + /** + * The nci core was initialized when post setup was called + * so we leave it like that + */ + return nci_core_init(ndev); +} + +static int fdp_nci_core_reset_ntf_packet(struct nci_dev *ndev, + struct sk_buff *skb) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + + dev_dbg(dev, "%s\n", __func__); + info->setup_reset_ntf = 1; + wake_up(&info->setup_wq); + + return 0; +} + +static int fdp_nci_prop_patch_ntf_packet(struct nci_dev *ndev, + struct sk_buff *skb) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + + dev_dbg(dev, "%s\n", __func__); + info->setup_patch_ntf = 1; + info->setup_patch_status = skb->data[0]; + wake_up(&info->setup_wq); + + return 0; +} + +static int fdp_nci_prop_patch_rsp_packet(struct nci_dev *ndev, + struct sk_buff *skb) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + u8 status = skb->data[0]; + + dev_dbg(dev, "%s: status 0x%x\n", __func__, status); + nci_req_complete(ndev, status); + + return 0; +} + +static int fdp_nci_prop_set_production_data_rsp_packet(struct nci_dev *ndev, + struct sk_buff *skb) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + u8 status = skb->data[0]; + + dev_dbg(dev, "%s: status 0x%x\n", __func__, status); + nci_req_complete(ndev, status); + + return 0; +} + +static int fdp_nci_core_get_config_rsp_packet(struct nci_dev *ndev, + struct sk_buff *skb) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + struct nci_core_get_config_rsp *rsp = (void *) skb->data; + u8 i, *p; + + if (rsp->status == NCI_STATUS_OK) { + + p = rsp->data; + for (i = 0; i < 4; i++) { + + switch (*p++) { + case NCI_PARAM_ID_FW_RAM_VERSION: + p++; + info->ram_version = le32_to_cpup((__le32 *) p); + p += 4; + break; + case NCI_PARAM_ID_FW_OTP_VERSION: + p++; + info->otp_version = le32_to_cpup((__le32 *) p); + p += 4; + break; + case NCI_PARAM_ID_OTP_LIMITED_VERSION: + p++; + info->otp_version = le32_to_cpup((__le32 *) p); + p += 4; + break; + case NCI_PARAM_ID_KEY_INDEX_ID: + p++; + info->key_index = *p++; + } + } + } + + dev_dbg(dev, "OTP version %d\n", info->otp_version); + dev_dbg(dev, "RAM version %d\n", info->ram_version); + dev_dbg(dev, "key index %d\n", info->key_index); + dev_dbg(dev, "%s: status 0x%x\n", __func__, rsp->status); + + nci_req_complete(ndev, rsp->status); + + return 0; +} + +static struct nci_driver_ops fdp_core_ops[] = { + { + .opcode = NCI_OP_CORE_GET_CONFIG_RSP, + .rsp = fdp_nci_core_get_config_rsp_packet, + }, + { + .opcode = NCI_OP_CORE_RESET_NTF, + .ntf = fdp_nci_core_reset_ntf_packet, + }, +}; + +static struct nci_driver_ops fdp_prop_ops[] = { + { + .opcode = nci_opcode_pack(NCI_GID_PROP, NCI_OP_PROP_PATCH_OID), + .rsp = fdp_nci_prop_patch_rsp_packet, + .ntf = fdp_nci_prop_patch_ntf_packet, + }, + { + .opcode = nci_opcode_pack(NCI_GID_PROP, + NCI_OP_PROP_SET_PDATA_OID), + .rsp = fdp_nci_prop_set_production_data_rsp_packet, + }, +}; + +struct nci_ops nci_ops = { + .open = fdp_nci_open, + .close = fdp_nci_close, + .send = fdp_nci_send, + .setup = fdp_nci_setup, + .post_setup = fdp_nci_post_setup, + .prop_ops = fdp_prop_ops, + .n_prop_ops = ARRAY_SIZE(fdp_prop_ops), + .core_ops = fdp_core_ops, + .n_core_ops = ARRAY_SIZE(fdp_core_ops), +}; + +int fdp_nci_probe(struct fdp_i2c_phy *phy, struct nfc_phy_ops *phy_ops, + struct nci_dev **ndevp, int tx_headroom, + int tx_tailroom, u8 clock_type, u32 clock_freq, + u8 *fw_vsc_cfg) +{ + struct device *dev = &phy->i2c_dev->dev; + struct fdp_nci_info *info; + struct nci_dev *ndev; + u32 protocols; + int r; + + info = kzalloc(sizeof(struct fdp_nci_info), GFP_KERNEL); + if (!info) { + r = -ENOMEM; + goto err_info_alloc; + } + + info->phy = phy; + info->phy_ops = phy_ops; + info->clock_type = clock_type; + info->clock_freq = clock_freq; + info->fw_vsc_cfg = fw_vsc_cfg; + + init_waitqueue_head(&info->setup_wq); + + protocols = NFC_PROTO_JEWEL_MASK | + NFC_PROTO_MIFARE_MASK | + NFC_PROTO_FELICA_MASK | + NFC_PROTO_ISO14443_MASK | + NFC_PROTO_ISO14443_B_MASK | + NFC_PROTO_NFC_DEP_MASK | + NFC_PROTO_ISO15693_MASK; + + ndev = nci_allocate_device(&nci_ops, protocols, tx_headroom, + tx_tailroom); + if (!ndev) { + nfc_err(dev, "Cannot allocate nfc ndev\n"); + r = -ENOMEM; + goto err_alloc_ndev; + } + + r = nci_register_device(ndev); + if (r) + goto err_regdev; + + *ndevp = ndev; + info->ndev = ndev; + + nci_set_drvdata(ndev, info); + + return 0; + +err_regdev: + nci_free_device(ndev); +err_alloc_ndev: + kfree(info); +err_info_alloc: + return r; +} +EXPORT_SYMBOL(fdp_nci_probe); + +void fdp_nci_remove(struct nci_dev *ndev) +{ + struct fdp_nci_info *info = nci_get_drvdata(ndev); + struct device *dev = &info->phy->i2c_dev->dev; + + dev_dbg(dev, "%s\n", __func__); + + nci_unregister_device(ndev); + nci_free_device(ndev); + kfree(info); +} +EXPORT_SYMBOL(fdp_nci_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("NFC NCI driver for Intel Fields Peak NFC controller"); +MODULE_AUTHOR("Robert Dolca <robert.dolca@intel.com>"); diff --git a/drivers/nfc/fdp/fdp.h b/drivers/nfc/fdp/fdp.h new file mode 100644 index 0000000..0bd36c0 --- /dev/null +++ b/drivers/nfc/fdp/fdp.h @@ -0,0 +1,38 @@ +/* ------------------------------------------------------------------------- + * Copyright (C) 2014-2016, Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * ------------------------------------------------------------------------- + */ + +#ifndef __LOCAL_FDP_H_ +#define __LOCAL_FDP_H_ + +#include <net/nfc/nci_core.h> +#include <linux/gpio/consumer.h> + +struct fdp_i2c_phy { + struct i2c_client *i2c_dev; + struct gpio_desc *power_gpio; + struct nci_dev *ndev; + + /* < 0 if i2c error occurred */ + int hard_fault; + uint16_t next_read_size; +}; + +int fdp_nci_probe(struct fdp_i2c_phy *phy, struct nfc_phy_ops *phy_ops, + struct nci_dev **ndev, int tx_headroom, int tx_tailroom, + u8 clock_type, u32 clock_freq, u8 *fw_vsc_cfg); +void fdp_nci_remove(struct nci_dev *ndev); +int fdp_nci_recv_frame(struct nci_dev *ndev, struct sk_buff *skb); + +#endif /* __LOCAL_FDP_H_ */ diff --git a/drivers/nfc/fdp/i2c.c b/drivers/nfc/fdp/i2c.c new file mode 100644 index 0000000..5e797d5 --- /dev/null +++ b/drivers/nfc/fdp/i2c.c @@ -0,0 +1,388 @@ +/* ------------------------------------------------------------------------- + * Copyright (C) 2014-2016, Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * ------------------------------------------------------------------------- + */ + +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/nfc.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <net/nfc/nfc.h> +#include <net/nfc/nci_core.h> + +#include "fdp.h" + +#define FDP_I2C_DRIVER_NAME "fdp_nci_i2c" + +#define FDP_DP_POWER_GPIO_NAME "power" +#define FDP_DP_CLOCK_TYPE_NAME "clock-type" +#define FDP_DP_CLOCK_FREQ_NAME "clock-freq" +#define FDP_DP_FW_VSC_CFG_NAME "fw-vsc-cfg" + +#define FDP_FRAME_HEADROOM 2 +#define FDP_FRAME_TAILROOM 1 + +#define FDP_NCI_I2C_MIN_PAYLOAD 5 +#define FDP_NCI_I2C_MAX_PAYLOAD 261 + +#define FDP_POWER_OFF 0 +#define FDP_POWER_ON 1 + +#define fdp_nci_i2c_dump_skb(dev, prefix, skb) \ + print_hex_dump(KERN_DEBUG, prefix": ", DUMP_PREFIX_OFFSET, \ + 16, 1, (skb)->data, (skb)->len, 0) + +static void fdp_nci_i2c_reset(struct fdp_i2c_phy *phy) +{ + /* Reset RST/WakeUP for at least 100 micro-second */ + gpiod_set_value_cansleep(phy->power_gpio, FDP_POWER_OFF); + usleep_range(1000, 4000); + gpiod_set_value_cansleep(phy->power_gpio, FDP_POWER_ON); + usleep_range(10000, 14000); +} + +static int fdp_nci_i2c_enable(void *phy_id) +{ + struct fdp_i2c_phy *phy = phy_id; + + dev_dbg(&phy->i2c_dev->dev, "%s\n", __func__); + fdp_nci_i2c_reset(phy); + + return 0; +} + +static void fdp_nci_i2c_disable(void *phy_id) +{ + struct fdp_i2c_phy *phy = phy_id; + + dev_dbg(&phy->i2c_dev->dev, "%s\n", __func__); + fdp_nci_i2c_reset(phy); +} + +static void fdp_nci_i2c_add_len_lrc(struct sk_buff *skb) +{ + u8 lrc = 0; + u16 len, i; + + /* Add length header */ + len = skb->len; + *skb_push(skb, 1) = len & 0xff; + *skb_push(skb, 1) = len >> 8; + + /* Compute and add lrc */ + for (i = 0; i < len + 2; i++) + lrc ^= skb->data[i]; + + *skb_put(skb, 1) = lrc; +} + +static void fdp_nci_i2c_remove_len_lrc(struct sk_buff *skb) +{ + skb_pull(skb, FDP_FRAME_HEADROOM); + skb_trim(skb, skb->len - FDP_FRAME_TAILROOM); +} + +static int fdp_nci_i2c_write(void *phy_id, struct sk_buff *skb) +{ + struct fdp_i2c_phy *phy = phy_id; + struct i2c_client *client = phy->i2c_dev; + int r; + + if (phy->hard_fault != 0) + return phy->hard_fault; + + fdp_nci_i2c_add_len_lrc(skb); + fdp_nci_i2c_dump_skb(&client->dev, "fdp_wr", skb); + + r = i2c_master_send(client, skb->data, skb->len); + if (r == -EREMOTEIO) { /* Retry, chip was in standby */ + usleep_range(1000, 4000); + r = i2c_master_send(client, skb->data, skb->len); + } + + if (r < 0 || r != skb->len) + dev_dbg(&client->dev, "%s: error err=%d len=%d\n", + __func__, r, skb->len); + + if (r >= 0) { + if (r != skb->len) { + phy->hard_fault = r; + r = -EREMOTEIO; + } else { + r = 0; + } + } + + fdp_nci_i2c_remove_len_lrc(skb); + + return r; +} + +static struct nfc_phy_ops i2c_phy_ops = { + .write = fdp_nci_i2c_write, + .enable = fdp_nci_i2c_enable, + .disable = fdp_nci_i2c_disable, +}; + +static int fdp_nci_i2c_read(struct fdp_i2c_phy *phy, struct sk_buff **skb) +{ + int r, len; + u8 tmp[FDP_NCI_I2C_MAX_PAYLOAD], lrc, k; + u16 i; + struct i2c_client *client = phy->i2c_dev; + + *skb = NULL; + + /* Read the length packet and the data packet */ + for (k = 0; k < 2; k++) { + + len = phy->next_read_size; + + r = i2c_master_recv(client, tmp, len); + if (r != len) { + dev_dbg(&client->dev, "%s: i2c recv err: %d\n", + __func__, r); + goto flush; + } + + /* Check packet integruty */ + for (lrc = i = 0; i < r; i++) + lrc ^= tmp[i]; + + /* + * LRC check failed. This may due to transmission error or + * desynchronization between driver and FDP. Drop the paquet + * and force resynchronization + */ + if (lrc) { + dev_dbg(&client->dev, "%s: corrupted packet\n", + __func__); + phy->next_read_size = 5; + goto flush; + } + + /* Packet that contains a length */ + if (tmp[0] == 0 && tmp[1] == 0) { + phy->next_read_size = (tmp[2] << 8) + tmp[3] + 3; + } else { + phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD; + + *skb = alloc_skb(len, GFP_KERNEL); + if (*skb == NULL) { + r = -ENOMEM; + goto flush; + } + + memcpy(skb_put(*skb, len), tmp, len); + fdp_nci_i2c_dump_skb(&client->dev, "fdp_rd", *skb); + + fdp_nci_i2c_remove_len_lrc(*skb); + } + } + + return 0; + +flush: + /* Flush the remaining data */ + if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0) + r = -EREMOTEIO; + + return r; +} + +static irqreturn_t fdp_nci_i2c_irq_thread_fn(int irq, void *phy_id) +{ + struct fdp_i2c_phy *phy = phy_id; + struct i2c_client *client; + struct sk_buff *skb; + int r; + + client = phy->i2c_dev; + dev_dbg(&client->dev, "%s\n", __func__); + + if (!phy || irq != phy->i2c_dev->irq) { + WARN_ON_ONCE(1); + return IRQ_NONE; + } + + r = fdp_nci_i2c_read(phy, &skb); + + if (r == -EREMOTEIO) + return IRQ_HANDLED; + else if (r == -ENOMEM || r == -EBADMSG) + return IRQ_HANDLED; + + if (skb != NULL) + fdp_nci_recv_frame(phy->ndev, skb); + + return IRQ_HANDLED; +} + +static void fdp_nci_i2c_read_device_properties(struct device *dev, + u8 *clock_type, u32 *clock_freq, + u8 **fw_vsc_cfg) +{ + int r; + u8 len; + + r = device_property_read_u8(dev, FDP_DP_CLOCK_TYPE_NAME, clock_type); + if (r) { + dev_dbg(dev, "Using default clock type"); + *clock_type = 0; + } + + r = device_property_read_u32(dev, FDP_DP_CLOCK_FREQ_NAME, clock_freq); + if (r) { + dev_dbg(dev, "Using default clock frequency\n"); + *clock_freq = 26000; + } + + if (device_property_present(dev, FDP_DP_FW_VSC_CFG_NAME)) { + r = device_property_read_u8(dev, FDP_DP_FW_VSC_CFG_NAME, + &len); + + if (r || len <= 0) + goto vsc_read_err; + + /* Add 1 to the length to inclue the length byte itself */ + len++; + + *fw_vsc_cfg = devm_kmalloc(dev, + len * sizeof(**fw_vsc_cfg), + GFP_KERNEL); + + r = device_property_read_u8_array(dev, FDP_DP_FW_VSC_CFG_NAME, + *fw_vsc_cfg, len); + + if (r) { + devm_kfree(dev, fw_vsc_cfg); + goto vsc_read_err; + } + } else { +vsc_read_err: + dev_dbg(dev, "FW vendor specific commands not present\n"); + *fw_vsc_cfg = NULL; + } + + dev_dbg(dev, "Clock type: %d, clock frequency: %d, VSC: %s", + *clock_type, *clock_freq, *fw_vsc_cfg != NULL ? "yes" : "no"); +} + +static int fdp_nci_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fdp_i2c_phy *phy; + struct device *dev = &client->dev; + u8 *fw_vsc_cfg; + u8 clock_type; + u32 clock_freq; + int r = 0; + + dev_dbg(dev, "%s\n", __func__); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + nfc_err(dev, "No I2C_FUNC_I2C support\n"); + return -ENODEV; + } + + /* Checking if we have an irq */ + if (client->irq <= 0) { + nfc_err(dev, "IRQ not present\n"); + return -ENODEV; + } + + phy = devm_kzalloc(dev, sizeof(struct fdp_i2c_phy), + GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->i2c_dev = client; + phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD; + i2c_set_clientdata(client, phy); + + r = request_threaded_irq(client->irq, NULL, fdp_nci_i2c_irq_thread_fn, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + FDP_I2C_DRIVER_NAME, phy); + + if (r < 0) { + nfc_err(&client->dev, "Unable to register IRQ handler\n"); + return r; + } + + /* Requesting the power gpio */ + phy->power_gpio = devm_gpiod_get(dev, FDP_DP_POWER_GPIO_NAME, + GPIOD_OUT_LOW); + + if (IS_ERR(phy->power_gpio)) { + nfc_err(dev, "Power GPIO request failed\n"); + return PTR_ERR(phy->power_gpio); + } + + /* read device properties to get the clock and production settings */ + fdp_nci_i2c_read_device_properties(dev, &clock_type, &clock_freq, + &fw_vsc_cfg); + + /* Call the NFC specific probe function */ + r = fdp_nci_probe(phy, &i2c_phy_ops, &phy->ndev, + FDP_FRAME_HEADROOM, FDP_FRAME_TAILROOM, + clock_type, clock_freq, fw_vsc_cfg); + if (r < 0) { + nfc_err(dev, "NCI probing error\n"); + return r; + } + + dev_dbg(dev, "I2C driver loaded\n"); + return 0; +} + +static int fdp_nci_i2c_remove(struct i2c_client *client) +{ + struct fdp_i2c_phy *phy = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "%s\n", __func__); + + fdp_nci_remove(phy->ndev); + fdp_nci_i2c_disable(phy); + + return 0; +} + +static struct i2c_device_id fdp_nci_i2c_id_table[] = { + {"int339a", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, fdp_nci_i2c_id_table); + +static const struct acpi_device_id fdp_nci_i2c_acpi_match[] = { + {"INT339A", 0}, + {} +}; +MODULE_DEVICE_TABLE(acpi, fdp_nci_i2c_acpi_match); + +static struct i2c_driver fdp_nci_i2c_driver = { + .driver = { + .name = FDP_I2C_DRIVER_NAME, + .acpi_match_table = ACPI_PTR(fdp_nci_i2c_acpi_match), + }, + .id_table = fdp_nci_i2c_id_table, + .probe = fdp_nci_i2c_probe, + .remove = fdp_nci_i2c_remove, +}; +module_i2c_driver(fdp_nci_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("I2C driver for Intel Fields Peak NFC controller"); +MODULE_AUTHOR("Robert Dolca <robert.dolca@intel.com>"); diff --git a/drivers/nfc/mei_phy.c b/drivers/nfc/mei_phy.c new file mode 100644 index 0000000..49bdc2f --- /dev/null +++ b/drivers/nfc/mei_phy.c @@ -0,0 +1,417 @@ +/* + * MEI Library for mei bus nfc device access + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/nfc.h> + +#include "mei_phy.h" + +struct mei_nfc_hdr { + u8 cmd; + u8 status; + u16 req_id; + u32 reserved; + u16 data_size; +} __packed; + +struct mei_nfc_cmd { + struct mei_nfc_hdr hdr; + u8 sub_command; + u8 data[]; +} __packed; + +struct mei_nfc_reply { + struct mei_nfc_hdr hdr; + u8 sub_command; + u8 reply_status; + u8 data[]; +} __packed; + +struct mei_nfc_if_version { + u8 radio_version_sw[3]; + u8 reserved[3]; + u8 radio_version_hw[3]; + u8 i2c_addr; + u8 fw_ivn; + u8 vendor_id; + u8 radio_type; +} __packed; + +struct mei_nfc_connect { + u8 fw_ivn; + u8 vendor_id; +} __packed; + +struct mei_nfc_connect_resp { + u8 fw_ivn; + u8 vendor_id; + u16 me_major; + u16 me_minor; + u16 me_hotfix; + u16 me_build; +} __packed; + + +#define MEI_NFC_CMD_MAINTENANCE 0x00 +#define MEI_NFC_CMD_HCI_SEND 0x01 +#define MEI_NFC_CMD_HCI_RECV 0x02 + +#define MEI_NFC_SUBCMD_CONNECT 0x00 +#define MEI_NFC_SUBCMD_IF_VERSION 0x01 + +#define MEI_NFC_MAX_READ (MEI_NFC_HEADER_SIZE + MEI_NFC_MAX_HCI_PAYLOAD) + +#define MEI_DUMP_SKB_IN(info, skb) \ +do { \ + pr_debug("%s:\n", info); \ + print_hex_dump_debug("mei in : ", DUMP_PREFIX_OFFSET, \ + 16, 1, (skb)->data, (skb)->len, false); \ +} while (0) + +#define MEI_DUMP_SKB_OUT(info, skb) \ +do { \ + pr_debug("%s:\n", info); \ + print_hex_dump_debug("mei out: ", DUMP_PREFIX_OFFSET, \ + 16, 1, (skb)->data, (skb)->len, false); \ +} while (0) + +#define MEI_DUMP_NFC_HDR(info, _hdr) \ +do { \ + pr_debug("%s:\n", info); \ + pr_debug("cmd=%02d status=%d req_id=%d rsvd=%d size=%d\n", \ + (_hdr)->cmd, (_hdr)->status, (_hdr)->req_id, \ + (_hdr)->reserved, (_hdr)->data_size); \ +} while (0) + +static int mei_nfc_if_version(struct nfc_mei_phy *phy) +{ + + struct mei_nfc_cmd cmd; + struct mei_nfc_reply *reply = NULL; + struct mei_nfc_if_version *version; + size_t if_version_length; + int bytes_recv, r; + + pr_info("%s\n", __func__); + + memset(&cmd, 0, sizeof(struct mei_nfc_cmd)); + cmd.hdr.cmd = MEI_NFC_CMD_MAINTENANCE; + cmd.hdr.data_size = 1; + cmd.sub_command = MEI_NFC_SUBCMD_IF_VERSION; + + MEI_DUMP_NFC_HDR("version", &cmd.hdr); + r = mei_cldev_send(phy->cldev, (u8 *)&cmd, sizeof(struct mei_nfc_cmd)); + if (r < 0) { + pr_err("Could not send IF version cmd\n"); + return r; + } + + /* to be sure on the stack we alloc memory */ + if_version_length = sizeof(struct mei_nfc_reply) + + sizeof(struct mei_nfc_if_version); + + reply = kzalloc(if_version_length, GFP_KERNEL); + if (!reply) + return -ENOMEM; + + bytes_recv = mei_cldev_recv(phy->cldev, (u8 *)reply, if_version_length); + if (bytes_recv < 0 || bytes_recv < if_version_length) { + pr_err("Could not read IF version\n"); + r = -EIO; + goto err; + } + + version = (struct mei_nfc_if_version *)reply->data; + + phy->fw_ivn = version->fw_ivn; + phy->vendor_id = version->vendor_id; + phy->radio_type = version->radio_type; + +err: + kfree(reply); + return r; +} + +static int mei_nfc_connect(struct nfc_mei_phy *phy) +{ + struct mei_nfc_cmd *cmd, *reply; + struct mei_nfc_connect *connect; + struct mei_nfc_connect_resp *connect_resp; + size_t connect_length, connect_resp_length; + int bytes_recv, r; + + pr_info("%s\n", __func__); + + connect_length = sizeof(struct mei_nfc_cmd) + + sizeof(struct mei_nfc_connect); + + connect_resp_length = sizeof(struct mei_nfc_cmd) + + sizeof(struct mei_nfc_connect_resp); + + cmd = kzalloc(connect_length, GFP_KERNEL); + if (!cmd) + return -ENOMEM; + connect = (struct mei_nfc_connect *)cmd->data; + + reply = kzalloc(connect_resp_length, GFP_KERNEL); + if (!reply) { + kfree(cmd); + return -ENOMEM; + } + + connect_resp = (struct mei_nfc_connect_resp *)reply->data; + + cmd->hdr.cmd = MEI_NFC_CMD_MAINTENANCE; + cmd->hdr.data_size = 3; + cmd->sub_command = MEI_NFC_SUBCMD_CONNECT; + connect->fw_ivn = phy->fw_ivn; + connect->vendor_id = phy->vendor_id; + + MEI_DUMP_NFC_HDR("connect request", &cmd->hdr); + r = mei_cldev_send(phy->cldev, (u8 *)cmd, connect_length); + if (r < 0) { + pr_err("Could not send connect cmd %d\n", r); + goto err; + } + + bytes_recv = mei_cldev_recv(phy->cldev, (u8 *)reply, + connect_resp_length); + if (bytes_recv < 0) { + r = bytes_recv; + pr_err("Could not read connect response %d\n", r); + goto err; + } + + MEI_DUMP_NFC_HDR("connect reply", &reply->hdr); + + pr_info("IVN 0x%x Vendor ID 0x%x\n", + connect_resp->fw_ivn, connect_resp->vendor_id); + + pr_info("ME FW %d.%d.%d.%d\n", + connect_resp->me_major, connect_resp->me_minor, + connect_resp->me_hotfix, connect_resp->me_build); + + r = 0; + +err: + kfree(reply); + kfree(cmd); + + return r; +} + +static int mei_nfc_send(struct nfc_mei_phy *phy, u8 *buf, size_t length) +{ + struct mei_nfc_hdr *hdr; + u8 *mei_buf; + int err; + + err = -ENOMEM; + mei_buf = kzalloc(length + MEI_NFC_HEADER_SIZE, GFP_KERNEL); + if (!mei_buf) + goto out; + + hdr = (struct mei_nfc_hdr *)mei_buf; + hdr->cmd = MEI_NFC_CMD_HCI_SEND; + hdr->status = 0; + hdr->req_id = phy->req_id; + hdr->reserved = 0; + hdr->data_size = length; + + MEI_DUMP_NFC_HDR("send", hdr); + + memcpy(mei_buf + MEI_NFC_HEADER_SIZE, buf, length); + err = mei_cldev_send(phy->cldev, mei_buf, length + MEI_NFC_HEADER_SIZE); + if (err < 0) + goto out; + + if (!wait_event_interruptible_timeout(phy->send_wq, + phy->recv_req_id == phy->req_id, HZ)) { + pr_err("NFC MEI command timeout\n"); + err = -ETIME; + } else { + phy->req_id++; + } +out: + kfree(mei_buf); + return err; +} + +/* + * Writing a frame must not return the number of written bytes. + * It must return either zero for success, or <0 for error. + * In addition, it must not alter the skb + */ +static int nfc_mei_phy_write(void *phy_id, struct sk_buff *skb) +{ + struct nfc_mei_phy *phy = phy_id; + int r; + + MEI_DUMP_SKB_OUT("mei frame sent", skb); + + r = mei_nfc_send(phy, skb->data, skb->len); + if (r > 0) + r = 0; + + return r; +} + +static int mei_nfc_recv(struct nfc_mei_phy *phy, u8 *buf, size_t length) +{ + struct mei_nfc_hdr *hdr; + int received_length; + + received_length = mei_cldev_recv(phy->cldev, buf, length); + if (received_length < 0) + return received_length; + + hdr = (struct mei_nfc_hdr *) buf; + + MEI_DUMP_NFC_HDR("receive", hdr); + if (hdr->cmd == MEI_NFC_CMD_HCI_SEND) { + phy->recv_req_id = hdr->req_id; + wake_up(&phy->send_wq); + + return 0; + } + + return received_length; +} + + +static void nfc_mei_rx_cb(struct mei_cl_device *cldev) +{ + struct nfc_mei_phy *phy = mei_cldev_get_drvdata(cldev); + struct sk_buff *skb; + int reply_size; + + if (!phy) + return; + + if (phy->hard_fault != 0) + return; + + skb = alloc_skb(MEI_NFC_MAX_READ, GFP_KERNEL); + if (!skb) + return; + + reply_size = mei_nfc_recv(phy, skb->data, MEI_NFC_MAX_READ); + if (reply_size < MEI_NFC_HEADER_SIZE) { + kfree_skb(skb); + return; + } + + skb_put(skb, reply_size); + skb_pull(skb, MEI_NFC_HEADER_SIZE); + + MEI_DUMP_SKB_IN("mei frame read", skb); + + nfc_hci_recv_frame(phy->hdev, skb); +} + +static int nfc_mei_phy_enable(void *phy_id) +{ + int r; + struct nfc_mei_phy *phy = phy_id; + + pr_info("%s\n", __func__); + + if (phy->powered == 1) + return 0; + + r = mei_cldev_enable(phy->cldev); + if (r < 0) { + pr_err("Could not enable device %d\n", r); + return r; + } + + r = mei_nfc_if_version(phy); + if (r < 0) { + pr_err("Could not enable device %d\n", r); + goto err; + } + + r = mei_nfc_connect(phy); + if (r < 0) { + pr_err("Could not connect to device %d\n", r); + goto err; + } + + r = mei_cldev_register_rx_cb(phy->cldev, nfc_mei_rx_cb); + if (r) { + pr_err("Event cb registration failed %d\n", r); + goto err; + } + + phy->powered = 1; + + return 0; + +err: + phy->powered = 0; + mei_cldev_disable(phy->cldev); + return r; +} + +static void nfc_mei_phy_disable(void *phy_id) +{ + struct nfc_mei_phy *phy = phy_id; + + pr_info("%s\n", __func__); + + mei_cldev_disable(phy->cldev); + + phy->powered = 0; +} + +struct nfc_phy_ops mei_phy_ops = { + .write = nfc_mei_phy_write, + .enable = nfc_mei_phy_enable, + .disable = nfc_mei_phy_disable, +}; +EXPORT_SYMBOL_GPL(mei_phy_ops); + +struct nfc_mei_phy *nfc_mei_phy_alloc(struct mei_cl_device *cldev) +{ + struct nfc_mei_phy *phy; + + phy = kzalloc(sizeof(struct nfc_mei_phy), GFP_KERNEL); + if (!phy) + return NULL; + + phy->cldev = cldev; + init_waitqueue_head(&phy->send_wq); + mei_cldev_set_drvdata(cldev, phy); + + return phy; +} +EXPORT_SYMBOL_GPL(nfc_mei_phy_alloc); + +void nfc_mei_phy_free(struct nfc_mei_phy *phy) +{ + mei_cldev_disable(phy->cldev); + kfree(phy); +} +EXPORT_SYMBOL_GPL(nfc_mei_phy_free); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("mei bus NFC device interface"); diff --git a/drivers/nfc/mei_phy.h b/drivers/nfc/mei_phy.h new file mode 100644 index 0000000..acd3a1f --- /dev/null +++ b/drivers/nfc/mei_phy.h @@ -0,0 +1,52 @@ +#ifndef __LOCAL_MEI_PHY_H_ +#define __LOCAL_MEI_PHY_H_ + +#include <linux/mei_cl_bus.h> +#include <net/nfc/hci.h> +#include <linux/uuid.h> + +#define MEI_NFC_UUID UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, \ + 0x94, 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c) +#define MEI_NFC_HEADER_SIZE 10 +#define MEI_NFC_MAX_HCI_PAYLOAD 300 + +/** + * struct nfc_mei_phy + * + * @cldev: mei client device + * @hdev: nfc hci device + + * @send_wq: send completion wait queue + * @fw_ivn: NFC Interface Version Number + * @vendor_id: NFC manufacturer ID + * @radio_type: NFC radio type + * @reserved: reserved for alignment + * @req_id: message counter + * @recv_req_id: reception message counter + * @powered: the device is in powered state + * @hard_fault: < 0 if hardware error occurred + * and prevents normal operation. + */ +struct nfc_mei_phy { + struct mei_cl_device *cldev; + struct nfc_hci_dev *hdev; + + wait_queue_head_t send_wq; + u8 fw_ivn; + u8 vendor_id; + u8 radio_type; + u8 reserved; + + u16 req_id; + u16 recv_req_id; + + int powered; + int hard_fault; +}; + +extern struct nfc_phy_ops mei_phy_ops; + +struct nfc_mei_phy *nfc_mei_phy_alloc(struct mei_cl_device *device); +void nfc_mei_phy_free(struct nfc_mei_phy *phy); + +#endif /* __LOCAL_MEI_PHY_H_ */ diff --git a/drivers/nfc/microread/Kconfig b/drivers/nfc/microread/Kconfig new file mode 100644 index 0000000..5c5f72a --- /dev/null +++ b/drivers/nfc/microread/Kconfig @@ -0,0 +1,34 @@ +config NFC_MICROREAD + tristate + depends on m + depends on CRC_CCITT + ---help--- + This module contains the main code for Inside Secure microread + NFC chipsets. It implements the chipset HCI logic and hooks into + the NFC kernel APIs. Physical layers will register against it. + +config NFC_MICROREAD_I2C + tristate "Inside Secure Microread device support (I2C)" + depends on m + depends on NFC_HCI && I2C && NFC_SHDLC + select NFC_MICROREAD + ---help--- + This module adds support for the i2c interface of adapters using + Inside microread chipsets. Select this if your platform is using + the i2c bus. + + If you choose to build a module, it'll be called microread_i2c. + Say N if unsure. + +config NFC_MICROREAD_MEI + tristate "Inside Secure Microread device support (MEI)" + depends on m + depends on NFC_HCI && NFC_MEI_PHY + select NFC_MICROREAD + ---help--- + This module adds support for the mei interface of adapters using + Inside microread chipsets. Select this if your microread chipset + is handled by Intel's Management Engine Interface on your platform. + + If you choose to build a module, it'll be called microread_mei. + Say N if unsure. diff --git a/drivers/nfc/microread/Makefile b/drivers/nfc/microread/Makefile new file mode 100644 index 0000000..c44077a --- /dev/null +++ b/drivers/nfc/microread/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for Microread HCI based NFC driver +# + +microread_i2c-objs = i2c.o +microread_mei-objs = mei.o + +obj-$(CPTCFG_NFC_MICROREAD) += microread.o +obj-$(CPTCFG_NFC_MICROREAD_I2C) += microread_i2c.o +obj-$(CPTCFG_NFC_MICROREAD_MEI) += microread_mei.o diff --git a/drivers/nfc/microread/i2c.c b/drivers/nfc/microread/i2c.c new file mode 100644 index 0000000..e0e8afd --- /dev/null +++ b/drivers/nfc/microread/i2c.c @@ -0,0 +1,315 @@ +/* + * HCI based Driver for Inside Secure microread NFC Chip - i2c layer + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> + +#include <linux/nfc.h> +#include <net/nfc/hci.h> +#include <net/nfc/llc.h> + +#include "microread.h" + +#define MICROREAD_I2C_DRIVER_NAME "microread" + +#define MICROREAD_I2C_FRAME_HEADROOM 1 +#define MICROREAD_I2C_FRAME_TAILROOM 1 + +/* framing in HCI mode */ +#define MICROREAD_I2C_LLC_LEN 1 +#define MICROREAD_I2C_LLC_CRC 1 +#define MICROREAD_I2C_LLC_LEN_CRC (MICROREAD_I2C_LLC_LEN + \ + MICROREAD_I2C_LLC_CRC) +#define MICROREAD_I2C_LLC_MIN_SIZE (1 + MICROREAD_I2C_LLC_LEN_CRC) +#define MICROREAD_I2C_LLC_MAX_PAYLOAD 29 +#define MICROREAD_I2C_LLC_MAX_SIZE (MICROREAD_I2C_LLC_LEN_CRC + 1 + \ + MICROREAD_I2C_LLC_MAX_PAYLOAD) + +struct microread_i2c_phy { + struct i2c_client *i2c_dev; + struct nfc_hci_dev *hdev; + + int hard_fault; /* + * < 0 if hardware error occured (e.g. i2c err) + * and prevents normal operation. + */ +}; + +#define I2C_DUMP_SKB(info, skb) \ +do { \ + pr_debug("%s:\n", info); \ + print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \ + 16, 1, (skb)->data, (skb)->len, 0); \ +} while (0) + +static void microread_i2c_add_len_crc(struct sk_buff *skb) +{ + int i; + u8 crc = 0; + int len; + + len = skb->len; + *skb_push(skb, 1) = len; + + for (i = 0; i < skb->len; i++) + crc = crc ^ skb->data[i]; + + *skb_put(skb, 1) = crc; +} + +static void microread_i2c_remove_len_crc(struct sk_buff *skb) +{ + skb_pull(skb, MICROREAD_I2C_FRAME_HEADROOM); + skb_trim(skb, MICROREAD_I2C_FRAME_TAILROOM); +} + +static int check_crc(struct sk_buff *skb) +{ + int i; + u8 crc = 0; + + for (i = 0; i < skb->len - 1; i++) + crc = crc ^ skb->data[i]; + + if (crc != skb->data[skb->len-1]) { + pr_err("CRC error 0x%x != 0x%x\n", crc, skb->data[skb->len-1]); + pr_info("%s: BAD CRC\n", __func__); + return -EPERM; + } + + return 0; +} + +static int microread_i2c_enable(void *phy_id) +{ + return 0; +} + +static void microread_i2c_disable(void *phy_id) +{ + return; +} + +static int microread_i2c_write(void *phy_id, struct sk_buff *skb) +{ + int r; + struct microread_i2c_phy *phy = phy_id; + struct i2c_client *client = phy->i2c_dev; + + if (phy->hard_fault != 0) + return phy->hard_fault; + + usleep_range(3000, 6000); + + microread_i2c_add_len_crc(skb); + + I2C_DUMP_SKB("i2c frame written", skb); + + r = i2c_master_send(client, skb->data, skb->len); + + if (r == -EREMOTEIO) { /* Retry, chip was in standby */ + usleep_range(6000, 10000); + r = i2c_master_send(client, skb->data, skb->len); + } + + if (r >= 0) { + if (r != skb->len) + r = -EREMOTEIO; + else + r = 0; + } + + microread_i2c_remove_len_crc(skb); + + return r; +} + + +static int microread_i2c_read(struct microread_i2c_phy *phy, + struct sk_buff **skb) +{ + int r; + u8 len; + u8 tmp[MICROREAD_I2C_LLC_MAX_SIZE - 1]; + struct i2c_client *client = phy->i2c_dev; + + r = i2c_master_recv(client, &len, 1); + if (r != 1) { + nfc_err(&client->dev, "cannot read len byte\n"); + return -EREMOTEIO; + } + + if ((len < MICROREAD_I2C_LLC_MIN_SIZE) || + (len > MICROREAD_I2C_LLC_MAX_SIZE)) { + nfc_err(&client->dev, "invalid len byte\n"); + r = -EBADMSG; + goto flush; + } + + *skb = alloc_skb(1 + len, GFP_KERNEL); + if (*skb == NULL) { + r = -ENOMEM; + goto flush; + } + + *skb_put(*skb, 1) = len; + + r = i2c_master_recv(client, skb_put(*skb, len), len); + if (r != len) { + kfree_skb(*skb); + return -EREMOTEIO; + } + + I2C_DUMP_SKB("cc frame read", *skb); + + r = check_crc(*skb); + if (r != 0) { + kfree_skb(*skb); + r = -EBADMSG; + goto flush; + } + + skb_pull(*skb, 1); + skb_trim(*skb, (*skb)->len - MICROREAD_I2C_FRAME_TAILROOM); + + usleep_range(3000, 6000); + + return 0; + +flush: + if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0) + r = -EREMOTEIO; + + usleep_range(3000, 6000); + + return r; +} + +static irqreturn_t microread_i2c_irq_thread_fn(int irq, void *phy_id) +{ + struct microread_i2c_phy *phy = phy_id; + struct sk_buff *skb = NULL; + int r; + + if (!phy || irq != phy->i2c_dev->irq) { + WARN_ON_ONCE(1); + return IRQ_NONE; + } + + if (phy->hard_fault != 0) + return IRQ_HANDLED; + + r = microread_i2c_read(phy, &skb); + if (r == -EREMOTEIO) { + phy->hard_fault = r; + + nfc_hci_recv_frame(phy->hdev, NULL); + + return IRQ_HANDLED; + } else if ((r == -ENOMEM) || (r == -EBADMSG)) { + return IRQ_HANDLED; + } + + nfc_hci_recv_frame(phy->hdev, skb); + + return IRQ_HANDLED; +} + +static struct nfc_phy_ops i2c_phy_ops = { + .write = microread_i2c_write, + .enable = microread_i2c_enable, + .disable = microread_i2c_disable, +}; + +static int microread_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct microread_i2c_phy *phy; + int r; + + dev_dbg(&client->dev, "client %p\n", client); + + phy = devm_kzalloc(&client->dev, sizeof(struct microread_i2c_phy), + GFP_KERNEL); + if (!phy) + return -ENOMEM; + + i2c_set_clientdata(client, phy); + phy->i2c_dev = client; + + r = request_threaded_irq(client->irq, NULL, microread_i2c_irq_thread_fn, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + MICROREAD_I2C_DRIVER_NAME, phy); + if (r) { + nfc_err(&client->dev, "Unable to register IRQ handler\n"); + return r; + } + + r = microread_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME, + MICROREAD_I2C_FRAME_HEADROOM, + MICROREAD_I2C_FRAME_TAILROOM, + MICROREAD_I2C_LLC_MAX_PAYLOAD, &phy->hdev); + if (r < 0) + goto err_irq; + + nfc_info(&client->dev, "Probed\n"); + + return 0; + +err_irq: + free_irq(client->irq, phy); + + return r; +} + +static int microread_i2c_remove(struct i2c_client *client) +{ + struct microread_i2c_phy *phy = i2c_get_clientdata(client); + + microread_remove(phy->hdev); + + free_irq(client->irq, phy); + + return 0; +} + +static struct i2c_device_id microread_i2c_id[] = { + { MICROREAD_I2C_DRIVER_NAME, 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, microread_i2c_id); + +static struct i2c_driver microread_i2c_driver = { + .driver = { + .name = MICROREAD_I2C_DRIVER_NAME, + }, + .probe = microread_i2c_probe, + .remove = microread_i2c_remove, + .id_table = microread_i2c_id, +}; + +module_i2c_driver(microread_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c new file mode 100644 index 0000000..5d9e51b --- /dev/null +++ b/drivers/nfc/microread/mei.c @@ -0,0 +1,94 @@ +/* + * HCI based Driver for Inside Secure microread NFC Chip + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/nfc.h> +#include <net/nfc/hci.h> +#include <net/nfc/llc.h> + +#include "../mei_phy.h" +#include "microread.h" + +#define MICROREAD_DRIVER_NAME "microread" + +static int microread_mei_probe(struct mei_cl_device *cldev, + const struct mei_cl_device_id *id) +{ + struct nfc_mei_phy *phy; + int r; + + pr_info("Probing NFC microread\n"); + + phy = nfc_mei_phy_alloc(cldev); + if (!phy) { + pr_err("Cannot allocate memory for microread mei phy.\n"); + return -ENOMEM; + } + + r = microread_probe(phy, &mei_phy_ops, LLC_NOP_NAME, + MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, + &phy->hdev); + if (r < 0) { + nfc_mei_phy_free(phy); + + return r; + } + + return 0; +} + +static int microread_mei_remove(struct mei_cl_device *cldev) +{ + struct nfc_mei_phy *phy = mei_cldev_get_drvdata(cldev); + + microread_remove(phy->hdev); + + nfc_mei_phy_free(phy); + + return 0; +} + +static struct mei_cl_device_id microread_mei_tbl[] = { +#if LINUX_VERSION_IS_GEQ(4,4,0) + { MICROREAD_DRIVER_NAME, MEI_NFC_UUID, MEI_CL_VERSION_ANY}, +#elif LINUX_VERSION_IS_GEQ(4,2,0) + { MICROREAD_DRIVER_NAME, MEI_NFC_UUID}, +#else + { MICROREAD_DRIVER_NAME}, +#endif + + /* required last entry */ + { } +}; +MODULE_DEVICE_TABLE(mei, microread_mei_tbl); + +static struct mei_cl_driver microread_driver = { + .id_table = microread_mei_tbl, + .name = MICROREAD_DRIVER_NAME, + + .probe = microread_mei_probe, + .remove = microread_mei_remove, +}; + +module_mei_cl_driver(microread_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/microread/microread.c b/drivers/nfc/microread/microread.c new file mode 100644 index 0000000..f454dc6 --- /dev/null +++ b/drivers/nfc/microread/microread.c @@ -0,0 +1,734 @@ +/* + * HCI based Driver for Inside Secure microread NFC Chip + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/crc-ccitt.h> + +#include <linux/nfc.h> +#include <net/nfc/nfc.h> +#include <net/nfc/hci.h> +#include <net/nfc/llc.h> + +#include "microread.h" + +/* Proprietary gates, events, commands and registers */ +/* Admin */ +#define MICROREAD_GATE_ID_ADM NFC_HCI_ADMIN_GATE +#define MICROREAD_GATE_ID_MGT 0x01 +#define MICROREAD_GATE_ID_OS 0x02 +#define MICROREAD_GATE_ID_TESTRF 0x03 +#define MICROREAD_GATE_ID_LOOPBACK NFC_HCI_LOOPBACK_GATE +#define MICROREAD_GATE_ID_IDT NFC_HCI_ID_MGMT_GATE +#define MICROREAD_GATE_ID_LMS NFC_HCI_LINK_MGMT_GATE + +/* Reader */ +#define MICROREAD_GATE_ID_MREAD_GEN 0x10 +#define MICROREAD_GATE_ID_MREAD_ISO_B NFC_HCI_RF_READER_B_GATE +#define MICROREAD_GATE_ID_MREAD_NFC_T1 0x12 +#define MICROREAD_GATE_ID_MREAD_ISO_A NFC_HCI_RF_READER_A_GATE +#define MICROREAD_GATE_ID_MREAD_NFC_T3 0x14 +#define MICROREAD_GATE_ID_MREAD_ISO_15_3 0x15 +#define MICROREAD_GATE_ID_MREAD_ISO_15_2 0x16 +#define MICROREAD_GATE_ID_MREAD_ISO_B_3 0x17 +#define MICROREAD_GATE_ID_MREAD_BPRIME 0x18 +#define MICROREAD_GATE_ID_MREAD_ISO_A_3 0x19 + +/* Card */ +#define MICROREAD_GATE_ID_MCARD_GEN 0x20 +#define MICROREAD_GATE_ID_MCARD_ISO_B 0x21 +#define MICROREAD_GATE_ID_MCARD_BPRIME 0x22 +#define MICROREAD_GATE_ID_MCARD_ISO_A 0x23 +#define MICROREAD_GATE_ID_MCARD_NFC_T3 0x24 +#define MICROREAD_GATE_ID_MCARD_ISO_15_3 0x25 +#define MICROREAD_GATE_ID_MCARD_ISO_15_2 0x26 +#define MICROREAD_GATE_ID_MCARD_ISO_B_2 0x27 +#define MICROREAD_GATE_ID_MCARD_ISO_CUSTOM 0x28 +#define MICROREAD_GATE_ID_SECURE_ELEMENT 0x2F + +/* P2P */ +#define MICROREAD_GATE_ID_P2P_GEN 0x30 +#define MICROREAD_GATE_ID_P2P_TARGET 0x31 +#define MICROREAD_PAR_P2P_TARGET_MODE 0x01 +#define MICROREAD_PAR_P2P_TARGET_GT 0x04 +#define MICROREAD_GATE_ID_P2P_INITIATOR 0x32 +#define MICROREAD_PAR_P2P_INITIATOR_GI 0x01 +#define MICROREAD_PAR_P2P_INITIATOR_GT 0x03 + +/* Those pipes are created/opened by default in the chip */ +#define MICROREAD_PIPE_ID_LMS 0x00 +#define MICROREAD_PIPE_ID_ADMIN 0x01 +#define MICROREAD_PIPE_ID_MGT 0x02 +#define MICROREAD_PIPE_ID_OS 0x03 +#define MICROREAD_PIPE_ID_HDS_LOOPBACK 0x04 +#define MICROREAD_PIPE_ID_HDS_IDT 0x05 +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B 0x08 +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_BPRIME 0x09 +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_A 0x0A +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_3 0x0B +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_2 0x0C +#define MICROREAD_PIPE_ID_HDS_MCARD_NFC_T3 0x0D +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B_2 0x0E +#define MICROREAD_PIPE_ID_HDS_MCARD_CUSTOM 0x0F +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B 0x10 +#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1 0x11 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A 0x12 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_3 0x13 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_2 0x14 +#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3 0x15 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B_3 0x16 +#define MICROREAD_PIPE_ID_HDS_MREAD_BPRIME 0x17 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3 0x18 +#define MICROREAD_PIPE_ID_HDS_MREAD_GEN 0x1B +#define MICROREAD_PIPE_ID_HDS_STACKED_ELEMENT 0x1C +#define MICROREAD_PIPE_ID_HDS_INSTANCES 0x1D +#define MICROREAD_PIPE_ID_HDS_TESTRF 0x1E +#define MICROREAD_PIPE_ID_HDS_P2P_TARGET 0x1F +#define MICROREAD_PIPE_ID_HDS_P2P_INITIATOR 0x20 + +/* Events */ +#define MICROREAD_EVT_MREAD_DISCOVERY_OCCURED NFC_HCI_EVT_TARGET_DISCOVERED +#define MICROREAD_EVT_MREAD_CARD_FOUND 0x3D +#define MICROREAD_EMCF_A_ATQA 0 +#define MICROREAD_EMCF_A_SAK 2 +#define MICROREAD_EMCF_A_LEN 3 +#define MICROREAD_EMCF_A_UID 4 +#define MICROREAD_EMCF_A3_ATQA 0 +#define MICROREAD_EMCF_A3_SAK 2 +#define MICROREAD_EMCF_A3_LEN 3 +#define MICROREAD_EMCF_A3_UID 4 +#define MICROREAD_EMCF_B_UID 0 +#define MICROREAD_EMCF_T1_ATQA 0 +#define MICROREAD_EMCF_T1_UID 4 +#define MICROREAD_EMCF_T3_UID 0 +#define MICROREAD_EVT_MREAD_DISCOVERY_START NFC_HCI_EVT_READER_REQUESTED +#define MICROREAD_EVT_MREAD_DISCOVERY_START_SOME 0x3E +#define MICROREAD_EVT_MREAD_DISCOVERY_STOP NFC_HCI_EVT_END_OPERATION +#define MICROREAD_EVT_MREAD_SIM_REQUESTS 0x3F +#define MICROREAD_EVT_MCARD_EXCHANGE NFC_HCI_EVT_TARGET_DISCOVERED +#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF 0x20 +#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF 0x21 +#define MICROREAD_EVT_MCARD_FIELD_ON 0x11 +#define MICROREAD_EVT_P2P_TARGET_ACTIVATED 0x13 +#define MICROREAD_EVT_P2P_TARGET_DEACTIVATED 0x12 +#define MICROREAD_EVT_MCARD_FIELD_OFF 0x14 + +/* Commands */ +#define MICROREAD_CMD_MREAD_EXCHANGE 0x10 +#define MICROREAD_CMD_MREAD_SUBSCRIBE 0x3F + +/* Hosts IDs */ +#define MICROREAD_ELT_ID_HDS NFC_HCI_TERMINAL_HOST_ID +#define MICROREAD_ELT_ID_SIM NFC_HCI_UICC_HOST_ID +#define MICROREAD_ELT_ID_SE1 0x03 +#define MICROREAD_ELT_ID_SE2 0x04 +#define MICROREAD_ELT_ID_SE3 0x05 + +static struct nfc_hci_gate microread_gates[] = { + {MICROREAD_GATE_ID_ADM, MICROREAD_PIPE_ID_ADMIN}, + {MICROREAD_GATE_ID_LOOPBACK, MICROREAD_PIPE_ID_HDS_LOOPBACK}, + {MICROREAD_GATE_ID_IDT, MICROREAD_PIPE_ID_HDS_IDT}, + {MICROREAD_GATE_ID_LMS, MICROREAD_PIPE_ID_LMS}, + {MICROREAD_GATE_ID_MREAD_ISO_B, MICROREAD_PIPE_ID_HDS_MREAD_ISO_B}, + {MICROREAD_GATE_ID_MREAD_ISO_A, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A}, + {MICROREAD_GATE_ID_MREAD_ISO_A_3, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3}, + {MICROREAD_GATE_ID_MGT, MICROREAD_PIPE_ID_MGT}, + {MICROREAD_GATE_ID_OS, MICROREAD_PIPE_ID_OS}, + {MICROREAD_GATE_ID_MREAD_NFC_T1, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1}, + {MICROREAD_GATE_ID_MREAD_NFC_T3, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3}, + {MICROREAD_GATE_ID_P2P_TARGET, MICROREAD_PIPE_ID_HDS_P2P_TARGET}, + {MICROREAD_GATE_ID_P2P_INITIATOR, MICROREAD_PIPE_ID_HDS_P2P_INITIATOR} +}; + +/* Largest headroom needed for outgoing custom commands */ +#define MICROREAD_CMDS_HEADROOM 2 +#define MICROREAD_CMD_TAILROOM 2 + +struct microread_info { + struct nfc_phy_ops *phy_ops; + void *phy_id; + + struct nfc_hci_dev *hdev; + + int async_cb_type; + data_exchange_cb_t async_cb; + void *async_cb_context; +}; + +static int microread_open(struct nfc_hci_dev *hdev) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + return info->phy_ops->enable(info->phy_id); +} + +static void microread_close(struct nfc_hci_dev *hdev) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + info->phy_ops->disable(info->phy_id); +} + +static int microread_hci_ready(struct nfc_hci_dev *hdev) +{ + int r; + u8 param[4]; + + param[0] = 0x03; + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A, + MICROREAD_CMD_MREAD_SUBSCRIBE, param, 1, NULL); + if (r) + return r; + + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A_3, + MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL); + if (r) + return r; + + param[0] = 0x00; + param[1] = 0x03; + param[2] = 0x00; + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_B, + MICROREAD_CMD_MREAD_SUBSCRIBE, param, 3, NULL); + if (r) + return r; + + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T1, + MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL); + if (r) + return r; + + param[0] = 0xFF; + param[1] = 0xFF; + param[2] = 0x00; + param[3] = 0x00; + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T3, + MICROREAD_CMD_MREAD_SUBSCRIBE, param, 4, NULL); + + return r; +} + +static int microread_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + return info->phy_ops->write(info->phy_id, skb); +} + +static int microread_start_poll(struct nfc_hci_dev *hdev, + u32 im_protocols, u32 tm_protocols) +{ + int r; + + u8 param[2]; + u8 mode; + + param[0] = 0x00; + param[1] = 0x00; + + if (im_protocols & NFC_PROTO_ISO14443_MASK) + param[0] |= (1 << 2); + + if (im_protocols & NFC_PROTO_ISO14443_B_MASK) + param[0] |= 1; + + if (im_protocols & NFC_PROTO_MIFARE_MASK) + param[1] |= 1; + + if (im_protocols & NFC_PROTO_JEWEL_MASK) + param[0] |= (1 << 1); + + if (im_protocols & NFC_PROTO_FELICA_MASK) + param[0] |= (1 << 5); + + if (im_protocols & NFC_PROTO_NFC_DEP_MASK) + param[1] |= (1 << 1); + + if ((im_protocols | tm_protocols) & NFC_PROTO_NFC_DEP_MASK) { + hdev->gb = nfc_get_local_general_bytes(hdev->ndev, + &hdev->gb_len); + if (hdev->gb == NULL || hdev->gb_len == 0) { + im_protocols &= ~NFC_PROTO_NFC_DEP_MASK; + tm_protocols &= ~NFC_PROTO_NFC_DEP_MASK; + } + } + + r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A, + MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0); + if (r) + return r; + + mode = 0xff; + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1); + if (r) + return r; + + if (im_protocols & NFC_PROTO_NFC_DEP_MASK) { + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_INITIATOR, + MICROREAD_PAR_P2P_INITIATOR_GI, + hdev->gb, hdev->gb_len); + if (r) + return r; + } + + if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) { + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_GT, + hdev->gb, hdev->gb_len); + if (r) + return r; + + mode = 0x02; + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1); + if (r) + return r; + } + + return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A, + MICROREAD_EVT_MREAD_DISCOVERY_START_SOME, + param, 2); +} + +static int microread_dep_link_up(struct nfc_hci_dev *hdev, + struct nfc_target *target, u8 comm_mode, + u8 *gb, size_t gb_len) +{ + struct sk_buff *rgb_skb = NULL; + int r; + + r = nfc_hci_get_param(hdev, target->hci_reader_gate, + MICROREAD_PAR_P2P_INITIATOR_GT, &rgb_skb); + if (r < 0) + return r; + + if (rgb_skb->len == 0 || rgb_skb->len > NFC_GB_MAXSIZE) { + r = -EPROTO; + goto exit; + } + + r = nfc_set_remote_general_bytes(hdev->ndev, rgb_skb->data, + rgb_skb->len); + if (r == 0) + r = nfc_dep_link_is_up(hdev->ndev, target->idx, comm_mode, + NFC_RF_INITIATOR); +exit: + kfree_skb(rgb_skb); + + return r; +} + +static int microread_dep_link_down(struct nfc_hci_dev *hdev) +{ + return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_INITIATOR, + MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0); +} + +static int microread_target_from_gate(struct nfc_hci_dev *hdev, u8 gate, + struct nfc_target *target) +{ + switch (gate) { + case MICROREAD_GATE_ID_P2P_INITIATOR: + target->supported_protocols = NFC_PROTO_NFC_DEP_MASK; + break; + default: + return -EPROTO; + } + + return 0; +} + +static int microread_complete_target_discovered(struct nfc_hci_dev *hdev, + u8 gate, + struct nfc_target *target) +{ + return 0; +} + +#define MICROREAD_CB_TYPE_READER_ALL 1 + +static void microread_im_transceive_cb(void *context, struct sk_buff *skb, + int err) +{ + struct microread_info *info = context; + + switch (info->async_cb_type) { + case MICROREAD_CB_TYPE_READER_ALL: + if (err == 0) { + if (skb->len == 0) { + err = -EPROTO; + kfree_skb(skb); + info->async_cb(info->async_cb_context, NULL, + -EPROTO); + return; + } + + if (skb->data[skb->len - 1] != 0) { + err = nfc_hci_result_to_errno( + skb->data[skb->len - 1]); + kfree_skb(skb); + info->async_cb(info->async_cb_context, NULL, + err); + return; + } + + skb_trim(skb, skb->len - 1); /* RF Error ind. */ + } + info->async_cb(info->async_cb_context, skb, err); + break; + default: + if (err == 0) + kfree_skb(skb); + break; + } +} + +/* + * Returns: + * <= 0: driver handled the data exchange + * 1: driver doesn't especially handle, please do standard processing + */ +static int microread_im_transceive(struct nfc_hci_dev *hdev, + struct nfc_target *target, + struct sk_buff *skb, data_exchange_cb_t cb, + void *cb_context) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + u8 control_bits; + u16 crc; + + pr_info("data exchange to gate 0x%x\n", target->hci_reader_gate); + + if (target->hci_reader_gate == MICROREAD_GATE_ID_P2P_INITIATOR) { + *skb_push(skb, 1) = 0; + + return nfc_hci_send_event(hdev, target->hci_reader_gate, + MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF, + skb->data, skb->len); + } + + switch (target->hci_reader_gate) { + case MICROREAD_GATE_ID_MREAD_ISO_A: + control_bits = 0xCB; + break; + case MICROREAD_GATE_ID_MREAD_ISO_A_3: + control_bits = 0xCB; + break; + case MICROREAD_GATE_ID_MREAD_ISO_B: + control_bits = 0xCB; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T1: + control_bits = 0x1B; + + crc = crc_ccitt(0xffff, skb->data, skb->len); + crc = ~crc; + *skb_put(skb, 1) = crc & 0xff; + *skb_put(skb, 1) = crc >> 8; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T3: + control_bits = 0xDB; + break; + default: + pr_info("Abort im_transceive to invalid gate 0x%x\n", + target->hci_reader_gate); + return 1; + } + + *skb_push(skb, 1) = control_bits; + + info->async_cb_type = MICROREAD_CB_TYPE_READER_ALL; + info->async_cb = cb; + info->async_cb_context = cb_context; + + return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate, + MICROREAD_CMD_MREAD_EXCHANGE, + skb->data, skb->len, + microread_im_transceive_cb, info); +} + +static int microread_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + int r; + + r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_EVT_MCARD_EXCHANGE, + skb->data, skb->len); + + kfree_skb(skb); + + return r; +} + +static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate, + struct sk_buff *skb) +{ + struct nfc_target *targets; + int r = 0; + + pr_info("target discovered to gate 0x%x\n", gate); + + targets = kzalloc(sizeof(struct nfc_target), GFP_KERNEL); + if (targets == NULL) { + r = -ENOMEM; + goto exit; + } + + targets->hci_reader_gate = gate; + + switch (gate) { + case MICROREAD_GATE_ID_MREAD_ISO_A: + targets->supported_protocols = + nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A_SAK]); + targets->sens_res = + be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A_ATQA]); + targets->sel_res = skb->data[MICROREAD_EMCF_A_SAK]; + targets->nfcid1_len = skb->data[MICROREAD_EMCF_A_LEN]; + if (targets->nfcid1_len > sizeof(targets->nfcid1)) { + r = -EINVAL; + goto exit_free; + } + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID], + targets->nfcid1_len); + break; + case MICROREAD_GATE_ID_MREAD_ISO_A_3: + targets->supported_protocols = + nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A3_SAK]); + targets->sens_res = + be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A3_ATQA]); + targets->sel_res = skb->data[MICROREAD_EMCF_A3_SAK]; + targets->nfcid1_len = skb->data[MICROREAD_EMCF_A3_LEN]; + if (targets->nfcid1_len > sizeof(targets->nfcid1)) { + r = -EINVAL; + goto exit_free; + } + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID], + targets->nfcid1_len); + break; + case MICROREAD_GATE_ID_MREAD_ISO_B: + targets->supported_protocols = NFC_PROTO_ISO14443_B_MASK; + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_B_UID], 4); + targets->nfcid1_len = 4; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T1: + targets->supported_protocols = NFC_PROTO_JEWEL_MASK; + targets->sens_res = + le16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_T1_ATQA]); + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T1_UID], 4); + targets->nfcid1_len = 4; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T3: + targets->supported_protocols = NFC_PROTO_FELICA_MASK; + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T3_UID], 8); + targets->nfcid1_len = 8; + break; + default: + pr_info("discard target discovered to gate 0x%x\n", gate); + goto exit_free; + } + + r = nfc_targets_found(hdev->ndev, targets, 1); + +exit_free: + kfree(targets); + +exit: + kfree_skb(skb); + + if (r) + pr_err("Failed to handle discovered target err=%d\n", r); +} + +static int microread_event_received(struct nfc_hci_dev *hdev, u8 pipe, + u8 event, struct sk_buff *skb) +{ + int r; + u8 gate = hdev->pipes[pipe].gate; + u8 mode; + + pr_info("Microread received event 0x%x to gate 0x%x\n", event, gate); + + switch (event) { + case MICROREAD_EVT_MREAD_CARD_FOUND: + microread_target_discovered(hdev, gate, skb); + return 0; + + case MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF: + if (skb->len < 1) { + kfree_skb(skb); + return -EPROTO; + } + + if (skb->data[skb->len - 1]) { + kfree_skb(skb); + return -EIO; + } + + skb_trim(skb, skb->len - 1); + + r = nfc_tm_data_received(hdev->ndev, skb); + break; + + case MICROREAD_EVT_MCARD_FIELD_ON: + case MICROREAD_EVT_MCARD_FIELD_OFF: + kfree_skb(skb); + return 0; + + case MICROREAD_EVT_P2P_TARGET_ACTIVATED: + r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK, + NFC_COMM_PASSIVE, skb->data, + skb->len); + + kfree_skb(skb); + break; + + case MICROREAD_EVT_MCARD_EXCHANGE: + if (skb->len < 1) { + kfree_skb(skb); + return -EPROTO; + } + + if (skb->data[skb->len-1]) { + kfree_skb(skb); + return -EIO; + } + + skb_trim(skb, skb->len - 1); + + r = nfc_tm_data_received(hdev->ndev, skb); + break; + + case MICROREAD_EVT_P2P_TARGET_DEACTIVATED: + kfree_skb(skb); + + mode = 0xff; + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1); + if (r) + break; + + r = nfc_hci_send_event(hdev, gate, + MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, + 0); + break; + + default: + return 1; + } + + return r; +} + +static struct nfc_hci_ops microread_hci_ops = { + .open = microread_open, + .close = microread_close, + .hci_ready = microread_hci_ready, + .xmit = microread_xmit, + .start_poll = microread_start_poll, + .dep_link_up = microread_dep_link_up, + .dep_link_down = microread_dep_link_down, + .target_from_gate = microread_target_from_gate, + .complete_target_discovered = microread_complete_target_discovered, + .im_transceive = microread_im_transceive, + .tm_send = microread_tm_send, + .check_presence = NULL, + .event_received = microread_event_received, +}; + +int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, + int phy_headroom, int phy_tailroom, int phy_payload, + struct nfc_hci_dev **hdev) +{ + struct microread_info *info; + unsigned long quirks = 0; + u32 protocols; + struct nfc_hci_init_data init_data; + int r; + + info = kzalloc(sizeof(struct microread_info), GFP_KERNEL); + if (!info) { + r = -ENOMEM; + goto err_info_alloc; + } + + info->phy_ops = phy_ops; + info->phy_id = phy_id; + + init_data.gate_count = ARRAY_SIZE(microread_gates); + memcpy(init_data.gates, microread_gates, sizeof(microread_gates)); + + strcpy(init_data.session_id, "MICROREA"); + + set_bit(NFC_HCI_QUIRK_SHORT_CLEAR, &quirks); + + protocols = NFC_PROTO_JEWEL_MASK | + NFC_PROTO_MIFARE_MASK | + NFC_PROTO_FELICA_MASK | + NFC_PROTO_ISO14443_MASK | + NFC_PROTO_ISO14443_B_MASK | + NFC_PROTO_NFC_DEP_MASK; + + info->hdev = nfc_hci_allocate_device(µread_hci_ops, &init_data, + quirks, protocols, llc_name, + phy_headroom + + MICROREAD_CMDS_HEADROOM, + phy_tailroom + + MICROREAD_CMD_TAILROOM, + phy_payload); + if (!info->hdev) { + pr_err("Cannot allocate nfc hdev\n"); + r = -ENOMEM; + goto err_alloc_hdev; + } + + nfc_hci_set_clientdata(info->hdev, info); + + r = nfc_hci_register_device(info->hdev); + if (r) + goto err_regdev; + + *hdev = info->hdev; + + return 0; + +err_regdev: + nfc_hci_free_device(info->hdev); + +err_alloc_hdev: + kfree(info); + +err_info_alloc: + return r; +} +EXPORT_SYMBOL(microread_probe); + +void microread_remove(struct nfc_hci_dev *hdev) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + nfc_hci_unregister_device(hdev); + nfc_hci_free_device(hdev); + kfree(info); +} +EXPORT_SYMBOL(microread_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/microread/microread.h b/drivers/nfc/microread/microread.h new file mode 100644 index 0000000..f538641 --- /dev/null +++ b/drivers/nfc/microread/microread.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2011 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LOCAL_MICROREAD_H_ +#define __LOCAL_MICROREAD_H_ + +#include <net/nfc/hci.h> + +#define DRIVER_DESC "NFC driver for microread" + +int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, + int phy_headroom, int phy_tailroom, int phy_payload, + struct nfc_hci_dev **hdev); + +void microread_remove(struct nfc_hci_dev *hdev); + +#endif /* __LOCAL_MICROREAD_H_ */ diff --git a/drivers/nfc/nfcmrvl/Kconfig b/drivers/nfc/nfcmrvl/Kconfig new file mode 100644 index 0000000..b40533f --- /dev/null +++ b/drivers/nfc/nfcmrvl/Kconfig @@ -0,0 +1,62 @@ +config NFC_MRVL + depends on !KERNEL_3_3 + tristate + depends on m + help + The core driver to support Marvell NFC devices. + + This driver is required if you want to support + Marvell NFC device 8897. + +config NFC_MRVL_USB + depends on !KERNEL_3_3 + tristate "Marvell NFC-over-USB driver" + depends on m + depends on NFC_NCI && USB + select NFC_MRVL + help + Marvell NFC-over-USB driver. + + This driver provides support for Marvell NFC-over-USB devices: + 8897. + + Say Y here to compile support for Marvell NFC-over-USB driver + into the kernel or say M to compile it as module. + +config NFC_MRVL_UART + depends on !KERNEL_3_3 + tristate "Marvell NFC-over-UART driver" + depends on m + depends on NFC_NCI && NFC_NCI_UART + select NFC_MRVL + help + Marvell NFC-over-UART driver. + + This driver provides support for Marvell NFC-over-UART devices + + Say Y here to compile support for Marvell NFC-over-UART driver + into the kernel or say M to compile it as module. + +config NFC_MRVL_I2C + tristate "Marvell NFC-over-I2C driver" + depends on m + depends on NFC_MRVL && I2C + help + Marvell NFC-over-I2C driver. + + This driver provides support for Marvell NFC-over-I2C devices. + + Say Y here to compile support for Marvell NFC-over-I2C driver + into the kernel or say M to compile it as module. + +config NFC_MRVL_SPI + tristate "Marvell NFC-over-SPI driver" + depends on m + depends on NFC_MRVL && NFC_NCI_SPI + help + Marvell NFC-over-SPI driver. + + This driver provides support for Marvell NFC-over-SPI devices. + + Say Y here to compile support for Marvell NFC-over-SPI driver + into the kernel or say M to compile it as module. diff --git a/drivers/nfc/nfcmrvl/Makefile b/drivers/nfc/nfcmrvl/Makefile new file mode 100644 index 0000000..f503220 --- /dev/null +++ b/drivers/nfc/nfcmrvl/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for NFCMRVL NCI based NFC driver +# + +nfcmrvl-y += main.o fw_dnld.o +obj-$(CPTCFG_NFC_MRVL) += nfcmrvl.o + +nfcmrvl_usb-y += usb.o +obj-$(CPTCFG_NFC_MRVL_USB) += nfcmrvl_usb.o + +nfcmrvl_uart-y += uart.o +obj-$(CPTCFG_NFC_MRVL_UART) += nfcmrvl_uart.o + +nfcmrvl_i2c-y += i2c.o +obj-$(CPTCFG_NFC_MRVL_I2C) += nfcmrvl_i2c.o + +nfcmrvl_spi-y += spi.o +obj-$(CPTCFG_NFC_MRVL_SPI) += nfcmrvl_spi.o diff --git a/drivers/nfc/nfcmrvl/fw_dnld.c b/drivers/nfc/nfcmrvl/fw_dnld.c new file mode 100644 index 0000000..f8dcdf4 --- /dev/null +++ b/drivers/nfc/nfcmrvl/fw_dnld.c @@ -0,0 +1,559 @@ +/* + * Marvell NFC driver: Firmware downloader + * + * Copyright (C) 2015, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available on the worldwide web at + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include <linux/module.h> +#include <linux/unaligned/access_ok.h> +#include <linux/firmware.h> +#include <linux/nfc.h> +#include <net/nfc/nci.h> +#include <net/nfc/nci_core.h> +#include "nfcmrvl.h" + +#define FW_DNLD_TIMEOUT 15000 + +#define NCI_OP_PROPRIETARY_BOOT_CMD nci_opcode_pack(NCI_GID_PROPRIETARY, \ + NCI_OP_PROP_BOOT_CMD) + +/* FW download states */ + +enum { + STATE_RESET = 0, + STATE_INIT, + STATE_SET_REF_CLOCK, + STATE_SET_HI_CONFIG, + STATE_OPEN_LC, + STATE_FW_DNLD, + STATE_CLOSE_LC, + STATE_BOOT +}; + +enum { + SUBSTATE_WAIT_COMMAND = 0, + SUBSTATE_WAIT_ACK_CREDIT, + SUBSTATE_WAIT_NACK_CREDIT, + SUBSTATE_WAIT_DATA_CREDIT, +}; + +/* +** Patterns for responses +*/ + +static const uint8_t nci_pattern_core_reset_ntf[] = { + 0x60, 0x00, 0x02, 0xA0, 0x01 +}; + +static const uint8_t nci_pattern_core_init_rsp[] = { + 0x40, 0x01, 0x11 +}; + +static const uint8_t nci_pattern_core_set_config_rsp[] = { + 0x40, 0x02, 0x02, 0x00, 0x00 +}; + +static const uint8_t nci_pattern_core_conn_create_rsp[] = { + 0x40, 0x04, 0x04, 0x00 +}; + +static const uint8_t nci_pattern_core_conn_close_rsp[] = { + 0x40, 0x05, 0x01, 0x00 +}; + +static const uint8_t nci_pattern_core_conn_credits_ntf[] = { + 0x60, 0x06, 0x03, 0x01, NCI_CORE_LC_CONNID_PROP_FW_DL, 0x01 +}; + +static const uint8_t nci_pattern_proprietary_boot_rsp[] = { + 0x4F, 0x3A, 0x01, 0x00 +}; + +static struct sk_buff *alloc_lc_skb(struct nfcmrvl_private *priv, uint8_t plen) +{ + struct sk_buff *skb; + struct nci_data_hdr *hdr; + + skb = nci_skb_alloc(priv->ndev, (NCI_DATA_HDR_SIZE + plen), GFP_KERNEL); + if (!skb) { + pr_err("no memory for data\n"); + return NULL; + } + + hdr = (struct nci_data_hdr *) skb_put(skb, NCI_DATA_HDR_SIZE); + hdr->conn_id = NCI_CORE_LC_CONNID_PROP_FW_DL; + hdr->rfu = 0; + hdr->plen = plen; + + nci_mt_set((__u8 *)hdr, NCI_MT_DATA_PKT); + nci_pbf_set((__u8 *)hdr, NCI_PBF_LAST); + + return skb; +} + +static void fw_dnld_over(struct nfcmrvl_private *priv, u32 error) +{ + if (priv->fw_dnld.fw) { + release_firmware(priv->fw_dnld.fw); + priv->fw_dnld.fw = NULL; + priv->fw_dnld.header = NULL; + priv->fw_dnld.binary_config = NULL; + } + + atomic_set(&priv->ndev->cmd_cnt, 0); + + if (timer_pending(&priv->ndev->cmd_timer)) + del_timer_sync(&priv->ndev->cmd_timer); + + if (timer_pending(&priv->fw_dnld.timer)) + del_timer_sync(&priv->fw_dnld.timer); + + nfc_info(priv->dev, "FW loading over (%d)]\n", error); + + if (error != 0) { + /* failed, halt the chip to avoid power consumption */ + nfcmrvl_chip_halt(priv); + } + + nfc_fw_download_done(priv->ndev->nfc_dev, priv->fw_dnld.name, error); +} + +static void fw_dnld_timeout(unsigned long arg) +{ + struct nfcmrvl_private *priv = (struct nfcmrvl_private *) arg; + + nfc_err(priv->dev, "FW loading timeout"); + priv->fw_dnld.state = STATE_RESET; + fw_dnld_over(priv, -ETIMEDOUT); +} + +static int process_state_reset(struct nfcmrvl_private *priv, + struct sk_buff *skb) +{ + if (sizeof(nci_pattern_core_reset_ntf) != skb->len || + memcmp(skb->data, nci_pattern_core_reset_ntf, + sizeof(nci_pattern_core_reset_ntf))) + return -EINVAL; + + nfc_info(priv->dev, "BootROM reset, start fw download\n"); + + /* Start FW download state machine */ + priv->fw_dnld.state = STATE_INIT; + nci_send_cmd(priv->ndev, NCI_OP_CORE_INIT_CMD, 0, NULL); + + return 0; +} + +static int process_state_init(struct nfcmrvl_private *priv, struct sk_buff *skb) +{ + struct nci_core_set_config_cmd cmd; + + if (sizeof(nci_pattern_core_init_rsp) >= skb->len || + memcmp(skb->data, nci_pattern_core_init_rsp, + sizeof(nci_pattern_core_init_rsp))) + return -EINVAL; + + cmd.num_params = 1; + cmd.param.id = NFCMRVL_PROP_REF_CLOCK; + cmd.param.len = 4; + memcpy(cmd.param.val, &priv->fw_dnld.header->ref_clock, 4); + + nci_send_cmd(priv->ndev, NCI_OP_CORE_SET_CONFIG_CMD, 3 + cmd.param.len, + &cmd); + + priv->fw_dnld.state = STATE_SET_REF_CLOCK; + return 0; +} + +static void create_lc(struct nfcmrvl_private *priv) +{ + uint8_t param[2] = { NCI_CORE_LC_PROP_FW_DL, 0x0 }; + + priv->fw_dnld.state = STATE_OPEN_LC; + nci_send_cmd(priv->ndev, NCI_OP_CORE_CONN_CREATE_CMD, 2, param); +} + +static int process_state_set_ref_clock(struct nfcmrvl_private *priv, + struct sk_buff *skb) +{ + struct nci_core_set_config_cmd cmd; + + if (sizeof(nci_pattern_core_set_config_rsp) != skb->len || + memcmp(skb->data, nci_pattern_core_set_config_rsp, skb->len)) + return -EINVAL; + + cmd.num_params = 1; + cmd.param.id = NFCMRVL_PROP_SET_HI_CONFIG; + + switch (priv->phy) { + case NFCMRVL_PHY_UART: + cmd.param.len = 5; + memcpy(cmd.param.val, + &priv->fw_dnld.binary_config->uart.baudrate, + 4); + cmd.param.val[4] = + priv->fw_dnld.binary_config->uart.flow_control; + break; + case NFCMRVL_PHY_I2C: + cmd.param.len = 5; + memcpy(cmd.param.val, + &priv->fw_dnld.binary_config->i2c.clk, + 4); + cmd.param.val[4] = 0; + break; + case NFCMRVL_PHY_SPI: + cmd.param.len = 5; + memcpy(cmd.param.val, + &priv->fw_dnld.binary_config->spi.clk, + 4); + cmd.param.val[4] = 0; + break; + default: + create_lc(priv); + return 0; + } + + priv->fw_dnld.state = STATE_SET_HI_CONFIG; + nci_send_cmd(priv->ndev, NCI_OP_CORE_SET_CONFIG_CMD, 3 + cmd.param.len, + &cmd); + return 0; +} + +static int process_state_set_hi_config(struct nfcmrvl_private *priv, + struct sk_buff *skb) +{ + if (sizeof(nci_pattern_core_set_config_rsp) != skb->len || + memcmp(skb->data, nci_pattern_core_set_config_rsp, skb->len)) + return -EINVAL; + + create_lc(priv); + return 0; +} + +static int process_state_open_lc(struct nfcmrvl_private *priv, + struct sk_buff *skb) +{ + if (sizeof(nci_pattern_core_conn_create_rsp) >= skb->len || + memcmp(skb->data, nci_pattern_core_conn_create_rsp, + sizeof(nci_pattern_core_conn_create_rsp))) + return -EINVAL; + + priv->fw_dnld.state = STATE_FW_DNLD; + priv->fw_dnld.substate = SUBSTATE_WAIT_COMMAND; + priv->fw_dnld.offset = priv->fw_dnld.binary_config->offset; + return 0; +} + +static int process_state_fw_dnld(struct nfcmrvl_private *priv, + struct sk_buff *skb) +{ + uint16_t len; + uint16_t comp_len; + struct sk_buff *out_skb; + + switch (priv->fw_dnld.substate) { + case SUBSTATE_WAIT_COMMAND: + /* + * Command format: + * B0..2: NCI header + * B3 : Helper command (0xA5) + * B4..5: le16 data size + * B6..7: le16 data size complement (~) + * B8..N: payload + */ + + /* Remove NCI HDR */ + skb_pull(skb, 3); + if (skb->data[0] != HELPER_CMD_PACKET_FORMAT || skb->len != 5) { + nfc_err(priv->dev, "bad command"); + return -EINVAL; + } + skb_pull(skb, 1); + memcpy(&len, skb->data, 2); + skb_pull(skb, 2); + memcpy(&comp_len, skb->data, 2); + skb_pull(skb, 2); + len = get_unaligned_le16(&len); + comp_len = get_unaligned_le16(&comp_len); + if (((~len) & 0xFFFF) != comp_len) { + nfc_err(priv->dev, "bad len complement: %x %x %x", + len, comp_len, (~len & 0xFFFF)); + out_skb = alloc_lc_skb(priv, 1); + if (!out_skb) + return -ENOMEM; + *skb_put(out_skb, 1) = 0xBF; + nci_send_frame(priv->ndev, out_skb); + priv->fw_dnld.substate = SUBSTATE_WAIT_NACK_CREDIT; + return 0; + } + priv->fw_dnld.chunk_len = len; + out_skb = alloc_lc_skb(priv, 1); + if (!out_skb) + return -ENOMEM; + *skb_put(out_skb, 1) = HELPER_ACK_PACKET_FORMAT; + nci_send_frame(priv->ndev, out_skb); + priv->fw_dnld.substate = SUBSTATE_WAIT_ACK_CREDIT; + break; + + case SUBSTATE_WAIT_ACK_CREDIT: + if (sizeof(nci_pattern_core_conn_credits_ntf) != skb->len || + memcmp(nci_pattern_core_conn_credits_ntf, skb->data, + skb->len)) { + nfc_err(priv->dev, "bad packet: waiting for credit"); + return -EINVAL; + } + if (priv->fw_dnld.chunk_len == 0) { + /* FW Loading is done */ + uint8_t conn_id = NCI_CORE_LC_CONNID_PROP_FW_DL; + + priv->fw_dnld.state = STATE_CLOSE_LC; + nci_send_cmd(priv->ndev, NCI_OP_CORE_CONN_CLOSE_CMD, + 1, &conn_id); + } else { + out_skb = alloc_lc_skb(priv, priv->fw_dnld.chunk_len); + if (!out_skb) + return -ENOMEM; + memcpy(skb_put(out_skb, priv->fw_dnld.chunk_len), + ((uint8_t *)priv->fw_dnld.fw->data) + + priv->fw_dnld.offset, + priv->fw_dnld.chunk_len); + nci_send_frame(priv->ndev, out_skb); + priv->fw_dnld.substate = SUBSTATE_WAIT_DATA_CREDIT; + } + break; + + case SUBSTATE_WAIT_DATA_CREDIT: + if (sizeof(nci_pattern_core_conn_credits_ntf) != skb->len || + memcmp(nci_pattern_core_conn_credits_ntf, skb->data, + skb->len)) { + nfc_err(priv->dev, "bad packet: waiting for credit"); + return -EINVAL; + } + priv->fw_dnld.offset += priv->fw_dnld.chunk_len; + priv->fw_dnld.chunk_len = 0; + priv->fw_dnld.substate = SUBSTATE_WAIT_COMMAND; + break; + + case SUBSTATE_WAIT_NACK_CREDIT: + if (sizeof(nci_pattern_core_conn_credits_ntf) != skb->len || + memcmp(nci_pattern_core_conn_credits_ntf, skb->data, + skb->len)) { + nfc_err(priv->dev, "bad packet: waiting for credit"); + return -EINVAL; + } + priv->fw_dnld.substate = SUBSTATE_WAIT_COMMAND; + break; + } + return 0; +} + +static int process_state_close_lc(struct nfcmrvl_private *priv, + struct sk_buff *skb) +{ + if (sizeof(nci_pattern_core_conn_close_rsp) != skb->len || + memcmp(skb->data, nci_pattern_core_conn_close_rsp, skb->len)) + return -EINVAL; + + priv->fw_dnld.state = STATE_BOOT; + nci_send_cmd(priv->ndev, NCI_OP_PROPRIETARY_BOOT_CMD, 0, NULL); + return 0; +} + +static int process_state_boot(struct nfcmrvl_private *priv, struct sk_buff *skb) +{ + if (sizeof(nci_pattern_proprietary_boot_rsp) != skb->len || + memcmp(skb->data, nci_pattern_proprietary_boot_rsp, skb->len)) + return -EINVAL; + + /* + * Update HI config to use the right configuration for the next + * data exchanges. + */ + priv->if_ops->nci_update_config(priv, + &priv->fw_dnld.binary_config->config); + + if (priv->fw_dnld.binary_config == &priv->fw_dnld.header->helper) { + /* + * This is the case where an helper was needed and we have + * uploaded it. Now we have to wait the next RESET NTF to start + * FW download. + */ + priv->fw_dnld.state = STATE_RESET; + priv->fw_dnld.binary_config = &priv->fw_dnld.header->firmware; + nfc_info(priv->dev, "FW loading: helper loaded"); + } else { + nfc_info(priv->dev, "FW loading: firmware loaded"); + fw_dnld_over(priv, 0); + } + return 0; +} + +static void fw_dnld_rx_work(struct work_struct *work) +{ + int ret; + struct sk_buff *skb; + struct nfcmrvl_fw_dnld *fw_dnld = container_of(work, + struct nfcmrvl_fw_dnld, + rx_work); + struct nfcmrvl_private *priv = container_of(fw_dnld, + struct nfcmrvl_private, + fw_dnld); + + while ((skb = skb_dequeue(&fw_dnld->rx_q))) { + nfc_send_to_raw_sock(priv->ndev->nfc_dev, skb, + RAW_PAYLOAD_NCI, NFC_DIRECTION_RX); + switch (fw_dnld->state) { + case STATE_RESET: + ret = process_state_reset(priv, skb); + break; + case STATE_INIT: + ret = process_state_init(priv, skb); + break; + case STATE_SET_REF_CLOCK: + ret = process_state_set_ref_clock(priv, skb); + break; + case STATE_SET_HI_CONFIG: + ret = process_state_set_hi_config(priv, skb); + break; + case STATE_OPEN_LC: + ret = process_state_open_lc(priv, skb); + break; + case STATE_FW_DNLD: + ret = process_state_fw_dnld(priv, skb); + break; + case STATE_CLOSE_LC: + ret = process_state_close_lc(priv, skb); + break; + case STATE_BOOT: + ret = process_state_boot(priv, skb); + break; + default: + ret = -EFAULT; + } + + kfree_skb(skb); + + if (ret != 0) { + nfc_err(priv->dev, "FW loading error"); + fw_dnld_over(priv, ret); + break; + } + } +} + +int nfcmrvl_fw_dnld_init(struct nfcmrvl_private *priv) +{ + char name[32]; + + INIT_WORK(&priv->fw_dnld.rx_work, fw_dnld_rx_work); + snprintf(name, sizeof(name), "%s_nfcmrvl_fw_dnld_rx_wq", + dev_name(priv->dev)); + priv->fw_dnld.rx_wq = create_singlethread_workqueue(name); + if (!priv->fw_dnld.rx_wq) + return -ENOMEM; + skb_queue_head_init(&priv->fw_dnld.rx_q); + return 0; +} + +void nfcmrvl_fw_dnld_deinit(struct nfcmrvl_private *priv) +{ + destroy_workqueue(priv->fw_dnld.rx_wq); +} + +void nfcmrvl_fw_dnld_recv_frame(struct nfcmrvl_private *priv, + struct sk_buff *skb) +{ + /* Discard command timer */ + if (timer_pending(&priv->ndev->cmd_timer)) + del_timer_sync(&priv->ndev->cmd_timer); + + /* Allow next command */ + atomic_set(&priv->ndev->cmd_cnt, 1); + + /* Queue and trigger rx work */ + skb_queue_tail(&priv->fw_dnld.rx_q, skb); + queue_work(priv->fw_dnld.rx_wq, &priv->fw_dnld.rx_work); +} + +void nfcmrvl_fw_dnld_abort(struct nfcmrvl_private *priv) +{ + fw_dnld_over(priv, -EHOSTDOWN); +} + +int nfcmrvl_fw_dnld_start(struct nci_dev *ndev, const char *firmware_name) +{ + struct nfcmrvl_private *priv = nci_get_drvdata(ndev); + struct nfcmrvl_fw_dnld *fw_dnld = &priv->fw_dnld; + + if (!priv->support_fw_dnld) + return -ENOTSUPP; + + if (!firmware_name || !firmware_name[0]) + return -EINVAL; + + strcpy(fw_dnld->name, firmware_name); + + /* + * Retrieve FW binary file and parse it to initialize FW download + * state machine. + */ + + /* Retrieve FW binary */ + if (request_firmware(&fw_dnld->fw, firmware_name, priv->dev) < 0) { + nfc_err(priv->dev, "failed to retrieve FW %s", firmware_name); + return -ENOENT; + } + + fw_dnld->header = (const struct nfcmrvl_fw *) priv->fw_dnld.fw->data; + + if (fw_dnld->header->magic != NFCMRVL_FW_MAGIC || + fw_dnld->header->phy != priv->phy) { + nfc_err(priv->dev, "bad firmware binary %s magic=0x%x phy=%d", + firmware_name, fw_dnld->header->magic, + fw_dnld->header->phy); + release_firmware(fw_dnld->fw); + fw_dnld->header = NULL; + return -EINVAL; + } + + if (fw_dnld->header->helper.offset != 0) { + nfc_info(priv->dev, "loading helper"); + fw_dnld->binary_config = &fw_dnld->header->helper; + } else { + nfc_info(priv->dev, "loading firmware"); + fw_dnld->binary_config = &fw_dnld->header->firmware; + } + + /* Configure a timer for timeout */ + setup_timer(&priv->fw_dnld.timer, fw_dnld_timeout, + (unsigned long) priv); + mod_timer(&priv->fw_dnld.timer, + jiffies + msecs_to_jiffies(FW_DNLD_TIMEOUT)); + + /* Ronfigure HI to be sure that it is the bootrom values */ + priv->if_ops->nci_update_config(priv, + &fw_dnld->header->bootrom.config); + + /* Allow first command */ + atomic_set(&priv->ndev->cmd_cnt, 1); + + /* First, reset the chip */ + priv->fw_dnld.state = STATE_RESET; + nfcmrvl_chip_reset(priv); + + /* Now wait for CORE_RESET_NTF or timeout */ + + return 0; +} diff --git a/drivers/nfc/nfcmrvl/fw_dnld.h b/drivers/nfc/nfcmrvl/fw_dnld.h new file mode 100644 index 0000000..ee4a339 --- /dev/null +++ b/drivers/nfc/nfcmrvl/fw_dnld.h @@ -0,0 +1,98 @@ +/** + * Marvell NFC driver: Firmware downloader + * + * Copyright (C) 2015, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available on the worldwide web at + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + **/ + +#ifndef __NFCMRVL_FW_DNLD_H__ +#define __NFCMRVL_FW_DNLD_H__ + +#include <linux/workqueue.h> + +#define NFCMRVL_FW_MAGIC 0x88888888 + +#define NCI_OP_PROP_BOOT_CMD 0x3A + +#define NCI_CORE_LC_PROP_FW_DL 0xFD +#define NCI_CORE_LC_CONNID_PROP_FW_DL 0x02 + +#define HELPER_CMD_ENTRY_POINT 0x04 +#define HELPER_CMD_PACKET_FORMAT 0xA5 +#define HELPER_ACK_PACKET_FORMAT 0x5A +#define HELPER_RETRY_REQUESTED (1 << 15) + +struct nfcmrvl_private; + +struct nfcmrvl_fw_uart_config { + uint8_t flow_control; + uint32_t baudrate; +} __packed; + +struct nfcmrvl_fw_i2c_config { + uint32_t clk; +} __packed; + +struct nfcmrvl_fw_spi_config { + uint32_t clk; +} __packed; + +struct nfcmrvl_fw_binary_config { + uint32_t offset; + union { + void *config; + struct nfcmrvl_fw_uart_config uart; + struct nfcmrvl_fw_i2c_config i2c; + struct nfcmrvl_fw_spi_config spi; + uint8_t reserved[64]; + }; +} __packed; + +struct nfcmrvl_fw { + uint32_t magic; + uint32_t ref_clock; + uint32_t phy; + struct nfcmrvl_fw_binary_config bootrom; + struct nfcmrvl_fw_binary_config helper; + struct nfcmrvl_fw_binary_config firmware; + uint8_t reserved[64]; +} __packed; + +struct nfcmrvl_fw_dnld { + char name[NFC_FIRMWARE_NAME_MAXSIZE + 1]; + const struct firmware *fw; + + const struct nfcmrvl_fw *header; + const struct nfcmrvl_fw_binary_config *binary_config; + + int state; + int substate; + int offset; + int chunk_len; + + struct workqueue_struct *rx_wq; + struct work_struct rx_work; + struct sk_buff_head rx_q; + + struct timer_list timer; +}; + +int nfcmrvl_fw_dnld_init(struct nfcmrvl_private *priv); +void nfcmrvl_fw_dnld_deinit(struct nfcmrvl_private *priv); +void nfcmrvl_fw_dnld_abort(struct nfcmrvl_private *priv); +int nfcmrvl_fw_dnld_start(struct nci_dev *ndev, const char *firmware_name); +void nfcmrvl_fw_dnld_recv_frame(struct nfcmrvl_private *priv, + struct sk_buff *skb); + +#endif diff --git a/drivers/nfc/nfcmrvl/i2c.c b/drivers/nfc/nfcmrvl/i2c.c new file mode 100644 index 0000000..78b7aa8 --- /dev/null +++ b/drivers/nfc/nfcmrvl/i2c.c @@ -0,0 +1,290 @@ +/** + * Marvell NFC-over-I2C driver: I2C interface related functions + * + * Copyright (C) 2015, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available on the worldwide web at + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + **/ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/pm_runtime.h> +#include <linux/nfc.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <net/nfc/nci.h> +#include <net/nfc/nci_core.h> +#include "nfcmrvl.h" + +struct nfcmrvl_i2c_drv_data { + unsigned long flags; + struct device *dev; + struct i2c_client *i2c; + struct nfcmrvl_private *priv; +}; + +static int nfcmrvl_i2c_read(struct nfcmrvl_i2c_drv_data *drv_data, + struct sk_buff **skb) +{ + int ret; + struct nci_ctrl_hdr nci_hdr; + + /* Read NCI header to know the payload size */ + ret = i2c_master_recv(drv_data->i2c, (u8 *)&nci_hdr, NCI_CTRL_HDR_SIZE); + if (ret != NCI_CTRL_HDR_SIZE) { + nfc_err(&drv_data->i2c->dev, "cannot read NCI header\n"); + return -EBADMSG; + } + + if (nci_hdr.plen > NCI_MAX_PAYLOAD_SIZE) { + nfc_err(&drv_data->i2c->dev, "invalid packet payload size\n"); + return -EBADMSG; + } + + *skb = nci_skb_alloc(drv_data->priv->ndev, + nci_hdr.plen + NCI_CTRL_HDR_SIZE, GFP_KERNEL); + if (!*skb) + return -ENOMEM; + + /* Copy NCI header into the SKB */ + memcpy(skb_put(*skb, NCI_CTRL_HDR_SIZE), &nci_hdr, NCI_CTRL_HDR_SIZE); + + if (nci_hdr.plen) { + /* Read the NCI payload */ + ret = i2c_master_recv(drv_data->i2c, + skb_put(*skb, nci_hdr.plen), + nci_hdr.plen); + + if (ret != nci_hdr.plen) { + nfc_err(&drv_data->i2c->dev, + "Invalid frame payload length: %u (expected %u)\n", + ret, nci_hdr.plen); + kfree_skb(*skb); + return -EBADMSG; + } + } + + return 0; +} + +static irqreturn_t nfcmrvl_i2c_int_irq_thread_fn(int irq, void *drv_data_ptr) +{ + struct nfcmrvl_i2c_drv_data *drv_data = drv_data_ptr; + struct sk_buff *skb = NULL; + int ret; + + if (!drv_data->priv) + return IRQ_HANDLED; + + if (test_bit(NFCMRVL_PHY_ERROR, &drv_data->priv->flags)) + return IRQ_HANDLED; + + ret = nfcmrvl_i2c_read(drv_data, &skb); + + switch (ret) { + case -EREMOTEIO: + set_bit(NFCMRVL_PHY_ERROR, &drv_data->priv->flags); + break; + case -ENOMEM: + case -EBADMSG: + nfc_err(&drv_data->i2c->dev, "read failed %d\n", ret); + break; + default: + if (nfcmrvl_nci_recv_frame(drv_data->priv, skb) < 0) + nfc_err(&drv_data->i2c->dev, "corrupted RX packet\n"); + break; + } + return IRQ_HANDLED; +} + +static int nfcmrvl_i2c_nci_open(struct nfcmrvl_private *priv) +{ + struct nfcmrvl_i2c_drv_data *drv_data = priv->drv_data; + + if (!drv_data) + return -ENODEV; + + return 0; +} + +static int nfcmrvl_i2c_nci_close(struct nfcmrvl_private *priv) +{ + return 0; +} + +static int nfcmrvl_i2c_nci_send(struct nfcmrvl_private *priv, + struct sk_buff *skb) +{ + struct nfcmrvl_i2c_drv_data *drv_data = priv->drv_data; + int ret; + + if (test_bit(NFCMRVL_PHY_ERROR, &priv->flags)) + return -EREMOTEIO; + + ret = i2c_master_send(drv_data->i2c, skb->data, skb->len); + + /* Retry if chip was in standby */ + if (ret == -EREMOTEIO) { + nfc_info(drv_data->dev, "chip may sleep, retry\n"); + usleep_range(6000, 10000); + ret = i2c_master_send(drv_data->i2c, skb->data, skb->len); + } + + if (ret >= 0) { + if (ret != skb->len) { + nfc_err(drv_data->dev, + "Invalid length sent: %u (expected %u)\n", + ret, skb->len); + ret = -EREMOTEIO; + } else + ret = 0; + kfree_skb(skb); + } + + return ret; +} + +static void nfcmrvl_i2c_nci_update_config(struct nfcmrvl_private *priv, + const void *param) +{ +} + +static struct nfcmrvl_if_ops i2c_ops = { + .nci_open = nfcmrvl_i2c_nci_open, + .nci_close = nfcmrvl_i2c_nci_close, + .nci_send = nfcmrvl_i2c_nci_send, + .nci_update_config = nfcmrvl_i2c_nci_update_config, +}; + +static int nfcmrvl_i2c_parse_dt(struct device_node *node, + struct nfcmrvl_platform_data *pdata) +{ + int ret; + + ret = nfcmrvl_parse_dt(node, pdata); + if (ret < 0) { + pr_err("Failed to get generic entries\n"); + return ret; + } + + if (of_find_property(node, "i2c-int-falling", NULL)) + pdata->irq_polarity = IRQF_TRIGGER_FALLING; + else + pdata->irq_polarity = IRQF_TRIGGER_RISING; + + ret = irq_of_parse_and_map(node, 0); + if (ret < 0) { + pr_err("Unable to get irq, error: %d\n", ret); + return ret; + } + pdata->irq = ret; + + return 0; +} + +static int nfcmrvl_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct nfcmrvl_i2c_drv_data *drv_data; + struct nfcmrvl_platform_data *pdata; + struct nfcmrvl_platform_data config; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + nfc_err(&client->dev, "Need I2C_FUNC_I2C\n"); + return -ENODEV; + } + + drv_data = devm_kzalloc(&client->dev, sizeof(*drv_data), GFP_KERNEL); + if (!drv_data) + return -ENOMEM; + + drv_data->i2c = client; + drv_data->dev = &client->dev; + drv_data->priv = NULL; + + i2c_set_clientdata(client, drv_data); + + pdata = client->dev.platform_data; + + if (!pdata && client->dev.of_node) + if (nfcmrvl_i2c_parse_dt(client->dev.of_node, &config) == 0) + pdata = &config; + + if (!pdata) + return -EINVAL; + + /* Request the read IRQ */ + ret = devm_request_threaded_irq(&drv_data->i2c->dev, pdata->irq, + NULL, nfcmrvl_i2c_int_irq_thread_fn, + pdata->irq_polarity | IRQF_ONESHOT, + "nfcmrvl_i2c_int", drv_data); + if (ret < 0) { + nfc_err(&drv_data->i2c->dev, + "Unable to register IRQ handler\n"); + return ret; + } + + drv_data->priv = nfcmrvl_nci_register_dev(NFCMRVL_PHY_I2C, + drv_data, &i2c_ops, + &drv_data->i2c->dev, pdata); + + if (IS_ERR(drv_data->priv)) + return PTR_ERR(drv_data->priv); + + drv_data->priv->support_fw_dnld = true; + + return 0; +} + +static int nfcmrvl_i2c_remove(struct i2c_client *client) +{ + struct nfcmrvl_i2c_drv_data *drv_data = i2c_get_clientdata(client); + + nfcmrvl_nci_unregister_dev(drv_data->priv); + + return 0; +} + + +static const struct of_device_id of_nfcmrvl_i2c_match[] = { + { .compatible = "marvell,nfc-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_nfcmrvl_i2c_match); + +static struct i2c_device_id nfcmrvl_i2c_id_table[] = { + { "nfcmrvl_i2c", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, nfcmrvl_i2c_id_table); + +static struct i2c_driver nfcmrvl_i2c_driver = { + .probe = nfcmrvl_i2c_probe, + .id_table = nfcmrvl_i2c_id_table, + .remove = nfcmrvl_i2c_remove, + .driver = { + .name = "nfcmrvl_i2c", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(of_nfcmrvl_i2c_match), + }, +}; + +module_i2c_driver(nfcmrvl_i2c_driver); + +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_DESCRIPTION("Marvell NFC-over-I2C driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c new file mode 100644 index 0000000..51c8240 --- /dev/null +++ b/drivers/nfc/nfcmrvl/main.c @@ -0,0 +1,283 @@ +/* + * Marvell NFC driver: major functions + * + * Copyright (C) 2014-2015 Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available on the worldwide web at + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/of_gpio.h> +#include <linux/nfc.h> +#include <net/nfc/nci.h> +#include <net/nfc/nci_core.h> +#include "nfcmrvl.h" + +static int nfcmrvl_nci_open(struct nci_dev *ndev) +{ + struct nfcmrvl_private *priv = nci_get_drvdata(ndev); + int err; + + if (test_and_set_bit(NFCMRVL_NCI_RUNNING, &priv->flags)) + return 0; + + /* Reset possible fault of previous session */ + clear_bit(NFCMRVL_PHY_ERROR, &priv->flags); + + err = priv->if_ops->nci_open(priv); + + if (err) + clear_bit(NFCMRVL_NCI_RUNNING, &priv->flags); + + return err; +} + +static int nfcmrvl_nci_close(struct nci_dev *ndev) +{ + struct nfcmrvl_private *priv = nci_get_drvdata(ndev); + + if (!test_and_clear_bit(NFCMRVL_NCI_RUNNING, &priv->flags)) + return 0; + + priv->if_ops->nci_close(priv); + + return 0; +} + +static int nfcmrvl_nci_send(struct nci_dev *ndev, struct sk_buff *skb) +{ + struct nfcmrvl_private *priv = nci_get_drvdata(ndev); + + nfc_info(priv->dev, "send entry, len %d\n", skb->len); + + skb->dev = (void *)ndev; + + if (priv->config.hci_muxed) { + unsigned char *hdr; + unsigned char len = skb->len; + + hdr = (char *) skb_push(skb, NFCMRVL_HCI_EVENT_HEADER_SIZE); + hdr[0] = NFCMRVL_HCI_COMMAND_CODE; + hdr[1] = NFCMRVL_HCI_OGF; + hdr[2] = NFCMRVL_HCI_OCF; + hdr[3] = len; + } + + return priv->if_ops->nci_send(priv, skb); +} + +static int nfcmrvl_nci_setup(struct nci_dev *ndev) +{ + __u8 val = 1; + + nci_set_config(ndev, NFCMRVL_PB_BAIL_OUT, 1, &val); + return 0; +} + +static int nfcmrvl_nci_fw_download(struct nci_dev *ndev, + const char *firmware_name) +{ + return nfcmrvl_fw_dnld_start(ndev, firmware_name); +} + +static struct nci_ops nfcmrvl_nci_ops = { + .open = nfcmrvl_nci_open, + .close = nfcmrvl_nci_close, + .send = nfcmrvl_nci_send, + .setup = nfcmrvl_nci_setup, + .fw_download = nfcmrvl_nci_fw_download, +}; + +struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy, + void *drv_data, + struct nfcmrvl_if_ops *ops, + struct device *dev, + struct nfcmrvl_platform_data *pdata) +{ + struct nfcmrvl_private *priv; + int rc; + int headroom; + int tailroom; + u32 protocols; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return ERR_PTR(-ENOMEM); + + priv->drv_data = drv_data; + priv->if_ops = ops; + priv->dev = dev; + priv->phy = phy; + + memcpy(&priv->config, pdata, sizeof(*pdata)); + + if (priv->config.reset_n_io) { + rc = devm_gpio_request_one(dev, + priv->config.reset_n_io, + GPIOF_OUT_INIT_LOW, + "nfcmrvl_reset_n"); + if (rc < 0) + nfc_err(dev, "failed to request reset_n io\n"); + } + + if (phy == NFCMRVL_PHY_SPI) { + headroom = NCI_SPI_HDR_LEN; + tailroom = 1; + } else + headroom = tailroom = 0; + + if (priv->config.hci_muxed) + headroom += NFCMRVL_HCI_EVENT_HEADER_SIZE; + + protocols = NFC_PROTO_JEWEL_MASK + | NFC_PROTO_MIFARE_MASK + | NFC_PROTO_FELICA_MASK + | NFC_PROTO_ISO14443_MASK + | NFC_PROTO_ISO14443_B_MASK + | NFC_PROTO_ISO15693_MASK + | NFC_PROTO_NFC_DEP_MASK; + + priv->ndev = nci_allocate_device(&nfcmrvl_nci_ops, protocols, + headroom, tailroom); + if (!priv->ndev) { + nfc_err(dev, "nci_allocate_device failed\n"); + rc = -ENOMEM; + goto error; + } + + nci_set_drvdata(priv->ndev, priv); + + rc = nci_register_device(priv->ndev); + if (rc) { + nfc_err(dev, "nci_register_device failed %d\n", rc); + goto error_free_dev; + } + + /* Ensure that controller is powered off */ + nfcmrvl_chip_halt(priv); + + rc = nfcmrvl_fw_dnld_init(priv); + if (rc) { + nfc_err(dev, "failed to initialize FW download %d\n", rc); + goto error_free_dev; + } + + nfc_info(dev, "registered with nci successfully\n"); + return priv; + +error_free_dev: + nci_free_device(priv->ndev); +error: + kfree(priv); + return ERR_PTR(rc); +} +EXPORT_SYMBOL_GPL(nfcmrvl_nci_register_dev); + +void nfcmrvl_nci_unregister_dev(struct nfcmrvl_private *priv) +{ + struct nci_dev *ndev = priv->ndev; + + if (priv->ndev->nfc_dev->fw_download_in_progress) + nfcmrvl_fw_dnld_abort(priv); + + nfcmrvl_fw_dnld_deinit(priv); + + if (priv->config.reset_n_io) + devm_gpio_free(priv->dev, priv->config.reset_n_io); + + nci_unregister_device(ndev); + nci_free_device(ndev); + kfree(priv); +} +EXPORT_SYMBOL_GPL(nfcmrvl_nci_unregister_dev); + +int nfcmrvl_nci_recv_frame(struct nfcmrvl_private *priv, struct sk_buff *skb) +{ + if (priv->config.hci_muxed) { + if (skb->data[0] == NFCMRVL_HCI_EVENT_CODE && + skb->data[1] == NFCMRVL_HCI_NFC_EVENT_CODE) { + /* Data packet, let's extract NCI payload */ + skb_pull(skb, NFCMRVL_HCI_EVENT_HEADER_SIZE); + } else { + /* Skip this packet */ + kfree_skb(skb); + return 0; + } + } + + if (priv->ndev->nfc_dev->fw_download_in_progress) { + nfcmrvl_fw_dnld_recv_frame(priv, skb); + return 0; + } + + if (test_bit(NFCMRVL_NCI_RUNNING, &priv->flags)) + nci_recv_frame(priv->ndev, skb); + else { + /* Drop this packet since nobody wants it */ + kfree_skb(skb); + return 0; + } + + return 0; +} +EXPORT_SYMBOL_GPL(nfcmrvl_nci_recv_frame); + +void nfcmrvl_chip_reset(struct nfcmrvl_private *priv) +{ + /* Reset possible fault of previous session */ + clear_bit(NFCMRVL_PHY_ERROR, &priv->flags); + + if (priv->config.reset_n_io) { + nfc_info(priv->dev, "reset the chip\n"); + gpio_set_value(priv->config.reset_n_io, 0); + usleep_range(5000, 10000); + gpio_set_value(priv->config.reset_n_io, 1); + } else + nfc_info(priv->dev, "no reset available on this interface\n"); +} + +void nfcmrvl_chip_halt(struct nfcmrvl_private *priv) +{ + if (priv->config.reset_n_io) + gpio_set_value(priv->config.reset_n_io, 0); +} + +int nfcmrvl_parse_dt(struct device_node *node, + struct nfcmrvl_platform_data *pdata) +{ + int reset_n_io; + + reset_n_io = of_get_named_gpio(node, "reset-n-io", 0); + if (reset_n_io < 0) { + pr_info("no reset-n-io config\n"); + reset_n_io = 0; + } else if (!gpio_is_valid(reset_n_io)) { + pr_err("invalid reset-n-io GPIO\n"); + return reset_n_io; + } + pdata->reset_n_io = reset_n_io; + + if (of_find_property(node, "hci-muxed", NULL)) + pdata->hci_muxed = 1; + else + pdata->hci_muxed = 0; + + return 0; +} +EXPORT_SYMBOL_GPL(nfcmrvl_parse_dt); + +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_DESCRIPTION("Marvell NFC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/nfc/nfcmrvl/nfcmrvl.h b/drivers/nfc/nfcmrvl/nfcmrvl.h new file mode 100644 index 0000000..de68ff4 --- /dev/null +++ b/drivers/nfc/nfcmrvl/nfcmrvl.h @@ -0,0 +1,117 @@ +/** + * Marvell NFC driver + * + * Copyright (C) 2014-2015, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available on the worldwide web at + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + **/ + +#ifndef _NFCMRVL_H_ +#define _NFCMRVL_H_ + +#include <linux/platform_data/nfcmrvl.h> + +#include "fw_dnld.h" + +/* Define private flags: */ +#define NFCMRVL_NCI_RUNNING 1 +#define NFCMRVL_PHY_ERROR 2 + +#define NFCMRVL_EXT_COEX_ID 0xE0 +#define NFCMRVL_NOT_ALLOWED_ID 0xE1 +#define NFCMRVL_ACTIVE_ID 0xE2 +#define NFCMRVL_EXT_COEX_ENABLE 1 +#define NFCMRVL_GPIO_PIN_NFC_NOT_ALLOWED 0xA +#define NFCMRVL_GPIO_PIN_NFC_ACTIVE 0xB +#define NFCMRVL_NCI_MAX_EVENT_SIZE 260 + +/* +** NCI FW Parmaters +*/ + +#define NFCMRVL_PB_BAIL_OUT 0x11 +#define NFCMRVL_PROP_REF_CLOCK 0xF0 +#define NFCMRVL_PROP_SET_HI_CONFIG 0xF1 + +/* +** HCI defines +*/ + +#define NFCMRVL_HCI_EVENT_HEADER_SIZE 0x04 +#define NFCMRVL_HCI_EVENT_CODE 0x04 +#define NFCMRVL_HCI_NFC_EVENT_CODE 0xFF +#define NFCMRVL_HCI_COMMAND_CODE 0x01 +#define NFCMRVL_HCI_OGF 0x81 +#define NFCMRVL_HCI_OCF 0xFE + +enum nfcmrvl_phy { + NFCMRVL_PHY_USB = 0, + NFCMRVL_PHY_UART = 1, + NFCMRVL_PHY_I2C = 2, + NFCMRVL_PHY_SPI = 3, +}; + +struct nfcmrvl_private { + + unsigned long flags; + + /* Platform configuration */ + struct nfcmrvl_platform_data config; + + /* Parent dev */ + struct nci_dev *ndev; + + /* FW download context */ + struct nfcmrvl_fw_dnld fw_dnld; + + /* FW download support */ + bool support_fw_dnld; + + /* + ** PHY related information + */ + + /* PHY driver context */ + void *drv_data; + /* PHY device */ + struct device *dev; + /* PHY type */ + enum nfcmrvl_phy phy; + /* Low level driver ops */ + struct nfcmrvl_if_ops *if_ops; +}; + +struct nfcmrvl_if_ops { + int (*nci_open) (struct nfcmrvl_private *priv); + int (*nci_close) (struct nfcmrvl_private *priv); + int (*nci_send) (struct nfcmrvl_private *priv, struct sk_buff *skb); + void (*nci_update_config)(struct nfcmrvl_private *priv, + const void *param); +}; + +void nfcmrvl_nci_unregister_dev(struct nfcmrvl_private *priv); +int nfcmrvl_nci_recv_frame(struct nfcmrvl_private *priv, struct sk_buff *skb); +struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy, + void *drv_data, + struct nfcmrvl_if_ops *ops, + struct device *dev, + struct nfcmrvl_platform_data *pdata); + + +void nfcmrvl_chip_reset(struct nfcmrvl_private *priv); +void nfcmrvl_chip_halt(struct nfcmrvl_private *priv); + +int nfcmrvl_parse_dt(struct device_node *node, + struct nfcmrvl_platform_data *pdata); + +#endif diff --git a/drivers/nfc/nfcmrvl/spi.c b/drivers/nfc/nfcmrvl/spi.c new file mode 100644 index 0000000..a7faa0b --- /dev/null +++ b/drivers/nfc/nfcmrvl/spi.c @@ -0,0 +1,228 @@ +/** + * Marvell NFC-over-SPI driver: SPI interface related functions + * + * Copyright (C) 2015, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available on the worldwide web at + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + **/ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/pm_runtime.h> +#include <linux/nfc.h> +#include <linux/gpio.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <net/nfc/nci.h> +#include <net/nfc/nci_core.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> +#include "nfcmrvl.h" + +#define SPI_WAIT_HANDSHAKE 1 + +struct nfcmrvl_spi_drv_data { + unsigned long flags; + struct spi_device *spi; + struct nci_spi *nci_spi; + struct completion handshake_completion; + struct nfcmrvl_private *priv; +}; + +static irqreturn_t nfcmrvl_spi_int_irq_thread_fn(int irq, void *drv_data_ptr) +{ + struct nfcmrvl_spi_drv_data *drv_data = drv_data_ptr; + struct sk_buff *skb; + + /* + * Special case where we are waiting for SPI_INT deassertion to start a + * transfer. + */ + if (test_and_clear_bit(SPI_WAIT_HANDSHAKE, &drv_data->flags)) { + complete(&drv_data->handshake_completion); + return IRQ_HANDLED; + } + + /* Normal case, SPI_INT deasserted by slave to trigger a master read */ + + skb = nci_spi_read(drv_data->nci_spi); + if (!skb) { + nfc_err(&drv_data->spi->dev, "failed to read spi packet"); + return IRQ_HANDLED; + } + + if (nfcmrvl_nci_recv_frame(drv_data->priv, skb) < 0) + nfc_err(&drv_data->spi->dev, "corrupted RX packet"); + + return IRQ_HANDLED; +} + +static int nfcmrvl_spi_nci_open(struct nfcmrvl_private *priv) +{ + return 0; +} + +static int nfcmrvl_spi_nci_close(struct nfcmrvl_private *priv) +{ + return 0; +} + +static int nfcmrvl_spi_nci_send(struct nfcmrvl_private *priv, + struct sk_buff *skb) +{ + struct nfcmrvl_spi_drv_data *drv_data = priv->drv_data; + int err; + + /* Reinit completion for slave handshake */ + reinit_completion(&drv_data->handshake_completion); + set_bit(SPI_WAIT_HANDSHAKE, &drv_data->flags); + + /* + * Append a dummy byte at the end of SPI frame. This is due to a + * specific DMA implementation in the controller + */ + skb_put(skb, 1); + + /* Send the SPI packet */ + err = nci_spi_send(drv_data->nci_spi, &drv_data->handshake_completion, + skb); + if (err != 0) { + nfc_err(priv->dev, "spi_send failed %d", err); + kfree_skb(skb); + } + return err; +} + +static void nfcmrvl_spi_nci_update_config(struct nfcmrvl_private *priv, + const void *param) +{ + struct nfcmrvl_spi_drv_data *drv_data = priv->drv_data; + const struct nfcmrvl_fw_spi_config *config = param; + + drv_data->nci_spi->xfer_speed_hz = config->clk; +} + +static struct nfcmrvl_if_ops spi_ops = { + .nci_open = nfcmrvl_spi_nci_open, + .nci_close = nfcmrvl_spi_nci_close, + .nci_send = nfcmrvl_spi_nci_send, + .nci_update_config = nfcmrvl_spi_nci_update_config, +}; + +static int nfcmrvl_spi_parse_dt(struct device_node *node, + struct nfcmrvl_platform_data *pdata) +{ + int ret; + + ret = nfcmrvl_parse_dt(node, pdata); + if (ret < 0) { + pr_err("Failed to get generic entries\n"); + return ret; + } + + ret = irq_of_parse_and_map(node, 0); + if (ret < 0) { + pr_err("Unable to get irq, error: %d\n", ret); + return ret; + } + pdata->irq = ret; + + return 0; +} + +static int nfcmrvl_spi_probe(struct spi_device *spi) +{ + struct nfcmrvl_platform_data *pdata; + struct nfcmrvl_platform_data config; + struct nfcmrvl_spi_drv_data *drv_data; + int ret = 0; + + drv_data = devm_kzalloc(&spi->dev, sizeof(*drv_data), GFP_KERNEL); + if (!drv_data) + return -ENOMEM; + + drv_data->spi = spi; + drv_data->priv = NULL; + spi_set_drvdata(spi, drv_data); + + pdata = spi->dev.platform_data; + + if (!pdata && spi->dev.of_node) + if (nfcmrvl_spi_parse_dt(spi->dev.of_node, &config) == 0) + pdata = &config; + + if (!pdata) + return -EINVAL; + + ret = devm_request_threaded_irq(&drv_data->spi->dev, pdata->irq, + NULL, nfcmrvl_spi_int_irq_thread_fn, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "nfcmrvl_spi_int", drv_data); + if (ret < 0) { + nfc_err(&drv_data->spi->dev, "Unable to register IRQ handler"); + return -ENODEV; + } + + drv_data->priv = nfcmrvl_nci_register_dev(NFCMRVL_PHY_SPI, + drv_data, &spi_ops, + &drv_data->spi->dev, + pdata); + if (IS_ERR(drv_data->priv)) + return PTR_ERR(drv_data->priv); + + drv_data->priv->support_fw_dnld = true; + + drv_data->nci_spi = nci_spi_allocate_spi(drv_data->spi, 0, 10, + drv_data->priv->ndev); + + /* Init completion for slave handshake */ + init_completion(&drv_data->handshake_completion); + return 0; +} + +static int nfcmrvl_spi_remove(struct spi_device *spi) +{ + struct nfcmrvl_spi_drv_data *drv_data = spi_get_drvdata(spi); + + nfcmrvl_nci_unregister_dev(drv_data->priv); + return 0; +} + +static const struct of_device_id of_nfcmrvl_spi_match[] = { + { .compatible = "marvell,nfc-spi", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_nfcmrvl_spi_match); + +static const struct spi_device_id nfcmrvl_spi_id_table[] = { + { "nfcmrvl_spi", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, nfcmrvl_spi_id_table); + +static struct spi_driver nfcmrvl_spi_driver = { + .probe = nfcmrvl_spi_probe, + .remove = nfcmrvl_spi_remove, + .id_table = nfcmrvl_spi_id_table, + .driver = { + .name = "nfcmrvl_spi", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(of_nfcmrvl_spi_match), + }, +}; + +module_spi_driver(nfcmrvl_spi_driver); + +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_DESCRIPTION("Marvell NFC-over-SPI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/nfc/nfcmrvl/uart.c b/drivers/nfc/nfcmrvl/uart.c new file mode 100644 index 0000000..83a99e3 --- /dev/null +++ b/drivers/nfc/nfcmrvl/uart.c @@ -0,0 +1,233 @@ +/** + * Marvell NFC-over-UART driver + * + * Copyright (C) 2015, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available on the worldwide web at + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/of_gpio.h> +#include <net/nfc/nci.h> +#include <net/nfc/nci_core.h> +#include "nfcmrvl.h" + +static unsigned int hci_muxed; +static unsigned int flow_control; +static unsigned int break_control; +static unsigned int reset_n_io; + +/* +** NFCMRVL NCI OPS +*/ + +static int nfcmrvl_uart_nci_open(struct nfcmrvl_private *priv) +{ + return 0; +} + +static int nfcmrvl_uart_nci_close(struct nfcmrvl_private *priv) +{ + return 0; +} + +static int nfcmrvl_uart_nci_send(struct nfcmrvl_private *priv, + struct sk_buff *skb) +{ + struct nci_uart *nu = priv->drv_data; + + return nu->ops.send(nu, skb); +} + +static void nfcmrvl_uart_nci_update_config(struct nfcmrvl_private *priv, + const void *param) +{ + struct nci_uart *nu = priv->drv_data; + const struct nfcmrvl_fw_uart_config *config = param; + + nci_uart_set_config(nu, le32_to_cpu(config->baudrate), + config->flow_control); +} + +static struct nfcmrvl_if_ops uart_ops = { + .nci_open = nfcmrvl_uart_nci_open, + .nci_close = nfcmrvl_uart_nci_close, + .nci_send = nfcmrvl_uart_nci_send, + .nci_update_config = nfcmrvl_uart_nci_update_config +}; + +static int nfcmrvl_uart_parse_dt(struct device_node *node, + struct nfcmrvl_platform_data *pdata) +{ + struct device_node *matched_node; + int ret; + + matched_node = of_find_compatible_node(node, NULL, "marvell,nfc-uart"); + if (!matched_node) { + matched_node = of_find_compatible_node(node, NULL, + "mrvl,nfc-uart"); + if (!matched_node) + return -ENODEV; + } + + ret = nfcmrvl_parse_dt(matched_node, pdata); + if (ret < 0) { + pr_err("Failed to get generic entries\n"); + return ret; + } + + if (of_find_property(matched_node, "flow-control", NULL)) + pdata->flow_control = 1; + else + pdata->flow_control = 0; + + if (of_find_property(matched_node, "break-control", NULL)) + pdata->break_control = 1; + else + pdata->break_control = 0; + + return 0; +} + +/* +** NCI UART OPS +*/ + +static int nfcmrvl_nci_uart_open(struct nci_uart *nu) +{ + struct nfcmrvl_private *priv; + struct nfcmrvl_platform_data *pdata = NULL; + struct nfcmrvl_platform_data config; + + /* + * Platform data cannot be used here since usually it is already used + * by low level serial driver. We can try to retrieve serial device + * and check if DT entries were added. + */ + + if (nu->tty->dev->parent && nu->tty->dev->parent->of_node) + if (nfcmrvl_uart_parse_dt(nu->tty->dev->parent->of_node, + &config) == 0) + pdata = &config; + + if (!pdata) { + pr_info("No platform data / DT -> fallback to module params\n"); + config.hci_muxed = hci_muxed; + config.reset_n_io = reset_n_io; + config.flow_control = flow_control; + config.break_control = break_control; + pdata = &config; + } + + priv = nfcmrvl_nci_register_dev(NFCMRVL_PHY_UART, nu, &uart_ops, + nu->tty->dev, pdata); + if (IS_ERR(priv)) + return PTR_ERR(priv); + + priv->support_fw_dnld = true; + + nu->drv_data = priv; + nu->ndev = priv->ndev; + + return 0; +} + +static void nfcmrvl_nci_uart_close(struct nci_uart *nu) +{ + nfcmrvl_nci_unregister_dev((struct nfcmrvl_private *)nu->drv_data); +} + +static int nfcmrvl_nci_uart_recv(struct nci_uart *nu, struct sk_buff *skb) +{ + return nfcmrvl_nci_recv_frame((struct nfcmrvl_private *)nu->drv_data, + skb); +} + +static void nfcmrvl_nci_uart_tx_start(struct nci_uart *nu) +{ + struct nfcmrvl_private *priv = (struct nfcmrvl_private *)nu->drv_data; + + if (priv->ndev->nfc_dev->fw_download_in_progress) + return; + + /* Remove BREAK to wake up the NFCC */ + if (priv->config.break_control && nu->tty->ops->break_ctl) { + nu->tty->ops->break_ctl(nu->tty, 0); + usleep_range(3000, 5000); + } +} + +static void nfcmrvl_nci_uart_tx_done(struct nci_uart *nu) +{ + struct nfcmrvl_private *priv = (struct nfcmrvl_private *)nu->drv_data; + + if (priv->ndev->nfc_dev->fw_download_in_progress) + return; + + /* + ** To ensure that if the NFCC goes in DEEP SLEEP sate we can wake him + ** up. we set BREAK. Once we will be ready to send again we will remove + ** it. + */ + if (priv->config.break_control && nu->tty->ops->break_ctl) { + nu->tty->ops->break_ctl(nu->tty, -1); + usleep_range(1000, 3000); + } +} + +static struct nci_uart nfcmrvl_nci_uart = { + .owner = THIS_MODULE, + .name = "nfcmrvl_uart", + .driver = NCI_UART_DRIVER_MARVELL, + .ops = { + .open = nfcmrvl_nci_uart_open, + .close = nfcmrvl_nci_uart_close, + .recv = nfcmrvl_nci_uart_recv, + .tx_start = nfcmrvl_nci_uart_tx_start, + .tx_done = nfcmrvl_nci_uart_tx_done, + } +}; + +/* +** Module init +*/ + +static int nfcmrvl_uart_init_module(void) +{ + return nci_uart_register(&nfcmrvl_nci_uart); +} + +static void nfcmrvl_uart_exit_module(void) +{ + nci_uart_unregister(&nfcmrvl_nci_uart); +} + +module_init(nfcmrvl_uart_init_module); +module_exit(nfcmrvl_uart_exit_module); + +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_DESCRIPTION("Marvell NFC-over-UART"); +MODULE_LICENSE("GPL v2"); + +module_param(flow_control, uint, 0); +MODULE_PARM_DESC(flow_control, "Tell if UART needs flow control at init."); + +module_param(break_control, uint, 0); +MODULE_PARM_DESC(break_control, "Tell if UART driver must drive break signal."); + +module_param(hci_muxed, uint, 0); +MODULE_PARM_DESC(hci_muxed, "Tell if transport is muxed in HCI one."); + +module_param(reset_n_io, uint, 0); +MODULE_PARM_DESC(reset_n_io, "GPIO that is wired to RESET_N signal."); diff --git a/drivers/nfc/nfcmrvl/usb.c b/drivers/nfc/nfcmrvl/usb.c new file mode 100644 index 0000000..585a0f2 --- /dev/null +++ b/drivers/nfc/nfcmrvl/usb.c @@ -0,0 +1,472 @@ +/** + * Marvell NFC-over-USB driver: USB interface related functions + * + * Copyright (C) 2014, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available on the worldwide web at + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + **/ + +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/nfc.h> +#include <net/nfc/nci.h> +#include <net/nfc/nci_core.h> +#include "nfcmrvl.h" + +static struct usb_device_id nfcmrvl_table[] = { + { USB_DEVICE_AND_INTERFACE_INFO(0x1286, 0x2046, + USB_CLASS_VENDOR_SPEC, 4, 1) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, nfcmrvl_table); + +#define NFCMRVL_USB_BULK_RUNNING 1 +#define NFCMRVL_USB_SUSPENDING 2 + +struct nfcmrvl_usb_drv_data { + struct usb_device *udev; + struct usb_interface *intf; + unsigned long flags; + struct work_struct waker; + struct usb_anchor tx_anchor; + struct usb_anchor bulk_anchor; + struct usb_anchor deferred; + int tx_in_flight; + /* protects tx_in_flight */ + spinlock_t txlock; + struct usb_endpoint_descriptor *bulk_tx_ep; + struct usb_endpoint_descriptor *bulk_rx_ep; + int suspend_count; + struct nfcmrvl_private *priv; +}; + +static int nfcmrvl_inc_tx(struct nfcmrvl_usb_drv_data *drv_data) +{ + unsigned long flags; + int rv; + + spin_lock_irqsave(&drv_data->txlock, flags); + rv = test_bit(NFCMRVL_USB_SUSPENDING, &drv_data->flags); + if (!rv) + drv_data->tx_in_flight++; + spin_unlock_irqrestore(&drv_data->txlock, flags); + + return rv; +} + +static void nfcmrvl_bulk_complete(struct urb *urb) +{ + struct nfcmrvl_usb_drv_data *drv_data = urb->context; + struct sk_buff *skb; + int err; + + dev_dbg(&drv_data->udev->dev, "urb %p status %d count %d\n", + urb, urb->status, urb->actual_length); + + if (!test_bit(NFCMRVL_NCI_RUNNING, &drv_data->flags)) + return; + + if (!urb->status) { + skb = nci_skb_alloc(drv_data->priv->ndev, urb->actual_length, + GFP_ATOMIC); + if (!skb) { + nfc_err(&drv_data->udev->dev, "failed to alloc mem\n"); + } else { + memcpy(skb_put(skb, urb->actual_length), + urb->transfer_buffer, urb->actual_length); + if (nfcmrvl_nci_recv_frame(drv_data->priv, skb) < 0) + nfc_err(&drv_data->udev->dev, + "corrupted Rx packet\n"); + } + } + + if (!test_bit(NFCMRVL_USB_BULK_RUNNING, &drv_data->flags)) + return; + + usb_anchor_urb(urb, &drv_data->bulk_anchor); + usb_mark_last_busy(drv_data->udev); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) { + /* -EPERM: urb is being killed; + * -ENODEV: device got disconnected + */ + if (err != -EPERM && err != -ENODEV) + nfc_err(&drv_data->udev->dev, + "urb %p failed to resubmit (%d)\n", urb, -err); + usb_unanchor_urb(urb); + } +} + +static int +nfcmrvl_submit_bulk_urb(struct nfcmrvl_usb_drv_data *drv_data, gfp_t mem_flags) +{ + struct urb *urb; + unsigned char *buf; + unsigned int pipe; + int err, size = NFCMRVL_NCI_MAX_EVENT_SIZE; + + if (!drv_data->bulk_rx_ep) + return -ENODEV; + + urb = usb_alloc_urb(0, mem_flags); + if (!urb) + return -ENOMEM; + + buf = kmalloc(size, mem_flags); + if (!buf) { + usb_free_urb(urb); + return -ENOMEM; + } + + pipe = usb_rcvbulkpipe(drv_data->udev, + drv_data->bulk_rx_ep->bEndpointAddress); + + usb_fill_bulk_urb(urb, drv_data->udev, pipe, buf, size, + nfcmrvl_bulk_complete, drv_data); + + urb->transfer_flags |= URB_FREE_BUFFER; + + usb_mark_last_busy(drv_data->udev); + usb_anchor_urb(urb, &drv_data->bulk_anchor); + + err = usb_submit_urb(urb, mem_flags); + if (err) { + if (err != -EPERM && err != -ENODEV) + nfc_err(&drv_data->udev->dev, + "urb %p submission failed (%d)\n", urb, -err); + usb_unanchor_urb(urb); + } + + usb_free_urb(urb); + + return err; +} + +static void nfcmrvl_tx_complete(struct urb *urb) +{ + struct sk_buff *skb = urb->context; + struct nci_dev *ndev = (struct nci_dev *)skb->dev; + struct nfcmrvl_private *priv = nci_get_drvdata(ndev); + struct nfcmrvl_usb_drv_data *drv_data = priv->drv_data; + + nfc_info(priv->dev, "urb %p status %d count %d\n", + urb, urb->status, urb->actual_length); + + spin_lock(&drv_data->txlock); + drv_data->tx_in_flight--; + spin_unlock(&drv_data->txlock); + + kfree(urb->setup_packet); + kfree_skb(skb); +} + +static int nfcmrvl_usb_nci_open(struct nfcmrvl_private *priv) +{ + struct nfcmrvl_usb_drv_data *drv_data = priv->drv_data; + int err; + + err = usb_autopm_get_interface(drv_data->intf); + if (err) + return err; + + drv_data->intf->needs_remote_wakeup = 1; + + err = nfcmrvl_submit_bulk_urb(drv_data, GFP_KERNEL); + if (err) + goto failed; + + set_bit(NFCMRVL_USB_BULK_RUNNING, &drv_data->flags); + nfcmrvl_submit_bulk_urb(drv_data, GFP_KERNEL); + + usb_autopm_put_interface(drv_data->intf); + return 0; + +failed: + usb_autopm_put_interface(drv_data->intf); + return err; +} + +static void nfcmrvl_usb_stop_traffic(struct nfcmrvl_usb_drv_data *drv_data) +{ + usb_kill_anchored_urbs(&drv_data->bulk_anchor); +} + +static int nfcmrvl_usb_nci_close(struct nfcmrvl_private *priv) +{ + struct nfcmrvl_usb_drv_data *drv_data = priv->drv_data; + int err; + + cancel_work_sync(&drv_data->waker); + + clear_bit(NFCMRVL_USB_BULK_RUNNING, &drv_data->flags); + + nfcmrvl_usb_stop_traffic(drv_data); + usb_kill_anchored_urbs(&drv_data->tx_anchor); + err = usb_autopm_get_interface(drv_data->intf); + if (err) + goto failed; + + drv_data->intf->needs_remote_wakeup = 0; + usb_autopm_put_interface(drv_data->intf); + +failed: + usb_scuttle_anchored_urbs(&drv_data->deferred); + return 0; +} + +static int nfcmrvl_usb_nci_send(struct nfcmrvl_private *priv, + struct sk_buff *skb) +{ + struct nfcmrvl_usb_drv_data *drv_data = priv->drv_data; + struct urb *urb; + unsigned int pipe; + int err; + + if (!drv_data->bulk_tx_ep) + return -ENODEV; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) + return -ENOMEM; + + pipe = usb_sndbulkpipe(drv_data->udev, + drv_data->bulk_tx_ep->bEndpointAddress); + + usb_fill_bulk_urb(urb, drv_data->udev, pipe, skb->data, skb->len, + nfcmrvl_tx_complete, skb); + + err = nfcmrvl_inc_tx(drv_data); + if (err) { + usb_anchor_urb(urb, &drv_data->deferred); + schedule_work(&drv_data->waker); + err = 0; + goto done; + } + + usb_anchor_urb(urb, &drv_data->tx_anchor); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) { + if (err != -EPERM && err != -ENODEV) + nfc_err(&drv_data->udev->dev, + "urb %p submission failed (%d)\n", urb, -err); + kfree(urb->setup_packet); + usb_unanchor_urb(urb); + } else { + usb_mark_last_busy(drv_data->udev); + } + +done: + usb_free_urb(urb); + return err; +} + +static struct nfcmrvl_if_ops usb_ops = { + .nci_open = nfcmrvl_usb_nci_open, + .nci_close = nfcmrvl_usb_nci_close, + .nci_send = nfcmrvl_usb_nci_send, +}; + +static void nfcmrvl_waker(struct work_struct *work) +{ + struct nfcmrvl_usb_drv_data *drv_data = + container_of(work, struct nfcmrvl_usb_drv_data, waker); + int err; + + err = usb_autopm_get_interface(drv_data->intf); + if (err) + return; + + usb_autopm_put_interface(drv_data->intf); +} + +static int nfcmrvl_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_endpoint_descriptor *ep_desc; + struct nfcmrvl_usb_drv_data *drv_data; + struct nfcmrvl_private *priv; + int i; + struct usb_device *udev = interface_to_usbdev(intf); + struct nfcmrvl_platform_data config; + + /* No configuration for USB */ + memset(&config, 0, sizeof(config)); + + nfc_info(&udev->dev, "intf %p id %p\n", intf, id); + + drv_data = devm_kzalloc(&intf->dev, sizeof(*drv_data), GFP_KERNEL); + if (!drv_data) + return -ENOMEM; + + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { + ep_desc = &intf->cur_altsetting->endpoint[i].desc; + + if (!drv_data->bulk_tx_ep && + usb_endpoint_is_bulk_out(ep_desc)) { + drv_data->bulk_tx_ep = ep_desc; + continue; + } + + if (!drv_data->bulk_rx_ep && + usb_endpoint_is_bulk_in(ep_desc)) { + drv_data->bulk_rx_ep = ep_desc; + continue; + } + } + + if (!drv_data->bulk_tx_ep || !drv_data->bulk_rx_ep) + return -ENODEV; + + drv_data->udev = udev; + drv_data->intf = intf; + + INIT_WORK(&drv_data->waker, nfcmrvl_waker); + spin_lock_init(&drv_data->txlock); + + init_usb_anchor(&drv_data->tx_anchor); + init_usb_anchor(&drv_data->bulk_anchor); + init_usb_anchor(&drv_data->deferred); + + priv = nfcmrvl_nci_register_dev(NFCMRVL_PHY_USB, drv_data, &usb_ops, + &drv_data->udev->dev, &config); + if (IS_ERR(priv)) + return PTR_ERR(priv); + + drv_data->priv = priv; + drv_data->priv->support_fw_dnld = false; + + priv->dev = &drv_data->udev->dev; + + usb_set_intfdata(intf, drv_data); + + return 0; +} + +static void nfcmrvl_disconnect(struct usb_interface *intf) +{ + struct nfcmrvl_usb_drv_data *drv_data = usb_get_intfdata(intf); + + if (!drv_data) + return; + + nfc_info(&drv_data->udev->dev, "intf %p\n", intf); + + nfcmrvl_nci_unregister_dev(drv_data->priv); + + usb_set_intfdata(drv_data->intf, NULL); +} + +#ifdef CONFIG_PM +static int nfcmrvl_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct nfcmrvl_usb_drv_data *drv_data = usb_get_intfdata(intf); + + nfc_info(&drv_data->udev->dev, "intf %p\n", intf); + + if (drv_data->suspend_count++) + return 0; + + spin_lock_irq(&drv_data->txlock); + if (!(PMSG_IS_AUTO(message) && drv_data->tx_in_flight)) { + set_bit(NFCMRVL_USB_SUSPENDING, &drv_data->flags); + spin_unlock_irq(&drv_data->txlock); + } else { + spin_unlock_irq(&drv_data->txlock); + drv_data->suspend_count--; + return -EBUSY; + } + + nfcmrvl_usb_stop_traffic(drv_data); + usb_kill_anchored_urbs(&drv_data->tx_anchor); + + return 0; +} + +static void nfcmrvl_play_deferred(struct nfcmrvl_usb_drv_data *drv_data) +{ + struct urb *urb; + int err; + + while ((urb = usb_get_from_anchor(&drv_data->deferred))) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) + break; + + drv_data->tx_in_flight++; + } + usb_scuttle_anchored_urbs(&drv_data->deferred); +} + +static int nfcmrvl_resume(struct usb_interface *intf) +{ + struct nfcmrvl_usb_drv_data *drv_data = usb_get_intfdata(intf); + int err = 0; + + nfc_info(&drv_data->udev->dev, "intf %p\n", intf); + + if (--drv_data->suspend_count) + return 0; + + if (!test_bit(NFCMRVL_NCI_RUNNING, &drv_data->flags)) + goto done; + + if (test_bit(NFCMRVL_USB_BULK_RUNNING, &drv_data->flags)) { + err = nfcmrvl_submit_bulk_urb(drv_data, GFP_NOIO); + if (err) { + clear_bit(NFCMRVL_USB_BULK_RUNNING, &drv_data->flags); + goto failed; + } + + nfcmrvl_submit_bulk_urb(drv_data, GFP_NOIO); + } + + spin_lock_irq(&drv_data->txlock); + nfcmrvl_play_deferred(drv_data); + clear_bit(NFCMRVL_USB_SUSPENDING, &drv_data->flags); + spin_unlock_irq(&drv_data->txlock); + + return 0; + +failed: + usb_scuttle_anchored_urbs(&drv_data->deferred); +done: + spin_lock_irq(&drv_data->txlock); + clear_bit(NFCMRVL_USB_SUSPENDING, &drv_data->flags); + spin_unlock_irq(&drv_data->txlock); + + return err; +} +#endif + +static struct usb_driver nfcmrvl_usb_driver = { + .name = "nfcmrvl", + .probe = nfcmrvl_probe, + .disconnect = nfcmrvl_disconnect, +#ifdef CONFIG_PM + .suspend = nfcmrvl_suspend, + .resume = nfcmrvl_resume, + .reset_resume = nfcmrvl_resume, +#endif + .id_table = nfcmrvl_table, + .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, + .soft_unbind = 1, +}; +module_usb_driver(nfcmrvl_usb_driver); + +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_DESCRIPTION("Marvell NFC-over-USB driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/nfc/nfcsim.c b/drivers/nfc/nfcsim.c new file mode 100644 index 0000000..a466e79 --- /dev/null +++ b/drivers/nfc/nfcsim.c @@ -0,0 +1,512 @@ +/* + * NFC hardware simulation driver + * Copyright (c) 2013, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/ctype.h> +#include <linux/debugfs.h> +#include <linux/nfc.h> +#include <net/nfc/nfc.h> +#include <net/nfc/digital.h> + +#define NFCSIM_ERR(d, fmt, args...) nfc_err(&d->nfc_digital_dev->nfc_dev->dev, \ + "%s: " fmt, __func__, ## args) + +#define NFCSIM_DBG(d, fmt, args...) dev_dbg(&d->nfc_digital_dev->nfc_dev->dev, \ + "%s: " fmt, __func__, ## args) + +#define NFCSIM_VERSION "0.2" + +#define NFCSIM_MODE_NONE 0 +#define NFCSIM_MODE_INITIATOR 1 +#define NFCSIM_MODE_TARGET 2 + +#define NFCSIM_CAPABILITIES (NFC_DIGITAL_DRV_CAPS_IN_CRC | \ + NFC_DIGITAL_DRV_CAPS_TG_CRC) + +struct nfcsim { + struct nfc_digital_dev *nfc_digital_dev; + + struct work_struct recv_work; + struct delayed_work send_work; + + struct nfcsim_link *link_in; + struct nfcsim_link *link_out; + + bool up; + u8 mode; + u8 rf_tech; + + u16 recv_timeout; + + nfc_digital_cmd_complete_t cb; + void *arg; + + u8 dropframe; +}; + +struct nfcsim_link { + struct mutex lock; + + u8 rf_tech; + u8 mode; + + u8 shutdown; + + struct sk_buff *skb; + wait_queue_head_t recv_wait; + u8 cond; +}; + +static struct nfcsim_link *nfcsim_link_new(void) +{ + struct nfcsim_link *link; + + link = kzalloc(sizeof(struct nfcsim_link), GFP_KERNEL); + if (!link) + return NULL; + + mutex_init(&link->lock); + init_waitqueue_head(&link->recv_wait); + + return link; +} + +static void nfcsim_link_free(struct nfcsim_link *link) +{ + dev_kfree_skb(link->skb); + kfree(link); +} + +static void nfcsim_link_recv_wake(struct nfcsim_link *link) +{ + link->cond = 1; + wake_up_interruptible(&link->recv_wait); +} + +static void nfcsim_link_set_skb(struct nfcsim_link *link, struct sk_buff *skb, + u8 rf_tech, u8 mode) +{ + mutex_lock(&link->lock); + + dev_kfree_skb(link->skb); + link->skb = skb; + link->rf_tech = rf_tech; + link->mode = mode; + + mutex_unlock(&link->lock); +} + +static void nfcsim_link_recv_cancel(struct nfcsim_link *link) +{ + mutex_lock(&link->lock); + + link->mode = NFCSIM_MODE_NONE; + + mutex_unlock(&link->lock); + + nfcsim_link_recv_wake(link); +} + +static void nfcsim_link_shutdown(struct nfcsim_link *link) +{ + mutex_lock(&link->lock); + + link->shutdown = 1; + link->mode = NFCSIM_MODE_NONE; + + mutex_unlock(&link->lock); + + nfcsim_link_recv_wake(link); +} + +static struct sk_buff *nfcsim_link_recv_skb(struct nfcsim_link *link, + int timeout, u8 rf_tech, u8 mode) +{ + int rc; + struct sk_buff *skb; + + rc = wait_event_interruptible_timeout(link->recv_wait, + link->cond, + msecs_to_jiffies(timeout)); + + mutex_lock(&link->lock); + + skb = link->skb; + link->skb = NULL; + + if (!rc) { + rc = -ETIMEDOUT; + goto done; + } + + if (!skb || link->rf_tech != rf_tech || link->mode == mode) { + rc = -EINVAL; + goto done; + } + + if (link->shutdown) { + rc = -ENODEV; + goto done; + } + +done: + mutex_unlock(&link->lock); + + if (rc < 0) { + dev_kfree_skb(skb); + skb = ERR_PTR(rc); + } + + link->cond = 0; + + return skb; +} + +static void nfcsim_send_wq(struct work_struct *work) +{ + struct nfcsim *dev = container_of(work, struct nfcsim, send_work.work); + + /* + * To effectively send data, the device just wake up its link_out which + * is the link_in of the peer device. The exchanged skb has already been + * stored in the dev->link_out through nfcsim_link_set_skb(). + */ + nfcsim_link_recv_wake(dev->link_out); +} + +static void nfcsim_recv_wq(struct work_struct *work) +{ + struct nfcsim *dev = container_of(work, struct nfcsim, recv_work); + struct sk_buff *skb; + + skb = nfcsim_link_recv_skb(dev->link_in, dev->recv_timeout, + dev->rf_tech, dev->mode); + + if (!dev->up) { + NFCSIM_ERR(dev, "Device is down\n"); + + if (!IS_ERR(skb)) + dev_kfree_skb(skb); + + skb = ERR_PTR(-ENODEV); + } + + dev->cb(dev->nfc_digital_dev, dev->arg, skb); +} + +static int nfcsim_send(struct nfc_digital_dev *ddev, struct sk_buff *skb, + u16 timeout, nfc_digital_cmd_complete_t cb, void *arg) +{ + struct nfcsim *dev = nfc_digital_get_drvdata(ddev); + u8 delay; + + if (!dev->up) { + NFCSIM_ERR(dev, "Device is down\n"); + return -ENODEV; + } + + dev->recv_timeout = timeout; + dev->cb = cb; + dev->arg = arg; + + schedule_work(&dev->recv_work); + + if (dev->dropframe) { + NFCSIM_DBG(dev, "dropping frame (out of %d)\n", dev->dropframe); + dev_kfree_skb(skb); + dev->dropframe--; + + return 0; + } + + if (skb) { + nfcsim_link_set_skb(dev->link_out, skb, dev->rf_tech, + dev->mode); + + /* Add random delay (between 3 and 10 ms) before sending data */ + get_random_bytes(&delay, 1); + delay = 3 + (delay & 0x07); + + schedule_delayed_work(&dev->send_work, msecs_to_jiffies(delay)); + } + + return 0; +} + +static void nfcsim_abort_cmd(struct nfc_digital_dev *ddev) +{ + struct nfcsim *dev = nfc_digital_get_drvdata(ddev); + + nfcsim_link_recv_cancel(dev->link_in); +} + +static int nfcsim_switch_rf(struct nfc_digital_dev *ddev, bool on) +{ + struct nfcsim *dev = nfc_digital_get_drvdata(ddev); + + dev->up = on; + + return 0; +} + +static int nfcsim_in_configure_hw(struct nfc_digital_dev *ddev, + int type, int param) +{ + struct nfcsim *dev = nfc_digital_get_drvdata(ddev); + + switch (type) { + case NFC_DIGITAL_CONFIG_RF_TECH: + dev->up = true; + dev->mode = NFCSIM_MODE_INITIATOR; + dev->rf_tech = param; + break; + + case NFC_DIGITAL_CONFIG_FRAMING: + break; + + default: + NFCSIM_ERR(dev, "Invalid configuration type: %d\n", type); + return -EINVAL; + } + + return 0; +} + +static int nfcsim_in_send_cmd(struct nfc_digital_dev *ddev, + struct sk_buff *skb, u16 timeout, + nfc_digital_cmd_complete_t cb, void *arg) +{ + return nfcsim_send(ddev, skb, timeout, cb, arg); +} + +static int nfcsim_tg_configure_hw(struct nfc_digital_dev *ddev, + int type, int param) +{ + struct nfcsim *dev = nfc_digital_get_drvdata(ddev); + + switch (type) { + case NFC_DIGITAL_CONFIG_RF_TECH: + dev->up = true; + dev->mode = NFCSIM_MODE_TARGET; + dev->rf_tech = param; + break; + + case NFC_DIGITAL_CONFIG_FRAMING: + break; + + default: + NFCSIM_ERR(dev, "Invalid configuration type: %d\n", type); + return -EINVAL; + } + + return 0; +} + +static int nfcsim_tg_send_cmd(struct nfc_digital_dev *ddev, + struct sk_buff *skb, u16 timeout, + nfc_digital_cmd_complete_t cb, void *arg) +{ + return nfcsim_send(ddev, skb, timeout, cb, arg); +} + +static int nfcsim_tg_listen(struct nfc_digital_dev *ddev, u16 timeout, + nfc_digital_cmd_complete_t cb, void *arg) +{ + return nfcsim_send(ddev, NULL, timeout, cb, arg); +} + +static struct nfc_digital_ops nfcsim_digital_ops = { + .in_configure_hw = nfcsim_in_configure_hw, + .in_send_cmd = nfcsim_in_send_cmd, + + .tg_listen = nfcsim_tg_listen, + .tg_configure_hw = nfcsim_tg_configure_hw, + .tg_send_cmd = nfcsim_tg_send_cmd, + + .abort_cmd = nfcsim_abort_cmd, + .switch_rf = nfcsim_switch_rf, +}; + +static struct dentry *nfcsim_debugfs_root; + +static void nfcsim_debugfs_init(void) +{ + nfcsim_debugfs_root = debugfs_create_dir("nfcsim", NULL); + + if (!nfcsim_debugfs_root) + pr_err("Could not create debugfs entry\n"); + +} + +static void nfcsim_debugfs_remove(void) +{ + debugfs_remove_recursive(nfcsim_debugfs_root); +} + +static void nfcsim_debugfs_init_dev(struct nfcsim *dev) +{ + struct dentry *dev_dir; + char devname[5]; /* nfcX\0 */ + u32 idx; + int n; + + if (!nfcsim_debugfs_root) { + NFCSIM_ERR(dev, "nfcsim debugfs not initialized\n"); + return; + } + + idx = dev->nfc_digital_dev->nfc_dev->idx; + n = snprintf(devname, sizeof(devname), "nfc%d", idx); + if (n >= sizeof(devname)) { + NFCSIM_ERR(dev, "Could not compute dev name for dev %d\n", idx); + return; + } + + dev_dir = debugfs_create_dir(devname, nfcsim_debugfs_root); + if (!dev_dir) { + NFCSIM_ERR(dev, "Could not create debugfs entries for nfc%d\n", + idx); + return; + } + + debugfs_create_u8("dropframe", 0664, dev_dir, &dev->dropframe); +} + +static struct nfcsim *nfcsim_device_new(struct nfcsim_link *link_in, + struct nfcsim_link *link_out) +{ + struct nfcsim *dev; + int rc; + + dev = kzalloc(sizeof(struct nfcsim), GFP_KERNEL); + if (!dev) + return ERR_PTR(-ENOMEM); + + INIT_DELAYED_WORK(&dev->send_work, nfcsim_send_wq); + INIT_WORK(&dev->recv_work, nfcsim_recv_wq); + + dev->nfc_digital_dev = + nfc_digital_allocate_device(&nfcsim_digital_ops, + NFC_PROTO_NFC_DEP_MASK, + NFCSIM_CAPABILITIES, + 0, 0); + if (!dev->nfc_digital_dev) { + kfree(dev); + return ERR_PTR(-ENOMEM); + } + + nfc_digital_set_drvdata(dev->nfc_digital_dev, dev); + + dev->link_in = link_in; + dev->link_out = link_out; + + rc = nfc_digital_register_device(dev->nfc_digital_dev); + if (rc) { + pr_err("Could not register digital device (%d)\n", rc); + nfc_digital_free_device(dev->nfc_digital_dev); + kfree(dev); + + return ERR_PTR(rc); + } + + nfcsim_debugfs_init_dev(dev); + + return dev; +} + +static void nfcsim_device_free(struct nfcsim *dev) +{ + nfc_digital_unregister_device(dev->nfc_digital_dev); + + dev->up = false; + + nfcsim_link_shutdown(dev->link_in); + + cancel_delayed_work_sync(&dev->send_work); + cancel_work_sync(&dev->recv_work); + + nfc_digital_free_device(dev->nfc_digital_dev); + + kfree(dev); +} + +static struct nfcsim *dev0; +static struct nfcsim *dev1; + +static int __init nfcsim_init(void) +{ + struct nfcsim_link *link0, *link1; + int rc; + + link0 = nfcsim_link_new(); + link1 = nfcsim_link_new(); + if (!link0 || !link1) { + rc = -ENOMEM; + goto exit_err; + } + + nfcsim_debugfs_init(); + + dev0 = nfcsim_device_new(link0, link1); + if (IS_ERR(dev0)) { + rc = PTR_ERR(dev0); + goto exit_err; + } + + dev1 = nfcsim_device_new(link1, link0); + if (IS_ERR(dev1)) { + nfcsim_device_free(dev0); + + rc = PTR_ERR(dev1); + goto exit_err; + } + + pr_info("nfcsim " NFCSIM_VERSION " initialized\n"); + + return 0; + +exit_err: + pr_err("Failed to initialize nfcsim driver (%d)\n", rc); + + nfcsim_link_free(link0); + nfcsim_link_free(link1); + + return rc; +} + +static void __exit nfcsim_exit(void) +{ + struct nfcsim_link *link0, *link1; + + link0 = dev0->link_in; + link1 = dev0->link_out; + + nfcsim_device_free(dev0); + nfcsim_device_free(dev1); + + nfcsim_link_free(link0); + nfcsim_link_free(link1); + + nfcsim_debugfs_remove(); +} + +module_init(nfcsim_init); +module_exit(nfcsim_exit); + +MODULE_DESCRIPTION("NFCSim driver ver " NFCSIM_VERSION); +MODULE_VERSION(NFCSIM_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c new file mode 100644 index 0000000..3fbd18b --- /dev/null +++ b/drivers/nfc/nfcwilink.c @@ -0,0 +1,578 @@ +/* + * Texas Instrument's NFC Driver For Shared Transport. + * + * NFC Driver acts as interface between NCI core and + * TI Shared Transport Layer. + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * Written by Ilan Elias <ilane@ti.com> + * + * Acknowledgements: + * This file is based on btwilink.c, which was written + * by Raja Mani and Pavan Savoy. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/firmware.h> +#include <linux/nfc.h> +#include <net/nfc/nci.h> +#include <net/nfc/nci_core.h> +#include <linux/ti_wilink_st.h> + +#define NFCWILINK_CHNL 12 +#define NFCWILINK_OPCODE 7 +#define NFCWILINK_MAX_FRAME_SIZE 300 +#define NFCWILINK_HDR_LEN 4 +#define NFCWILINK_OFFSET_LEN_IN_HDR 1 +#define NFCWILINK_LEN_SIZE 2 +#define NFCWILINK_REGISTER_TIMEOUT 8000 /* 8 sec */ +#define NFCWILINK_CMD_TIMEOUT 5000 /* 5 sec */ + +#define BTS_FILE_NAME_MAX_SIZE 40 +#define BTS_FILE_HDR_MAGIC 0x42535442 +#define BTS_FILE_CMD_MAX_LEN 0xff +#define BTS_FILE_ACTION_TYPE_SEND_CMD 1 + +#define NCI_VS_NFCC_INFO_CMD_GID 0x2f +#define NCI_VS_NFCC_INFO_CMD_OID 0x12 +#define NCI_VS_NFCC_INFO_RSP_GID 0x4f +#define NCI_VS_NFCC_INFO_RSP_OID 0x12 + +struct nfcwilink_hdr { + __u8 chnl; + __u8 opcode; + __le16 len; +} __packed; + +struct nci_vs_nfcc_info_cmd { + __u8 gid; + __u8 oid; + __u8 plen; +} __packed; + +struct nci_vs_nfcc_info_rsp { + __u8 gid; + __u8 oid; + __u8 plen; + __u8 status; + __u8 hw_id; + __u8 sw_ver_x; + __u8 sw_ver_z; + __u8 patch_id; +} __packed; + +struct bts_file_hdr { + __le32 magic; + __le32 ver; + __u8 rfu[24]; + __u8 actions[0]; +} __packed; + +struct bts_file_action { + __le16 type; + __le16 len; + __u8 data[0]; +} __packed; + +struct nfcwilink { + struct platform_device *pdev; + struct nci_dev *ndev; + unsigned long flags; + + int st_register_cb_status; + long (*st_write) (struct sk_buff *); + + struct completion completed; + + struct nci_vs_nfcc_info_rsp nfcc_info; +}; + +/* NFCWILINK driver flags */ +enum { + NFCWILINK_RUNNING, + NFCWILINK_FW_DOWNLOAD, +}; + +static int nfcwilink_send(struct nci_dev *ndev, struct sk_buff *skb); + +static inline struct sk_buff *nfcwilink_skb_alloc(unsigned int len, gfp_t how) +{ + struct sk_buff *skb; + + skb = alloc_skb(len + NFCWILINK_HDR_LEN, how); + if (skb) + skb_reserve(skb, NFCWILINK_HDR_LEN); + + return skb; +} + +static void nfcwilink_fw_download_receive(struct nfcwilink *drv, + struct sk_buff *skb) +{ + struct nci_vs_nfcc_info_rsp *rsp = (void *)skb->data; + + /* Detect NCI_VS_NFCC_INFO_RSP and store the result */ + if ((skb->len > 3) && (rsp->gid == NCI_VS_NFCC_INFO_RSP_GID) && + (rsp->oid == NCI_VS_NFCC_INFO_RSP_OID)) { + memcpy(&drv->nfcc_info, rsp, + sizeof(struct nci_vs_nfcc_info_rsp)); + } + + kfree_skb(skb); + + complete(&drv->completed); +} + +static int nfcwilink_get_bts_file_name(struct nfcwilink *drv, char *file_name) +{ + struct nci_vs_nfcc_info_cmd *cmd; + struct sk_buff *skb; + unsigned long comp_ret; + int rc; + + skb = nfcwilink_skb_alloc(sizeof(struct nci_vs_nfcc_info_cmd), + GFP_KERNEL); + if (!skb) { + nfc_err(&drv->pdev->dev, + "no memory for nci_vs_nfcc_info_cmd\n"); + return -ENOMEM; + } + + cmd = (struct nci_vs_nfcc_info_cmd *) + skb_put(skb, sizeof(struct nci_vs_nfcc_info_cmd)); + cmd->gid = NCI_VS_NFCC_INFO_CMD_GID; + cmd->oid = NCI_VS_NFCC_INFO_CMD_OID; + cmd->plen = 0; + + drv->nfcc_info.plen = 0; + + rc = nfcwilink_send(drv->ndev, skb); + if (rc) + return rc; + + comp_ret = wait_for_completion_timeout(&drv->completed, + msecs_to_jiffies(NFCWILINK_CMD_TIMEOUT)); + dev_dbg(&drv->pdev->dev, "wait_for_completion_timeout returned %ld\n", + comp_ret); + if (comp_ret == 0) { + nfc_err(&drv->pdev->dev, + "timeout on wait_for_completion_timeout\n"); + return -ETIMEDOUT; + } + + dev_dbg(&drv->pdev->dev, "nci_vs_nfcc_info_rsp: plen %d, status %d\n", + drv->nfcc_info.plen, drv->nfcc_info.status); + + if ((drv->nfcc_info.plen != 5) || (drv->nfcc_info.status != 0)) { + nfc_err(&drv->pdev->dev, "invalid nci_vs_nfcc_info_rsp\n"); + return -EINVAL; + } + + snprintf(file_name, BTS_FILE_NAME_MAX_SIZE, + "TINfcInit_%d.%d.%d.%d.bts", + drv->nfcc_info.hw_id, + drv->nfcc_info.sw_ver_x, + drv->nfcc_info.sw_ver_z, + drv->nfcc_info.patch_id); + + nfc_info(&drv->pdev->dev, "nfcwilink FW file name: %s\n", file_name); + + return 0; +} + +static int nfcwilink_send_bts_cmd(struct nfcwilink *drv, __u8 *data, int len) +{ + struct nfcwilink_hdr *hdr = (struct nfcwilink_hdr *)data; + struct sk_buff *skb; + unsigned long comp_ret; + int rc; + + /* verify valid cmd for the NFC channel */ + if ((len <= sizeof(struct nfcwilink_hdr)) || + (len > BTS_FILE_CMD_MAX_LEN) || + (hdr->chnl != NFCWILINK_CHNL) || + (hdr->opcode != NFCWILINK_OPCODE)) { + nfc_err(&drv->pdev->dev, + "ignoring invalid bts cmd, len %d, chnl %d, opcode %d\n", + len, hdr->chnl, hdr->opcode); + return 0; + } + + /* remove the ST header */ + len -= sizeof(struct nfcwilink_hdr); + data += sizeof(struct nfcwilink_hdr); + + skb = nfcwilink_skb_alloc(len, GFP_KERNEL); + if (!skb) { + nfc_err(&drv->pdev->dev, "no memory for bts cmd\n"); + return -ENOMEM; + } + + memcpy(skb_put(skb, len), data, len); + + rc = nfcwilink_send(drv->ndev, skb); + if (rc) + return rc; + + comp_ret = wait_for_completion_timeout(&drv->completed, + msecs_to_jiffies(NFCWILINK_CMD_TIMEOUT)); + dev_dbg(&drv->pdev->dev, "wait_for_completion_timeout returned %ld\n", + comp_ret); + if (comp_ret == 0) { + nfc_err(&drv->pdev->dev, + "timeout on wait_for_completion_timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int nfcwilink_download_fw(struct nfcwilink *drv) +{ + unsigned char file_name[BTS_FILE_NAME_MAX_SIZE]; + const struct firmware *fw; + __u16 action_type, action_len; + __u8 *ptr; + int len, rc; + + set_bit(NFCWILINK_FW_DOWNLOAD, &drv->flags); + + rc = nfcwilink_get_bts_file_name(drv, file_name); + if (rc) + goto exit; + + rc = request_firmware(&fw, file_name, &drv->pdev->dev); + if (rc) { + nfc_err(&drv->pdev->dev, "request_firmware failed %d\n", rc); + + /* if the file is not found, don't exit with failure */ + if (rc == -ENOENT) + rc = 0; + + goto exit; + } + + len = fw->size; + ptr = (__u8 *)fw->data; + + if ((len == 0) || (ptr == NULL)) { + dev_dbg(&drv->pdev->dev, + "request_firmware returned size %d\n", len); + goto release_fw; + } + + if (__le32_to_cpu(((struct bts_file_hdr *)ptr)->magic) != + BTS_FILE_HDR_MAGIC) { + nfc_err(&drv->pdev->dev, "wrong bts magic number\n"); + rc = -EINVAL; + goto release_fw; + } + + /* remove the BTS header */ + len -= sizeof(struct bts_file_hdr); + ptr += sizeof(struct bts_file_hdr); + + while (len > 0) { + action_type = + __le16_to_cpu(((struct bts_file_action *)ptr)->type); + action_len = + __le16_to_cpu(((struct bts_file_action *)ptr)->len); + + dev_dbg(&drv->pdev->dev, "bts_file_action type %d, len %d\n", + action_type, action_len); + + switch (action_type) { + case BTS_FILE_ACTION_TYPE_SEND_CMD: + rc = nfcwilink_send_bts_cmd(drv, + ((struct bts_file_action *)ptr)->data, + action_len); + if (rc) + goto release_fw; + break; + } + + /* advance to the next action */ + len -= (sizeof(struct bts_file_action) + action_len); + ptr += (sizeof(struct bts_file_action) + action_len); + } + +release_fw: + release_firmware(fw); + +exit: + clear_bit(NFCWILINK_FW_DOWNLOAD, &drv->flags); + return rc; +} + +/* Called by ST when registration is complete */ +static void nfcwilink_register_complete(void *priv_data, int data) +{ + struct nfcwilink *drv = priv_data; + + /* store ST registration status */ + drv->st_register_cb_status = data; + + /* complete the wait in nfc_st_open() */ + complete(&drv->completed); +} + +/* Called by ST when receive data is available */ +static long nfcwilink_receive(void *priv_data, struct sk_buff *skb) +{ + struct nfcwilink *drv = priv_data; + int rc; + + if (!skb) + return -EFAULT; + + if (!drv) { + kfree_skb(skb); + return -EFAULT; + } + + dev_dbg(&drv->pdev->dev, "receive entry, len %d\n", skb->len); + + /* strip the ST header + (apart for the chnl byte, which is not received in the hdr) */ + skb_pull(skb, (NFCWILINK_HDR_LEN-1)); + + if (test_bit(NFCWILINK_FW_DOWNLOAD, &drv->flags)) { + nfcwilink_fw_download_receive(drv, skb); + return 0; + } + + /* Forward skb to NCI core layer */ + rc = nci_recv_frame(drv->ndev, skb); + if (rc < 0) { + nfc_err(&drv->pdev->dev, "nci_recv_frame failed %d\n", rc); + return rc; + } + + return 0; +} + +/* protocol structure registered with ST */ +static struct st_proto_s nfcwilink_proto = { + .chnl_id = NFCWILINK_CHNL, + .max_frame_size = NFCWILINK_MAX_FRAME_SIZE, + .hdr_len = (NFCWILINK_HDR_LEN-1), /* not including chnl byte */ + .offset_len_in_hdr = NFCWILINK_OFFSET_LEN_IN_HDR, + .len_size = NFCWILINK_LEN_SIZE, + .reserve = 0, + .recv = nfcwilink_receive, + .reg_complete_cb = nfcwilink_register_complete, + .write = NULL, +}; + +static int nfcwilink_open(struct nci_dev *ndev) +{ + struct nfcwilink *drv = nci_get_drvdata(ndev); + unsigned long comp_ret; + int rc; + + if (test_and_set_bit(NFCWILINK_RUNNING, &drv->flags)) { + rc = -EBUSY; + goto exit; + } + + nfcwilink_proto.priv_data = drv; + + init_completion(&drv->completed); + drv->st_register_cb_status = -EINPROGRESS; + + rc = st_register(&nfcwilink_proto); + if (rc < 0) { + if (rc == -EINPROGRESS) { + comp_ret = wait_for_completion_timeout( + &drv->completed, + msecs_to_jiffies(NFCWILINK_REGISTER_TIMEOUT)); + + dev_dbg(&drv->pdev->dev, + "wait_for_completion_timeout returned %ld\n", + comp_ret); + + if (comp_ret == 0) { + /* timeout */ + rc = -ETIMEDOUT; + goto clear_exit; + } else if (drv->st_register_cb_status != 0) { + rc = drv->st_register_cb_status; + nfc_err(&drv->pdev->dev, + "st_register_cb failed %d\n", rc); + goto clear_exit; + } + } else { + nfc_err(&drv->pdev->dev, "st_register failed %d\n", rc); + goto clear_exit; + } + } + + /* st_register MUST fill the write callback */ + BUG_ON(nfcwilink_proto.write == NULL); + drv->st_write = nfcwilink_proto.write; + + if (nfcwilink_download_fw(drv)) { + nfc_err(&drv->pdev->dev, "nfcwilink_download_fw failed %d\n", + rc); + /* open should succeed, even if the FW download failed */ + } + + goto exit; + +clear_exit: + clear_bit(NFCWILINK_RUNNING, &drv->flags); + +exit: + return rc; +} + +static int nfcwilink_close(struct nci_dev *ndev) +{ + struct nfcwilink *drv = nci_get_drvdata(ndev); + int rc; + + if (!test_and_clear_bit(NFCWILINK_RUNNING, &drv->flags)) + return 0; + + rc = st_unregister(&nfcwilink_proto); + if (rc) + nfc_err(&drv->pdev->dev, "st_unregister failed %d\n", rc); + + drv->st_write = NULL; + + return rc; +} + +static int nfcwilink_send(struct nci_dev *ndev, struct sk_buff *skb) +{ + struct nfcwilink *drv = nci_get_drvdata(ndev); + struct nfcwilink_hdr hdr = {NFCWILINK_CHNL, NFCWILINK_OPCODE, 0x0000}; + long len; + + dev_dbg(&drv->pdev->dev, "send entry, len %d\n", skb->len); + + if (!test_bit(NFCWILINK_RUNNING, &drv->flags)) { + kfree_skb(skb); + return -EINVAL; + } + + /* add the ST hdr to the start of the buffer */ + hdr.len = cpu_to_le16(skb->len); + memcpy(skb_push(skb, NFCWILINK_HDR_LEN), &hdr, NFCWILINK_HDR_LEN); + + /* Insert skb to shared transport layer's transmit queue. + * Freeing skb memory is taken care in shared transport layer, + * so don't free skb memory here. + */ + len = drv->st_write(skb); + if (len < 0) { + kfree_skb(skb); + nfc_err(&drv->pdev->dev, "st_write failed %ld\n", len); + return -EFAULT; + } + + return 0; +} + +static struct nci_ops nfcwilink_ops = { + .open = nfcwilink_open, + .close = nfcwilink_close, + .send = nfcwilink_send, +}; + +static int nfcwilink_probe(struct platform_device *pdev) +{ + struct nfcwilink *drv; + int rc; + __u32 protocols; + + drv = devm_kzalloc(&pdev->dev, sizeof(struct nfcwilink), GFP_KERNEL); + if (!drv) { + rc = -ENOMEM; + goto exit; + } + + drv->pdev = pdev; + + protocols = NFC_PROTO_JEWEL_MASK + | NFC_PROTO_MIFARE_MASK | NFC_PROTO_FELICA_MASK + | NFC_PROTO_ISO14443_MASK + | NFC_PROTO_ISO14443_B_MASK + | NFC_PROTO_NFC_DEP_MASK; + + drv->ndev = nci_allocate_device(&nfcwilink_ops, + protocols, + NFCWILINK_HDR_LEN, + 0); + if (!drv->ndev) { + nfc_err(&pdev->dev, "nci_allocate_device failed\n"); + rc = -ENOMEM; + goto exit; + } + + nci_set_parent_dev(drv->ndev, &pdev->dev); + nci_set_drvdata(drv->ndev, drv); + + rc = nci_register_device(drv->ndev); + if (rc < 0) { + nfc_err(&pdev->dev, "nci_register_device failed %d\n", rc); + goto free_dev_exit; + } + + dev_set_drvdata(&pdev->dev, drv); + + goto exit; + +free_dev_exit: + nci_free_device(drv->ndev); + +exit: + return rc; +} + +static int nfcwilink_remove(struct platform_device *pdev) +{ + struct nfcwilink *drv = dev_get_drvdata(&pdev->dev); + struct nci_dev *ndev; + + if (!drv) + return -EFAULT; + + ndev = drv->ndev; + + nci_unregister_device(ndev); + nci_free_device(ndev); + + return 0; +} + +static struct platform_driver nfcwilink_driver = { + .probe = nfcwilink_probe, + .remove = nfcwilink_remove, + .driver = { + .name = "nfcwilink", + }, +}; + +module_platform_driver(nfcwilink_driver); + +/* ------ Module Info ------ */ + +MODULE_AUTHOR("Ilan Elias <ilane@ti.com>"); +MODULE_DESCRIPTION("NFC Driver for TI Shared Transport"); +MODULE_LICENSE("GPL"); diff --git a/drivers/nfc/nxp-nci/Kconfig b/drivers/nfc/nxp-nci/Kconfig new file mode 100644 index 0000000..208b5a9 --- /dev/null +++ b/drivers/nfc/nxp-nci/Kconfig @@ -0,0 +1,28 @@ +config NFC_NXP_NCI + tristate "NXP-NCI NFC driver" + depends on m + depends on NFC_NCI + default n + ---help--- + Generic core driver for NXP NCI chips such as the NPC100 + or PN7150 families. + This is a driver based on the NCI NFC kernel layers and + will thus not work with NXP libnfc library. + + To compile this driver as a module, choose m here. The module will + be called nxp_nci. + Say N if unsure. + +config NFC_NXP_NCI_I2C + depends on !KERNEL_3_17 + tristate "NXP-NCI I2C support" + depends on m + depends on NFC_NXP_NCI && I2C + ---help--- + This module adds support for an I2C interface to the NXP NCI + chips. + Select this if your platform is using the I2C bus. + + To compile this driver as a module, choose m here. The module will + be called nxp_nci_i2c. + Say Y if unsure. diff --git a/drivers/nfc/nxp-nci/Makefile b/drivers/nfc/nxp-nci/Makefile new file mode 100644 index 0000000..1315767 --- /dev/null +++ b/drivers/nfc/nxp-nci/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for NXP-NCI NFC driver +# + +nxp-nci-objs = core.o firmware.o +nxp-nci_i2c-objs = i2c.o + +obj-$(CPTCFG_NFC_NXP_NCI) += nxp-nci.o +obj-$(CPTCFG_NFC_NXP_NCI_I2C) += nxp-nci_i2c.o diff --git a/drivers/nfc/nxp-nci/core.c b/drivers/nfc/nxp-nci/core.c new file mode 100644 index 0000000..2e4b004 --- /dev/null +++ b/drivers/nfc/nxp-nci/core.c @@ -0,0 +1,187 @@ +/* + * Generic driver for NXP NCI NFC chips + * + * Copyright (C) 2014 NXP Semiconductors All rights reserved. + * + * Authors: Clément Perrochaud <clement.perrochaud@nxp.com> + * + * Derived from PN544 device driver: + * Copyright (C) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/nfc.h> +#include <linux/platform_data/nxp-nci.h> + +#include <net/nfc/nci_core.h> + +#include "nxp-nci.h" + +#define NXP_NCI_HDR_LEN 4 + +#define NXP_NCI_NFC_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \ + NFC_PROTO_MIFARE_MASK | \ + NFC_PROTO_FELICA_MASK | \ + NFC_PROTO_ISO14443_MASK | \ + NFC_PROTO_ISO14443_B_MASK | \ + NFC_PROTO_NFC_DEP_MASK) + +static int nxp_nci_open(struct nci_dev *ndev) +{ + struct nxp_nci_info *info = nci_get_drvdata(ndev); + int r = 0; + + mutex_lock(&info->info_lock); + + if (info->mode != NXP_NCI_MODE_COLD) { + r = -EBUSY; + goto open_exit; + } + + if (info->phy_ops->set_mode) + r = info->phy_ops->set_mode(info->phy_id, NXP_NCI_MODE_NCI); + + info->mode = NXP_NCI_MODE_NCI; + +open_exit: + mutex_unlock(&info->info_lock); + return r; +} + +static int nxp_nci_close(struct nci_dev *ndev) +{ + struct nxp_nci_info *info = nci_get_drvdata(ndev); + int r = 0; + + mutex_lock(&info->info_lock); + + if (info->phy_ops->set_mode) + r = info->phy_ops->set_mode(info->phy_id, NXP_NCI_MODE_COLD); + + info->mode = NXP_NCI_MODE_COLD; + + mutex_unlock(&info->info_lock); + return r; +} + +static int nxp_nci_send(struct nci_dev *ndev, struct sk_buff *skb) +{ + struct nxp_nci_info *info = nci_get_drvdata(ndev); + int r; + + if (!info->phy_ops->write) { + r = -ENOTSUPP; + goto send_exit; + } + + if (info->mode != NXP_NCI_MODE_NCI) { + r = -EINVAL; + goto send_exit; + } + + r = info->phy_ops->write(info->phy_id, skb); + if (r < 0) + kfree_skb(skb); + +send_exit: + return r; +} + +static struct nci_ops nxp_nci_ops = { + .open = nxp_nci_open, + .close = nxp_nci_close, + .send = nxp_nci_send, + .fw_download = nxp_nci_fw_download, +}; + +int nxp_nci_probe(void *phy_id, struct device *pdev, + const struct nxp_nci_phy_ops *phy_ops, + unsigned int max_payload, + struct nci_dev **ndev) +{ + struct nxp_nci_info *info; + int r; + + info = devm_kzalloc(pdev, sizeof(struct nxp_nci_info), GFP_KERNEL); + if (!info) { + r = -ENOMEM; + goto probe_exit; + } + + info->phy_id = phy_id; + info->pdev = pdev; + info->phy_ops = phy_ops; + info->max_payload = max_payload; + INIT_WORK(&info->fw_info.work, nxp_nci_fw_work); + init_completion(&info->fw_info.cmd_completion); + mutex_init(&info->info_lock); + + if (info->phy_ops->set_mode) { + r = info->phy_ops->set_mode(info->phy_id, NXP_NCI_MODE_COLD); + if (r < 0) + goto probe_exit; + } + + info->mode = NXP_NCI_MODE_COLD; + + info->ndev = nci_allocate_device(&nxp_nci_ops, NXP_NCI_NFC_PROTOCOLS, + NXP_NCI_HDR_LEN, 0); + if (!info->ndev) { + r = -ENOMEM; + goto probe_exit; + } + + nci_set_parent_dev(info->ndev, pdev); + nci_set_drvdata(info->ndev, info); + r = nci_register_device(info->ndev); + if (r < 0) + goto probe_exit_free_nci; + + *ndev = info->ndev; + + goto probe_exit; + +probe_exit_free_nci: + nci_free_device(info->ndev); +probe_exit: + return r; +} +EXPORT_SYMBOL(nxp_nci_probe); + +void nxp_nci_remove(struct nci_dev *ndev) +{ + struct nxp_nci_info *info = nci_get_drvdata(ndev); + + if (info->mode == NXP_NCI_MODE_FW) + nxp_nci_fw_work_complete(info, -ESHUTDOWN); + cancel_work_sync(&info->fw_info.work); + + mutex_lock(&info->info_lock); + + if (info->phy_ops->set_mode) + info->phy_ops->set_mode(info->phy_id, NXP_NCI_MODE_COLD); + + nci_unregister_device(ndev); + nci_free_device(ndev); + + mutex_unlock(&info->info_lock); +} +EXPORT_SYMBOL(nxp_nci_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("NXP NCI NFC driver"); +MODULE_AUTHOR("Clément Perrochaud <clement.perrochaud@nxp.com>"); diff --git a/drivers/nfc/nxp-nci/firmware.c b/drivers/nfc/nxp-nci/firmware.c new file mode 100644 index 0000000..5291797 --- /dev/null +++ b/drivers/nfc/nxp-nci/firmware.c @@ -0,0 +1,325 @@ +/* + * Generic driver for NXP NCI NFC chips + * + * Copyright (C) 2014 NXP Semiconductors All rights reserved. + * + * Author: Clément Perrochaud <clement.perrochaud@nxp.com> + * + * Derived from PN544 device driver: + * Copyright (C) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/completion.h> +#include <linux/firmware.h> +#include <linux/nfc.h> +#include <linux/unaligned/access_ok.h> + +#include "nxp-nci.h" + +/* Crypto operations can take up to 30 seconds */ +#define NXP_NCI_FW_ANSWER_TIMEOUT msecs_to_jiffies(30000) + +#define NXP_NCI_FW_CMD_RESET 0xF0 +#define NXP_NCI_FW_CMD_GETVERSION 0xF1 +#define NXP_NCI_FW_CMD_CHECKINTEGRITY 0xE0 +#define NXP_NCI_FW_CMD_WRITE 0xC0 +#define NXP_NCI_FW_CMD_READ 0xA2 +#define NXP_NCI_FW_CMD_GETSESSIONSTATE 0xF2 +#define NXP_NCI_FW_CMD_LOG 0xA7 +#define NXP_NCI_FW_CMD_FORCE 0xD0 +#define NXP_NCI_FW_CMD_GET_DIE_ID 0xF4 + +#define NXP_NCI_FW_CHUNK_FLAG 0x0400 + +#define NXP_NCI_FW_RESULT_OK 0x00 +#define NXP_NCI_FW_RESULT_INVALID_ADDR 0x01 +#define NXP_NCI_FW_RESULT_GENERIC_ERROR 0x02 +#define NXP_NCI_FW_RESULT_UNKNOWN_CMD 0x0B +#define NXP_NCI_FW_RESULT_ABORTED_CMD 0x0C +#define NXP_NCI_FW_RESULT_PLL_ERROR 0x0D +#define NXP_NCI_FW_RESULT_ADDR_RANGE_OFL_ERROR 0x1E +#define NXP_NCI_FW_RESULT_BUFFER_OFL_ERROR 0x1F +#define NXP_NCI_FW_RESULT_MEM_BSY 0x20 +#define NXP_NCI_FW_RESULT_SIGNATURE_ERROR 0x21 +#define NXP_NCI_FW_RESULT_FIRMWARE_VERSION_ERROR 0x24 +#define NXP_NCI_FW_RESULT_PROTOCOL_ERROR 0x28 +#define NXP_NCI_FW_RESULT_SFWU_DEGRADED 0x2A +#define NXP_NCI_FW_RESULT_PH_STATUS_FIRST_CHUNK 0x2D +#define NXP_NCI_FW_RESULT_PH_STATUS_NEXT_CHUNK 0x2E +#define NXP_NCI_FW_RESULT_PH_STATUS_INTERNAL_ERROR_5 0xC5 + +void nxp_nci_fw_work_complete(struct nxp_nci_info *info, int result) +{ + struct nxp_nci_fw_info *fw_info = &info->fw_info; + int r; + + if (info->phy_ops->set_mode) { + r = info->phy_ops->set_mode(info->phy_id, NXP_NCI_MODE_COLD); + if (r < 0 && result == 0) + result = -r; + } + + info->mode = NXP_NCI_MODE_COLD; + + if (fw_info->fw) { + release_firmware(fw_info->fw); + fw_info->fw = NULL; + } + + nfc_fw_download_done(info->ndev->nfc_dev, fw_info->name, (u32) -result); +} + +/* crc_ccitt cannot be used since it is computed MSB first and not LSB first */ +static u16 nxp_nci_fw_crc(u8 const *buffer, size_t len) +{ + u16 crc = 0xffff; + + while (len--) { + crc = ((crc >> 8) | (crc << 8)) ^ *buffer++; + crc ^= (crc & 0xff) >> 4; + crc ^= (crc & 0xff) << 12; + crc ^= (crc & 0xff) << 5; + } + + return crc; +} + +static int nxp_nci_fw_send_chunk(struct nxp_nci_info *info) +{ + struct nxp_nci_fw_info *fw_info = &info->fw_info; + u16 header, crc; + struct sk_buff *skb; + size_t chunk_len; + size_t remaining_len; + int r; + + skb = nci_skb_alloc(info->ndev, info->max_payload, GFP_KERNEL); + if (!skb) { + r = -ENOMEM; + goto chunk_exit; + } + + chunk_len = info->max_payload - NXP_NCI_FW_HDR_LEN - NXP_NCI_FW_CRC_LEN; + remaining_len = fw_info->frame_size - fw_info->written; + + if (remaining_len > chunk_len) { + header = NXP_NCI_FW_CHUNK_FLAG; + } else { + chunk_len = remaining_len; + header = 0x0000; + } + + header |= chunk_len & NXP_NCI_FW_FRAME_LEN_MASK; + put_unaligned_be16(header, skb_put(skb, NXP_NCI_FW_HDR_LEN)); + + memcpy(skb_put(skb, chunk_len), fw_info->data + fw_info->written, + chunk_len); + + crc = nxp_nci_fw_crc(skb->data, chunk_len + NXP_NCI_FW_HDR_LEN); + put_unaligned_be16(crc, skb_put(skb, NXP_NCI_FW_CRC_LEN)); + + r = info->phy_ops->write(info->phy_id, skb); + if (r >= 0) + r = chunk_len; + + kfree_skb(skb); + +chunk_exit: + return r; +} + +static int nxp_nci_fw_send(struct nxp_nci_info *info) +{ + struct nxp_nci_fw_info *fw_info = &info->fw_info; + long completion_rc; + int r; + + reinit_completion(&fw_info->cmd_completion); + + if (fw_info->written == 0) { + fw_info->frame_size = get_unaligned_be16(fw_info->data) & + NXP_NCI_FW_FRAME_LEN_MASK; + fw_info->data += NXP_NCI_FW_HDR_LEN; + fw_info->size -= NXP_NCI_FW_HDR_LEN; + } + + if (fw_info->frame_size > fw_info->size) + return -EMSGSIZE; + + r = nxp_nci_fw_send_chunk(info); + if (r < 0) + return r; + + fw_info->written += r; + + if (*fw_info->data == NXP_NCI_FW_CMD_RESET) { + fw_info->cmd_result = 0; + if (fw_info->fw) + schedule_work(&fw_info->work); + } else { + completion_rc = wait_for_completion_interruptible_timeout( + &fw_info->cmd_completion, NXP_NCI_FW_ANSWER_TIMEOUT); + if (completion_rc == 0) + return -ETIMEDOUT; + } + + return 0; +} + +void nxp_nci_fw_work(struct work_struct *work) +{ + struct nxp_nci_info *info; + struct nxp_nci_fw_info *fw_info; + int r; + + fw_info = container_of(work, struct nxp_nci_fw_info, work); + info = container_of(fw_info, struct nxp_nci_info, fw_info); + + mutex_lock(&info->info_lock); + + r = fw_info->cmd_result; + if (r < 0) + goto exit_work; + + if (fw_info->written == fw_info->frame_size) { + fw_info->data += fw_info->frame_size; + fw_info->size -= fw_info->frame_size; + fw_info->written = 0; + } + + if (fw_info->size > 0) + r = nxp_nci_fw_send(info); + +exit_work: + if (r < 0 || fw_info->size == 0) + nxp_nci_fw_work_complete(info, r); + mutex_unlock(&info->info_lock); +} + +int nxp_nci_fw_download(struct nci_dev *ndev, const char *firmware_name) +{ + struct nxp_nci_info *info = nci_get_drvdata(ndev); + struct nxp_nci_fw_info *fw_info = &info->fw_info; + int r; + + mutex_lock(&info->info_lock); + + if (!info->phy_ops->set_mode || !info->phy_ops->write) { + r = -ENOTSUPP; + goto fw_download_exit; + } + + if (!firmware_name || firmware_name[0] == '\0') { + r = -EINVAL; + goto fw_download_exit; + } + + strcpy(fw_info->name, firmware_name); + + r = request_firmware(&fw_info->fw, firmware_name, + ndev->nfc_dev->dev.parent); + if (r < 0) + goto fw_download_exit; + + r = info->phy_ops->set_mode(info->phy_id, NXP_NCI_MODE_FW); + if (r < 0) { + release_firmware(fw_info->fw); + goto fw_download_exit; + } + + info->mode = NXP_NCI_MODE_FW; + + fw_info->data = fw_info->fw->data; + fw_info->size = fw_info->fw->size; + fw_info->written = 0; + fw_info->frame_size = 0; + fw_info->cmd_result = 0; + + schedule_work(&fw_info->work); + +fw_download_exit: + mutex_unlock(&info->info_lock); + return r; +} + +static int nxp_nci_fw_read_status(u8 stat) +{ + switch (stat) { + case NXP_NCI_FW_RESULT_OK: + return 0; + case NXP_NCI_FW_RESULT_INVALID_ADDR: + return -EINVAL; + case NXP_NCI_FW_RESULT_UNKNOWN_CMD: + return -EINVAL; + case NXP_NCI_FW_RESULT_ABORTED_CMD: + return -EMSGSIZE; + case NXP_NCI_FW_RESULT_ADDR_RANGE_OFL_ERROR: + return -EADDRNOTAVAIL; + case NXP_NCI_FW_RESULT_BUFFER_OFL_ERROR: + return -ENOBUFS; + case NXP_NCI_FW_RESULT_MEM_BSY: + return -ENOKEY; + case NXP_NCI_FW_RESULT_SIGNATURE_ERROR: + return -EKEYREJECTED; + case NXP_NCI_FW_RESULT_FIRMWARE_VERSION_ERROR: + return -EALREADY; + case NXP_NCI_FW_RESULT_PROTOCOL_ERROR: + return -EPROTO; + case NXP_NCI_FW_RESULT_SFWU_DEGRADED: + return -EHWPOISON; + case NXP_NCI_FW_RESULT_PH_STATUS_FIRST_CHUNK: + return 0; + case NXP_NCI_FW_RESULT_PH_STATUS_NEXT_CHUNK: + return 0; + case NXP_NCI_FW_RESULT_PH_STATUS_INTERNAL_ERROR_5: + return -EINVAL; + default: + return -EIO; + } +} + +static u16 nxp_nci_fw_check_crc(struct sk_buff *skb) +{ + u16 crc, frame_crc; + size_t len = skb->len - NXP_NCI_FW_CRC_LEN; + + crc = nxp_nci_fw_crc(skb->data, len); + frame_crc = get_unaligned_be16(skb->data + len); + + return (crc ^ frame_crc); +} + +void nxp_nci_fw_recv_frame(struct nci_dev *ndev, struct sk_buff *skb) +{ + struct nxp_nci_info *info = nci_get_drvdata(ndev); + struct nxp_nci_fw_info *fw_info = &info->fw_info; + + complete(&fw_info->cmd_completion); + + if (skb) { + if (nxp_nci_fw_check_crc(skb) != 0x00) + fw_info->cmd_result = -EBADMSG; + else + fw_info->cmd_result = nxp_nci_fw_read_status( + *skb_pull(skb, NXP_NCI_FW_HDR_LEN)); + kfree_skb(skb); + } else { + fw_info->cmd_result = -EIO; + } + + if (fw_info->fw) + schedule_work(&fw_info->work); +} +EXPORT_SYMBOL(nxp_nci_fw_recv_frame); diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c new file mode 100644 index 0000000..36099e5 --- /dev/null +++ b/drivers/nfc/nxp-nci/i2c.c @@ -0,0 +1,434 @@ +/* + * I2C link layer for the NXP NCI driver + * + * Copyright (C) 2014 NXP Semiconductors All rights reserved. + * Copyright (C) 2012-2015 Intel Corporation. All rights reserved. + * + * Authors: Clément Perrochaud <clement.perrochaud@nxp.com> + * Authors: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com> + * + * Derived from PN544 device driver: + * Copyright (C) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/nfc.h> +#include <linux/gpio/consumer.h> +#include <linux/of_gpio.h> +#include <linux/of_irq.h> +#include <linux/platform_data/nxp-nci.h> +#include <linux/unaligned/access_ok.h> + +#include <net/nfc/nfc.h> + +#include "nxp-nci.h" + +#define NXP_NCI_I2C_DRIVER_NAME "nxp-nci_i2c" + +#define NXP_NCI_I2C_MAX_PAYLOAD 32 + +struct nxp_nci_i2c_phy { + struct i2c_client *i2c_dev; + struct nci_dev *ndev; + + unsigned int gpio_en; + unsigned int gpio_fw; + + int hard_fault; /* + * < 0 if hardware error occurred (e.g. i2c err) + * and prevents normal operation. + */ +}; + +static int nxp_nci_i2c_set_mode(void *phy_id, + enum nxp_nci_mode mode) +{ + struct nxp_nci_i2c_phy *phy = (struct nxp_nci_i2c_phy *) phy_id; + + gpio_set_value(phy->gpio_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0); + gpio_set_value(phy->gpio_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0); + usleep_range(10000, 15000); + + if (mode == NXP_NCI_MODE_COLD) + phy->hard_fault = 0; + + return 0; +} + +static int nxp_nci_i2c_write(void *phy_id, struct sk_buff *skb) +{ + int r; + struct nxp_nci_i2c_phy *phy = phy_id; + struct i2c_client *client = phy->i2c_dev; + + if (phy->hard_fault != 0) + return phy->hard_fault; + + r = i2c_master_send(client, skb->data, skb->len); + if (r < 0) { + /* Retry, chip was in standby */ + usleep_range(110000, 120000); + r = i2c_master_send(client, skb->data, skb->len); + } + + if (r < 0) { + nfc_err(&client->dev, "Error %d on I2C send\n", r); + } else if (r != skb->len) { + nfc_err(&client->dev, + "Invalid length sent: %u (expected %u)\n", + r, skb->len); + r = -EREMOTEIO; + } else { + /* Success but return 0 and not number of bytes */ + r = 0; + } + + return r; +} + +static const struct nxp_nci_phy_ops i2c_phy_ops = { + .set_mode = nxp_nci_i2c_set_mode, + .write = nxp_nci_i2c_write, +}; + +static int nxp_nci_i2c_fw_read(struct nxp_nci_i2c_phy *phy, + struct sk_buff **skb) +{ + struct i2c_client *client = phy->i2c_dev; + u16 header; + size_t frame_len; + int r; + + r = i2c_master_recv(client, (u8 *) &header, NXP_NCI_FW_HDR_LEN); + if (r < 0) { + goto fw_read_exit; + } else if (r != NXP_NCI_FW_HDR_LEN) { + nfc_err(&client->dev, "Incorrect header length: %u\n", r); + r = -EBADMSG; + goto fw_read_exit; + } + + frame_len = (get_unaligned_be16(&header) & NXP_NCI_FW_FRAME_LEN_MASK) + + NXP_NCI_FW_CRC_LEN; + + *skb = alloc_skb(NXP_NCI_FW_HDR_LEN + frame_len, GFP_KERNEL); + if (*skb == NULL) { + r = -ENOMEM; + goto fw_read_exit; + } + + memcpy(skb_put(*skb, NXP_NCI_FW_HDR_LEN), &header, NXP_NCI_FW_HDR_LEN); + + r = i2c_master_recv(client, skb_put(*skb, frame_len), frame_len); + if (r != frame_len) { + nfc_err(&client->dev, + "Invalid frame length: %u (expected %zu)\n", + r, frame_len); + r = -EBADMSG; + goto fw_read_exit_free_skb; + } + + return 0; + +fw_read_exit_free_skb: + kfree_skb(*skb); +fw_read_exit: + return r; +} + +static int nxp_nci_i2c_nci_read(struct nxp_nci_i2c_phy *phy, + struct sk_buff **skb) +{ + struct nci_ctrl_hdr header; /* May actually be a data header */ + struct i2c_client *client = phy->i2c_dev; + int r; + + r = i2c_master_recv(client, (u8 *) &header, NCI_CTRL_HDR_SIZE); + if (r < 0) { + goto nci_read_exit; + } else if (r != NCI_CTRL_HDR_SIZE) { + nfc_err(&client->dev, "Incorrect header length: %u\n", r); + r = -EBADMSG; + goto nci_read_exit; + } + + *skb = alloc_skb(NCI_CTRL_HDR_SIZE + header.plen, GFP_KERNEL); + if (*skb == NULL) { + r = -ENOMEM; + goto nci_read_exit; + } + + memcpy(skb_put(*skb, NCI_CTRL_HDR_SIZE), (void *) &header, + NCI_CTRL_HDR_SIZE); + + r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen); + if (r != header.plen) { + nfc_err(&client->dev, + "Invalid frame payload length: %u (expected %u)\n", + r, header.plen); + r = -EBADMSG; + goto nci_read_exit_free_skb; + } + + return 0; + +nci_read_exit_free_skb: + kfree_skb(*skb); +nci_read_exit: + return r; +} + +static irqreturn_t nxp_nci_i2c_irq_thread_fn(int irq, void *phy_id) +{ + struct nxp_nci_i2c_phy *phy = phy_id; + struct i2c_client *client; + struct nxp_nci_info *info; + + struct sk_buff *skb = NULL; + int r = 0; + + if (!phy || !phy->ndev) + goto exit_irq_none; + + client = phy->i2c_dev; + + if (!client || irq != client->irq) + goto exit_irq_none; + + info = nci_get_drvdata(phy->ndev); + + if (!info) + goto exit_irq_none; + + mutex_lock(&info->info_lock); + + if (phy->hard_fault != 0) + goto exit_irq_handled; + + switch (info->mode) { + case NXP_NCI_MODE_NCI: + r = nxp_nci_i2c_nci_read(phy, &skb); + break; + case NXP_NCI_MODE_FW: + r = nxp_nci_i2c_fw_read(phy, &skb); + break; + case NXP_NCI_MODE_COLD: + r = -EREMOTEIO; + break; + } + + if (r == -EREMOTEIO) { + phy->hard_fault = r; + skb = NULL; + } else if (r < 0) { + nfc_err(&client->dev, "Read failed with error %d\n", r); + goto exit_irq_handled; + } + + switch (info->mode) { + case NXP_NCI_MODE_NCI: + nci_recv_frame(phy->ndev, skb); + break; + case NXP_NCI_MODE_FW: + nxp_nci_fw_recv_frame(phy->ndev, skb); + break; + case NXP_NCI_MODE_COLD: + break; + } + +exit_irq_handled: + mutex_unlock(&info->info_lock); + return IRQ_HANDLED; +exit_irq_none: + WARN_ON_ONCE(1); + return IRQ_NONE; +} + +static int nxp_nci_i2c_parse_devtree(struct i2c_client *client) +{ + struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client); + struct device_node *pp; + int r; + + pp = client->dev.of_node; + if (!pp) + return -ENODEV; + + r = of_get_named_gpio(pp, "enable-gpios", 0); + if (r == -EPROBE_DEFER) + r = of_get_named_gpio(pp, "enable-gpios", 0); + if (r < 0) { + nfc_err(&client->dev, "Failed to get EN gpio, error: %d\n", r); + return r; + } + phy->gpio_en = r; + + r = of_get_named_gpio(pp, "firmware-gpios", 0); + if (r == -EPROBE_DEFER) + r = of_get_named_gpio(pp, "firmware-gpios", 0); + if (r < 0) { + nfc_err(&client->dev, "Failed to get FW gpio, error: %d\n", r); + return r; + } + phy->gpio_fw = r; + + return 0; +} + +static int nxp_nci_i2c_acpi_config(struct nxp_nci_i2c_phy *phy) +{ + struct i2c_client *client = phy->i2c_dev; + struct gpio_desc *gpiod_en, *gpiod_fw; + + gpiod_en = devm_gpiod_get_index(&client->dev, NULL, 2, GPIOD_OUT_LOW); + gpiod_fw = devm_gpiod_get_index(&client->dev, NULL, 1, GPIOD_OUT_LOW); + + if (IS_ERR(gpiod_en) || IS_ERR(gpiod_fw)) { + nfc_err(&client->dev, "No GPIOs\n"); + return -EINVAL; + } + + phy->gpio_en = desc_to_gpio(gpiod_en); + phy->gpio_fw = desc_to_gpio(gpiod_fw); + + return 0; +} + +static int nxp_nci_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct nxp_nci_i2c_phy *phy; + struct nxp_nci_nfc_platform_data *pdata; + int r; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + nfc_err(&client->dev, "Need I2C_FUNC_I2C\n"); + r = -ENODEV; + goto probe_exit; + } + + phy = devm_kzalloc(&client->dev, sizeof(struct nxp_nci_i2c_phy), + GFP_KERNEL); + if (!phy) { + r = -ENOMEM; + goto probe_exit; + } + + phy->i2c_dev = client; + i2c_set_clientdata(client, phy); + + pdata = client->dev.platform_data; + + if (!pdata && client->dev.of_node) { + r = nxp_nci_i2c_parse_devtree(client); + if (r < 0) { + nfc_err(&client->dev, "Failed to get DT data\n"); + goto probe_exit; + } + } else if (pdata) { + phy->gpio_en = pdata->gpio_en; + phy->gpio_fw = pdata->gpio_fw; + } else if (ACPI_HANDLE(&client->dev)) { + r = nxp_nci_i2c_acpi_config(phy); + if (r < 0) + goto probe_exit; + goto nci_probe; + } else { + nfc_err(&client->dev, "No platform data\n"); + r = -EINVAL; + goto probe_exit; + } + + r = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en, + GPIOF_OUT_INIT_LOW, "nxp_nci_en"); + if (r < 0) + goto probe_exit; + + r = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw, + GPIOF_OUT_INIT_LOW, "nxp_nci_fw"); + if (r < 0) + goto probe_exit; + +nci_probe: + r = nxp_nci_probe(phy, &client->dev, &i2c_phy_ops, + NXP_NCI_I2C_MAX_PAYLOAD, &phy->ndev); + if (r < 0) + goto probe_exit; + + r = request_threaded_irq(client->irq, NULL, + nxp_nci_i2c_irq_thread_fn, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + NXP_NCI_I2C_DRIVER_NAME, phy); + if (r < 0) + nfc_err(&client->dev, "Unable to register IRQ handler\n"); + +probe_exit: + return r; +} + +static int nxp_nci_i2c_remove(struct i2c_client *client) +{ + struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client); + + nxp_nci_remove(phy->ndev); + free_irq(client->irq, phy); + + return 0; +} + +static struct i2c_device_id nxp_nci_i2c_id_table[] = { + {"nxp-nci_i2c", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, nxp_nci_i2c_id_table); + +static const struct of_device_id of_nxp_nci_i2c_match[] = { + { .compatible = "nxp,nxp-nci-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_nxp_nci_i2c_match); + +#ifdef CONFIG_ACPI +static struct acpi_device_id acpi_id[] = { + { "NXP7471" }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, acpi_id); +#endif + +static struct i2c_driver nxp_nci_i2c_driver = { + .driver = { + .name = NXP_NCI_I2C_DRIVER_NAME, + .acpi_match_table = ACPI_PTR(acpi_id), + .of_match_table = of_match_ptr(of_nxp_nci_i2c_match), + }, + .probe = nxp_nci_i2c_probe, + .id_table = nxp_nci_i2c_id_table, + .remove = nxp_nci_i2c_remove, +}; + +module_i2c_driver(nxp_nci_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("I2C driver for NXP NCI NFC controllers"); +MODULE_AUTHOR("Clément Perrochaud <clement.perrochaud@nxp.com>"); +MODULE_AUTHOR("Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>"); diff --git a/drivers/nfc/nxp-nci/nxp-nci.h b/drivers/nfc/nxp-nci/nxp-nci.h new file mode 100644 index 0000000..20408cb --- /dev/null +++ b/drivers/nfc/nxp-nci/nxp-nci.h @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2014 NXP Semiconductors All rights reserved. + * + * Authors: Clément Perrochaud <clement.perrochaud@nxp.com> + * + * Derived from PN544 device driver: + * Copyright (C) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef __LOCAL_NXP_NCI_H_ +#define __LOCAL_NXP_NCI_H_ + +#include <linux/completion.h> +#include <linux/firmware.h> +#include <linux/nfc.h> +#include <linux/platform_data/nxp-nci.h> + +#include <net/nfc/nci_core.h> + +#define NXP_NCI_FW_HDR_LEN 2 +#define NXP_NCI_FW_CRC_LEN 2 + +#define NXP_NCI_FW_FRAME_LEN_MASK 0x03FF + +enum nxp_nci_mode { + NXP_NCI_MODE_COLD, + NXP_NCI_MODE_NCI, + NXP_NCI_MODE_FW +}; + +struct nxp_nci_phy_ops { + int (*set_mode)(void *id, enum nxp_nci_mode mode); + int (*write)(void *id, struct sk_buff *skb); +}; + +struct nxp_nci_fw_info { + char name[NFC_FIRMWARE_NAME_MAXSIZE + 1]; + const struct firmware *fw; + + size_t size; + size_t written; + + const u8 *data; + size_t frame_size; + + struct work_struct work; + struct completion cmd_completion; + + int cmd_result; +}; + +struct nxp_nci_info { + struct nci_dev *ndev; + void *phy_id; + struct device *pdev; + + enum nxp_nci_mode mode; + + const struct nxp_nci_phy_ops *phy_ops; + unsigned int max_payload; + + struct mutex info_lock; + + struct nxp_nci_fw_info fw_info; +}; + +int nxp_nci_fw_download(struct nci_dev *ndev, const char *firmware_name); +void nxp_nci_fw_work(struct work_struct *work); +void nxp_nci_fw_recv_frame(struct nci_dev *ndev, struct sk_buff *skb); +void nxp_nci_fw_work_complete(struct nxp_nci_info *info, int result); + +int nxp_nci_probe(void *phy_id, struct device *pdev, + const struct nxp_nci_phy_ops *phy_ops, + unsigned int max_payload, + struct nci_dev **ndev); +void nxp_nci_remove(struct nci_dev *ndev); + +#endif /* __LOCAL_NXP_NCI_H_ */ diff --git a/drivers/nfc/pn533/Kconfig b/drivers/nfc/pn533/Kconfig new file mode 100644 index 0000000..8516203 --- /dev/null +++ b/drivers/nfc/pn533/Kconfig @@ -0,0 +1,30 @@ +config NFC_PN533 + tristate + depends on m + help + NXP PN533 core driver. + This driver provides core functionality for NXP PN533 NFC devices. + +config NFC_PN533_USB + tristate "NFC PN533 device support (USB)" + depends on m + depends on USB + select NFC_PN533 + ---help--- + This module adds support for the NXP pn533 USB interface. + Select this if your platform is using the USB bus. + + If you choose to build a module, it'll be called pn533_usb. + Say N if unsure. + +config NFC_PN533_I2C + tristate "NFC PN533 device support (I2C)" + depends on m + depends on I2C + select NFC_PN533 + ---help--- + This module adds support for the NXP pn533 I2C interface. + Select this if your platform is using the I2C bus. + + If you choose to build a module, it'll be called pn533_i2c. + Say N if unsure. diff --git a/drivers/nfc/pn533/Makefile b/drivers/nfc/pn533/Makefile new file mode 100644 index 0000000..8460fb4 --- /dev/null +++ b/drivers/nfc/pn533/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for PN533 NFC driver +# +pn533_usb-objs = usb.o +pn533_i2c-objs = i2c.o + +obj-$(CPTCFG_NFC_PN533) += pn533.o +obj-$(CPTCFG_NFC_PN533_USB) += pn533_usb.o +obj-$(CPTCFG_NFC_PN533_I2C) += pn533_i2c.o diff --git a/drivers/nfc/pn533/i2c.c b/drivers/nfc/pn533/i2c.c new file mode 100644 index 0000000..1dc8924 --- /dev/null +++ b/drivers/nfc/pn533/i2c.c @@ -0,0 +1,281 @@ +/* + * Driver for NXP PN533 NFC Chip - I2C transport layer + * + * Copyright (C) 2011 Instituto Nokia de Tecnologia + * Copyright (C) 2012-2013 Tieto Poland + * Copyright (C) 2016 HALE electronic + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/nfc.h> +#include <linux/netdevice.h> +#include <linux/interrupt.h> +#include <net/nfc/nfc.h> +#include "pn533.h" + +#define VERSION "0.1" + +#define PN533_I2C_DRIVER_NAME "pn533_i2c" + +struct pn533_i2c_phy { + struct i2c_client *i2c_dev; + struct pn533 *priv; + + bool aborted; + + int hard_fault; /* + * < 0 if hardware error occurred (e.g. i2c err) + * and prevents normal operation. + */ +}; + +static int pn533_i2c_send_ack(struct pn533 *dev, gfp_t flags) +{ + struct pn533_i2c_phy *phy = dev->phy; + struct i2c_client *client = phy->i2c_dev; + u8 ack[6] = {0x00, 0x00, 0xff, 0x00, 0xff, 0x00}; + /* spec 6.2.1.3: Preamble, SoPC (2), ACK Code (2), Postamble */ + int rc; + + rc = i2c_master_send(client, ack, 6); + + return rc; +} + +static int pn533_i2c_send_frame(struct pn533 *dev, + struct sk_buff *out) +{ + struct pn533_i2c_phy *phy = dev->phy; + struct i2c_client *client = phy->i2c_dev; + int rc; + + if (phy->hard_fault != 0) + return phy->hard_fault; + + if (phy->priv == NULL) + phy->priv = dev; + + phy->aborted = false; + + print_hex_dump_debug("PN533_i2c TX: ", DUMP_PREFIX_NONE, 16, 1, + out->data, out->len, false); + + rc = i2c_master_send(client, out->data, out->len); + + if (rc == -EREMOTEIO) { /* Retry, chip was in power down */ + usleep_range(6000, 10000); + rc = i2c_master_send(client, out->data, out->len); + } + + if (rc >= 0) { + if (rc != out->len) + rc = -EREMOTEIO; + else + rc = 0; + } + + return rc; +} + +static void pn533_i2c_abort_cmd(struct pn533 *dev, gfp_t flags) +{ + struct pn533_i2c_phy *phy = dev->phy; + + phy->aborted = true; + + /* An ack will cancel the last issued command */ + pn533_i2c_send_ack(dev, flags); + + /* schedule cmd_complete_work to finish current command execution */ + pn533_recv_frame(phy->priv, NULL, -ENOENT); +} + +static int pn533_i2c_read(struct pn533_i2c_phy *phy, struct sk_buff **skb) +{ + struct i2c_client *client = phy->i2c_dev; + int len = PN533_EXT_FRAME_HEADER_LEN + + PN533_STD_FRAME_MAX_PAYLOAD_LEN + + PN533_STD_FRAME_TAIL_LEN + 1; + int r; + + *skb = alloc_skb(len, GFP_KERNEL); + if (*skb == NULL) + return -ENOMEM; + + r = i2c_master_recv(client, skb_put(*skb, len), len); + if (r != len) { + nfc_err(&client->dev, "cannot read. r=%d len=%d\n", r, len); + kfree_skb(*skb); + return -EREMOTEIO; + } + + if (!((*skb)->data[0] & 0x01)) { + nfc_err(&client->dev, "READY flag not set"); + kfree_skb(*skb); + return -EBUSY; + } + + /* remove READY byte */ + skb_pull(*skb, 1); + /* trim to frame size */ + skb_trim(*skb, phy->priv->ops->rx_frame_size((*skb)->data)); + + return 0; +} + +static irqreturn_t pn533_i2c_irq_thread_fn(int irq, void *data) +{ + struct pn533_i2c_phy *phy = data; + struct i2c_client *client; + struct sk_buff *skb = NULL; + int r; + + if (!phy || irq != phy->i2c_dev->irq) { + WARN_ON_ONCE(1); + return IRQ_NONE; + } + + client = phy->i2c_dev; + dev_dbg(&client->dev, "IRQ\n"); + + if (phy->hard_fault != 0) + return IRQ_HANDLED; + + r = pn533_i2c_read(phy, &skb); + if (r == -EREMOTEIO) { + phy->hard_fault = r; + + pn533_recv_frame(phy->priv, NULL, -EREMOTEIO); + + return IRQ_HANDLED; + } else if ((r == -ENOMEM) || (r == -EBADMSG) || (r == -EBUSY)) { + return IRQ_HANDLED; + } + + if (!phy->aborted) + pn533_recv_frame(phy->priv, skb, 0); + + return IRQ_HANDLED; +} + +static struct pn533_phy_ops i2c_phy_ops = { + .send_frame = pn533_i2c_send_frame, + .send_ack = pn533_i2c_send_ack, + .abort_cmd = pn533_i2c_abort_cmd, +}; + + +static int pn533_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pn533_i2c_phy *phy; + struct pn533 *priv; + int r = 0; + + dev_dbg(&client->dev, "%s\n", __func__); + dev_dbg(&client->dev, "IRQ: %d\n", client->irq); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + nfc_err(&client->dev, "Need I2C_FUNC_I2C\n"); + return -ENODEV; + } + + phy = devm_kzalloc(&client->dev, sizeof(struct pn533_i2c_phy), + GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->i2c_dev = client; + i2c_set_clientdata(client, phy); + + r = request_threaded_irq(client->irq, NULL, pn533_i2c_irq_thread_fn, + IRQF_TRIGGER_FALLING | + IRQF_SHARED | IRQF_ONESHOT, + PN533_I2C_DRIVER_NAME, phy); + + if (r < 0) + nfc_err(&client->dev, "Unable to register IRQ handler\n"); + + priv = pn533_register_device(PN533_DEVICE_PN532, + PN533_NO_TYPE_B_PROTOCOLS, + PN533_PROTO_REQ_ACK_RESP, + phy, &i2c_phy_ops, NULL, + &phy->i2c_dev->dev, + &client->dev); + + if (IS_ERR(priv)) { + r = PTR_ERR(priv); + goto err_register; + } + + phy->priv = priv; + + return 0; + +err_register: + free_irq(client->irq, phy); + + return r; +} + +static int pn533_i2c_remove(struct i2c_client *client) +{ + struct pn533_i2c_phy *phy = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "%s\n", __func__); + + pn533_unregister_device(phy->priv); + + free_irq(client->irq, phy); + + return 0; +} + +static const struct of_device_id of_pn533_i2c_match[] = { + { .compatible = "nxp,pn533-i2c", }, + { .compatible = "nxp,pn532-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_pn533_i2c_match); + +static struct i2c_device_id pn533_i2c_id_table[] = { + { PN533_I2C_DRIVER_NAME, 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, pn533_i2c_id_table); + +static struct i2c_driver pn533_i2c_driver = { + .driver = { + .name = PN533_I2C_DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(of_pn533_i2c_match), + }, + .probe = pn533_i2c_probe, + .id_table = pn533_i2c_id_table, + .remove = pn533_i2c_remove, +}; + +module_i2c_driver(pn533_i2c_driver); + +MODULE_AUTHOR("Michael Thalmeier <michael.thalmeier@hale.at>"); +MODULE_DESCRIPTION("PN533 I2C driver ver " VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/nfc/pn533/pn533.c b/drivers/nfc/pn533/pn533.c new file mode 100644 index 0000000..a966c6a --- /dev/null +++ b/drivers/nfc/pn533/pn533.c @@ -0,0 +1,2685 @@ +/* + * Driver for NXP PN533 NFC Chip - core functions + * + * Copyright (C) 2011 Instituto Nokia de Tecnologia + * Copyright (C) 2012-2013 Tieto Poland + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/nfc.h> +#include <linux/netdevice.h> +#include <net/nfc/nfc.h> +#include "pn533.h" + +#define VERSION "0.3" + +/* How much time we spend listening for initiators */ +#define PN533_LISTEN_TIME 2 +/* Delay between each poll frame (ms) */ +#define PN533_POLL_INTERVAL 10 + +/* structs for pn533 commands */ + +/* PN533_CMD_GET_FIRMWARE_VERSION */ +struct pn533_fw_version { + u8 ic; + u8 ver; + u8 rev; + u8 support; +}; + +/* PN533_CMD_RF_CONFIGURATION */ +#define PN533_CFGITEM_RF_FIELD 0x01 +#define PN533_CFGITEM_TIMING 0x02 +#define PN533_CFGITEM_MAX_RETRIES 0x05 +#define PN533_CFGITEM_PASORI 0x82 + +#define PN533_CFGITEM_RF_FIELD_AUTO_RFCA 0x2 +#define PN533_CFGITEM_RF_FIELD_ON 0x1 +#define PN533_CFGITEM_RF_FIELD_OFF 0x0 + +#define PN533_CONFIG_TIMING_102 0xb +#define PN533_CONFIG_TIMING_204 0xc +#define PN533_CONFIG_TIMING_409 0xd +#define PN533_CONFIG_TIMING_819 0xe + +#define PN533_CONFIG_MAX_RETRIES_NO_RETRY 0x00 +#define PN533_CONFIG_MAX_RETRIES_ENDLESS 0xFF + +struct pn533_config_max_retries { + u8 mx_rty_atr; + u8 mx_rty_psl; + u8 mx_rty_passive_act; +} __packed; + +struct pn533_config_timing { + u8 rfu; + u8 atr_res_timeout; + u8 dep_timeout; +} __packed; + +/* PN533_CMD_IN_LIST_PASSIVE_TARGET */ + +/* felica commands opcode */ +#define PN533_FELICA_OPC_SENSF_REQ 0 +#define PN533_FELICA_OPC_SENSF_RES 1 +/* felica SENSF_REQ parameters */ +#define PN533_FELICA_SENSF_SC_ALL 0xFFFF +#define PN533_FELICA_SENSF_RC_NO_SYSTEM_CODE 0 +#define PN533_FELICA_SENSF_RC_SYSTEM_CODE 1 +#define PN533_FELICA_SENSF_RC_ADVANCED_PROTOCOL 2 + +/* type B initiator_data values */ +#define PN533_TYPE_B_AFI_ALL_FAMILIES 0 +#define PN533_TYPE_B_POLL_METHOD_TIMESLOT 0 +#define PN533_TYPE_B_POLL_METHOD_PROBABILISTIC 1 + +union pn533_cmd_poll_initdata { + struct { + u8 afi; + u8 polling_method; + } __packed type_b; + struct { + u8 opcode; + __be16 sc; + u8 rc; + u8 tsn; + } __packed felica; +}; + +struct pn533_poll_modulations { + struct { + u8 maxtg; + u8 brty; + union pn533_cmd_poll_initdata initiator_data; + } __packed data; + u8 len; +}; + +static const struct pn533_poll_modulations poll_mod[] = { + [PN533_POLL_MOD_106KBPS_A] = { + .data = { + .maxtg = 1, + .brty = 0, + }, + .len = 2, + }, + [PN533_POLL_MOD_212KBPS_FELICA] = { + .data = { + .maxtg = 1, + .brty = 1, + .initiator_data.felica = { + .opcode = PN533_FELICA_OPC_SENSF_REQ, + .sc = PN533_FELICA_SENSF_SC_ALL, + .rc = PN533_FELICA_SENSF_RC_SYSTEM_CODE, + .tsn = 0x03, + }, + }, + .len = 7, + }, + [PN533_POLL_MOD_424KBPS_FELICA] = { + .data = { + .maxtg = 1, + .brty = 2, + .initiator_data.felica = { + .opcode = PN533_FELICA_OPC_SENSF_REQ, + .sc = PN533_FELICA_SENSF_SC_ALL, + .rc = PN533_FELICA_SENSF_RC_SYSTEM_CODE, + .tsn = 0x03, + }, + }, + .len = 7, + }, + [PN533_POLL_MOD_106KBPS_JEWEL] = { + .data = { + .maxtg = 1, + .brty = 4, + }, + .len = 2, + }, + [PN533_POLL_MOD_847KBPS_B] = { + .data = { + .maxtg = 1, + .brty = 8, + .initiator_data.type_b = { + .afi = PN533_TYPE_B_AFI_ALL_FAMILIES, + .polling_method = + PN533_TYPE_B_POLL_METHOD_TIMESLOT, + }, + }, + .len = 3, + }, + [PN533_LISTEN_MOD] = { + .len = 0, + }, +}; + +/* PN533_CMD_IN_ATR */ + +struct pn533_cmd_activate_response { + u8 status; + u8 nfcid3t[10]; + u8 didt; + u8 bst; + u8 brt; + u8 to; + u8 ppt; + /* optional */ + u8 gt[]; +} __packed; + +struct pn533_cmd_jump_dep_response { + u8 status; + u8 tg; + u8 nfcid3t[10]; + u8 didt; + u8 bst; + u8 brt; + u8 to; + u8 ppt; + /* optional */ + u8 gt[]; +} __packed; + + +/* PN533_TG_INIT_AS_TARGET */ +#define PN533_INIT_TARGET_PASSIVE 0x1 +#define PN533_INIT_TARGET_DEP 0x2 + +#define PN533_INIT_TARGET_RESP_FRAME_MASK 0x3 +#define PN533_INIT_TARGET_RESP_ACTIVE 0x1 +#define PN533_INIT_TARGET_RESP_DEP 0x4 + +/* The rule: value(high byte) + value(low byte) + checksum = 0 */ +static inline u8 pn533_ext_checksum(u16 value) +{ + return ~(u8)(((value & 0xFF00) >> 8) + (u8)(value & 0xFF)) + 1; +} + +/* The rule: value + checksum = 0 */ +static inline u8 pn533_std_checksum(u8 value) +{ + return ~value + 1; +} + +/* The rule: sum(data elements) + checksum = 0 */ +static u8 pn533_std_data_checksum(u8 *data, int datalen) +{ + u8 sum = 0; + int i; + + for (i = 0; i < datalen; i++) + sum += data[i]; + + return pn533_std_checksum(sum); +} + +static void pn533_std_tx_frame_init(void *_frame, u8 cmd_code) +{ + struct pn533_std_frame *frame = _frame; + + frame->preamble = 0; + frame->start_frame = cpu_to_be16(PN533_STD_FRAME_SOF); + PN533_STD_FRAME_IDENTIFIER(frame) = PN533_STD_FRAME_DIR_OUT; + PN533_FRAME_CMD(frame) = cmd_code; + frame->datalen = 2; +} + +static void pn533_std_tx_frame_finish(void *_frame) +{ + struct pn533_std_frame *frame = _frame; + + frame->datalen_checksum = pn533_std_checksum(frame->datalen); + + PN533_STD_FRAME_CHECKSUM(frame) = + pn533_std_data_checksum(frame->data, frame->datalen); + + PN533_STD_FRAME_POSTAMBLE(frame) = 0; +} + +static void pn533_std_tx_update_payload_len(void *_frame, int len) +{ + struct pn533_std_frame *frame = _frame; + + frame->datalen += len; +} + +static bool pn533_std_rx_frame_is_valid(void *_frame, struct pn533 *dev) +{ + u8 checksum; + struct pn533_std_frame *stdf = _frame; + + if (stdf->start_frame != cpu_to_be16(PN533_STD_FRAME_SOF)) + return false; + + if (likely(!PN533_STD_IS_EXTENDED(stdf))) { + /* Standard frame code */ + dev->ops->rx_header_len = PN533_STD_FRAME_HEADER_LEN; + + checksum = pn533_std_checksum(stdf->datalen); + if (checksum != stdf->datalen_checksum) + return false; + + checksum = pn533_std_data_checksum(stdf->data, stdf->datalen); + if (checksum != PN533_STD_FRAME_CHECKSUM(stdf)) + return false; + } else { + /* Extended */ + struct pn533_ext_frame *eif = _frame; + + dev->ops->rx_header_len = PN533_EXT_FRAME_HEADER_LEN; + + checksum = pn533_ext_checksum(be16_to_cpu(eif->datalen)); + if (checksum != eif->datalen_checksum) + return false; + + /* check data checksum */ + checksum = pn533_std_data_checksum(eif->data, + be16_to_cpu(eif->datalen)); + if (checksum != PN533_EXT_FRAME_CHECKSUM(eif)) + return false; + } + + return true; +} + +bool pn533_rx_frame_is_ack(void *_frame) +{ + struct pn533_std_frame *frame = _frame; + + if (frame->start_frame != cpu_to_be16(PN533_STD_FRAME_SOF)) + return false; + + if (frame->datalen != 0 || frame->datalen_checksum != 0xFF) + return false; + + return true; +} +EXPORT_SYMBOL_GPL(pn533_rx_frame_is_ack); + +static inline int pn533_std_rx_frame_size(void *frame) +{ + struct pn533_std_frame *f = frame; + + /* check for Extended Information frame */ + if (PN533_STD_IS_EXTENDED(f)) { + struct pn533_ext_frame *eif = frame; + + return sizeof(struct pn533_ext_frame) + + be16_to_cpu(eif->datalen) + PN533_STD_FRAME_TAIL_LEN; + } + + return sizeof(struct pn533_std_frame) + f->datalen + + PN533_STD_FRAME_TAIL_LEN; +} + +static u8 pn533_std_get_cmd_code(void *frame) +{ + struct pn533_std_frame *f = frame; + struct pn533_ext_frame *eif = frame; + + if (PN533_STD_IS_EXTENDED(f)) + return PN533_FRAME_CMD(eif); + else + return PN533_FRAME_CMD(f); +} + +bool pn533_rx_frame_is_cmd_response(struct pn533 *dev, void *frame) +{ + return (dev->ops->get_cmd_code(frame) == + PN533_CMD_RESPONSE(dev->cmd->code)); +} +EXPORT_SYMBOL_GPL(pn533_rx_frame_is_cmd_response); + + +static struct pn533_frame_ops pn533_std_frame_ops = { + .tx_frame_init = pn533_std_tx_frame_init, + .tx_frame_finish = pn533_std_tx_frame_finish, + .tx_update_payload_len = pn533_std_tx_update_payload_len, + .tx_header_len = PN533_STD_FRAME_HEADER_LEN, + .tx_tail_len = PN533_STD_FRAME_TAIL_LEN, + + .rx_is_frame_valid = pn533_std_rx_frame_is_valid, + .rx_frame_size = pn533_std_rx_frame_size, + .rx_header_len = PN533_STD_FRAME_HEADER_LEN, + .rx_tail_len = PN533_STD_FRAME_TAIL_LEN, + + .max_payload_len = PN533_STD_FRAME_MAX_PAYLOAD_LEN, + .get_cmd_code = pn533_std_get_cmd_code, +}; + +static void pn533_build_cmd_frame(struct pn533 *dev, u8 cmd_code, + struct sk_buff *skb) +{ + /* payload is already there, just update datalen */ + int payload_len = skb->len; + struct pn533_frame_ops *ops = dev->ops; + + + skb_push(skb, ops->tx_header_len); + skb_put(skb, ops->tx_tail_len); + + ops->tx_frame_init(skb->data, cmd_code); + ops->tx_update_payload_len(skb->data, payload_len); + ops->tx_frame_finish(skb->data); +} + +static int pn533_send_async_complete(struct pn533 *dev) +{ + struct pn533_cmd *cmd = dev->cmd; + int status = cmd->status; + + struct sk_buff *req = cmd->req; + struct sk_buff *resp = cmd->resp; + + int rc; + + dev_kfree_skb(req); + + if (status < 0) { + rc = cmd->complete_cb(dev, cmd->complete_cb_context, + ERR_PTR(status)); + dev_kfree_skb(resp); + goto done; + } + + skb_pull(resp, dev->ops->rx_header_len); + skb_trim(resp, resp->len - dev->ops->rx_tail_len); + + rc = cmd->complete_cb(dev, cmd->complete_cb_context, resp); + +done: + kfree(cmd); + dev->cmd = NULL; + return rc; +} + +static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req, + pn533_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + struct pn533_cmd *cmd; + int rc = 0; + + dev_dbg(dev->dev, "Sending command 0x%x\n", cmd_code); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->code = cmd_code; + cmd->req = req; + cmd->complete_cb = complete_cb; + cmd->complete_cb_context = complete_cb_context; + + pn533_build_cmd_frame(dev, cmd_code, req); + + mutex_lock(&dev->cmd_lock); + + if (!dev->cmd_pending) { + rc = dev->phy_ops->send_frame(dev, req); + if (rc) + goto error; + + dev->cmd_pending = 1; + dev->cmd = cmd; + goto unlock; + } + + dev_dbg(dev->dev, "%s Queueing command 0x%x\n", + __func__, cmd_code); + + INIT_LIST_HEAD(&cmd->queue); + list_add_tail(&cmd->queue, &dev->cmd_queue); + + goto unlock; + +error: + kfree(cmd); +unlock: + mutex_unlock(&dev->cmd_lock); + return rc; +} + +static int pn533_send_data_async(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req, + pn533_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + int rc; + + rc = __pn533_send_async(dev, cmd_code, req, complete_cb, + complete_cb_context); + + return rc; +} + +static int pn533_send_cmd_async(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req, + pn533_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + int rc; + + rc = __pn533_send_async(dev, cmd_code, req, complete_cb, + complete_cb_context); + + return rc; +} + +/* + * pn533_send_cmd_direct_async + * + * The function sends a piority cmd directly to the chip omitting the cmd + * queue. It's intended to be used by chaining mechanism of received responses + * where the host has to request every single chunk of data before scheduling + * next cmd from the queue. + */ +static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req, + pn533_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + struct pn533_cmd *cmd; + int rc; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->code = cmd_code; + cmd->req = req; + cmd->complete_cb = complete_cb; + cmd->complete_cb_context = complete_cb_context; + + pn533_build_cmd_frame(dev, cmd_code, req); + + rc = dev->phy_ops->send_frame(dev, req); + if (rc < 0) + kfree(cmd); + else + dev->cmd = cmd; + + return rc; +} + +static void pn533_wq_cmd_complete(struct work_struct *work) +{ + struct pn533 *dev = container_of(work, struct pn533, cmd_complete_work); + int rc; + + rc = pn533_send_async_complete(dev); + if (rc != -EINPROGRESS) + queue_work(dev->wq, &dev->cmd_work); +} + +static void pn533_wq_cmd(struct work_struct *work) +{ + struct pn533 *dev = container_of(work, struct pn533, cmd_work); + struct pn533_cmd *cmd; + int rc; + + mutex_lock(&dev->cmd_lock); + + if (list_empty(&dev->cmd_queue)) { + dev->cmd_pending = 0; + mutex_unlock(&dev->cmd_lock); + return; + } + + cmd = list_first_entry(&dev->cmd_queue, struct pn533_cmd, queue); + + list_del(&cmd->queue); + + mutex_unlock(&dev->cmd_lock); + + rc = dev->phy_ops->send_frame(dev, cmd->req); + if (rc < 0) { + dev_kfree_skb(cmd->req); + kfree(cmd); + return; + } + + dev->cmd = cmd; +} + +struct pn533_sync_cmd_response { + struct sk_buff *resp; + struct completion done; +}; + +static int pn533_send_sync_complete(struct pn533 *dev, void *_arg, + struct sk_buff *resp) +{ + struct pn533_sync_cmd_response *arg = _arg; + + arg->resp = resp; + complete(&arg->done); + + return 0; +} + +/* pn533_send_cmd_sync + * + * Please note the req parameter is freed inside the function to + * limit a number of return value interpretations by the caller. + * + * 1. negative in case of error during TX path -> req should be freed + * + * 2. negative in case of error during RX path -> req should not be freed + * as it's been already freed at the beginning of RX path by + * async_complete_cb. + * + * 3. valid pointer in case of succesfult RX path + * + * A caller has to check a return value with IS_ERR macro. If the test pass, + * the returned pointer is valid. + * + */ +static struct sk_buff *pn533_send_cmd_sync(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req) +{ + int rc; + struct pn533_sync_cmd_response arg; + + init_completion(&arg.done); + + rc = pn533_send_cmd_async(dev, cmd_code, req, + pn533_send_sync_complete, &arg); + if (rc) { + dev_kfree_skb(req); + return ERR_PTR(rc); + } + + wait_for_completion(&arg.done); + + return arg.resp; +} + +static struct sk_buff *pn533_alloc_skb(struct pn533 *dev, unsigned int size) +{ + struct sk_buff *skb; + + skb = alloc_skb(dev->ops->tx_header_len + + size + + dev->ops->tx_tail_len, GFP_KERNEL); + + if (skb) + skb_reserve(skb, dev->ops->tx_header_len); + + return skb; +} + +struct pn533_target_type_a { + __be16 sens_res; + u8 sel_res; + u8 nfcid_len; + u8 nfcid_data[]; +} __packed; + + +#define PN533_TYPE_A_SENS_RES_NFCID1(x) ((u8)((be16_to_cpu(x) & 0x00C0) >> 6)) +#define PN533_TYPE_A_SENS_RES_SSD(x) ((u8)((be16_to_cpu(x) & 0x001F) >> 0)) +#define PN533_TYPE_A_SENS_RES_PLATCONF(x) ((u8)((be16_to_cpu(x) & 0x0F00) >> 8)) + +#define PN533_TYPE_A_SENS_RES_SSD_JEWEL 0x00 +#define PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL 0x0C + +#define PN533_TYPE_A_SEL_PROT(x) (((x) & 0x60) >> 5) +#define PN533_TYPE_A_SEL_CASCADE(x) (((x) & 0x04) >> 2) + +#define PN533_TYPE_A_SEL_PROT_MIFARE 0 +#define PN533_TYPE_A_SEL_PROT_ISO14443 1 +#define PN533_TYPE_A_SEL_PROT_DEP 2 +#define PN533_TYPE_A_SEL_PROT_ISO14443_DEP 3 + +static bool pn533_target_type_a_is_valid(struct pn533_target_type_a *type_a, + int target_data_len) +{ + u8 ssd; + u8 platconf; + + if (target_data_len < sizeof(struct pn533_target_type_a)) + return false; + + /* + * The length check of nfcid[] and ats[] are not being performed because + * the values are not being used + */ + + /* Requirement 4.6.3.3 from NFC Forum Digital Spec */ + ssd = PN533_TYPE_A_SENS_RES_SSD(type_a->sens_res); + platconf = PN533_TYPE_A_SENS_RES_PLATCONF(type_a->sens_res); + + if ((ssd == PN533_TYPE_A_SENS_RES_SSD_JEWEL && + platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) || + (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL && + platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL)) + return false; + + /* Requirements 4.8.2.1, 4.8.2.3, 4.8.2.5 and 4.8.2.7 from NFC Forum */ + if (PN533_TYPE_A_SEL_CASCADE(type_a->sel_res) != 0) + return false; + + return true; +} + +static int pn533_target_found_type_a(struct nfc_target *nfc_tgt, u8 *tgt_data, + int tgt_data_len) +{ + struct pn533_target_type_a *tgt_type_a; + + tgt_type_a = (struct pn533_target_type_a *)tgt_data; + + if (!pn533_target_type_a_is_valid(tgt_type_a, tgt_data_len)) + return -EPROTO; + + switch (PN533_TYPE_A_SEL_PROT(tgt_type_a->sel_res)) { + case PN533_TYPE_A_SEL_PROT_MIFARE: + nfc_tgt->supported_protocols = NFC_PROTO_MIFARE_MASK; + break; + case PN533_TYPE_A_SEL_PROT_ISO14443: + nfc_tgt->supported_protocols = NFC_PROTO_ISO14443_MASK; + break; + case PN533_TYPE_A_SEL_PROT_DEP: + nfc_tgt->supported_protocols = NFC_PROTO_NFC_DEP_MASK; + break; + case PN533_TYPE_A_SEL_PROT_ISO14443_DEP: + nfc_tgt->supported_protocols = NFC_PROTO_ISO14443_MASK | + NFC_PROTO_NFC_DEP_MASK; + break; + } + + nfc_tgt->sens_res = be16_to_cpu(tgt_type_a->sens_res); + nfc_tgt->sel_res = tgt_type_a->sel_res; + nfc_tgt->nfcid1_len = tgt_type_a->nfcid_len; + memcpy(nfc_tgt->nfcid1, tgt_type_a->nfcid_data, nfc_tgt->nfcid1_len); + + return 0; +} + +struct pn533_target_felica { + u8 pol_res; + u8 opcode; + u8 nfcid2[NFC_NFCID2_MAXSIZE]; + u8 pad[8]; + /* optional */ + u8 syst_code[]; +} __packed; + +#define PN533_FELICA_SENSF_NFCID2_DEP_B1 0x01 +#define PN533_FELICA_SENSF_NFCID2_DEP_B2 0xFE + +static bool pn533_target_felica_is_valid(struct pn533_target_felica *felica, + int target_data_len) +{ + if (target_data_len < sizeof(struct pn533_target_felica)) + return false; + + if (felica->opcode != PN533_FELICA_OPC_SENSF_RES) + return false; + + return true; +} + +static int pn533_target_found_felica(struct nfc_target *nfc_tgt, u8 *tgt_data, + int tgt_data_len) +{ + struct pn533_target_felica *tgt_felica; + + tgt_felica = (struct pn533_target_felica *)tgt_data; + + if (!pn533_target_felica_is_valid(tgt_felica, tgt_data_len)) + return -EPROTO; + + if ((tgt_felica->nfcid2[0] == PN533_FELICA_SENSF_NFCID2_DEP_B1) && + (tgt_felica->nfcid2[1] == PN533_FELICA_SENSF_NFCID2_DEP_B2)) + nfc_tgt->supported_protocols = NFC_PROTO_NFC_DEP_MASK; + else + nfc_tgt->supported_protocols = NFC_PROTO_FELICA_MASK; + + memcpy(nfc_tgt->sensf_res, &tgt_felica->opcode, 9); + nfc_tgt->sensf_res_len = 9; + + memcpy(nfc_tgt->nfcid2, tgt_felica->nfcid2, NFC_NFCID2_MAXSIZE); + nfc_tgt->nfcid2_len = NFC_NFCID2_MAXSIZE; + + return 0; +} + +struct pn533_target_jewel { + __be16 sens_res; + u8 jewelid[4]; +} __packed; + +static bool pn533_target_jewel_is_valid(struct pn533_target_jewel *jewel, + int target_data_len) +{ + u8 ssd; + u8 platconf; + + if (target_data_len < sizeof(struct pn533_target_jewel)) + return false; + + /* Requirement 4.6.3.3 from NFC Forum Digital Spec */ + ssd = PN533_TYPE_A_SENS_RES_SSD(jewel->sens_res); + platconf = PN533_TYPE_A_SENS_RES_PLATCONF(jewel->sens_res); + + if ((ssd == PN533_TYPE_A_SENS_RES_SSD_JEWEL && + platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) || + (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL && + platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL)) + return false; + + return true; +} + +static int pn533_target_found_jewel(struct nfc_target *nfc_tgt, u8 *tgt_data, + int tgt_data_len) +{ + struct pn533_target_jewel *tgt_jewel; + + tgt_jewel = (struct pn533_target_jewel *)tgt_data; + + if (!pn533_target_jewel_is_valid(tgt_jewel, tgt_data_len)) + return -EPROTO; + + nfc_tgt->supported_protocols = NFC_PROTO_JEWEL_MASK; + nfc_tgt->sens_res = be16_to_cpu(tgt_jewel->sens_res); + nfc_tgt->nfcid1_len = 4; + memcpy(nfc_tgt->nfcid1, tgt_jewel->jewelid, nfc_tgt->nfcid1_len); + + return 0; +} + +struct pn533_type_b_prot_info { + u8 bitrate; + u8 fsci_type; + u8 fwi_adc_fo; +} __packed; + +#define PN533_TYPE_B_PROT_FCSI(x) (((x) & 0xF0) >> 4) +#define PN533_TYPE_B_PROT_TYPE(x) (((x) & 0x0F) >> 0) +#define PN533_TYPE_B_PROT_TYPE_RFU_MASK 0x8 + +struct pn533_type_b_sens_res { + u8 opcode; + u8 nfcid[4]; + u8 appdata[4]; + struct pn533_type_b_prot_info prot_info; +} __packed; + +#define PN533_TYPE_B_OPC_SENSB_RES 0x50 + +struct pn533_target_type_b { + struct pn533_type_b_sens_res sensb_res; + u8 attrib_res_len; + u8 attrib_res[]; +} __packed; + +static bool pn533_target_type_b_is_valid(struct pn533_target_type_b *type_b, + int target_data_len) +{ + if (target_data_len < sizeof(struct pn533_target_type_b)) + return false; + + if (type_b->sensb_res.opcode != PN533_TYPE_B_OPC_SENSB_RES) + return false; + + if (PN533_TYPE_B_PROT_TYPE(type_b->sensb_res.prot_info.fsci_type) & + PN533_TYPE_B_PROT_TYPE_RFU_MASK) + return false; + + return true; +} + +static int pn533_target_found_type_b(struct nfc_target *nfc_tgt, u8 *tgt_data, + int tgt_data_len) +{ + struct pn533_target_type_b *tgt_type_b; + + tgt_type_b = (struct pn533_target_type_b *)tgt_data; + + if (!pn533_target_type_b_is_valid(tgt_type_b, tgt_data_len)) + return -EPROTO; + + nfc_tgt->supported_protocols = NFC_PROTO_ISO14443_B_MASK; + + return 0; +} + +static void pn533_poll_reset_mod_list(struct pn533 *dev); +static int pn533_target_found(struct pn533 *dev, u8 tg, u8 *tgdata, + int tgdata_len) +{ + struct nfc_target nfc_tgt; + int rc; + + dev_dbg(dev->dev, "%s: modulation=%d\n", + __func__, dev->poll_mod_curr); + + if (tg != 1) + return -EPROTO; + + memset(&nfc_tgt, 0, sizeof(struct nfc_target)); + + switch (dev->poll_mod_curr) { + case PN533_POLL_MOD_106KBPS_A: + rc = pn533_target_found_type_a(&nfc_tgt, tgdata, tgdata_len); + break; + case PN533_POLL_MOD_212KBPS_FELICA: + case PN533_POLL_MOD_424KBPS_FELICA: + rc = pn533_target_found_felica(&nfc_tgt, tgdata, tgdata_len); + break; + case PN533_POLL_MOD_106KBPS_JEWEL: + rc = pn533_target_found_jewel(&nfc_tgt, tgdata, tgdata_len); + break; + case PN533_POLL_MOD_847KBPS_B: + rc = pn533_target_found_type_b(&nfc_tgt, tgdata, tgdata_len); + break; + default: + nfc_err(dev->dev, + "Unknown current poll modulation\n"); + return -EPROTO; + } + + if (rc) + return rc; + + if (!(nfc_tgt.supported_protocols & dev->poll_protocols)) { + dev_dbg(dev->dev, + "The Tg found doesn't have the desired protocol\n"); + return -EAGAIN; + } + + dev_dbg(dev->dev, + "Target found - supported protocols: 0x%x\n", + nfc_tgt.supported_protocols); + + dev->tgt_available_prots = nfc_tgt.supported_protocols; + + pn533_poll_reset_mod_list(dev); + nfc_targets_found(dev->nfc_dev, &nfc_tgt, 1); + + return 0; +} + +static inline void pn533_poll_next_mod(struct pn533 *dev) +{ + dev->poll_mod_curr = (dev->poll_mod_curr + 1) % dev->poll_mod_count; +} + +static void pn533_poll_reset_mod_list(struct pn533 *dev) +{ + dev->poll_mod_count = 0; +} + +static void pn533_poll_add_mod(struct pn533 *dev, u8 mod_index) +{ + dev->poll_mod_active[dev->poll_mod_count] = + (struct pn533_poll_modulations *)&poll_mod[mod_index]; + dev->poll_mod_count++; +} + +static void pn533_poll_create_mod_list(struct pn533 *dev, + u32 im_protocols, u32 tm_protocols) +{ + pn533_poll_reset_mod_list(dev); + + if ((im_protocols & NFC_PROTO_MIFARE_MASK) || + (im_protocols & NFC_PROTO_ISO14443_MASK) || + (im_protocols & NFC_PROTO_NFC_DEP_MASK)) + pn533_poll_add_mod(dev, PN533_POLL_MOD_106KBPS_A); + + if (im_protocols & NFC_PROTO_FELICA_MASK || + im_protocols & NFC_PROTO_NFC_DEP_MASK) { + pn533_poll_add_mod(dev, PN533_POLL_MOD_212KBPS_FELICA); + pn533_poll_add_mod(dev, PN533_POLL_MOD_424KBPS_FELICA); + } + + if (im_protocols & NFC_PROTO_JEWEL_MASK) + pn533_poll_add_mod(dev, PN533_POLL_MOD_106KBPS_JEWEL); + + if (im_protocols & NFC_PROTO_ISO14443_B_MASK) + pn533_poll_add_mod(dev, PN533_POLL_MOD_847KBPS_B); + + if (tm_protocols) + pn533_poll_add_mod(dev, PN533_LISTEN_MOD); +} + +static int pn533_start_poll_complete(struct pn533 *dev, struct sk_buff *resp) +{ + u8 nbtg, tg, *tgdata; + int rc, tgdata_len; + + /* Toggle the DEP polling */ + if (dev->poll_protocols & NFC_PROTO_NFC_DEP_MASK) + dev->poll_dep = 1; + + nbtg = resp->data[0]; + tg = resp->data[1]; + tgdata = &resp->data[2]; + tgdata_len = resp->len - 2; /* nbtg + tg */ + + if (nbtg) { + rc = pn533_target_found(dev, tg, tgdata, tgdata_len); + + /* We must stop the poll after a valid target found */ + if (rc == 0) + return 0; + } + + return -EAGAIN; +} + +static struct sk_buff *pn533_alloc_poll_tg_frame(struct pn533 *dev) +{ + struct sk_buff *skb; + u8 *felica, *nfcid3, *gb; + + u8 *gbytes = dev->gb; + size_t gbytes_len = dev->gb_len; + + u8 felica_params[18] = {0x1, 0xfe, /* DEP */ + 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, /* random */ + 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, + 0xff, 0xff}; /* System code */ + + u8 mifare_params[6] = {0x1, 0x1, /* SENS_RES */ + 0x0, 0x0, 0x0, + 0x40}; /* SEL_RES for DEP */ + + unsigned int skb_len = 36 + /* + * mode (1), mifare (6), + * felica (18), nfcid3 (10), gb_len (1) + */ + gbytes_len + + 1; /* len Tk*/ + + skb = pn533_alloc_skb(dev, skb_len); + if (!skb) + return NULL; + + /* DEP support only */ + *skb_put(skb, 1) = PN533_INIT_TARGET_DEP; + + /* MIFARE params */ + memcpy(skb_put(skb, 6), mifare_params, 6); + + /* Felica params */ + felica = skb_put(skb, 18); + memcpy(felica, felica_params, 18); + get_random_bytes(felica + 2, 6); + + /* NFCID3 */ + nfcid3 = skb_put(skb, 10); + memset(nfcid3, 0, 10); + memcpy(nfcid3, felica, 8); + + /* General bytes */ + *skb_put(skb, 1) = gbytes_len; + + gb = skb_put(skb, gbytes_len); + memcpy(gb, gbytes, gbytes_len); + + /* Len Tk */ + *skb_put(skb, 1) = 0; + + return skb; +} + +static void pn533_wq_tm_mi_recv(struct work_struct *work); +static struct sk_buff *pn533_build_response(struct pn533 *dev); + +static int pn533_tm_get_data_complete(struct pn533 *dev, void *arg, + struct sk_buff *resp) +{ + struct sk_buff *skb; + u8 status, ret, mi; + int rc; + + dev_dbg(dev->dev, "%s\n", __func__); + + if (IS_ERR(resp)) { + skb_queue_purge(&dev->resp_q); + return PTR_ERR(resp); + } + + status = resp->data[0]; + + ret = status & PN533_CMD_RET_MASK; + mi = status & PN533_CMD_MI_MASK; + + skb_pull(resp, sizeof(status)); + + if (ret != PN533_CMD_RET_SUCCESS) { + rc = -EIO; + goto error; + } + + skb_queue_tail(&dev->resp_q, resp); + + if (mi) { + queue_work(dev->wq, &dev->mi_tm_rx_work); + return -EINPROGRESS; + } + + skb = pn533_build_response(dev); + if (!skb) { + rc = -EIO; + goto error; + } + + return nfc_tm_data_received(dev->nfc_dev, skb); + +error: + nfc_tm_deactivated(dev->nfc_dev); + dev->tgt_mode = 0; + skb_queue_purge(&dev->resp_q); + dev_kfree_skb(resp); + + return rc; +} + +static void pn533_wq_tm_mi_recv(struct work_struct *work) +{ + struct pn533 *dev = container_of(work, struct pn533, mi_tm_rx_work); + struct sk_buff *skb; + int rc; + + dev_dbg(dev->dev, "%s\n", __func__); + + skb = pn533_alloc_skb(dev, 0); + if (!skb) + return; + + rc = pn533_send_cmd_direct_async(dev, + PN533_CMD_TG_GET_DATA, + skb, + pn533_tm_get_data_complete, + NULL); + + if (rc < 0) + dev_kfree_skb(skb); +} + +static int pn533_tm_send_complete(struct pn533 *dev, void *arg, + struct sk_buff *resp); +static void pn533_wq_tm_mi_send(struct work_struct *work) +{ + struct pn533 *dev = container_of(work, struct pn533, mi_tm_tx_work); + struct sk_buff *skb; + int rc; + + dev_dbg(dev->dev, "%s\n", __func__); + + /* Grab the first skb in the queue */ + skb = skb_dequeue(&dev->fragment_skb); + if (skb == NULL) { /* No more data */ + /* Reset the queue for future use */ + skb_queue_head_init(&dev->fragment_skb); + goto error; + } + + /* last entry - remove MI bit */ + if (skb_queue_len(&dev->fragment_skb) == 0) { + rc = pn533_send_cmd_direct_async(dev, PN533_CMD_TG_SET_DATA, + skb, pn533_tm_send_complete, NULL); + } else + rc = pn533_send_cmd_direct_async(dev, + PN533_CMD_TG_SET_META_DATA, + skb, pn533_tm_send_complete, NULL); + + if (rc == 0) /* success */ + return; + + dev_err(dev->dev, + "Error %d when trying to perform set meta data_exchange", rc); + + dev_kfree_skb(skb); + +error: + dev->phy_ops->send_ack(dev, GFP_KERNEL); + queue_work(dev->wq, &dev->cmd_work); +} + +static void pn533_wq_tg_get_data(struct work_struct *work) +{ + struct pn533 *dev = container_of(work, struct pn533, tg_work); + struct sk_buff *skb; + int rc; + + dev_dbg(dev->dev, "%s\n", __func__); + + skb = pn533_alloc_skb(dev, 0); + if (!skb) + return; + + rc = pn533_send_data_async(dev, PN533_CMD_TG_GET_DATA, skb, + pn533_tm_get_data_complete, NULL); + + if (rc < 0) + dev_kfree_skb(skb); +} + +#define ATR_REQ_GB_OFFSET 17 +static int pn533_init_target_complete(struct pn533 *dev, struct sk_buff *resp) +{ + u8 mode, *cmd, comm_mode = NFC_COMM_PASSIVE, *gb; + size_t gb_len; + int rc; + + dev_dbg(dev->dev, "%s\n", __func__); + + if (resp->len < ATR_REQ_GB_OFFSET + 1) + return -EINVAL; + + mode = resp->data[0]; + cmd = &resp->data[1]; + + dev_dbg(dev->dev, "Target mode 0x%x len %d\n", + mode, resp->len); + + if ((mode & PN533_INIT_TARGET_RESP_FRAME_MASK) == + PN533_INIT_TARGET_RESP_ACTIVE) + comm_mode = NFC_COMM_ACTIVE; + + if ((mode & PN533_INIT_TARGET_RESP_DEP) == 0) /* Only DEP supported */ + return -EOPNOTSUPP; + + gb = cmd + ATR_REQ_GB_OFFSET; + gb_len = resp->len - (ATR_REQ_GB_OFFSET + 1); + + rc = nfc_tm_activated(dev->nfc_dev, NFC_PROTO_NFC_DEP_MASK, + comm_mode, gb, gb_len); + if (rc < 0) { + nfc_err(dev->dev, + "Error when signaling target activation\n"); + return rc; + } + + dev->tgt_mode = 1; + queue_work(dev->wq, &dev->tg_work); + + return 0; +} + +static void pn533_listen_mode_timer(unsigned long data) +{ + struct pn533 *dev = (struct pn533 *)data; + + dev_dbg(dev->dev, "Listen mode timeout\n"); + + dev->cancel_listen = 1; + + pn533_poll_next_mod(dev); + + queue_delayed_work(dev->wq, &dev->poll_work, + msecs_to_jiffies(PN533_POLL_INTERVAL)); +} + +static int pn533_rf_complete(struct pn533 *dev, void *arg, + struct sk_buff *resp) +{ + int rc = 0; + + dev_dbg(dev->dev, "%s\n", __func__); + + if (IS_ERR(resp)) { + rc = PTR_ERR(resp); + + nfc_err(dev->dev, "RF setting error %d\n", rc); + + return rc; + } + + queue_delayed_work(dev->wq, &dev->poll_work, + msecs_to_jiffies(PN533_POLL_INTERVAL)); + + dev_kfree_skb(resp); + return rc; +} + +static void pn533_wq_rf(struct work_struct *work) +{ + struct pn533 *dev = container_of(work, struct pn533, rf_work); + struct sk_buff *skb; + int rc; + + dev_dbg(dev->dev, "%s\n", __func__); + + skb = pn533_alloc_skb(dev, 2); + if (!skb) + return; + + *skb_put(skb, 1) = PN533_CFGITEM_RF_FIELD; + *skb_put(skb, 1) = PN533_CFGITEM_RF_FIELD_AUTO_RFCA; + + rc = pn533_send_cmd_async(dev, PN533_CMD_RF_CONFIGURATION, skb, + pn533_rf_complete, NULL); + if (rc < 0) { + dev_kfree_skb(skb); + nfc_err(dev->dev, "RF setting error %d\n", rc); + } +} + +static int pn533_poll_dep_complete(struct pn533 *dev, void *arg, + struct sk_buff *resp) +{ + struct pn533_cmd_jump_dep_response *rsp; + struct nfc_target nfc_target; + u8 target_gt_len; + int rc; + + if (IS_ERR(resp)) + return PTR_ERR(resp); + + rsp = (struct pn533_cmd_jump_dep_response *)resp->data; + + rc = rsp->status & PN533_CMD_RET_MASK; + if (rc != PN533_CMD_RET_SUCCESS) { + /* Not target found, turn radio off */ + queue_work(dev->wq, &dev->rf_work); + + dev_kfree_skb(resp); + return 0; + } + + dev_dbg(dev->dev, "Creating new target"); + + nfc_target.supported_protocols = NFC_PROTO_NFC_DEP_MASK; + nfc_target.nfcid1_len = 10; + memcpy(nfc_target.nfcid1, rsp->nfcid3t, nfc_target.nfcid1_len); + rc = nfc_targets_found(dev->nfc_dev, &nfc_target, 1); + if (rc) + goto error; + + dev->tgt_available_prots = 0; + dev->tgt_active_prot = NFC_PROTO_NFC_DEP; + + /* ATR_RES general bytes are located at offset 17 */ + target_gt_len = resp->len - 17; + rc = nfc_set_remote_general_bytes(dev->nfc_dev, + rsp->gt, target_gt_len); + if (!rc) { + rc = nfc_dep_link_is_up(dev->nfc_dev, + dev->nfc_dev->targets[0].idx, + 0, NFC_RF_INITIATOR); + + if (!rc) + pn533_poll_reset_mod_list(dev); + } +error: + dev_kfree_skb(resp); + return rc; +} + +#define PASSIVE_DATA_LEN 5 +static int pn533_poll_dep(struct nfc_dev *nfc_dev) +{ + struct pn533 *dev = nfc_get_drvdata(nfc_dev); + struct sk_buff *skb; + int rc, skb_len; + u8 *next, nfcid3[NFC_NFCID3_MAXSIZE]; + u8 passive_data[PASSIVE_DATA_LEN] = {0x00, 0xff, 0xff, 0x00, 0x3}; + + dev_dbg(dev->dev, "%s", __func__); + + if (!dev->gb) { + dev->gb = nfc_get_local_general_bytes(nfc_dev, &dev->gb_len); + + if (!dev->gb || !dev->gb_len) { + dev->poll_dep = 0; + queue_work(dev->wq, &dev->rf_work); + } + } + + skb_len = 3 + dev->gb_len; /* ActPass + BR + Next */ + skb_len += PASSIVE_DATA_LEN; + + /* NFCID3 */ + skb_len += NFC_NFCID3_MAXSIZE; + nfcid3[0] = 0x1; + nfcid3[1] = 0xfe; + get_random_bytes(nfcid3 + 2, 6); + + skb = pn533_alloc_skb(dev, skb_len); + if (!skb) + return -ENOMEM; + + *skb_put(skb, 1) = 0x01; /* Active */ + *skb_put(skb, 1) = 0x02; /* 424 kbps */ + + next = skb_put(skb, 1); /* Next */ + *next = 0; + + /* Copy passive data */ + memcpy(skb_put(skb, PASSIVE_DATA_LEN), passive_data, PASSIVE_DATA_LEN); + *next |= 1; + + /* Copy NFCID3 (which is NFCID2 from SENSF_RES) */ + memcpy(skb_put(skb, NFC_NFCID3_MAXSIZE), nfcid3, + NFC_NFCID3_MAXSIZE); + *next |= 2; + + memcpy(skb_put(skb, dev->gb_len), dev->gb, dev->gb_len); + *next |= 4; /* We have some Gi */ + + rc = pn533_send_cmd_async(dev, PN533_CMD_IN_JUMP_FOR_DEP, skb, + pn533_poll_dep_complete, NULL); + + if (rc < 0) + dev_kfree_skb(skb); + + return rc; +} + +static int pn533_poll_complete(struct pn533 *dev, void *arg, + struct sk_buff *resp) +{ + struct pn533_poll_modulations *cur_mod; + int rc; + + dev_dbg(dev->dev, "%s\n", __func__); + + if (IS_ERR(resp)) { + rc = PTR_ERR(resp); + + nfc_err(dev->dev, "%s Poll complete error %d\n", + __func__, rc); + + if (rc == -ENOENT) { + if (dev->poll_mod_count != 0) + return rc; + goto stop_poll; + } else if (rc < 0) { + nfc_err(dev->dev, + "Error %d when running poll\n", rc); + goto stop_poll; + } + } + + cur_mod = dev->poll_mod_active[dev->poll_mod_curr]; + + if (cur_mod->len == 0) { /* Target mode */ + del_timer(&dev->listen_timer); + rc = pn533_init_target_complete(dev, resp); + goto done; + } + + /* Initiator mode */ + rc = pn533_start_poll_complete(dev, resp); + if (!rc) + goto done; + + if (!dev->poll_mod_count) { + dev_dbg(dev->dev, "Polling has been stopped\n"); + goto done; + } + + pn533_poll_next_mod(dev); + /* Not target found, turn radio off */ + queue_work(dev->wq, &dev->rf_work); + +done: + dev_kfree_skb(resp); + return rc; + +stop_poll: + nfc_err(dev->dev, "Polling operation has been stopped\n"); + + pn533_poll_reset_mod_list(dev); + dev->poll_protocols = 0; + return rc; +} + +static struct sk_buff *pn533_alloc_poll_in_frame(struct pn533 *dev, + struct pn533_poll_modulations *mod) +{ + struct sk_buff *skb; + + skb = pn533_alloc_skb(dev, mod->len); + if (!skb) + return NULL; + + memcpy(skb_put(skb, mod->len), &mod->data, mod->len); + + return skb; +} + +static int pn533_send_poll_frame(struct pn533 *dev) +{ + struct pn533_poll_modulations *mod; + struct sk_buff *skb; + int rc; + u8 cmd_code; + + mod = dev->poll_mod_active[dev->poll_mod_curr]; + + dev_dbg(dev->dev, "%s mod len %d\n", + __func__, mod->len); + + if ((dev->poll_protocols & NFC_PROTO_NFC_DEP_MASK) && dev->poll_dep) { + dev->poll_dep = 0; + return pn533_poll_dep(dev->nfc_dev); + } + + if (mod->len == 0) { /* Listen mode */ + cmd_code = PN533_CMD_TG_INIT_AS_TARGET; + skb = pn533_alloc_poll_tg_frame(dev); + } else { /* Polling mode */ + cmd_code = PN533_CMD_IN_LIST_PASSIVE_TARGET; + skb = pn533_alloc_poll_in_frame(dev, mod); + } + + if (!skb) { + nfc_err(dev->dev, "Failed to allocate skb\n"); + return -ENOMEM; + } + + rc = pn533_send_cmd_async(dev, cmd_code, skb, pn533_poll_complete, + NULL); + if (rc < 0) { + dev_kfree_skb(skb); + nfc_err(dev->dev, "Polling loop error %d\n", rc); + } + + return rc; +} + +static void pn533_wq_poll(struct work_struct *work) +{ + struct pn533 *dev = container_of(work, struct pn533, poll_work.work); + struct pn533_poll_modulations *cur_mod; + int rc; + + cur_mod = dev->poll_mod_active[dev->poll_mod_curr]; + + dev_dbg(dev->dev, + "%s cancel_listen %d modulation len %d\n", + __func__, dev->cancel_listen, cur_mod->len); + + if (dev->cancel_listen == 1) { + dev->cancel_listen = 0; + dev->phy_ops->abort_cmd(dev, GFP_ATOMIC); + } + + rc = pn533_send_poll_frame(dev); + if (rc) + return; + + if (cur_mod->len == 0 && dev->poll_mod_count > 1) + mod_timer(&dev->listen_timer, jiffies + PN533_LISTEN_TIME * HZ); +} + +static int pn533_start_poll(struct nfc_dev *nfc_dev, + u32 im_protocols, u32 tm_protocols) +{ + struct pn533 *dev = nfc_get_drvdata(nfc_dev); + struct pn533_poll_modulations *cur_mod; + u8 rand_mod; + int rc; + + dev_dbg(dev->dev, + "%s: im protocols 0x%x tm protocols 0x%x\n", + __func__, im_protocols, tm_protocols); + + if (dev->tgt_active_prot) { + nfc_err(dev->dev, + "Cannot poll with a target already activated\n"); + return -EBUSY; + } + + if (dev->tgt_mode) { + nfc_err(dev->dev, + "Cannot poll while already being activated\n"); + return -EBUSY; + } + + if (tm_protocols) { + dev->gb = nfc_get_local_general_bytes(nfc_dev, &dev->gb_len); + if (dev->gb == NULL) + tm_protocols = 0; + } + + pn533_poll_create_mod_list(dev, im_protocols, tm_protocols); + dev->poll_protocols = im_protocols; + dev->listen_protocols = tm_protocols; + + /* Do not always start polling from the same modulation */ + get_random_bytes(&rand_mod, sizeof(rand_mod)); + rand_mod %= dev->poll_mod_count; + dev->poll_mod_curr = rand_mod; + + cur_mod = dev->poll_mod_active[dev->poll_mod_curr]; + + rc = pn533_send_poll_frame(dev); + + /* Start listen timer */ + if (!rc && cur_mod->len == 0 && dev->poll_mod_count > 1) + mod_timer(&dev->listen_timer, jiffies + PN533_LISTEN_TIME * HZ); + + return rc; +} + +static void pn533_stop_poll(struct nfc_dev *nfc_dev) +{ + struct pn533 *dev = nfc_get_drvdata(nfc_dev); + + del_timer(&dev->listen_timer); + + if (!dev->poll_mod_count) { + dev_dbg(dev->dev, + "Polling operation was not running\n"); + return; + } + + dev->phy_ops->abort_cmd(dev, GFP_KERNEL); + flush_delayed_work(&dev->poll_work); + pn533_poll_reset_mod_list(dev); +} + +static int pn533_activate_target_nfcdep(struct pn533 *dev) +{ + struct pn533_cmd_activate_response *rsp; + u16 gt_len; + int rc; + struct sk_buff *skb; + struct sk_buff *resp; + + dev_dbg(dev->dev, "%s\n", __func__); + + skb = pn533_alloc_skb(dev, sizeof(u8) * 2); /*TG + Next*/ + if (!skb) + return -ENOMEM; + + *skb_put(skb, sizeof(u8)) = 1; /* TG */ + *skb_put(skb, sizeof(u8)) = 0; /* Next */ + + resp = pn533_send_cmd_sync(dev, PN533_CMD_IN_ATR, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); + + rsp = (struct pn533_cmd_activate_response *)resp->data; + rc = rsp->status & PN533_CMD_RET_MASK; + if (rc != PN533_CMD_RET_SUCCESS) { + nfc_err(dev->dev, + "Target activation failed (error 0x%x)\n", rc); + dev_kfree_skb(resp); + return -EIO; + } + + /* ATR_RES general bytes are located at offset 16 */ + gt_len = resp->len - 16; + rc = nfc_set_remote_general_bytes(dev->nfc_dev, rsp->gt, gt_len); + + dev_kfree_skb(resp); + return rc; +} + +static int pn533_activate_target(struct nfc_dev *nfc_dev, + struct nfc_target *target, u32 protocol) +{ + struct pn533 *dev = nfc_get_drvdata(nfc_dev); + int rc; + + dev_dbg(dev->dev, "%s: protocol=%u\n", __func__, protocol); + + if (dev->poll_mod_count) { + nfc_err(dev->dev, + "Cannot activate while polling\n"); + return -EBUSY; + } + + if (dev->tgt_active_prot) { + nfc_err(dev->dev, + "There is already an active target\n"); + return -EBUSY; + } + + if (!dev->tgt_available_prots) { + nfc_err(dev->dev, + "There is no available target to activate\n"); + return -EINVAL; + } + + if (!(dev->tgt_available_prots & (1 << protocol))) { + nfc_err(dev->dev, + "Target doesn't support requested proto %u\n", + protocol); + return -EINVAL; + } + + if (protocol == NFC_PROTO_NFC_DEP) { + rc = pn533_activate_target_nfcdep(dev); + if (rc) { + nfc_err(dev->dev, + "Activating target with DEP failed %d\n", rc); + return rc; + } + } + + dev->tgt_active_prot = protocol; + dev->tgt_available_prots = 0; + + return 0; +} + +static int pn533_deactivate_target_complete(struct pn533 *dev, void *arg, + struct sk_buff *resp) +{ + int rc = 0; + + dev_dbg(dev->dev, "%s\n", __func__); + + if (IS_ERR(resp)) { + rc = PTR_ERR(resp); + + nfc_err(dev->dev, "Target release error %d\n", rc); + + return rc; + } + + rc = resp->data[0] & PN533_CMD_RET_MASK; + if (rc != PN533_CMD_RET_SUCCESS) + nfc_err(dev->dev, + "Error 0x%x when releasing the target\n", rc); + + dev_kfree_skb(resp); + return rc; +} + +static void pn533_deactivate_target(struct nfc_dev *nfc_dev, + struct nfc_target *target, u8 mode) +{ + struct pn533 *dev = nfc_get_drvdata(nfc_dev); + struct sk_buff *skb; + int rc; + + dev_dbg(dev->dev, "%s\n", __func__); + + if (!dev->tgt_active_prot) { + nfc_err(dev->dev, "There is no active target\n"); + return; + } + + dev->tgt_active_prot = 0; + skb_queue_purge(&dev->resp_q); + + skb = pn533_alloc_skb(dev, sizeof(u8)); + if (!skb) + return; + + *skb_put(skb, 1) = 1; /* TG*/ + + rc = pn533_send_cmd_async(dev, PN533_CMD_IN_RELEASE, skb, + pn533_deactivate_target_complete, NULL); + if (rc < 0) { + dev_kfree_skb(skb); + nfc_err(dev->dev, "Target release error %d\n", rc); + } +} + + +static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, + struct sk_buff *resp) +{ + struct pn533_cmd_jump_dep_response *rsp; + u8 target_gt_len; + int rc; + u8 active = *(u8 *)arg; + + kfree(arg); + + if (IS_ERR(resp)) + return PTR_ERR(resp); + + if (dev->tgt_available_prots && + !(dev->tgt_available_prots & (1 << NFC_PROTO_NFC_DEP))) { + nfc_err(dev->dev, + "The target does not support DEP\n"); + rc = -EINVAL; + goto error; + } + + rsp = (struct pn533_cmd_jump_dep_response *)resp->data; + + rc = rsp->status & PN533_CMD_RET_MASK; + if (rc != PN533_CMD_RET_SUCCESS) { + nfc_err(dev->dev, + "Bringing DEP link up failed (error 0x%x)\n", rc); + goto error; + } + + if (!dev->tgt_available_prots) { + struct nfc_target nfc_target; + + dev_dbg(dev->dev, "Creating new target\n"); + + nfc_target.supported_protocols = NFC_PROTO_NFC_DEP_MASK; + nfc_target.nfcid1_len = 10; + memcpy(nfc_target.nfcid1, rsp->nfcid3t, nfc_target.nfcid1_len); + rc = nfc_targets_found(dev->nfc_dev, &nfc_target, 1); + if (rc) + goto error; + + dev->tgt_available_prots = 0; + } + + dev->tgt_active_prot = NFC_PROTO_NFC_DEP; + + /* ATR_RES general bytes are located at offset 17 */ + target_gt_len = resp->len - 17; + rc = nfc_set_remote_general_bytes(dev->nfc_dev, + rsp->gt, target_gt_len); + if (rc == 0) + rc = nfc_dep_link_is_up(dev->nfc_dev, + dev->nfc_dev->targets[0].idx, + !active, NFC_RF_INITIATOR); + +error: + dev_kfree_skb(resp); + return rc; +} + +static int pn533_rf_field(struct nfc_dev *nfc_dev, u8 rf); +static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, + u8 comm_mode, u8 *gb, size_t gb_len) +{ + struct pn533 *dev = nfc_get_drvdata(nfc_dev); + struct sk_buff *skb; + int rc, skb_len; + u8 *next, *arg, nfcid3[NFC_NFCID3_MAXSIZE]; + u8 passive_data[PASSIVE_DATA_LEN] = {0x00, 0xff, 0xff, 0x00, 0x3}; + + dev_dbg(dev->dev, "%s\n", __func__); + + if (dev->poll_mod_count) { + nfc_err(dev->dev, + "Cannot bring the DEP link up while polling\n"); + return -EBUSY; + } + + if (dev->tgt_active_prot) { + nfc_err(dev->dev, + "There is already an active target\n"); + return -EBUSY; + } + + skb_len = 3 + gb_len; /* ActPass + BR + Next */ + skb_len += PASSIVE_DATA_LEN; + + /* NFCID3 */ + skb_len += NFC_NFCID3_MAXSIZE; + if (target && !target->nfcid2_len) { + nfcid3[0] = 0x1; + nfcid3[1] = 0xfe; + get_random_bytes(nfcid3 + 2, 6); + } + + skb = pn533_alloc_skb(dev, skb_len); + if (!skb) + return -ENOMEM; + + *skb_put(skb, 1) = !comm_mode; /* ActPass */ + *skb_put(skb, 1) = 0x02; /* 424 kbps */ + + next = skb_put(skb, 1); /* Next */ + *next = 0; + + /* Copy passive data */ + memcpy(skb_put(skb, PASSIVE_DATA_LEN), passive_data, PASSIVE_DATA_LEN); + *next |= 1; + + /* Copy NFCID3 (which is NFCID2 from SENSF_RES) */ + if (target && target->nfcid2_len) + memcpy(skb_put(skb, NFC_NFCID3_MAXSIZE), target->nfcid2, + target->nfcid2_len); + else + memcpy(skb_put(skb, NFC_NFCID3_MAXSIZE), nfcid3, + NFC_NFCID3_MAXSIZE); + *next |= 2; + + if (gb != NULL && gb_len > 0) { + memcpy(skb_put(skb, gb_len), gb, gb_len); + *next |= 4; /* We have some Gi */ + } else { + *next = 0; + } + + arg = kmalloc(sizeof(*arg), GFP_KERNEL); + if (!arg) { + dev_kfree_skb(skb); + return -ENOMEM; + } + + *arg = !comm_mode; + + pn533_rf_field(dev->nfc_dev, 0); + + rc = pn533_send_cmd_async(dev, PN533_CMD_IN_JUMP_FOR_DEP, skb, + pn533_in_dep_link_up_complete, arg); + + if (rc < 0) { + dev_kfree_skb(skb); + kfree(arg); + } + + return rc; +} + +static int pn533_dep_link_down(struct nfc_dev *nfc_dev) +{ + struct pn533 *dev = nfc_get_drvdata(nfc_dev); + + dev_dbg(dev->dev, "%s\n", __func__); + + pn533_poll_reset_mod_list(dev); + + if (dev->tgt_mode || dev->tgt_active_prot) + dev->phy_ops->abort_cmd(dev, GFP_KERNEL); + + dev->tgt_active_prot = 0; + dev->tgt_mode = 0; + + skb_queue_purge(&dev->resp_q); + + return 0; +} + +struct pn533_data_exchange_arg { + data_exchange_cb_t cb; + void *cb_context; +}; + +static struct sk_buff *pn533_build_response(struct pn533 *dev) +{ + struct sk_buff *skb, *tmp, *t; + unsigned int skb_len = 0, tmp_len = 0; + + dev_dbg(dev->dev, "%s\n", __func__); + + if (skb_queue_empty(&dev->resp_q)) + return NULL; + + if (skb_queue_len(&dev->resp_q) == 1) { + skb = skb_dequeue(&dev->resp_q); + goto out; + } + + skb_queue_walk_safe(&dev->resp_q, tmp, t) + skb_len += tmp->len; + + dev_dbg(dev->dev, "%s total length %d\n", + __func__, skb_len); + + skb = alloc_skb(skb_len, GFP_KERNEL); + if (skb == NULL) + goto out; + + skb_put(skb, skb_len); + + skb_queue_walk_safe(&dev->resp_q, tmp, t) { + memcpy(skb->data + tmp_len, tmp->data, tmp->len); + tmp_len += tmp->len; + } + +out: + skb_queue_purge(&dev->resp_q); + + return skb; +} + +static int pn533_data_exchange_complete(struct pn533 *dev, void *_arg, + struct sk_buff *resp) +{ + struct pn533_data_exchange_arg *arg = _arg; + struct sk_buff *skb; + int rc = 0; + u8 status, ret, mi; + + dev_dbg(dev->dev, "%s\n", __func__); + + if (IS_ERR(resp)) { + rc = PTR_ERR(resp); + goto _error; + } + + status = resp->data[0]; + ret = status & PN533_CMD_RET_MASK; + mi = status & PN533_CMD_MI_MASK; + + skb_pull(resp, sizeof(status)); + + if (ret != PN533_CMD_RET_SUCCESS) { + nfc_err(dev->dev, + "Exchanging data failed (error 0x%x)\n", ret); + rc = -EIO; + goto error; + } + + skb_queue_tail(&dev->resp_q, resp); + + if (mi) { + dev->cmd_complete_mi_arg = arg; + queue_work(dev->wq, &dev->mi_rx_work); + return -EINPROGRESS; + } + + /* Prepare for the next round */ + if (skb_queue_len(&dev->fragment_skb) > 0) { + dev->cmd_complete_dep_arg = arg; + queue_work(dev->wq, &dev->mi_tx_work); + + return -EINPROGRESS; + } + + skb = pn533_build_response(dev); + if (!skb) { + rc = -ENOMEM; + goto error; + } + + arg->cb(arg->cb_context, skb, 0); + kfree(arg); + return 0; + +error: + dev_kfree_skb(resp); +_error: + skb_queue_purge(&dev->resp_q); + arg->cb(arg->cb_context, NULL, rc); + kfree(arg); + return rc; +} + +/* + * Receive an incoming pn533 frame. skb contains only header and payload. + * If skb == NULL, it is a notification that the link below is dead. + */ +void pn533_recv_frame(struct pn533 *dev, struct sk_buff *skb, int status) +{ + if (!dev->cmd) + goto sched_wq; + + dev->cmd->status = status; + + if (status != 0) { + dev_dbg(dev->dev, "%s: Error received: %d\n", __func__, status); + goto sched_wq; + } + + if (skb == NULL) { + pr_err("NULL Frame -> link is dead\n"); + goto sched_wq; + } + + if (pn533_rx_frame_is_ack(skb->data)) { + dev_dbg(dev->dev, "%s: Received ACK frame\n", __func__); + dev_kfree_skb(skb); + return; + } + + print_hex_dump_debug("PN533 RX: ", DUMP_PREFIX_NONE, 16, 1, skb->data, + dev->ops->rx_frame_size(skb->data), false); + + if (!dev->ops->rx_is_frame_valid(skb->data, dev)) { + nfc_err(dev->dev, "Received an invalid frame\n"); + dev->cmd->status = -EIO; + } else if (!pn533_rx_frame_is_cmd_response(dev, skb->data)) { + nfc_err(dev->dev, "It it not the response to the last command\n"); + dev->cmd->status = -EIO; + } + + dev->cmd->resp = skb; + +sched_wq: + queue_work(dev->wq, &dev->cmd_complete_work); +} +EXPORT_SYMBOL(pn533_recv_frame); + +/* Split the Tx skb into small chunks */ +static int pn533_fill_fragment_skbs(struct pn533 *dev, struct sk_buff *skb) +{ + struct sk_buff *frag; + int frag_size; + + do { + /* Remaining size */ + if (skb->len > PN533_CMD_DATAFRAME_MAXLEN) + frag_size = PN533_CMD_DATAFRAME_MAXLEN; + else + frag_size = skb->len; + + /* Allocate and reserve */ + frag = pn533_alloc_skb(dev, frag_size); + if (!frag) { + skb_queue_purge(&dev->fragment_skb); + break; + } + + if (!dev->tgt_mode) { + /* Reserve the TG/MI byte */ + skb_reserve(frag, 1); + + /* MI + TG */ + if (frag_size == PN533_CMD_DATAFRAME_MAXLEN) + *skb_push(frag, sizeof(u8)) = + (PN533_CMD_MI_MASK | 1); + else + *skb_push(frag, sizeof(u8)) = 1; /* TG */ + } + + memcpy(skb_put(frag, frag_size), skb->data, frag_size); + + /* Reduce the size of incoming buffer */ + skb_pull(skb, frag_size); + + /* Add this to skb_queue */ + skb_queue_tail(&dev->fragment_skb, frag); + + } while (skb->len > 0); + + dev_kfree_skb(skb); + + return skb_queue_len(&dev->fragment_skb); +} + +static int pn533_transceive(struct nfc_dev *nfc_dev, + struct nfc_target *target, struct sk_buff *skb, + data_exchange_cb_t cb, void *cb_context) +{ + struct pn533 *dev = nfc_get_drvdata(nfc_dev); + struct pn533_data_exchange_arg *arg = NULL; + int rc; + + dev_dbg(dev->dev, "%s\n", __func__); + + if (!dev->tgt_active_prot) { + nfc_err(dev->dev, + "Can't exchange data if there is no active target\n"); + rc = -EINVAL; + goto error; + } + + arg = kmalloc(sizeof(*arg), GFP_KERNEL); + if (!arg) { + rc = -ENOMEM; + goto error; + } + + arg->cb = cb; + arg->cb_context = cb_context; + + switch (dev->device_type) { + case PN533_DEVICE_PASORI: + if (dev->tgt_active_prot == NFC_PROTO_FELICA) { + rc = pn533_send_data_async(dev, PN533_CMD_IN_COMM_THRU, + skb, + pn533_data_exchange_complete, + arg); + + break; + } + default: + /* jumbo frame ? */ + if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) { + rc = pn533_fill_fragment_skbs(dev, skb); + if (rc <= 0) + goto error; + + skb = skb_dequeue(&dev->fragment_skb); + if (!skb) { + rc = -EIO; + goto error; + } + } else { + *skb_push(skb, sizeof(u8)) = 1; /* TG */ + } + + rc = pn533_send_data_async(dev, PN533_CMD_IN_DATA_EXCHANGE, + skb, pn533_data_exchange_complete, + arg); + + break; + } + + if (rc < 0) /* rc from send_async */ + goto error; + + return 0; + +error: + kfree(arg); + dev_kfree_skb(skb); + return rc; +} + +static int pn533_tm_send_complete(struct pn533 *dev, void *arg, + struct sk_buff *resp) +{ + u8 status; + + dev_dbg(dev->dev, "%s\n", __func__); + + if (IS_ERR(resp)) + return PTR_ERR(resp); + + status = resp->data[0]; + + /* Prepare for the next round */ + if (skb_queue_len(&dev->fragment_skb) > 0) { + queue_work(dev->wq, &dev->mi_tm_tx_work); + return -EINPROGRESS; + } + dev_kfree_skb(resp); + + if (status != 0) { + nfc_tm_deactivated(dev->nfc_dev); + + dev->tgt_mode = 0; + + return 0; + } + + queue_work(dev->wq, &dev->tg_work); + + return 0; +} + +static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) +{ + struct pn533 *dev = nfc_get_drvdata(nfc_dev); + int rc; + + dev_dbg(dev->dev, "%s\n", __func__); + + /* let's split in multiple chunks if size's too big */ + if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) { + rc = pn533_fill_fragment_skbs(dev, skb); + if (rc <= 0) + goto error; + + /* get the first skb */ + skb = skb_dequeue(&dev->fragment_skb); + if (!skb) { + rc = -EIO; + goto error; + } + + rc = pn533_send_data_async(dev, PN533_CMD_TG_SET_META_DATA, skb, + pn533_tm_send_complete, NULL); + } else { + /* Send th skb */ + rc = pn533_send_data_async(dev, PN533_CMD_TG_SET_DATA, skb, + pn533_tm_send_complete, NULL); + } + +error: + if (rc < 0) { + dev_kfree_skb(skb); + skb_queue_purge(&dev->fragment_skb); + } + + return rc; +} + +static void pn533_wq_mi_recv(struct work_struct *work) +{ + struct pn533 *dev = container_of(work, struct pn533, mi_rx_work); + struct sk_buff *skb; + int rc; + + dev_dbg(dev->dev, "%s\n", __func__); + + skb = pn533_alloc_skb(dev, PN533_CMD_DATAEXCH_HEAD_LEN); + if (!skb) + goto error; + + switch (dev->device_type) { + case PN533_DEVICE_PASORI: + if (dev->tgt_active_prot == NFC_PROTO_FELICA) { + rc = pn533_send_cmd_direct_async(dev, + PN533_CMD_IN_COMM_THRU, + skb, + pn533_data_exchange_complete, + dev->cmd_complete_mi_arg); + + break; + } + default: + *skb_put(skb, sizeof(u8)) = 1; /*TG*/ + + rc = pn533_send_cmd_direct_async(dev, + PN533_CMD_IN_DATA_EXCHANGE, + skb, + pn533_data_exchange_complete, + dev->cmd_complete_mi_arg); + + break; + } + + if (rc == 0) /* success */ + return; + + nfc_err(dev->dev, + "Error %d when trying to perform data_exchange\n", rc); + + dev_kfree_skb(skb); + kfree(dev->cmd_complete_mi_arg); + +error: + dev->phy_ops->send_ack(dev, GFP_KERNEL); + queue_work(dev->wq, &dev->cmd_work); +} + +static void pn533_wq_mi_send(struct work_struct *work) +{ + struct pn533 *dev = container_of(work, struct pn533, mi_tx_work); + struct sk_buff *skb; + int rc; + + dev_dbg(dev->dev, "%s\n", __func__); + + /* Grab the first skb in the queue */ + skb = skb_dequeue(&dev->fragment_skb); + + if (skb == NULL) { /* No more data */ + /* Reset the queue for future use */ + skb_queue_head_init(&dev->fragment_skb); + goto error; + } + + switch (dev->device_type) { + case PN533_DEVICE_PASORI: + if (dev->tgt_active_prot != NFC_PROTO_FELICA) { + rc = -EIO; + break; + } + + rc = pn533_send_cmd_direct_async(dev, PN533_CMD_IN_COMM_THRU, + skb, + pn533_data_exchange_complete, + dev->cmd_complete_dep_arg); + + break; + + default: + /* Still some fragments? */ + rc = pn533_send_cmd_direct_async(dev, + PN533_CMD_IN_DATA_EXCHANGE, + skb, + pn533_data_exchange_complete, + dev->cmd_complete_dep_arg); + + break; + } + + if (rc == 0) /* success */ + return; + + nfc_err(dev->dev, + "Error %d when trying to perform data_exchange\n", rc); + + dev_kfree_skb(skb); + kfree(dev->cmd_complete_dep_arg); + +error: + dev->phy_ops->send_ack(dev, GFP_KERNEL); + queue_work(dev->wq, &dev->cmd_work); +} + +static int pn533_set_configuration(struct pn533 *dev, u8 cfgitem, u8 *cfgdata, + u8 cfgdata_len) +{ + struct sk_buff *skb; + struct sk_buff *resp; + int skb_len; + + dev_dbg(dev->dev, "%s\n", __func__); + + skb_len = sizeof(cfgitem) + cfgdata_len; /* cfgitem + cfgdata */ + + skb = pn533_alloc_skb(dev, skb_len); + if (!skb) + return -ENOMEM; + + *skb_put(skb, sizeof(cfgitem)) = cfgitem; + memcpy(skb_put(skb, cfgdata_len), cfgdata, cfgdata_len); + + resp = pn533_send_cmd_sync(dev, PN533_CMD_RF_CONFIGURATION, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); + + dev_kfree_skb(resp); + return 0; +} + +static int pn533_get_firmware_version(struct pn533 *dev, + struct pn533_fw_version *fv) +{ + struct sk_buff *skb; + struct sk_buff *resp; + + skb = pn533_alloc_skb(dev, 0); + if (!skb) + return -ENOMEM; + + resp = pn533_send_cmd_sync(dev, PN533_CMD_GET_FIRMWARE_VERSION, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); + + fv->ic = resp->data[0]; + fv->ver = resp->data[1]; + fv->rev = resp->data[2]; + fv->support = resp->data[3]; + + dev_kfree_skb(resp); + return 0; +} + +static int pn533_pasori_fw_reset(struct pn533 *dev) +{ + struct sk_buff *skb; + struct sk_buff *resp; + + dev_dbg(dev->dev, "%s\n", __func__); + + skb = pn533_alloc_skb(dev, sizeof(u8)); + if (!skb) + return -ENOMEM; + + *skb_put(skb, sizeof(u8)) = 0x1; + + resp = pn533_send_cmd_sync(dev, 0x18, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); + + dev_kfree_skb(resp); + + return 0; +} + +static int pn533_rf_field(struct nfc_dev *nfc_dev, u8 rf) +{ + struct pn533 *dev = nfc_get_drvdata(nfc_dev); + u8 rf_field = !!rf; + int rc; + + rf_field |= PN533_CFGITEM_RF_FIELD_AUTO_RFCA; + + rc = pn533_set_configuration(dev, PN533_CFGITEM_RF_FIELD, + (u8 *)&rf_field, 1); + if (rc) { + nfc_err(dev->dev, "Error on setting RF field\n"); + return rc; + } + + return rc; +} + +static int pn532_sam_configuration(struct nfc_dev *nfc_dev) +{ + struct pn533 *dev = nfc_get_drvdata(nfc_dev); + struct sk_buff *skb; + struct sk_buff *resp; + + skb = pn533_alloc_skb(dev, 1); + if (!skb) + return -ENOMEM; + + *skb_put(skb, 1) = 0x01; + + resp = pn533_send_cmd_sync(dev, PN533_CMD_SAM_CONFIGURATION, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); + + dev_kfree_skb(resp); + return 0; +} + +static int pn533_dev_up(struct nfc_dev *nfc_dev) +{ + struct pn533 *dev = nfc_get_drvdata(nfc_dev); + + if (dev->device_type == PN533_DEVICE_PN532) { + int rc = pn532_sam_configuration(nfc_dev); + + if (rc) + return rc; + } + + return pn533_rf_field(nfc_dev, 1); +} + +static int pn533_dev_down(struct nfc_dev *nfc_dev) +{ + return pn533_rf_field(nfc_dev, 0); +} + +static struct nfc_ops pn533_nfc_ops = { + .dev_up = pn533_dev_up, + .dev_down = pn533_dev_down, + .dep_link_up = pn533_dep_link_up, + .dep_link_down = pn533_dep_link_down, + .start_poll = pn533_start_poll, + .stop_poll = pn533_stop_poll, + .activate_target = pn533_activate_target, + .deactivate_target = pn533_deactivate_target, + .im_transceive = pn533_transceive, + .tm_send = pn533_tm_send, +}; + +static int pn533_setup(struct pn533 *dev) +{ + struct pn533_config_max_retries max_retries; + struct pn533_config_timing timing; + u8 pasori_cfg[3] = {0x08, 0x01, 0x08}; + int rc; + + switch (dev->device_type) { + case PN533_DEVICE_STD: + case PN533_DEVICE_PASORI: + case PN533_DEVICE_ACR122U: + case PN533_DEVICE_PN532: + max_retries.mx_rty_atr = 0x2; + max_retries.mx_rty_psl = 0x1; + max_retries.mx_rty_passive_act = + PN533_CONFIG_MAX_RETRIES_NO_RETRY; + + timing.rfu = PN533_CONFIG_TIMING_102; + timing.atr_res_timeout = PN533_CONFIG_TIMING_102; + timing.dep_timeout = PN533_CONFIG_TIMING_204; + + break; + + default: + nfc_err(dev->dev, "Unknown device type %d\n", + dev->device_type); + return -EINVAL; + } + + rc = pn533_set_configuration(dev, PN533_CFGITEM_MAX_RETRIES, + (u8 *)&max_retries, sizeof(max_retries)); + if (rc) { + nfc_err(dev->dev, + "Error on setting MAX_RETRIES config\n"); + return rc; + } + + + rc = pn533_set_configuration(dev, PN533_CFGITEM_TIMING, + (u8 *)&timing, sizeof(timing)); + if (rc) { + nfc_err(dev->dev, "Error on setting RF timings\n"); + return rc; + } + + switch (dev->device_type) { + case PN533_DEVICE_STD: + case PN533_DEVICE_PN532: + break; + + case PN533_DEVICE_PASORI: + pn533_pasori_fw_reset(dev); + + rc = pn533_set_configuration(dev, PN533_CFGITEM_PASORI, + pasori_cfg, 3); + if (rc) { + nfc_err(dev->dev, + "Error while settings PASORI config\n"); + return rc; + } + + pn533_pasori_fw_reset(dev); + + break; + } + + return 0; +} + +struct pn533 *pn533_register_device(u32 device_type, + u32 protocols, + enum pn533_protocol_type protocol_type, + void *phy, + struct pn533_phy_ops *phy_ops, + struct pn533_frame_ops *fops, + struct device *dev, + struct device *parent) +{ + struct pn533_fw_version fw_ver; + struct pn533 *priv; + int rc = -ENOMEM; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return ERR_PTR(-ENOMEM); + + priv->phy = phy; + priv->phy_ops = phy_ops; + priv->dev = dev; + if (fops != NULL) + priv->ops = fops; + else + priv->ops = &pn533_std_frame_ops; + + priv->protocol_type = protocol_type; + priv->device_type = device_type; + + mutex_init(&priv->cmd_lock); + + INIT_WORK(&priv->cmd_work, pn533_wq_cmd); + INIT_WORK(&priv->cmd_complete_work, pn533_wq_cmd_complete); + INIT_WORK(&priv->mi_rx_work, pn533_wq_mi_recv); + INIT_WORK(&priv->mi_tx_work, pn533_wq_mi_send); + INIT_WORK(&priv->tg_work, pn533_wq_tg_get_data); + INIT_WORK(&priv->mi_tm_rx_work, pn533_wq_tm_mi_recv); + INIT_WORK(&priv->mi_tm_tx_work, pn533_wq_tm_mi_send); + INIT_DELAYED_WORK(&priv->poll_work, pn533_wq_poll); + INIT_WORK(&priv->rf_work, pn533_wq_rf); + priv->wq = alloc_ordered_workqueue("pn533", 0); + if (priv->wq == NULL) + goto error; + + init_timer(&priv->listen_timer); + priv->listen_timer.data = (unsigned long) priv; + priv->listen_timer.function = pn533_listen_mode_timer; + + skb_queue_head_init(&priv->resp_q); + skb_queue_head_init(&priv->fragment_skb); + + INIT_LIST_HEAD(&priv->cmd_queue); + + memset(&fw_ver, 0, sizeof(fw_ver)); + rc = pn533_get_firmware_version(priv, &fw_ver); + if (rc < 0) + goto destroy_wq; + + nfc_info(dev, "NXP PN5%02X firmware ver %d.%d now attached\n", + fw_ver.ic, fw_ver.ver, fw_ver.rev); + + + priv->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols, + priv->ops->tx_header_len + + PN533_CMD_DATAEXCH_HEAD_LEN, + priv->ops->tx_tail_len); + if (!priv->nfc_dev) { + rc = -ENOMEM; + goto destroy_wq; + } + + nfc_set_parent_dev(priv->nfc_dev, parent); + nfc_set_drvdata(priv->nfc_dev, priv); + + rc = nfc_register_device(priv->nfc_dev); + if (rc) + goto free_nfc_dev; + + rc = pn533_setup(priv); + if (rc) + goto unregister_nfc_dev; + + return priv; + +unregister_nfc_dev: + nfc_unregister_device(priv->nfc_dev); + +free_nfc_dev: + nfc_free_device(priv->nfc_dev); + +destroy_wq: + destroy_workqueue(priv->wq); +error: + kfree(priv); + return ERR_PTR(rc); +} +EXPORT_SYMBOL_GPL(pn533_register_device); + +void pn533_unregister_device(struct pn533 *priv) +{ + struct pn533_cmd *cmd, *n; + + nfc_unregister_device(priv->nfc_dev); + nfc_free_device(priv->nfc_dev); + + flush_delayed_work(&priv->poll_work); + destroy_workqueue(priv->wq); + + skb_queue_purge(&priv->resp_q); + + del_timer(&priv->listen_timer); + + list_for_each_entry_safe(cmd, n, &priv->cmd_queue, queue) { + list_del(&cmd->queue); + kfree(cmd); + } + + kfree(priv); +} +EXPORT_SYMBOL_GPL(pn533_unregister_device); + + +MODULE_AUTHOR("Lauro Ramos Venancio <lauro.venancio@openbossa.org>"); +MODULE_AUTHOR("Aloisio Almeida Jr <aloisio.almeida@openbossa.org>"); +MODULE_AUTHOR("Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>"); +MODULE_DESCRIPTION("PN533 driver ver " VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/nfc/pn533/pn533.h b/drivers/nfc/pn533/pn533.h new file mode 100644 index 0000000..553c7d1 --- /dev/null +++ b/drivers/nfc/pn533/pn533.h @@ -0,0 +1,238 @@ +/* + * Driver for NXP PN533 NFC Chip + * + * Copyright (C) 2011 Instituto Nokia de Tecnologia + * Copyright (C) 2012-2013 Tieto Poland + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#define PN533_DEVICE_STD 0x1 +#define PN533_DEVICE_PASORI 0x2 +#define PN533_DEVICE_ACR122U 0x3 +#define PN533_DEVICE_PN532 0x4 + +#define PN533_ALL_PROTOCOLS (NFC_PROTO_JEWEL_MASK | NFC_PROTO_MIFARE_MASK |\ + NFC_PROTO_FELICA_MASK | NFC_PROTO_ISO14443_MASK |\ + NFC_PROTO_NFC_DEP_MASK |\ + NFC_PROTO_ISO14443_B_MASK) + +#define PN533_NO_TYPE_B_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \ + NFC_PROTO_MIFARE_MASK | \ + NFC_PROTO_FELICA_MASK | \ + NFC_PROTO_ISO14443_MASK | \ + NFC_PROTO_NFC_DEP_MASK) + +/* Standard pn533 frame definitions (standard and extended)*/ +#define PN533_STD_FRAME_HEADER_LEN (sizeof(struct pn533_std_frame) \ + + 2) /* data[0] TFI, data[1] CC */ +#define PN533_STD_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/ + +#define PN533_EXT_FRAME_HEADER_LEN (sizeof(struct pn533_ext_frame) \ + + 2) /* data[0] TFI, data[1] CC */ + +#define PN533_CMD_DATAEXCH_HEAD_LEN 1 +#define PN533_CMD_DATAEXCH_DATA_MAXLEN 262 +#define PN533_CMD_DATAFRAME_MAXLEN 240 /* max data length (send) */ + +/* + * Max extended frame payload len, excluding TFI and CC + * which are already in PN533_FRAME_HEADER_LEN. + */ +#define PN533_STD_FRAME_MAX_PAYLOAD_LEN 263 + + +/* Preamble (1), SoPC (2), ACK Code (2), Postamble (1) */ +#define PN533_STD_FRAME_ACK_SIZE 6 +#define PN533_STD_FRAME_CHECKSUM(f) (f->data[f->datalen]) +#define PN533_STD_FRAME_POSTAMBLE(f) (f->data[f->datalen + 1]) +/* Half start code (3), LEN (4) should be 0xffff for extended frame */ +#define PN533_STD_IS_EXTENDED(hdr) ((hdr)->datalen == 0xFF \ + && (hdr)->datalen_checksum == 0xFF) +#define PN533_EXT_FRAME_CHECKSUM(f) (f->data[be16_to_cpu(f->datalen)]) + +/* start of frame */ +#define PN533_STD_FRAME_SOF 0x00FF + +/* standard frame identifier: in/out/error */ +#define PN533_STD_FRAME_IDENTIFIER(f) (f->data[0]) /* TFI */ +#define PN533_STD_FRAME_DIR_OUT 0xD4 +#define PN533_STD_FRAME_DIR_IN 0xD5 + +/* PN533 Commands */ +#define PN533_FRAME_CMD(f) (f->data[1]) + +#define PN533_CMD_GET_FIRMWARE_VERSION 0x02 +#define PN533_CMD_SAM_CONFIGURATION 0x14 +#define PN533_CMD_RF_CONFIGURATION 0x32 +#define PN533_CMD_IN_DATA_EXCHANGE 0x40 +#define PN533_CMD_IN_COMM_THRU 0x42 +#define PN533_CMD_IN_LIST_PASSIVE_TARGET 0x4A +#define PN533_CMD_IN_ATR 0x50 +#define PN533_CMD_IN_RELEASE 0x52 +#define PN533_CMD_IN_JUMP_FOR_DEP 0x56 + +#define PN533_CMD_TG_INIT_AS_TARGET 0x8c +#define PN533_CMD_TG_GET_DATA 0x86 +#define PN533_CMD_TG_SET_DATA 0x8e +#define PN533_CMD_TG_SET_META_DATA 0x94 +#define PN533_CMD_UNDEF 0xff + +#define PN533_CMD_RESPONSE(cmd) (cmd + 1) + +/* PN533 Return codes */ +#define PN533_CMD_RET_MASK 0x3F +#define PN533_CMD_MI_MASK 0x40 +#define PN533_CMD_RET_SUCCESS 0x00 + + +enum pn533_protocol_type { + PN533_PROTO_REQ_ACK_RESP = 0, + PN533_PROTO_REQ_RESP +}; + +/* Poll modulations */ +enum { + PN533_POLL_MOD_106KBPS_A, + PN533_POLL_MOD_212KBPS_FELICA, + PN533_POLL_MOD_424KBPS_FELICA, + PN533_POLL_MOD_106KBPS_JEWEL, + PN533_POLL_MOD_847KBPS_B, + PN533_LISTEN_MOD, + + __PN533_POLL_MOD_AFTER_LAST, +}; +#define PN533_POLL_MOD_MAX (__PN533_POLL_MOD_AFTER_LAST - 1) + +struct pn533_std_frame { + u8 preamble; + __be16 start_frame; + u8 datalen; + u8 datalen_checksum; + u8 data[]; +} __packed; + +struct pn533_ext_frame { /* Extended Information frame */ + u8 preamble; + __be16 start_frame; + __be16 eif_flag; /* fixed to 0xFFFF */ + __be16 datalen; + u8 datalen_checksum; + u8 data[]; +} __packed; + +struct pn533 { + struct nfc_dev *nfc_dev; + u32 device_type; + enum pn533_protocol_type protocol_type; + + struct sk_buff_head resp_q; + struct sk_buff_head fragment_skb; + + struct workqueue_struct *wq; + struct work_struct cmd_work; + struct work_struct cmd_complete_work; + struct delayed_work poll_work; + struct work_struct mi_rx_work; + struct work_struct mi_tx_work; + struct work_struct mi_tm_rx_work; + struct work_struct mi_tm_tx_work; + struct work_struct tg_work; + struct work_struct rf_work; + + struct list_head cmd_queue; + struct pn533_cmd *cmd; + u8 cmd_pending; + struct mutex cmd_lock; /* protects cmd queue */ + + void *cmd_complete_mi_arg; + void *cmd_complete_dep_arg; + + struct pn533_poll_modulations *poll_mod_active[PN533_POLL_MOD_MAX + 1]; + u8 poll_mod_count; + u8 poll_mod_curr; + u8 poll_dep; + u32 poll_protocols; + u32 listen_protocols; + struct timer_list listen_timer; + int cancel_listen; + + u8 *gb; + size_t gb_len; + + u8 tgt_available_prots; + u8 tgt_active_prot; + u8 tgt_mode; + + struct pn533_frame_ops *ops; + + struct device *dev; + void *phy; + struct pn533_phy_ops *phy_ops; +}; + +typedef int (*pn533_send_async_complete_t) (struct pn533 *dev, void *arg, + struct sk_buff *resp); + +struct pn533_cmd { + struct list_head queue; + u8 code; + int status; + struct sk_buff *req; + struct sk_buff *resp; + pn533_send_async_complete_t complete_cb; + void *complete_cb_context; +}; + + +struct pn533_frame_ops { + void (*tx_frame_init)(void *frame, u8 cmd_code); + void (*tx_frame_finish)(void *frame); + void (*tx_update_payload_len)(void *frame, int len); + int tx_header_len; + int tx_tail_len; + + bool (*rx_is_frame_valid)(void *frame, struct pn533 *dev); + bool (*rx_frame_is_ack)(void *frame); + int (*rx_frame_size)(void *frame); + int rx_header_len; + int rx_tail_len; + + int max_payload_len; + u8 (*get_cmd_code)(void *frame); +}; + + +struct pn533_phy_ops { + int (*send_frame)(struct pn533 *priv, + struct sk_buff *out); + int (*send_ack)(struct pn533 *dev, gfp_t flags); + void (*abort_cmd)(struct pn533 *priv, gfp_t flags); +}; + + +struct pn533 *pn533_register_device(u32 device_type, + u32 protocols, + enum pn533_protocol_type protocol_type, + void *phy, + struct pn533_phy_ops *phy_ops, + struct pn533_frame_ops *fops, + struct device *dev, + struct device *parent); + +void pn533_unregister_device(struct pn533 *priv); +void pn533_recv_frame(struct pn533 *dev, struct sk_buff *skb, int status); + +bool pn533_rx_frame_is_cmd_response(struct pn533 *dev, void *frame); +bool pn533_rx_frame_is_ack(void *_frame); diff --git a/drivers/nfc/pn533/usb.c b/drivers/nfc/pn533/usb.c new file mode 100644 index 0000000..33ed78b --- /dev/null +++ b/drivers/nfc/pn533/usb.c @@ -0,0 +1,594 @@ +/* + * Driver for NXP PN533 NFC Chip - USB transport layer + * + * Copyright (C) 2011 Instituto Nokia de Tecnologia + * Copyright (C) 2012-2013 Tieto Poland + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/nfc.h> +#include <linux/netdevice.h> +#include <net/nfc/nfc.h> +#include "pn533.h" + +#define VERSION "0.1" + +#define PN533_VENDOR_ID 0x4CC +#define PN533_PRODUCT_ID 0x2533 + +#define SCM_VENDOR_ID 0x4E6 +#define SCL3711_PRODUCT_ID 0x5591 + +#define SONY_VENDOR_ID 0x054c +#define PASORI_PRODUCT_ID 0x02e1 + +#define ACS_VENDOR_ID 0x072f +#define ACR122U_PRODUCT_ID 0x2200 + +static const struct usb_device_id pn533_usb_table[] = { + { USB_DEVICE(PN533_VENDOR_ID, PN533_PRODUCT_ID), + .driver_info = PN533_DEVICE_STD }, + { USB_DEVICE(SCM_VENDOR_ID, SCL3711_PRODUCT_ID), + .driver_info = PN533_DEVICE_STD }, + { USB_DEVICE(SONY_VENDOR_ID, PASORI_PRODUCT_ID), + .driver_info = PN533_DEVICE_PASORI }, + { USB_DEVICE(ACS_VENDOR_ID, ACR122U_PRODUCT_ID), + .driver_info = PN533_DEVICE_ACR122U }, + { } +}; +MODULE_DEVICE_TABLE(usb, pn533_usb_table); + +struct pn533_usb_phy { + struct usb_device *udev; + struct usb_interface *interface; + + struct urb *out_urb; + struct urb *in_urb; + + struct pn533 *priv; +}; + +static void pn533_recv_response(struct urb *urb) +{ + struct pn533_usb_phy *phy = urb->context; + struct sk_buff *skb = NULL; + + if (!urb->status) { + skb = alloc_skb(urb->actual_length, GFP_KERNEL); + if (!skb) { + nfc_err(&phy->udev->dev, "failed to alloc memory\n"); + } else { + memcpy(skb_put(skb, urb->actual_length), + urb->transfer_buffer, urb->actual_length); + } + } + + pn533_recv_frame(phy->priv, skb, urb->status); +} + +static int pn533_submit_urb_for_response(struct pn533_usb_phy *phy, gfp_t flags) +{ + phy->in_urb->complete = pn533_recv_response; + + return usb_submit_urb(phy->in_urb, flags); +} + +static void pn533_recv_ack(struct urb *urb) +{ + struct pn533_usb_phy *phy = urb->context; + struct pn533 *priv = phy->priv; + struct pn533_cmd *cmd = priv->cmd; + struct pn533_std_frame *in_frame; + int rc; + + cmd->status = urb->status; + + switch (urb->status) { + case 0: + break; /* success */ + case -ECONNRESET: + case -ENOENT: + dev_dbg(&phy->udev->dev, + "The urb has been stopped (status %d)\n", + urb->status); + goto sched_wq; + case -ESHUTDOWN: + default: + nfc_err(&phy->udev->dev, + "Urb failure (status %d)\n", urb->status); + goto sched_wq; + } + + in_frame = phy->in_urb->transfer_buffer; + + if (!pn533_rx_frame_is_ack(in_frame)) { + nfc_err(&phy->udev->dev, "Received an invalid ack\n"); + cmd->status = -EIO; + goto sched_wq; + } + + rc = pn533_submit_urb_for_response(phy, GFP_ATOMIC); + if (rc) { + nfc_err(&phy->udev->dev, + "usb_submit_urb failed with result %d\n", rc); + cmd->status = rc; + goto sched_wq; + } + + return; + +sched_wq: + queue_work(priv->wq, &priv->cmd_complete_work); +} + +static int pn533_submit_urb_for_ack(struct pn533_usb_phy *phy, gfp_t flags) +{ + phy->in_urb->complete = pn533_recv_ack; + + return usb_submit_urb(phy->in_urb, flags); +} + +static int pn533_usb_send_ack(struct pn533 *dev, gfp_t flags) +{ + struct pn533_usb_phy *phy = dev->phy; + u8 ack[6] = {0x00, 0x00, 0xff, 0x00, 0xff, 0x00}; + /* spec 7.1.1.3: Preamble, SoPC (2), ACK Code (2), Postamble */ + int rc; + + phy->out_urb->transfer_buffer = ack; + phy->out_urb->transfer_buffer_length = sizeof(ack); + rc = usb_submit_urb(phy->out_urb, flags); + + return rc; +} + +static int pn533_usb_send_frame(struct pn533 *dev, + struct sk_buff *out) +{ + struct pn533_usb_phy *phy = dev->phy; + int rc; + + if (phy->priv == NULL) + phy->priv = dev; + + phy->out_urb->transfer_buffer = out->data; + phy->out_urb->transfer_buffer_length = out->len; + + print_hex_dump_debug("PN533 TX: ", DUMP_PREFIX_NONE, 16, 1, + out->data, out->len, false); + + rc = usb_submit_urb(phy->out_urb, GFP_KERNEL); + if (rc) + return rc; + + if (dev->protocol_type == PN533_PROTO_REQ_RESP) { + /* request for response for sent packet directly */ + rc = pn533_submit_urb_for_response(phy, GFP_ATOMIC); + if (rc) + goto error; + } else if (dev->protocol_type == PN533_PROTO_REQ_ACK_RESP) { + /* request for ACK if that's the case */ + rc = pn533_submit_urb_for_ack(phy, GFP_KERNEL); + if (rc) + goto error; + } + + return 0; + +error: + usb_unlink_urb(phy->out_urb); + return rc; +} + +static void pn533_usb_abort_cmd(struct pn533 *dev, gfp_t flags) +{ + struct pn533_usb_phy *phy = dev->phy; + + /* ACR122U does not support any command which aborts last + * issued command i.e. as ACK for standard PN533. Additionally, + * it behaves stange, sending broken or incorrect responses, + * when we cancel urb before the chip will send response. + */ + if (dev->device_type == PN533_DEVICE_ACR122U) + return; + + /* An ack will cancel the last issued command */ + pn533_usb_send_ack(dev, flags); + + /* cancel the urb request */ + usb_kill_urb(phy->in_urb); +} + +/* ACR122 specific structs and fucntions */ + +/* ACS ACR122 pn533 frame definitions */ +#define PN533_ACR122_TX_FRAME_HEADER_LEN (sizeof(struct pn533_acr122_tx_frame) \ + + 2) +#define PN533_ACR122_TX_FRAME_TAIL_LEN 0 +#define PN533_ACR122_RX_FRAME_HEADER_LEN (sizeof(struct pn533_acr122_rx_frame) \ + + 2) +#define PN533_ACR122_RX_FRAME_TAIL_LEN 2 +#define PN533_ACR122_FRAME_MAX_PAYLOAD_LEN PN533_STD_FRAME_MAX_PAYLOAD_LEN + +/* CCID messages types */ +#define PN533_ACR122_PC_TO_RDR_ICCPOWERON 0x62 +#define PN533_ACR122_PC_TO_RDR_ESCAPE 0x6B + +#define PN533_ACR122_RDR_TO_PC_ESCAPE 0x83 + + +struct pn533_acr122_ccid_hdr { + u8 type; + u32 datalen; + u8 slot; + u8 seq; + + /* + * 3 msg specific bytes or status, error and 1 specific + * byte for reposnse msg + */ + u8 params[3]; + u8 data[]; /* payload */ +} __packed; + +struct pn533_acr122_apdu_hdr { + u8 class; + u8 ins; + u8 p1; + u8 p2; +} __packed; + +struct pn533_acr122_tx_frame { + struct pn533_acr122_ccid_hdr ccid; + struct pn533_acr122_apdu_hdr apdu; + u8 datalen; + u8 data[]; /* pn533 frame: TFI ... */ +} __packed; + +struct pn533_acr122_rx_frame { + struct pn533_acr122_ccid_hdr ccid; + u8 data[]; /* pn533 frame : TFI ... */ +} __packed; + +static void pn533_acr122_tx_frame_init(void *_frame, u8 cmd_code) +{ + struct pn533_acr122_tx_frame *frame = _frame; + + frame->ccid.type = PN533_ACR122_PC_TO_RDR_ESCAPE; + /* sizeof(apdu_hdr) + sizeof(datalen) */ + frame->ccid.datalen = sizeof(frame->apdu) + 1; + frame->ccid.slot = 0; + frame->ccid.seq = 0; + frame->ccid.params[0] = 0; + frame->ccid.params[1] = 0; + frame->ccid.params[2] = 0; + + frame->data[0] = PN533_STD_FRAME_DIR_OUT; + frame->data[1] = cmd_code; + frame->datalen = 2; /* data[0] + data[1] */ + + frame->apdu.class = 0xFF; + frame->apdu.ins = 0; + frame->apdu.p1 = 0; + frame->apdu.p2 = 0; +} + +static void pn533_acr122_tx_frame_finish(void *_frame) +{ + struct pn533_acr122_tx_frame *frame = _frame; + + frame->ccid.datalen += frame->datalen; +} + +static void pn533_acr122_tx_update_payload_len(void *_frame, int len) +{ + struct pn533_acr122_tx_frame *frame = _frame; + + frame->datalen += len; +} + +static bool pn533_acr122_is_rx_frame_valid(void *_frame, struct pn533 *dev) +{ + struct pn533_acr122_rx_frame *frame = _frame; + + if (frame->ccid.type != 0x83) + return false; + + if (!frame->ccid.datalen) + return false; + + if (frame->data[frame->ccid.datalen - 2] == 0x63) + return false; + + return true; +} + +static int pn533_acr122_rx_frame_size(void *frame) +{ + struct pn533_acr122_rx_frame *f = frame; + + /* f->ccid.datalen already includes tail length */ + return sizeof(struct pn533_acr122_rx_frame) + f->ccid.datalen; +} + +static u8 pn533_acr122_get_cmd_code(void *frame) +{ + struct pn533_acr122_rx_frame *f = frame; + + return PN533_FRAME_CMD(f); +} + +static struct pn533_frame_ops pn533_acr122_frame_ops = { + .tx_frame_init = pn533_acr122_tx_frame_init, + .tx_frame_finish = pn533_acr122_tx_frame_finish, + .tx_update_payload_len = pn533_acr122_tx_update_payload_len, + .tx_header_len = PN533_ACR122_TX_FRAME_HEADER_LEN, + .tx_tail_len = PN533_ACR122_TX_FRAME_TAIL_LEN, + + .rx_is_frame_valid = pn533_acr122_is_rx_frame_valid, + .rx_header_len = PN533_ACR122_RX_FRAME_HEADER_LEN, + .rx_tail_len = PN533_ACR122_RX_FRAME_TAIL_LEN, + .rx_frame_size = pn533_acr122_rx_frame_size, + + .max_payload_len = PN533_ACR122_FRAME_MAX_PAYLOAD_LEN, + .get_cmd_code = pn533_acr122_get_cmd_code, +}; + +struct pn533_acr122_poweron_rdr_arg { + int rc; + struct completion done; +}; + +static void pn533_acr122_poweron_rdr_resp(struct urb *urb) +{ + struct pn533_acr122_poweron_rdr_arg *arg = urb->context; + + dev_dbg(&urb->dev->dev, "%s\n", __func__); + + print_hex_dump_debug("ACR122 RX: ", DUMP_PREFIX_NONE, 16, 1, + urb->transfer_buffer, urb->transfer_buffer_length, + false); + + arg->rc = urb->status; + complete(&arg->done); +} + +static int pn533_acr122_poweron_rdr(struct pn533_usb_phy *phy) +{ + /* Power on th reader (CCID cmd) */ + u8 cmd[10] = {PN533_ACR122_PC_TO_RDR_ICCPOWERON, + 0, 0, 0, 0, 0, 0, 3, 0, 0}; + int rc; + void *cntx; + struct pn533_acr122_poweron_rdr_arg arg; + + dev_dbg(&phy->udev->dev, "%s\n", __func__); + + init_completion(&arg.done); + cntx = phy->in_urb->context; /* backup context */ + + phy->in_urb->complete = pn533_acr122_poweron_rdr_resp; + phy->in_urb->context = &arg; + + phy->out_urb->transfer_buffer = cmd; + phy->out_urb->transfer_buffer_length = sizeof(cmd); + + print_hex_dump_debug("ACR122 TX: ", DUMP_PREFIX_NONE, 16, 1, + cmd, sizeof(cmd), false); + + rc = usb_submit_urb(phy->out_urb, GFP_KERNEL); + if (rc) { + nfc_err(&phy->udev->dev, + "Reader power on cmd error %d\n", rc); + return rc; + } + + rc = usb_submit_urb(phy->in_urb, GFP_KERNEL); + if (rc) { + nfc_err(&phy->udev->dev, + "Can't submit reader poweron cmd response %d\n", rc); + return rc; + } + + wait_for_completion(&arg.done); + phy->in_urb->context = cntx; /* restore context */ + + return arg.rc; +} + +static void pn533_send_complete(struct urb *urb) +{ + struct pn533_usb_phy *phy = urb->context; + + switch (urb->status) { + case 0: + break; /* success */ + case -ECONNRESET: + case -ENOENT: + dev_dbg(&phy->udev->dev, + "The urb has been stopped (status %d)\n", + urb->status); + break; + case -ESHUTDOWN: + default: + nfc_err(&phy->udev->dev, + "Urb failure (status %d)\n", + urb->status); + } +} + +static struct pn533_phy_ops usb_phy_ops = { + .send_frame = pn533_usb_send_frame, + .send_ack = pn533_usb_send_ack, + .abort_cmd = pn533_usb_abort_cmd, +}; + +static int pn533_usb_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct pn533 *priv; + struct pn533_usb_phy *phy; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + int in_endpoint = 0; + int out_endpoint = 0; + int rc = -ENOMEM; + int i; + u32 protocols; + enum pn533_protocol_type protocol_type = PN533_PROTO_REQ_ACK_RESP; + struct pn533_frame_ops *fops = NULL; + unsigned char *in_buf; + int in_buf_len = PN533_EXT_FRAME_HEADER_LEN + + PN533_STD_FRAME_MAX_PAYLOAD_LEN + + PN533_STD_FRAME_TAIL_LEN; + + phy = devm_kzalloc(&interface->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + in_buf = kzalloc(in_buf_len, GFP_KERNEL); + if (!in_buf) + return -ENOMEM; + + phy->udev = usb_get_dev(interface_to_usbdev(interface)); + phy->interface = interface; + + iface_desc = interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint)) + in_endpoint = endpoint->bEndpointAddress; + + if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint)) + out_endpoint = endpoint->bEndpointAddress; + } + + if (!in_endpoint || !out_endpoint) { + nfc_err(&interface->dev, + "Could not find bulk-in or bulk-out endpoint\n"); + rc = -ENODEV; + goto error; + } + + phy->in_urb = usb_alloc_urb(0, GFP_KERNEL); + phy->out_urb = usb_alloc_urb(0, GFP_KERNEL); + + if (!phy->in_urb || !phy->out_urb) + goto error; + + usb_fill_bulk_urb(phy->in_urb, phy->udev, + usb_rcvbulkpipe(phy->udev, in_endpoint), + in_buf, in_buf_len, NULL, phy); + + usb_fill_bulk_urb(phy->out_urb, phy->udev, + usb_sndbulkpipe(phy->udev, out_endpoint), + NULL, 0, pn533_send_complete, phy); + + + switch (id->driver_info) { + case PN533_DEVICE_STD: + protocols = PN533_ALL_PROTOCOLS; + break; + + case PN533_DEVICE_PASORI: + protocols = PN533_NO_TYPE_B_PROTOCOLS; + break; + + case PN533_DEVICE_ACR122U: + protocols = PN533_NO_TYPE_B_PROTOCOLS; + fops = &pn533_acr122_frame_ops; + protocol_type = PN533_PROTO_REQ_RESP, + + rc = pn533_acr122_poweron_rdr(phy); + if (rc < 0) { + nfc_err(&interface->dev, + "Couldn't poweron the reader (error %d)\n", rc); + goto error; + } + break; + + default: + nfc_err(&interface->dev, "Unknown device type %lu\n", + id->driver_info); + rc = -EINVAL; + goto error; + } + + priv = pn533_register_device(id->driver_info, protocols, protocol_type, + phy, &usb_phy_ops, fops, + &phy->udev->dev, &interface->dev); + + if (IS_ERR(priv)) { + rc = PTR_ERR(priv); + goto error; + } + + phy->priv = priv; + + usb_set_intfdata(interface, phy); + + return 0; + +error: + usb_free_urb(phy->in_urb); + usb_free_urb(phy->out_urb); + usb_put_dev(phy->udev); + kfree(in_buf); + + return rc; +} + +static void pn533_usb_disconnect(struct usb_interface *interface) +{ + struct pn533_usb_phy *phy = usb_get_intfdata(interface); + + if (!phy) + return; + + pn533_unregister_device(phy->priv); + + usb_set_intfdata(interface, NULL); + + usb_kill_urb(phy->in_urb); + usb_kill_urb(phy->out_urb); + + kfree(phy->in_urb->transfer_buffer); + usb_free_urb(phy->in_urb); + usb_free_urb(phy->out_urb); + + nfc_info(&interface->dev, "NXP PN533 NFC device disconnected\n"); +} + +static struct usb_driver pn533_usb_driver = { + .name = "pn533_usb", + .probe = pn533_usb_probe, + .disconnect = pn533_usb_disconnect, + .id_table = pn533_usb_table, +}; + +module_usb_driver(pn533_usb_driver); + +MODULE_AUTHOR("Lauro Ramos Venancio <lauro.venancio@openbossa.org>"); +MODULE_AUTHOR("Aloisio Almeida Jr <aloisio.almeida@openbossa.org>"); +MODULE_AUTHOR("Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>"); +MODULE_DESCRIPTION("PN533 USB driver ver " VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/nfc/pn544/Kconfig b/drivers/nfc/pn544/Kconfig new file mode 100644 index 0000000..d8d6a24 --- /dev/null +++ b/drivers/nfc/pn544/Kconfig @@ -0,0 +1,35 @@ +config NFC_PN544 + tristate + depends on m + depends on CRC_CCITT + ---help--- + NXP PN544 core driver. + This is a driver based on the HCI NFC kernel layers and + will thus not work with NXP libnfc library. + +config NFC_PN544_I2C + depends on !KERNEL_3_17 + depends on !KERNEL_3_13 + tristate "NXP PN544 device support (I2C)" + depends on m + depends on NFC_HCI && I2C && NFC_SHDLC + select NFC_PN544 + ---help--- + This module adds support for the NXP pn544 i2c interface. + Select this if your platform is using the i2c bus. + + If you choose to build a module, it'll be called pn544_i2c. + Say N if unsure. + +config NFC_PN544_MEI + tristate "NXP PN544 device support (MEI)" + depends on m + depends on NFC_HCI && NFC_MEI_PHY + select NFC_PN544 + ---help--- + This module adds support for the mei interface of adapters using + NXP pn544 chipsets. Select this if your pn544 chipset + is handled by Intel's Management Engine Interface on your platform. + + If you choose to build a module, it'll be called pn544_mei. + Say N if unsure. diff --git a/drivers/nfc/pn544/Makefile b/drivers/nfc/pn544/Makefile new file mode 100644 index 0000000..c12e83c --- /dev/null +++ b/drivers/nfc/pn544/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for PN544 HCI based NFC driver +# + +pn544_i2c-objs = i2c.o +pn544_mei-objs = mei.o + +obj-$(CPTCFG_NFC_PN544) += pn544.o +obj-$(CPTCFG_NFC_PN544_I2C) += pn544_i2c.o +obj-$(CPTCFG_NFC_PN544_MEI) += pn544_mei.o diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c new file mode 100644 index 0000000..f837c39 --- /dev/null +++ b/drivers/nfc/pn544/i2c.c @@ -0,0 +1,1120 @@ +/* + * I2C Link Layer for PN544 HCI based Driver + * + * Copyright (C) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/crc-ccitt.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/of_irq.h> +#include <linux/acpi.h> +#include <linux/miscdevice.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/nfc.h> +#include <linux/firmware.h> +#include <linux/gpio/consumer.h> +#include <linux/platform_data/pn544.h> +#include <asm/unaligned.h> + +#include <net/nfc/hci.h> +#include <net/nfc/llc.h> +#include <net/nfc/nfc.h> + +#include "pn544.h" + +#define PN544_I2C_FRAME_HEADROOM 1 +#define PN544_I2C_FRAME_TAILROOM 2 + +/* GPIO names */ +#define PN544_GPIO_NAME_IRQ "pn544_irq" +#define PN544_GPIO_NAME_FW "pn544_fw" +#define PN544_GPIO_NAME_EN "pn544_en" + +/* framing in HCI mode */ +#define PN544_HCI_I2C_LLC_LEN 1 +#define PN544_HCI_I2C_LLC_CRC 2 +#define PN544_HCI_I2C_LLC_LEN_CRC (PN544_HCI_I2C_LLC_LEN + \ + PN544_HCI_I2C_LLC_CRC) +#define PN544_HCI_I2C_LLC_MIN_SIZE (1 + PN544_HCI_I2C_LLC_LEN_CRC) +#define PN544_HCI_I2C_LLC_MAX_PAYLOAD 29 +#define PN544_HCI_I2C_LLC_MAX_SIZE (PN544_HCI_I2C_LLC_LEN_CRC + 1 + \ + PN544_HCI_I2C_LLC_MAX_PAYLOAD) + +static struct i2c_device_id pn544_hci_i2c_id_table[] = { + {"pn544", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table); + +static const struct acpi_device_id pn544_hci_i2c_acpi_match[] = { + {"NXP5440", 0}, + {} +}; + +MODULE_DEVICE_TABLE(acpi, pn544_hci_i2c_acpi_match); + +#define PN544_HCI_I2C_DRIVER_NAME "pn544_hci_i2c" + +/* + * Exposed through the 4 most significant bytes + * from the HCI SW_VERSION first byte, a.k.a. + * SW RomLib. + */ +#define PN544_HW_VARIANT_C2 0xa +#define PN544_HW_VARIANT_C3 0xb + +#define PN544_FW_CMD_RESET 0x01 +#define PN544_FW_CMD_WRITE 0x08 +#define PN544_FW_CMD_CHECK 0x06 +#define PN544_FW_CMD_SECURE_WRITE 0x0C +#define PN544_FW_CMD_SECURE_CHUNK_WRITE 0x0D + +struct pn544_i2c_fw_frame_write { + u8 cmd; + u16 be_length; + u8 be_dest_addr[3]; + u16 be_datalen; + u8 data[]; +} __packed; + +struct pn544_i2c_fw_frame_check { + u8 cmd; + u16 be_length; + u8 be_start_addr[3]; + u16 be_datalen; + u16 be_crc; +} __packed; + +struct pn544_i2c_fw_frame_response { + u8 status; + u16 be_length; +} __packed; + +struct pn544_i2c_fw_blob { + u32 be_size; + u32 be_destaddr; + u8 data[]; +}; + +struct pn544_i2c_fw_secure_frame { + u8 cmd; + u16 be_datalen; + u8 data[]; +} __packed; + +struct pn544_i2c_fw_secure_blob { + u64 header; + u8 data[]; +}; + +#define PN544_FW_CMD_RESULT_TIMEOUT 0x01 +#define PN544_FW_CMD_RESULT_BAD_CRC 0x02 +#define PN544_FW_CMD_RESULT_ACCESS_DENIED 0x08 +#define PN544_FW_CMD_RESULT_PROTOCOL_ERROR 0x0B +#define PN544_FW_CMD_RESULT_INVALID_PARAMETER 0x11 +#define PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND 0x13 +#define PN544_FW_CMD_RESULT_INVALID_LENGTH 0x18 +#define PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR 0x19 +#define PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR 0x1D +#define PN544_FW_CMD_RESULT_MEMORY_ERROR 0x20 +#define PN544_FW_CMD_RESULT_CHUNK_OK 0x21 +#define PN544_FW_CMD_RESULT_WRITE_FAILED 0x74 +#define PN544_FW_CMD_RESULT_COMMAND_REJECTED 0xE0 +#define PN544_FW_CMD_RESULT_CHUNK_ERROR 0xE6 + +#define MIN(X, Y) ((X) < (Y) ? (X) : (Y)) + +#define PN544_FW_WRITE_BUFFER_MAX_LEN 0x9f7 +#define PN544_FW_I2C_MAX_PAYLOAD PN544_HCI_I2C_LLC_MAX_SIZE +#define PN544_FW_I2C_WRITE_FRAME_HEADER_LEN 8 +#define PN544_FW_I2C_WRITE_DATA_MAX_LEN MIN((PN544_FW_I2C_MAX_PAYLOAD -\ + PN544_FW_I2C_WRITE_FRAME_HEADER_LEN),\ + PN544_FW_WRITE_BUFFER_MAX_LEN) +#define PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN 3 +#define PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN (PN544_FW_I2C_MAX_PAYLOAD -\ + PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN) +#define PN544_FW_SECURE_FRAME_HEADER_LEN 3 +#define PN544_FW_SECURE_BLOB_HEADER_LEN 8 + +#define FW_WORK_STATE_IDLE 1 +#define FW_WORK_STATE_START 2 +#define FW_WORK_STATE_WAIT_WRITE_ANSWER 3 +#define FW_WORK_STATE_WAIT_CHECK_ANSWER 4 +#define FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER 5 + +struct pn544_i2c_phy { + struct i2c_client *i2c_dev; + struct nfc_hci_dev *hdev; + + unsigned int gpio_en; + unsigned int gpio_fw; + unsigned int en_polarity; + + u8 hw_variant; + + struct work_struct fw_work; + int fw_work_state; + char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1]; + const struct firmware *fw; + u32 fw_blob_dest_addr; + size_t fw_blob_size; + const u8 *fw_blob_data; + size_t fw_written; + size_t fw_size; + + int fw_cmd_result; + + int powered; + int run_mode; + + int hard_fault; /* + * < 0 if hardware error occured (e.g. i2c err) + * and prevents normal operation. + */ +}; + +#define I2C_DUMP_SKB(info, skb) \ +do { \ + pr_debug("%s:\n", info); \ + print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \ + 16, 1, (skb)->data, (skb)->len, 0); \ +} while (0) + +static void pn544_hci_i2c_platform_init(struct pn544_i2c_phy *phy) +{ + int polarity, retry, ret; + char rset_cmd[] = { 0x05, 0xF9, 0x04, 0x00, 0xC3, 0xE5 }; + int count = sizeof(rset_cmd); + + nfc_info(&phy->i2c_dev->dev, "Detecting nfc_en polarity\n"); + + /* Disable fw download */ + gpio_set_value_cansleep(phy->gpio_fw, 0); + + for (polarity = 0; polarity < 2; polarity++) { + phy->en_polarity = polarity; + retry = 3; + while (retry--) { + /* power off */ + gpio_set_value_cansleep(phy->gpio_en, + !phy->en_polarity); + usleep_range(10000, 15000); + + /* power on */ + gpio_set_value_cansleep(phy->gpio_en, phy->en_polarity); + usleep_range(10000, 15000); + + /* send reset */ + dev_dbg(&phy->i2c_dev->dev, "Sending reset cmd\n"); + ret = i2c_master_send(phy->i2c_dev, rset_cmd, count); + if (ret == count) { + nfc_info(&phy->i2c_dev->dev, + "nfc_en polarity : active %s\n", + (polarity == 0 ? "low" : "high")); + goto out; + } + } + } + + nfc_err(&phy->i2c_dev->dev, + "Could not detect nfc_en polarity, fallback to active high\n"); + +out: + gpio_set_value_cansleep(phy->gpio_en, !phy->en_polarity); +} + +static void pn544_hci_i2c_enable_mode(struct pn544_i2c_phy *phy, int run_mode) +{ + gpio_set_value_cansleep(phy->gpio_fw, + run_mode == PN544_FW_MODE ? 1 : 0); + gpio_set_value_cansleep(phy->gpio_en, phy->en_polarity); + usleep_range(10000, 15000); + + phy->run_mode = run_mode; +} + +static int pn544_hci_i2c_enable(void *phy_id) +{ + struct pn544_i2c_phy *phy = phy_id; + + pr_info("%s\n", __func__); + + pn544_hci_i2c_enable_mode(phy, PN544_HCI_MODE); + + phy->powered = 1; + + return 0; +} + +static void pn544_hci_i2c_disable(void *phy_id) +{ + struct pn544_i2c_phy *phy = phy_id; + + gpio_set_value_cansleep(phy->gpio_fw, 0); + gpio_set_value_cansleep(phy->gpio_en, !phy->en_polarity); + usleep_range(10000, 15000); + + gpio_set_value_cansleep(phy->gpio_en, phy->en_polarity); + usleep_range(10000, 15000); + + gpio_set_value_cansleep(phy->gpio_en, !phy->en_polarity); + usleep_range(10000, 15000); + + phy->powered = 0; +} + +static void pn544_hci_i2c_add_len_crc(struct sk_buff *skb) +{ + u16 crc; + int len; + + len = skb->len + 2; + *skb_push(skb, 1) = len; + + crc = crc_ccitt(0xffff, skb->data, skb->len); + crc = ~crc; + *skb_put(skb, 1) = crc & 0xff; + *skb_put(skb, 1) = crc >> 8; +} + +static void pn544_hci_i2c_remove_len_crc(struct sk_buff *skb) +{ + skb_pull(skb, PN544_I2C_FRAME_HEADROOM); + skb_trim(skb, PN544_I2C_FRAME_TAILROOM); +} + +/* + * Writing a frame must not return the number of written bytes. + * It must return either zero for success, or <0 for error. + * In addition, it must not alter the skb + */ +static int pn544_hci_i2c_write(void *phy_id, struct sk_buff *skb) +{ + int r; + struct pn544_i2c_phy *phy = phy_id; + struct i2c_client *client = phy->i2c_dev; + + if (phy->hard_fault != 0) + return phy->hard_fault; + + usleep_range(3000, 6000); + + pn544_hci_i2c_add_len_crc(skb); + + I2C_DUMP_SKB("i2c frame written", skb); + + r = i2c_master_send(client, skb->data, skb->len); + + if (r == -EREMOTEIO) { /* Retry, chip was in standby */ + usleep_range(6000, 10000); + r = i2c_master_send(client, skb->data, skb->len); + } + + if (r >= 0) { + if (r != skb->len) + r = -EREMOTEIO; + else + r = 0; + } + + pn544_hci_i2c_remove_len_crc(skb); + + return r; +} + +static int check_crc(u8 *buf, int buflen) +{ + int len; + u16 crc; + + len = buf[0] + 1; + crc = crc_ccitt(0xffff, buf, len - 2); + crc = ~crc; + + if (buf[len - 2] != (crc & 0xff) || buf[len - 1] != (crc >> 8)) { + pr_err("CRC error 0x%x != 0x%x 0x%x\n", + crc, buf[len - 1], buf[len - 2]); + pr_info("%s: BAD CRC\n", __func__); + print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE, + 16, 2, buf, buflen, false); + return -EPERM; + } + return 0; +} + +/* + * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees + * that i2c bus will be flushed and that next read will start on a new frame. + * returned skb contains only LLC header and payload. + * returns: + * -EREMOTEIO : i2c read error (fatal) + * -EBADMSG : frame was incorrect and discarded + * -ENOMEM : cannot allocate skb, frame dropped + */ +static int pn544_hci_i2c_read(struct pn544_i2c_phy *phy, struct sk_buff **skb) +{ + int r; + u8 len; + u8 tmp[PN544_HCI_I2C_LLC_MAX_SIZE - 1]; + struct i2c_client *client = phy->i2c_dev; + + r = i2c_master_recv(client, &len, 1); + if (r != 1) { + nfc_err(&client->dev, "cannot read len byte\n"); + return -EREMOTEIO; + } + + if ((len < (PN544_HCI_I2C_LLC_MIN_SIZE - 1)) || + (len > (PN544_HCI_I2C_LLC_MAX_SIZE - 1))) { + nfc_err(&client->dev, "invalid len byte\n"); + r = -EBADMSG; + goto flush; + } + + *skb = alloc_skb(1 + len, GFP_KERNEL); + if (*skb == NULL) { + r = -ENOMEM; + goto flush; + } + + *skb_put(*skb, 1) = len; + + r = i2c_master_recv(client, skb_put(*skb, len), len); + if (r != len) { + kfree_skb(*skb); + return -EREMOTEIO; + } + + I2C_DUMP_SKB("i2c frame read", *skb); + + r = check_crc((*skb)->data, (*skb)->len); + if (r != 0) { + kfree_skb(*skb); + r = -EBADMSG; + goto flush; + } + + skb_pull(*skb, 1); + skb_trim(*skb, (*skb)->len - 2); + + usleep_range(3000, 6000); + + return 0; + +flush: + if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0) + r = -EREMOTEIO; + + usleep_range(3000, 6000); + + return r; +} + +static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy) +{ + int r; + struct pn544_i2c_fw_frame_response response; + struct i2c_client *client = phy->i2c_dev; + + r = i2c_master_recv(client, (char *) &response, sizeof(response)); + if (r != sizeof(response)) { + nfc_err(&client->dev, "cannot read fw status\n"); + return -EIO; + } + + usleep_range(3000, 6000); + + switch (response.status) { + case 0: + return 0; + case PN544_FW_CMD_RESULT_CHUNK_OK: + return response.status; + case PN544_FW_CMD_RESULT_TIMEOUT: + return -ETIMEDOUT; + case PN544_FW_CMD_RESULT_BAD_CRC: + return -ENODATA; + case PN544_FW_CMD_RESULT_ACCESS_DENIED: + return -EACCES; + case PN544_FW_CMD_RESULT_PROTOCOL_ERROR: + return -EPROTO; + case PN544_FW_CMD_RESULT_INVALID_PARAMETER: + return -EINVAL; + case PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND: + return -ENOTSUPP; + case PN544_FW_CMD_RESULT_INVALID_LENGTH: + return -EBADMSG; + case PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR: + return -ENOKEY; + case PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR: + return -EINVAL; + case PN544_FW_CMD_RESULT_MEMORY_ERROR: + return -ENOMEM; + case PN544_FW_CMD_RESULT_COMMAND_REJECTED: + return -EACCES; + case PN544_FW_CMD_RESULT_WRITE_FAILED: + case PN544_FW_CMD_RESULT_CHUNK_ERROR: + return -EIO; + default: + return -EIO; + } +} + +/* + * Reads an shdlc frame from the chip. This is not as straightforward as it + * seems. There are cases where we could loose the frame start synchronization. + * The frame format is len-data-crc, and corruption can occur anywhere while + * transiting on i2c bus, such that we could read an invalid len. + * In order to recover synchronization with the next frame, we must be sure + * to read the real amount of data without using the len byte. We do this by + * assuming the following: + * - the chip will always present only one single complete frame on the bus + * before triggering the interrupt + * - the chip will not present a new frame until we have completely read + * the previous one (or until we have handled the interrupt). + * The tricky case is when we read a corrupted len that is less than the real + * len. We must detect this here in order to determine that we need to flush + * the bus. This is the reason why we check the crc here. + */ +static irqreturn_t pn544_hci_i2c_irq_thread_fn(int irq, void *phy_id) +{ + struct pn544_i2c_phy *phy = phy_id; + struct i2c_client *client; + struct sk_buff *skb = NULL; + int r; + + if (!phy || irq != phy->i2c_dev->irq) { + WARN_ON_ONCE(1); + return IRQ_NONE; + } + + client = phy->i2c_dev; + dev_dbg(&client->dev, "IRQ\n"); + + if (phy->hard_fault != 0) + return IRQ_HANDLED; + + if (phy->run_mode == PN544_FW_MODE) { + phy->fw_cmd_result = pn544_hci_i2c_fw_read_status(phy); + schedule_work(&phy->fw_work); + } else { + r = pn544_hci_i2c_read(phy, &skb); + if (r == -EREMOTEIO) { + phy->hard_fault = r; + + nfc_hci_recv_frame(phy->hdev, NULL); + + return IRQ_HANDLED; + } else if ((r == -ENOMEM) || (r == -EBADMSG)) { + return IRQ_HANDLED; + } + + nfc_hci_recv_frame(phy->hdev, skb); + } + return IRQ_HANDLED; +} + +static struct nfc_phy_ops i2c_phy_ops = { + .write = pn544_hci_i2c_write, + .enable = pn544_hci_i2c_enable, + .disable = pn544_hci_i2c_disable, +}; + +static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name, + u8 hw_variant) +{ + struct pn544_i2c_phy *phy = phy_id; + + pr_info("Starting Firmware Download (%s)\n", firmware_name); + + strcpy(phy->firmware_name, firmware_name); + + phy->hw_variant = hw_variant; + phy->fw_work_state = FW_WORK_STATE_START; + + schedule_work(&phy->fw_work); + + return 0; +} + +static void pn544_hci_i2c_fw_work_complete(struct pn544_i2c_phy *phy, + int result) +{ + pr_info("Firmware Download Complete, result=%d\n", result); + + pn544_hci_i2c_disable(phy); + + phy->fw_work_state = FW_WORK_STATE_IDLE; + + if (phy->fw) { + release_firmware(phy->fw); + phy->fw = NULL; + } + + nfc_fw_download_done(phy->hdev->ndev, phy->firmware_name, (u32) -result); +} + +static int pn544_hci_i2c_fw_write_cmd(struct i2c_client *client, u32 dest_addr, + const u8 *data, u16 datalen) +{ + u8 frame[PN544_FW_I2C_MAX_PAYLOAD]; + struct pn544_i2c_fw_frame_write *framep; + u16 params_len; + int framelen; + int r; + + if (datalen > PN544_FW_I2C_WRITE_DATA_MAX_LEN) + datalen = PN544_FW_I2C_WRITE_DATA_MAX_LEN; + + framep = (struct pn544_i2c_fw_frame_write *) frame; + + params_len = sizeof(framep->be_dest_addr) + + sizeof(framep->be_datalen) + datalen; + framelen = params_len + sizeof(framep->cmd) + + sizeof(framep->be_length); + + framep->cmd = PN544_FW_CMD_WRITE; + + put_unaligned_be16(params_len, &framep->be_length); + + framep->be_dest_addr[0] = (dest_addr & 0xff0000) >> 16; + framep->be_dest_addr[1] = (dest_addr & 0xff00) >> 8; + framep->be_dest_addr[2] = dest_addr & 0xff; + + put_unaligned_be16(datalen, &framep->be_datalen); + + memcpy(framep->data, data, datalen); + + r = i2c_master_send(client, frame, framelen); + + if (r == framelen) + return datalen; + else if (r < 0) + return r; + else + return -EIO; +} + +static int pn544_hci_i2c_fw_check_cmd(struct i2c_client *client, u32 start_addr, + const u8 *data, u16 datalen) +{ + struct pn544_i2c_fw_frame_check frame; + int r; + u16 crc; + + /* calculate local crc for the data we want to check */ + crc = crc_ccitt(0xffff, data, datalen); + + frame.cmd = PN544_FW_CMD_CHECK; + + put_unaligned_be16(sizeof(frame.be_start_addr) + + sizeof(frame.be_datalen) + sizeof(frame.be_crc), + &frame.be_length); + + /* tell the chip the memory region to which our crc applies */ + frame.be_start_addr[0] = (start_addr & 0xff0000) >> 16; + frame.be_start_addr[1] = (start_addr & 0xff00) >> 8; + frame.be_start_addr[2] = start_addr & 0xff; + + put_unaligned_be16(datalen, &frame.be_datalen); + + /* + * and give our local crc. Chip will calculate its own crc for the + * region and compare with ours. + */ + put_unaligned_be16(crc, &frame.be_crc); + + r = i2c_master_send(client, (const char *) &frame, sizeof(frame)); + + if (r == sizeof(frame)) + return 0; + else if (r < 0) + return r; + else + return -EIO; +} + +static int pn544_hci_i2c_fw_write_chunk(struct pn544_i2c_phy *phy) +{ + int r; + + r = pn544_hci_i2c_fw_write_cmd(phy->i2c_dev, + phy->fw_blob_dest_addr + phy->fw_written, + phy->fw_blob_data + phy->fw_written, + phy->fw_blob_size - phy->fw_written); + if (r < 0) + return r; + + phy->fw_written += r; + phy->fw_work_state = FW_WORK_STATE_WAIT_WRITE_ANSWER; + + return 0; +} + +static int pn544_hci_i2c_fw_secure_write_frame_cmd(struct pn544_i2c_phy *phy, + const u8 *data, u16 datalen) +{ + u8 buf[PN544_FW_I2C_MAX_PAYLOAD]; + struct pn544_i2c_fw_secure_frame *chunk; + int chunklen; + int r; + + if (datalen > PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN) + datalen = PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN; + + chunk = (struct pn544_i2c_fw_secure_frame *) buf; + + chunk->cmd = PN544_FW_CMD_SECURE_CHUNK_WRITE; + + put_unaligned_be16(datalen, &chunk->be_datalen); + + memcpy(chunk->data, data, datalen); + + chunklen = sizeof(chunk->cmd) + sizeof(chunk->be_datalen) + datalen; + + r = i2c_master_send(phy->i2c_dev, buf, chunklen); + + if (r == chunklen) + return datalen; + else if (r < 0) + return r; + else + return -EIO; + +} + +static int pn544_hci_i2c_fw_secure_write_frame(struct pn544_i2c_phy *phy) +{ + struct pn544_i2c_fw_secure_frame *framep; + int r; + + framep = (struct pn544_i2c_fw_secure_frame *) phy->fw_blob_data; + if (phy->fw_written == 0) + phy->fw_blob_size = get_unaligned_be16(&framep->be_datalen) + + PN544_FW_SECURE_FRAME_HEADER_LEN; + + /* Only secure write command can be chunked*/ + if (phy->fw_blob_size > PN544_FW_I2C_MAX_PAYLOAD && + framep->cmd != PN544_FW_CMD_SECURE_WRITE) + return -EINVAL; + + /* The firmware also have other commands, we just send them directly */ + if (phy->fw_blob_size < PN544_FW_I2C_MAX_PAYLOAD) { + r = i2c_master_send(phy->i2c_dev, + (const char *) phy->fw_blob_data, phy->fw_blob_size); + + if (r == phy->fw_blob_size) + goto exit; + else if (r < 0) + return r; + else + return -EIO; + } + + r = pn544_hci_i2c_fw_secure_write_frame_cmd(phy, + phy->fw_blob_data + phy->fw_written, + phy->fw_blob_size - phy->fw_written); + if (r < 0) + return r; + +exit: + phy->fw_written += r; + phy->fw_work_state = FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER; + + /* SW reset command will not trig any response from PN544 */ + if (framep->cmd == PN544_FW_CMD_RESET) { + pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE); + phy->fw_cmd_result = 0; + schedule_work(&phy->fw_work); + } + + return 0; +} + +static void pn544_hci_i2c_fw_work(struct work_struct *work) +{ + struct pn544_i2c_phy *phy = container_of(work, struct pn544_i2c_phy, + fw_work); + int r; + struct pn544_i2c_fw_blob *blob; + struct pn544_i2c_fw_secure_blob *secure_blob; + + switch (phy->fw_work_state) { + case FW_WORK_STATE_START: + pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE); + + r = request_firmware(&phy->fw, phy->firmware_name, + &phy->i2c_dev->dev); + if (r < 0) + goto exit_state_start; + + phy->fw_written = 0; + + switch (phy->hw_variant) { + case PN544_HW_VARIANT_C2: + blob = (struct pn544_i2c_fw_blob *) phy->fw->data; + phy->fw_blob_size = get_unaligned_be32(&blob->be_size); + phy->fw_blob_dest_addr = get_unaligned_be32( + &blob->be_destaddr); + phy->fw_blob_data = blob->data; + + r = pn544_hci_i2c_fw_write_chunk(phy); + break; + case PN544_HW_VARIANT_C3: + secure_blob = (struct pn544_i2c_fw_secure_blob *) + phy->fw->data; + phy->fw_blob_data = secure_blob->data; + phy->fw_size = phy->fw->size; + r = pn544_hci_i2c_fw_secure_write_frame(phy); + break; + default: + r = -ENOTSUPP; + break; + } + +exit_state_start: + if (r < 0) + pn544_hci_i2c_fw_work_complete(phy, r); + break; + + case FW_WORK_STATE_WAIT_WRITE_ANSWER: + r = phy->fw_cmd_result; + if (r < 0) + goto exit_state_wait_write_answer; + + if (phy->fw_written == phy->fw_blob_size) { + r = pn544_hci_i2c_fw_check_cmd(phy->i2c_dev, + phy->fw_blob_dest_addr, + phy->fw_blob_data, + phy->fw_blob_size); + if (r < 0) + goto exit_state_wait_write_answer; + phy->fw_work_state = FW_WORK_STATE_WAIT_CHECK_ANSWER; + break; + } + + r = pn544_hci_i2c_fw_write_chunk(phy); + +exit_state_wait_write_answer: + if (r < 0) + pn544_hci_i2c_fw_work_complete(phy, r); + break; + + case FW_WORK_STATE_WAIT_CHECK_ANSWER: + r = phy->fw_cmd_result; + if (r < 0) + goto exit_state_wait_check_answer; + + blob = (struct pn544_i2c_fw_blob *) (phy->fw_blob_data + + phy->fw_blob_size); + phy->fw_blob_size = get_unaligned_be32(&blob->be_size); + if (phy->fw_blob_size != 0) { + phy->fw_blob_dest_addr = + get_unaligned_be32(&blob->be_destaddr); + phy->fw_blob_data = blob->data; + + phy->fw_written = 0; + r = pn544_hci_i2c_fw_write_chunk(phy); + } + +exit_state_wait_check_answer: + if (r < 0 || phy->fw_blob_size == 0) + pn544_hci_i2c_fw_work_complete(phy, r); + break; + + case FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER: + r = phy->fw_cmd_result; + if (r < 0) + goto exit_state_wait_secure_write_answer; + + if (r == PN544_FW_CMD_RESULT_CHUNK_OK) { + r = pn544_hci_i2c_fw_secure_write_frame(phy); + goto exit_state_wait_secure_write_answer; + } + + if (phy->fw_written == phy->fw_blob_size) { + secure_blob = (struct pn544_i2c_fw_secure_blob *) + (phy->fw_blob_data + phy->fw_blob_size); + phy->fw_size -= phy->fw_blob_size + + PN544_FW_SECURE_BLOB_HEADER_LEN; + if (phy->fw_size >= PN544_FW_SECURE_BLOB_HEADER_LEN + + PN544_FW_SECURE_FRAME_HEADER_LEN) { + phy->fw_blob_data = secure_blob->data; + + phy->fw_written = 0; + r = pn544_hci_i2c_fw_secure_write_frame(phy); + } + } + +exit_state_wait_secure_write_answer: + if (r < 0 || phy->fw_size == 0) + pn544_hci_i2c_fw_work_complete(phy, r); + break; + + default: + break; + } +} + +static int pn544_hci_i2c_acpi_request_resources(struct i2c_client *client) +{ + struct pn544_i2c_phy *phy = i2c_get_clientdata(client); + struct gpio_desc *gpiod_en, *gpiod_fw; + struct device *dev = &client->dev; + + /* Get EN GPIO from ACPI */ + gpiod_en = devm_gpiod_get_index(dev, PN544_GPIO_NAME_EN, 1, + GPIOD_OUT_LOW); + if (IS_ERR(gpiod_en)) { + nfc_err(dev, "Unable to get EN GPIO\n"); + return -ENODEV; + } + + phy->gpio_en = desc_to_gpio(gpiod_en); + + /* Get FW GPIO from ACPI */ + gpiod_fw = devm_gpiod_get_index(dev, PN544_GPIO_NAME_FW, 2, + GPIOD_OUT_LOW); + if (IS_ERR(gpiod_fw)) { + nfc_err(dev, "Unable to get FW GPIO\n"); + return -ENODEV; + } + + phy->gpio_fw = desc_to_gpio(gpiod_fw); + + return 0; +} + +static int pn544_hci_i2c_of_request_resources(struct i2c_client *client) +{ + struct pn544_i2c_phy *phy = i2c_get_clientdata(client); + struct device_node *pp; + int ret; + + pp = client->dev.of_node; + if (!pp) { + ret = -ENODEV; + goto err_dt; + } + + /* Obtention of EN GPIO from device tree */ + ret = of_get_named_gpio(pp, "enable-gpios", 0); + if (ret < 0) { + if (ret != -EPROBE_DEFER) + nfc_err(&client->dev, + "Failed to get EN gpio, error: %d\n", ret); + goto err_dt; + } + phy->gpio_en = ret; + + /* Configuration of EN GPIO */ + ret = gpio_request(phy->gpio_en, PN544_GPIO_NAME_EN); + if (ret) { + nfc_err(&client->dev, "Fail EN pin\n"); + goto err_dt; + } + ret = gpio_direction_output(phy->gpio_en, 0); + if (ret) { + nfc_err(&client->dev, "Fail EN pin direction\n"); + goto err_gpio_en; + } + + /* Obtention of FW GPIO from device tree */ + ret = of_get_named_gpio(pp, "firmware-gpios", 0); + if (ret < 0) { + if (ret != -EPROBE_DEFER) + nfc_err(&client->dev, + "Failed to get FW gpio, error: %d\n", ret); + goto err_gpio_en; + } + phy->gpio_fw = ret; + + /* Configuration of FW GPIO */ + ret = gpio_request(phy->gpio_fw, PN544_GPIO_NAME_FW); + if (ret) { + nfc_err(&client->dev, "Fail FW pin\n"); + goto err_gpio_en; + } + ret = gpio_direction_output(phy->gpio_fw, 0); + if (ret) { + nfc_err(&client->dev, "Fail FW pin direction\n"); + goto err_gpio_fw; + } + + return 0; + +err_gpio_fw: + gpio_free(phy->gpio_fw); +err_gpio_en: + gpio_free(phy->gpio_en); +err_dt: + return ret; +} + +static int pn544_hci_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pn544_i2c_phy *phy; + struct pn544_nfc_platform_data *pdata; + int r = 0; + + dev_dbg(&client->dev, "%s\n", __func__); + dev_dbg(&client->dev, "IRQ: %d\n", client->irq); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + nfc_err(&client->dev, "Need I2C_FUNC_I2C\n"); + return -ENODEV; + } + + phy = devm_kzalloc(&client->dev, sizeof(struct pn544_i2c_phy), + GFP_KERNEL); + if (!phy) + return -ENOMEM; + + INIT_WORK(&phy->fw_work, pn544_hci_i2c_fw_work); + phy->fw_work_state = FW_WORK_STATE_IDLE; + + phy->i2c_dev = client; + i2c_set_clientdata(client, phy); + + pdata = client->dev.platform_data; + + /* No platform data, using device tree. */ + if (!pdata && client->dev.of_node) { + r = pn544_hci_i2c_of_request_resources(client); + if (r) { + nfc_err(&client->dev, "No DT data\n"); + return r; + } + /* Using platform data. */ + } else if (pdata) { + + if (pdata->request_resources == NULL) { + nfc_err(&client->dev, "request_resources() missing\n"); + return -EINVAL; + } + + r = pdata->request_resources(client); + if (r) { + nfc_err(&client->dev, + "Cannot get platform resources\n"); + return r; + } + + phy->gpio_en = pdata->get_gpio(NFC_GPIO_ENABLE); + phy->gpio_fw = pdata->get_gpio(NFC_GPIO_FW_RESET); + /* Using ACPI */ + } else if (ACPI_HANDLE(&client->dev)) { + r = pn544_hci_i2c_acpi_request_resources(client); + if (r) { + nfc_err(&client->dev, + "Cannot get ACPI data\n"); + return r; + } + } else { + nfc_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + + pn544_hci_i2c_platform_init(phy); + + r = request_threaded_irq(client->irq, NULL, pn544_hci_i2c_irq_thread_fn, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + PN544_HCI_I2C_DRIVER_NAME, phy); + if (r < 0) { + nfc_err(&client->dev, "Unable to register IRQ handler\n"); + goto err_rti; + } + + r = pn544_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME, + PN544_I2C_FRAME_HEADROOM, PN544_I2C_FRAME_TAILROOM, + PN544_HCI_I2C_LLC_MAX_PAYLOAD, + pn544_hci_i2c_fw_download, &phy->hdev); + if (r < 0) + goto err_hci; + + return 0; + +err_hci: + free_irq(client->irq, phy); + +err_rti: + if (!pdata) { + gpio_free(phy->gpio_en); + gpio_free(phy->gpio_fw); + } else if (pdata->free_resources) { + pdata->free_resources(); + } + + return r; +} + +static int pn544_hci_i2c_remove(struct i2c_client *client) +{ + struct pn544_i2c_phy *phy = i2c_get_clientdata(client); + struct pn544_nfc_platform_data *pdata = client->dev.platform_data; + + dev_dbg(&client->dev, "%s\n", __func__); + + cancel_work_sync(&phy->fw_work); + if (phy->fw_work_state != FW_WORK_STATE_IDLE) + pn544_hci_i2c_fw_work_complete(phy, -ENODEV); + + pn544_hci_remove(phy->hdev); + + if (phy->powered) + pn544_hci_i2c_disable(phy); + + free_irq(client->irq, phy); + + /* No platform data, GPIOs have been requested by this driver */ + if (!pdata) { + gpio_free(phy->gpio_en); + gpio_free(phy->gpio_fw); + /* Using platform data */ + } else if (pdata->free_resources) { + pdata->free_resources(); + } + + return 0; +} + +static const struct of_device_id of_pn544_i2c_match[] = { + { .compatible = "nxp,pn544-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_pn544_i2c_match); + +static struct i2c_driver pn544_hci_i2c_driver = { + .driver = { + .name = PN544_HCI_I2C_DRIVER_NAME, + .of_match_table = of_match_ptr(of_pn544_i2c_match), + .acpi_match_table = ACPI_PTR(pn544_hci_i2c_acpi_match), + }, + .probe = pn544_hci_i2c_probe, + .id_table = pn544_hci_i2c_id_table, + .remove = pn544_hci_i2c_remove, +}; + +module_i2c_driver(pn544_hci_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/pn544/mei.c b/drivers/nfc/pn544/mei.c new file mode 100644 index 0000000..e4e0350 --- /dev/null +++ b/drivers/nfc/pn544/mei.c @@ -0,0 +1,94 @@ +/* + * HCI based Driver for NXP pn544 NFC Chip + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/nfc.h> +#include <net/nfc/hci.h> +#include <net/nfc/llc.h> + +#include "../mei_phy.h" +#include "pn544.h" + +#define PN544_DRIVER_NAME "pn544" + +static int pn544_mei_probe(struct mei_cl_device *cldev, + const struct mei_cl_device_id *id) +{ + struct nfc_mei_phy *phy; + int r; + + pr_info("Probing NFC pn544\n"); + + phy = nfc_mei_phy_alloc(cldev); + if (!phy) { + pr_err("Cannot allocate memory for pn544 mei phy.\n"); + return -ENOMEM; + } + + r = pn544_hci_probe(phy, &mei_phy_ops, LLC_NOP_NAME, + MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, + NULL, &phy->hdev); + if (r < 0) { + nfc_mei_phy_free(phy); + + return r; + } + + return 0; +} + +static int pn544_mei_remove(struct mei_cl_device *cldev) +{ + struct nfc_mei_phy *phy = mei_cldev_get_drvdata(cldev); + + pr_info("Removing pn544\n"); + + pn544_hci_remove(phy->hdev); + + nfc_mei_phy_free(phy); + + return 0; +} + +static struct mei_cl_device_id pn544_mei_tbl[] = { +#if LINUX_VERSION_IS_GEQ(4,4,0) + { PN544_DRIVER_NAME, MEI_NFC_UUID, MEI_CL_VERSION_ANY}, +#elif LINUX_VERSION_IS_GEQ(4,2,0) + { PN544_DRIVER_NAME, MEI_NFC_UUID}, +#else + { PN544_DRIVER_NAME}, +#endif + + /* required last entry */ + { } +}; +MODULE_DEVICE_TABLE(mei, pn544_mei_tbl); + +static struct mei_cl_driver pn544_driver = { + .id_table = pn544_mei_tbl, + .name = PN544_DRIVER_NAME, + + .probe = pn544_mei_probe, + .remove = pn544_mei_remove, +}; + +module_mei_cl_driver(pn544_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c new file mode 100644 index 0000000..12e819d --- /dev/null +++ b/drivers/nfc/pn544/pn544.c @@ -0,0 +1,995 @@ +/* + * HCI based Driver for NXP PN544 NFC Chip + * + * Copyright (C) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/module.h> + +#include <linux/nfc.h> +#include <net/nfc/hci.h> +#include <net/nfc/llc.h> + +#include "pn544.h" + +/* Timing restrictions (ms) */ +#define PN544_HCI_RESETVEN_TIME 30 + +enum pn544_state { + PN544_ST_COLD, + PN544_ST_FW_READY, + PN544_ST_READY, +}; + +#define FULL_VERSION_LEN 11 + +/* Proprietary commands */ +#define PN544_WRITE 0x3f +#define PN544_TEST_SWP 0x21 + +/* Proprietary gates, events, commands and registers */ + +/* NFC_HCI_RF_READER_A_GATE additional registers and commands */ +#define PN544_RF_READER_A_AUTO_ACTIVATION 0x10 +#define PN544_RF_READER_A_CMD_CONTINUE_ACTIVATION 0x12 +#define PN544_MIFARE_CMD 0x21 + +/* Commands that apply to all RF readers */ +#define PN544_RF_READER_CMD_PRESENCE_CHECK 0x30 +#define PN544_RF_READER_CMD_ACTIVATE_NEXT 0x32 + +/* NFC_HCI_ID_MGMT_GATE additional registers */ +#define PN544_ID_MGMT_FULL_VERSION_SW 0x10 + +#define PN544_RF_READER_ISO15693_GATE 0x12 + +#define PN544_RF_READER_F_GATE 0x14 +#define PN544_FELICA_ID 0x04 +#define PN544_FELICA_RAW 0x20 + +#define PN544_RF_READER_JEWEL_GATE 0x15 +#define PN544_JEWEL_RAW_CMD 0x23 + +#define PN544_RF_READER_NFCIP1_INITIATOR_GATE 0x30 +#define PN544_RF_READER_NFCIP1_TARGET_GATE 0x31 + +#define PN544_SYS_MGMT_GATE 0x90 +#define PN544_SYS_MGMT_INFO_NOTIFICATION 0x02 + +#define PN544_POLLING_LOOP_MGMT_GATE 0x94 +#define PN544_DEP_MODE 0x01 +#define PN544_DEP_ATR_REQ 0x02 +#define PN544_DEP_ATR_RES 0x03 +#define PN544_DEP_MERGE 0x0D +#define PN544_PL_RDPHASES 0x06 +#define PN544_PL_EMULATION 0x07 +#define PN544_PL_NFCT_DEACTIVATED 0x09 + +#define PN544_SWP_MGMT_GATE 0xA0 +#define PN544_SWP_DEFAULT_MODE 0x01 + +#define PN544_NFC_WI_MGMT_GATE 0xA1 +#define PN544_NFC_ESE_DEFAULT_MODE 0x01 + +#define PN544_HCI_EVT_SND_DATA 0x01 +#define PN544_HCI_EVT_ACTIVATED 0x02 +#define PN544_HCI_EVT_DEACTIVATED 0x03 +#define PN544_HCI_EVT_RCV_DATA 0x04 +#define PN544_HCI_EVT_CONTINUE_MI 0x05 +#define PN544_HCI_EVT_SWITCH_MODE 0x03 + +#define PN544_HCI_CMD_ATTREQUEST 0x12 +#define PN544_HCI_CMD_CONTINUE_ACTIVATION 0x13 + +static struct nfc_hci_gate pn544_gates[] = { + {NFC_HCI_ADMIN_GATE, NFC_HCI_INVALID_PIPE}, + {NFC_HCI_LOOPBACK_GATE, NFC_HCI_INVALID_PIPE}, + {NFC_HCI_ID_MGMT_GATE, NFC_HCI_INVALID_PIPE}, + {NFC_HCI_LINK_MGMT_GATE, NFC_HCI_INVALID_PIPE}, + {NFC_HCI_RF_READER_B_GATE, NFC_HCI_INVALID_PIPE}, + {NFC_HCI_RF_READER_A_GATE, NFC_HCI_INVALID_PIPE}, + {PN544_SYS_MGMT_GATE, NFC_HCI_INVALID_PIPE}, + {PN544_SWP_MGMT_GATE, NFC_HCI_INVALID_PIPE}, + {PN544_POLLING_LOOP_MGMT_GATE, NFC_HCI_INVALID_PIPE}, + {PN544_NFC_WI_MGMT_GATE, NFC_HCI_INVALID_PIPE}, + {PN544_RF_READER_F_GATE, NFC_HCI_INVALID_PIPE}, + {PN544_RF_READER_JEWEL_GATE, NFC_HCI_INVALID_PIPE}, + {PN544_RF_READER_ISO15693_GATE, NFC_HCI_INVALID_PIPE}, + {PN544_RF_READER_NFCIP1_INITIATOR_GATE, NFC_HCI_INVALID_PIPE}, + {PN544_RF_READER_NFCIP1_TARGET_GATE, NFC_HCI_INVALID_PIPE} +}; + +/* Largest headroom needed for outgoing custom commands */ +#define PN544_CMDS_HEADROOM 2 + +struct pn544_hci_info { + struct nfc_phy_ops *phy_ops; + void *phy_id; + + struct nfc_hci_dev *hdev; + + enum pn544_state state; + + struct mutex info_lock; + + int async_cb_type; + data_exchange_cb_t async_cb; + void *async_cb_context; + + fw_download_t fw_download; +}; + +static int pn544_hci_open(struct nfc_hci_dev *hdev) +{ + struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev); + int r = 0; + + mutex_lock(&info->info_lock); + + if (info->state != PN544_ST_COLD) { + r = -EBUSY; + goto out; + } + + r = info->phy_ops->enable(info->phy_id); + + if (r == 0) + info->state = PN544_ST_READY; + +out: + mutex_unlock(&info->info_lock); + return r; +} + +static void pn544_hci_close(struct nfc_hci_dev *hdev) +{ + struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev); + + mutex_lock(&info->info_lock); + + if (info->state == PN544_ST_COLD) + goto out; + + info->phy_ops->disable(info->phy_id); + + info->state = PN544_ST_COLD; + +out: + mutex_unlock(&info->info_lock); +} + +static int pn544_hci_ready(struct nfc_hci_dev *hdev) +{ + struct sk_buff *skb; + static struct hw_config { + u8 adr[2]; + u8 value; + } hw_config[] = { + {{0x9f, 0x9a}, 0x00}, + + {{0x98, 0x10}, 0xbc}, + + {{0x9e, 0x71}, 0x00}, + + {{0x98, 0x09}, 0x00}, + + {{0x9e, 0xb4}, 0x00}, + + {{0x9c, 0x01}, 0x08}, + + {{0x9e, 0xaa}, 0x01}, + + {{0x9b, 0xd1}, 0x17}, + {{0x9b, 0xd2}, 0x58}, + {{0x9b, 0xd3}, 0x10}, + {{0x9b, 0xd4}, 0x47}, + {{0x9b, 0xd5}, 0x0c}, + {{0x9b, 0xd6}, 0x37}, + {{0x9b, 0xdd}, 0x33}, + + {{0x9b, 0x84}, 0x00}, + {{0x99, 0x81}, 0x79}, + {{0x99, 0x31}, 0x79}, + + {{0x98, 0x00}, 0x3f}, + + {{0x9f, 0x09}, 0x02}, + + {{0x9f, 0x0a}, 0x05}, + + {{0x9e, 0xd1}, 0xa1}, + {{0x99, 0x23}, 0x01}, + + {{0x9e, 0x74}, 0x00}, + {{0x9e, 0x90}, 0x00}, + {{0x9f, 0x28}, 0x10}, + + {{0x9f, 0x35}, 0x04}, + + {{0x9f, 0x36}, 0x11}, + + {{0x9c, 0x31}, 0x00}, + + {{0x9c, 0x32}, 0x00}, + + {{0x9c, 0x19}, 0x0a}, + + {{0x9c, 0x1a}, 0x0a}, + + {{0x9c, 0x0c}, 0x00}, + + {{0x9c, 0x0d}, 0x00}, + + {{0x9c, 0x12}, 0x00}, + + {{0x9c, 0x13}, 0x00}, + + {{0x98, 0xa2}, 0x09}, + + {{0x98, 0x93}, 0x00}, + + {{0x98, 0x7d}, 0x08}, + {{0x98, 0x7e}, 0x00}, + {{0x9f, 0xc8}, 0x00}, + }; + struct hw_config *p = hw_config; + int count = ARRAY_SIZE(hw_config); + struct sk_buff *res_skb; + u8 param[4]; + int r; + + param[0] = 0; + while (count--) { + param[1] = p->adr[0]; + param[2] = p->adr[1]; + param[3] = p->value; + + r = nfc_hci_send_cmd(hdev, PN544_SYS_MGMT_GATE, PN544_WRITE, + param, 4, &res_skb); + if (r < 0) + return r; + + if (res_skb->len != 1) { + kfree_skb(res_skb); + return -EPROTO; + } + + if (res_skb->data[0] != p->value) { + kfree_skb(res_skb); + return -EIO; + } + + kfree_skb(res_skb); + + p++; + } + + param[0] = NFC_HCI_UICC_HOST_ID; + r = nfc_hci_set_param(hdev, NFC_HCI_ADMIN_GATE, + NFC_HCI_ADMIN_WHITELIST, param, 1); + if (r < 0) + return r; + + param[0] = 0x3d; + r = nfc_hci_set_param(hdev, PN544_SYS_MGMT_GATE, + PN544_SYS_MGMT_INFO_NOTIFICATION, param, 1); + if (r < 0) + return r; + + param[0] = 0x0; + r = nfc_hci_set_param(hdev, NFC_HCI_RF_READER_A_GATE, + PN544_RF_READER_A_AUTO_ACTIVATION, param, 1); + if (r < 0) + return r; + + r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE, + NFC_HCI_EVT_END_OPERATION, NULL, 0); + if (r < 0) + return r; + + param[0] = 0x1; + r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE, + PN544_PL_NFCT_DEACTIVATED, param, 1); + if (r < 0) + return r; + + param[0] = 0x0; + r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE, + PN544_PL_RDPHASES, param, 1); + if (r < 0) + return r; + + r = nfc_hci_get_param(hdev, NFC_HCI_ID_MGMT_GATE, + PN544_ID_MGMT_FULL_VERSION_SW, &skb); + if (r < 0) + return r; + + if (skb->len != FULL_VERSION_LEN) { + kfree_skb(skb); + return -EINVAL; + } + + print_hex_dump(KERN_DEBUG, "FULL VERSION SOFTWARE INFO: ", + DUMP_PREFIX_NONE, 16, 1, + skb->data, FULL_VERSION_LEN, false); + + kfree_skb(skb); + + return 0; +} + +static int pn544_hci_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev); + + return info->phy_ops->write(info->phy_id, skb); +} + +static int pn544_hci_start_poll(struct nfc_hci_dev *hdev, + u32 im_protocols, u32 tm_protocols) +{ + u8 phases = 0; + int r; + u8 duration[2]; + u8 activated; + u8 i_mode = 0x3f; /* Enable all supported modes */ + u8 t_mode = 0x0f; + u8 t_merge = 0x01; /* Enable merge by default */ + + pr_info(DRIVER_DESC ": %s protocols 0x%x 0x%x\n", + __func__, im_protocols, tm_protocols); + + r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE, + NFC_HCI_EVT_END_OPERATION, NULL, 0); + if (r < 0) + return r; + + duration[0] = 0x18; + duration[1] = 0x6a; + r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE, + PN544_PL_EMULATION, duration, 2); + if (r < 0) + return r; + + activated = 0; + r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE, + PN544_PL_NFCT_DEACTIVATED, &activated, 1); + if (r < 0) + return r; + + if (im_protocols & (NFC_PROTO_ISO14443_MASK | NFC_PROTO_MIFARE_MASK | + NFC_PROTO_JEWEL_MASK)) + phases |= 1; /* Type A */ + if (im_protocols & NFC_PROTO_FELICA_MASK) { + phases |= (1 << 2); /* Type F 212 */ + phases |= (1 << 3); /* Type F 424 */ + } + + phases |= (1 << 5); /* NFC active */ + + r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE, + PN544_PL_RDPHASES, &phases, 1); + if (r < 0) + return r; + + if ((im_protocols | tm_protocols) & NFC_PROTO_NFC_DEP_MASK) { + hdev->gb = nfc_get_local_general_bytes(hdev->ndev, + &hdev->gb_len); + pr_debug("generate local bytes %p\n", hdev->gb); + if (hdev->gb == NULL || hdev->gb_len == 0) { + im_protocols &= ~NFC_PROTO_NFC_DEP_MASK; + tm_protocols &= ~NFC_PROTO_NFC_DEP_MASK; + } + } + + if (im_protocols & NFC_PROTO_NFC_DEP_MASK) { + r = nfc_hci_send_event(hdev, + PN544_RF_READER_NFCIP1_INITIATOR_GATE, + NFC_HCI_EVT_END_OPERATION, NULL, 0); + if (r < 0) + return r; + + r = nfc_hci_set_param(hdev, + PN544_RF_READER_NFCIP1_INITIATOR_GATE, + PN544_DEP_MODE, &i_mode, 1); + if (r < 0) + return r; + + r = nfc_hci_set_param(hdev, + PN544_RF_READER_NFCIP1_INITIATOR_GATE, + PN544_DEP_ATR_REQ, hdev->gb, hdev->gb_len); + if (r < 0) + return r; + + r = nfc_hci_send_event(hdev, + PN544_RF_READER_NFCIP1_INITIATOR_GATE, + NFC_HCI_EVT_READER_REQUESTED, NULL, 0); + if (r < 0) + nfc_hci_send_event(hdev, + PN544_RF_READER_NFCIP1_INITIATOR_GATE, + NFC_HCI_EVT_END_OPERATION, NULL, 0); + } + + if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) { + r = nfc_hci_set_param(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE, + PN544_DEP_MODE, &t_mode, 1); + if (r < 0) + return r; + + r = nfc_hci_set_param(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE, + PN544_DEP_ATR_RES, hdev->gb, hdev->gb_len); + if (r < 0) + return r; + + r = nfc_hci_set_param(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE, + PN544_DEP_MERGE, &t_merge, 1); + if (r < 0) + return r; + } + + r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE, + NFC_HCI_EVT_READER_REQUESTED, NULL, 0); + if (r < 0) + nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE, + NFC_HCI_EVT_END_OPERATION, NULL, 0); + + return r; +} + +static int pn544_hci_dep_link_up(struct nfc_hci_dev *hdev, + struct nfc_target *target, u8 comm_mode, + u8 *gb, size_t gb_len) +{ + struct sk_buff *rgb_skb = NULL; + int r; + + r = nfc_hci_get_param(hdev, target->hci_reader_gate, + PN544_DEP_ATR_RES, &rgb_skb); + if (r < 0) + return r; + + if (rgb_skb->len == 0 || rgb_skb->len > NFC_GB_MAXSIZE) { + r = -EPROTO; + goto exit; + } + print_hex_dump(KERN_DEBUG, "remote gb: ", DUMP_PREFIX_OFFSET, + 16, 1, rgb_skb->data, rgb_skb->len, true); + + r = nfc_set_remote_general_bytes(hdev->ndev, rgb_skb->data, + rgb_skb->len); + + if (r == 0) + r = nfc_dep_link_is_up(hdev->ndev, target->idx, comm_mode, + NFC_RF_INITIATOR); +exit: + kfree_skb(rgb_skb); + return r; +} + +static int pn544_hci_dep_link_down(struct nfc_hci_dev *hdev) +{ + + return nfc_hci_send_event(hdev, PN544_RF_READER_NFCIP1_INITIATOR_GATE, + NFC_HCI_EVT_END_OPERATION, NULL, 0); +} + +static int pn544_hci_target_from_gate(struct nfc_hci_dev *hdev, u8 gate, + struct nfc_target *target) +{ + switch (gate) { + case PN544_RF_READER_F_GATE: + target->supported_protocols = NFC_PROTO_FELICA_MASK; + break; + case PN544_RF_READER_JEWEL_GATE: + target->supported_protocols = NFC_PROTO_JEWEL_MASK; + target->sens_res = 0x0c00; + break; + case PN544_RF_READER_NFCIP1_INITIATOR_GATE: + target->supported_protocols = NFC_PROTO_NFC_DEP_MASK; + break; + default: + return -EPROTO; + } + + return 0; +} + +static int pn544_hci_complete_target_discovered(struct nfc_hci_dev *hdev, + u8 gate, + struct nfc_target *target) +{ + struct sk_buff *uid_skb; + int r = 0; + + if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE) + return r; + + if (target->supported_protocols & NFC_PROTO_NFC_DEP_MASK) { + r = nfc_hci_send_cmd(hdev, + PN544_RF_READER_NFCIP1_INITIATOR_GATE, + PN544_HCI_CMD_CONTINUE_ACTIVATION, NULL, 0, NULL); + if (r < 0) + return r; + + target->hci_reader_gate = PN544_RF_READER_NFCIP1_INITIATOR_GATE; + } else if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) { + if (target->nfcid1_len != 4 && target->nfcid1_len != 7 && + target->nfcid1_len != 10) + return -EPROTO; + + r = nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE, + PN544_RF_READER_CMD_ACTIVATE_NEXT, + target->nfcid1, target->nfcid1_len, NULL); + } else if (target->supported_protocols & NFC_PROTO_FELICA_MASK) { + r = nfc_hci_get_param(hdev, PN544_RF_READER_F_GATE, + PN544_FELICA_ID, &uid_skb); + if (r < 0) + return r; + + if (uid_skb->len != 8) { + kfree_skb(uid_skb); + return -EPROTO; + } + + /* Type F NFC-DEP IDm has prefix 0x01FE */ + if ((uid_skb->data[0] == 0x01) && (uid_skb->data[1] == 0xfe)) { + kfree_skb(uid_skb); + r = nfc_hci_send_cmd(hdev, + PN544_RF_READER_NFCIP1_INITIATOR_GATE, + PN544_HCI_CMD_CONTINUE_ACTIVATION, + NULL, 0, NULL); + if (r < 0) + return r; + + target->supported_protocols = NFC_PROTO_NFC_DEP_MASK; + target->hci_reader_gate = + PN544_RF_READER_NFCIP1_INITIATOR_GATE; + } else { + r = nfc_hci_send_cmd(hdev, PN544_RF_READER_F_GATE, + PN544_RF_READER_CMD_ACTIVATE_NEXT, + uid_skb->data, uid_skb->len, NULL); + kfree_skb(uid_skb); + } + } else if (target->supported_protocols & NFC_PROTO_ISO14443_MASK) { + /* + * TODO: maybe other ISO 14443 require some kind of continue + * activation, but for now we've seen only this one below. + */ + if (target->sens_res == 0x4403) /* Type 4 Mifare DESFire */ + r = nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE, + PN544_RF_READER_A_CMD_CONTINUE_ACTIVATION, + NULL, 0, NULL); + } + + return r; +} + +#define PN544_CB_TYPE_READER_F 1 + +static void pn544_hci_data_exchange_cb(void *context, struct sk_buff *skb, + int err) +{ + struct pn544_hci_info *info = context; + + switch (info->async_cb_type) { + case PN544_CB_TYPE_READER_F: + if (err == 0) + skb_pull(skb, 1); + info->async_cb(info->async_cb_context, skb, err); + break; + default: + if (err == 0) + kfree_skb(skb); + break; + } +} + +#define MIFARE_CMD_AUTH_KEY_A 0x60 +#define MIFARE_CMD_AUTH_KEY_B 0x61 +#define MIFARE_CMD_HEADER 2 +#define MIFARE_UID_LEN 4 +#define MIFARE_KEY_LEN 6 +#define MIFARE_CMD_LEN 12 +/* + * Returns: + * <= 0: driver handled the data exchange + * 1: driver doesn't especially handle, please do standard processing + */ +static int pn544_hci_im_transceive(struct nfc_hci_dev *hdev, + struct nfc_target *target, + struct sk_buff *skb, data_exchange_cb_t cb, + void *cb_context) +{ + struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev); + + pr_info(DRIVER_DESC ": %s for gate=%d\n", __func__, + target->hci_reader_gate); + + switch (target->hci_reader_gate) { + case NFC_HCI_RF_READER_A_GATE: + if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) { + /* + * It seems that pn544 is inverting key and UID for + * MIFARE authentication commands. + */ + if (skb->len == MIFARE_CMD_LEN && + (skb->data[0] == MIFARE_CMD_AUTH_KEY_A || + skb->data[0] == MIFARE_CMD_AUTH_KEY_B)) { + u8 uid[MIFARE_UID_LEN]; + u8 *data = skb->data + MIFARE_CMD_HEADER; + + memcpy(uid, data + MIFARE_KEY_LEN, + MIFARE_UID_LEN); + memmove(data + MIFARE_UID_LEN, data, + MIFARE_KEY_LEN); + memcpy(data, uid, MIFARE_UID_LEN); + } + + return nfc_hci_send_cmd_async(hdev, + target->hci_reader_gate, + PN544_MIFARE_CMD, + skb->data, skb->len, + cb, cb_context); + } else + return 1; + case PN544_RF_READER_F_GATE: + *skb_push(skb, 1) = 0; + *skb_push(skb, 1) = 0; + + info->async_cb_type = PN544_CB_TYPE_READER_F; + info->async_cb = cb; + info->async_cb_context = cb_context; + + return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate, + PN544_FELICA_RAW, skb->data, + skb->len, + pn544_hci_data_exchange_cb, info); + case PN544_RF_READER_JEWEL_GATE: + return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate, + PN544_JEWEL_RAW_CMD, skb->data, + skb->len, cb, cb_context); + case PN544_RF_READER_NFCIP1_INITIATOR_GATE: + *skb_push(skb, 1) = 0; + + return nfc_hci_send_event(hdev, target->hci_reader_gate, + PN544_HCI_EVT_SND_DATA, skb->data, + skb->len); + default: + return 1; + } +} + +static int pn544_hci_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + int r; + + /* Set default false for multiple information chaining */ + *skb_push(skb, 1) = 0; + + r = nfc_hci_send_event(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE, + PN544_HCI_EVT_SND_DATA, skb->data, skb->len); + + kfree_skb(skb); + + return r; +} + +static int pn544_hci_check_presence(struct nfc_hci_dev *hdev, + struct nfc_target *target) +{ + pr_debug("supported protocol %d\b", target->supported_protocols); + if (target->supported_protocols & (NFC_PROTO_ISO14443_MASK | + NFC_PROTO_ISO14443_B_MASK)) { + return nfc_hci_send_cmd(hdev, target->hci_reader_gate, + PN544_RF_READER_CMD_PRESENCE_CHECK, + NULL, 0, NULL); + } else if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) { + if (target->nfcid1_len != 4 && target->nfcid1_len != 7 && + target->nfcid1_len != 10) + return -EOPNOTSUPP; + + return nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE, + PN544_RF_READER_CMD_ACTIVATE_NEXT, + target->nfcid1, target->nfcid1_len, NULL); + } else if (target->supported_protocols & (NFC_PROTO_JEWEL_MASK | + NFC_PROTO_FELICA_MASK)) { + return -EOPNOTSUPP; + } else if (target->supported_protocols & NFC_PROTO_NFC_DEP_MASK) { + return nfc_hci_send_cmd(hdev, target->hci_reader_gate, + PN544_HCI_CMD_ATTREQUEST, + NULL, 0, NULL); + } + + return 0; +} + +/* + * Returns: + * <= 0: driver handled the event, skb consumed + * 1: driver does not handle the event, please do standard processing + */ +static int pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 pipe, u8 event, + struct sk_buff *skb) +{ + struct sk_buff *rgb_skb = NULL; + u8 gate = hdev->pipes[pipe].gate; + int r; + + pr_debug("hci event %d\n", event); + switch (event) { + case PN544_HCI_EVT_ACTIVATED: + if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE) { + r = nfc_hci_target_discovered(hdev, gate); + } else if (gate == PN544_RF_READER_NFCIP1_TARGET_GATE) { + r = nfc_hci_get_param(hdev, gate, PN544_DEP_ATR_REQ, + &rgb_skb); + if (r < 0) + goto exit; + + r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK, + NFC_COMM_PASSIVE, rgb_skb->data, + rgb_skb->len); + + kfree_skb(rgb_skb); + } else { + r = -EINVAL; + } + break; + case PN544_HCI_EVT_DEACTIVATED: + r = nfc_hci_send_event(hdev, gate, NFC_HCI_EVT_END_OPERATION, + NULL, 0); + break; + case PN544_HCI_EVT_RCV_DATA: + if (skb->len < 2) { + r = -EPROTO; + goto exit; + } + + if (skb->data[0] != 0) { + pr_debug("data0 %d\n", skb->data[0]); + r = -EPROTO; + goto exit; + } + + skb_pull(skb, 2); + return nfc_tm_data_received(hdev->ndev, skb); + default: + return 1; + } + +exit: + kfree_skb(skb); + + return r; +} + +static int pn544_hci_fw_download(struct nfc_hci_dev *hdev, + const char *firmware_name) +{ + struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev); + + if (info->fw_download == NULL) + return -ENOTSUPP; + + return info->fw_download(info->phy_id, firmware_name, hdev->sw_romlib); +} + +static int pn544_hci_discover_se(struct nfc_hci_dev *hdev) +{ + u32 se_idx = 0; + u8 ese_mode = 0x01; /* Default mode */ + struct sk_buff *res_skb; + int r; + + r = nfc_hci_send_cmd(hdev, PN544_SYS_MGMT_GATE, PN544_TEST_SWP, + NULL, 0, &res_skb); + + if (r == 0) { + if (res_skb->len == 2 && res_skb->data[0] == 0x00) + nfc_add_se(hdev->ndev, se_idx++, NFC_SE_UICC); + + kfree_skb(res_skb); + } + + r = nfc_hci_send_event(hdev, PN544_NFC_WI_MGMT_GATE, + PN544_HCI_EVT_SWITCH_MODE, + &ese_mode, 1); + if (r == 0) + nfc_add_se(hdev->ndev, se_idx++, NFC_SE_EMBEDDED); + + return !se_idx; +} + +#define PN544_SE_MODE_OFF 0x00 +#define PN544_SE_MODE_ON 0x01 +static int pn544_hci_enable_se(struct nfc_hci_dev *hdev, u32 se_idx) +{ + struct nfc_se *se; + u8 enable = PN544_SE_MODE_ON; + static struct uicc_gatelist { + u8 head; + u8 adr[2]; + u8 value; + } uicc_gatelist[] = { + {0x00, {0x9e, 0xd9}, 0x23}, + {0x00, {0x9e, 0xda}, 0x21}, + {0x00, {0x9e, 0xdb}, 0x22}, + {0x00, {0x9e, 0xdc}, 0x24}, + }; + struct uicc_gatelist *p = uicc_gatelist; + int count = ARRAY_SIZE(uicc_gatelist); + struct sk_buff *res_skb; + int r; + + se = nfc_find_se(hdev->ndev, se_idx); + + switch (se->type) { + case NFC_SE_UICC: + while (count--) { + r = nfc_hci_send_cmd(hdev, PN544_SYS_MGMT_GATE, + PN544_WRITE, (u8 *)p, 4, &res_skb); + if (r < 0) + return r; + + if (res_skb->len != 1) { + kfree_skb(res_skb); + return -EPROTO; + } + + if (res_skb->data[0] != p->value) { + kfree_skb(res_skb); + return -EIO; + } + + kfree_skb(res_skb); + + p++; + } + + return nfc_hci_set_param(hdev, PN544_SWP_MGMT_GATE, + PN544_SWP_DEFAULT_MODE, &enable, 1); + case NFC_SE_EMBEDDED: + return nfc_hci_set_param(hdev, PN544_NFC_WI_MGMT_GATE, + PN544_NFC_ESE_DEFAULT_MODE, &enable, 1); + + default: + return -EINVAL; + } +} + +static int pn544_hci_disable_se(struct nfc_hci_dev *hdev, u32 se_idx) +{ + struct nfc_se *se; + u8 disable = PN544_SE_MODE_OFF; + + se = nfc_find_se(hdev->ndev, se_idx); + + switch (se->type) { + case NFC_SE_UICC: + return nfc_hci_set_param(hdev, PN544_SWP_MGMT_GATE, + PN544_SWP_DEFAULT_MODE, &disable, 1); + case NFC_SE_EMBEDDED: + return nfc_hci_set_param(hdev, PN544_NFC_WI_MGMT_GATE, + PN544_NFC_ESE_DEFAULT_MODE, &disable, 1); + default: + return -EINVAL; + } +} + +static struct nfc_hci_ops pn544_hci_ops = { + .open = pn544_hci_open, + .close = pn544_hci_close, + .hci_ready = pn544_hci_ready, + .xmit = pn544_hci_xmit, + .start_poll = pn544_hci_start_poll, + .dep_link_up = pn544_hci_dep_link_up, + .dep_link_down = pn544_hci_dep_link_down, + .target_from_gate = pn544_hci_target_from_gate, + .complete_target_discovered = pn544_hci_complete_target_discovered, + .im_transceive = pn544_hci_im_transceive, + .tm_send = pn544_hci_tm_send, + .check_presence = pn544_hci_check_presence, + .event_received = pn544_hci_event_received, + .fw_download = pn544_hci_fw_download, + .discover_se = pn544_hci_discover_se, + .enable_se = pn544_hci_enable_se, + .disable_se = pn544_hci_disable_se, +}; + +int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, + int phy_headroom, int phy_tailroom, int phy_payload, + fw_download_t fw_download, struct nfc_hci_dev **hdev) +{ + struct pn544_hci_info *info; + u32 protocols; + struct nfc_hci_init_data init_data; + int r; + + info = kzalloc(sizeof(struct pn544_hci_info), GFP_KERNEL); + if (!info) { + r = -ENOMEM; + goto err_info_alloc; + } + + info->phy_ops = phy_ops; + info->phy_id = phy_id; + info->fw_download = fw_download; + info->state = PN544_ST_COLD; + mutex_init(&info->info_lock); + + init_data.gate_count = ARRAY_SIZE(pn544_gates); + + memcpy(init_data.gates, pn544_gates, sizeof(pn544_gates)); + + /* + * TODO: Session id must include the driver name + some bus addr + * persistent info to discriminate 2 identical chips + */ + strcpy(init_data.session_id, "ID544HCI"); + + protocols = NFC_PROTO_JEWEL_MASK | + NFC_PROTO_MIFARE_MASK | + NFC_PROTO_FELICA_MASK | + NFC_PROTO_ISO14443_MASK | + NFC_PROTO_ISO14443_B_MASK | + NFC_PROTO_NFC_DEP_MASK; + + info->hdev = nfc_hci_allocate_device(&pn544_hci_ops, &init_data, 0, + protocols, llc_name, + phy_headroom + PN544_CMDS_HEADROOM, + phy_tailroom, phy_payload); + if (!info->hdev) { + pr_err("Cannot allocate nfc hdev\n"); + r = -ENOMEM; + goto err_alloc_hdev; + } + + nfc_hci_set_clientdata(info->hdev, info); + + r = nfc_hci_register_device(info->hdev); + if (r) + goto err_regdev; + + *hdev = info->hdev; + + return 0; + +err_regdev: + nfc_hci_free_device(info->hdev); + +err_alloc_hdev: + kfree(info); + +err_info_alloc: + return r; +} +EXPORT_SYMBOL(pn544_hci_probe); + +void pn544_hci_remove(struct nfc_hci_dev *hdev) +{ + struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev); + + nfc_hci_unregister_device(hdev); + nfc_hci_free_device(hdev); + kfree(info); +} +EXPORT_SYMBOL(pn544_hci_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/pn544/pn544.h b/drivers/nfc/pn544/pn544.h new file mode 100644 index 0000000..2aa9233 --- /dev/null +++ b/drivers/nfc/pn544/pn544.h @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2011 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LOCAL_PN544_H_ +#define __LOCAL_PN544_H_ + +#include <net/nfc/hci.h> + +#define DRIVER_DESC "HCI NFC driver for PN544" + +#define PN544_HCI_MODE 0 +#define PN544_FW_MODE 1 + +typedef int (*fw_download_t)(void *context, const char *firmware_name, + u8 hw_variant); + +int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, + int phy_headroom, int phy_tailroom, int phy_payload, + fw_download_t fw_download, struct nfc_hci_dev **hdev); +void pn544_hci_remove(struct nfc_hci_dev *hdev); + +#endif /* __LOCAL_PN544_H_ */ diff --git a/drivers/nfc/port100.c b/drivers/nfc/port100.c new file mode 100644 index 0000000..2b2330b --- /dev/null +++ b/drivers/nfc/port100.c @@ -0,0 +1,1649 @@ +/* + * Sony NFC Port-100 Series driver + * Copyright (c) 2013, Intel Corporation. + * + * Partly based/Inspired by Stephen Tiedemann's nfcpy + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <linux/module.h> +#include <linux/usb.h> +#include <net/nfc/digital.h> + +#define VERSION "0.1" + +#define SONY_VENDOR_ID 0x054c +#define RCS380_PRODUCT_ID 0x06c1 + +#define PORT100_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \ + NFC_PROTO_MIFARE_MASK | \ + NFC_PROTO_FELICA_MASK | \ + NFC_PROTO_NFC_DEP_MASK | \ + NFC_PROTO_ISO14443_MASK | \ + NFC_PROTO_ISO14443_B_MASK) + +#define PORT100_CAPABILITIES (NFC_DIGITAL_DRV_CAPS_IN_CRC | \ + NFC_DIGITAL_DRV_CAPS_TG_CRC) + +/* Standard port100 frame definitions */ +#define PORT100_FRAME_HEADER_LEN (sizeof(struct port100_frame) \ + + 2) /* data[0] CC, data[1] SCC */ +#define PORT100_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/ + +#define PORT100_COMM_RF_HEAD_MAX_LEN (sizeof(struct port100_tg_comm_rf_cmd)) + +/* + * Max extended frame payload len, excluding CC and SCC + * which are already in PORT100_FRAME_HEADER_LEN. + */ +#define PORT100_FRAME_MAX_PAYLOAD_LEN 1001 + +#define PORT100_FRAME_ACK_SIZE 6 /* Preamble (1), SoPC (2), ACK Code (2), + Postamble (1) */ +static u8 ack_frame[PORT100_FRAME_ACK_SIZE] = { + 0x00, 0x00, 0xff, 0x00, 0xff, 0x00 +}; + +#define PORT100_FRAME_CHECKSUM(f) (f->data[le16_to_cpu(f->datalen)]) +#define PORT100_FRAME_POSTAMBLE(f) (f->data[le16_to_cpu(f->datalen) + 1]) + +/* start of frame */ +#define PORT100_FRAME_SOF 0x00FF +#define PORT100_FRAME_EXT 0xFFFF +#define PORT100_FRAME_ACK 0x00FF + +/* Port-100 command: in or out */ +#define PORT100_FRAME_DIRECTION(f) (f->data[0]) /* CC */ +#define PORT100_FRAME_DIR_OUT 0xD6 +#define PORT100_FRAME_DIR_IN 0xD7 + +/* Port-100 sub-command */ +#define PORT100_FRAME_CMD(f) (f->data[1]) /* SCC */ + +#define PORT100_CMD_GET_FIRMWARE_VERSION 0x20 +#define PORT100_CMD_GET_COMMAND_TYPE 0x28 +#define PORT100_CMD_SET_COMMAND_TYPE 0x2A + +#define PORT100_CMD_IN_SET_RF 0x00 +#define PORT100_CMD_IN_SET_PROTOCOL 0x02 +#define PORT100_CMD_IN_COMM_RF 0x04 + +#define PORT100_CMD_TG_SET_RF 0x40 +#define PORT100_CMD_TG_SET_PROTOCOL 0x42 +#define PORT100_CMD_TG_SET_RF_OFF 0x46 +#define PORT100_CMD_TG_COMM_RF 0x48 + +#define PORT100_CMD_SWITCH_RF 0x06 + +#define PORT100_CMD_RESPONSE(cmd) (cmd + 1) + +#define PORT100_CMD_TYPE_IS_SUPPORTED(mask, cmd_type) \ + ((mask) & (0x01 << (cmd_type))) +#define PORT100_CMD_TYPE_0 0 +#define PORT100_CMD_TYPE_1 1 + +#define PORT100_CMD_STATUS_OK 0x00 +#define PORT100_CMD_STATUS_TIMEOUT 0x80 + +#define PORT100_MDAA_TGT_HAS_BEEN_ACTIVATED_MASK 0x01 +#define PORT100_MDAA_TGT_WAS_ACTIVATED_MASK 0x02 + +struct port100; + +typedef void (*port100_send_async_complete_t)(struct port100 *dev, void *arg, + struct sk_buff *resp); + +/** + * Setting sets structure for in_set_rf command + * + * @in_*_set_number: Represent the entry indexes in the port-100 RF Base Table. + * This table contains multiple RF setting sets required for RF + * communication. + * + * @in_*_comm_type: Theses fields set the communication type to be used. + */ +struct port100_in_rf_setting { + u8 in_send_set_number; + u8 in_send_comm_type; + u8 in_recv_set_number; + u8 in_recv_comm_type; +} __packed; + +#define PORT100_COMM_TYPE_IN_212F 0x01 +#define PORT100_COMM_TYPE_IN_424F 0x02 +#define PORT100_COMM_TYPE_IN_106A 0x03 +#define PORT100_COMM_TYPE_IN_106B 0x07 + +static const struct port100_in_rf_setting in_rf_settings[] = { + [NFC_DIGITAL_RF_TECH_212F] = { + .in_send_set_number = 1, + .in_send_comm_type = PORT100_COMM_TYPE_IN_212F, + .in_recv_set_number = 15, + .in_recv_comm_type = PORT100_COMM_TYPE_IN_212F, + }, + [NFC_DIGITAL_RF_TECH_424F] = { + .in_send_set_number = 1, + .in_send_comm_type = PORT100_COMM_TYPE_IN_424F, + .in_recv_set_number = 15, + .in_recv_comm_type = PORT100_COMM_TYPE_IN_424F, + }, + [NFC_DIGITAL_RF_TECH_106A] = { + .in_send_set_number = 2, + .in_send_comm_type = PORT100_COMM_TYPE_IN_106A, + .in_recv_set_number = 15, + .in_recv_comm_type = PORT100_COMM_TYPE_IN_106A, + }, + [NFC_DIGITAL_RF_TECH_106B] = { + .in_send_set_number = 3, + .in_send_comm_type = PORT100_COMM_TYPE_IN_106B, + .in_recv_set_number = 15, + .in_recv_comm_type = PORT100_COMM_TYPE_IN_106B, + }, + /* Ensures the array has NFC_DIGITAL_RF_TECH_LAST elements */ + [NFC_DIGITAL_RF_TECH_LAST] = { 0 }, +}; + +/** + * Setting sets structure for tg_set_rf command + * + * @tg_set_number: Represents the entry index in the port-100 RF Base Table. + * This table contains multiple RF setting sets required for RF + * communication. this field is used for both send and receive + * settings. + * + * @tg_comm_type: Sets the communication type to be used to send and receive + * data. + */ +struct port100_tg_rf_setting { + u8 tg_set_number; + u8 tg_comm_type; +} __packed; + +#define PORT100_COMM_TYPE_TG_106A 0x0B +#define PORT100_COMM_TYPE_TG_212F 0x0C +#define PORT100_COMM_TYPE_TG_424F 0x0D + +static const struct port100_tg_rf_setting tg_rf_settings[] = { + [NFC_DIGITAL_RF_TECH_106A] = { + .tg_set_number = 8, + .tg_comm_type = PORT100_COMM_TYPE_TG_106A, + }, + [NFC_DIGITAL_RF_TECH_212F] = { + .tg_set_number = 8, + .tg_comm_type = PORT100_COMM_TYPE_TG_212F, + }, + [NFC_DIGITAL_RF_TECH_424F] = { + .tg_set_number = 8, + .tg_comm_type = PORT100_COMM_TYPE_TG_424F, + }, + /* Ensures the array has NFC_DIGITAL_RF_TECH_LAST elements */ + [NFC_DIGITAL_RF_TECH_LAST] = { 0 }, + +}; + +#define PORT100_IN_PROT_INITIAL_GUARD_TIME 0x00 +#define PORT100_IN_PROT_ADD_CRC 0x01 +#define PORT100_IN_PROT_CHECK_CRC 0x02 +#define PORT100_IN_PROT_MULTI_CARD 0x03 +#define PORT100_IN_PROT_ADD_PARITY 0x04 +#define PORT100_IN_PROT_CHECK_PARITY 0x05 +#define PORT100_IN_PROT_BITWISE_AC_RECV_MODE 0x06 +#define PORT100_IN_PROT_VALID_BIT_NUMBER 0x07 +#define PORT100_IN_PROT_CRYPTO1 0x08 +#define PORT100_IN_PROT_ADD_SOF 0x09 +#define PORT100_IN_PROT_CHECK_SOF 0x0A +#define PORT100_IN_PROT_ADD_EOF 0x0B +#define PORT100_IN_PROT_CHECK_EOF 0x0C +#define PORT100_IN_PROT_DEAF_TIME 0x0E +#define PORT100_IN_PROT_CRM 0x0F +#define PORT100_IN_PROT_CRM_MIN_LEN 0x10 +#define PORT100_IN_PROT_T1_TAG_FRAME 0x11 +#define PORT100_IN_PROT_RFCA 0x12 +#define PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR 0x13 +#define PORT100_IN_PROT_END 0x14 + +#define PORT100_IN_MAX_NUM_PROTOCOLS 19 + +#define PORT100_TG_PROT_TU 0x00 +#define PORT100_TG_PROT_RF_OFF 0x01 +#define PORT100_TG_PROT_CRM 0x02 +#define PORT100_TG_PROT_END 0x03 + +#define PORT100_TG_MAX_NUM_PROTOCOLS 3 + +struct port100_protocol { + u8 number; + u8 value; +} __packed; + +static struct port100_protocol +in_protocols[][PORT100_IN_MAX_NUM_PROTOCOLS + 1] = { + [NFC_DIGITAL_FRAMING_NFCA_SHORT] = { + { PORT100_IN_PROT_INITIAL_GUARD_TIME, 6 }, + { PORT100_IN_PROT_ADD_CRC, 0 }, + { PORT100_IN_PROT_CHECK_CRC, 0 }, + { PORT100_IN_PROT_MULTI_CARD, 0 }, + { PORT100_IN_PROT_ADD_PARITY, 0 }, + { PORT100_IN_PROT_CHECK_PARITY, 1 }, + { PORT100_IN_PROT_BITWISE_AC_RECV_MODE, 0 }, + { PORT100_IN_PROT_VALID_BIT_NUMBER, 7 }, + { PORT100_IN_PROT_CRYPTO1, 0 }, + { PORT100_IN_PROT_ADD_SOF, 0 }, + { PORT100_IN_PROT_CHECK_SOF, 0 }, + { PORT100_IN_PROT_ADD_EOF, 0 }, + { PORT100_IN_PROT_CHECK_EOF, 0 }, + { PORT100_IN_PROT_DEAF_TIME, 4 }, + { PORT100_IN_PROT_CRM, 0 }, + { PORT100_IN_PROT_CRM_MIN_LEN, 0 }, + { PORT100_IN_PROT_T1_TAG_FRAME, 0 }, + { PORT100_IN_PROT_RFCA, 0 }, + { PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 }, + { PORT100_IN_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCA_STANDARD] = { + { PORT100_IN_PROT_INITIAL_GUARD_TIME, 6 }, + { PORT100_IN_PROT_ADD_CRC, 0 }, + { PORT100_IN_PROT_CHECK_CRC, 0 }, + { PORT100_IN_PROT_MULTI_CARD, 0 }, + { PORT100_IN_PROT_ADD_PARITY, 1 }, + { PORT100_IN_PROT_CHECK_PARITY, 1 }, + { PORT100_IN_PROT_BITWISE_AC_RECV_MODE, 0 }, + { PORT100_IN_PROT_VALID_BIT_NUMBER, 8 }, + { PORT100_IN_PROT_CRYPTO1, 0 }, + { PORT100_IN_PROT_ADD_SOF, 0 }, + { PORT100_IN_PROT_CHECK_SOF, 0 }, + { PORT100_IN_PROT_ADD_EOF, 0 }, + { PORT100_IN_PROT_CHECK_EOF, 0 }, + { PORT100_IN_PROT_DEAF_TIME, 4 }, + { PORT100_IN_PROT_CRM, 0 }, + { PORT100_IN_PROT_CRM_MIN_LEN, 0 }, + { PORT100_IN_PROT_T1_TAG_FRAME, 0 }, + { PORT100_IN_PROT_RFCA, 0 }, + { PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 }, + { PORT100_IN_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A] = { + { PORT100_IN_PROT_INITIAL_GUARD_TIME, 6 }, + { PORT100_IN_PROT_ADD_CRC, 1 }, + { PORT100_IN_PROT_CHECK_CRC, 1 }, + { PORT100_IN_PROT_MULTI_CARD, 0 }, + { PORT100_IN_PROT_ADD_PARITY, 1 }, + { PORT100_IN_PROT_CHECK_PARITY, 1 }, + { PORT100_IN_PROT_BITWISE_AC_RECV_MODE, 0 }, + { PORT100_IN_PROT_VALID_BIT_NUMBER, 8 }, + { PORT100_IN_PROT_CRYPTO1, 0 }, + { PORT100_IN_PROT_ADD_SOF, 0 }, + { PORT100_IN_PROT_CHECK_SOF, 0 }, + { PORT100_IN_PROT_ADD_EOF, 0 }, + { PORT100_IN_PROT_CHECK_EOF, 0 }, + { PORT100_IN_PROT_DEAF_TIME, 4 }, + { PORT100_IN_PROT_CRM, 0 }, + { PORT100_IN_PROT_CRM_MIN_LEN, 0 }, + { PORT100_IN_PROT_T1_TAG_FRAME, 0 }, + { PORT100_IN_PROT_RFCA, 0 }, + { PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 }, + { PORT100_IN_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCA_T1T] = { + /* nfc_digital_framing_nfca_short */ + { PORT100_IN_PROT_ADD_CRC, 2 }, + { PORT100_IN_PROT_CHECK_CRC, 2 }, + { PORT100_IN_PROT_VALID_BIT_NUMBER, 8 }, + { PORT100_IN_PROT_T1_TAG_FRAME, 2 }, + { PORT100_IN_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCA_T2T] = { + /* nfc_digital_framing_nfca_standard */ + { PORT100_IN_PROT_ADD_CRC, 1 }, + { PORT100_IN_PROT_CHECK_CRC, 0 }, + { PORT100_IN_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCA_T4T] = { + /* nfc_digital_framing_nfca_standard_with_crc_a */ + { PORT100_IN_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCA_NFC_DEP] = { + /* nfc_digital_framing_nfca_standard */ + { PORT100_IN_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCF] = { + { PORT100_IN_PROT_INITIAL_GUARD_TIME, 18 }, + { PORT100_IN_PROT_ADD_CRC, 1 }, + { PORT100_IN_PROT_CHECK_CRC, 1 }, + { PORT100_IN_PROT_MULTI_CARD, 0 }, + { PORT100_IN_PROT_ADD_PARITY, 0 }, + { PORT100_IN_PROT_CHECK_PARITY, 0 }, + { PORT100_IN_PROT_BITWISE_AC_RECV_MODE, 0 }, + { PORT100_IN_PROT_VALID_BIT_NUMBER, 8 }, + { PORT100_IN_PROT_CRYPTO1, 0 }, + { PORT100_IN_PROT_ADD_SOF, 0 }, + { PORT100_IN_PROT_CHECK_SOF, 0 }, + { PORT100_IN_PROT_ADD_EOF, 0 }, + { PORT100_IN_PROT_CHECK_EOF, 0 }, + { PORT100_IN_PROT_DEAF_TIME, 4 }, + { PORT100_IN_PROT_CRM, 0 }, + { PORT100_IN_PROT_CRM_MIN_LEN, 0 }, + { PORT100_IN_PROT_T1_TAG_FRAME, 0 }, + { PORT100_IN_PROT_RFCA, 0 }, + { PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 }, + { PORT100_IN_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCF_T3T] = { + /* nfc_digital_framing_nfcf */ + { PORT100_IN_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCF_NFC_DEP] = { + /* nfc_digital_framing_nfcf */ + { PORT100_IN_PROT_INITIAL_GUARD_TIME, 18 }, + { PORT100_IN_PROT_ADD_CRC, 1 }, + { PORT100_IN_PROT_CHECK_CRC, 1 }, + { PORT100_IN_PROT_MULTI_CARD, 0 }, + { PORT100_IN_PROT_ADD_PARITY, 0 }, + { PORT100_IN_PROT_CHECK_PARITY, 0 }, + { PORT100_IN_PROT_BITWISE_AC_RECV_MODE, 0 }, + { PORT100_IN_PROT_VALID_BIT_NUMBER, 8 }, + { PORT100_IN_PROT_CRYPTO1, 0 }, + { PORT100_IN_PROT_ADD_SOF, 0 }, + { PORT100_IN_PROT_CHECK_SOF, 0 }, + { PORT100_IN_PROT_ADD_EOF, 0 }, + { PORT100_IN_PROT_CHECK_EOF, 0 }, + { PORT100_IN_PROT_DEAF_TIME, 4 }, + { PORT100_IN_PROT_CRM, 0 }, + { PORT100_IN_PROT_CRM_MIN_LEN, 0 }, + { PORT100_IN_PROT_T1_TAG_FRAME, 0 }, + { PORT100_IN_PROT_RFCA, 0 }, + { PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 }, + { PORT100_IN_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED] = { + { PORT100_IN_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCB] = { + { PORT100_IN_PROT_INITIAL_GUARD_TIME, 20 }, + { PORT100_IN_PROT_ADD_CRC, 1 }, + { PORT100_IN_PROT_CHECK_CRC, 1 }, + { PORT100_IN_PROT_MULTI_CARD, 0 }, + { PORT100_IN_PROT_ADD_PARITY, 0 }, + { PORT100_IN_PROT_CHECK_PARITY, 0 }, + { PORT100_IN_PROT_BITWISE_AC_RECV_MODE, 0 }, + { PORT100_IN_PROT_VALID_BIT_NUMBER, 8 }, + { PORT100_IN_PROT_CRYPTO1, 0 }, + { PORT100_IN_PROT_ADD_SOF, 1 }, + { PORT100_IN_PROT_CHECK_SOF, 1 }, + { PORT100_IN_PROT_ADD_EOF, 1 }, + { PORT100_IN_PROT_CHECK_EOF, 1 }, + { PORT100_IN_PROT_DEAF_TIME, 4 }, + { PORT100_IN_PROT_CRM, 0 }, + { PORT100_IN_PROT_CRM_MIN_LEN, 0 }, + { PORT100_IN_PROT_T1_TAG_FRAME, 0 }, + { PORT100_IN_PROT_RFCA, 0 }, + { PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 }, + { PORT100_IN_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCB_T4T] = { + /* nfc_digital_framing_nfcb */ + { PORT100_IN_PROT_END, 0 }, + }, + /* Ensures the array has NFC_DIGITAL_FRAMING_LAST elements */ + [NFC_DIGITAL_FRAMING_LAST] = { + { PORT100_IN_PROT_END, 0 }, + }, +}; + +static struct port100_protocol +tg_protocols[][PORT100_TG_MAX_NUM_PROTOCOLS + 1] = { + [NFC_DIGITAL_FRAMING_NFCA_SHORT] = { + { PORT100_TG_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCA_STANDARD] = { + { PORT100_TG_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A] = { + { PORT100_TG_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCA_T1T] = { + { PORT100_TG_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCA_T2T] = { + { PORT100_TG_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCA_NFC_DEP] = { + { PORT100_TG_PROT_TU, 1 }, + { PORT100_TG_PROT_RF_OFF, 0 }, + { PORT100_TG_PROT_CRM, 7 }, + { PORT100_TG_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCF] = { + { PORT100_TG_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCF_T3T] = { + { PORT100_TG_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFCF_NFC_DEP] = { + { PORT100_TG_PROT_TU, 1 }, + { PORT100_TG_PROT_RF_OFF, 0 }, + { PORT100_TG_PROT_CRM, 7 }, + { PORT100_TG_PROT_END, 0 }, + }, + [NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED] = { + { PORT100_TG_PROT_RF_OFF, 1 }, + { PORT100_TG_PROT_END, 0 }, + }, + /* Ensures the array has NFC_DIGITAL_FRAMING_LAST elements */ + [NFC_DIGITAL_FRAMING_LAST] = { + { PORT100_TG_PROT_END, 0 }, + }, +}; + +struct port100 { + struct nfc_digital_dev *nfc_digital_dev; + + int skb_headroom; + int skb_tailroom; + + struct usb_device *udev; + struct usb_interface *interface; + + struct urb *out_urb; + struct urb *in_urb; + + /* This mutex protects the out_urb and avoids to submit a new command + * through port100_send_frame_async() while the previous one is being + * canceled through port100_abort_cmd(). + */ + struct mutex out_urb_lock; + + struct work_struct cmd_complete_work; + + u8 cmd_type; + + /* The digital stack serializes commands to be sent. There is no need + * for any queuing/locking mechanism at driver level. + */ + struct port100_cmd *cmd; + + bool cmd_cancel; + struct completion cmd_cancel_done; +}; + +struct port100_cmd { + u8 code; + int status; + struct sk_buff *req; + struct sk_buff *resp; + int resp_len; + port100_send_async_complete_t complete_cb; + void *complete_cb_context; +}; + +struct port100_frame { + u8 preamble; + __be16 start_frame; + __be16 extended_frame; + __le16 datalen; + u8 datalen_checksum; + u8 data[]; +} __packed; + +struct port100_ack_frame { + u8 preamble; + __be16 start_frame; + __be16 ack_frame; + u8 postambule; +} __packed; + +struct port100_cb_arg { + nfc_digital_cmd_complete_t complete_cb; + void *complete_arg; + u8 mdaa; +}; + +struct port100_tg_comm_rf_cmd { + __le16 guard_time; + __le16 send_timeout; + u8 mdaa; + u8 nfca_param[6]; + u8 nfcf_param[18]; + u8 mf_halted; + u8 arae_flag; + __le16 recv_timeout; + u8 data[]; +} __packed; + +struct port100_tg_comm_rf_res { + u8 comm_type; + u8 ar_status; + u8 target_activated; + __le32 status; + u8 data[]; +} __packed; + +/* The rule: value + checksum = 0 */ +static inline u8 port100_checksum(u16 value) +{ + return ~(((u8 *)&value)[0] + ((u8 *)&value)[1]) + 1; +} + +/* The rule: sum(data elements) + checksum = 0 */ +static u8 port100_data_checksum(u8 *data, int datalen) +{ + u8 sum = 0; + int i; + + for (i = 0; i < datalen; i++) + sum += data[i]; + + return port100_checksum(sum); +} + +static void port100_tx_frame_init(void *_frame, u8 cmd_code) +{ + struct port100_frame *frame = _frame; + + frame->preamble = 0; + frame->start_frame = cpu_to_be16(PORT100_FRAME_SOF); + frame->extended_frame = cpu_to_be16(PORT100_FRAME_EXT); + PORT100_FRAME_DIRECTION(frame) = PORT100_FRAME_DIR_OUT; + PORT100_FRAME_CMD(frame) = cmd_code; + frame->datalen = cpu_to_le16(2); +} + +static void port100_tx_frame_finish(void *_frame) +{ + struct port100_frame *frame = _frame; + + frame->datalen_checksum = port100_checksum(le16_to_cpu(frame->datalen)); + + PORT100_FRAME_CHECKSUM(frame) = + port100_data_checksum(frame->data, le16_to_cpu(frame->datalen)); + + PORT100_FRAME_POSTAMBLE(frame) = 0; +} + +static void port100_tx_update_payload_len(void *_frame, int len) +{ + struct port100_frame *frame = _frame; + + frame->datalen = cpu_to_le16(le16_to_cpu(frame->datalen) + len); +} + +static bool port100_rx_frame_is_valid(void *_frame) +{ + u8 checksum; + struct port100_frame *frame = _frame; + + if (frame->start_frame != cpu_to_be16(PORT100_FRAME_SOF) || + frame->extended_frame != cpu_to_be16(PORT100_FRAME_EXT)) + return false; + + checksum = port100_checksum(le16_to_cpu(frame->datalen)); + if (checksum != frame->datalen_checksum) + return false; + + checksum = port100_data_checksum(frame->data, + le16_to_cpu(frame->datalen)); + if (checksum != PORT100_FRAME_CHECKSUM(frame)) + return false; + + return true; +} + +static bool port100_rx_frame_is_ack(struct port100_ack_frame *frame) +{ + return (frame->start_frame == cpu_to_be16(PORT100_FRAME_SOF) && + frame->ack_frame == cpu_to_be16(PORT100_FRAME_ACK)); +} + +static inline int port100_rx_frame_size(void *frame) +{ + struct port100_frame *f = frame; + + return sizeof(struct port100_frame) + le16_to_cpu(f->datalen) + + PORT100_FRAME_TAIL_LEN; +} + +static bool port100_rx_frame_is_cmd_response(struct port100 *dev, void *frame) +{ + struct port100_frame *f = frame; + + return (PORT100_FRAME_CMD(f) == PORT100_CMD_RESPONSE(dev->cmd->code)); +} + +static void port100_recv_response(struct urb *urb) +{ + struct port100 *dev = urb->context; + struct port100_cmd *cmd = dev->cmd; + u8 *in_frame; + + cmd->status = urb->status; + + switch (urb->status) { + case 0: + break; /* success */ + case -ECONNRESET: + case -ENOENT: + nfc_err(&dev->interface->dev, + "The urb has been canceled (status %d)\n", urb->status); + goto sched_wq; + case -ESHUTDOWN: + default: + nfc_err(&dev->interface->dev, "Urb failure (status %d)\n", + urb->status); + goto sched_wq; + } + + in_frame = dev->in_urb->transfer_buffer; + + if (!port100_rx_frame_is_valid(in_frame)) { + nfc_err(&dev->interface->dev, "Received an invalid frame\n"); + cmd->status = -EIO; + goto sched_wq; + } + + print_hex_dump_debug("PORT100 RX: ", DUMP_PREFIX_NONE, 16, 1, in_frame, + port100_rx_frame_size(in_frame), false); + + if (!port100_rx_frame_is_cmd_response(dev, in_frame)) { + nfc_err(&dev->interface->dev, + "It's not the response to the last command\n"); + cmd->status = -EIO; + goto sched_wq; + } + +sched_wq: + schedule_work(&dev->cmd_complete_work); +} + +static int port100_submit_urb_for_response(struct port100 *dev, gfp_t flags) +{ + dev->in_urb->complete = port100_recv_response; + + return usb_submit_urb(dev->in_urb, flags); +} + +static void port100_recv_ack(struct urb *urb) +{ + struct port100 *dev = urb->context; + struct port100_cmd *cmd = dev->cmd; + struct port100_ack_frame *in_frame; + int rc; + + cmd->status = urb->status; + + switch (urb->status) { + case 0: + break; /* success */ + case -ECONNRESET: + case -ENOENT: + nfc_err(&dev->interface->dev, + "The urb has been stopped (status %d)\n", urb->status); + goto sched_wq; + case -ESHUTDOWN: + default: + nfc_err(&dev->interface->dev, "Urb failure (status %d)\n", + urb->status); + goto sched_wq; + } + + in_frame = dev->in_urb->transfer_buffer; + + if (!port100_rx_frame_is_ack(in_frame)) { + nfc_err(&dev->interface->dev, "Received an invalid ack\n"); + cmd->status = -EIO; + goto sched_wq; + } + + rc = port100_submit_urb_for_response(dev, GFP_ATOMIC); + if (rc) { + nfc_err(&dev->interface->dev, + "usb_submit_urb failed with result %d\n", rc); + cmd->status = rc; + goto sched_wq; + } + + return; + +sched_wq: + schedule_work(&dev->cmd_complete_work); +} + +static int port100_submit_urb_for_ack(struct port100 *dev, gfp_t flags) +{ + dev->in_urb->complete = port100_recv_ack; + + return usb_submit_urb(dev->in_urb, flags); +} + +static int port100_send_ack(struct port100 *dev) +{ + int rc; + + mutex_lock(&dev->out_urb_lock); + + init_completion(&dev->cmd_cancel_done); + + usb_kill_urb(dev->out_urb); + + dev->out_urb->transfer_buffer = ack_frame; + dev->out_urb->transfer_buffer_length = sizeof(ack_frame); + rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); + + /* Set the cmd_cancel flag only if the URB has been successfully + * submitted. It will be reset by the out URB completion callback + * port100_send_complete(). + */ + dev->cmd_cancel = !rc; + + mutex_unlock(&dev->out_urb_lock); + + if (!rc) + wait_for_completion(&dev->cmd_cancel_done); + + return rc; +} + +static int port100_send_frame_async(struct port100 *dev, struct sk_buff *out, + struct sk_buff *in, int in_len) +{ + int rc; + + mutex_lock(&dev->out_urb_lock); + + /* A command cancel frame as been sent through dev->out_urb. Don't try + * to submit a new one. + */ + if (dev->cmd_cancel) { + rc = -EAGAIN; + goto exit; + } + + dev->out_urb->transfer_buffer = out->data; + dev->out_urb->transfer_buffer_length = out->len; + + dev->in_urb->transfer_buffer = in->data; + dev->in_urb->transfer_buffer_length = in_len; + + print_hex_dump_debug("PORT100 TX: ", DUMP_PREFIX_NONE, 16, 1, + out->data, out->len, false); + + rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); + if (rc) + goto exit; + + rc = port100_submit_urb_for_ack(dev, GFP_KERNEL); + if (rc) + usb_unlink_urb(dev->out_urb); + +exit: + mutex_unlock(&dev->out_urb_lock); + + return rc; +} + +static void port100_build_cmd_frame(struct port100 *dev, u8 cmd_code, + struct sk_buff *skb) +{ + /* payload is already there, just update datalen */ + int payload_len = skb->len; + + skb_push(skb, PORT100_FRAME_HEADER_LEN); + skb_put(skb, PORT100_FRAME_TAIL_LEN); + + port100_tx_frame_init(skb->data, cmd_code); + port100_tx_update_payload_len(skb->data, payload_len); + port100_tx_frame_finish(skb->data); +} + +static void port100_send_async_complete(struct port100 *dev) +{ + struct port100_cmd *cmd = dev->cmd; + int status = cmd->status; + + struct sk_buff *req = cmd->req; + struct sk_buff *resp = cmd->resp; + + dev_kfree_skb(req); + + dev->cmd = NULL; + + if (status < 0) { + cmd->complete_cb(dev, cmd->complete_cb_context, + ERR_PTR(status)); + dev_kfree_skb(resp); + goto done; + } + + skb_put(resp, port100_rx_frame_size(resp->data)); + skb_pull(resp, PORT100_FRAME_HEADER_LEN); + skb_trim(resp, resp->len - PORT100_FRAME_TAIL_LEN); + + cmd->complete_cb(dev, cmd->complete_cb_context, resp); + +done: + kfree(cmd); +} + +static int port100_send_cmd_async(struct port100 *dev, u8 cmd_code, + struct sk_buff *req, + port100_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + struct port100_cmd *cmd; + struct sk_buff *resp; + int rc; + int resp_len = PORT100_FRAME_HEADER_LEN + + PORT100_FRAME_MAX_PAYLOAD_LEN + + PORT100_FRAME_TAIL_LEN; + + if (dev->cmd) { + nfc_err(&dev->interface->dev, + "A command is still in process\n"); + return -EBUSY; + } + + resp = alloc_skb(resp_len, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + dev_kfree_skb(resp); + return -ENOMEM; + } + + cmd->code = cmd_code; + cmd->req = req; + cmd->resp = resp; + cmd->resp_len = resp_len; + cmd->complete_cb = complete_cb; + cmd->complete_cb_context = complete_cb_context; + + port100_build_cmd_frame(dev, cmd_code, req); + + dev->cmd = cmd; + + rc = port100_send_frame_async(dev, req, resp, resp_len); + if (rc) { + kfree(cmd); + dev_kfree_skb(resp); + dev->cmd = NULL; + } + + return rc; +} + +struct port100_sync_cmd_response { + struct sk_buff *resp; + struct completion done; +}; + +static void port100_wq_cmd_complete(struct work_struct *work) +{ + struct port100 *dev = container_of(work, struct port100, + cmd_complete_work); + + port100_send_async_complete(dev); +} + +static void port100_send_sync_complete(struct port100 *dev, void *_arg, + struct sk_buff *resp) +{ + struct port100_sync_cmd_response *arg = _arg; + + arg->resp = resp; + complete(&arg->done); +} + +static struct sk_buff *port100_send_cmd_sync(struct port100 *dev, u8 cmd_code, + struct sk_buff *req) +{ + int rc; + struct port100_sync_cmd_response arg; + + init_completion(&arg.done); + + rc = port100_send_cmd_async(dev, cmd_code, req, + port100_send_sync_complete, &arg); + if (rc) { + dev_kfree_skb(req); + return ERR_PTR(rc); + } + + wait_for_completion(&arg.done); + + return arg.resp; +} + +static void port100_send_complete(struct urb *urb) +{ + struct port100 *dev = urb->context; + + if (dev->cmd_cancel) { + dev->cmd_cancel = false; + complete(&dev->cmd_cancel_done); + } + + switch (urb->status) { + case 0: + break; /* success */ + case -ECONNRESET: + case -ENOENT: + nfc_err(&dev->interface->dev, + "The urb has been stopped (status %d)\n", urb->status); + break; + case -ESHUTDOWN: + default: + nfc_err(&dev->interface->dev, "Urb failure (status %d)\n", + urb->status); + } +} + +static void port100_abort_cmd(struct nfc_digital_dev *ddev) +{ + struct port100 *dev = nfc_digital_get_drvdata(ddev); + + /* An ack will cancel the last issued command */ + port100_send_ack(dev); + + /* cancel the urb request */ + usb_kill_urb(dev->in_urb); +} + +static struct sk_buff *port100_alloc_skb(struct port100 *dev, unsigned int size) +{ + struct sk_buff *skb; + + skb = alloc_skb(dev->skb_headroom + dev->skb_tailroom + size, + GFP_KERNEL); + if (skb) + skb_reserve(skb, dev->skb_headroom); + + return skb; +} + +static int port100_set_command_type(struct port100 *dev, u8 command_type) +{ + struct sk_buff *skb; + struct sk_buff *resp; + int rc; + + skb = port100_alloc_skb(dev, 1); + if (!skb) + return -ENOMEM; + + *skb_put(skb, sizeof(u8)) = command_type; + + resp = port100_send_cmd_sync(dev, PORT100_CMD_SET_COMMAND_TYPE, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); + + rc = resp->data[0]; + + dev_kfree_skb(resp); + + return rc; +} + +static u64 port100_get_command_type_mask(struct port100 *dev) +{ + struct sk_buff *skb; + struct sk_buff *resp; + u64 mask; + + skb = port100_alloc_skb(dev, 0); + if (!skb) + return -ENOMEM; + + resp = port100_send_cmd_sync(dev, PORT100_CMD_GET_COMMAND_TYPE, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); + + if (resp->len < 8) + mask = 0; + else + mask = be64_to_cpu(*(__be64 *)resp->data); + + dev_kfree_skb(resp); + + return mask; +} + +static u16 port100_get_firmware_version(struct port100 *dev) +{ + struct sk_buff *skb; + struct sk_buff *resp; + u16 fw_ver; + + skb = port100_alloc_skb(dev, 0); + if (!skb) + return 0; + + resp = port100_send_cmd_sync(dev, PORT100_CMD_GET_FIRMWARE_VERSION, + skb); + if (IS_ERR(resp)) + return 0; + + fw_ver = le16_to_cpu(*(__le16 *)resp->data); + + dev_kfree_skb(resp); + + return fw_ver; +} + +static int port100_switch_rf(struct nfc_digital_dev *ddev, bool on) +{ + struct port100 *dev = nfc_digital_get_drvdata(ddev); + struct sk_buff *skb, *resp; + + skb = port100_alloc_skb(dev, 1); + if (!skb) + return -ENOMEM; + + *skb_put(skb, 1) = on ? 1 : 0; + + /* Cancel the last command if the device is being switched off */ + if (!on) + port100_abort_cmd(ddev); + + resp = port100_send_cmd_sync(dev, PORT100_CMD_SWITCH_RF, skb); + + if (IS_ERR(resp)) + return PTR_ERR(resp); + + dev_kfree_skb(resp); + + return 0; +} + +static int port100_in_set_rf(struct nfc_digital_dev *ddev, u8 rf) +{ + struct port100 *dev = nfc_digital_get_drvdata(ddev); + struct sk_buff *skb; + struct sk_buff *resp; + int rc; + + if (rf >= NFC_DIGITAL_RF_TECH_LAST) + return -EINVAL; + + skb = port100_alloc_skb(dev, sizeof(struct port100_in_rf_setting)); + if (!skb) + return -ENOMEM; + + memcpy(skb_put(skb, sizeof(struct port100_in_rf_setting)), + &in_rf_settings[rf], + sizeof(struct port100_in_rf_setting)); + + resp = port100_send_cmd_sync(dev, PORT100_CMD_IN_SET_RF, skb); + + if (IS_ERR(resp)) + return PTR_ERR(resp); + + rc = resp->data[0]; + + dev_kfree_skb(resp); + + return rc; +} + +static int port100_in_set_framing(struct nfc_digital_dev *ddev, int param) +{ + struct port100 *dev = nfc_digital_get_drvdata(ddev); + struct port100_protocol *protocols; + struct sk_buff *skb; + struct sk_buff *resp; + int num_protocols; + size_t size; + int rc; + + if (param >= NFC_DIGITAL_FRAMING_LAST) + return -EINVAL; + + protocols = in_protocols[param]; + + num_protocols = 0; + while (protocols[num_protocols].number != PORT100_IN_PROT_END) + num_protocols++; + + if (!num_protocols) + return 0; + + size = sizeof(struct port100_protocol) * num_protocols; + + skb = port100_alloc_skb(dev, size); + if (!skb) + return -ENOMEM; + + memcpy(skb_put(skb, size), protocols, size); + + resp = port100_send_cmd_sync(dev, PORT100_CMD_IN_SET_PROTOCOL, skb); + + if (IS_ERR(resp)) + return PTR_ERR(resp); + + rc = resp->data[0]; + + dev_kfree_skb(resp); + + return rc; +} + +static int port100_in_configure_hw(struct nfc_digital_dev *ddev, int type, + int param) +{ + if (type == NFC_DIGITAL_CONFIG_RF_TECH) + return port100_in_set_rf(ddev, param); + + if (type == NFC_DIGITAL_CONFIG_FRAMING) + return port100_in_set_framing(ddev, param); + + return -EINVAL; +} + +static void port100_in_comm_rf_complete(struct port100 *dev, void *arg, + struct sk_buff *resp) +{ + struct port100_cb_arg *cb_arg = arg; + nfc_digital_cmd_complete_t cb = cb_arg->complete_cb; + u32 status; + int rc; + + if (IS_ERR(resp)) { + rc = PTR_ERR(resp); + goto exit; + } + + if (resp->len < 4) { + nfc_err(&dev->interface->dev, + "Invalid packet length received\n"); + rc = -EIO; + goto error; + } + + status = le32_to_cpu(*(__le32 *)resp->data); + + skb_pull(resp, sizeof(u32)); + + if (status == PORT100_CMD_STATUS_TIMEOUT) { + rc = -ETIMEDOUT; + goto error; + } + + if (status != PORT100_CMD_STATUS_OK) { + nfc_err(&dev->interface->dev, + "in_comm_rf failed with status 0x%08x\n", status); + rc = -EIO; + goto error; + } + + /* Remove collision bits byte */ + skb_pull(resp, 1); + + goto exit; + +error: + kfree_skb(resp); + resp = ERR_PTR(rc); + +exit: + cb(dev->nfc_digital_dev, cb_arg->complete_arg, resp); + + kfree(cb_arg); +} + +static int port100_in_send_cmd(struct nfc_digital_dev *ddev, + struct sk_buff *skb, u16 _timeout, + nfc_digital_cmd_complete_t cb, void *arg) +{ + struct port100 *dev = nfc_digital_get_drvdata(ddev); + struct port100_cb_arg *cb_arg; + __le16 timeout; + + cb_arg = kzalloc(sizeof(struct port100_cb_arg), GFP_KERNEL); + if (!cb_arg) + return -ENOMEM; + + cb_arg->complete_cb = cb; + cb_arg->complete_arg = arg; + + timeout = cpu_to_le16(_timeout * 10); + + memcpy(skb_push(skb, sizeof(__le16)), &timeout, sizeof(__le16)); + + return port100_send_cmd_async(dev, PORT100_CMD_IN_COMM_RF, skb, + port100_in_comm_rf_complete, cb_arg); +} + +static int port100_tg_set_rf(struct nfc_digital_dev *ddev, u8 rf) +{ + struct port100 *dev = nfc_digital_get_drvdata(ddev); + struct sk_buff *skb; + struct sk_buff *resp; + int rc; + + if (rf >= NFC_DIGITAL_RF_TECH_LAST) + return -EINVAL; + + skb = port100_alloc_skb(dev, sizeof(struct port100_tg_rf_setting)); + if (!skb) + return -ENOMEM; + + memcpy(skb_put(skb, sizeof(struct port100_tg_rf_setting)), + &tg_rf_settings[rf], + sizeof(struct port100_tg_rf_setting)); + + resp = port100_send_cmd_sync(dev, PORT100_CMD_TG_SET_RF, skb); + + if (IS_ERR(resp)) + return PTR_ERR(resp); + + rc = resp->data[0]; + + dev_kfree_skb(resp); + + return rc; +} + +static int port100_tg_set_framing(struct nfc_digital_dev *ddev, int param) +{ + struct port100 *dev = nfc_digital_get_drvdata(ddev); + struct port100_protocol *protocols; + struct sk_buff *skb; + struct sk_buff *resp; + int rc; + int num_protocols; + size_t size; + + if (param >= NFC_DIGITAL_FRAMING_LAST) + return -EINVAL; + + protocols = tg_protocols[param]; + + num_protocols = 0; + while (protocols[num_protocols].number != PORT100_TG_PROT_END) + num_protocols++; + + if (!num_protocols) + return 0; + + size = sizeof(struct port100_protocol) * num_protocols; + + skb = port100_alloc_skb(dev, size); + if (!skb) + return -ENOMEM; + + memcpy(skb_put(skb, size), protocols, size); + + resp = port100_send_cmd_sync(dev, PORT100_CMD_TG_SET_PROTOCOL, skb); + + if (IS_ERR(resp)) + return PTR_ERR(resp); + + rc = resp->data[0]; + + dev_kfree_skb(resp); + + return rc; +} + +static int port100_tg_configure_hw(struct nfc_digital_dev *ddev, int type, + int param) +{ + if (type == NFC_DIGITAL_CONFIG_RF_TECH) + return port100_tg_set_rf(ddev, param); + + if (type == NFC_DIGITAL_CONFIG_FRAMING) + return port100_tg_set_framing(ddev, param); + + return -EINVAL; +} + +static bool port100_tg_target_activated(struct port100 *dev, u8 tgt_activated) +{ + u8 mask; + + switch (dev->cmd_type) { + case PORT100_CMD_TYPE_0: + mask = PORT100_MDAA_TGT_HAS_BEEN_ACTIVATED_MASK; + break; + case PORT100_CMD_TYPE_1: + mask = PORT100_MDAA_TGT_HAS_BEEN_ACTIVATED_MASK | + PORT100_MDAA_TGT_WAS_ACTIVATED_MASK; + break; + default: + nfc_err(&dev->interface->dev, "Unknown command type\n"); + return false; + } + + return ((tgt_activated & mask) == mask); +} + +static void port100_tg_comm_rf_complete(struct port100 *dev, void *arg, + struct sk_buff *resp) +{ + u32 status; + struct port100_cb_arg *cb_arg = arg; + nfc_digital_cmd_complete_t cb = cb_arg->complete_cb; + struct port100_tg_comm_rf_res *hdr; + + if (IS_ERR(resp)) + goto exit; + + hdr = (struct port100_tg_comm_rf_res *)resp->data; + + status = le32_to_cpu(hdr->status); + + if (cb_arg->mdaa && + !port100_tg_target_activated(dev, hdr->target_activated)) { + kfree_skb(resp); + resp = ERR_PTR(-ETIMEDOUT); + + goto exit; + } + + skb_pull(resp, sizeof(struct port100_tg_comm_rf_res)); + + if (status != PORT100_CMD_STATUS_OK) { + kfree_skb(resp); + + if (status == PORT100_CMD_STATUS_TIMEOUT) + resp = ERR_PTR(-ETIMEDOUT); + else + resp = ERR_PTR(-EIO); + } + +exit: + cb(dev->nfc_digital_dev, cb_arg->complete_arg, resp); + + kfree(cb_arg); +} + +static int port100_tg_send_cmd(struct nfc_digital_dev *ddev, + struct sk_buff *skb, u16 timeout, + nfc_digital_cmd_complete_t cb, void *arg) +{ + struct port100 *dev = nfc_digital_get_drvdata(ddev); + struct port100_tg_comm_rf_cmd *hdr; + struct port100_cb_arg *cb_arg; + + cb_arg = kzalloc(sizeof(struct port100_cb_arg), GFP_KERNEL); + if (!cb_arg) + return -ENOMEM; + + cb_arg->complete_cb = cb; + cb_arg->complete_arg = arg; + + skb_push(skb, sizeof(struct port100_tg_comm_rf_cmd)); + + hdr = (struct port100_tg_comm_rf_cmd *)skb->data; + + memset(hdr, 0, sizeof(struct port100_tg_comm_rf_cmd)); + hdr->guard_time = cpu_to_le16(500); + hdr->send_timeout = cpu_to_le16(0xFFFF); + hdr->recv_timeout = cpu_to_le16(timeout); + + return port100_send_cmd_async(dev, PORT100_CMD_TG_COMM_RF, skb, + port100_tg_comm_rf_complete, cb_arg); +} + +static int port100_listen_mdaa(struct nfc_digital_dev *ddev, + struct digital_tg_mdaa_params *params, + u16 timeout, + nfc_digital_cmd_complete_t cb, void *arg) +{ + struct port100 *dev = nfc_digital_get_drvdata(ddev); + struct port100_tg_comm_rf_cmd *hdr; + struct port100_cb_arg *cb_arg; + struct sk_buff *skb; + int rc; + + rc = port100_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_RF_TECH, + NFC_DIGITAL_RF_TECH_106A); + if (rc) + return rc; + + rc = port100_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_FRAMING, + NFC_DIGITAL_FRAMING_NFCA_NFC_DEP); + if (rc) + return rc; + + cb_arg = kzalloc(sizeof(struct port100_cb_arg), GFP_KERNEL); + if (!cb_arg) + return -ENOMEM; + + cb_arg->complete_cb = cb; + cb_arg->complete_arg = arg; + cb_arg->mdaa = 1; + + skb = port100_alloc_skb(dev, 0); + if (!skb) { + kfree(cb_arg); + return -ENOMEM; + } + + skb_push(skb, sizeof(struct port100_tg_comm_rf_cmd)); + hdr = (struct port100_tg_comm_rf_cmd *)skb->data; + + memset(hdr, 0, sizeof(struct port100_tg_comm_rf_cmd)); + + hdr->guard_time = 0; + hdr->send_timeout = cpu_to_le16(0xFFFF); + hdr->mdaa = 1; + hdr->nfca_param[0] = (params->sens_res >> 8) & 0xFF; + hdr->nfca_param[1] = params->sens_res & 0xFF; + memcpy(hdr->nfca_param + 2, params->nfcid1, 3); + hdr->nfca_param[5] = params->sel_res; + memcpy(hdr->nfcf_param, params->nfcid2, 8); + hdr->nfcf_param[16] = (params->sc >> 8) & 0xFF; + hdr->nfcf_param[17] = params->sc & 0xFF; + hdr->recv_timeout = cpu_to_le16(timeout); + + return port100_send_cmd_async(dev, PORT100_CMD_TG_COMM_RF, skb, + port100_tg_comm_rf_complete, cb_arg); +} + +static int port100_listen(struct nfc_digital_dev *ddev, u16 timeout, + nfc_digital_cmd_complete_t cb, void *arg) +{ + struct port100 *dev = nfc_digital_get_drvdata(ddev); + struct sk_buff *skb; + + skb = port100_alloc_skb(dev, 0); + if (!skb) + return -ENOMEM; + + return port100_tg_send_cmd(ddev, skb, timeout, cb, arg); +} + +static struct nfc_digital_ops port100_digital_ops = { + .in_configure_hw = port100_in_configure_hw, + .in_send_cmd = port100_in_send_cmd, + + .tg_listen_mdaa = port100_listen_mdaa, + .tg_listen = port100_listen, + .tg_configure_hw = port100_tg_configure_hw, + .tg_send_cmd = port100_tg_send_cmd, + + .switch_rf = port100_switch_rf, + .abort_cmd = port100_abort_cmd, +}; + +static const struct usb_device_id port100_table[] = { + { USB_DEVICE(SONY_VENDOR_ID, RCS380_PRODUCT_ID), }, + { } +}; +MODULE_DEVICE_TABLE(usb, port100_table); + +static int port100_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct port100 *dev; + int rc; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + int in_endpoint; + int out_endpoint; + u16 fw_version; + u64 cmd_type_mask; + int i; + + dev = devm_kzalloc(&interface->dev, sizeof(struct port100), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + mutex_init(&dev->out_urb_lock); + dev->udev = usb_get_dev(interface_to_usbdev(interface)); + dev->interface = interface; + usb_set_intfdata(interface, dev); + + in_endpoint = out_endpoint = 0; + iface_desc = interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint)) + in_endpoint = endpoint->bEndpointAddress; + + if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint)) + out_endpoint = endpoint->bEndpointAddress; + } + + if (!in_endpoint || !out_endpoint) { + nfc_err(&interface->dev, + "Could not find bulk-in or bulk-out endpoint\n"); + rc = -ENODEV; + goto error; + } + + dev->in_urb = usb_alloc_urb(0, GFP_KERNEL); + dev->out_urb = usb_alloc_urb(0, GFP_KERNEL); + + if (!dev->in_urb || !dev->out_urb) { + nfc_err(&interface->dev, "Could not allocate USB URBs\n"); + rc = -ENOMEM; + goto error; + } + + usb_fill_bulk_urb(dev->in_urb, dev->udev, + usb_rcvbulkpipe(dev->udev, in_endpoint), + NULL, 0, NULL, dev); + usb_fill_bulk_urb(dev->out_urb, dev->udev, + usb_sndbulkpipe(dev->udev, out_endpoint), + NULL, 0, port100_send_complete, dev); + + dev->skb_headroom = PORT100_FRAME_HEADER_LEN + + PORT100_COMM_RF_HEAD_MAX_LEN; + dev->skb_tailroom = PORT100_FRAME_TAIL_LEN; + + INIT_WORK(&dev->cmd_complete_work, port100_wq_cmd_complete); + + /* The first thing to do with the Port-100 is to set the command type + * to be used. If supported we use command type 1. 0 otherwise. + */ + cmd_type_mask = port100_get_command_type_mask(dev); + if (!cmd_type_mask) { + nfc_err(&interface->dev, + "Could not get supported command types\n"); + rc = -ENODEV; + goto error; + } + + if (PORT100_CMD_TYPE_IS_SUPPORTED(cmd_type_mask, PORT100_CMD_TYPE_1)) + dev->cmd_type = PORT100_CMD_TYPE_1; + else + dev->cmd_type = PORT100_CMD_TYPE_0; + + rc = port100_set_command_type(dev, dev->cmd_type); + if (rc) { + nfc_err(&interface->dev, + "The device does not support command type %u\n", + dev->cmd_type); + goto error; + } + + fw_version = port100_get_firmware_version(dev); + if (!fw_version) + nfc_err(&interface->dev, + "Could not get device firmware version\n"); + + nfc_info(&interface->dev, + "Sony NFC Port-100 Series attached (firmware v%x.%02x)\n", + (fw_version & 0xFF00) >> 8, fw_version & 0xFF); + + dev->nfc_digital_dev = nfc_digital_allocate_device(&port100_digital_ops, + PORT100_PROTOCOLS, + PORT100_CAPABILITIES, + dev->skb_headroom, + dev->skb_tailroom); + if (!dev->nfc_digital_dev) { + nfc_err(&interface->dev, + "Could not allocate nfc_digital_dev\n"); + rc = -ENOMEM; + goto error; + } + + nfc_digital_set_parent_dev(dev->nfc_digital_dev, &interface->dev); + nfc_digital_set_drvdata(dev->nfc_digital_dev, dev); + + rc = nfc_digital_register_device(dev->nfc_digital_dev); + if (rc) { + nfc_err(&interface->dev, + "Could not register digital device\n"); + goto free_nfc_dev; + } + + return 0; + +free_nfc_dev: + nfc_digital_free_device(dev->nfc_digital_dev); + +error: + usb_free_urb(dev->in_urb); + usb_free_urb(dev->out_urb); + usb_put_dev(dev->udev); + + return rc; +} + +static void port100_disconnect(struct usb_interface *interface) +{ + struct port100 *dev; + + dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + nfc_digital_unregister_device(dev->nfc_digital_dev); + nfc_digital_free_device(dev->nfc_digital_dev); + + usb_kill_urb(dev->in_urb); + usb_kill_urb(dev->out_urb); + + usb_free_urb(dev->in_urb); + usb_free_urb(dev->out_urb); + usb_put_dev(dev->udev); + + kfree(dev->cmd); + + nfc_info(&interface->dev, "Sony Port-100 NFC device disconnected\n"); +} + +static struct usb_driver port100_driver = { + .name = "port100", + .probe = port100_probe, + .disconnect = port100_disconnect, + .id_table = port100_table, +}; + +module_usb_driver(port100_driver); + +MODULE_DESCRIPTION("NFC Port-100 series usb driver ver " VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/nfc/s3fwrn5/Kconfig b/drivers/nfc/s3fwrn5/Kconfig new file mode 100644 index 0000000..47e31db --- /dev/null +++ b/drivers/nfc/s3fwrn5/Kconfig @@ -0,0 +1,22 @@ +config NFC_S3FWRN5 + tristate + depends on m + depends on CRYPTO + ---help--- + Core driver for Samsung S3FWRN5 NFC chip. Contains core utilities + of chip. It's intended to be used by PHYs to avoid duplicating lots + of common code. + +config NFC_S3FWRN5_I2C + tristate "Samsung S3FWRN5 I2C support" + depends on m + depends on NFC_NCI && I2C + select NFC_S3FWRN5 + default n + ---help--- + This module adds support for an I2C interface to the S3FWRN5 chip. + Select this if your platform is using the I2C bus. + + To compile this driver as a module, choose m here. The module will + be called s3fwrn5_i2c.ko. + Say N if unsure. diff --git a/drivers/nfc/s3fwrn5/Makefile b/drivers/nfc/s3fwrn5/Makefile new file mode 100644 index 0000000..aa698d4 --- /dev/null +++ b/drivers/nfc/s3fwrn5/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for Samsung S3FWRN5 NFC driver +# + +s3fwrn5-objs = core.o firmware.o nci.o +s3fwrn5_i2c-objs = i2c.o + +obj-$(CPTCFG_NFC_S3FWRN5) += s3fwrn5.o +obj-$(CPTCFG_NFC_S3FWRN5_I2C) += s3fwrn5_i2c.o diff --git a/drivers/nfc/s3fwrn5/core.c b/drivers/nfc/s3fwrn5/core.c new file mode 100644 index 0000000..9d9c8d5 --- /dev/null +++ b/drivers/nfc/s3fwrn5/core.c @@ -0,0 +1,219 @@ +/* + * NCI based driver for Samsung S3FWRN5 NFC chip + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <net/nfc/nci_core.h> + +#include "s3fwrn5.h" +#include "firmware.h" +#include "nci.h" + +#define S3FWRN5_NFC_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \ + NFC_PROTO_MIFARE_MASK | \ + NFC_PROTO_FELICA_MASK | \ + NFC_PROTO_ISO14443_MASK | \ + NFC_PROTO_ISO14443_B_MASK | \ + NFC_PROTO_ISO15693_MASK) + +static int s3fwrn5_firmware_update(struct s3fwrn5_info *info) +{ + bool need_update; + int ret; + + s3fwrn5_fw_init(&info->fw_info, "sec_s3fwrn5_firmware.bin"); + + /* Update firmware */ + + s3fwrn5_set_wake(info, false); + s3fwrn5_set_mode(info, S3FWRN5_MODE_FW); + + ret = s3fwrn5_fw_setup(&info->fw_info); + if (ret < 0) + return ret; + + need_update = s3fwrn5_fw_check_version(&info->fw_info, + info->ndev->manufact_specific_info); + if (!need_update) + goto out; + + dev_info(&info->ndev->nfc_dev->dev, "Detected new firmware version\n"); + + ret = s3fwrn5_fw_download(&info->fw_info); + if (ret < 0) + goto out; + + /* Update RF configuration */ + + s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI); + + s3fwrn5_set_wake(info, true); + ret = s3fwrn5_nci_rf_configure(info, "sec_s3fwrn5_rfreg.bin"); + s3fwrn5_set_wake(info, false); + +out: + s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD); + s3fwrn5_fw_cleanup(&info->fw_info); + return ret; +} + +static int s3fwrn5_nci_open(struct nci_dev *ndev) +{ + struct s3fwrn5_info *info = nci_get_drvdata(ndev); + + if (s3fwrn5_get_mode(info) != S3FWRN5_MODE_COLD) + return -EBUSY; + + s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI); + s3fwrn5_set_wake(info, true); + + return 0; +} + +static int s3fwrn5_nci_close(struct nci_dev *ndev) +{ + struct s3fwrn5_info *info = nci_get_drvdata(ndev); + + s3fwrn5_set_wake(info, false); + s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD); + + return 0; +} + +static int s3fwrn5_nci_send(struct nci_dev *ndev, struct sk_buff *skb) +{ + struct s3fwrn5_info *info = nci_get_drvdata(ndev); + int ret; + + mutex_lock(&info->mutex); + + if (s3fwrn5_get_mode(info) != S3FWRN5_MODE_NCI) { + mutex_unlock(&info->mutex); + return -EINVAL; + } + + ret = s3fwrn5_write(info, skb); + if (ret < 0) + kfree_skb(skb); + + mutex_unlock(&info->mutex); + return ret; +} + +static int s3fwrn5_nci_post_setup(struct nci_dev *ndev) +{ + struct s3fwrn5_info *info = nci_get_drvdata(ndev); + int ret; + + ret = s3fwrn5_firmware_update(info); + if (ret < 0) + goto out; + + /* NCI core reset */ + + s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI); + s3fwrn5_set_wake(info, true); + + ret = nci_core_reset(info->ndev); + if (ret < 0) + goto out; + + ret = nci_core_init(info->ndev); + +out: + return ret; +} + +static struct nci_ops s3fwrn5_nci_ops = { + .open = s3fwrn5_nci_open, + .close = s3fwrn5_nci_close, + .send = s3fwrn5_nci_send, + .post_setup = s3fwrn5_nci_post_setup, +}; + +int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev, + const struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload) +{ + struct s3fwrn5_info *info; + int ret; + + info = devm_kzalloc(pdev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->phy_id = phy_id; + info->pdev = pdev; + info->phy_ops = phy_ops; + info->max_payload = max_payload; + mutex_init(&info->mutex); + + s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD); + + s3fwrn5_nci_get_prop_ops(&s3fwrn5_nci_ops.prop_ops, + &s3fwrn5_nci_ops.n_prop_ops); + + info->ndev = nci_allocate_device(&s3fwrn5_nci_ops, + S3FWRN5_NFC_PROTOCOLS, 0, 0); + if (!info->ndev) + return -ENOMEM; + + nci_set_parent_dev(info->ndev, pdev); + nci_set_drvdata(info->ndev, info); + + ret = nci_register_device(info->ndev); + if (ret < 0) { + nci_free_device(info->ndev); + return ret; + } + + info->fw_info.ndev = info->ndev; + + *ndev = info->ndev; + + return ret; +} +EXPORT_SYMBOL(s3fwrn5_probe); + +void s3fwrn5_remove(struct nci_dev *ndev) +{ + struct s3fwrn5_info *info = nci_get_drvdata(ndev); + + s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD); + + nci_unregister_device(ndev); + nci_free_device(ndev); +} +EXPORT_SYMBOL(s3fwrn5_remove); + +int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb, + enum s3fwrn5_mode mode) +{ + switch (mode) { + case S3FWRN5_MODE_NCI: + return nci_recv_frame(ndev, skb); + case S3FWRN5_MODE_FW: + return s3fwrn5_fw_recv_frame(ndev, skb); + default: + return -ENODEV; + } +} +EXPORT_SYMBOL(s3fwrn5_recv_frame); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Samsung S3FWRN5 NFC driver"); +MODULE_AUTHOR("Robert Baldyga <r.baldyga@samsung.com>"); diff --git a/drivers/nfc/s3fwrn5/firmware.c b/drivers/nfc/s3fwrn5/firmware.c new file mode 100644 index 0000000..5f97da1 --- /dev/null +++ b/drivers/nfc/s3fwrn5/firmware.c @@ -0,0 +1,529 @@ +/* + * NCI based driver for Samsung S3FWRN5 NFC chip + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/completion.h> +#include <linux/firmware.h> +#include <crypto/hash.h> +#include <crypto/sha.h> + +#include "s3fwrn5.h" +#include "firmware.h" + +struct s3fwrn5_fw_version { + __u8 major; + __u8 build1; + __u8 build2; + __u8 target; +}; + +static int s3fwrn5_fw_send_msg(struct s3fwrn5_fw_info *fw_info, + struct sk_buff *msg, struct sk_buff **rsp) +{ + struct s3fwrn5_info *info = + container_of(fw_info, struct s3fwrn5_info, fw_info); + long ret; + + reinit_completion(&fw_info->completion); + + ret = s3fwrn5_write(info, msg); + if (ret < 0) + return ret; + + ret = wait_for_completion_interruptible_timeout( + &fw_info->completion, msecs_to_jiffies(1000)); + if (ret < 0) + return ret; + else if (ret == 0) + return -ENXIO; + + if (!fw_info->rsp) + return -EINVAL; + + *rsp = fw_info->rsp; + fw_info->rsp = NULL; + + return 0; +} + +static int s3fwrn5_fw_prep_msg(struct s3fwrn5_fw_info *fw_info, + struct sk_buff **msg, u8 type, u8 code, const void *data, u16 len) +{ + struct s3fwrn5_fw_header hdr; + struct sk_buff *skb; + + hdr.type = type | fw_info->parity; + fw_info->parity ^= 0x80; + hdr.code = code; + hdr.len = len; + + skb = alloc_skb(S3FWRN5_FW_HDR_SIZE + len, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + memcpy(skb_put(skb, S3FWRN5_FW_HDR_SIZE), &hdr, S3FWRN5_FW_HDR_SIZE); + if (len) + memcpy(skb_put(skb, len), data, len); + + *msg = skb; + + return 0; +} + +static int s3fwrn5_fw_get_bootinfo(struct s3fwrn5_fw_info *fw_info, + struct s3fwrn5_fw_cmd_get_bootinfo_rsp *bootinfo) +{ + struct sk_buff *msg, *rsp = NULL; + struct s3fwrn5_fw_header *hdr; + int ret; + + /* Send GET_BOOTINFO command */ + + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_CMD, + S3FWRN5_FW_CMD_GET_BOOTINFO, NULL, 0); + if (ret < 0) + return ret; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + return ret; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) { + ret = -EINVAL; + goto out; + } + + memcpy(bootinfo, rsp->data + S3FWRN5_FW_HDR_SIZE, 10); + +out: + kfree_skb(rsp); + return ret; +} + +static int s3fwrn5_fw_enter_update_mode(struct s3fwrn5_fw_info *fw_info, + const void *hash_data, u16 hash_size, + const void *sig_data, u16 sig_size) +{ + struct s3fwrn5_fw_cmd_enter_updatemode args; + struct sk_buff *msg, *rsp = NULL; + struct s3fwrn5_fw_header *hdr; + int ret; + + /* Send ENTER_UPDATE_MODE command */ + + args.hashcode_size = hash_size; + args.signature_size = sig_size; + + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_CMD, + S3FWRN5_FW_CMD_ENTER_UPDATE_MODE, &args, sizeof(args)); + if (ret < 0) + return ret; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + return ret; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) { + ret = -EPROTO; + goto out; + } + + kfree_skb(rsp); + + /* Send hashcode data */ + + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_DATA, 0, + hash_data, hash_size); + if (ret < 0) + return ret; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + return ret; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) { + ret = -EPROTO; + goto out; + } + + kfree_skb(rsp); + + /* Send signature data */ + + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_DATA, 0, + sig_data, sig_size); + if (ret < 0) + return ret; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + return ret; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) + ret = -EPROTO; + +out: + kfree_skb(rsp); + return ret; +} + +static int s3fwrn5_fw_update_sector(struct s3fwrn5_fw_info *fw_info, + u32 base_addr, const void *data) +{ + struct s3fwrn5_fw_cmd_update_sector args; + struct sk_buff *msg, *rsp = NULL; + struct s3fwrn5_fw_header *hdr; + int ret, i; + + /* Send UPDATE_SECTOR command */ + + args.base_address = base_addr; + + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_CMD, + S3FWRN5_FW_CMD_UPDATE_SECTOR, &args, sizeof(args)); + if (ret < 0) + return ret; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + return ret; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) { + ret = -EPROTO; + goto err; + } + + kfree_skb(rsp); + + /* Send data split into 256-byte packets */ + + for (i = 0; i < 16; ++i) { + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, + S3FWRN5_FW_MSG_DATA, 0, data+256*i, 256); + if (ret < 0) + break; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + break; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) { + ret = -EPROTO; + goto err; + } + + kfree_skb(rsp); + } + + return ret; + +err: + kfree_skb(rsp); + return ret; +} + +static int s3fwrn5_fw_complete_update_mode(struct s3fwrn5_fw_info *fw_info) +{ + struct sk_buff *msg, *rsp = NULL; + struct s3fwrn5_fw_header *hdr; + int ret; + + /* Send COMPLETE_UPDATE_MODE command */ + + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_CMD, + S3FWRN5_FW_CMD_COMPLETE_UPDATE_MODE, NULL, 0); + if (ret < 0) + return ret; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + return ret; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) + ret = -EPROTO; + + kfree_skb(rsp); + + return ret; +} + +/* + * Firmware header stucture: + * + * 0x00 - 0x0B : Date and time string (w/o NUL termination) + * 0x10 - 0x13 : Firmware version + * 0x14 - 0x17 : Signature address + * 0x18 - 0x1B : Signature size + * 0x1C - 0x1F : Firmware image address + * 0x20 - 0x23 : Firmware sectors count + * 0x24 - 0x27 : Custom signature address + * 0x28 - 0x2B : Custom signature size + */ + +#define S3FWRN5_FW_IMAGE_HEADER_SIZE 44 + +static int s3fwrn5_fw_request_firmware(struct s3fwrn5_fw_info *fw_info) +{ + struct s3fwrn5_fw_image *fw = &fw_info->fw; + u32 sig_off; + u32 image_off; + u32 custom_sig_off; + int ret; + + ret = request_firmware(&fw->fw, fw_info->fw_name, + &fw_info->ndev->nfc_dev->dev); + if (ret < 0) + return ret; + + if (fw->fw->size < S3FWRN5_FW_IMAGE_HEADER_SIZE) + return -EINVAL; + + memcpy(fw->date, fw->fw->data + 0x00, 12); + fw->date[12] = '\0'; + + memcpy(&fw->version, fw->fw->data + 0x10, 4); + + memcpy(&sig_off, fw->fw->data + 0x14, 4); + fw->sig = fw->fw->data + sig_off; + memcpy(&fw->sig_size, fw->fw->data + 0x18, 4); + + memcpy(&image_off, fw->fw->data + 0x1C, 4); + fw->image = fw->fw->data + image_off; + memcpy(&fw->image_sectors, fw->fw->data + 0x20, 4); + + memcpy(&custom_sig_off, fw->fw->data + 0x24, 4); + fw->custom_sig = fw->fw->data + custom_sig_off; + memcpy(&fw->custom_sig_size, fw->fw->data + 0x28, 4); + + return 0; +} + +static void s3fwrn5_fw_release_firmware(struct s3fwrn5_fw_info *fw_info) +{ + release_firmware(fw_info->fw.fw); +} + +static int s3fwrn5_fw_get_base_addr( + struct s3fwrn5_fw_cmd_get_bootinfo_rsp *bootinfo, u32 *base_addr) +{ + int i; + struct { + u8 version[4]; + u32 base_addr; + } match[] = { + {{0x05, 0x00, 0x00, 0x00}, 0x00005000}, + {{0x05, 0x00, 0x00, 0x01}, 0x00003000}, + {{0x05, 0x00, 0x00, 0x02}, 0x00003000}, + {{0x05, 0x00, 0x00, 0x03}, 0x00003000}, + {{0x05, 0x00, 0x00, 0x05}, 0x00003000} + }; + + for (i = 0; i < ARRAY_SIZE(match); ++i) + if (bootinfo->hw_version[0] == match[i].version[0] && + bootinfo->hw_version[1] == match[i].version[1] && + bootinfo->hw_version[3] == match[i].version[3]) { + *base_addr = match[i].base_addr; + return 0; + } + + return -EINVAL; +} + +static inline bool +s3fwrn5_fw_is_custom(struct s3fwrn5_fw_cmd_get_bootinfo_rsp *bootinfo) +{ + return !!bootinfo->hw_version[2]; +} + +int s3fwrn5_fw_setup(struct s3fwrn5_fw_info *fw_info) +{ + struct s3fwrn5_fw_cmd_get_bootinfo_rsp bootinfo; + int ret; + + /* Get firmware data */ + + ret = s3fwrn5_fw_request_firmware(fw_info); + if (ret < 0) { + dev_err(&fw_info->ndev->nfc_dev->dev, + "Failed to get fw file, ret=%02x\n", ret); + return ret; + } + + /* Get bootloader info */ + + ret = s3fwrn5_fw_get_bootinfo(fw_info, &bootinfo); + if (ret < 0) { + dev_err(&fw_info->ndev->nfc_dev->dev, + "Failed to get bootinfo, ret=%02x\n", ret); + goto err; + } + + /* Match hardware version to obtain firmware base address */ + + ret = s3fwrn5_fw_get_base_addr(&bootinfo, &fw_info->base_addr); + if (ret < 0) { + dev_err(&fw_info->ndev->nfc_dev->dev, + "Unknown hardware version\n"); + goto err; + } + + fw_info->sector_size = bootinfo.sector_size; + + fw_info->sig_size = s3fwrn5_fw_is_custom(&bootinfo) ? + fw_info->fw.custom_sig_size : fw_info->fw.sig_size; + fw_info->sig = s3fwrn5_fw_is_custom(&bootinfo) ? + fw_info->fw.custom_sig : fw_info->fw.sig; + + return 0; + +err: + s3fwrn5_fw_release_firmware(fw_info); + return ret; +} + +bool s3fwrn5_fw_check_version(struct s3fwrn5_fw_info *fw_info, u32 version) +{ + struct s3fwrn5_fw_version *new = (void *) &fw_info->fw.version; + struct s3fwrn5_fw_version *old = (void *) &version; + + if (new->major > old->major) + return true; + if (new->build1 > old->build1) + return true; + if (new->build2 > old->build2) + return true; + + return false; +} + +int s3fwrn5_fw_download(struct s3fwrn5_fw_info *fw_info) +{ + struct s3fwrn5_fw_image *fw = &fw_info->fw; + u8 hash_data[SHA1_DIGEST_SIZE]; + struct crypto_shash *tfm; + u32 image_size, off; + int ret; + + image_size = fw_info->sector_size * fw->image_sectors; + + /* Compute SHA of firmware data */ + + tfm = crypto_alloc_shash("sha1", 0, 0); + if (IS_ERR(tfm)) { + ret = PTR_ERR(tfm); + dev_err(&fw_info->ndev->nfc_dev->dev, + "Cannot allocate shash (code=%d)\n", ret); + goto out; + } + + { + SHASH_DESC_ON_STACK(desc, tfm); + + desc->tfm = tfm; + desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP; + + ret = crypto_shash_digest(desc, fw->image, image_size, + hash_data); + shash_desc_zero(desc); + } + + crypto_free_shash(tfm); + if (ret) { + dev_err(&fw_info->ndev->nfc_dev->dev, + "Cannot compute hash (code=%d)\n", ret); + goto out; + } + + /* Firmware update process */ + + dev_info(&fw_info->ndev->nfc_dev->dev, + "Firmware update: %s\n", fw_info->fw_name); + + ret = s3fwrn5_fw_enter_update_mode(fw_info, hash_data, + SHA1_DIGEST_SIZE, fw_info->sig, fw_info->sig_size); + if (ret < 0) { + dev_err(&fw_info->ndev->nfc_dev->dev, + "Unable to enter update mode\n"); + goto out; + } + + for (off = 0; off < image_size; off += fw_info->sector_size) { + ret = s3fwrn5_fw_update_sector(fw_info, + fw_info->base_addr + off, fw->image + off); + if (ret < 0) { + dev_err(&fw_info->ndev->nfc_dev->dev, + "Firmware update error (code=%d)\n", ret); + goto out; + } + } + + ret = s3fwrn5_fw_complete_update_mode(fw_info); + if (ret < 0) { + dev_err(&fw_info->ndev->nfc_dev->dev, + "Unable to complete update mode\n"); + goto out; + } + + dev_info(&fw_info->ndev->nfc_dev->dev, + "Firmware update: success\n"); + +out: + return ret; +} + +void s3fwrn5_fw_init(struct s3fwrn5_fw_info *fw_info, const char *fw_name) +{ + fw_info->parity = 0x00; + fw_info->rsp = NULL; + fw_info->fw.fw = NULL; + strcpy(fw_info->fw_name, fw_name); + init_completion(&fw_info->completion); +} + +void s3fwrn5_fw_cleanup(struct s3fwrn5_fw_info *fw_info) +{ + s3fwrn5_fw_release_firmware(fw_info); +} + +int s3fwrn5_fw_recv_frame(struct nci_dev *ndev, struct sk_buff *skb) +{ + struct s3fwrn5_info *info = nci_get_drvdata(ndev); + struct s3fwrn5_fw_info *fw_info = &info->fw_info; + + BUG_ON(fw_info->rsp); + + fw_info->rsp = skb; + + complete(&fw_info->completion); + + return 0; +} diff --git a/drivers/nfc/s3fwrn5/firmware.h b/drivers/nfc/s3fwrn5/firmware.h new file mode 100644 index 0000000..1ec0647 --- /dev/null +++ b/drivers/nfc/s3fwrn5/firmware.h @@ -0,0 +1,111 @@ +/* + * NCI based driver for Samsung S3FWRN5 NFC chip + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LOCAL_S3FWRN5_FIRMWARE_H_ +#define __LOCAL_S3FWRN5_FIRMWARE_H_ + +/* FW Message Types */ +#define S3FWRN5_FW_MSG_CMD 0x00 +#define S3FWRN5_FW_MSG_RSP 0x01 +#define S3FWRN5_FW_MSG_DATA 0x02 + +/* FW Return Codes */ +#define S3FWRN5_FW_RET_SUCCESS 0x00 +#define S3FWRN5_FW_RET_MESSAGE_TYPE_INVALID 0x01 +#define S3FWRN5_FW_RET_COMMAND_INVALID 0x02 +#define S3FWRN5_FW_RET_PAGE_DATA_OVERFLOW 0x03 +#define S3FWRN5_FW_RET_SECT_DATA_OVERFLOW 0x04 +#define S3FWRN5_FW_RET_AUTHENTICATION_FAIL 0x05 +#define S3FWRN5_FW_RET_FLASH_OPERATION_FAIL 0x06 +#define S3FWRN5_FW_RET_ADDRESS_OUT_OF_RANGE 0x07 +#define S3FWRN5_FW_RET_PARAMETER_INVALID 0x08 + +/* ---- FW Packet structures ---- */ +#define S3FWRN5_FW_HDR_SIZE 4 + +struct s3fwrn5_fw_header { + __u8 type; + __u8 code; + __u16 len; +}; + +#define S3FWRN5_FW_CMD_RESET 0x00 + +#define S3FWRN5_FW_CMD_GET_BOOTINFO 0x01 + +struct s3fwrn5_fw_cmd_get_bootinfo_rsp { + __u8 hw_version[4]; + __u16 sector_size; + __u16 page_size; + __u16 frame_max_size; + __u16 hw_buffer_size; +}; + +#define S3FWRN5_FW_CMD_ENTER_UPDATE_MODE 0x02 + +struct s3fwrn5_fw_cmd_enter_updatemode { + __u16 hashcode_size; + __u16 signature_size; +}; + +#define S3FWRN5_FW_CMD_UPDATE_SECTOR 0x04 + +struct s3fwrn5_fw_cmd_update_sector { + __u32 base_address; +}; + +#define S3FWRN5_FW_CMD_COMPLETE_UPDATE_MODE 0x05 + +struct s3fwrn5_fw_image { + const struct firmware *fw; + + char date[13]; + u32 version; + const void *sig; + u32 sig_size; + const void *image; + u32 image_sectors; + const void *custom_sig; + u32 custom_sig_size; +}; + +struct s3fwrn5_fw_info { + struct nci_dev *ndev; + struct s3fwrn5_fw_image fw; + char fw_name[NFC_FIRMWARE_NAME_MAXSIZE + 1]; + + const void *sig; + u32 sig_size; + u32 sector_size; + u32 base_addr; + + struct completion completion; + struct sk_buff *rsp; + char parity; +}; + +void s3fwrn5_fw_init(struct s3fwrn5_fw_info *fw_info, const char *fw_name); +int s3fwrn5_fw_setup(struct s3fwrn5_fw_info *fw_info); +bool s3fwrn5_fw_check_version(struct s3fwrn5_fw_info *fw_info, u32 version); +int s3fwrn5_fw_download(struct s3fwrn5_fw_info *fw_info); +void s3fwrn5_fw_cleanup(struct s3fwrn5_fw_info *fw_info); + +int s3fwrn5_fw_recv_frame(struct nci_dev *ndev, struct sk_buff *skb); + +#endif /* __LOCAL_S3FWRN5_FIRMWARE_H_ */ diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c new file mode 100644 index 0000000..3ed0adf --- /dev/null +++ b/drivers/nfc/s3fwrn5/i2c.c @@ -0,0 +1,306 @@ +/* + * I2C Link Layer for Samsung S3FWRN5 NCI based Driver + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/of_gpio.h> +#include <linux/of_irq.h> +#include <linux/module.h> + +#include <net/nfc/nfc.h> + +#include "s3fwrn5.h" + +#define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c" + +#define S3FWRN5_I2C_MAX_PAYLOAD 32 +#define S3FWRN5_EN_WAIT_TIME 150 + +struct s3fwrn5_i2c_phy { + struct i2c_client *i2c_dev; + struct nci_dev *ndev; + + unsigned int gpio_en; + unsigned int gpio_fw_wake; + + struct mutex mutex; + + enum s3fwrn5_mode mode; + unsigned int irq_skip:1; +}; + +static void s3fwrn5_i2c_set_wake(void *phy_id, bool wake) +{ + struct s3fwrn5_i2c_phy *phy = phy_id; + + mutex_lock(&phy->mutex); + gpio_set_value(phy->gpio_fw_wake, wake); + msleep(S3FWRN5_EN_WAIT_TIME/2); + mutex_unlock(&phy->mutex); +} + +static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode) +{ + struct s3fwrn5_i2c_phy *phy = phy_id; + + mutex_lock(&phy->mutex); + + if (phy->mode == mode) + goto out; + + phy->mode = mode; + + gpio_set_value(phy->gpio_en, 1); + gpio_set_value(phy->gpio_fw_wake, 0); + if (mode == S3FWRN5_MODE_FW) + gpio_set_value(phy->gpio_fw_wake, 1); + + if (mode != S3FWRN5_MODE_COLD) { + msleep(S3FWRN5_EN_WAIT_TIME); + gpio_set_value(phy->gpio_en, 0); + msleep(S3FWRN5_EN_WAIT_TIME/2); + } + + phy->irq_skip = true; + +out: + mutex_unlock(&phy->mutex); +} + +static enum s3fwrn5_mode s3fwrn5_i2c_get_mode(void *phy_id) +{ + struct s3fwrn5_i2c_phy *phy = phy_id; + enum s3fwrn5_mode mode; + + mutex_lock(&phy->mutex); + + mode = phy->mode; + + mutex_unlock(&phy->mutex); + + return mode; +} + +static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb) +{ + struct s3fwrn5_i2c_phy *phy = phy_id; + int ret; + + mutex_lock(&phy->mutex); + + phy->irq_skip = false; + + ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len); + if (ret == -EREMOTEIO) { + /* Retry, chip was in standby */ + usleep_range(110000, 120000); + ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len); + } + + mutex_unlock(&phy->mutex); + + if (ret < 0) + return ret; + + if (ret != skb->len) + return -EREMOTEIO; + + return 0; +} + +static const struct s3fwrn5_phy_ops i2c_phy_ops = { + .set_wake = s3fwrn5_i2c_set_wake, + .set_mode = s3fwrn5_i2c_set_mode, + .get_mode = s3fwrn5_i2c_get_mode, + .write = s3fwrn5_i2c_write, +}; + +static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy) +{ + struct sk_buff *skb; + size_t hdr_size; + size_t data_len; + char hdr[4]; + int ret; + + hdr_size = (phy->mode == S3FWRN5_MODE_NCI) ? + NCI_CTRL_HDR_SIZE : S3FWRN5_FW_HDR_SIZE; + ret = i2c_master_recv(phy->i2c_dev, hdr, hdr_size); + if (ret < 0) + return ret; + + if (ret < hdr_size) + return -EBADMSG; + + data_len = (phy->mode == S3FWRN5_MODE_NCI) ? + ((struct nci_ctrl_hdr *)hdr)->plen : + ((struct s3fwrn5_fw_header *)hdr)->len; + + skb = alloc_skb(hdr_size + data_len, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + memcpy(skb_put(skb, hdr_size), hdr, hdr_size); + + if (data_len == 0) + goto out; + + ret = i2c_master_recv(phy->i2c_dev, skb_put(skb, data_len), data_len); + if (ret != data_len) { + kfree_skb(skb); + return -EBADMSG; + } + +out: + return s3fwrn5_recv_frame(phy->ndev, skb, phy->mode); +} + +static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id) +{ + struct s3fwrn5_i2c_phy *phy = phy_id; + int ret = 0; + + if (!phy || !phy->ndev) { + WARN_ON_ONCE(1); + return IRQ_NONE; + } + + mutex_lock(&phy->mutex); + + if (phy->irq_skip) + goto out; + + switch (phy->mode) { + case S3FWRN5_MODE_NCI: + case S3FWRN5_MODE_FW: + ret = s3fwrn5_i2c_read(phy); + break; + case S3FWRN5_MODE_COLD: + ret = -EREMOTEIO; + break; + } + +out: + mutex_unlock(&phy->mutex); + + return IRQ_HANDLED; +} + +static int s3fwrn5_i2c_parse_dt(struct i2c_client *client) +{ + struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client); + struct device_node *np = client->dev.of_node; + + if (!np) + return -ENODEV; + + phy->gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0); + if (!gpio_is_valid(phy->gpio_en)) + return -ENODEV; + + phy->gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0); + if (!gpio_is_valid(phy->gpio_fw_wake)) + return -ENODEV; + + return 0; +} + +static int s3fwrn5_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct s3fwrn5_i2c_phy *phy; + int ret; + + phy = devm_kzalloc(&client->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + mutex_init(&phy->mutex); + phy->mode = S3FWRN5_MODE_COLD; + phy->irq_skip = true; + + phy->i2c_dev = client; + i2c_set_clientdata(client, phy); + + ret = s3fwrn5_i2c_parse_dt(client); + if (ret < 0) + return ret; + + ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en, + GPIOF_OUT_INIT_HIGH, "s3fwrn5_en"); + if (ret < 0) + return ret; + + ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw_wake, + GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake"); + if (ret < 0) + return ret; + + ret = s3fwrn5_probe(&phy->ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops, + S3FWRN5_I2C_MAX_PAYLOAD); + if (ret < 0) + return ret; + + ret = devm_request_threaded_irq(&client->dev, phy->i2c_dev->irq, NULL, + s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + S3FWRN5_I2C_DRIVER_NAME, phy); + if (ret) + s3fwrn5_remove(phy->ndev); + + return ret; +} + +static int s3fwrn5_i2c_remove(struct i2c_client *client) +{ + struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client); + + s3fwrn5_remove(phy->ndev); + + return 0; +} + +static struct i2c_device_id s3fwrn5_i2c_id_table[] = { + {S3FWRN5_I2C_DRIVER_NAME, 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, s3fwrn5_i2c_id_table); + +static const struct of_device_id of_s3fwrn5_i2c_match[] = { + { .compatible = "samsung,s3fwrn5-i2c", }, + {} +}; +MODULE_DEVICE_TABLE(of, of_s3fwrn5_i2c_match); + +static struct i2c_driver s3fwrn5_i2c_driver = { + .driver = { + .owner = THIS_MODULE, + .name = S3FWRN5_I2C_DRIVER_NAME, + .of_match_table = of_match_ptr(of_s3fwrn5_i2c_match), + }, + .probe = s3fwrn5_i2c_probe, + .remove = s3fwrn5_i2c_remove, + .id_table = s3fwrn5_i2c_id_table, +}; + +module_i2c_driver(s3fwrn5_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("I2C driver for Samsung S3FWRN5"); +MODULE_AUTHOR("Robert Baldyga <r.baldyga@samsung.com>"); diff --git a/drivers/nfc/s3fwrn5/nci.c b/drivers/nfc/s3fwrn5/nci.c new file mode 100644 index 0000000..075e4e8 --- /dev/null +++ b/drivers/nfc/s3fwrn5/nci.c @@ -0,0 +1,165 @@ +/* + * NCI based driver for Samsung S3FWRN5 NFC chip + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/completion.h> +#include <linux/firmware.h> + +#include "s3fwrn5.h" +#include "nci.h" + +static int s3fwrn5_nci_prop_rsp(struct nci_dev *ndev, struct sk_buff *skb) +{ + __u8 status = skb->data[0]; + + nci_req_complete(ndev, status); + return 0; +} + +static struct nci_driver_ops s3fwrn5_nci_prop_ops[] = { + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + NCI_PROP_AGAIN), + .rsp = s3fwrn5_nci_prop_rsp, + }, + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + NCI_PROP_GET_RFREG), + .rsp = s3fwrn5_nci_prop_rsp, + }, + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + NCI_PROP_SET_RFREG), + .rsp = s3fwrn5_nci_prop_rsp, + }, + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + NCI_PROP_GET_RFREG_VER), + .rsp = s3fwrn5_nci_prop_rsp, + }, + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + NCI_PROP_SET_RFREG_VER), + .rsp = s3fwrn5_nci_prop_rsp, + }, + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + NCI_PROP_START_RFREG), + .rsp = s3fwrn5_nci_prop_rsp, + }, + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + NCI_PROP_STOP_RFREG), + .rsp = s3fwrn5_nci_prop_rsp, + }, + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + NCI_PROP_FW_CFG), + .rsp = s3fwrn5_nci_prop_rsp, + }, + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + NCI_PROP_WR_RESET), + .rsp = s3fwrn5_nci_prop_rsp, + }, +}; + +void s3fwrn5_nci_get_prop_ops(struct nci_driver_ops **ops, size_t *n) +{ + *ops = s3fwrn5_nci_prop_ops; + *n = ARRAY_SIZE(s3fwrn5_nci_prop_ops); +} + +#define S3FWRN5_RFREG_SECTION_SIZE 252 + +int s3fwrn5_nci_rf_configure(struct s3fwrn5_info *info, const char *fw_name) +{ + const struct firmware *fw; + struct nci_prop_fw_cfg_cmd fw_cfg; + struct nci_prop_set_rfreg_cmd set_rfreg; + struct nci_prop_stop_rfreg_cmd stop_rfreg; + u32 checksum; + int i, len; + int ret; + + ret = request_firmware(&fw, fw_name, &info->ndev->nfc_dev->dev); + if (ret < 0) + return ret; + + /* Compute rfreg checksum */ + + checksum = 0; + for (i = 0; i < fw->size; i += 4) + checksum += *((u32 *)(fw->data+i)); + + /* Set default clock configuration for external crystal */ + + fw_cfg.clk_type = 0x01; + fw_cfg.clk_speed = 0xff; + fw_cfg.clk_req = 0xff; + ret = nci_prop_cmd(info->ndev, NCI_PROP_FW_CFG, + sizeof(fw_cfg), (__u8 *)&fw_cfg); + if (ret < 0) + goto out; + + /* Start rfreg configuration */ + + dev_info(&info->ndev->nfc_dev->dev, + "rfreg configuration update: %s\n", fw_name); + + ret = nci_prop_cmd(info->ndev, NCI_PROP_START_RFREG, 0, NULL); + if (ret < 0) { + dev_err(&info->ndev->nfc_dev->dev, + "Unable to start rfreg update\n"); + goto out; + } + + /* Update rfreg */ + + set_rfreg.index = 0; + for (i = 0; i < fw->size; i += S3FWRN5_RFREG_SECTION_SIZE) { + len = (fw->size - i < S3FWRN5_RFREG_SECTION_SIZE) ? + (fw->size - i) : S3FWRN5_RFREG_SECTION_SIZE; + memcpy(set_rfreg.data, fw->data+i, len); + ret = nci_prop_cmd(info->ndev, NCI_PROP_SET_RFREG, + len+1, (__u8 *)&set_rfreg); + if (ret < 0) { + dev_err(&info->ndev->nfc_dev->dev, + "rfreg update error (code=%d)\n", ret); + goto out; + } + set_rfreg.index++; + } + + /* Finish rfreg configuration */ + + stop_rfreg.checksum = checksum & 0xffff; + ret = nci_prop_cmd(info->ndev, NCI_PROP_STOP_RFREG, + sizeof(stop_rfreg), (__u8 *)&stop_rfreg); + if (ret < 0) { + dev_err(&info->ndev->nfc_dev->dev, + "Unable to stop rfreg update\n"); + goto out; + } + + dev_info(&info->ndev->nfc_dev->dev, + "rfreg configuration update: success\n"); +out: + release_firmware(fw); + return ret; +} diff --git a/drivers/nfc/s3fwrn5/nci.h b/drivers/nfc/s3fwrn5/nci.h new file mode 100644 index 0000000..60c7fb5 --- /dev/null +++ b/drivers/nfc/s3fwrn5/nci.h @@ -0,0 +1,89 @@ +/* + * NCI based driver for Samsung S3FWRN5 NFC chip + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LOCAL_S3FWRN5_NCI_H_ +#define __LOCAL_S3FWRN5_NCI_H_ + +#include "s3fwrn5.h" + +#define NCI_PROP_AGAIN 0x01 + +#define NCI_PROP_GET_RFREG 0x21 +#define NCI_PROP_SET_RFREG 0x22 + +struct nci_prop_set_rfreg_cmd { + __u8 index; + __u8 data[252]; +}; + +struct nci_prop_set_rfreg_rsp { + __u8 status; +}; + +#define NCI_PROP_GET_RFREG_VER 0x24 + +struct nci_prop_get_rfreg_ver_rsp { + __u8 status; + __u8 data[8]; +}; + +#define NCI_PROP_SET_RFREG_VER 0x25 + +struct nci_prop_set_rfreg_ver_cmd { + __u8 data[8]; +}; + +struct nci_prop_set_rfreg_ver_rsp { + __u8 status; +}; + +#define NCI_PROP_START_RFREG 0x26 + +struct nci_prop_start_rfreg_rsp { + __u8 status; +}; + +#define NCI_PROP_STOP_RFREG 0x27 + +struct nci_prop_stop_rfreg_cmd { + __u16 checksum; +}; + +struct nci_prop_stop_rfreg_rsp { + __u8 status; +}; + +#define NCI_PROP_FW_CFG 0x28 + +struct nci_prop_fw_cfg_cmd { + __u8 clk_type; + __u8 clk_speed; + __u8 clk_req; +}; + +struct nci_prop_fw_cfg_rsp { + __u8 status; +}; + +#define NCI_PROP_WR_RESET 0x2f + +void s3fwrn5_nci_get_prop_ops(struct nci_driver_ops **ops, size_t *n); +int s3fwrn5_nci_rf_configure(struct s3fwrn5_info *info, const char *fw_name); + +#endif /* __LOCAL_S3FWRN5_NCI_H_ */ diff --git a/drivers/nfc/s3fwrn5/s3fwrn5.h b/drivers/nfc/s3fwrn5/s3fwrn5.h new file mode 100644 index 0000000..7d5e516 --- /dev/null +++ b/drivers/nfc/s3fwrn5/s3fwrn5.h @@ -0,0 +1,99 @@ +/* + * NCI based driver for Samsung S3FWRN5 NFC chip + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LOCAL_S3FWRN5_H_ +#define __LOCAL_S3FWRN5_H_ + +#include <linux/nfc.h> + +#include <net/nfc/nci_core.h> + +#include "firmware.h" + +enum s3fwrn5_mode { + S3FWRN5_MODE_COLD, + S3FWRN5_MODE_NCI, + S3FWRN5_MODE_FW, +}; + +struct s3fwrn5_phy_ops { + void (*set_wake)(void *id, bool sleep); + void (*set_mode)(void *id, enum s3fwrn5_mode); + enum s3fwrn5_mode (*get_mode)(void *id); + int (*write)(void *id, struct sk_buff *skb); +}; + +struct s3fwrn5_info { + struct nci_dev *ndev; + void *phy_id; + struct device *pdev; + + const struct s3fwrn5_phy_ops *phy_ops; + unsigned int max_payload; + + struct s3fwrn5_fw_info fw_info; + + struct mutex mutex; +}; + +static inline int s3fwrn5_set_mode(struct s3fwrn5_info *info, + enum s3fwrn5_mode mode) +{ + if (!info->phy_ops->set_mode) + return -ENOTSUPP; + + info->phy_ops->set_mode(info->phy_id, mode); + + return 0; +} + +static inline enum s3fwrn5_mode s3fwrn5_get_mode(struct s3fwrn5_info *info) +{ + if (!info->phy_ops->get_mode) + return -ENOTSUPP; + + return info->phy_ops->get_mode(info->phy_id); +} + +static inline int s3fwrn5_set_wake(struct s3fwrn5_info *info, bool wake) +{ + if (!info->phy_ops->set_wake) + return -ENOTSUPP; + + info->phy_ops->set_wake(info->phy_id, wake); + + return 0; +} + +static inline int s3fwrn5_write(struct s3fwrn5_info *info, struct sk_buff *skb) +{ + if (!info->phy_ops->write) + return -ENOTSUPP; + + return info->phy_ops->write(info->phy_id, skb); +} + +int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev, + const struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload); +void s3fwrn5_remove(struct nci_dev *ndev); + +int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb, + enum s3fwrn5_mode mode); + +#endif /* __LOCAL_S3FWRN5_H_ */ diff --git a/drivers/nfc/st-nci/Kconfig b/drivers/nfc/st-nci/Kconfig new file mode 100644 index 0000000..84d1da2 --- /dev/null +++ b/drivers/nfc/st-nci/Kconfig @@ -0,0 +1,35 @@ +config NFC_ST_NCI + tristate + depends on m + ---help--- + STMicroelectronics NFC NCI chips core driver. It implements the chipset + NCI logic and hooks into the NFC kernel APIs. Physical layers will + register against it. + +config NFC_ST_NCI_I2C + depends on !KERNEL_3_18 + tristate "STMicroelectronics ST NCI NFC driver (I2C)" + depends on m + depends on NFC_NCI && I2C + select NFC_ST_NCI + ---help--- + This module adds support for an I2C interface to the + STMicroelectronics NFC NCI chips familly. + Select this if your platform is using the i2c bus. + + If you choose to build a module, it'll be called st-nci_i2c. + Say N if unsure. + +config NFC_ST_NCI_SPI + depends on !KERNEL_3_18 + tristate "STMicroelectronics ST NCI NFC driver (SPI)" + depends on m + depends on NFC_NCI && SPI + select NFC_ST_NCI + ---help--- + This module adds support for an SPI interface to the + STMicroelectronics NFC NCI chips familly. + Select this if your platform is using the spi bus. + + If you choose to build a module, it'll be called st-nci_spi. + Say N if unsure. diff --git a/drivers/nfc/st-nci/Makefile b/drivers/nfc/st-nci/Makefile new file mode 100644 index 0000000..c354d64 --- /dev/null +++ b/drivers/nfc/st-nci/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for ST_NCI NCI based NFC driver +# + +st-nci-objs = ndlc.o core.o se.o vendor_cmds.o +obj-$(CPTCFG_NFC_ST_NCI) += st-nci.o + +st-nci_i2c-objs = i2c.o +obj-$(CPTCFG_NFC_ST_NCI_I2C) += st-nci_i2c.o + +st-nci_spi-objs = spi.o +obj-$(CPTCFG_NFC_ST_NCI_SPI) += st-nci_spi.o diff --git a/drivers/nfc/st-nci/core.c b/drivers/nfc/st-nci/core.c new file mode 100644 index 0000000..c693128 --- /dev/null +++ b/drivers/nfc/st-nci/core.c @@ -0,0 +1,187 @@ +/* + * NCI based Driver for STMicroelectronics NFC Chip + * + * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/nfc.h> +#include <net/nfc/nci.h> +#include <net/nfc/nci_core.h> +#include <linux/gpio.h> +#include <linux/delay.h> + +#include "st-nci.h" + +#define DRIVER_DESC "NCI NFC driver for ST_NCI" + +#define ST_NCI1_X_PROPRIETARY_ISO15693 0x83 + +static int st_nci_init(struct nci_dev *ndev) +{ + struct nci_mode_set_cmd cmd; + + cmd.cmd_type = ST_NCI_SET_NFC_MODE; + cmd.mode = 1; + + return nci_prop_cmd(ndev, ST_NCI_CORE_PROP, + sizeof(struct nci_mode_set_cmd), (__u8 *)&cmd); +} + +static int st_nci_open(struct nci_dev *ndev) +{ + struct st_nci_info *info = nci_get_drvdata(ndev); + int r; + + if (test_and_set_bit(ST_NCI_RUNNING, &info->flags)) + return 0; + + r = ndlc_open(info->ndlc); + if (r) + clear_bit(ST_NCI_RUNNING, &info->flags); + + return r; +} + +static int st_nci_close(struct nci_dev *ndev) +{ + struct st_nci_info *info = nci_get_drvdata(ndev); + + if (!test_bit(ST_NCI_RUNNING, &info->flags)) + return 0; + + ndlc_close(info->ndlc); + + clear_bit(ST_NCI_RUNNING, &info->flags); + + return 0; +} + +static int st_nci_send(struct nci_dev *ndev, struct sk_buff *skb) +{ + struct st_nci_info *info = nci_get_drvdata(ndev); + + skb->dev = (void *)ndev; + + if (!test_bit(ST_NCI_RUNNING, &info->flags)) + return -EBUSY; + + return ndlc_send(info->ndlc, skb); +} + +static __u32 st_nci_get_rfprotocol(struct nci_dev *ndev, + __u8 rf_protocol) +{ + return rf_protocol == ST_NCI1_X_PROPRIETARY_ISO15693 ? + NFC_PROTO_ISO15693_MASK : 0; +} + +static int st_nci_prop_rsp_packet(struct nci_dev *ndev, + struct sk_buff *skb) +{ + __u8 status = skb->data[0]; + + nci_req_complete(ndev, status); + return 0; +} + +static struct nci_driver_ops st_nci_prop_ops[] = { + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + ST_NCI_CORE_PROP), + .rsp = st_nci_prop_rsp_packet, + }, +}; + +static struct nci_ops st_nci_ops = { + .init = st_nci_init, + .open = st_nci_open, + .close = st_nci_close, + .send = st_nci_send, + .get_rfprotocol = st_nci_get_rfprotocol, + .discover_se = st_nci_discover_se, + .enable_se = st_nci_enable_se, + .disable_se = st_nci_disable_se, + .se_io = st_nci_se_io, + .hci_load_session = st_nci_hci_load_session, + .hci_event_received = st_nci_hci_event_received, + .hci_cmd_received = st_nci_hci_cmd_received, + .prop_ops = st_nci_prop_ops, + .n_prop_ops = ARRAY_SIZE(st_nci_prop_ops), +}; + +int st_nci_probe(struct llt_ndlc *ndlc, int phy_headroom, + int phy_tailroom, struct st_nci_se_status *se_status) +{ + struct st_nci_info *info; + int r; + u32 protocols; + + info = devm_kzalloc(ndlc->dev, + sizeof(struct st_nci_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + protocols = NFC_PROTO_JEWEL_MASK + | NFC_PROTO_MIFARE_MASK + | NFC_PROTO_FELICA_MASK + | NFC_PROTO_ISO14443_MASK + | NFC_PROTO_ISO14443_B_MASK + | NFC_PROTO_ISO15693_MASK + | NFC_PROTO_NFC_DEP_MASK; + + ndlc->ndev = nci_allocate_device(&st_nci_ops, protocols, + phy_headroom, phy_tailroom); + if (!ndlc->ndev) { + pr_err("Cannot allocate nfc ndev\n"); + return -ENOMEM; + } + info->ndlc = ndlc; + + nci_set_drvdata(ndlc->ndev, info); + + r = st_nci_vendor_cmds_init(ndlc->ndev); + if (r) { + pr_err("Cannot register proprietary vendor cmds\n"); + goto err_reg_dev; + } + + r = nci_register_device(ndlc->ndev); + if (r) { + pr_err("Cannot register nfc device to nci core\n"); + goto err_reg_dev; + } + + return st_nci_se_init(ndlc->ndev, se_status); + +err_reg_dev: + nci_free_device(ndlc->ndev); + return r; +} +EXPORT_SYMBOL_GPL(st_nci_probe); + +void st_nci_remove(struct nci_dev *ndev) +{ + struct st_nci_info *info = nci_get_drvdata(ndev); + + ndlc_close(info->ndlc); + + nci_unregister_device(ndev); + nci_free_device(ndev); +} +EXPORT_SYMBOL_GPL(st_nci_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/st-nci/i2c.c b/drivers/nfc/st-nci/i2c.c new file mode 100644 index 0000000..9dfae0e --- /dev/null +++ b/drivers/nfc/st-nci/i2c.c @@ -0,0 +1,428 @@ +/* + * I2C Link Layer for ST NCI NFC controller familly based Driver + * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <linux/acpi.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/nfc.h> +#include <linux/platform_data/st-nci.h> + +#include "st-nci.h" + +#define DRIVER_DESC "NCI NFC driver for ST_NCI" + +/* ndlc header */ +#define ST_NCI_FRAME_HEADROOM 1 +#define ST_NCI_FRAME_TAILROOM 0 + +#define ST_NCI_I2C_MIN_SIZE 4 /* PCB(1) + NCI Packet header(3) */ +#define ST_NCI_I2C_MAX_SIZE 250 /* req 4.2.1 */ + +#define ST_NCI_I2C_DRIVER_NAME "st_nci_i2c" + +#define ST_NCI_GPIO_NAME_RESET "reset" + +struct st_nci_i2c_phy { + struct i2c_client *i2c_dev; + struct llt_ndlc *ndlc; + + bool irq_active; + + unsigned int gpio_reset; + unsigned int irq_polarity; + + struct st_nci_se_status se_status; +}; + +static int st_nci_i2c_enable(void *phy_id) +{ + struct st_nci_i2c_phy *phy = phy_id; + + gpio_set_value(phy->gpio_reset, 0); + usleep_range(10000, 15000); + gpio_set_value(phy->gpio_reset, 1); + usleep_range(80000, 85000); + + if (phy->ndlc->powered == 0 && phy->irq_active == 0) { + enable_irq(phy->i2c_dev->irq); + phy->irq_active = true; + } + + return 0; +} + +static void st_nci_i2c_disable(void *phy_id) +{ + struct st_nci_i2c_phy *phy = phy_id; + + disable_irq_nosync(phy->i2c_dev->irq); + phy->irq_active = false; +} + +/* + * Writing a frame must not return the number of written bytes. + * It must return either zero for success, or <0 for error. + * In addition, it must not alter the skb + */ +static int st_nci_i2c_write(void *phy_id, struct sk_buff *skb) +{ + int r = -1; + struct st_nci_i2c_phy *phy = phy_id; + struct i2c_client *client = phy->i2c_dev; + + if (phy->ndlc->hard_fault != 0) + return phy->ndlc->hard_fault; + + r = i2c_master_send(client, skb->data, skb->len); + if (r < 0) { /* Retry, chip was in standby */ + usleep_range(1000, 4000); + r = i2c_master_send(client, skb->data, skb->len); + } + + if (r >= 0) { + if (r != skb->len) + r = -EREMOTEIO; + else + r = 0; + } + + return r; +} + +/* + * Reads an ndlc frame and returns it in a newly allocated sk_buff. + * returns: + * 0 : if received frame is complete + * -EREMOTEIO : i2c read error (fatal) + * -EBADMSG : frame was incorrect and discarded + * -ENOMEM : cannot allocate skb, frame dropped + */ +static int st_nci_i2c_read(struct st_nci_i2c_phy *phy, + struct sk_buff **skb) +{ + int r; + u8 len; + u8 buf[ST_NCI_I2C_MAX_SIZE]; + struct i2c_client *client = phy->i2c_dev; + + r = i2c_master_recv(client, buf, ST_NCI_I2C_MIN_SIZE); + if (r < 0) { /* Retry, chip was in standby */ + usleep_range(1000, 4000); + r = i2c_master_recv(client, buf, ST_NCI_I2C_MIN_SIZE); + } + + if (r != ST_NCI_I2C_MIN_SIZE) + return -EREMOTEIO; + + len = be16_to_cpu(*(__be16 *) (buf + 2)); + if (len > ST_NCI_I2C_MAX_SIZE) { + nfc_err(&client->dev, "invalid frame len\n"); + return -EBADMSG; + } + + *skb = alloc_skb(ST_NCI_I2C_MIN_SIZE + len, GFP_KERNEL); + if (*skb == NULL) + return -ENOMEM; + + skb_reserve(*skb, ST_NCI_I2C_MIN_SIZE); + skb_put(*skb, ST_NCI_I2C_MIN_SIZE); + memcpy((*skb)->data, buf, ST_NCI_I2C_MIN_SIZE); + + if (!len) + return 0; + + r = i2c_master_recv(client, buf, len); + if (r != len) { + kfree_skb(*skb); + return -EREMOTEIO; + } + + skb_put(*skb, len); + memcpy((*skb)->data + ST_NCI_I2C_MIN_SIZE, buf, len); + + return 0; +} + +/* + * Reads an ndlc frame from the chip. + * + * On ST_NCI, IRQ goes in idle state when read starts. + */ +static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id) +{ + struct st_nci_i2c_phy *phy = phy_id; + struct i2c_client *client; + struct sk_buff *skb = NULL; + int r; + + if (!phy || !phy->ndlc || irq != phy->i2c_dev->irq) { + WARN_ON_ONCE(1); + return IRQ_NONE; + } + + client = phy->i2c_dev; + dev_dbg(&client->dev, "IRQ\n"); + + if (phy->ndlc->hard_fault) + return IRQ_HANDLED; + + if (!phy->ndlc->powered) { + st_nci_i2c_disable(phy); + return IRQ_HANDLED; + } + + r = st_nci_i2c_read(phy, &skb); + if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG) + return IRQ_HANDLED; + + ndlc_recv(phy->ndlc, skb); + + return IRQ_HANDLED; +} + +static struct nfc_phy_ops i2c_phy_ops = { + .write = st_nci_i2c_write, + .enable = st_nci_i2c_enable, + .disable = st_nci_i2c_disable, +}; + +static int st_nci_i2c_acpi_request_resources(struct i2c_client *client) +{ + struct st_nci_i2c_phy *phy = i2c_get_clientdata(client); + struct gpio_desc *gpiod_reset; + struct device *dev = &client->dev; + u8 tmp; + + /* Get RESET GPIO from ACPI */ + gpiod_reset = devm_gpiod_get_index(dev, ST_NCI_GPIO_NAME_RESET, 1, + GPIOD_OUT_HIGH); + if (IS_ERR(gpiod_reset)) { + nfc_err(dev, "Unable to get RESET GPIO\n"); + return -ENODEV; + } + + phy->gpio_reset = desc_to_gpio(gpiod_reset); + + phy->irq_polarity = irq_get_trigger_type(client->irq); + + phy->se_status.is_ese_present = false; + phy->se_status.is_uicc_present = false; + + if (device_property_present(dev, "ese-present")) { + device_property_read_u8(dev, "ese-present", &tmp); + phy->se_status.is_ese_present = tmp; + } + + if (device_property_present(dev, "uicc-present")) { + device_property_read_u8(dev, "uicc-present", &tmp); + phy->se_status.is_uicc_present = tmp; + } + + return 0; +} + +static int st_nci_i2c_of_request_resources(struct i2c_client *client) +{ + struct st_nci_i2c_phy *phy = i2c_get_clientdata(client); + struct device_node *pp; + int gpio; + int r; + + pp = client->dev.of_node; + if (!pp) + return -ENODEV; + + /* Get GPIO from device tree */ + gpio = of_get_named_gpio(pp, "reset-gpios", 0); + if (gpio < 0) { + nfc_err(&client->dev, + "Failed to retrieve reset-gpios from device tree\n"); + return gpio; + } + + /* GPIO request and configuration */ + r = devm_gpio_request_one(&client->dev, gpio, + GPIOF_OUT_INIT_HIGH, ST_NCI_GPIO_NAME_RESET); + if (r) { + nfc_err(&client->dev, "Failed to request reset pin\n"); + return r; + } + phy->gpio_reset = gpio; + + phy->irq_polarity = irq_get_trigger_type(client->irq); + + phy->se_status.is_ese_present = + of_property_read_bool(pp, "ese-present"); + phy->se_status.is_uicc_present = + of_property_read_bool(pp, "uicc-present"); + + return 0; +} + +static int st_nci_i2c_request_resources(struct i2c_client *client) +{ + struct st_nci_nfc_platform_data *pdata; + struct st_nci_i2c_phy *phy = i2c_get_clientdata(client); + int r; + + pdata = client->dev.platform_data; + if (pdata == NULL) { + nfc_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + + /* store for later use */ + phy->gpio_reset = pdata->gpio_reset; + phy->irq_polarity = pdata->irq_polarity; + + r = devm_gpio_request_one(&client->dev, + phy->gpio_reset, GPIOF_OUT_INIT_HIGH, + ST_NCI_GPIO_NAME_RESET); + if (r) { + pr_err("%s : reset gpio_request failed\n", __FILE__); + return r; + } + + phy->se_status.is_ese_present = pdata->is_ese_present; + phy->se_status.is_uicc_present = pdata->is_uicc_present; + + return 0; +} + +static int st_nci_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct st_nci_i2c_phy *phy; + struct st_nci_nfc_platform_data *pdata; + int r; + + dev_dbg(&client->dev, "%s\n", __func__); + dev_dbg(&client->dev, "IRQ: %d\n", client->irq); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + nfc_err(&client->dev, "Need I2C_FUNC_I2C\n"); + return -ENODEV; + } + + phy = devm_kzalloc(&client->dev, sizeof(struct st_nci_i2c_phy), + GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->i2c_dev = client; + + i2c_set_clientdata(client, phy); + + pdata = client->dev.platform_data; + if (!pdata && client->dev.of_node) { + r = st_nci_i2c_of_request_resources(client); + if (r) { + nfc_err(&client->dev, "No platform data\n"); + return r; + } + } else if (pdata) { + r = st_nci_i2c_request_resources(client); + if (r) { + nfc_err(&client->dev, + "Cannot get platform resources\n"); + return r; + } + } else if (ACPI_HANDLE(&client->dev)) { + r = st_nci_i2c_acpi_request_resources(client); + if (r) { + nfc_err(&client->dev, "Cannot get ACPI data\n"); + return r; + } + } else { + nfc_err(&client->dev, + "st_nci platform resources not available\n"); + return -ENODEV; + } + + r = ndlc_probe(phy, &i2c_phy_ops, &client->dev, + ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM, + &phy->ndlc, &phy->se_status); + if (r < 0) { + nfc_err(&client->dev, "Unable to register ndlc layer\n"); + return r; + } + + phy->irq_active = true; + r = devm_request_threaded_irq(&client->dev, client->irq, NULL, + st_nci_irq_thread_fn, + phy->irq_polarity | IRQF_ONESHOT, + ST_NCI_DRIVER_NAME, phy); + if (r < 0) + nfc_err(&client->dev, "Unable to register IRQ handler\n"); + + return r; +} + +static int st_nci_i2c_remove(struct i2c_client *client) +{ + struct st_nci_i2c_phy *phy = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "%s\n", __func__); + + ndlc_remove(phy->ndlc); + + return 0; +} + +static struct i2c_device_id st_nci_i2c_id_table[] = { + {ST_NCI_DRIVER_NAME, 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, st_nci_i2c_id_table); + +static const struct acpi_device_id st_nci_i2c_acpi_match[] = { + {"SMO2101"}, + {"SMO2102"}, + {} +}; +MODULE_DEVICE_TABLE(acpi, st_nci_i2c_acpi_match); + +static const struct of_device_id of_st_nci_i2c_match[] = { + { .compatible = "st,st21nfcb-i2c", }, + { .compatible = "st,st21nfcb_i2c", }, + { .compatible = "st,st21nfcc-i2c", }, + {} +}; +MODULE_DEVICE_TABLE(of, of_st_nci_i2c_match); + +static struct i2c_driver st_nci_i2c_driver = { + .driver = { + .name = ST_NCI_I2C_DRIVER_NAME, + .of_match_table = of_match_ptr(of_st_nci_i2c_match), + .acpi_match_table = ACPI_PTR(st_nci_i2c_acpi_match), + }, + .probe = st_nci_i2c_probe, + .id_table = st_nci_i2c_id_table, + .remove = st_nci_i2c_remove, +}; +module_i2c_driver(st_nci_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/st-nci/ndlc.c b/drivers/nfc/st-nci/ndlc.c new file mode 100644 index 0000000..50880d7 --- /dev/null +++ b/drivers/nfc/st-nci/ndlc.c @@ -0,0 +1,316 @@ +/* + * Low Level Transport (NDLC) Driver for STMicroelectronics NFC Chip + * + * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/sched.h> +#include <net/nfc/nci_core.h> + +#include "st-nci.h" + +#define NDLC_TIMER_T1 100 +#define NDLC_TIMER_T1_WAIT 400 +#define NDLC_TIMER_T2 1200 + +#define PCB_TYPE_DATAFRAME 0x80 +#define PCB_TYPE_SUPERVISOR 0xc0 +#define PCB_TYPE_MASK PCB_TYPE_SUPERVISOR + +#define PCB_SYNC_ACK 0x20 +#define PCB_SYNC_NACK 0x10 +#define PCB_SYNC_WAIT 0x30 +#define PCB_SYNC_NOINFO 0x00 +#define PCB_SYNC_MASK PCB_SYNC_WAIT + +#define PCB_DATAFRAME_RETRANSMIT_YES 0x00 +#define PCB_DATAFRAME_RETRANSMIT_NO 0x04 +#define PCB_DATAFRAME_RETRANSMIT_MASK PCB_DATAFRAME_RETRANSMIT_NO + +#define PCB_SUPERVISOR_RETRANSMIT_YES 0x00 +#define PCB_SUPERVISOR_RETRANSMIT_NO 0x02 +#define PCB_SUPERVISOR_RETRANSMIT_MASK PCB_SUPERVISOR_RETRANSMIT_NO + +#define PCB_FRAME_CRC_INFO_PRESENT 0x08 +#define PCB_FRAME_CRC_INFO_NOTPRESENT 0x00 +#define PCB_FRAME_CRC_INFO_MASK PCB_FRAME_CRC_INFO_PRESENT + +#define NDLC_DUMP_SKB(info, skb) \ +do { \ + pr_debug("%s:\n", info); \ + print_hex_dump(KERN_DEBUG, "ndlc: ", DUMP_PREFIX_OFFSET, \ + 16, 1, skb->data, skb->len, 0); \ +} while (0) + +int ndlc_open(struct llt_ndlc *ndlc) +{ + /* toggle reset pin */ + ndlc->ops->enable(ndlc->phy_id); + ndlc->powered = 1; + return 0; +} +EXPORT_SYMBOL(ndlc_open); + +void ndlc_close(struct llt_ndlc *ndlc) +{ + struct nci_mode_set_cmd cmd; + + cmd.cmd_type = ST_NCI_SET_NFC_MODE; + cmd.mode = 0; + + /* toggle reset pin */ + ndlc->ops->enable(ndlc->phy_id); + + nci_prop_cmd(ndlc->ndev, ST_NCI_CORE_PROP, + sizeof(struct nci_mode_set_cmd), (__u8 *)&cmd); + + ndlc->powered = 0; + ndlc->ops->disable(ndlc->phy_id); +} +EXPORT_SYMBOL(ndlc_close); + +int ndlc_send(struct llt_ndlc *ndlc, struct sk_buff *skb) +{ + /* add ndlc header */ + u8 pcb = PCB_TYPE_DATAFRAME | PCB_DATAFRAME_RETRANSMIT_NO | + PCB_FRAME_CRC_INFO_NOTPRESENT; + + *skb_push(skb, 1) = pcb; + skb_queue_tail(&ndlc->send_q, skb); + + schedule_work(&ndlc->sm_work); + + return 0; +} +EXPORT_SYMBOL(ndlc_send); + +static void llt_ndlc_send_queue(struct llt_ndlc *ndlc) +{ + struct sk_buff *skb; + int r; + unsigned long time_sent; + + if (ndlc->send_q.qlen) + pr_debug("sendQlen=%d unackQlen=%d\n", + ndlc->send_q.qlen, ndlc->ack_pending_q.qlen); + + while (ndlc->send_q.qlen) { + skb = skb_dequeue(&ndlc->send_q); + NDLC_DUMP_SKB("ndlc frame written", skb); + r = ndlc->ops->write(ndlc->phy_id, skb); + if (r < 0) { + ndlc->hard_fault = r; + break; + } + time_sent = jiffies; + *(unsigned long *)skb->cb = time_sent; + + skb_queue_tail(&ndlc->ack_pending_q, skb); + + /* start timer t1 for ndlc aknowledge */ + ndlc->t1_active = true; + mod_timer(&ndlc->t1_timer, time_sent + + msecs_to_jiffies(NDLC_TIMER_T1)); + /* start timer t2 for chip availability */ + ndlc->t2_active = true; + mod_timer(&ndlc->t2_timer, time_sent + + msecs_to_jiffies(NDLC_TIMER_T2)); + } +} + +static void llt_ndlc_requeue_data_pending(struct llt_ndlc *ndlc) +{ + struct sk_buff *skb; + u8 pcb; + + while ((skb = skb_dequeue_tail(&ndlc->ack_pending_q))) { + pcb = skb->data[0]; + switch (pcb & PCB_TYPE_MASK) { + case PCB_TYPE_SUPERVISOR: + skb->data[0] = (pcb & ~PCB_SUPERVISOR_RETRANSMIT_MASK) | + PCB_SUPERVISOR_RETRANSMIT_YES; + break; + case PCB_TYPE_DATAFRAME: + skb->data[0] = (pcb & ~PCB_DATAFRAME_RETRANSMIT_MASK) | + PCB_DATAFRAME_RETRANSMIT_YES; + break; + default: + pr_err("UNKNOWN Packet Control Byte=%d\n", pcb); + kfree_skb(skb); + continue; + } + skb_queue_head(&ndlc->send_q, skb); + } +} + +static void llt_ndlc_rcv_queue(struct llt_ndlc *ndlc) +{ + struct sk_buff *skb; + u8 pcb; + unsigned long time_sent; + + if (ndlc->rcv_q.qlen) + pr_debug("rcvQlen=%d\n", ndlc->rcv_q.qlen); + + while ((skb = skb_dequeue(&ndlc->rcv_q)) != NULL) { + pcb = skb->data[0]; + skb_pull(skb, 1); + if ((pcb & PCB_TYPE_MASK) == PCB_TYPE_SUPERVISOR) { + switch (pcb & PCB_SYNC_MASK) { + case PCB_SYNC_ACK: + skb = skb_dequeue(&ndlc->ack_pending_q); + kfree_skb(skb); + del_timer_sync(&ndlc->t1_timer); + del_timer_sync(&ndlc->t2_timer); + ndlc->t2_active = false; + ndlc->t1_active = false; + break; + case PCB_SYNC_NACK: + llt_ndlc_requeue_data_pending(ndlc); + llt_ndlc_send_queue(ndlc); + /* start timer t1 for ndlc aknowledge */ + time_sent = jiffies; + ndlc->t1_active = true; + mod_timer(&ndlc->t1_timer, time_sent + + msecs_to_jiffies(NDLC_TIMER_T1)); + break; + case PCB_SYNC_WAIT: + time_sent = jiffies; + ndlc->t1_active = true; + mod_timer(&ndlc->t1_timer, time_sent + + msecs_to_jiffies(NDLC_TIMER_T1_WAIT)); + break; + default: + kfree_skb(skb); + break; + } + } else if ((pcb & PCB_TYPE_MASK) == PCB_TYPE_DATAFRAME) { + nci_recv_frame(ndlc->ndev, skb); + } else { + kfree_skb(skb); + } + } +} + +static void llt_ndlc_sm_work(struct work_struct *work) +{ + struct llt_ndlc *ndlc = container_of(work, struct llt_ndlc, sm_work); + + llt_ndlc_send_queue(ndlc); + llt_ndlc_rcv_queue(ndlc); + + if (ndlc->t1_active && timer_pending(&ndlc->t1_timer) == 0) { + pr_debug + ("Handle T1(recv SUPERVISOR) elapsed (T1 now inactive)\n"); + ndlc->t1_active = false; + + llt_ndlc_requeue_data_pending(ndlc); + llt_ndlc_send_queue(ndlc); + } + + if (ndlc->t2_active && timer_pending(&ndlc->t2_timer) == 0) { + pr_debug("Handle T2(recv DATA) elapsed (T2 now inactive)\n"); + ndlc->t2_active = false; + ndlc->t1_active = false; + del_timer_sync(&ndlc->t1_timer); + del_timer_sync(&ndlc->t2_timer); + ndlc_close(ndlc); + ndlc->hard_fault = -EREMOTEIO; + } +} + +void ndlc_recv(struct llt_ndlc *ndlc, struct sk_buff *skb) +{ + if (skb == NULL) { + pr_err("NULL Frame -> link is dead\n"); + ndlc->hard_fault = -EREMOTEIO; + ndlc_close(ndlc); + } else { + NDLC_DUMP_SKB("incoming frame", skb); + skb_queue_tail(&ndlc->rcv_q, skb); + } + + schedule_work(&ndlc->sm_work); +} +EXPORT_SYMBOL(ndlc_recv); + +static void ndlc_t1_timeout(unsigned long data) +{ + struct llt_ndlc *ndlc = (struct llt_ndlc *)data; + + pr_debug("\n"); + + schedule_work(&ndlc->sm_work); +} + +static void ndlc_t2_timeout(unsigned long data) +{ + struct llt_ndlc *ndlc = (struct llt_ndlc *)data; + + pr_debug("\n"); + + schedule_work(&ndlc->sm_work); +} + +int ndlc_probe(void *phy_id, struct nfc_phy_ops *phy_ops, struct device *dev, + int phy_headroom, int phy_tailroom, struct llt_ndlc **ndlc_id, + struct st_nci_se_status *se_status) +{ + struct llt_ndlc *ndlc; + + ndlc = devm_kzalloc(dev, sizeof(struct llt_ndlc), GFP_KERNEL); + if (!ndlc) + return -ENOMEM; + + ndlc->ops = phy_ops; + ndlc->phy_id = phy_id; + ndlc->dev = dev; + ndlc->powered = 0; + + *ndlc_id = ndlc; + + /* initialize timers */ + init_timer(&ndlc->t1_timer); + ndlc->t1_timer.data = (unsigned long)ndlc; + ndlc->t1_timer.function = ndlc_t1_timeout; + + init_timer(&ndlc->t2_timer); + ndlc->t2_timer.data = (unsigned long)ndlc; + ndlc->t2_timer.function = ndlc_t2_timeout; + + skb_queue_head_init(&ndlc->rcv_q); + skb_queue_head_init(&ndlc->send_q); + skb_queue_head_init(&ndlc->ack_pending_q); + + INIT_WORK(&ndlc->sm_work, llt_ndlc_sm_work); + + return st_nci_probe(ndlc, phy_headroom, phy_tailroom, se_status); +} +EXPORT_SYMBOL(ndlc_probe); + +void ndlc_remove(struct llt_ndlc *ndlc) +{ + st_nci_remove(ndlc->ndev); + + /* cancel timers */ + del_timer_sync(&ndlc->t1_timer); + del_timer_sync(&ndlc->t2_timer); + ndlc->t2_active = false; + ndlc->t1_active = false; + + skb_queue_purge(&ndlc->rcv_q); + skb_queue_purge(&ndlc->send_q); +} +EXPORT_SYMBOL(ndlc_remove); diff --git a/drivers/nfc/st-nci/ndlc.h b/drivers/nfc/st-nci/ndlc.h new file mode 100644 index 0000000..bdf78ff --- /dev/null +++ b/drivers/nfc/st-nci/ndlc.h @@ -0,0 +1,63 @@ +/* + * NCI based Driver for STMicroelectronics NFC Chip + * + * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LOCAL_NDLC_H_ +#define __LOCAL_NDLC_H_ + +#include <linux/skbuff.h> +#include <net/nfc/nfc.h> + +struct st_nci_se_status; + +/* Low Level Transport description */ +struct llt_ndlc { + struct nci_dev *ndev; + struct nfc_phy_ops *ops; + void *phy_id; + + struct timer_list t1_timer; + bool t1_active; + + struct timer_list t2_timer; + bool t2_active; + + struct sk_buff_head rcv_q; + struct sk_buff_head send_q; + struct sk_buff_head ack_pending_q; + + struct work_struct sm_work; + + struct device *dev; + + /* + * < 0 if hardware error occurred + * and prevents normal operation. + */ + int hard_fault; + int powered; +}; + +int ndlc_open(struct llt_ndlc *ndlc); +void ndlc_close(struct llt_ndlc *ndlc); +int ndlc_send(struct llt_ndlc *ndlc, struct sk_buff *skb); +void ndlc_recv(struct llt_ndlc *ndlc, struct sk_buff *skb); +int ndlc_probe(void *phy_id, struct nfc_phy_ops *phy_ops, struct device *dev, + int phy_headroom, int phy_tailroom, struct llt_ndlc **ndlc_id, + struct st_nci_se_status *se_status); +void ndlc_remove(struct llt_ndlc *ndlc); +#endif /* __LOCAL_NDLC_H__ */ diff --git a/drivers/nfc/st-nci/se.c b/drivers/nfc/st-nci/se.c new file mode 100644 index 0000000..56f2112 --- /dev/null +++ b/drivers/nfc/st-nci/se.c @@ -0,0 +1,763 @@ +/* + * Secure Element driver for STMicroelectronics NFC NCI chip + * + * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/nfc.h> +#include <linux/delay.h> +#include <net/nfc/nci.h> +#include <net/nfc/nci_core.h> + +#include "st-nci.h" + +struct st_nci_pipe_info { + u8 pipe_state; + u8 src_host_id; + u8 src_gate_id; + u8 dst_host_id; + u8 dst_gate_id; +} __packed; + +/* Hosts */ +#define ST_NCI_HOST_CONTROLLER_ID 0x00 +#define ST_NCI_TERMINAL_HOST_ID 0x01 +#define ST_NCI_UICC_HOST_ID 0x02 +#define ST_NCI_ESE_HOST_ID 0xc0 + +/* Gates */ +#define ST_NCI_APDU_READER_GATE 0xf0 +#define ST_NCI_CONNECTIVITY_GATE 0x41 + +/* Pipes */ +#define ST_NCI_DEVICE_MGNT_PIPE 0x02 + +/* Connectivity pipe only */ +#define ST_NCI_SE_COUNT_PIPE_UICC 0x01 +/* Connectivity + APDU Reader pipe */ +#define ST_NCI_SE_COUNT_PIPE_EMBEDDED 0x02 + +#define ST_NCI_SE_TO_HOT_PLUG 1000 /* msecs */ +#define ST_NCI_SE_TO_PIPES 2000 + +#define ST_NCI_EVT_HOT_PLUG_IS_INHIBITED(x) (x->data[0] & 0x80) + +#define NCI_HCI_APDU_PARAM_ATR 0x01 +#define NCI_HCI_ADMIN_PARAM_SESSION_IDENTITY 0x01 +#define NCI_HCI_ADMIN_PARAM_WHITELIST 0x03 +#define NCI_HCI_ADMIN_PARAM_HOST_LIST 0x04 + +#define ST_NCI_EVT_SE_HARD_RESET 0x20 +#define ST_NCI_EVT_TRANSMIT_DATA 0x10 +#define ST_NCI_EVT_WTX_REQUEST 0x11 +#define ST_NCI_EVT_SE_SOFT_RESET 0x11 +#define ST_NCI_EVT_SE_END_OF_APDU_TRANSFER 0x21 +#define ST_NCI_EVT_HOT_PLUG 0x03 + +#define ST_NCI_SE_MODE_OFF 0x00 +#define ST_NCI_SE_MODE_ON 0x01 + +#define ST_NCI_EVT_CONNECTIVITY 0x10 +#define ST_NCI_EVT_TRANSACTION 0x12 + +#define ST_NCI_DM_GETINFO 0x13 +#define ST_NCI_DM_GETINFO_PIPE_LIST 0x02 +#define ST_NCI_DM_GETINFO_PIPE_INFO 0x01 +#define ST_NCI_DM_PIPE_CREATED 0x02 +#define ST_NCI_DM_PIPE_OPEN 0x04 +#define ST_NCI_DM_RF_ACTIVE 0x80 +#define ST_NCI_DM_DISCONNECT 0x30 + +#define ST_NCI_DM_IS_PIPE_OPEN(p) \ + ((p & 0x0f) == (ST_NCI_DM_PIPE_CREATED | ST_NCI_DM_PIPE_OPEN)) + +#define ST_NCI_ATR_DEFAULT_BWI 0x04 + +/* + * WT = 2^BWI/10[s], convert into msecs and add a secure + * room by increasing by 2 this timeout + */ +#define ST_NCI_BWI_TO_TIMEOUT(x) ((1 << x) * 200) +#define ST_NCI_ATR_GET_Y_FROM_TD(x) (x >> 4) + +/* If TA is present bit 0 is set */ +#define ST_NCI_ATR_TA_PRESENT(x) (x & 0x01) +/* If TB is present bit 1 is set */ +#define ST_NCI_ATR_TB_PRESENT(x) (x & 0x02) + +#define ST_NCI_NUM_DEVICES 256 + +static DECLARE_BITMAP(dev_mask, ST_NCI_NUM_DEVICES); + +/* Here are the mandatory pipe for st_nci */ +static struct nci_hci_gate st_nci_gates[] = { + {NCI_HCI_ADMIN_GATE, NCI_HCI_ADMIN_PIPE, + ST_NCI_HOST_CONTROLLER_ID}, + {NCI_HCI_LINK_MGMT_GATE, NCI_HCI_LINK_MGMT_PIPE, + ST_NCI_HOST_CONTROLLER_ID}, + {ST_NCI_DEVICE_MGNT_GATE, ST_NCI_DEVICE_MGNT_PIPE, + ST_NCI_HOST_CONTROLLER_ID}, + + {NCI_HCI_IDENTITY_MGMT_GATE, NCI_HCI_INVALID_PIPE, + ST_NCI_HOST_CONTROLLER_ID}, + + /* Secure element pipes are created by secure element host */ + {ST_NCI_CONNECTIVITY_GATE, NCI_HCI_DO_NOT_OPEN_PIPE, + ST_NCI_HOST_CONTROLLER_ID}, + {ST_NCI_APDU_READER_GATE, NCI_HCI_DO_NOT_OPEN_PIPE, + ST_NCI_HOST_CONTROLLER_ID}, +}; + +static u8 st_nci_se_get_bwi(struct nci_dev *ndev) +{ + int i; + u8 td; + struct st_nci_info *info = nci_get_drvdata(ndev); + + /* Bits 8 to 5 of the first TB for T=1 encode BWI from zero to nine */ + for (i = 1; i < ST_NCI_ESE_MAX_LENGTH; i++) { + td = ST_NCI_ATR_GET_Y_FROM_TD(info->se_info.atr[i]); + if (ST_NCI_ATR_TA_PRESENT(td)) + i++; + if (ST_NCI_ATR_TB_PRESENT(td)) { + i++; + return info->se_info.atr[i] >> 4; + } + } + return ST_NCI_ATR_DEFAULT_BWI; +} + +static void st_nci_se_get_atr(struct nci_dev *ndev) +{ + struct st_nci_info *info = nci_get_drvdata(ndev); + int r; + struct sk_buff *skb; + + r = nci_hci_get_param(ndev, ST_NCI_APDU_READER_GATE, + NCI_HCI_APDU_PARAM_ATR, &skb); + if (r < 0) + return; + + if (skb->len <= ST_NCI_ESE_MAX_LENGTH) { + memcpy(info->se_info.atr, skb->data, skb->len); + + info->se_info.wt_timeout = + ST_NCI_BWI_TO_TIMEOUT(st_nci_se_get_bwi(ndev)); + } + kfree_skb(skb); +} + +int st_nci_hci_load_session(struct nci_dev *ndev) +{ + int i, j, r; + struct sk_buff *skb_pipe_list, *skb_pipe_info; + struct st_nci_pipe_info *dm_pipe_info; + u8 pipe_list[] = { ST_NCI_DM_GETINFO_PIPE_LIST, + ST_NCI_TERMINAL_HOST_ID}; + u8 pipe_info[] = { ST_NCI_DM_GETINFO_PIPE_INFO, + ST_NCI_TERMINAL_HOST_ID, 0}; + + /* On ST_NCI device pipes number are dynamics + * If pipes are already created, hci_dev_up will fail. + * Doing a clear all pipe is a bad idea because: + * - It does useless EEPROM cycling + * - It might cause issue for secure elements support + * (such as removing connectivity or APDU reader pipe) + * A better approach on ST_NCI is to: + * - get a pipe list for each host. + * (eg: ST_NCI_HOST_CONTROLLER_ID for now). + * (TODO Later on UICC HOST and eSE HOST) + * - get pipe information + * - match retrieved pipe list in st_nci_gates + * ST_NCI_DEVICE_MGNT_GATE is a proprietary gate + * with ST_NCI_DEVICE_MGNT_PIPE. + * Pipe can be closed and need to be open. + */ + r = nci_hci_connect_gate(ndev, ST_NCI_HOST_CONTROLLER_ID, + ST_NCI_DEVICE_MGNT_GATE, + ST_NCI_DEVICE_MGNT_PIPE); + if (r < 0) + return r; + + /* Get pipe list */ + r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, + ST_NCI_DM_GETINFO, pipe_list, sizeof(pipe_list), + &skb_pipe_list); + if (r < 0) + return r; + + /* Complete the existing gate_pipe table */ + for (i = 0; i < skb_pipe_list->len; i++) { + pipe_info[2] = skb_pipe_list->data[i]; + r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, + ST_NCI_DM_GETINFO, pipe_info, + sizeof(pipe_info), &skb_pipe_info); + + if (r) + continue; + + /* + * Match pipe ID and gate ID + * Output format from ST21NFC_DM_GETINFO is: + * - pipe state (1byte) + * - source hid (1byte) + * - source gid (1byte) + * - destination hid (1byte) + * - destination gid (1byte) + */ + dm_pipe_info = (struct st_nci_pipe_info *)skb_pipe_info->data; + if (dm_pipe_info->dst_gate_id == ST_NCI_APDU_READER_GATE && + dm_pipe_info->src_host_id == ST_NCI_UICC_HOST_ID) { + pr_err("Unexpected apdu_reader pipe on host %x\n", + dm_pipe_info->src_host_id); + kfree_skb(skb_pipe_info); + continue; + } + + for (j = 3; (j < ARRAY_SIZE(st_nci_gates)) && + (st_nci_gates[j].gate != dm_pipe_info->dst_gate_id); j++) + ; + + if (j < ARRAY_SIZE(st_nci_gates) && + st_nci_gates[j].gate == dm_pipe_info->dst_gate_id && + ST_NCI_DM_IS_PIPE_OPEN(dm_pipe_info->pipe_state)) { + ndev->hci_dev->init_data.gates[j].pipe = pipe_info[2]; + + ndev->hci_dev->gate2pipe[st_nci_gates[j].gate] = + pipe_info[2]; + ndev->hci_dev->pipes[pipe_info[2]].gate = + st_nci_gates[j].gate; + ndev->hci_dev->pipes[pipe_info[2]].host = + dm_pipe_info->src_host_id; + } + kfree_skb(skb_pipe_info); + } + + /* + * 3 gates have a well known pipe ID. Only NCI_HCI_LINK_MGMT_GATE + * is not yet open at this stage. + */ + r = nci_hci_connect_gate(ndev, ST_NCI_HOST_CONTROLLER_ID, + NCI_HCI_LINK_MGMT_GATE, + NCI_HCI_LINK_MGMT_PIPE); + + kfree_skb(skb_pipe_list); + return r; +} +EXPORT_SYMBOL_GPL(st_nci_hci_load_session); + +static void st_nci_hci_admin_event_received(struct nci_dev *ndev, + u8 event, struct sk_buff *skb) +{ + struct st_nci_info *info = nci_get_drvdata(ndev); + + switch (event) { + case ST_NCI_EVT_HOT_PLUG: + if (info->se_info.se_active) { + if (!ST_NCI_EVT_HOT_PLUG_IS_INHIBITED(skb)) { + del_timer_sync(&info->se_info.se_active_timer); + info->se_info.se_active = false; + complete(&info->se_info.req_completion); + } else { + mod_timer(&info->se_info.se_active_timer, + jiffies + + msecs_to_jiffies(ST_NCI_SE_TO_PIPES)); + } + } + break; + default: + nfc_err(&ndev->nfc_dev->dev, "Unexpected event on admin gate\n"); + } +} + +static int st_nci_hci_apdu_reader_event_received(struct nci_dev *ndev, + u8 event, + struct sk_buff *skb) +{ + int r = 0; + struct st_nci_info *info = nci_get_drvdata(ndev); + + pr_debug("apdu reader gate event: %x\n", event); + + switch (event) { + case ST_NCI_EVT_TRANSMIT_DATA: + del_timer_sync(&info->se_info.bwi_timer); + info->se_info.bwi_active = false; + info->se_info.cb(info->se_info.cb_context, + skb->data, skb->len, 0); + break; + case ST_NCI_EVT_WTX_REQUEST: + mod_timer(&info->se_info.bwi_timer, jiffies + + msecs_to_jiffies(info->se_info.wt_timeout)); + break; + default: + nfc_err(&ndev->nfc_dev->dev, "Unexpected event on apdu reader gate\n"); + return 1; + } + + kfree_skb(skb); + return r; +} + +/* + * Returns: + * <= 0: driver handled the event, skb consumed + * 1: driver does not handle the event, please do standard processing + */ +static int st_nci_hci_connectivity_event_received(struct nci_dev *ndev, + u8 host, u8 event, + struct sk_buff *skb) +{ + int r = 0; + struct device *dev = &ndev->nfc_dev->dev; + struct nfc_evt_transaction *transaction; + + pr_debug("connectivity gate event: %x\n", event); + + switch (event) { + case ST_NCI_EVT_CONNECTIVITY: + r = nfc_se_connectivity(ndev->nfc_dev, host); + break; + case ST_NCI_EVT_TRANSACTION: + /* According to specification etsi 102 622 + * 11.2.2.4 EVT_TRANSACTION Table 52 + * Description Tag Length + * AID 81 5 to 16 + * PARAMETERS 82 0 to 255 + */ + if (skb->len < NFC_MIN_AID_LENGTH + 2 && + skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG) + return -EPROTO; + + transaction = (struct nfc_evt_transaction *)devm_kzalloc(dev, + skb->len - 2, GFP_KERNEL); + + transaction->aid_len = skb->data[1]; + memcpy(transaction->aid, &skb->data[2], transaction->aid_len); + + /* Check next byte is PARAMETERS tag (82) */ + if (skb->data[transaction->aid_len + 2] != + NFC_EVT_TRANSACTION_PARAMS_TAG) + return -EPROTO; + + transaction->params_len = skb->data[transaction->aid_len + 3]; + memcpy(transaction->params, skb->data + + transaction->aid_len + 4, transaction->params_len); + + r = nfc_se_transaction(ndev->nfc_dev, host, transaction); + break; + default: + nfc_err(&ndev->nfc_dev->dev, "Unexpected event on connectivity gate\n"); + return 1; + } + kfree_skb(skb); + return r; +} + +void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe, + u8 event, struct sk_buff *skb) +{ + u8 gate = ndev->hci_dev->pipes[pipe].gate; + u8 host = ndev->hci_dev->pipes[pipe].host; + + switch (gate) { + case NCI_HCI_ADMIN_GATE: + st_nci_hci_admin_event_received(ndev, event, skb); + break; + case ST_NCI_APDU_READER_GATE: + st_nci_hci_apdu_reader_event_received(ndev, event, skb); + break; + case ST_NCI_CONNECTIVITY_GATE: + st_nci_hci_connectivity_event_received(ndev, host, event, skb); + break; + } +} +EXPORT_SYMBOL_GPL(st_nci_hci_event_received); + +void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd, + struct sk_buff *skb) +{ + struct st_nci_info *info = nci_get_drvdata(ndev); + u8 gate = ndev->hci_dev->pipes[pipe].gate; + + pr_debug("cmd: %x\n", cmd); + + switch (cmd) { + case NCI_HCI_ANY_OPEN_PIPE: + if (gate != ST_NCI_APDU_READER_GATE && + ndev->hci_dev->pipes[pipe].host != ST_NCI_UICC_HOST_ID) + ndev->hci_dev->count_pipes++; + + if (ndev->hci_dev->count_pipes == + ndev->hci_dev->expected_pipes) { + del_timer_sync(&info->se_info.se_active_timer); + info->se_info.se_active = false; + ndev->hci_dev->count_pipes = 0; + complete(&info->se_info.req_completion); + } + break; + } +} +EXPORT_SYMBOL_GPL(st_nci_hci_cmd_received); + +static int st_nci_control_se(struct nci_dev *ndev, u8 se_idx, + u8 state) +{ + struct st_nci_info *info = nci_get_drvdata(ndev); + int r, i; + struct sk_buff *sk_host_list; + u8 host_id; + + switch (se_idx) { + case ST_NCI_UICC_HOST_ID: + ndev->hci_dev->count_pipes = 0; + ndev->hci_dev->expected_pipes = ST_NCI_SE_COUNT_PIPE_UICC; + break; + case ST_NCI_ESE_HOST_ID: + ndev->hci_dev->count_pipes = 0; + ndev->hci_dev->expected_pipes = ST_NCI_SE_COUNT_PIPE_EMBEDDED; + break; + default: + return -EINVAL; + } + + /* + * Wait for an EVT_HOT_PLUG in order to + * retrieve a relevant host list. + */ + reinit_completion(&info->se_info.req_completion); + r = nci_nfcee_mode_set(ndev, se_idx, state); + if (r != NCI_STATUS_OK) + return r; + + mod_timer(&info->se_info.se_active_timer, jiffies + + msecs_to_jiffies(ST_NCI_SE_TO_HOT_PLUG)); + info->se_info.se_active = true; + + /* Ignore return value and check in any case the host_list */ + wait_for_completion_interruptible(&info->se_info.req_completion); + + /* There might be some "collision" after receiving a HOT_PLUG event + * This may cause the CLF to not answer to the next hci command. + * There is no possible synchronization to prevent this. + * Adding a small delay is the only way to solve the issue. + */ + if (info->se_info.se_status->is_ese_present && + info->se_info.se_status->is_uicc_present) + usleep_range(15000, 20000); + + r = nci_hci_get_param(ndev, NCI_HCI_ADMIN_GATE, + NCI_HCI_ADMIN_PARAM_HOST_LIST, &sk_host_list); + if (r != NCI_HCI_ANY_OK) + return r; + + for (i = 0; i < sk_host_list->len && + sk_host_list->data[i] != se_idx; i++) + ; + host_id = sk_host_list->data[i]; + kfree_skb(sk_host_list); + if (state == ST_NCI_SE_MODE_ON && host_id == se_idx) + return se_idx; + else if (state == ST_NCI_SE_MODE_OFF && host_id != se_idx) + return se_idx; + + return -1; +} + +int st_nci_disable_se(struct nci_dev *ndev, u32 se_idx) +{ + int r; + + pr_debug("st_nci_disable_se\n"); + + /* + * According to upper layer, se_idx == NFC_SE_UICC when + * info->se_info.se_status->is_uicc_enable is true should never happen + * Same for eSE. + */ + r = st_nci_control_se(ndev, se_idx, ST_NCI_SE_MODE_OFF); + if (r < 0) { + /* Do best effort to release SWP */ + if (se_idx == NFC_SE_EMBEDDED) { + r = nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE, + ST_NCI_EVT_SE_END_OF_APDU_TRANSFER, + NULL, 0); + } + return r; + } + + return 0; +} +EXPORT_SYMBOL_GPL(st_nci_disable_se); + +int st_nci_enable_se(struct nci_dev *ndev, u32 se_idx) +{ + int r; + + pr_debug("st_nci_enable_se\n"); + + /* + * According to upper layer, se_idx == NFC_SE_UICC when + * info->se_info.se_status->is_uicc_enable is true should never happen. + * Same for eSE. + */ + r = st_nci_control_se(ndev, se_idx, ST_NCI_SE_MODE_ON); + if (r == ST_NCI_ESE_HOST_ID) { + st_nci_se_get_atr(ndev); + r = nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE, + ST_NCI_EVT_SE_SOFT_RESET, NULL, 0); + } + + if (r < 0) { + /* + * The activation procedure failed, the secure element + * is not connected. Remove from the list. + */ + nfc_remove_se(ndev->nfc_dev, se_idx); + return r; + } + + return 0; +} +EXPORT_SYMBOL_GPL(st_nci_enable_se); + +static int st_nci_hci_network_init(struct nci_dev *ndev) +{ + struct st_nci_info *info = nci_get_drvdata(ndev); + struct core_conn_create_dest_spec_params *dest_params; + struct dest_spec_params spec_params; + struct nci_conn_info *conn_info; + int r, dev_num; + + dest_params = + kzalloc(sizeof(struct core_conn_create_dest_spec_params) + + sizeof(struct dest_spec_params), GFP_KERNEL); + if (dest_params == NULL) { + r = -ENOMEM; + goto exit; + } + + dest_params->type = NCI_DESTINATION_SPECIFIC_PARAM_NFCEE_TYPE; + dest_params->length = sizeof(struct dest_spec_params); + spec_params.id = ndev->hci_dev->nfcee_id; + spec_params.protocol = NCI_NFCEE_INTERFACE_HCI_ACCESS; + memcpy(dest_params->value, &spec_params, + sizeof(struct dest_spec_params)); + r = nci_core_conn_create(ndev, NCI_DESTINATION_NFCEE, 1, + sizeof(struct core_conn_create_dest_spec_params) + + sizeof(struct dest_spec_params), + dest_params); + if (r != NCI_STATUS_OK) + goto free_dest_params; + + conn_info = ndev->hci_dev->conn_info; + if (!conn_info) + goto free_dest_params; + + ndev->hci_dev->init_data.gate_count = ARRAY_SIZE(st_nci_gates); + memcpy(ndev->hci_dev->init_data.gates, st_nci_gates, + sizeof(st_nci_gates)); + + /* + * Session id must include the driver name + i2c bus addr + * persistent info to discriminate 2 identical chips + */ + dev_num = find_first_zero_bit(dev_mask, ST_NCI_NUM_DEVICES); + if (dev_num >= ST_NCI_NUM_DEVICES) { + r = -ENODEV; + goto free_dest_params; + } + + scnprintf(ndev->hci_dev->init_data.session_id, + sizeof(ndev->hci_dev->init_data.session_id), + "%s%2x", "ST21BH", dev_num); + + r = nci_hci_dev_session_init(ndev); + if (r != NCI_HCI_ANY_OK) + goto free_dest_params; + + /* + * In factory mode, we prevent secure elements activation + * by disabling nfcee on the current HCI connection id. + * HCI will be used here only for proprietary commands. + */ + if (test_bit(ST_NCI_FACTORY_MODE, &info->flags)) + r = nci_nfcee_mode_set(ndev, + ndev->hci_dev->conn_info->dest_params->id, + NCI_NFCEE_DISABLE); + else + r = nci_nfcee_mode_set(ndev, + ndev->hci_dev->conn_info->dest_params->id, + NCI_NFCEE_ENABLE); + +free_dest_params: + kfree(dest_params); + +exit: + return r; +} + +int st_nci_discover_se(struct nci_dev *ndev) +{ + u8 white_list[2]; + int r, wl_size = 0; + int se_count = 0; + struct st_nci_info *info = nci_get_drvdata(ndev); + + pr_debug("st_nci_discover_se\n"); + + r = st_nci_hci_network_init(ndev); + if (r != 0) + return r; + + if (test_bit(ST_NCI_FACTORY_MODE, &info->flags)) + return 0; + + if (info->se_info.se_status->is_uicc_present) + white_list[wl_size++] = ST_NCI_UICC_HOST_ID; + if (info->se_info.se_status->is_ese_present) + white_list[wl_size++] = ST_NCI_ESE_HOST_ID; + + if (wl_size) { + r = nci_hci_set_param(ndev, NCI_HCI_ADMIN_GATE, + NCI_HCI_ADMIN_PARAM_WHITELIST, + white_list, wl_size); + if (r != NCI_HCI_ANY_OK) + return r; + } + + if (info->se_info.se_status->is_uicc_present) { + nfc_add_se(ndev->nfc_dev, ST_NCI_UICC_HOST_ID, NFC_SE_UICC); + se_count++; + } + + if (info->se_info.se_status->is_ese_present) { + nfc_add_se(ndev->nfc_dev, ST_NCI_ESE_HOST_ID, NFC_SE_EMBEDDED); + se_count++; + } + + return !se_count; +} +EXPORT_SYMBOL_GPL(st_nci_discover_se); + +int st_nci_se_io(struct nci_dev *ndev, u32 se_idx, + u8 *apdu, size_t apdu_length, + se_io_cb_t cb, void *cb_context) +{ + struct st_nci_info *info = nci_get_drvdata(ndev); + + pr_debug("\n"); + + switch (se_idx) { + case ST_NCI_ESE_HOST_ID: + info->se_info.cb = cb; + info->se_info.cb_context = cb_context; + mod_timer(&info->se_info.bwi_timer, jiffies + + msecs_to_jiffies(info->se_info.wt_timeout)); + info->se_info.bwi_active = true; + return nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE, + ST_NCI_EVT_TRANSMIT_DATA, apdu, + apdu_length); + default: + return -ENODEV; + } +} +EXPORT_SYMBOL(st_nci_se_io); + +static void st_nci_se_wt_timeout(unsigned long data) +{ + /* + * No answer from the secure element + * within the defined timeout. + * Let's send a reset request as recovery procedure. + * According to the situation, we first try to send a software reset + * to the secure element. If the next command is still not + * answering in time, we send to the CLF a secure element hardware + * reset request. + */ + /* hardware reset managed through VCC_UICC_OUT power supply */ + u8 param = 0x01; + struct st_nci_info *info = (struct st_nci_info *) data; + + pr_debug("\n"); + + info->se_info.bwi_active = false; + + if (!info->se_info.xch_error) { + info->se_info.xch_error = true; + nci_hci_send_event(info->ndlc->ndev, ST_NCI_APDU_READER_GATE, + ST_NCI_EVT_SE_SOFT_RESET, NULL, 0); + } else { + info->se_info.xch_error = false; + nci_hci_send_event(info->ndlc->ndev, ST_NCI_DEVICE_MGNT_GATE, + ST_NCI_EVT_SE_HARD_RESET, ¶m, 1); + } + info->se_info.cb(info->se_info.cb_context, NULL, 0, -ETIME); +} + +static void st_nci_se_activation_timeout(unsigned long data) +{ + struct st_nci_info *info = (struct st_nci_info *) data; + + pr_debug("\n"); + + info->se_info.se_active = false; + + complete(&info->se_info.req_completion); +} + +int st_nci_se_init(struct nci_dev *ndev, struct st_nci_se_status *se_status) +{ + struct st_nci_info *info = nci_get_drvdata(ndev); + + init_completion(&info->se_info.req_completion); + /* initialize timers */ + init_timer(&info->se_info.bwi_timer); + info->se_info.bwi_timer.data = (unsigned long)info; + info->se_info.bwi_timer.function = st_nci_se_wt_timeout; + info->se_info.bwi_active = false; + + init_timer(&info->se_info.se_active_timer); + info->se_info.se_active_timer.data = (unsigned long)info; + info->se_info.se_active_timer.function = + st_nci_se_activation_timeout; + info->se_info.se_active = false; + + info->se_info.xch_error = false; + + info->se_info.wt_timeout = + ST_NCI_BWI_TO_TIMEOUT(ST_NCI_ATR_DEFAULT_BWI); + + info->se_info.se_status = se_status; + + return 0; +} +EXPORT_SYMBOL(st_nci_se_init); + +void st_nci_se_deinit(struct nci_dev *ndev) +{ + struct st_nci_info *info = nci_get_drvdata(ndev); + + if (info->se_info.bwi_active) + del_timer_sync(&info->se_info.bwi_timer); + if (info->se_info.se_active) + del_timer_sync(&info->se_info.se_active_timer); + + info->se_info.se_active = false; + info->se_info.bwi_active = false; +} +EXPORT_SYMBOL(st_nci_se_deinit); + diff --git a/drivers/nfc/st-nci/spi.c b/drivers/nfc/st-nci/spi.c new file mode 100644 index 0000000..6493e17 --- /dev/null +++ b/drivers/nfc/st-nci/spi.c @@ -0,0 +1,442 @@ +/* + * SPI Link Layer for ST NCI based Driver + * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <linux/acpi.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/nfc.h> +#include <net/nfc/nci.h> +#include <linux/platform_data/st-nci.h> + +#include "st-nci.h" + +#define DRIVER_DESC "NCI NFC driver for ST_NCI" + +/* ndlc header */ +#define ST_NCI_FRAME_HEADROOM 1 +#define ST_NCI_FRAME_TAILROOM 0 + +#define ST_NCI_SPI_MIN_SIZE 4 /* PCB(1) + NCI Packet header(3) */ +#define ST_NCI_SPI_MAX_SIZE 250 /* req 4.2.1 */ + +#define ST_NCI_SPI_DRIVER_NAME "st_nci_spi" + +#define ST_NCI_GPIO_NAME_RESET "reset" + +struct st_nci_spi_phy { + struct spi_device *spi_dev; + struct llt_ndlc *ndlc; + + bool irq_active; + + unsigned int gpio_reset; + unsigned int irq_polarity; + + struct st_nci_se_status se_status; +}; + +static int st_nci_spi_enable(void *phy_id) +{ + struct st_nci_spi_phy *phy = phy_id; + + gpio_set_value(phy->gpio_reset, 0); + usleep_range(10000, 15000); + gpio_set_value(phy->gpio_reset, 1); + usleep_range(80000, 85000); + + if (phy->ndlc->powered == 0 && phy->irq_active == 0) { + enable_irq(phy->spi_dev->irq); + phy->irq_active = true; + } + + return 0; +} + +static void st_nci_spi_disable(void *phy_id) +{ + struct st_nci_spi_phy *phy = phy_id; + + disable_irq_nosync(phy->spi_dev->irq); + phy->irq_active = false; +} + +/* + * Writing a frame must not return the number of written bytes. + * It must return either zero for success, or <0 for error. + * In addition, it must not alter the skb + */ +static int st_nci_spi_write(void *phy_id, struct sk_buff *skb) +{ + int r; + struct st_nci_spi_phy *phy = phy_id; + struct spi_device *dev = phy->spi_dev; + struct sk_buff *skb_rx; + u8 buf[ST_NCI_SPI_MAX_SIZE + NCI_DATA_HDR_SIZE + + ST_NCI_FRAME_HEADROOM + ST_NCI_FRAME_TAILROOM]; + struct spi_transfer spi_xfer = { + .tx_buf = skb->data, + .rx_buf = buf, + .len = skb->len, + }; + + if (phy->ndlc->hard_fault != 0) + return phy->ndlc->hard_fault; + + r = spi_sync_transfer(dev, &spi_xfer, 1); + /* + * We may have received some valuable data on miso line. + * Send them back in the ndlc state machine. + */ + if (!r) { + skb_rx = alloc_skb(skb->len, GFP_KERNEL); + if (!skb_rx) { + r = -ENOMEM; + goto exit; + } + + skb_put(skb_rx, skb->len); + memcpy(skb_rx->data, buf, skb->len); + ndlc_recv(phy->ndlc, skb_rx); + } + +exit: + return r; +} + +/* + * Reads an ndlc frame and returns it in a newly allocated sk_buff. + * returns: + * 0 : if received frame is complete + * -EREMOTEIO : i2c read error (fatal) + * -EBADMSG : frame was incorrect and discarded + * -ENOMEM : cannot allocate skb, frame dropped + */ +static int st_nci_spi_read(struct st_nci_spi_phy *phy, + struct sk_buff **skb) +{ + int r; + u8 len; + u8 buf[ST_NCI_SPI_MAX_SIZE]; + struct spi_device *dev = phy->spi_dev; + struct spi_transfer spi_xfer = { + .rx_buf = buf, + .len = ST_NCI_SPI_MIN_SIZE, + }; + + r = spi_sync_transfer(dev, &spi_xfer, 1); + if (r < 0) + return -EREMOTEIO; + + len = be16_to_cpu(*(__be16 *) (buf + 2)); + if (len > ST_NCI_SPI_MAX_SIZE) { + nfc_err(&dev->dev, "invalid frame len\n"); + phy->ndlc->hard_fault = 1; + return -EBADMSG; + } + + *skb = alloc_skb(ST_NCI_SPI_MIN_SIZE + len, GFP_KERNEL); + if (*skb == NULL) + return -ENOMEM; + + skb_reserve(*skb, ST_NCI_SPI_MIN_SIZE); + skb_put(*skb, ST_NCI_SPI_MIN_SIZE); + memcpy((*skb)->data, buf, ST_NCI_SPI_MIN_SIZE); + + if (!len) + return 0; + + spi_xfer.len = len; + r = spi_sync_transfer(dev, &spi_xfer, 1); + if (r < 0) { + kfree_skb(*skb); + return -EREMOTEIO; + } + + skb_put(*skb, len); + memcpy((*skb)->data + ST_NCI_SPI_MIN_SIZE, buf, len); + + return 0; +} + +/* + * Reads an ndlc frame from the chip. + * + * On ST21NFCB, IRQ goes in idle state when read starts. + */ +static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id) +{ + struct st_nci_spi_phy *phy = phy_id; + struct spi_device *dev; + struct sk_buff *skb = NULL; + int r; + + if (!phy || !phy->ndlc || irq != phy->spi_dev->irq) { + WARN_ON_ONCE(1); + return IRQ_NONE; + } + + dev = phy->spi_dev; + dev_dbg(&dev->dev, "IRQ\n"); + + if (phy->ndlc->hard_fault) + return IRQ_HANDLED; + + if (!phy->ndlc->powered) { + st_nci_spi_disable(phy); + return IRQ_HANDLED; + } + + r = st_nci_spi_read(phy, &skb); + if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG) + return IRQ_HANDLED; + + ndlc_recv(phy->ndlc, skb); + + return IRQ_HANDLED; +} + +static struct nfc_phy_ops spi_phy_ops = { + .write = st_nci_spi_write, + .enable = st_nci_spi_enable, + .disable = st_nci_spi_disable, +}; + +static int st_nci_spi_acpi_request_resources(struct spi_device *spi_dev) +{ + struct st_nci_spi_phy *phy = spi_get_drvdata(spi_dev); + struct gpio_desc *gpiod_reset; + struct device *dev = &spi_dev->dev; + u8 tmp; + + /* Get RESET GPIO from ACPI */ + gpiod_reset = devm_gpiod_get_index(dev, ST_NCI_GPIO_NAME_RESET, 1, + GPIOD_OUT_HIGH); + if (IS_ERR(gpiod_reset)) { + nfc_err(dev, "Unable to get RESET GPIO\n"); + return -ENODEV; + } + + phy->gpio_reset = desc_to_gpio(gpiod_reset); + + phy->irq_polarity = irq_get_trigger_type(spi_dev->irq); + + phy->se_status.is_ese_present = false; + phy->se_status.is_uicc_present = false; + + if (device_property_present(dev, "ese-present")) { + device_property_read_u8(dev, "ese-present", &tmp); + tmp = phy->se_status.is_ese_present; + } + + if (device_property_present(dev, "uicc-present")) { + device_property_read_u8(dev, "uicc-present", &tmp); + tmp = phy->se_status.is_uicc_present; + } + + return 0; +} + +static int st_nci_spi_of_request_resources(struct spi_device *dev) +{ + struct st_nci_spi_phy *phy = spi_get_drvdata(dev); + struct device_node *pp; + int gpio; + int r; + + pp = dev->dev.of_node; + if (!pp) + return -ENODEV; + + /* Get GPIO from device tree */ + gpio = of_get_named_gpio(pp, "reset-gpios", 0); + if (gpio < 0) { + nfc_err(&dev->dev, + "Failed to retrieve reset-gpios from device tree\n"); + return gpio; + } + + /* GPIO request and configuration */ + r = devm_gpio_request_one(&dev->dev, gpio, + GPIOF_OUT_INIT_HIGH, ST_NCI_GPIO_NAME_RESET); + if (r) { + nfc_err(&dev->dev, "Failed to request reset pin\n"); + return r; + } + phy->gpio_reset = gpio; + + phy->irq_polarity = irq_get_trigger_type(dev->irq); + + phy->se_status.is_ese_present = + of_property_read_bool(pp, "ese-present"); + phy->se_status.is_uicc_present = + of_property_read_bool(pp, "uicc-present"); + + return 0; +} + +static int st_nci_spi_request_resources(struct spi_device *dev) +{ + struct st_nci_nfc_platform_data *pdata; + struct st_nci_spi_phy *phy = spi_get_drvdata(dev); + int r; + + pdata = dev->dev.platform_data; + if (pdata == NULL) { + nfc_err(&dev->dev, "No platform data\n"); + return -EINVAL; + } + + /* store for later use */ + phy->gpio_reset = pdata->gpio_reset; + phy->irq_polarity = pdata->irq_polarity; + + r = devm_gpio_request_one(&dev->dev, + phy->gpio_reset, GPIOF_OUT_INIT_HIGH, + ST_NCI_GPIO_NAME_RESET); + if (r) { + pr_err("%s : reset gpio_request failed\n", __FILE__); + return r; + } + + phy->se_status.is_ese_present = pdata->is_ese_present; + phy->se_status.is_uicc_present = pdata->is_uicc_present; + + return 0; +} + +static int st_nci_spi_probe(struct spi_device *dev) +{ + struct st_nci_spi_phy *phy; + struct st_nci_nfc_platform_data *pdata; + int r; + + dev_dbg(&dev->dev, "%s\n", __func__); + dev_dbg(&dev->dev, "IRQ: %d\n", dev->irq); + + /* Check SPI platform functionnalities */ + if (!dev) { + pr_debug("%s: dev is NULL. Device is not accessible.\n", + __func__); + return -ENODEV; + } + + phy = devm_kzalloc(&dev->dev, sizeof(struct st_nci_spi_phy), + GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->spi_dev = dev; + + spi_set_drvdata(dev, phy); + + pdata = dev->dev.platform_data; + if (!pdata && dev->dev.of_node) { + r = st_nci_spi_of_request_resources(dev); + if (r) { + nfc_err(&dev->dev, "No platform data\n"); + return r; + } + } else if (pdata) { + r = st_nci_spi_request_resources(dev); + if (r) { + nfc_err(&dev->dev, + "Cannot get platform resources\n"); + return r; + } + } else if (ACPI_HANDLE(&dev->dev)) { + r = st_nci_spi_acpi_request_resources(dev); + if (r) { + nfc_err(&dev->dev, "Cannot get ACPI data\n"); + return r; + } + } else { + nfc_err(&dev->dev, + "st_nci platform resources not available\n"); + return -ENODEV; + } + + r = ndlc_probe(phy, &spi_phy_ops, &dev->dev, + ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM, + &phy->ndlc, &phy->se_status); + if (r < 0) { + nfc_err(&dev->dev, "Unable to register ndlc layer\n"); + return r; + } + + phy->irq_active = true; + r = devm_request_threaded_irq(&dev->dev, dev->irq, NULL, + st_nci_irq_thread_fn, + phy->irq_polarity | IRQF_ONESHOT, + ST_NCI_SPI_DRIVER_NAME, phy); + if (r < 0) + nfc_err(&dev->dev, "Unable to register IRQ handler\n"); + + return r; +} + +static int st_nci_spi_remove(struct spi_device *dev) +{ + struct st_nci_spi_phy *phy = spi_get_drvdata(dev); + + dev_dbg(&dev->dev, "%s\n", __func__); + + ndlc_remove(phy->ndlc); + + return 0; +} + +static struct spi_device_id st_nci_spi_id_table[] = { + {ST_NCI_SPI_DRIVER_NAME, 0}, + {} +}; +MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table); + +static const struct acpi_device_id st_nci_spi_acpi_match[] = { + {"SMO2101", 0}, + {} +}; +MODULE_DEVICE_TABLE(acpi, st_nci_spi_acpi_match); + +static const struct of_device_id of_st_nci_spi_match[] = { + { .compatible = "st,st21nfcb-spi", }, + {} +}; +MODULE_DEVICE_TABLE(of, of_st_nci_spi_match); + +static struct spi_driver st_nci_spi_driver = { + .driver = { + .name = ST_NCI_SPI_DRIVER_NAME, + .of_match_table = of_match_ptr(of_st_nci_spi_match), + .acpi_match_table = ACPI_PTR(st_nci_spi_acpi_match), + }, + .probe = st_nci_spi_probe, + .id_table = st_nci_spi_id_table, + .remove = st_nci_spi_remove, +}; +module_spi_driver(st_nci_spi_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/st-nci/st-nci.h b/drivers/nfc/st-nci/st-nci.h new file mode 100644 index 0000000..afaf138 --- /dev/null +++ b/drivers/nfc/st-nci/st-nci.h @@ -0,0 +1,153 @@ +/* + * NCI based Driver for STMicroelectronics NFC Chip + * + * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LOCAL_ST_NCI_H_ +#define __LOCAL_ST_NCI_H_ + +#include "ndlc.h" + +/* Define private flags: */ +#define ST_NCI_RUNNING 1 + +#define ST_NCI_CORE_PROP 0x01 +#define ST_NCI_SET_NFC_MODE 0x02 + +/* + * ref ISO7816-3 chap 8.1. the initial character TS is followed by a + * sequence of at most 32 characters. + */ +#define ST_NCI_ESE_MAX_LENGTH 33 + +#define ST_NCI_DEVICE_MGNT_GATE 0x01 + +#define ST_NCI_VENDOR_OUI 0x0080E1 /* STMicroelectronics */ +#define ST_NCI_FACTORY_MODE 2 + +struct nci_mode_set_cmd { + u8 cmd_type; + u8 mode; +} __packed; + +struct nci_mode_set_rsp { + u8 status; +} __packed; + +struct st_nci_se_status { + bool is_ese_present; + bool is_uicc_present; +}; + +struct st_nci_se_info { + struct st_nci_se_status *se_status; + u8 atr[ST_NCI_ESE_MAX_LENGTH]; + struct completion req_completion; + + struct timer_list bwi_timer; + int wt_timeout; /* in msecs */ + bool bwi_active; + + struct timer_list se_active_timer; + bool se_active; + + bool xch_error; + + se_io_cb_t cb; + void *cb_context; +}; + +/** + * enum nfc_vendor_cmds - supported nfc vendor commands + * + * @FACTORY_MODE: Allow to set the driver into a mode where no secure element + * are activated. It does not consider any NFC_ATTR_VENDOR_DATA. + * @HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. + * It does not consider any NFC_ATTR_VENDOR_DATA. + * @HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example + * RF trimmings or low level drivers configurations (I2C, SPI, SWP). + * @HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing + * table following RF technology, CLF mode or protocol. + * @HCI_DM_GET_INFO: Allow to retrieve CLF information. + * @HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low + * level drivers configurations or RF trimmings. + * @HCI_DM_DIRECT_LOAD: Allow to load a firmware into the CLF. A complete + * packet can be more than 8KB. + * @HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF + * configuration changes without CLF power off. + * @HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the + * white list). + * @HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF + * technology. When using this command to anti-collision is done. + * @LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity. + * @HCI_DM_VDC_MEASUREMENT_VALUE: Allow to measure the field applied on the + * CLF antenna. A value between 0 and 0x0f is returned. 0 is maximum. + * @HCI_DM_FWUPD_START: Allow to put CLF into firmware update mode. It is a + * specific CLF command as there is no GPIO for this. + * @HCI_DM_FWUPD_END: Allow to complete firmware update. + * @HCI_DM_VDC_VALUE_COMPARISON: Allow to compare the field applied on the + * CLF antenna to a reference value. + * @MANUFACTURER_SPECIFIC: Allow to retrieve manufacturer specific data + * received during a NCI_CORE_INIT_CMD. + */ +enum nfc_vendor_cmds { + FACTORY_MODE, + HCI_CLEAR_ALL_PIPES, + HCI_DM_PUT_DATA, + HCI_DM_UPDATE_AID, + HCI_DM_GET_INFO, + HCI_DM_GET_DATA, + HCI_DM_DIRECT_LOAD, + HCI_DM_RESET, + HCI_GET_PARAM, + HCI_DM_FIELD_GENERATOR, + LOOPBACK, + HCI_DM_FWUPD_START, + HCI_DM_FWUPD_END, + HCI_DM_VDC_MEASUREMENT_VALUE, + HCI_DM_VDC_VALUE_COMPARISON, + MANUFACTURER_SPECIFIC, +}; + +struct st_nci_info { + struct llt_ndlc *ndlc; + unsigned long flags; + + struct st_nci_se_info se_info; +}; + +void st_nci_remove(struct nci_dev *ndev); +int st_nci_probe(struct llt_ndlc *ndlc, int phy_headroom, + int phy_tailroom, struct st_nci_se_status *se_status); + +int st_nci_se_init(struct nci_dev *ndev, struct st_nci_se_status *se_status); +void st_nci_se_deinit(struct nci_dev *ndev); + +int st_nci_discover_se(struct nci_dev *ndev); +int st_nci_enable_se(struct nci_dev *ndev, u32 se_idx); +int st_nci_disable_se(struct nci_dev *ndev, u32 se_idx); +int st_nci_se_io(struct nci_dev *ndev, u32 se_idx, + u8 *apdu, size_t apdu_length, + se_io_cb_t cb, void *cb_context); +int st_nci_hci_load_session(struct nci_dev *ndev); +void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe, + u8 event, struct sk_buff *skb); +void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd, + struct sk_buff *skb); + +int st_nci_vendor_cmds_init(struct nci_dev *ndev); + +#endif /* __LOCAL_ST_NCI_H_ */ diff --git a/drivers/nfc/st-nci/vendor_cmds.c b/drivers/nfc/st-nci/vendor_cmds.c new file mode 100644 index 0000000..1a836c7 --- /dev/null +++ b/drivers/nfc/st-nci/vendor_cmds.c @@ -0,0 +1,478 @@ +/* + * Proprietary commands extension for STMicroelectronics NFC NCI Chip + * + * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <net/genetlink.h> +#include <linux/module.h> +#include <linux/nfc.h> +#include <linux/delay.h> +#include <net/nfc/nci_core.h> + +#include "st-nci.h" + +#define ST_NCI_HCI_DM_GETDATA 0x10 +#define ST_NCI_HCI_DM_PUTDATA 0x11 +#define ST_NCI_HCI_DM_LOAD 0x12 +#define ST_NCI_HCI_DM_GETINFO 0x13 +#define ST_NCI_HCI_DM_FWUPD_START 0x14 +#define ST_NCI_HCI_DM_FWUPD_STOP 0x15 +#define ST_NCI_HCI_DM_UPDATE_AID 0x20 +#define ST_NCI_HCI_DM_RESET 0x3e + +#define ST_NCI_HCI_DM_FIELD_GENERATOR 0x32 +#define ST_NCI_HCI_DM_VDC_MEASUREMENT_VALUE 0x33 +#define ST_NCI_HCI_DM_VDC_VALUE_COMPARISON 0x34 + +#define ST_NCI_FACTORY_MODE_ON 1 +#define ST_NCI_FACTORY_MODE_OFF 0 + +#define ST_NCI_EVT_POST_DATA 0x02 + +struct get_param_data { + u8 gate; + u8 data; +} __packed; + +static int st_nci_factory_mode(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nci_dev *ndev = nfc_get_drvdata(dev); + struct st_nci_info *info = nci_get_drvdata(ndev); + + if (data_len != 1) + return -EINVAL; + + pr_debug("factory mode: %x\n", ((u8 *)data)[0]); + + switch (((u8 *)data)[0]) { + case ST_NCI_FACTORY_MODE_ON: + test_and_set_bit(ST_NCI_FACTORY_MODE, &info->flags); + break; + case ST_NCI_FACTORY_MODE_OFF: + clear_bit(ST_NCI_FACTORY_MODE, &info->flags); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int st_nci_hci_clear_all_pipes(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nci_dev *ndev = nfc_get_drvdata(dev); + + return nci_hci_clear_all_pipes(ndev); +} + +static int st_nci_hci_dm_put_data(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nci_dev *ndev = nfc_get_drvdata(dev); + + return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, + ST_NCI_HCI_DM_PUTDATA, data, + data_len, NULL); +} + +static int st_nci_hci_dm_update_aid(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nci_dev *ndev = nfc_get_drvdata(dev); + + return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, + ST_NCI_HCI_DM_UPDATE_AID, data, data_len, NULL); +} + +static int st_nci_hci_dm_get_info(struct nfc_dev *dev, void *data, + size_t data_len) +{ + int r; + struct sk_buff *msg, *skb; + struct nci_dev *ndev = nfc_get_drvdata(dev); + + r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, ST_NCI_HCI_DM_GETINFO, + data, data_len, &skb); + if (r) + goto exit; + + msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI, + HCI_DM_GET_INFO, skb->len); + if (!msg) { + r = -ENOMEM; + goto free_skb; + } + + if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) { + kfree_skb(msg); + r = -ENOBUFS; + goto free_skb; + } + + r = nfc_vendor_cmd_reply(msg); + +free_skb: + kfree_skb(skb); +exit: + return r; +} + +static int st_nci_hci_dm_get_data(struct nfc_dev *dev, void *data, + size_t data_len) +{ + int r; + struct sk_buff *msg, *skb; + struct nci_dev *ndev = nfc_get_drvdata(dev); + + r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, ST_NCI_HCI_DM_GETDATA, + data, data_len, &skb); + if (r) + goto exit; + + msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI, + HCI_DM_GET_DATA, skb->len); + if (!msg) { + r = -ENOMEM; + goto free_skb; + } + + if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) { + kfree_skb(msg); + r = -ENOBUFS; + goto free_skb; + } + + r = nfc_vendor_cmd_reply(msg); + +free_skb: + kfree_skb(skb); +exit: + return r; +} + +static int st_nci_hci_dm_fwupd_start(struct nfc_dev *dev, void *data, + size_t data_len) +{ + int r; + struct nci_dev *ndev = nfc_get_drvdata(dev); + + dev->fw_download_in_progress = true; + r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, + ST_NCI_HCI_DM_FWUPD_START, data, data_len, NULL); + if (r) + dev->fw_download_in_progress = false; + + return r; +} + +static int st_nci_hci_dm_fwupd_end(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nci_dev *ndev = nfc_get_drvdata(dev); + + return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, + ST_NCI_HCI_DM_FWUPD_STOP, data, data_len, NULL); +} + +static int st_nci_hci_dm_direct_load(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nci_dev *ndev = nfc_get_drvdata(dev); + + if (dev->fw_download_in_progress) { + dev->fw_download_in_progress = false; + return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, + ST_NCI_HCI_DM_LOAD, data, data_len, NULL); + } + return -EPROTO; +} + +static int st_nci_hci_dm_reset(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nci_dev *ndev = nfc_get_drvdata(dev); + + nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, + ST_NCI_HCI_DM_RESET, data, data_len, NULL); + msleep(200); + + return 0; +} + +static int st_nci_hci_get_param(struct nfc_dev *dev, void *data, + size_t data_len) +{ + int r; + struct sk_buff *msg, *skb; + struct nci_dev *ndev = nfc_get_drvdata(dev); + struct get_param_data *param = (struct get_param_data *)data; + + if (data_len < sizeof(struct get_param_data)) + return -EPROTO; + + r = nci_hci_get_param(ndev, param->gate, param->data, &skb); + if (r) + goto exit; + + msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI, + HCI_GET_PARAM, skb->len); + if (!msg) { + r = -ENOMEM; + goto free_skb; + } + + if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) { + kfree_skb(msg); + r = -ENOBUFS; + goto free_skb; + } + + r = nfc_vendor_cmd_reply(msg); + +free_skb: + kfree_skb(skb); +exit: + return r; +} + +static int st_nci_hci_dm_field_generator(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nci_dev *ndev = nfc_get_drvdata(dev); + + return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, + ST_NCI_HCI_DM_FIELD_GENERATOR, data, data_len, NULL); +} + +static int st_nci_hci_dm_vdc_measurement_value(struct nfc_dev *dev, void *data, + size_t data_len) +{ + int r; + struct sk_buff *msg, *skb; + struct nci_dev *ndev = nfc_get_drvdata(dev); + + if (data_len != 4) + return -EPROTO; + + r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, + ST_NCI_HCI_DM_VDC_MEASUREMENT_VALUE, + data, data_len, &skb); + if (r) + goto exit; + + msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI, + HCI_DM_VDC_MEASUREMENT_VALUE, skb->len); + if (!msg) { + r = -ENOMEM; + goto free_skb; + } + + if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) { + kfree_skb(msg); + r = -ENOBUFS; + goto free_skb; + } + + r = nfc_vendor_cmd_reply(msg); + +free_skb: + kfree_skb(skb); +exit: + return r; +} + +static int st_nci_hci_dm_vdc_value_comparison(struct nfc_dev *dev, void *data, + size_t data_len) +{ + int r; + struct sk_buff *msg, *skb; + struct nci_dev *ndev = nfc_get_drvdata(dev); + + if (data_len != 2) + return -EPROTO; + + r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, + ST_NCI_HCI_DM_VDC_VALUE_COMPARISON, + data, data_len, &skb); + if (r) + goto exit; + + msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI, + HCI_DM_VDC_VALUE_COMPARISON, skb->len); + if (!msg) { + r = -ENOMEM; + goto free_skb; + } + + if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) { + kfree_skb(msg); + r = -ENOBUFS; + goto free_skb; + } + + r = nfc_vendor_cmd_reply(msg); + +free_skb: + kfree_skb(skb); +exit: + return r; +} + +static int st_nci_loopback(struct nfc_dev *dev, void *data, + size_t data_len) +{ + int r; + struct sk_buff *msg, *skb; + struct nci_dev *ndev = nfc_get_drvdata(dev); + + if (data_len <= 0) + return -EPROTO; + + r = nci_nfcc_loopback(ndev, data, data_len, &skb); + if (r < 0) + return r; + + msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI, + LOOPBACK, skb->len); + if (!msg) { + r = -ENOMEM; + goto free_skb; + } + + if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) { + kfree_skb(msg); + r = -ENOBUFS; + goto free_skb; + } + + r = nfc_vendor_cmd_reply(msg); +free_skb: + kfree_skb(skb); + return r; +} + +static int st_nci_manufacturer_specific(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct sk_buff *msg; + struct nci_dev *ndev = nfc_get_drvdata(dev); + + msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI, + MANUFACTURER_SPECIFIC, + sizeof(ndev->manufact_specific_info)); + if (!msg) + return -ENOMEM; + + if (nla_put(msg, NFC_ATTR_VENDOR_DATA, sizeof(ndev->manufact_specific_info), + &ndev->manufact_specific_info)) { + kfree_skb(msg); + return -ENOBUFS; + } + + return nfc_vendor_cmd_reply(msg); +} + +static struct nfc_vendor_cmd st_nci_vendor_cmds[] = { + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = FACTORY_MODE, + .doit = st_nci_factory_mode, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = HCI_CLEAR_ALL_PIPES, + .doit = st_nci_hci_clear_all_pipes, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = HCI_DM_PUT_DATA, + .doit = st_nci_hci_dm_put_data, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = HCI_DM_UPDATE_AID, + .doit = st_nci_hci_dm_update_aid, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = HCI_DM_GET_INFO, + .doit = st_nci_hci_dm_get_info, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = HCI_DM_GET_DATA, + .doit = st_nci_hci_dm_get_data, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = HCI_DM_DIRECT_LOAD, + .doit = st_nci_hci_dm_direct_load, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = HCI_DM_RESET, + .doit = st_nci_hci_dm_reset, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = HCI_GET_PARAM, + .doit = st_nci_hci_get_param, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = HCI_DM_FIELD_GENERATOR, + .doit = st_nci_hci_dm_field_generator, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = HCI_DM_FWUPD_START, + .doit = st_nci_hci_dm_fwupd_start, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = HCI_DM_FWUPD_END, + .doit = st_nci_hci_dm_fwupd_end, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = LOOPBACK, + .doit = st_nci_loopback, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = HCI_DM_VDC_MEASUREMENT_VALUE, + .doit = st_nci_hci_dm_vdc_measurement_value, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = HCI_DM_VDC_VALUE_COMPARISON, + .doit = st_nci_hci_dm_vdc_value_comparison, + }, + { + .vendor_id = ST_NCI_VENDOR_OUI, + .subcmd = MANUFACTURER_SPECIFIC, + .doit = st_nci_manufacturer_specific, + }, +}; + +int st_nci_vendor_cmds_init(struct nci_dev *ndev) +{ + return nfc_set_vendor_cmds(ndev->nfc_dev, st_nci_vendor_cmds, + sizeof(st_nci_vendor_cmds)); +} +EXPORT_SYMBOL(st_nci_vendor_cmds_init); diff --git a/drivers/nfc/st21nfca/Kconfig b/drivers/nfc/st21nfca/Kconfig new file mode 100644 index 0000000..e86e47a --- /dev/null +++ b/drivers/nfc/st21nfca/Kconfig @@ -0,0 +1,21 @@ +config NFC_ST21NFCA + tristate + depends on m + depends on CRC_CCITT + ---help--- + STMicroelectronics ST21NFCA core driver. It implements the chipset + HCI logic and hooks into the NFC kernel APIs. Physical layers will + register against it. + +config NFC_ST21NFCA_I2C + depends on !KERNEL_3_18 + tristate "STMicroelectronics ST21NFCA NFC driver (I2C)" + depends on m + depends on NFC_HCI && I2C && NFC_SHDLC + select NFC_ST21NFCA + ---help--- + This module adds support for the STMicroelectronics st21nfca i2c interface. + Select this if your platform is using the i2c bus. + + If you choose to build a module, it'll be called st21nfca_i2c. + Say N if unsure. diff --git a/drivers/nfc/st21nfca/Makefile b/drivers/nfc/st21nfca/Makefile new file mode 100644 index 0000000..f76b5ad --- /dev/null +++ b/drivers/nfc/st21nfca/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for ST21NFCA HCI based NFC driver +# + +st21nfca_hci-objs = core.o dep.o se.o vendor_cmds.o +obj-$(CPTCFG_NFC_ST21NFCA) += st21nfca_hci.o + +st21nfca_i2c-objs = i2c.o +obj-$(CPTCFG_NFC_ST21NFCA_I2C) += st21nfca_i2c.o diff --git a/drivers/nfc/st21nfca/core.c b/drivers/nfc/st21nfca/core.c new file mode 100644 index 0000000..dacb916 --- /dev/null +++ b/drivers/nfc/st21nfca/core.c @@ -0,0 +1,1049 @@ +/* + * HCI based Driver for STMicroelectronics NFC Chip + * + * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/nfc.h> +#include <net/nfc/hci.h> +#include <net/nfc/llc.h> + +#include "st21nfca.h" + +#define DRIVER_DESC "HCI NFC driver for ST21NFCA" + +#define FULL_VERSION_LEN 3 + +/* Proprietary gates, events, commands and registers */ + +/* Commands that apply to all RF readers */ +#define ST21NFCA_RF_READER_CMD_PRESENCE_CHECK 0x30 + +#define ST21NFCA_RF_READER_ISO15693_GATE 0x12 +#define ST21NFCA_RF_READER_ISO15693_INVENTORY 0x01 + +/* + * Reader gate for communication with contact-less cards using Type A + * protocol ISO14443-3 but not compliant with ISO14443-4 + */ +#define ST21NFCA_RF_READER_14443_3_A_GATE 0x15 +#define ST21NFCA_RF_READER_14443_3_A_UID 0x02 +#define ST21NFCA_RF_READER_14443_3_A_ATQA 0x03 +#define ST21NFCA_RF_READER_14443_3_A_SAK 0x04 + +#define ST21NFCA_RF_READER_F_DATARATE 0x01 +#define ST21NFCA_RF_READER_F_DATARATE_106 0x01 +#define ST21NFCA_RF_READER_F_DATARATE_212 0x02 +#define ST21NFCA_RF_READER_F_DATARATE_424 0x04 +#define ST21NFCA_RF_READER_F_POL_REQ 0x02 +#define ST21NFCA_RF_READER_F_POL_REQ_DEFAULT 0xffff0000 +#define ST21NFCA_RF_READER_F_NFCID2 0x03 +#define ST21NFCA_RF_READER_F_NFCID1 0x04 + +#define ST21NFCA_RF_CARD_F_MODE 0x01 +#define ST21NFCA_RF_CARD_F_NFCID2_LIST 0x04 +#define ST21NFCA_RF_CARD_F_NFCID1 0x05 +#define ST21NFCA_RF_CARD_F_SENS_RES 0x06 +#define ST21NFCA_RF_CARD_F_SEL_RES 0x07 +#define ST21NFCA_RF_CARD_F_DATARATE 0x08 +#define ST21NFCA_RF_CARD_F_DATARATE_212_424 0x01 + +#define ST21NFCA_DEVICE_MGNT_PIPE 0x02 + +#define ST21NFCA_DM_GETINFO 0x13 +#define ST21NFCA_DM_GETINFO_PIPE_LIST 0x02 +#define ST21NFCA_DM_GETINFO_PIPE_INFO 0x01 +#define ST21NFCA_DM_PIPE_CREATED 0x02 +#define ST21NFCA_DM_PIPE_OPEN 0x04 +#define ST21NFCA_DM_RF_ACTIVE 0x80 +#define ST21NFCA_DM_DISCONNECT 0x30 + +#define ST21NFCA_DM_IS_PIPE_OPEN(p) \ + ((p & 0x0f) == (ST21NFCA_DM_PIPE_CREATED | ST21NFCA_DM_PIPE_OPEN)) + +#define ST21NFCA_NFC_MODE 0x03 /* NFC_MODE parameter*/ + +#define ST21NFCA_EVT_HOT_PLUG 0x03 +#define ST21NFCA_EVT_HOT_PLUG_IS_INHIBITED(x) (x->data[0] & 0x80) + +#define ST21NFCA_SE_TO_PIPES 2000 + +static DECLARE_BITMAP(dev_mask, ST21NFCA_NUM_DEVICES); + +static struct nfc_hci_gate st21nfca_gates[] = { + {NFC_HCI_ADMIN_GATE, NFC_HCI_ADMIN_PIPE}, + {NFC_HCI_LINK_MGMT_GATE, NFC_HCI_LINK_MGMT_PIPE}, + {ST21NFCA_DEVICE_MGNT_GATE, ST21NFCA_DEVICE_MGNT_PIPE}, + + {NFC_HCI_LOOPBACK_GATE, NFC_HCI_INVALID_PIPE}, + {NFC_HCI_ID_MGMT_GATE, NFC_HCI_INVALID_PIPE}, + {NFC_HCI_RF_READER_B_GATE, NFC_HCI_INVALID_PIPE}, + {NFC_HCI_RF_READER_A_GATE, NFC_HCI_INVALID_PIPE}, + {ST21NFCA_RF_READER_F_GATE, NFC_HCI_INVALID_PIPE}, + {ST21NFCA_RF_READER_14443_3_A_GATE, NFC_HCI_INVALID_PIPE}, + {ST21NFCA_RF_READER_ISO15693_GATE, NFC_HCI_INVALID_PIPE}, + {ST21NFCA_RF_CARD_F_GATE, NFC_HCI_INVALID_PIPE}, + + /* Secure element pipes are created by secure element host */ + {ST21NFCA_CONNECTIVITY_GATE, NFC_HCI_DO_NOT_CREATE_PIPE}, + {ST21NFCA_APDU_READER_GATE, NFC_HCI_DO_NOT_CREATE_PIPE}, +}; + +struct st21nfca_pipe_info { + u8 pipe_state; + u8 src_host_id; + u8 src_gate_id; + u8 dst_host_id; + u8 dst_gate_id; +} __packed; + +/* Largest headroom needed for outgoing custom commands */ +#define ST21NFCA_CMDS_HEADROOM 7 + +static int st21nfca_hci_load_session(struct nfc_hci_dev *hdev) +{ + int i, j, r; + struct sk_buff *skb_pipe_list, *skb_pipe_info; + struct st21nfca_pipe_info *info; + + u8 pipe_list[] = { ST21NFCA_DM_GETINFO_PIPE_LIST, + NFC_HCI_TERMINAL_HOST_ID + }; + u8 pipe_info[] = { ST21NFCA_DM_GETINFO_PIPE_INFO, + NFC_HCI_TERMINAL_HOST_ID, 0 + }; + + /* On ST21NFCA device pipes number are dynamics + * A maximum of 16 pipes can be created at the same time + * If pipes are already created, hci_dev_up will fail. + * Doing a clear all pipe is a bad idea because: + * - It does useless EEPROM cycling + * - It might cause issue for secure elements support + * (such as removing connectivity or APDU reader pipe) + * A better approach on ST21NFCA is to: + * - get a pipe list for each host. + * (eg: NFC_HCI_HOST_CONTROLLER_ID for now). + * (TODO Later on UICC HOST and eSE HOST) + * - get pipe information + * - match retrieved pipe list in st21nfca_gates + * ST21NFCA_DEVICE_MGNT_GATE is a proprietary gate + * with ST21NFCA_DEVICE_MGNT_PIPE. + * Pipe can be closed and need to be open. + */ + r = nfc_hci_connect_gate(hdev, NFC_HCI_HOST_CONTROLLER_ID, + ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_DEVICE_MGNT_PIPE); + if (r < 0) + return r; + + /* Get pipe list */ + r = nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_DM_GETINFO, pipe_list, sizeof(pipe_list), + &skb_pipe_list); + if (r < 0) + return r; + + /* Complete the existing gate_pipe table */ + for (i = 0; i < skb_pipe_list->len; i++) { + pipe_info[2] = skb_pipe_list->data[i]; + r = nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_DM_GETINFO, pipe_info, + sizeof(pipe_info), &skb_pipe_info); + if (r) + continue; + + /* + * Match pipe ID and gate ID + * Output format from ST21NFC_DM_GETINFO is: + * - pipe state (1byte) + * - source hid (1byte) + * - source gid (1byte) + * - destination hid (1byte) + * - destination gid (1byte) + */ + info = (struct st21nfca_pipe_info *) skb_pipe_info->data; + if (info->dst_gate_id == ST21NFCA_APDU_READER_GATE && + info->src_host_id == NFC_HCI_UICC_HOST_ID) { + pr_err("Unexpected apdu_reader pipe on host %x\n", + info->src_host_id); + kfree_skb(skb_pipe_info); + continue; + } + + for (j = 3; (j < ARRAY_SIZE(st21nfca_gates)) && + (st21nfca_gates[j].gate != info->dst_gate_id) ; j++) + ; + + if (j < ARRAY_SIZE(st21nfca_gates) && + st21nfca_gates[j].gate == info->dst_gate_id && + ST21NFCA_DM_IS_PIPE_OPEN(info->pipe_state)) { + hdev->init_data.gates[j].pipe = pipe_info[2]; + + hdev->gate2pipe[st21nfca_gates[j].gate] = + pipe_info[2]; + hdev->pipes[pipe_info[2]].gate = + st21nfca_gates[j].gate; + hdev->pipes[pipe_info[2]].dest_host = + info->src_host_id; + } + kfree_skb(skb_pipe_info); + } + + /* + * 3 gates have a well known pipe ID. Only NFC_HCI_LINK_MGMT_GATE + * is not yet open at this stage. + */ + r = nfc_hci_connect_gate(hdev, NFC_HCI_HOST_CONTROLLER_ID, + NFC_HCI_LINK_MGMT_GATE, + NFC_HCI_LINK_MGMT_PIPE); + + kfree_skb(skb_pipe_list); + return r; +} + +static int st21nfca_hci_open(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + int r; + + mutex_lock(&info->info_lock); + + if (info->state != ST21NFCA_ST_COLD) { + r = -EBUSY; + goto out; + } + + r = info->phy_ops->enable(info->phy_id); + + if (r == 0) + info->state = ST21NFCA_ST_READY; + +out: + mutex_unlock(&info->info_lock); + return r; +} + +static void st21nfca_hci_close(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + mutex_lock(&info->info_lock); + + if (info->state == ST21NFCA_ST_COLD) + goto out; + + info->phy_ops->disable(info->phy_id); + info->state = ST21NFCA_ST_COLD; + +out: + mutex_unlock(&info->info_lock); +} + +static int st21nfca_hci_ready(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + struct sk_buff *skb; + + u8 param; + u8 white_list[2]; + int wl_size = 0; + int r; + + if (info->se_status->is_uicc_present) + white_list[wl_size++] = NFC_HCI_UICC_HOST_ID; + if (info->se_status->is_ese_present) + white_list[wl_size++] = ST21NFCA_ESE_HOST_ID; + + if (wl_size) { + r = nfc_hci_set_param(hdev, NFC_HCI_ADMIN_GATE, + NFC_HCI_ADMIN_WHITELIST, + (u8 *) &white_list, wl_size); + if (r < 0) + return r; + } + + /* Set NFC_MODE in device management gate to enable */ + r = nfc_hci_get_param(hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_NFC_MODE, &skb); + if (r < 0) + return r; + + param = skb->data[0]; + kfree_skb(skb); + if (param == 0) { + param = 1; + + r = nfc_hci_set_param(hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_NFC_MODE, ¶m, 1); + if (r < 0) + return r; + } + + r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE, + NFC_HCI_EVT_END_OPERATION, NULL, 0); + if (r < 0) + return r; + + r = nfc_hci_get_param(hdev, NFC_HCI_ID_MGMT_GATE, + NFC_HCI_ID_MGMT_VERSION_SW, &skb); + if (r < 0) + return r; + + if (skb->len != FULL_VERSION_LEN) { + kfree_skb(skb); + return -EINVAL; + } + + print_hex_dump(KERN_DEBUG, "FULL VERSION SOFTWARE INFO: ", + DUMP_PREFIX_NONE, 16, 1, + skb->data, FULL_VERSION_LEN, false); + + kfree_skb(skb); + + return 0; +} + +static int st21nfca_hci_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + return info->phy_ops->write(info->phy_id, skb); +} + +static int st21nfca_hci_start_poll(struct nfc_hci_dev *hdev, + u32 im_protocols, u32 tm_protocols) +{ + int r; + u32 pol_req; + u8 param[19]; + struct sk_buff *datarate_skb; + + pr_info(DRIVER_DESC ": %s protocols 0x%x 0x%x\n", + __func__, im_protocols, tm_protocols); + + r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE, + NFC_HCI_EVT_END_OPERATION, NULL, 0); + if (r < 0) + return r; + if (im_protocols) { + /* + * enable polling according to im_protocols & tm_protocols + * - CLOSE pipe according to im_protocols & tm_protocols + */ + if ((NFC_HCI_RF_READER_B_GATE & im_protocols) == 0) { + r = nfc_hci_disconnect_gate(hdev, + NFC_HCI_RF_READER_B_GATE); + if (r < 0) + return r; + } + + if ((NFC_HCI_RF_READER_A_GATE & im_protocols) == 0) { + r = nfc_hci_disconnect_gate(hdev, + NFC_HCI_RF_READER_A_GATE); + if (r < 0) + return r; + } + + if ((ST21NFCA_RF_READER_F_GATE & im_protocols) == 0) { + r = nfc_hci_disconnect_gate(hdev, + ST21NFCA_RF_READER_F_GATE); + if (r < 0) + return r; + } else { + hdev->gb = nfc_get_local_general_bytes(hdev->ndev, + &hdev->gb_len); + + if (hdev->gb == NULL || hdev->gb_len == 0) { + im_protocols &= ~NFC_PROTO_NFC_DEP_MASK; + tm_protocols &= ~NFC_PROTO_NFC_DEP_MASK; + } + + param[0] = ST21NFCA_RF_READER_F_DATARATE_106 | + ST21NFCA_RF_READER_F_DATARATE_212 | + ST21NFCA_RF_READER_F_DATARATE_424; + r = nfc_hci_set_param(hdev, ST21NFCA_RF_READER_F_GATE, + ST21NFCA_RF_READER_F_DATARATE, + param, 1); + if (r < 0) + return r; + + pol_req = be32_to_cpu((__force __be32) + ST21NFCA_RF_READER_F_POL_REQ_DEFAULT); + r = nfc_hci_set_param(hdev, ST21NFCA_RF_READER_F_GATE, + ST21NFCA_RF_READER_F_POL_REQ, + (u8 *) &pol_req, 4); + if (r < 0) + return r; + } + + if ((ST21NFCA_RF_READER_14443_3_A_GATE & im_protocols) == 0) { + r = nfc_hci_disconnect_gate(hdev, + ST21NFCA_RF_READER_14443_3_A_GATE); + if (r < 0) + return r; + } + + if ((ST21NFCA_RF_READER_ISO15693_GATE & im_protocols) == 0) { + r = nfc_hci_disconnect_gate(hdev, + ST21NFCA_RF_READER_ISO15693_GATE); + if (r < 0) + return r; + } + + r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE, + NFC_HCI_EVT_READER_REQUESTED, NULL, 0); + if (r < 0) + nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE, + NFC_HCI_EVT_END_OPERATION, NULL, 0); + } + + if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) { + r = nfc_hci_get_param(hdev, ST21NFCA_RF_CARD_F_GATE, + ST21NFCA_RF_CARD_F_DATARATE, + &datarate_skb); + if (r < 0) + return r; + + /* Configure the maximum supported datarate to 424Kbps */ + if (datarate_skb->len > 0 && + datarate_skb->data[0] != + ST21NFCA_RF_CARD_F_DATARATE_212_424) { + param[0] = ST21NFCA_RF_CARD_F_DATARATE_212_424; + r = nfc_hci_set_param(hdev, ST21NFCA_RF_CARD_F_GATE, + ST21NFCA_RF_CARD_F_DATARATE, + param, 1); + if (r < 0) { + kfree_skb(datarate_skb); + return r; + } + } + kfree_skb(datarate_skb); + + /* + * Configure sens_res + * + * NFC Forum Digital Spec Table 7: + * NFCID1 size: triple (10 bytes) + */ + param[0] = 0x00; + param[1] = 0x08; + r = nfc_hci_set_param(hdev, ST21NFCA_RF_CARD_F_GATE, + ST21NFCA_RF_CARD_F_SENS_RES, param, 2); + if (r < 0) + return r; + + /* + * Configure sel_res + * + * NFC Forum Digistal Spec Table 17: + * b3 set to 0b (value b7-b6): + * - 10b: Configured for NFC-DEP Protocol + */ + param[0] = 0x40; + r = nfc_hci_set_param(hdev, ST21NFCA_RF_CARD_F_GATE, + ST21NFCA_RF_CARD_F_SEL_RES, param, 1); + if (r < 0) + return r; + + /* Configure NFCID1 Random uid */ + r = nfc_hci_set_param(hdev, ST21NFCA_RF_CARD_F_GATE, + ST21NFCA_RF_CARD_F_NFCID1, NULL, 0); + if (r < 0) + return r; + + /* Configure NFCID2_LIST */ + /* System Code */ + param[0] = 0x00; + param[1] = 0x00; + /* NFCID2 */ + param[2] = 0x01; + param[3] = 0xfe; + param[4] = 'S'; + param[5] = 'T'; + param[6] = 'M'; + param[7] = 'i'; + param[8] = 'c'; + param[9] = 'r'; + /* 8 byte Pad bytes used for polling respone frame */ + + /* + * Configuration byte: + * - bit 0: define the default NFCID2 entry used when the + * system code is equal to 'FFFF' + * - bit 1: use a random value for lowest 6 bytes of + * NFCID2 value + * - bit 2: ignore polling request frame if request code + * is equal to '01' + * - Other bits are RFU + */ + param[18] = 0x01; + r = nfc_hci_set_param(hdev, ST21NFCA_RF_CARD_F_GATE, + ST21NFCA_RF_CARD_F_NFCID2_LIST, param, + 19); + if (r < 0) + return r; + + param[0] = 0x02; + r = nfc_hci_set_param(hdev, ST21NFCA_RF_CARD_F_GATE, + ST21NFCA_RF_CARD_F_MODE, param, 1); + } + + return r; +} + +static void st21nfca_hci_stop_poll(struct nfc_hci_dev *hdev) +{ + nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_DM_DISCONNECT, NULL, 0, NULL); +} + +static int st21nfca_get_iso14443_3_atqa(struct nfc_hci_dev *hdev, u16 *atqa) +{ + int r; + struct sk_buff *atqa_skb = NULL; + + r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_14443_3_A_GATE, + ST21NFCA_RF_READER_14443_3_A_ATQA, &atqa_skb); + if (r < 0) + goto exit; + + if (atqa_skb->len != 2) { + r = -EPROTO; + goto exit; + } + + *atqa = be16_to_cpu(*(__be16 *) atqa_skb->data); + +exit: + kfree_skb(atqa_skb); + return r; +} + +static int st21nfca_get_iso14443_3_sak(struct nfc_hci_dev *hdev, u8 *sak) +{ + int r; + struct sk_buff *sak_skb = NULL; + + r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_14443_3_A_GATE, + ST21NFCA_RF_READER_14443_3_A_SAK, &sak_skb); + if (r < 0) + goto exit; + + if (sak_skb->len != 1) { + r = -EPROTO; + goto exit; + } + + *sak = sak_skb->data[0]; + +exit: + kfree_skb(sak_skb); + return r; +} + +static int st21nfca_get_iso14443_3_uid(struct nfc_hci_dev *hdev, u8 *uid, + int *len) +{ + int r; + struct sk_buff *uid_skb = NULL; + + r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_14443_3_A_GATE, + ST21NFCA_RF_READER_14443_3_A_UID, &uid_skb); + if (r < 0) + goto exit; + + if (uid_skb->len == 0 || uid_skb->len > NFC_NFCID1_MAXSIZE) { + r = -EPROTO; + goto exit; + } + + memcpy(uid, uid_skb->data, uid_skb->len); + *len = uid_skb->len; +exit: + kfree_skb(uid_skb); + return r; +} + +static int st21nfca_get_iso15693_inventory(struct nfc_hci_dev *hdev, + struct nfc_target *target) +{ + int r; + struct sk_buff *inventory_skb = NULL; + + r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_ISO15693_GATE, + ST21NFCA_RF_READER_ISO15693_INVENTORY, + &inventory_skb); + if (r < 0) + goto exit; + + skb_pull(inventory_skb, 2); + + if (inventory_skb->len == 0 || + inventory_skb->len > NFC_ISO15693_UID_MAXSIZE) { + r = -EPROTO; + goto exit; + } + + memcpy(target->iso15693_uid, inventory_skb->data, inventory_skb->len); + target->iso15693_dsfid = inventory_skb->data[1]; + target->is_iso15693 = 1; +exit: + kfree_skb(inventory_skb); + return r; +} + +static int st21nfca_hci_dep_link_up(struct nfc_hci_dev *hdev, + struct nfc_target *target, u8 comm_mode, + u8 *gb, size_t gb_len) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + info->dep_info.idx = target->idx; + return st21nfca_im_send_atr_req(hdev, gb, gb_len); +} + +static int st21nfca_hci_dep_link_down(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + info->state = ST21NFCA_ST_READY; + + return nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_DM_DISCONNECT, NULL, 0, NULL); +} + +static int st21nfca_hci_target_from_gate(struct nfc_hci_dev *hdev, u8 gate, + struct nfc_target *target) +{ + int r, len; + u16 atqa; + u8 sak; + u8 uid[NFC_NFCID1_MAXSIZE]; + + switch (gate) { + case ST21NFCA_RF_READER_F_GATE: + target->supported_protocols = NFC_PROTO_FELICA_MASK; + break; + case ST21NFCA_RF_READER_14443_3_A_GATE: + /* ISO14443-3 type 1 or 2 tags */ + r = st21nfca_get_iso14443_3_atqa(hdev, &atqa); + if (r < 0) + return r; + if (atqa == 0x000c) { + target->supported_protocols = NFC_PROTO_JEWEL_MASK; + target->sens_res = 0x0c00; + } else { + r = st21nfca_get_iso14443_3_sak(hdev, &sak); + if (r < 0) + return r; + + r = st21nfca_get_iso14443_3_uid(hdev, uid, &len); + if (r < 0) + return r; + + target->supported_protocols = + nfc_hci_sak_to_protocol(sak); + if (target->supported_protocols == 0xffffffff) + return -EPROTO; + + target->sens_res = atqa; + target->sel_res = sak; + memcpy(target->nfcid1, uid, len); + target->nfcid1_len = len; + } + + break; + case ST21NFCA_RF_READER_ISO15693_GATE: + target->supported_protocols = NFC_PROTO_ISO15693_MASK; + r = st21nfca_get_iso15693_inventory(hdev, target); + if (r < 0) + return r; + break; + default: + return -EPROTO; + } + + return 0; +} + +static int st21nfca_hci_complete_target_discovered(struct nfc_hci_dev *hdev, + u8 gate, + struct nfc_target *target) +{ + int r; + struct sk_buff *nfcid_skb = NULL; + + if (gate == ST21NFCA_RF_READER_F_GATE) { + r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_F_GATE, + ST21NFCA_RF_READER_F_NFCID2, &nfcid_skb); + if (r < 0) + goto exit; + + if (nfcid_skb->len > NFC_SENSF_RES_MAXSIZE) { + r = -EPROTO; + goto exit; + } + + /* + * - After the recepton of polling response for type F frame + * at 212 or 424 Kbit/s, NFCID2 registry parameters will be + * updated. + * - After the reception of SEL_RES with NFCIP-1 compliant bit + * set for type A frame NFCID1 will be updated + */ + if (nfcid_skb->len > 0) { + /* P2P in type F */ + memcpy(target->sensf_res, nfcid_skb->data, + nfcid_skb->len); + target->sensf_res_len = nfcid_skb->len; + /* NFC Forum Digital Protocol Table 44 */ + if (target->sensf_res[0] == 0x01 && + target->sensf_res[1] == 0xfe) + target->supported_protocols = + NFC_PROTO_NFC_DEP_MASK; + else + target->supported_protocols = + NFC_PROTO_FELICA_MASK; + } else { + kfree_skb(nfcid_skb); + /* P2P in type A */ + r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_F_GATE, + ST21NFCA_RF_READER_F_NFCID1, + &nfcid_skb); + if (r < 0) + goto exit; + + if (nfcid_skb->len > NFC_NFCID1_MAXSIZE) { + r = -EPROTO; + goto exit; + } + memcpy(target->sensf_res, nfcid_skb->data, + nfcid_skb->len); + target->sensf_res_len = nfcid_skb->len; + target->supported_protocols = NFC_PROTO_NFC_DEP_MASK; + } + target->hci_reader_gate = ST21NFCA_RF_READER_F_GATE; + } + r = 1; +exit: + kfree_skb(nfcid_skb); + return r; +} + +#define ST21NFCA_CB_TYPE_READER_ISO15693 1 +static void st21nfca_hci_data_exchange_cb(void *context, struct sk_buff *skb, + int err) +{ + struct st21nfca_hci_info *info = context; + + switch (info->async_cb_type) { + case ST21NFCA_CB_TYPE_READER_ISO15693: + if (err == 0) + skb_trim(skb, skb->len - 1); + info->async_cb(info->async_cb_context, skb, err); + break; + default: + if (err == 0) + kfree_skb(skb); + break; + } +} + +/* + * Returns: + * <= 0: driver handled the data exchange + * 1: driver doesn't especially handle, please do standard processing + */ +static int st21nfca_hci_im_transceive(struct nfc_hci_dev *hdev, + struct nfc_target *target, + struct sk_buff *skb, + data_exchange_cb_t cb, void *cb_context) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + pr_info(DRIVER_DESC ": %s for gate=%d len=%d\n", __func__, + target->hci_reader_gate, skb->len); + + switch (target->hci_reader_gate) { + case ST21NFCA_RF_READER_F_GATE: + if (target->supported_protocols == NFC_PROTO_NFC_DEP_MASK) + return st21nfca_im_send_dep_req(hdev, skb); + + *skb_push(skb, 1) = 0x1a; + return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate, + ST21NFCA_WR_XCHG_DATA, skb->data, + skb->len, cb, cb_context); + case ST21NFCA_RF_READER_14443_3_A_GATE: + *skb_push(skb, 1) = 0x1a; /* CTR, see spec:10.2.2.1 */ + + return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate, + ST21NFCA_WR_XCHG_DATA, skb->data, + skb->len, cb, cb_context); + case ST21NFCA_RF_READER_ISO15693_GATE: + info->async_cb_type = ST21NFCA_CB_TYPE_READER_ISO15693; + info->async_cb = cb; + info->async_cb_context = cb_context; + + *skb_push(skb, 1) = 0x17; + + return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate, + ST21NFCA_WR_XCHG_DATA, skb->data, + skb->len, + st21nfca_hci_data_exchange_cb, + info); + break; + default: + return 1; + } +} + +static int st21nfca_hci_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + return st21nfca_tm_send_dep_res(hdev, skb); +} + +static int st21nfca_hci_check_presence(struct nfc_hci_dev *hdev, + struct nfc_target *target) +{ + u8 fwi = 0x11; + + switch (target->hci_reader_gate) { + case NFC_HCI_RF_READER_A_GATE: + case NFC_HCI_RF_READER_B_GATE: + /* + * PRESENCE_CHECK on those gates is available + * However, the answer to this command is taking 3 * fwi + * if the card is no present. + * Instead, we send an empty I-Frame with a very short + * configurable fwi ~604µs. + */ + return nfc_hci_send_cmd(hdev, target->hci_reader_gate, + ST21NFCA_WR_XCHG_DATA, &fwi, 1, NULL); + case ST21NFCA_RF_READER_14443_3_A_GATE: + return nfc_hci_send_cmd(hdev, target->hci_reader_gate, + ST21NFCA_RF_READER_CMD_PRESENCE_CHECK, + NULL, 0, NULL); + default: + return -EOPNOTSUPP; + } +} + +static void st21nfca_hci_cmd_received(struct nfc_hci_dev *hdev, u8 pipe, u8 cmd, + struct sk_buff *skb) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + u8 gate = hdev->pipes[pipe].gate; + + pr_debug("cmd: %x\n", cmd); + + switch (cmd) { + case NFC_HCI_ANY_OPEN_PIPE: + if (gate != ST21NFCA_APDU_READER_GATE && + hdev->pipes[pipe].dest_host != NFC_HCI_UICC_HOST_ID) + info->se_info.count_pipes++; + + if (info->se_info.count_pipes == info->se_info.expected_pipes) { + del_timer_sync(&info->se_info.se_active_timer); + info->se_info.se_active = false; + info->se_info.count_pipes = 0; + complete(&info->se_info.req_completion); + } + break; + } +} + +static int st21nfca_admin_event_received(struct nfc_hci_dev *hdev, u8 event, + struct sk_buff *skb) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + pr_debug("admin event: %x\n", event); + + switch (event) { + case ST21NFCA_EVT_HOT_PLUG: + if (info->se_info.se_active) { + if (!ST21NFCA_EVT_HOT_PLUG_IS_INHIBITED(skb)) { + del_timer_sync(&info->se_info.se_active_timer); + info->se_info.se_active = false; + complete(&info->se_info.req_completion); + } else { + mod_timer(&info->se_info.se_active_timer, + jiffies + + msecs_to_jiffies(ST21NFCA_SE_TO_PIPES)); + } + } + break; + default: + nfc_err(&hdev->ndev->dev, "Unexpected event on admin gate\n"); + } + kfree_skb(skb); + return 0; +} + +/* + * Returns: + * <= 0: driver handled the event, skb consumed + * 1: driver does not handle the event, please do standard processing + */ +static int st21nfca_hci_event_received(struct nfc_hci_dev *hdev, u8 pipe, + u8 event, struct sk_buff *skb) +{ + u8 gate = hdev->pipes[pipe].gate; + u8 host = hdev->pipes[pipe].dest_host; + + pr_debug("hci event: %d gate: %x\n", event, gate); + + switch (gate) { + case NFC_HCI_ADMIN_GATE: + return st21nfca_admin_event_received(hdev, event, skb); + case ST21NFCA_RF_CARD_F_GATE: + return st21nfca_dep_event_received(hdev, event, skb); + case ST21NFCA_CONNECTIVITY_GATE: + return st21nfca_connectivity_event_received(hdev, host, + event, skb); + case ST21NFCA_APDU_READER_GATE: + return st21nfca_apdu_reader_event_received(hdev, event, skb); + case NFC_HCI_LOOPBACK_GATE: + return st21nfca_hci_loopback_event_received(hdev, event, skb); + default: + return 1; + } +} + +static struct nfc_hci_ops st21nfca_hci_ops = { + .open = st21nfca_hci_open, + .close = st21nfca_hci_close, + .load_session = st21nfca_hci_load_session, + .hci_ready = st21nfca_hci_ready, + .xmit = st21nfca_hci_xmit, + .start_poll = st21nfca_hci_start_poll, + .stop_poll = st21nfca_hci_stop_poll, + .dep_link_up = st21nfca_hci_dep_link_up, + .dep_link_down = st21nfca_hci_dep_link_down, + .target_from_gate = st21nfca_hci_target_from_gate, + .complete_target_discovered = st21nfca_hci_complete_target_discovered, + .im_transceive = st21nfca_hci_im_transceive, + .tm_send = st21nfca_hci_tm_send, + .check_presence = st21nfca_hci_check_presence, + .event_received = st21nfca_hci_event_received, + .cmd_received = st21nfca_hci_cmd_received, + .discover_se = st21nfca_hci_discover_se, + .enable_se = st21nfca_hci_enable_se, + .disable_se = st21nfca_hci_disable_se, + .se_io = st21nfca_hci_se_io, +}; + +int st21nfca_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, + char *llc_name, int phy_headroom, int phy_tailroom, + int phy_payload, struct nfc_hci_dev **hdev, + struct st21nfca_se_status *se_status) +{ + struct st21nfca_hci_info *info; + int r = 0; + int dev_num; + u32 protocols; + struct nfc_hci_init_data init_data; + unsigned long quirks = 0; + + info = kzalloc(sizeof(struct st21nfca_hci_info), GFP_KERNEL); + if (!info) { + r = -ENOMEM; + goto err_alloc_hdev; + } + + info->phy_ops = phy_ops; + info->phy_id = phy_id; + info->state = ST21NFCA_ST_COLD; + mutex_init(&info->info_lock); + + init_data.gate_count = ARRAY_SIZE(st21nfca_gates); + + memcpy(init_data.gates, st21nfca_gates, sizeof(st21nfca_gates)); + + /* + * Session id must include the driver name + i2c bus addr + * persistent info to discriminate 2 identical chips + */ + dev_num = find_first_zero_bit(dev_mask, ST21NFCA_NUM_DEVICES); + if (dev_num >= ST21NFCA_NUM_DEVICES) + return -ENODEV; + + set_bit(dev_num, dev_mask); + + scnprintf(init_data.session_id, sizeof(init_data.session_id), "%s%2x", + "ST21AH", dev_num); + + protocols = NFC_PROTO_JEWEL_MASK | + NFC_PROTO_MIFARE_MASK | + NFC_PROTO_FELICA_MASK | + NFC_PROTO_ISO14443_MASK | + NFC_PROTO_ISO14443_B_MASK | + NFC_PROTO_ISO15693_MASK | + NFC_PROTO_NFC_DEP_MASK; + + set_bit(NFC_HCI_QUIRK_SHORT_CLEAR, &quirks); + + info->hdev = + nfc_hci_allocate_device(&st21nfca_hci_ops, &init_data, quirks, + protocols, llc_name, + phy_headroom + ST21NFCA_CMDS_HEADROOM, + phy_tailroom, phy_payload); + + if (!info->hdev) { + pr_err("Cannot allocate nfc hdev.\n"); + r = -ENOMEM; + goto err_alloc_hdev; + } + + info->se_status = se_status; + + nfc_hci_set_clientdata(info->hdev, info); + + r = nfc_hci_register_device(info->hdev); + if (r) + goto err_regdev; + + *hdev = info->hdev; + st21nfca_dep_init(info->hdev); + st21nfca_se_init(info->hdev); + st21nfca_vendor_cmds_init(info->hdev); + + return 0; + +err_regdev: + nfc_hci_free_device(info->hdev); + +err_alloc_hdev: + kfree(info); + + return r; +} +EXPORT_SYMBOL(st21nfca_hci_probe); + +void st21nfca_hci_remove(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + st21nfca_dep_deinit(hdev); + st21nfca_se_deinit(hdev); + nfc_hci_unregister_device(hdev); + nfc_hci_free_device(hdev); + kfree(info); +} +EXPORT_SYMBOL(st21nfca_hci_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/st21nfca/dep.c b/drivers/nfc/st21nfca/dep.c new file mode 100644 index 0000000..798a32b --- /dev/null +++ b/drivers/nfc/st21nfca/dep.c @@ -0,0 +1,689 @@ +/* + * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <net/nfc/hci.h> + +#include "st21nfca.h" + +#define ST21NFCA_NFCIP1_INITIATOR 0x00 +#define ST21NFCA_NFCIP1_REQ 0xd4 +#define ST21NFCA_NFCIP1_RES 0xd5 +#define ST21NFCA_NFCIP1_ATR_REQ 0x00 +#define ST21NFCA_NFCIP1_ATR_RES 0x01 +#define ST21NFCA_NFCIP1_PSL_REQ 0x04 +#define ST21NFCA_NFCIP1_PSL_RES 0x05 +#define ST21NFCA_NFCIP1_DEP_REQ 0x06 +#define ST21NFCA_NFCIP1_DEP_RES 0x07 + +#define ST21NFCA_NFC_DEP_PFB_PNI(pfb) ((pfb) & 0x03) +#define ST21NFCA_NFC_DEP_PFB_TYPE(pfb) ((pfb) & 0xE0) +#define ST21NFCA_NFC_DEP_PFB_IS_TIMEOUT(pfb) \ + ((pfb) & ST21NFCA_NFC_DEP_PFB_TIMEOUT_BIT) +#define ST21NFCA_NFC_DEP_DID_BIT_SET(pfb) ((pfb) & 0x04) +#define ST21NFCA_NFC_DEP_NAD_BIT_SET(pfb) ((pfb) & 0x08) +#define ST21NFCA_NFC_DEP_PFB_TIMEOUT_BIT 0x10 + +#define ST21NFCA_NFC_DEP_PFB_IS_TIMEOUT(pfb) \ + ((pfb) & ST21NFCA_NFC_DEP_PFB_TIMEOUT_BIT) + +#define ST21NFCA_NFC_DEP_PFB_I_PDU 0x00 +#define ST21NFCA_NFC_DEP_PFB_ACK_NACK_PDU 0x40 +#define ST21NFCA_NFC_DEP_PFB_SUPERVISOR_PDU 0x80 + +#define ST21NFCA_ATR_REQ_MIN_SIZE 17 +#define ST21NFCA_ATR_REQ_MAX_SIZE 65 +#define ST21NFCA_LR_BITS_PAYLOAD_SIZE_254B 0x30 +#define ST21NFCA_GB_BIT 0x02 + +#define ST21NFCA_EVT_SEND_DATA 0x10 +#define ST21NFCA_EVT_FIELD_ON 0x11 +#define ST21NFCA_EVT_CARD_DEACTIVATED 0x12 +#define ST21NFCA_EVT_CARD_ACTIVATED 0x13 +#define ST21NFCA_EVT_FIELD_OFF 0x14 + +#define ST21NFCA_EVT_CARD_F_BITRATE 0x16 +#define ST21NFCA_EVT_READER_F_BITRATE 0x13 +#define ST21NFCA_PSL_REQ_SEND_SPEED(brs) (brs & 0x38) +#define ST21NFCA_PSL_REQ_RECV_SPEED(brs) (brs & 0x07) +#define ST21NFCA_PP2LRI(pp) ((pp & 0x30) >> 4) +#define ST21NFCA_CARD_BITRATE_212 0x01 +#define ST21NFCA_CARD_BITRATE_424 0x02 + +#define ST21NFCA_DEFAULT_TIMEOUT 0x0a + + +#define PROTOCOL_ERR(req) pr_err("%d: ST21NFCA Protocol error: %s\n", \ + __LINE__, req) + +struct st21nfca_atr_req { + u8 length; + u8 cmd0; + u8 cmd1; + u8 nfcid3[NFC_NFCID3_MAXSIZE]; + u8 did; + u8 bsi; + u8 bri; + u8 ppi; + u8 gbi[0]; +} __packed; + +struct st21nfca_atr_res { + u8 length; + u8 cmd0; + u8 cmd1; + u8 nfcid3[NFC_NFCID3_MAXSIZE]; + u8 did; + u8 bsi; + u8 bri; + u8 to; + u8 ppi; + u8 gbi[0]; +} __packed; + +struct st21nfca_psl_req { + u8 length; + u8 cmd0; + u8 cmd1; + u8 did; + u8 brs; + u8 fsl; +} __packed; + +struct st21nfca_psl_res { + u8 length; + u8 cmd0; + u8 cmd1; + u8 did; +} __packed; + +struct st21nfca_dep_req_res { + u8 length; + u8 cmd0; + u8 cmd1; + u8 pfb; + u8 did; + u8 nad; +} __packed; + +static void st21nfca_tx_work(struct work_struct *work) +{ + struct st21nfca_hci_info *info = container_of(work, + struct st21nfca_hci_info, + dep_info.tx_work); + + struct nfc_dev *dev; + struct sk_buff *skb; + + if (info) { + dev = info->hdev->ndev; + skb = info->dep_info.tx_pending; + + device_lock(&dev->dev); + + nfc_hci_send_cmd_async(info->hdev, ST21NFCA_RF_READER_F_GATE, + ST21NFCA_WR_XCHG_DATA, skb->data, skb->len, + info->async_cb, info); + device_unlock(&dev->dev); + kfree_skb(skb); + } +} + +static void st21nfca_im_send_pdu(struct st21nfca_hci_info *info, + struct sk_buff *skb) +{ + info->dep_info.tx_pending = skb; + schedule_work(&info->dep_info.tx_work); +} + +static int st21nfca_tm_send_atr_res(struct nfc_hci_dev *hdev, + struct st21nfca_atr_req *atr_req) +{ + struct st21nfca_atr_res *atr_res; + struct sk_buff *skb; + size_t gb_len; + int r; + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + gb_len = atr_req->length - sizeof(struct st21nfca_atr_req); + skb = alloc_skb(atr_req->length + 1, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + skb_put(skb, sizeof(struct st21nfca_atr_res)); + + atr_res = (struct st21nfca_atr_res *)skb->data; + memset(atr_res, 0, sizeof(struct st21nfca_atr_res)); + + atr_res->length = atr_req->length + 1; + atr_res->cmd0 = ST21NFCA_NFCIP1_RES; + atr_res->cmd1 = ST21NFCA_NFCIP1_ATR_RES; + + memcpy(atr_res->nfcid3, atr_req->nfcid3, 6); + atr_res->bsi = 0x00; + atr_res->bri = 0x00; + atr_res->to = ST21NFCA_DEFAULT_TIMEOUT; + atr_res->ppi = ST21NFCA_LR_BITS_PAYLOAD_SIZE_254B; + + if (gb_len) { + skb_put(skb, gb_len); + + atr_res->ppi |= ST21NFCA_GB_BIT; + memcpy(atr_res->gbi, atr_req->gbi, gb_len); + r = nfc_set_remote_general_bytes(hdev->ndev, atr_res->gbi, + gb_len); + if (r < 0) + return r; + } + + info->dep_info.curr_nfc_dep_pni = 0; + + r = nfc_hci_send_event(hdev, ST21NFCA_RF_CARD_F_GATE, + ST21NFCA_EVT_SEND_DATA, skb->data, skb->len); + kfree_skb(skb); + return r; +} + +static int st21nfca_tm_recv_atr_req(struct nfc_hci_dev *hdev, + struct sk_buff *skb) +{ + struct st21nfca_atr_req *atr_req; + size_t gb_len; + int r; + + skb_trim(skb, skb->len - 1); + + if (!skb->len) { + r = -EIO; + goto exit; + } + + if (skb->len < ST21NFCA_ATR_REQ_MIN_SIZE) { + r = -EPROTO; + goto exit; + } + + atr_req = (struct st21nfca_atr_req *)skb->data; + + if (atr_req->length < sizeof(struct st21nfca_atr_req)) { + r = -EPROTO; + goto exit; + } + + r = st21nfca_tm_send_atr_res(hdev, atr_req); + if (r) + goto exit; + + gb_len = skb->len - sizeof(struct st21nfca_atr_req); + + r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK, + NFC_COMM_PASSIVE, atr_req->gbi, gb_len); + if (r) + goto exit; + + r = 0; + +exit: + return r; +} + +static int st21nfca_tm_send_psl_res(struct nfc_hci_dev *hdev, + struct st21nfca_psl_req *psl_req) +{ + struct st21nfca_psl_res *psl_res; + struct sk_buff *skb; + u8 bitrate[2] = {0, 0}; + int r; + + skb = alloc_skb(sizeof(struct st21nfca_psl_res), GFP_KERNEL); + if (!skb) + return -ENOMEM; + skb_put(skb, sizeof(struct st21nfca_psl_res)); + + psl_res = (struct st21nfca_psl_res *)skb->data; + + psl_res->length = sizeof(struct st21nfca_psl_res); + psl_res->cmd0 = ST21NFCA_NFCIP1_RES; + psl_res->cmd1 = ST21NFCA_NFCIP1_PSL_RES; + psl_res->did = psl_req->did; + + r = nfc_hci_send_event(hdev, ST21NFCA_RF_CARD_F_GATE, + ST21NFCA_EVT_SEND_DATA, skb->data, skb->len); + if (r < 0) + goto error; + + /* + * ST21NFCA only support P2P passive. + * PSL_REQ BRS value != 0 has only a meaning to + * change technology to type F. + * We change to BITRATE 424Kbits. + * In other case switch to BITRATE 106Kbits. + */ + if (ST21NFCA_PSL_REQ_SEND_SPEED(psl_req->brs) && + ST21NFCA_PSL_REQ_RECV_SPEED(psl_req->brs)) { + bitrate[0] = ST21NFCA_CARD_BITRATE_424; + bitrate[1] = ST21NFCA_CARD_BITRATE_424; + } + + /* Send an event to change bitrate change event to card f */ + r = nfc_hci_send_event(hdev, ST21NFCA_RF_CARD_F_GATE, + ST21NFCA_EVT_CARD_F_BITRATE, bitrate, 2); +error: + kfree_skb(skb); + return r; +} + +static int st21nfca_tm_recv_psl_req(struct nfc_hci_dev *hdev, + struct sk_buff *skb) +{ + struct st21nfca_psl_req *psl_req; + int r; + + skb_trim(skb, skb->len - 1); + + if (!skb->len) { + r = -EIO; + goto exit; + } + + psl_req = (struct st21nfca_psl_req *)skb->data; + + if (skb->len < sizeof(struct st21nfca_psl_req)) { + r = -EIO; + goto exit; + } + + r = st21nfca_tm_send_psl_res(hdev, psl_req); +exit: + return r; +} + +int st21nfca_tm_send_dep_res(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + int r; + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + *skb_push(skb, 1) = info->dep_info.curr_nfc_dep_pni; + *skb_push(skb, 1) = ST21NFCA_NFCIP1_DEP_RES; + *skb_push(skb, 1) = ST21NFCA_NFCIP1_RES; + *skb_push(skb, 1) = skb->len; + + r = nfc_hci_send_event(hdev, ST21NFCA_RF_CARD_F_GATE, + ST21NFCA_EVT_SEND_DATA, skb->data, skb->len); + kfree_skb(skb); + + return r; +} +EXPORT_SYMBOL(st21nfca_tm_send_dep_res); + +static int st21nfca_tm_recv_dep_req(struct nfc_hci_dev *hdev, + struct sk_buff *skb) +{ + struct st21nfca_dep_req_res *dep_req; + u8 size; + int r; + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + skb_trim(skb, skb->len - 1); + + size = 4; + + dep_req = (struct st21nfca_dep_req_res *)skb->data; + if (skb->len < size) { + r = -EIO; + goto exit; + } + + if (ST21NFCA_NFC_DEP_DID_BIT_SET(dep_req->pfb)) + size++; + if (ST21NFCA_NFC_DEP_NAD_BIT_SET(dep_req->pfb)) + size++; + + if (skb->len < size) { + r = -EIO; + goto exit; + } + + /* Receiving DEP_REQ - Decoding */ + switch (ST21NFCA_NFC_DEP_PFB_TYPE(dep_req->pfb)) { + case ST21NFCA_NFC_DEP_PFB_I_PDU: + info->dep_info.curr_nfc_dep_pni = + ST21NFCA_NFC_DEP_PFB_PNI(dep_req->pfb); + break; + case ST21NFCA_NFC_DEP_PFB_ACK_NACK_PDU: + pr_err("Received a ACK/NACK PDU\n"); + break; + case ST21NFCA_NFC_DEP_PFB_SUPERVISOR_PDU: + pr_err("Received a SUPERVISOR PDU\n"); + break; + } + + skb_pull(skb, size); + + return nfc_tm_data_received(hdev->ndev, skb); +exit: + return r; +} + +static int st21nfca_tm_event_send_data(struct nfc_hci_dev *hdev, + struct sk_buff *skb) +{ + u8 cmd0, cmd1; + int r; + + cmd0 = skb->data[1]; + switch (cmd0) { + case ST21NFCA_NFCIP1_REQ: + cmd1 = skb->data[2]; + switch (cmd1) { + case ST21NFCA_NFCIP1_ATR_REQ: + r = st21nfca_tm_recv_atr_req(hdev, skb); + break; + case ST21NFCA_NFCIP1_PSL_REQ: + r = st21nfca_tm_recv_psl_req(hdev, skb); + break; + case ST21NFCA_NFCIP1_DEP_REQ: + r = st21nfca_tm_recv_dep_req(hdev, skb); + break; + default: + return 1; + } + default: + return 1; + } + return r; +} + +/* + * Returns: + * <= 0: driver handled the event, skb consumed + * 1: driver does not handle the event, please do standard processing + */ +int st21nfca_dep_event_received(struct nfc_hci_dev *hdev, + u8 event, struct sk_buff *skb) +{ + int r = 0; + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + pr_debug("dep event: %d\n", event); + + switch (event) { + case ST21NFCA_EVT_CARD_ACTIVATED: + info->dep_info.curr_nfc_dep_pni = 0; + break; + case ST21NFCA_EVT_CARD_DEACTIVATED: + break; + case ST21NFCA_EVT_FIELD_ON: + break; + case ST21NFCA_EVT_FIELD_OFF: + break; + case ST21NFCA_EVT_SEND_DATA: + r = st21nfca_tm_event_send_data(hdev, skb); + if (r < 0) + return r; + return 0; + default: + nfc_err(&hdev->ndev->dev, "Unexpected event on card f gate\n"); + return 1; + } + kfree_skb(skb); + return r; +} +EXPORT_SYMBOL(st21nfca_dep_event_received); + +static void st21nfca_im_send_psl_req(struct nfc_hci_dev *hdev, u8 did, u8 bsi, + u8 bri, u8 lri) +{ + struct sk_buff *skb; + struct st21nfca_psl_req *psl_req; + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + skb = + alloc_skb(sizeof(struct st21nfca_psl_req) + 1, GFP_KERNEL); + if (!skb) + return; + skb_reserve(skb, 1); + + skb_put(skb, sizeof(struct st21nfca_psl_req)); + psl_req = (struct st21nfca_psl_req *) skb->data; + + psl_req->length = sizeof(struct st21nfca_psl_req); + psl_req->cmd0 = ST21NFCA_NFCIP1_REQ; + psl_req->cmd1 = ST21NFCA_NFCIP1_PSL_REQ; + psl_req->did = did; + psl_req->brs = (0x30 & bsi << 4) | (bri & 0x03); + psl_req->fsl = lri; + + *skb_push(skb, 1) = info->dep_info.to | 0x10; + + st21nfca_im_send_pdu(info, skb); +} + +#define ST21NFCA_CB_TYPE_READER_F 1 +static void st21nfca_im_recv_atr_res_cb(void *context, struct sk_buff *skb, + int err) +{ + struct st21nfca_hci_info *info = context; + struct st21nfca_atr_res *atr_res; + int r; + + if (err != 0) + return; + + if (!skb) + return; + + switch (info->async_cb_type) { + case ST21NFCA_CB_TYPE_READER_F: + skb_trim(skb, skb->len - 1); + atr_res = (struct st21nfca_atr_res *)skb->data; + r = nfc_set_remote_general_bytes(info->hdev->ndev, + atr_res->gbi, + skb->len - sizeof(struct st21nfca_atr_res)); + if (r < 0) + return; + + if (atr_res->to >= 0x0e) + info->dep_info.to = 0x0e; + else + info->dep_info.to = atr_res->to + 1; + + info->dep_info.to |= 0x10; + + r = nfc_dep_link_is_up(info->hdev->ndev, info->dep_info.idx, + NFC_COMM_PASSIVE, NFC_RF_INITIATOR); + if (r < 0) + return; + + info->dep_info.curr_nfc_dep_pni = 0; + if (ST21NFCA_PP2LRI(atr_res->ppi) != info->dep_info.lri) + st21nfca_im_send_psl_req(info->hdev, atr_res->did, + atr_res->bsi, atr_res->bri, + ST21NFCA_PP2LRI(atr_res->ppi)); + break; + default: + kfree_skb(skb); + break; + } +} + +int st21nfca_im_send_atr_req(struct nfc_hci_dev *hdev, u8 *gb, size_t gb_len) +{ + struct sk_buff *skb; + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + struct st21nfca_atr_req *atr_req; + struct nfc_target *target; + uint size; + + info->dep_info.to = ST21NFCA_DEFAULT_TIMEOUT; + size = ST21NFCA_ATR_REQ_MIN_SIZE + gb_len; + if (size > ST21NFCA_ATR_REQ_MAX_SIZE) { + PROTOCOL_ERR("14.6.1.1"); + return -EINVAL; + } + + skb = + alloc_skb(sizeof(struct st21nfca_atr_req) + gb_len + 1, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + skb_reserve(skb, 1); + + skb_put(skb, sizeof(struct st21nfca_atr_req)); + + atr_req = (struct st21nfca_atr_req *)skb->data; + memset(atr_req, 0, sizeof(struct st21nfca_atr_req)); + + atr_req->cmd0 = ST21NFCA_NFCIP1_REQ; + atr_req->cmd1 = ST21NFCA_NFCIP1_ATR_REQ; + memset(atr_req->nfcid3, 0, NFC_NFCID3_MAXSIZE); + target = hdev->ndev->targets; + + if (target->sensf_res_len > 0) + memcpy(atr_req->nfcid3, target->sensf_res, + target->sensf_res_len); + else + get_random_bytes(atr_req->nfcid3, NFC_NFCID3_MAXSIZE); + + atr_req->did = 0x0; + + atr_req->bsi = 0x00; + atr_req->bri = 0x00; + atr_req->ppi = ST21NFCA_LR_BITS_PAYLOAD_SIZE_254B; + if (gb_len) { + atr_req->ppi |= ST21NFCA_GB_BIT; + memcpy(skb_put(skb, gb_len), gb, gb_len); + } + atr_req->length = sizeof(struct st21nfca_atr_req) + hdev->gb_len; + + *skb_push(skb, 1) = info->dep_info.to | 0x10; /* timeout */ + + info->async_cb_type = ST21NFCA_CB_TYPE_READER_F; + info->async_cb_context = info; + info->async_cb = st21nfca_im_recv_atr_res_cb; + info->dep_info.bri = atr_req->bri; + info->dep_info.bsi = atr_req->bsi; + info->dep_info.lri = ST21NFCA_PP2LRI(atr_req->ppi); + + return nfc_hci_send_cmd_async(hdev, ST21NFCA_RF_READER_F_GATE, + ST21NFCA_WR_XCHG_DATA, skb->data, + skb->len, info->async_cb, info); +} +EXPORT_SYMBOL(st21nfca_im_send_atr_req); + +static void st21nfca_im_recv_dep_res_cb(void *context, struct sk_buff *skb, + int err) +{ + struct st21nfca_hci_info *info = context; + struct st21nfca_dep_req_res *dep_res; + + int size; + + if (err != 0) + return; + + if (!skb) + return; + + switch (info->async_cb_type) { + case ST21NFCA_CB_TYPE_READER_F: + dep_res = (struct st21nfca_dep_req_res *)skb->data; + + size = 3; + if (skb->len < size) + goto exit; + + if (ST21NFCA_NFC_DEP_DID_BIT_SET(dep_res->pfb)) + size++; + if (ST21NFCA_NFC_DEP_NAD_BIT_SET(dep_res->pfb)) + size++; + + if (skb->len < size) + goto exit; + + skb_trim(skb, skb->len - 1); + + /* Receiving DEP_REQ - Decoding */ + switch (ST21NFCA_NFC_DEP_PFB_TYPE(dep_res->pfb)) { + case ST21NFCA_NFC_DEP_PFB_ACK_NACK_PDU: + pr_err("Received a ACK/NACK PDU\n"); + case ST21NFCA_NFC_DEP_PFB_I_PDU: + info->dep_info.curr_nfc_dep_pni = + ST21NFCA_NFC_DEP_PFB_PNI(dep_res->pfb + 1); + size++; + skb_pull(skb, size); + nfc_tm_data_received(info->hdev->ndev, skb); + break; + case ST21NFCA_NFC_DEP_PFB_SUPERVISOR_PDU: + pr_err("Received a SUPERVISOR PDU\n"); + skb_pull(skb, size); + *skb_push(skb, 1) = ST21NFCA_NFCIP1_DEP_REQ; + *skb_push(skb, 1) = ST21NFCA_NFCIP1_REQ; + *skb_push(skb, 1) = skb->len; + *skb_push(skb, 1) = info->dep_info.to | 0x10; + + st21nfca_im_send_pdu(info, skb); + break; + } + + return; + default: + break; + } + +exit: + kfree_skb(skb); +} + +int st21nfca_im_send_dep_req(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + info->async_cb_type = ST21NFCA_CB_TYPE_READER_F; + info->async_cb_context = info; + info->async_cb = st21nfca_im_recv_dep_res_cb; + + *skb_push(skb, 1) = info->dep_info.curr_nfc_dep_pni; + *skb_push(skb, 1) = ST21NFCA_NFCIP1_DEP_REQ; + *skb_push(skb, 1) = ST21NFCA_NFCIP1_REQ; + *skb_push(skb, 1) = skb->len; + + *skb_push(skb, 1) = info->dep_info.to | 0x10; + + return nfc_hci_send_cmd_async(hdev, ST21NFCA_RF_READER_F_GATE, + ST21NFCA_WR_XCHG_DATA, + skb->data, skb->len, + info->async_cb, info); +} +EXPORT_SYMBOL(st21nfca_im_send_dep_req); + +void st21nfca_dep_init(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + INIT_WORK(&info->dep_info.tx_work, st21nfca_tx_work); + info->dep_info.curr_nfc_dep_pni = 0; + info->dep_info.idx = 0; + info->dep_info.to = ST21NFCA_DEFAULT_TIMEOUT; +} +EXPORT_SYMBOL(st21nfca_dep_init); + +void st21nfca_dep_deinit(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + cancel_work_sync(&info->dep_info.tx_work); +} +EXPORT_SYMBOL(st21nfca_dep_deinit); diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c new file mode 100644 index 0000000..5a82f55 --- /dev/null +++ b/drivers/nfc/st21nfca/i2c.c @@ -0,0 +1,735 @@ +/* + * I2C Link Layer for ST21NFCA HCI based Driver + * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/crc-ccitt.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <linux/acpi.h> +#include <linux/miscdevice.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/nfc.h> +#include <linux/firmware.h> +#include <linux/platform_data/st21nfca.h> +#include <asm/unaligned.h> + +#include <net/nfc/hci.h> +#include <net/nfc/llc.h> +#include <net/nfc/nfc.h> + +#include "st21nfca.h" + +/* + * Every frame starts with ST21NFCA_SOF_EOF and ends with ST21NFCA_SOF_EOF. + * Because ST21NFCA_SOF_EOF is a possible data value, there is a mecanism + * called byte stuffing has been introduced. + * + * if byte == ST21NFCA_SOF_EOF or ST21NFCA_ESCAPE_BYTE_STUFFING + * - insert ST21NFCA_ESCAPE_BYTE_STUFFING (escape byte) + * - xor byte with ST21NFCA_BYTE_STUFFING_MASK + */ +#define ST21NFCA_SOF_EOF 0x7e +#define ST21NFCA_BYTE_STUFFING_MASK 0x20 +#define ST21NFCA_ESCAPE_BYTE_STUFFING 0x7d + +/* SOF + 00 */ +#define ST21NFCA_FRAME_HEADROOM 2 + +/* 2 bytes crc + EOF */ +#define ST21NFCA_FRAME_TAILROOM 3 +#define IS_START_OF_FRAME(buf) (buf[0] == ST21NFCA_SOF_EOF && \ + buf[1] == 0) + +#define ST21NFCA_HCI_I2C_DRIVER_NAME "st21nfca_hci_i2c" + +#define ST21NFCA_GPIO_NAME_EN "enable" + +struct st21nfca_i2c_phy { + struct i2c_client *i2c_dev; + struct nfc_hci_dev *hdev; + + unsigned int gpio_ena; + unsigned int irq_polarity; + + struct st21nfca_se_status se_status; + + struct sk_buff *pending_skb; + int current_read_len; + /* + * crc might have fail because i2c macro + * is disable due to other interface activity + */ + int crc_trials; + + int powered; + int run_mode; + + /* + * < 0 if hardware error occured (e.g. i2c err) + * and prevents normal operation. + */ + int hard_fault; + struct mutex phy_lock; +}; + +static u8 len_seq[] = { 16, 24, 12, 29 }; +static u16 wait_tab[] = { 2, 3, 5, 15, 20, 40}; + +#define I2C_DUMP_SKB(info, skb) \ +do { \ + pr_debug("%s:\n", info); \ + print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \ + 16, 1, (skb)->data, (skb)->len, 0); \ +} while (0) + +/* + * In order to get the CLF in a known state we generate an internal reboot + * using a proprietary command. + * Once the reboot is completed, we expect to receive a ST21NFCA_SOF_EOF + * fill buffer. + */ +static int st21nfca_hci_platform_init(struct st21nfca_i2c_phy *phy) +{ + u16 wait_reboot[] = { 50, 300, 1000 }; + char reboot_cmd[] = { 0x7E, 0x66, 0x48, 0xF6, 0x7E }; + u8 tmp[ST21NFCA_HCI_LLC_MAX_SIZE]; + int i, r = -1; + + for (i = 0; i < ARRAY_SIZE(wait_reboot) && r < 0; i++) { + r = i2c_master_send(phy->i2c_dev, reboot_cmd, + sizeof(reboot_cmd)); + if (r < 0) + msleep(wait_reboot[i]); + } + if (r < 0) + return r; + + /* CLF is spending about 20ms to do an internal reboot */ + msleep(20); + r = -1; + for (i = 0; i < ARRAY_SIZE(wait_reboot) && r < 0; i++) { + r = i2c_master_recv(phy->i2c_dev, tmp, + ST21NFCA_HCI_LLC_MAX_SIZE); + if (r < 0) + msleep(wait_reboot[i]); + } + if (r < 0) + return r; + + for (i = 0; i < ST21NFCA_HCI_LLC_MAX_SIZE && + tmp[i] == ST21NFCA_SOF_EOF; i++) + ; + + if (r != ST21NFCA_HCI_LLC_MAX_SIZE) + return -ENODEV; + + usleep_range(1000, 1500); + return 0; +} + +static int st21nfca_hci_i2c_enable(void *phy_id) +{ + struct st21nfca_i2c_phy *phy = phy_id; + + gpio_set_value(phy->gpio_ena, 1); + phy->powered = 1; + phy->run_mode = ST21NFCA_HCI_MODE; + + usleep_range(10000, 15000); + + return 0; +} + +static void st21nfca_hci_i2c_disable(void *phy_id) +{ + struct st21nfca_i2c_phy *phy = phy_id; + + gpio_set_value(phy->gpio_ena, 0); + + phy->powered = 0; +} + +static void st21nfca_hci_add_len_crc(struct sk_buff *skb) +{ + u16 crc; + u8 tmp; + + *skb_push(skb, 1) = 0; + + crc = crc_ccitt(0xffff, skb->data, skb->len); + crc = ~crc; + + tmp = crc & 0x00ff; + *skb_put(skb, 1) = tmp; + + tmp = (crc >> 8) & 0x00ff; + *skb_put(skb, 1) = tmp; +} + +static void st21nfca_hci_remove_len_crc(struct sk_buff *skb) +{ + skb_pull(skb, ST21NFCA_FRAME_HEADROOM); + skb_trim(skb, skb->len - ST21NFCA_FRAME_TAILROOM); +} + +/* + * Writing a frame must not return the number of written bytes. + * It must return either zero for success, or <0 for error. + * In addition, it must not alter the skb + */ +static int st21nfca_hci_i2c_write(void *phy_id, struct sk_buff *skb) +{ + int r = -1, i, j; + struct st21nfca_i2c_phy *phy = phy_id; + struct i2c_client *client = phy->i2c_dev; + u8 tmp[ST21NFCA_HCI_LLC_MAX_SIZE * 2]; + + I2C_DUMP_SKB("st21nfca_hci_i2c_write", skb); + + if (phy->hard_fault != 0) + return phy->hard_fault; + + /* + * Compute CRC before byte stuffing computation on frame + * Note st21nfca_hci_add_len_crc is doing a byte stuffing + * on its own value + */ + st21nfca_hci_add_len_crc(skb); + + /* add ST21NFCA_SOF_EOF on tail */ + *skb_put(skb, 1) = ST21NFCA_SOF_EOF; + /* add ST21NFCA_SOF_EOF on head */ + *skb_push(skb, 1) = ST21NFCA_SOF_EOF; + + /* + * Compute byte stuffing + * if byte == ST21NFCA_SOF_EOF or ST21NFCA_ESCAPE_BYTE_STUFFING + * insert ST21NFCA_ESCAPE_BYTE_STUFFING (escape byte) + * xor byte with ST21NFCA_BYTE_STUFFING_MASK + */ + tmp[0] = skb->data[0]; + for (i = 1, j = 1; i < skb->len - 1; i++, j++) { + if (skb->data[i] == ST21NFCA_SOF_EOF + || skb->data[i] == ST21NFCA_ESCAPE_BYTE_STUFFING) { + tmp[j] = ST21NFCA_ESCAPE_BYTE_STUFFING; + j++; + tmp[j] = skb->data[i] ^ ST21NFCA_BYTE_STUFFING_MASK; + } else { + tmp[j] = skb->data[i]; + } + } + tmp[j] = skb->data[i]; + j++; + + /* + * Manage sleep mode + * Try 3 times to send data with delay between each + */ + mutex_lock(&phy->phy_lock); + for (i = 0; i < ARRAY_SIZE(wait_tab) && r < 0; i++) { + r = i2c_master_send(client, tmp, j); + if (r < 0) + msleep(wait_tab[i]); + } + mutex_unlock(&phy->phy_lock); + + if (r >= 0) { + if (r != j) + r = -EREMOTEIO; + else + r = 0; + } + + st21nfca_hci_remove_len_crc(skb); + + return r; +} + +static int get_frame_size(u8 *buf, int buflen) +{ + int len = 0; + + if (buf[len + 1] == ST21NFCA_SOF_EOF) + return 0; + + for (len = 1; len < buflen && buf[len] != ST21NFCA_SOF_EOF; len++) + ; + + return len; +} + +static int check_crc(u8 *buf, int buflen) +{ + u16 crc; + + crc = crc_ccitt(0xffff, buf, buflen - 2); + crc = ~crc; + + if (buf[buflen - 2] != (crc & 0xff) || buf[buflen - 1] != (crc >> 8)) { + pr_err(ST21NFCA_HCI_DRIVER_NAME + ": CRC error 0x%x != 0x%x 0x%x\n", crc, buf[buflen - 1], + buf[buflen - 2]); + + pr_info(DRIVER_DESC ": %s : BAD CRC\n", __func__); + print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE, + 16, 2, buf, buflen, false); + return -EPERM; + } + return 0; +} + +/* + * Prepare received data for upper layer. + * Received data include byte stuffing, crc and sof/eof + * which is not usable by hci part. + * returns: + * frame size without sof/eof, header and byte stuffing + * -EBADMSG : frame was incorrect and discarded + */ +static int st21nfca_hci_i2c_repack(struct sk_buff *skb) +{ + int i, j, r, size; + + if (skb->len < 1 || (skb->len > 1 && skb->data[1] != 0)) + return -EBADMSG; + + size = get_frame_size(skb->data, skb->len); + if (size > 0) { + skb_trim(skb, size); + /* remove ST21NFCA byte stuffing for upper layer */ + for (i = 1, j = 0; i < skb->len; i++) { + if (skb->data[i + j] == + (u8) ST21NFCA_ESCAPE_BYTE_STUFFING) { + skb->data[i] = skb->data[i + j + 1] + | ST21NFCA_BYTE_STUFFING_MASK; + i++; + j++; + } + skb->data[i] = skb->data[i + j]; + } + /* remove byte stuffing useless byte */ + skb_trim(skb, i - j); + /* remove ST21NFCA_SOF_EOF from head */ + skb_pull(skb, 1); + + r = check_crc(skb->data, skb->len); + if (r != 0) { + i = 0; + return -EBADMSG; + } + + /* remove headbyte */ + skb_pull(skb, 1); + /* remove crc. Byte Stuffing is already removed here */ + skb_trim(skb, skb->len - 2); + return skb->len; + } + return 0; +} + +/* + * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees + * that i2c bus will be flushed and that next read will start on a new frame. + * returned skb contains only LLC header and payload. + * returns: + * frame size : if received frame is complete (find ST21NFCA_SOF_EOF at + * end of read) + * -EAGAIN : if received frame is incomplete (not find ST21NFCA_SOF_EOF + * at end of read) + * -EREMOTEIO : i2c read error (fatal) + * -EBADMSG : frame was incorrect and discarded + * (value returned from st21nfca_hci_i2c_repack) + * -EIO : if no ST21NFCA_SOF_EOF is found after reaching + * the read length end sequence + */ +static int st21nfca_hci_i2c_read(struct st21nfca_i2c_phy *phy, + struct sk_buff *skb) +{ + int r, i; + u8 len; + u8 buf[ST21NFCA_HCI_LLC_MAX_PAYLOAD]; + struct i2c_client *client = phy->i2c_dev; + + if (phy->current_read_len < ARRAY_SIZE(len_seq)) { + len = len_seq[phy->current_read_len]; + + /* + * Add retry mecanism + * Operation on I2C interface may fail in case of operation on + * RF or SWP interface + */ + r = 0; + mutex_lock(&phy->phy_lock); + for (i = 0; i < ARRAY_SIZE(wait_tab) && r <= 0; i++) { + r = i2c_master_recv(client, buf, len); + if (r < 0) + msleep(wait_tab[i]); + } + mutex_unlock(&phy->phy_lock); + + if (r != len) { + phy->current_read_len = 0; + return -EREMOTEIO; + } + + /* + * The first read sequence does not start with SOF. + * Data is corrupeted so we drop it. + */ + if (!phy->current_read_len && !IS_START_OF_FRAME(buf)) { + skb_trim(skb, 0); + phy->current_read_len = 0; + return -EIO; + } else if (phy->current_read_len && IS_START_OF_FRAME(buf)) { + /* + * Previous frame transmission was interrupted and + * the frame got repeated. + * Received frame start with ST21NFCA_SOF_EOF + 00. + */ + skb_trim(skb, 0); + phy->current_read_len = 0; + } + + memcpy(skb_put(skb, len), buf, len); + + if (skb->data[skb->len - 1] == ST21NFCA_SOF_EOF) { + phy->current_read_len = 0; + return st21nfca_hci_i2c_repack(skb); + } + phy->current_read_len++; + return -EAGAIN; + } + return -EIO; +} + +/* + * Reads an shdlc frame from the chip. This is not as straightforward as it + * seems. The frame format is data-crc, and corruption can occur anywhere + * while transiting on i2c bus, such that we could read an invalid data. + * The tricky case is when we read a corrupted data or crc. We must detect + * this here in order to determine that data can be transmitted to the hci + * core. This is the reason why we check the crc here. + * The CLF will repeat a frame until we send a RR on that frame. + * + * On ST21NFCA, IRQ goes in idle when read starts. As no size information are + * available in the incoming data, other IRQ might come. Every IRQ will trigger + * a read sequence with different length and will fill the current frame. + * The reception is complete once we reach a ST21NFCA_SOF_EOF. + */ +static irqreturn_t st21nfca_hci_irq_thread_fn(int irq, void *phy_id) +{ + struct st21nfca_i2c_phy *phy = phy_id; + struct i2c_client *client; + + int r; + + if (!phy || irq != phy->i2c_dev->irq) { + WARN_ON_ONCE(1); + return IRQ_NONE; + } + + client = phy->i2c_dev; + dev_dbg(&client->dev, "IRQ\n"); + + if (phy->hard_fault != 0) + return IRQ_HANDLED; + + r = st21nfca_hci_i2c_read(phy, phy->pending_skb); + if (r == -EREMOTEIO) { + phy->hard_fault = r; + + nfc_hci_recv_frame(phy->hdev, NULL); + + return IRQ_HANDLED; + } else if (r == -EAGAIN || r == -EIO) { + return IRQ_HANDLED; + } else if (r == -EBADMSG && phy->crc_trials < ARRAY_SIZE(wait_tab)) { + /* + * With ST21NFCA, only one interface (I2C, RF or SWP) + * may be active at a time. + * Having incorrect crc is usually due to i2c macrocell + * deactivation in the middle of a transmission. + * It may generate corrupted data on i2c. + * We give sometime to get i2c back. + * The complete frame will be repeated. + */ + msleep(wait_tab[phy->crc_trials]); + phy->crc_trials++; + phy->current_read_len = 0; + kfree_skb(phy->pending_skb); + } else if (r > 0) { + /* + * We succeeded to read data from the CLF and + * data is valid. + * Reset counter. + */ + nfc_hci_recv_frame(phy->hdev, phy->pending_skb); + phy->crc_trials = 0; + } else { + kfree_skb(phy->pending_skb); + } + + phy->pending_skb = alloc_skb(ST21NFCA_HCI_LLC_MAX_SIZE * 2, GFP_KERNEL); + if (phy->pending_skb == NULL) { + phy->hard_fault = -ENOMEM; + nfc_hci_recv_frame(phy->hdev, NULL); + } + + return IRQ_HANDLED; +} + +static struct nfc_phy_ops i2c_phy_ops = { + .write = st21nfca_hci_i2c_write, + .enable = st21nfca_hci_i2c_enable, + .disable = st21nfca_hci_i2c_disable, +}; + +static int st21nfca_hci_i2c_acpi_request_resources(struct i2c_client *client) +{ + struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client); + struct gpio_desc *gpiod_ena; + struct device *dev = &client->dev; + u8 tmp; + + /* Get EN GPIO from ACPI */ + gpiod_ena = devm_gpiod_get_index(dev, ST21NFCA_GPIO_NAME_EN, 1, + GPIOD_OUT_LOW); + if (!IS_ERR(gpiod_ena)) { + nfc_err(dev, "Unable to get ENABLE GPIO\n"); + return -ENODEV; + } + + phy->gpio_ena = desc_to_gpio(gpiod_ena); + + phy->irq_polarity = irq_get_trigger_type(client->irq); + + phy->se_status.is_ese_present = false; + phy->se_status.is_uicc_present = false; + + if (device_property_present(dev, "ese-present")) { + device_property_read_u8(dev, "ese-present", &tmp); + phy->se_status.is_ese_present = tmp; + } + + if (device_property_present(dev, "uicc-present")) { + device_property_read_u8(dev, "uicc-present", &tmp); + phy->se_status.is_uicc_present = tmp; + } + + return 0; +} + +static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client) +{ + struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client); + struct device_node *pp; + int gpio; + int r; + + pp = client->dev.of_node; + if (!pp) + return -ENODEV; + + /* Get GPIO from device tree */ + gpio = of_get_named_gpio(pp, "enable-gpios", 0); + if (gpio < 0) { + nfc_err(&client->dev, "Failed to retrieve enable-gpios from device tree\n"); + return gpio; + } + + /* GPIO request and configuration */ + r = devm_gpio_request_one(&client->dev, gpio, GPIOF_OUT_INIT_HIGH, + ST21NFCA_GPIO_NAME_EN); + if (r) { + nfc_err(&client->dev, "Failed to request enable pin\n"); + return r; + } + + phy->gpio_ena = gpio; + + phy->irq_polarity = irq_get_trigger_type(client->irq); + + phy->se_status.is_ese_present = + of_property_read_bool(pp, "ese-present"); + phy->se_status.is_uicc_present = + of_property_read_bool(pp, "uicc-present"); + + return 0; +} + +static int st21nfca_hci_i2c_request_resources(struct i2c_client *client) +{ + struct st21nfca_nfc_platform_data *pdata; + struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client); + int r; + + pdata = client->dev.platform_data; + if (pdata == NULL) { + nfc_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + + /* store for later use */ + phy->gpio_ena = pdata->gpio_ena; + phy->irq_polarity = pdata->irq_polarity; + + if (phy->gpio_ena > 0) { + r = devm_gpio_request_one(&client->dev, phy->gpio_ena, + GPIOF_OUT_INIT_HIGH, + ST21NFCA_GPIO_NAME_EN); + if (r) { + pr_err("%s : ena gpio_request failed\n", __FILE__); + return r; + } + } + + phy->se_status.is_ese_present = pdata->is_ese_present; + phy->se_status.is_uicc_present = pdata->is_uicc_present; + + return 0; +} + +static int st21nfca_hci_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct st21nfca_i2c_phy *phy; + struct st21nfca_nfc_platform_data *pdata; + int r; + + dev_dbg(&client->dev, "%s\n", __func__); + dev_dbg(&client->dev, "IRQ: %d\n", client->irq); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + nfc_err(&client->dev, "Need I2C_FUNC_I2C\n"); + return -ENODEV; + } + + phy = devm_kzalloc(&client->dev, sizeof(struct st21nfca_i2c_phy), + GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->i2c_dev = client; + phy->pending_skb = alloc_skb(ST21NFCA_HCI_LLC_MAX_SIZE * 2, GFP_KERNEL); + if (phy->pending_skb == NULL) + return -ENOMEM; + + phy->current_read_len = 0; + phy->crc_trials = 0; + mutex_init(&phy->phy_lock); + i2c_set_clientdata(client, phy); + + pdata = client->dev.platform_data; + if (!pdata && client->dev.of_node) { + r = st21nfca_hci_i2c_of_request_resources(client); + if (r) { + nfc_err(&client->dev, "No platform data\n"); + return r; + } + } else if (pdata) { + r = st21nfca_hci_i2c_request_resources(client); + if (r) { + nfc_err(&client->dev, "Cannot get platform resources\n"); + return r; + } + } else if (ACPI_HANDLE(&client->dev)) { + r = st21nfca_hci_i2c_acpi_request_resources(client); + if (r) { + nfc_err(&client->dev, "Cannot get ACPI data\n"); + return r; + } + } else { + nfc_err(&client->dev, "st21nfca platform resources not available\n"); + return -ENODEV; + } + + r = st21nfca_hci_platform_init(phy); + if (r < 0) { + nfc_err(&client->dev, "Unable to reboot st21nfca\n"); + return r; + } + + r = devm_request_threaded_irq(&client->dev, client->irq, NULL, + st21nfca_hci_irq_thread_fn, + phy->irq_polarity | IRQF_ONESHOT, + ST21NFCA_HCI_DRIVER_NAME, phy); + if (r < 0) { + nfc_err(&client->dev, "Unable to register IRQ handler\n"); + return r; + } + + return st21nfca_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME, + ST21NFCA_FRAME_HEADROOM, + ST21NFCA_FRAME_TAILROOM, + ST21NFCA_HCI_LLC_MAX_PAYLOAD, + &phy->hdev, + &phy->se_status); +} + +static int st21nfca_hci_i2c_remove(struct i2c_client *client) +{ + struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "%s\n", __func__); + + st21nfca_hci_remove(phy->hdev); + + if (phy->powered) + st21nfca_hci_i2c_disable(phy); + + return 0; +} + +static struct i2c_device_id st21nfca_hci_i2c_id_table[] = { + {ST21NFCA_HCI_DRIVER_NAME, 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, st21nfca_hci_i2c_id_table); + +static const struct acpi_device_id st21nfca_hci_i2c_acpi_match[] = { + {"SMO2100", 0}, + {} +}; +MODULE_DEVICE_TABLE(acpi, st21nfca_hci_i2c_acpi_match); + +static const struct of_device_id of_st21nfca_i2c_match[] = { + { .compatible = "st,st21nfca-i2c", }, + { .compatible = "st,st21nfca_i2c", }, + {} +}; +MODULE_DEVICE_TABLE(of, of_st21nfca_i2c_match); + +static struct i2c_driver st21nfca_hci_i2c_driver = { + .driver = { + .name = ST21NFCA_HCI_I2C_DRIVER_NAME, + .of_match_table = of_match_ptr(of_st21nfca_i2c_match), + .acpi_match_table = ACPI_PTR(st21nfca_hci_i2c_acpi_match), + }, + .probe = st21nfca_hci_i2c_probe, + .id_table = st21nfca_hci_i2c_id_table, + .remove = st21nfca_hci_i2c_remove, +}; +module_i2c_driver(st21nfca_hci_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/st21nfca/se.c b/drivers/nfc/st21nfca/se.c new file mode 100644 index 0000000..3a98563 --- /dev/null +++ b/drivers/nfc/st21nfca/se.c @@ -0,0 +1,427 @@ +/* + * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <net/nfc/hci.h> + +#include "st21nfca.h" + +#define ST21NFCA_EVT_UICC_ACTIVATE 0x10 +#define ST21NFCA_EVT_UICC_DEACTIVATE 0x13 +#define ST21NFCA_EVT_SE_HARD_RESET 0x20 +#define ST21NFCA_EVT_SE_SOFT_RESET 0x11 +#define ST21NFCA_EVT_SE_END_OF_APDU_TRANSFER 0x21 +#define ST21NFCA_EVT_SE_ACTIVATE 0x22 +#define ST21NFCA_EVT_SE_DEACTIVATE 0x23 + +#define ST21NFCA_EVT_TRANSMIT_DATA 0x10 +#define ST21NFCA_EVT_WTX_REQUEST 0x11 + +#define ST21NFCA_EVT_CONNECTIVITY 0x10 +#define ST21NFCA_EVT_TRANSACTION 0x12 + +#define ST21NFCA_SE_TO_HOT_PLUG 1000 +/* Connectivity pipe only */ +#define ST21NFCA_SE_COUNT_PIPE_UICC 0x01 +/* Connectivity + APDU Reader pipe */ +#define ST21NFCA_SE_COUNT_PIPE_EMBEDDED 0x02 + +#define ST21NFCA_SE_MODE_OFF 0x00 +#define ST21NFCA_SE_MODE_ON 0x01 + +#define ST21NFCA_PARAM_ATR 0x01 +#define ST21NFCA_ATR_DEFAULT_BWI 0x04 + +/* + * WT = 2^BWI/10[s], convert into msecs and add a secure + * room by increasing by 2 this timeout + */ +#define ST21NFCA_BWI_TO_TIMEOUT(x) ((1 << x) * 200) +#define ST21NFCA_ATR_GET_Y_FROM_TD(x) (x >> 4) + +/* If TA is present bit 0 is set */ +#define ST21NFCA_ATR_TA_PRESENT(x) (x & 0x01) +/* If TB is present bit 1 is set */ +#define ST21NFCA_ATR_TB_PRESENT(x) (x & 0x02) + +static u8 st21nfca_se_get_bwi(struct nfc_hci_dev *hdev) +{ + int i; + u8 td; + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + /* Bits 8 to 5 of the first TB for T=1 encode BWI from zero to nine */ + for (i = 1; i < ST21NFCA_ESE_MAX_LENGTH; i++) { + td = ST21NFCA_ATR_GET_Y_FROM_TD(info->se_info.atr[i]); + if (ST21NFCA_ATR_TA_PRESENT(td)) + i++; + if (ST21NFCA_ATR_TB_PRESENT(td)) { + i++; + return info->se_info.atr[i] >> 4; + } + } + return ST21NFCA_ATR_DEFAULT_BWI; +} + +static void st21nfca_se_get_atr(struct nfc_hci_dev *hdev) +{ + int r; + struct sk_buff *skb; + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + r = nfc_hci_get_param(hdev, ST21NFCA_APDU_READER_GATE, + ST21NFCA_PARAM_ATR, &skb); + if (r < 0) + return; + + if (skb->len <= ST21NFCA_ESE_MAX_LENGTH) { + memcpy(info->se_info.atr, skb->data, skb->len); + info->se_info.wt_timeout = + ST21NFCA_BWI_TO_TIMEOUT(st21nfca_se_get_bwi(hdev)); + } + kfree_skb(skb); +} + +static int st21nfca_hci_control_se(struct nfc_hci_dev *hdev, u32 se_idx, + u8 state) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + int r, i; + struct sk_buff *sk_host_list; + u8 se_event, host_id; + + switch (se_idx) { + case NFC_HCI_UICC_HOST_ID: + se_event = (state == ST21NFCA_SE_MODE_ON ? + ST21NFCA_EVT_UICC_ACTIVATE : + ST21NFCA_EVT_UICC_DEACTIVATE); + + info->se_info.count_pipes = 0; + info->se_info.expected_pipes = ST21NFCA_SE_COUNT_PIPE_UICC; + break; + case ST21NFCA_ESE_HOST_ID: + se_event = (state == ST21NFCA_SE_MODE_ON ? + ST21NFCA_EVT_SE_ACTIVATE : + ST21NFCA_EVT_SE_DEACTIVATE); + + info->se_info.count_pipes = 0; + info->se_info.expected_pipes = ST21NFCA_SE_COUNT_PIPE_EMBEDDED; + break; + default: + return -EINVAL; + } + + /* + * Wait for an EVT_HOT_PLUG in order to + * retrieve a relevant host list. + */ + reinit_completion(&info->se_info.req_completion); + r = nfc_hci_send_event(hdev, ST21NFCA_DEVICE_MGNT_GATE, se_event, + NULL, 0); + if (r < 0) + return r; + + mod_timer(&info->se_info.se_active_timer, jiffies + + msecs_to_jiffies(ST21NFCA_SE_TO_HOT_PLUG)); + info->se_info.se_active = true; + + /* Ignore return value and check in any case the host_list */ + wait_for_completion_interruptible(&info->se_info.req_completion); + + r = nfc_hci_get_param(hdev, NFC_HCI_ADMIN_GATE, + NFC_HCI_ADMIN_HOST_LIST, + &sk_host_list); + if (r < 0) + return r; + + for (i = 0; i < sk_host_list->len && + sk_host_list->data[i] != se_idx; i++) + ; + host_id = sk_host_list->data[i]; + kfree_skb(sk_host_list); + + if (state == ST21NFCA_SE_MODE_ON && host_id == se_idx) + return se_idx; + else if (state == ST21NFCA_SE_MODE_OFF && host_id != se_idx) + return se_idx; + + return -1; +} + +int st21nfca_hci_discover_se(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + int se_count = 0; + + if (test_bit(ST21NFCA_FACTORY_MODE, &hdev->quirks)) + return 0; + + if (info->se_status->is_uicc_present) { + nfc_add_se(hdev->ndev, NFC_HCI_UICC_HOST_ID, NFC_SE_UICC); + se_count++; + } + + if (info->se_status->is_ese_present) { + nfc_add_se(hdev->ndev, ST21NFCA_ESE_HOST_ID, NFC_SE_EMBEDDED); + se_count++; + } + + return !se_count; +} +EXPORT_SYMBOL(st21nfca_hci_discover_se); + +int st21nfca_hci_enable_se(struct nfc_hci_dev *hdev, u32 se_idx) +{ + int r; + + /* + * According to upper layer, se_idx == NFC_SE_UICC when + * info->se_status->is_uicc_enable is true should never happen. + * Same for eSE. + */ + r = st21nfca_hci_control_se(hdev, se_idx, ST21NFCA_SE_MODE_ON); + if (r == ST21NFCA_ESE_HOST_ID) { + st21nfca_se_get_atr(hdev); + r = nfc_hci_send_event(hdev, ST21NFCA_APDU_READER_GATE, + ST21NFCA_EVT_SE_SOFT_RESET, NULL, 0); + if (r < 0) + return r; + } else if (r < 0) { + /* + * The activation tentative failed, the secure element + * is not connected. Remove from the list. + */ + nfc_remove_se(hdev->ndev, se_idx); + return r; + } + + return 0; +} +EXPORT_SYMBOL(st21nfca_hci_enable_se); + +int st21nfca_hci_disable_se(struct nfc_hci_dev *hdev, u32 se_idx) +{ + int r; + + /* + * According to upper layer, se_idx == NFC_SE_UICC when + * info->se_status->is_uicc_enable is true should never happen + * Same for eSE. + */ + r = st21nfca_hci_control_se(hdev, se_idx, ST21NFCA_SE_MODE_OFF); + if (r < 0) + return r; + + return 0; +} +EXPORT_SYMBOL(st21nfca_hci_disable_se); + +int st21nfca_hci_se_io(struct nfc_hci_dev *hdev, u32 se_idx, + u8 *apdu, size_t apdu_length, + se_io_cb_t cb, void *cb_context) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + pr_debug("se_io %x\n", se_idx); + + switch (se_idx) { + case ST21NFCA_ESE_HOST_ID: + info->se_info.cb = cb; + info->se_info.cb_context = cb_context; + mod_timer(&info->se_info.bwi_timer, jiffies + + msecs_to_jiffies(info->se_info.wt_timeout)); + info->se_info.bwi_active = true; + return nfc_hci_send_event(hdev, ST21NFCA_APDU_READER_GATE, + ST21NFCA_EVT_TRANSMIT_DATA, + apdu, apdu_length); + default: + return -ENODEV; + } +} +EXPORT_SYMBOL(st21nfca_hci_se_io); + +static void st21nfca_se_wt_timeout(unsigned long data) +{ + /* + * No answer from the secure element + * within the defined timeout. + * Let's send a reset request as recovery procedure. + * According to the situation, we first try to send a software reset + * to the secure element. If the next command is still not + * answering in time, we send to the CLF a secure element hardware + * reset request. + */ + /* hardware reset managed through VCC_UICC_OUT power supply */ + u8 param = 0x01; + struct st21nfca_hci_info *info = (struct st21nfca_hci_info *) data; + + pr_debug("\n"); + + info->se_info.bwi_active = false; + + if (!info->se_info.xch_error) { + info->se_info.xch_error = true; + nfc_hci_send_event(info->hdev, ST21NFCA_APDU_READER_GATE, + ST21NFCA_EVT_SE_SOFT_RESET, NULL, 0); + } else { + info->se_info.xch_error = false; + nfc_hci_send_event(info->hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_EVT_SE_HARD_RESET, ¶m, 1); + } + info->se_info.cb(info->se_info.cb_context, NULL, 0, -ETIME); +} + +static void st21nfca_se_activation_timeout(unsigned long data) +{ + struct st21nfca_hci_info *info = (struct st21nfca_hci_info *) data; + + pr_debug("\n"); + + info->se_info.se_active = false; + + complete(&info->se_info.req_completion); +} + +/* + * Returns: + * <= 0: driver handled the event, skb consumed + * 1: driver does not handle the event, please do standard processing + */ +int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host, + u8 event, struct sk_buff *skb) +{ + int r = 0; + struct device *dev = &hdev->ndev->dev; + struct nfc_evt_transaction *transaction; + + pr_debug("connectivity gate event: %x\n", event); + + switch (event) { + case ST21NFCA_EVT_CONNECTIVITY: + r = nfc_se_connectivity(hdev->ndev, host); + break; + case ST21NFCA_EVT_TRANSACTION: + /* + * According to specification etsi 102 622 + * 11.2.2.4 EVT_TRANSACTION Table 52 + * Description Tag Length + * AID 81 5 to 16 + * PARAMETERS 82 0 to 255 + */ + if (skb->len < NFC_MIN_AID_LENGTH + 2 && + skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG) + return -EPROTO; + + transaction = (struct nfc_evt_transaction *)devm_kzalloc(dev, + skb->len - 2, GFP_KERNEL); + + transaction->aid_len = skb->data[1]; + memcpy(transaction->aid, &skb->data[2], + transaction->aid_len); + + /* Check next byte is PARAMETERS tag (82) */ + if (skb->data[transaction->aid_len + 2] != + NFC_EVT_TRANSACTION_PARAMS_TAG) + return -EPROTO; + + transaction->params_len = skb->data[transaction->aid_len + 3]; + memcpy(transaction->params, skb->data + + transaction->aid_len + 4, transaction->params_len); + + r = nfc_se_transaction(hdev->ndev, host, transaction); + break; + default: + nfc_err(&hdev->ndev->dev, "Unexpected event on connectivity gate\n"); + return 1; + } + kfree_skb(skb); + return r; +} +EXPORT_SYMBOL(st21nfca_connectivity_event_received); + +int st21nfca_apdu_reader_event_received(struct nfc_hci_dev *hdev, + u8 event, struct sk_buff *skb) +{ + int r = 0; + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + pr_debug("apdu reader gate event: %x\n", event); + + switch (event) { + case ST21NFCA_EVT_TRANSMIT_DATA: + del_timer_sync(&info->se_info.bwi_timer); + info->se_info.bwi_active = false; + r = nfc_hci_send_event(hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_EVT_SE_END_OF_APDU_TRANSFER, NULL, 0); + if (r < 0) + goto exit; + + info->se_info.cb(info->se_info.cb_context, + skb->data, skb->len, 0); + break; + case ST21NFCA_EVT_WTX_REQUEST: + mod_timer(&info->se_info.bwi_timer, jiffies + + msecs_to_jiffies(info->se_info.wt_timeout)); + break; + default: + nfc_err(&hdev->ndev->dev, "Unexpected event on apdu reader gate\n"); + return 1; + } + +exit: + kfree_skb(skb); + return r; +} +EXPORT_SYMBOL(st21nfca_apdu_reader_event_received); + +void st21nfca_se_init(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + init_completion(&info->se_info.req_completion); + /* initialize timers */ + init_timer(&info->se_info.bwi_timer); + info->se_info.bwi_timer.data = (unsigned long)info; + info->se_info.bwi_timer.function = st21nfca_se_wt_timeout; + info->se_info.bwi_active = false; + + init_timer(&info->se_info.se_active_timer); + info->se_info.se_active_timer.data = (unsigned long)info; + info->se_info.se_active_timer.function = st21nfca_se_activation_timeout; + info->se_info.se_active = false; + + info->se_info.count_pipes = 0; + info->se_info.expected_pipes = 0; + + info->se_info.xch_error = false; + + info->se_info.wt_timeout = + ST21NFCA_BWI_TO_TIMEOUT(ST21NFCA_ATR_DEFAULT_BWI); +} +EXPORT_SYMBOL(st21nfca_se_init); + +void st21nfca_se_deinit(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + if (info->se_info.bwi_active) + del_timer_sync(&info->se_info.bwi_timer); + if (info->se_info.se_active) + del_timer_sync(&info->se_info.se_active_timer); + + info->se_info.bwi_active = false; + info->se_info.se_active = false; +} +EXPORT_SYMBOL(st21nfca_se_deinit); diff --git a/drivers/nfc/st21nfca/st21nfca.h b/drivers/nfc/st21nfca/st21nfca.h new file mode 100644 index 0000000..94ffb05 --- /dev/null +++ b/drivers/nfc/st21nfca/st21nfca.h @@ -0,0 +1,211 @@ +/* + * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LOCAL_ST21NFCA_H_ +#define __LOCAL_ST21NFCA_H_ + +#include <net/nfc/hci.h> +#include <linux/skbuff.h> +#include <linux/workqueue.h> + +#define HCI_MODE 0 + +/* framing in HCI mode */ +#define ST21NFCA_SOF_EOF_LEN 2 + +/* Almost every time value is 0 */ +#define ST21NFCA_HCI_LLC_LEN 1 + +/* Size in worst case : + * In normal case CRC len = 2 but byte stuffing + * may appear in case one CRC byte = ST21NFCA_SOF_EOF + */ +#define ST21NFCA_HCI_LLC_CRC 4 + +#define ST21NFCA_HCI_LLC_LEN_CRC (ST21NFCA_SOF_EOF_LEN + \ + ST21NFCA_HCI_LLC_LEN + \ + ST21NFCA_HCI_LLC_CRC) +#define ST21NFCA_HCI_LLC_MIN_SIZE (1 + ST21NFCA_HCI_LLC_LEN_CRC) + +/* Worst case when adding byte stuffing between each byte */ +#define ST21NFCA_HCI_LLC_MAX_PAYLOAD 29 +#define ST21NFCA_HCI_LLC_MAX_SIZE (ST21NFCA_HCI_LLC_LEN_CRC + 1 + \ + ST21NFCA_HCI_LLC_MAX_PAYLOAD) + +/* Reader RF commands */ +#define ST21NFCA_WR_XCHG_DATA 0x10 + +#define ST21NFCA_DEVICE_MGNT_GATE 0x01 +#define ST21NFCA_RF_READER_F_GATE 0x14 +#define ST21NFCA_RF_CARD_F_GATE 0x24 +#define ST21NFCA_APDU_READER_GATE 0xf0 +#define ST21NFCA_CONNECTIVITY_GATE 0x41 + +/* + * ref ISO7816-3 chap 8.1. the initial character TS is followed by a + * sequence of at most 32 characters. + */ +#define ST21NFCA_ESE_MAX_LENGTH 33 +#define ST21NFCA_ESE_HOST_ID 0xc0 + +#define DRIVER_DESC "HCI NFC driver for ST21NFCA" + +#define ST21NFCA_HCI_MODE 0 +#define ST21NFCA_NUM_DEVICES 256 + +#define ST21NFCA_VENDOR_OUI 0x0080E1 /* STMicroelectronics */ +#define ST21NFCA_FACTORY_MODE 2 + +struct st21nfca_se_status { + bool is_ese_present; + bool is_uicc_present; +}; + +enum st21nfca_state { + ST21NFCA_ST_COLD, + ST21NFCA_ST_READY, +}; + +/** + * enum nfc_vendor_cmds - supported nfc vendor commands + * + * @FACTORY_MODE: Allow to set the driver into a mode where no secure element + * are activated. It does not consider any NFC_ATTR_VENDOR_DATA. + * @HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. + * It does not consider any NFC_ATTR_VENDOR_DATA. + * @HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example + * RF trimmings or low level drivers configurations (I2C, SPI, SWP). + * @HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing + * table following RF technology, CLF mode or protocol. + * @HCI_DM_GET_INFO: Allow to retrieve CLF information. + * @HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low + * level drivers configurations or RF trimmings. + * @HCI_DM_LOAD: Allow to load a firmware into the CLF. A complete + * packet can be more than 8KB. + * @HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF + * configuration changes without CLF power off. + * @HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the + * white list). + * @HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF + * technology. When using this command to anti-collision is done. + * @HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF + * connectivity. + */ +enum nfc_vendor_cmds { + FACTORY_MODE, + HCI_CLEAR_ALL_PIPES, + HCI_DM_PUT_DATA, + HCI_DM_UPDATE_AID, + HCI_DM_GET_INFO, + HCI_DM_GET_DATA, + HCI_DM_LOAD, + HCI_DM_RESET, + HCI_GET_PARAM, + HCI_DM_FIELD_GENERATOR, + HCI_LOOPBACK, +}; + +struct st21nfca_vendor_info { + struct completion req_completion; + struct sk_buff *rx_skb; +}; + +struct st21nfca_dep_info { + struct sk_buff *tx_pending; + struct work_struct tx_work; + u8 curr_nfc_dep_pni; + u32 idx; + u8 to; + u8 did; + u8 bsi; + u8 bri; + u8 lri; +} __packed; + +struct st21nfca_se_info { + u8 atr[ST21NFCA_ESE_MAX_LENGTH]; + struct completion req_completion; + + struct timer_list bwi_timer; + int wt_timeout; /* in msecs */ + bool bwi_active; + + struct timer_list se_active_timer; + bool se_active; + int expected_pipes; + int count_pipes; + + bool xch_error; + + se_io_cb_t cb; + void *cb_context; +}; + +struct st21nfca_hci_info { + struct nfc_phy_ops *phy_ops; + void *phy_id; + + struct nfc_hci_dev *hdev; + struct st21nfca_se_status *se_status; + + enum st21nfca_state state; + + struct mutex info_lock; + + int async_cb_type; + data_exchange_cb_t async_cb; + void *async_cb_context; + + struct st21nfca_dep_info dep_info; + struct st21nfca_se_info se_info; + struct st21nfca_vendor_info vendor_info; +}; + +int st21nfca_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, + char *llc_name, int phy_headroom, int phy_tailroom, + int phy_payload, struct nfc_hci_dev **hdev, + struct st21nfca_se_status *se_status); +void st21nfca_hci_remove(struct nfc_hci_dev *hdev); + +int st21nfca_dep_event_received(struct nfc_hci_dev *hdev, + u8 event, struct sk_buff *skb); +int st21nfca_tm_send_dep_res(struct nfc_hci_dev *hdev, struct sk_buff *skb); + +int st21nfca_im_send_atr_req(struct nfc_hci_dev *hdev, u8 *gb, size_t gb_len); +int st21nfca_im_send_dep_req(struct nfc_hci_dev *hdev, struct sk_buff *skb); +void st21nfca_dep_init(struct nfc_hci_dev *hdev); +void st21nfca_dep_deinit(struct nfc_hci_dev *hdev); + +int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host, + u8 event, struct sk_buff *skb); +int st21nfca_apdu_reader_event_received(struct nfc_hci_dev *hdev, + u8 event, struct sk_buff *skb); + +int st21nfca_hci_discover_se(struct nfc_hci_dev *hdev); +int st21nfca_hci_enable_se(struct nfc_hci_dev *hdev, u32 se_idx); +int st21nfca_hci_disable_se(struct nfc_hci_dev *hdev, u32 se_idx); +int st21nfca_hci_se_io(struct nfc_hci_dev *hdev, u32 se_idx, + u8 *apdu, size_t apdu_length, + se_io_cb_t cb, void *cb_context); + +void st21nfca_se_init(struct nfc_hci_dev *hdev); +void st21nfca_se_deinit(struct nfc_hci_dev *hdev); + +int st21nfca_hci_loopback_event_received(struct nfc_hci_dev *ndev, u8 event, + struct sk_buff *skb); +int st21nfca_vendor_cmds_init(struct nfc_hci_dev *ndev); + +#endif /* __LOCAL_ST21NFCA_H_ */ diff --git a/drivers/nfc/st21nfca/vendor_cmds.c b/drivers/nfc/st21nfca/vendor_cmds.c new file mode 100644 index 0000000..ab765e5 --- /dev/null +++ b/drivers/nfc/st21nfca/vendor_cmds.c @@ -0,0 +1,375 @@ +/* + * Proprietary commands extension for STMicroelectronics NFC Chip + * + * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <net/genetlink.h> +#include <linux/module.h> +#include <linux/nfc.h> +#include <net/nfc/hci.h> +#include <net/nfc/llc.h> + +#include "st21nfca.h" + +#define ST21NFCA_HCI_DM_GETDATA 0x10 +#define ST21NFCA_HCI_DM_PUTDATA 0x11 +#define ST21NFCA_HCI_DM_LOAD 0x12 +#define ST21NFCA_HCI_DM_GETINFO 0x13 +#define ST21NFCA_HCI_DM_UPDATE_AID 0x20 +#define ST21NFCA_HCI_DM_RESET 0x3e + +#define ST21NFCA_HCI_DM_FIELD_GENERATOR 0x32 + +#define ST21NFCA_FACTORY_MODE_ON 1 +#define ST21NFCA_FACTORY_MODE_OFF 0 + +#define ST21NFCA_EVT_POST_DATA 0x02 + +struct get_param_data { + u8 gate; + u8 data; +} __packed; + +static int st21nfca_factory_mode(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nfc_hci_dev *hdev = nfc_get_drvdata(dev); + + if (data_len != 1) + return -EINVAL; + + pr_debug("factory mode: %x\n", ((u8 *)data)[0]); + + switch (((u8 *)data)[0]) { + case ST21NFCA_FACTORY_MODE_ON: + test_and_set_bit(ST21NFCA_FACTORY_MODE, &hdev->quirks); + break; + case ST21NFCA_FACTORY_MODE_OFF: + clear_bit(ST21NFCA_FACTORY_MODE, &hdev->quirks); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int st21nfca_hci_clear_all_pipes(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nfc_hci_dev *hdev = nfc_get_drvdata(dev); + + return nfc_hci_disconnect_all_gates(hdev); +} + +static int st21nfca_hci_dm_put_data(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nfc_hci_dev *hdev = nfc_get_drvdata(dev); + + return nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_HCI_DM_PUTDATA, data, + data_len, NULL); +} + +static int st21nfca_hci_dm_update_aid(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nfc_hci_dev *hdev = nfc_get_drvdata(dev); + + return nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_HCI_DM_UPDATE_AID, data, data_len, NULL); +} + +static int st21nfca_hci_dm_get_info(struct nfc_dev *dev, void *data, + size_t data_len) +{ + int r; + struct sk_buff *msg, *skb; + struct nfc_hci_dev *hdev = nfc_get_drvdata(dev); + + r = nfc_hci_send_cmd(hdev, + ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_HCI_DM_GETINFO, + data, data_len, &skb); + if (r) + goto exit; + + msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST21NFCA_VENDOR_OUI, + HCI_DM_GET_INFO, skb->len); + if (!msg) { + r = -ENOMEM; + goto free_skb; + } + + if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) { + kfree_skb(msg); + r = -ENOBUFS; + goto free_skb; + } + + r = nfc_vendor_cmd_reply(msg); + +free_skb: + kfree_skb(skb); +exit: + return r; +} + +static int st21nfca_hci_dm_get_data(struct nfc_dev *dev, void *data, + size_t data_len) +{ + int r; + struct sk_buff *msg, *skb; + struct nfc_hci_dev *hdev = nfc_get_drvdata(dev); + + r = nfc_hci_send_cmd(hdev, + ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_HCI_DM_GETDATA, + data, data_len, &skb); + if (r) + goto exit; + + msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST21NFCA_VENDOR_OUI, + HCI_DM_GET_DATA, skb->len); + if (!msg) { + r = -ENOMEM; + goto free_skb; + } + + if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) { + kfree_skb(msg); + r = -ENOBUFS; + goto free_skb; + } + + r = nfc_vendor_cmd_reply(msg); + +free_skb: + kfree_skb(skb); +exit: + return r; +} + +static int st21nfca_hci_dm_load(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nfc_hci_dev *hdev = nfc_get_drvdata(dev); + + return nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_HCI_DM_LOAD, data, data_len, NULL); +} + +static int st21nfca_hci_dm_reset(struct nfc_dev *dev, void *data, + size_t data_len) +{ + int r; + struct nfc_hci_dev *hdev = nfc_get_drvdata(dev); + + r = nfc_hci_send_cmd_async(hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_HCI_DM_RESET, data, data_len, NULL, NULL); + if (r < 0) + return r; + + r = nfc_llc_stop(hdev->llc); + if (r < 0) + return r; + + return nfc_llc_start(hdev->llc); +} + +static int st21nfca_hci_get_param(struct nfc_dev *dev, void *data, + size_t data_len) +{ + int r; + struct sk_buff *msg, *skb; + struct nfc_hci_dev *hdev = nfc_get_drvdata(dev); + struct get_param_data *param = (struct get_param_data *)data; + + if (data_len < sizeof(struct get_param_data)) + return -EPROTO; + + r = nfc_hci_get_param(hdev, param->gate, param->data, &skb); + if (r) + goto exit; + + msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST21NFCA_VENDOR_OUI, + HCI_GET_PARAM, skb->len); + if (!msg) { + r = -ENOMEM; + goto free_skb; + } + + if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) { + kfree_skb(msg); + r = -ENOBUFS; + goto free_skb; + } + + r = nfc_vendor_cmd_reply(msg); + +free_skb: + kfree_skb(skb); +exit: + return r; +} + +static int st21nfca_hci_dm_field_generator(struct nfc_dev *dev, void *data, + size_t data_len) +{ + struct nfc_hci_dev *hdev = nfc_get_drvdata(dev); + + return nfc_hci_send_cmd(hdev, + ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_HCI_DM_FIELD_GENERATOR, + data, data_len, NULL); +} + +int st21nfca_hci_loopback_event_received(struct nfc_hci_dev *hdev, u8 event, + struct sk_buff *skb) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + switch (event) { + case ST21NFCA_EVT_POST_DATA: + info->vendor_info.rx_skb = skb; + break; + default: + nfc_err(&hdev->ndev->dev, "Unexpected event on loopback gate\n"); + } + complete(&info->vendor_info.req_completion); + return 0; +} +EXPORT_SYMBOL(st21nfca_hci_loopback_event_received); + +static int st21nfca_hci_loopback(struct nfc_dev *dev, void *data, + size_t data_len) +{ + int r; + struct sk_buff *msg; + struct nfc_hci_dev *hdev = nfc_get_drvdata(dev); + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + if (data_len <= 0) + return -EPROTO; + + reinit_completion(&info->vendor_info.req_completion); + info->vendor_info.rx_skb = NULL; + + r = nfc_hci_send_event(hdev, NFC_HCI_LOOPBACK_GATE, + ST21NFCA_EVT_POST_DATA, data, data_len); + if (r < 0) { + r = -EPROTO; + goto exit; + } + + wait_for_completion_interruptible(&info->vendor_info.req_completion); + if (!info->vendor_info.rx_skb || + info->vendor_info.rx_skb->len != data_len) { + r = -EPROTO; + goto exit; + } + + msg = nfc_vendor_cmd_alloc_reply_skb(hdev->ndev, + ST21NFCA_VENDOR_OUI, + HCI_LOOPBACK, + info->vendor_info.rx_skb->len); + if (!msg) { + r = -ENOMEM; + goto free_skb; + } + + if (nla_put(msg, NFC_ATTR_VENDOR_DATA, info->vendor_info.rx_skb->len, + info->vendor_info.rx_skb->data)) { + kfree_skb(msg); + r = -ENOBUFS; + goto free_skb; + } + + r = nfc_vendor_cmd_reply(msg); +free_skb: + kfree_skb(info->vendor_info.rx_skb); +exit: + return r; +} + +static struct nfc_vendor_cmd st21nfca_vendor_cmds[] = { + { + .vendor_id = ST21NFCA_VENDOR_OUI, + .subcmd = FACTORY_MODE, + .doit = st21nfca_factory_mode, + }, + { + .vendor_id = ST21NFCA_VENDOR_OUI, + .subcmd = HCI_CLEAR_ALL_PIPES, + .doit = st21nfca_hci_clear_all_pipes, + }, + { + .vendor_id = ST21NFCA_VENDOR_OUI, + .subcmd = HCI_DM_PUT_DATA, + .doit = st21nfca_hci_dm_put_data, + }, + { + .vendor_id = ST21NFCA_VENDOR_OUI, + .subcmd = HCI_DM_UPDATE_AID, + .doit = st21nfca_hci_dm_update_aid, + }, + { + .vendor_id = ST21NFCA_VENDOR_OUI, + .subcmd = HCI_DM_GET_INFO, + .doit = st21nfca_hci_dm_get_info, + }, + { + .vendor_id = ST21NFCA_VENDOR_OUI, + .subcmd = HCI_DM_GET_DATA, + .doit = st21nfca_hci_dm_get_data, + }, + { + .vendor_id = ST21NFCA_VENDOR_OUI, + .subcmd = HCI_DM_LOAD, + .doit = st21nfca_hci_dm_load, + }, + { + .vendor_id = ST21NFCA_VENDOR_OUI, + .subcmd = HCI_DM_RESET, + .doit = st21nfca_hci_dm_reset, + }, + { + .vendor_id = ST21NFCA_VENDOR_OUI, + .subcmd = HCI_GET_PARAM, + .doit = st21nfca_hci_get_param, + }, + { + .vendor_id = ST21NFCA_VENDOR_OUI, + .subcmd = HCI_DM_FIELD_GENERATOR, + .doit = st21nfca_hci_dm_field_generator, + }, + { + .vendor_id = ST21NFCA_VENDOR_OUI, + .subcmd = HCI_LOOPBACK, + .doit = st21nfca_hci_loopback, + }, +}; + +int st21nfca_vendor_cmds_init(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + init_completion(&info->vendor_info.req_completion); + return nfc_set_vendor_cmds(hdev->ndev, st21nfca_vendor_cmds, + sizeof(st21nfca_vendor_cmds)); +} +EXPORT_SYMBOL(st21nfca_vendor_cmds_init); diff --git a/drivers/nfc/st95hf/Kconfig b/drivers/nfc/st95hf/Kconfig new file mode 100644 index 0000000..6bcede0 --- /dev/null +++ b/drivers/nfc/st95hf/Kconfig @@ -0,0 +1,12 @@ +config NFC_ST95HF + depends on !KERNEL_3_18 + tristate "ST95HF NFC Transceiver driver" + depends on m + depends on SPI && NFC_DIGITAL + help + This enables the ST NFC driver for ST95HF NFC transceiver. + This makes use of SPI framework to communicate with transceiver + and registered with NFC digital core to support Linux NFC framework. + + Say Y here to compile support for ST NFC transceiver ST95HF + linux driver into the kernel or say M to compile it as module. diff --git a/drivers/nfc/st95hf/Makefile b/drivers/nfc/st95hf/Makefile new file mode 100644 index 0000000..6ac2da9 --- /dev/null +++ b/drivers/nfc/st95hf/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for STMicroelectronics NFC transceiver ST95HF +# + +obj-$(CPTCFG_NFC_ST95HF) += st95hf.o +st95hf-objs := spi.o core.o diff --git a/drivers/nfc/st95hf/core.c b/drivers/nfc/st95hf/core.c new file mode 100644 index 0000000..c2840e4 --- /dev/null +++ b/drivers/nfc/st95hf/core.c @@ -0,0 +1,1273 @@ +/* + * -------------------------------------------------------------------- + * Driver for ST NFC Transceiver ST95HF + * -------------------------------------------------------------------- + * Copyright (C) 2015 STMicroelectronics Pvt. Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/nfc.h> +#include <linux/of_gpio.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/property.h> +#include <linux/regulator/consumer.h> +#include <linux/wait.h> +#include <net/nfc/digital.h> +#include <net/nfc/nfc.h> + +#include "spi.h" + +/* supported protocols */ +#define ST95HF_SUPPORTED_PROT (NFC_PROTO_ISO14443_MASK | \ + NFC_PROTO_ISO14443_B_MASK | \ + NFC_PROTO_ISO15693_MASK) +/* driver capabilities */ +#define ST95HF_CAPABILITIES NFC_DIGITAL_DRV_CAPS_IN_CRC + +/* Command Send Interface */ +/* ST95HF_COMMAND_SEND CMD Ids */ +#define ECHO_CMD 0x55 +#define WRITE_REGISTER_CMD 0x9 +#define PROTOCOL_SELECT_CMD 0x2 +#define SEND_RECEIVE_CMD 0x4 + +/* Select protocol codes */ +#define ISO15693_PROTOCOL_CODE 0x1 +#define ISO14443A_PROTOCOL_CODE 0x2 +#define ISO14443B_PROTOCOL_CODE 0x3 + +/* + * head room len is 3 + * 1 byte for control byte + * 1 byte for cmd + * 1 byte for size + */ +#define ST95HF_HEADROOM_LEN 3 + +/* + * tailroom is 1 for ISO14443A + * and 0 for ISO14443B/ISO15693, + * hence the max value 1 should be + * taken. + */ +#define ST95HF_TAILROOM_LEN 1 + +/* Command Response interface */ +#define MAX_RESPONSE_BUFFER_SIZE 280 +#define ECHORESPONSE 0x55 +#define ST95HF_ERR_MASK 0xF +#define ST95HF_TIMEOUT_ERROR 0x87 +#define ST95HF_NFCA_CRC_ERR_MASK 0x20 +#define ST95HF_NFCB_CRC_ERR_MASK 0x01 + +/* ST95HF transmission flag values */ +#define TRFLAG_NFCA_SHORT_FRAME 0x07 +#define TRFLAG_NFCA_STD_FRAME 0x08 +#define TRFLAG_NFCA_STD_FRAME_CRC 0x28 + +/* Misc defs */ +#define HIGH 1 +#define LOW 0 +#define ISO14443A_RATS_REQ 0xE0 +#define RATS_TB1_PRESENT_MASK 0x20 +#define RATS_TA1_PRESENT_MASK 0x10 +#define TB1_FWI_MASK 0xF0 +#define WTX_REQ_FROM_TAG 0xF2 + +#define MAX_CMD_LEN 0x7 + +#define MAX_CMD_PARAMS 4 +struct cmd { + int cmd_len; + unsigned char cmd_id; + unsigned char no_cmd_params; + unsigned char cmd_params[MAX_CMD_PARAMS]; + enum req_type req; +}; + +struct param_list { + int param_offset; + int new_param_val; +}; + +/* + * List of top-level cmds to be used internally by the driver. + * All these commands are build on top of ST95HF basic commands + * such as SEND_RECEIVE_CMD, PROTOCOL_SELECT_CMD, etc. + * These top level cmds are used internally while implementing various ops of + * digital layer/driver probe or extending the digital framework layer for + * features that are not yet implemented there, for example, WTX cmd handling. + */ +enum st95hf_cmd_list { + CMD_ECHO, + CMD_ISO14443A_CONFIG, + CMD_ISO14443A_DEMOGAIN, + CMD_ISO14443B_DEMOGAIN, + CMD_ISO14443A_PROTOCOL_SELECT, + CMD_ISO14443B_PROTOCOL_SELECT, + CMD_WTX_RESPONSE, + CMD_FIELD_OFF, + CMD_ISO15693_PROTOCOL_SELECT, +}; + +static const struct cmd cmd_array[] = { + [CMD_ECHO] = { + .cmd_len = 0x2, + .cmd_id = ECHO_CMD, + .no_cmd_params = 0, + .req = SYNC, + }, + [CMD_ISO14443A_CONFIG] = { + .cmd_len = 0x7, + .cmd_id = WRITE_REGISTER_CMD, + .no_cmd_params = 0x4, + .cmd_params = {0x3A, 0x00, 0x5A, 0x04}, + .req = SYNC, + }, + [CMD_ISO14443A_DEMOGAIN] = { + .cmd_len = 0x7, + .cmd_id = WRITE_REGISTER_CMD, + .no_cmd_params = 0x4, + .cmd_params = {0x68, 0x01, 0x01, 0xDF}, + .req = SYNC, + }, + [CMD_ISO14443B_DEMOGAIN] = { + .cmd_len = 0x7, + .cmd_id = WRITE_REGISTER_CMD, + .no_cmd_params = 0x4, + .cmd_params = {0x68, 0x01, 0x01, 0x51}, + .req = SYNC, + }, + [CMD_ISO14443A_PROTOCOL_SELECT] = { + .cmd_len = 0x7, + .cmd_id = PROTOCOL_SELECT_CMD, + .no_cmd_params = 0x4, + .cmd_params = {ISO14443A_PROTOCOL_CODE, 0x00, 0x01, 0xA0}, + .req = SYNC, + }, + [CMD_ISO14443B_PROTOCOL_SELECT] = { + .cmd_len = 0x7, + .cmd_id = PROTOCOL_SELECT_CMD, + .no_cmd_params = 0x4, + .cmd_params = {ISO14443B_PROTOCOL_CODE, 0x01, 0x03, 0xFF}, + .req = SYNC, + }, + [CMD_WTX_RESPONSE] = { + .cmd_len = 0x6, + .cmd_id = SEND_RECEIVE_CMD, + .no_cmd_params = 0x3, + .cmd_params = {0xF2, 0x00, TRFLAG_NFCA_STD_FRAME_CRC}, + .req = ASYNC, + }, + [CMD_FIELD_OFF] = { + .cmd_len = 0x5, + .cmd_id = PROTOCOL_SELECT_CMD, + .no_cmd_params = 0x2, + .cmd_params = {0x0, 0x0}, + .req = SYNC, + }, + [CMD_ISO15693_PROTOCOL_SELECT] = { + .cmd_len = 0x5, + .cmd_id = PROTOCOL_SELECT_CMD, + .no_cmd_params = 0x2, + .cmd_params = {ISO15693_PROTOCOL_CODE, 0x0D}, + .req = SYNC, + }, +}; + +/* st95_digital_cmd_complete_arg stores client context */ +struct st95_digital_cmd_complete_arg { + struct sk_buff *skb_resp; + nfc_digital_cmd_complete_t complete_cb; + void *cb_usrarg; + bool rats; +}; + +/* + * structure containing ST95HF driver specific data. + * @spicontext: structure containing information required + * for spi communication between st95hf and host. + * @ddev: nfc digital device object. + * @nfcdev: nfc device object. + * @enable_gpio: gpio used to enable st95hf transceiver. + * @complete_cb_arg: structure to store various context information + * that is passed from nfc requesting thread to the threaded ISR. + * @st95hf_supply: regulator "consumer" for NFC device. + * @sendrcv_trflag: last byte of frame send by sendrecv command + * of st95hf. This byte contains transmission flag info. + * @exchange_lock: semaphore used for signaling the st95hf_remove + * function that the last outstanding async nfc request is finished. + * @rm_lock: mutex for ensuring safe access of nfc digital object + * from threaded ISR. Usage of this mutex avoids any race between + * deletion of the object from st95hf_remove() and its access from + * the threaded ISR. + * @nfcdev_free: flag to have the state of nfc device object. + * [alive | died] + * @current_protocol: current nfc protocol. + * @current_rf_tech: current rf technology. + * @fwi: frame waiting index, received in reply of RATS according to + * digital protocol. + */ +struct st95hf_context { + struct st95hf_spi_context spicontext; + struct nfc_digital_dev *ddev; + struct nfc_dev *nfcdev; + unsigned int enable_gpio; + struct st95_digital_cmd_complete_arg complete_cb_arg; + struct regulator *st95hf_supply; + unsigned char sendrcv_trflag; + struct semaphore exchange_lock; + struct mutex rm_lock; + bool nfcdev_free; + u8 current_protocol; + u8 current_rf_tech; + int fwi; +}; + +/* + * st95hf_send_recv_cmd() is for sending commands to ST95HF + * that are described in the cmd_array[]. It can optionally + * receive the response if the cmd request is of type + * SYNC. For that to happen caller must pass true to recv_res. + * For ASYNC request, recv_res is ignored and the + * function will never try to receive the response on behalf + * of the caller. + */ +static int st95hf_send_recv_cmd(struct st95hf_context *st95context, + enum st95hf_cmd_list cmd, + int no_modif, + struct param_list *list_array, + bool recv_res) +{ + unsigned char spi_cmd_buffer[MAX_CMD_LEN]; + int i, ret; + struct device *dev = &st95context->spicontext.spidev->dev; + + if (cmd_array[cmd].cmd_len > MAX_CMD_LEN) + return -EINVAL; + if (cmd_array[cmd].no_cmd_params < no_modif) + return -EINVAL; + if (no_modif && !list_array) + return -EINVAL; + + spi_cmd_buffer[0] = ST95HF_COMMAND_SEND; + spi_cmd_buffer[1] = cmd_array[cmd].cmd_id; + spi_cmd_buffer[2] = cmd_array[cmd].no_cmd_params; + + memcpy(&spi_cmd_buffer[3], cmd_array[cmd].cmd_params, + spi_cmd_buffer[2]); + + for (i = 0; i < no_modif; i++) { + if (list_array[i].param_offset >= cmd_array[cmd].no_cmd_params) + return -EINVAL; + spi_cmd_buffer[3 + list_array[i].param_offset] = + list_array[i].new_param_val; + } + + ret = st95hf_spi_send(&st95context->spicontext, + spi_cmd_buffer, + cmd_array[cmd].cmd_len, + cmd_array[cmd].req); + if (ret) { + dev_err(dev, "st95hf_spi_send failed with error %d\n", ret); + return ret; + } + + if (cmd_array[cmd].req == SYNC && recv_res) { + unsigned char st95hf_response_arr[2]; + + ret = st95hf_spi_recv_response(&st95context->spicontext, + st95hf_response_arr); + if (ret < 0) { + dev_err(dev, "spi error from st95hf_spi_recv_response(), err = 0x%x\n", + ret); + return ret; + } + + if (st95hf_response_arr[0]) { + dev_err(dev, "st95hf error from st95hf_spi_recv_response(), err = 0x%x\n", + st95hf_response_arr[0]); + return -EIO; + } + } + + return 0; +} + +static int st95hf_echo_command(struct st95hf_context *st95context) +{ + int result = 0; + unsigned char echo_response; + + result = st95hf_send_recv_cmd(st95context, CMD_ECHO, 0, NULL, false); + if (result) + return result; + + /* If control reached here, response can be taken */ + result = st95hf_spi_recv_echo_res(&st95context->spicontext, + &echo_response); + if (result) { + dev_err(&st95context->spicontext.spidev->dev, + "err: echo response receieve error = 0x%x\n", result); + return result; + } + + if (echo_response == ECHORESPONSE) + return 0; + + dev_err(&st95context->spicontext.spidev->dev, "err: echo res is 0x%x\n", + echo_response); + + return -EIO; +} + +static int secondary_configuration_type4a(struct st95hf_context *stcontext) +{ + int result = 0; + struct device *dev = &stcontext->nfcdev->dev; + + /* 14443A config setting after select protocol */ + result = st95hf_send_recv_cmd(stcontext, + CMD_ISO14443A_CONFIG, + 0, + NULL, + true); + if (result) { + dev_err(dev, "type a config cmd, err = 0x%x\n", result); + return result; + } + + /* 14443A demo gain setting */ + result = st95hf_send_recv_cmd(stcontext, + CMD_ISO14443A_DEMOGAIN, + 0, + NULL, + true); + if (result) + dev_err(dev, "type a demogain cmd, err = 0x%x\n", result); + + return result; +} + +static int secondary_configuration_type4b(struct st95hf_context *stcontext) +{ + int result = 0; + struct device *dev = &stcontext->nfcdev->dev; + + result = st95hf_send_recv_cmd(stcontext, + CMD_ISO14443B_DEMOGAIN, + 0, + NULL, + true); + if (result) + dev_err(dev, "type b demogain cmd, err = 0x%x\n", result); + + return result; +} + +static int st95hf_select_protocol(struct st95hf_context *stcontext, int type) +{ + int result = 0; + struct device *dev; + + dev = &stcontext->nfcdev->dev; + + switch (type) { + case NFC_DIGITAL_RF_TECH_106A: + stcontext->current_rf_tech = NFC_DIGITAL_RF_TECH_106A; + result = st95hf_send_recv_cmd(stcontext, + CMD_ISO14443A_PROTOCOL_SELECT, + 0, + NULL, + true); + if (result) { + dev_err(dev, "protocol sel, err = 0x%x\n", + result); + return result; + } + + /* secondary config. for 14443Type 4A after protocol select */ + result = secondary_configuration_type4a(stcontext); + if (result) { + dev_err(dev, "type a secondary config, err = 0x%x\n", + result); + return result; + } + break; + case NFC_DIGITAL_RF_TECH_106B: + stcontext->current_rf_tech = NFC_DIGITAL_RF_TECH_106B; + result = st95hf_send_recv_cmd(stcontext, + CMD_ISO14443B_PROTOCOL_SELECT, + 0, + NULL, + true); + if (result) { + dev_err(dev, "protocol sel send, err = 0x%x\n", + result); + return result; + } + + /* + * delay of 5-6 ms is required after select protocol + * command in case of ISO14443 Type B + */ + usleep_range(50000, 60000); + + /* secondary config. for 14443Type 4B after protocol select */ + result = secondary_configuration_type4b(stcontext); + if (result) { + dev_err(dev, "type b secondary config, err = 0x%x\n", + result); + return result; + } + break; + case NFC_DIGITAL_RF_TECH_ISO15693: + stcontext->current_rf_tech = NFC_DIGITAL_RF_TECH_ISO15693; + result = st95hf_send_recv_cmd(stcontext, + CMD_ISO15693_PROTOCOL_SELECT, + 0, + NULL, + true); + if (result) { + dev_err(dev, "protocol sel send, err = 0x%x\n", + result); + return result; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static void st95hf_send_st95enable_negativepulse(struct st95hf_context *st95con) +{ + /* First make irq_in pin high */ + gpio_set_value(st95con->enable_gpio, HIGH); + + /* wait for 1 milisecond */ + usleep_range(1000, 2000); + + /* Make irq_in pin low */ + gpio_set_value(st95con->enable_gpio, LOW); + + /* wait for minimum interrupt pulse to make st95 active */ + usleep_range(1000, 2000); + + /* At end make it high */ + gpio_set_value(st95con->enable_gpio, HIGH); +} + +/* + * Send a reset sequence over SPI bus (Reset command + wait 3ms + + * negative pulse on st95hf enable gpio + */ +static int st95hf_send_spi_reset_sequence(struct st95hf_context *st95context) +{ + int result = 0; + unsigned char reset_cmd = ST95HF_COMMAND_RESET; + + result = st95hf_spi_send(&st95context->spicontext, + &reset_cmd, + ST95HF_RESET_CMD_LEN, + ASYNC); + if (result) { + dev_err(&st95context->spicontext.spidev->dev, + "spi reset sequence cmd error = %d", result); + return result; + } + + /* wait for 3 milisecond to complete the controller reset process */ + usleep_range(3000, 4000); + + /* send negative pulse to make st95hf active */ + st95hf_send_st95enable_negativepulse(st95context); + + /* wait for 10 milisecond : HFO setup time */ + usleep_range(10000, 20000); + + return result; +} + +static int st95hf_por_sequence(struct st95hf_context *st95context) +{ + int nth_attempt = 1; + int result; + + st95hf_send_st95enable_negativepulse(st95context); + + usleep_range(5000, 6000); + do { + /* send an ECHO command and checks ST95HF response */ + result = st95hf_echo_command(st95context); + + dev_dbg(&st95context->spicontext.spidev->dev, + "response from echo function = 0x%x, attempt = %d\n", + result, nth_attempt); + + if (!result) + return 0; + + /* send an pulse on IRQ in case of the chip is on sleep state */ + if (nth_attempt == 2) + st95hf_send_st95enable_negativepulse(st95context); + else + st95hf_send_spi_reset_sequence(st95context); + + /* delay of 50 milisecond */ + usleep_range(50000, 51000); + } while (nth_attempt++ < 3); + + return -ETIMEDOUT; +} + +static int iso14443_config_fdt(struct st95hf_context *st95context, int wtxm) +{ + int result = 0; + struct device *dev = &st95context->spicontext.spidev->dev; + struct nfc_digital_dev *nfcddev = st95context->ddev; + unsigned char pp_typeb; + struct param_list new_params[2]; + + pp_typeb = cmd_array[CMD_ISO14443B_PROTOCOL_SELECT].cmd_params[2]; + + if (nfcddev->curr_protocol == NFC_PROTO_ISO14443 && + st95context->fwi < 4) + st95context->fwi = 4; + + new_params[0].param_offset = 2; + if (nfcddev->curr_protocol == NFC_PROTO_ISO14443) + new_params[0].new_param_val = st95context->fwi; + else if (nfcddev->curr_protocol == NFC_PROTO_ISO14443_B) + new_params[0].new_param_val = pp_typeb; + + new_params[1].param_offset = 3; + new_params[1].new_param_val = wtxm; + + switch (nfcddev->curr_protocol) { + case NFC_PROTO_ISO14443: + result = st95hf_send_recv_cmd(st95context, + CMD_ISO14443A_PROTOCOL_SELECT, + 2, + new_params, + true); + if (result) { + dev_err(dev, "WTX type a sel proto, err = 0x%x\n", + result); + return result; + } + + /* secondary config. for 14443Type 4A after protocol select */ + result = secondary_configuration_type4a(st95context); + if (result) { + dev_err(dev, "WTX type a second. config, err = 0x%x\n", + result); + return result; + } + break; + case NFC_PROTO_ISO14443_B: + result = st95hf_send_recv_cmd(st95context, + CMD_ISO14443B_PROTOCOL_SELECT, + 2, + new_params, + true); + if (result) { + dev_err(dev, "WTX type b sel proto, err = 0x%x\n", + result); + return result; + } + + /* secondary config. for 14443Type 4B after protocol select */ + result = secondary_configuration_type4b(st95context); + if (result) { + dev_err(dev, "WTX type b second. config, err = 0x%x\n", + result); + return result; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static int st95hf_handle_wtx(struct st95hf_context *stcontext, + bool new_wtx, + int wtx_val) +{ + int result = 0; + unsigned char val_mm = 0; + struct param_list new_params[1]; + struct nfc_digital_dev *nfcddev = stcontext->ddev; + struct device *dev = &stcontext->nfcdev->dev; + + if (new_wtx) { + result = iso14443_config_fdt(stcontext, wtx_val & 0x3f); + if (result) { + dev_err(dev, "Config. setting error on WTX req, err = 0x%x\n", + result); + return result; + } + + /* Send response of wtx with ASYNC as no response expected */ + new_params[0].param_offset = 1; + new_params[0].new_param_val = wtx_val; + + result = st95hf_send_recv_cmd(stcontext, + CMD_WTX_RESPONSE, + 1, + new_params, + false); + if (result) + dev_err(dev, "WTX response send, err = 0x%x\n", result); + return result; + } + + /* if no new wtx, cofigure with default values */ + if (nfcddev->curr_protocol == NFC_PROTO_ISO14443) + val_mm = cmd_array[CMD_ISO14443A_PROTOCOL_SELECT].cmd_params[3]; + else if (nfcddev->curr_protocol == NFC_PROTO_ISO14443_B) + val_mm = cmd_array[CMD_ISO14443B_PROTOCOL_SELECT].cmd_params[3]; + + result = iso14443_config_fdt(stcontext, val_mm); + if (result) + dev_err(dev, "Default config. setting error after WTX processing, err = 0x%x\n", + result); + + return result; +} + +static int st95hf_error_handling(struct st95hf_context *stcontext, + struct sk_buff *skb_resp, + int res_len) +{ + int result = 0; + unsigned char error_byte; + struct device *dev = &stcontext->nfcdev->dev; + + /* First check ST95HF specific error */ + if (skb_resp->data[0] & ST95HF_ERR_MASK) { + if (skb_resp->data[0] == ST95HF_TIMEOUT_ERROR) + result = -ETIMEDOUT; + else + result = -EIO; + return result; + } + + /* Check for CRC err only if CRC is present in the tag response */ + switch (stcontext->current_rf_tech) { + case NFC_DIGITAL_RF_TECH_106A: + if (stcontext->sendrcv_trflag == TRFLAG_NFCA_STD_FRAME_CRC) { + error_byte = skb_resp->data[res_len - 3]; + if (error_byte & ST95HF_NFCA_CRC_ERR_MASK) { + /* CRC error occurred */ + dev_err(dev, "CRC error, byte received = 0x%x\n", + error_byte); + result = -EIO; + } + } + break; + case NFC_DIGITAL_RF_TECH_106B: + case NFC_DIGITAL_RF_TECH_ISO15693: + error_byte = skb_resp->data[res_len - 1]; + if (error_byte & ST95HF_NFCB_CRC_ERR_MASK) { + /* CRC error occurred */ + dev_err(dev, "CRC error, byte received = 0x%x\n", + error_byte); + result = -EIO; + } + break; + } + + return result; +} + +static int st95hf_response_handler(struct st95hf_context *stcontext, + struct sk_buff *skb_resp, + int res_len) +{ + int result = 0; + int skb_len; + unsigned char val_mm; + struct nfc_digital_dev *nfcddev = stcontext->ddev; + struct device *dev = &stcontext->nfcdev->dev; + struct st95_digital_cmd_complete_arg *cb_arg; + + cb_arg = &stcontext->complete_cb_arg; + + /* Process the response */ + skb_put(skb_resp, res_len); + + /* Remove st95 header */ + skb_pull(skb_resp, 2); + + skb_len = skb_resp->len; + + /* check if it is case of RATS request reply & FWI is present */ + if (nfcddev->curr_protocol == NFC_PROTO_ISO14443 && cb_arg->rats && + (skb_resp->data[1] & RATS_TB1_PRESENT_MASK)) { + if (skb_resp->data[1] & RATS_TA1_PRESENT_MASK) + stcontext->fwi = + (skb_resp->data[3] & TB1_FWI_MASK) >> 4; + else + stcontext->fwi = + (skb_resp->data[2] & TB1_FWI_MASK) >> 4; + + val_mm = cmd_array[CMD_ISO14443A_PROTOCOL_SELECT].cmd_params[3]; + + result = iso14443_config_fdt(stcontext, val_mm); + if (result) { + dev_err(dev, "error in config_fdt to handle fwi of ATS, error=%d\n", + result); + return result; + } + } + cb_arg->rats = false; + + /* Remove CRC bytes only if received frames data has an eod (CRC) */ + switch (stcontext->current_rf_tech) { + case NFC_DIGITAL_RF_TECH_106A: + if (stcontext->sendrcv_trflag == TRFLAG_NFCA_STD_FRAME_CRC) + skb_trim(skb_resp, (skb_len - 5)); + else + skb_trim(skb_resp, (skb_len - 3)); + break; + case NFC_DIGITAL_RF_TECH_106B: + case NFC_DIGITAL_RF_TECH_ISO15693: + skb_trim(skb_resp, (skb_len - 3)); + break; + } + + return result; +} + +static irqreturn_t st95hf_irq_handler(int irq, void *st95hfcontext) +{ + struct st95hf_context *stcontext = + (struct st95hf_context *)st95hfcontext; + + if (stcontext->spicontext.req_issync) { + complete(&stcontext->spicontext.done); + stcontext->spicontext.req_issync = false; + return IRQ_HANDLED; + } + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t st95hf_irq_thread_handler(int irq, void *st95hfcontext) +{ + int result = 0; + int res_len; + static bool wtx; + struct device *dev; + struct device *spidevice; + struct nfc_digital_dev *nfcddev; + struct sk_buff *skb_resp; + struct st95hf_context *stcontext = + (struct st95hf_context *)st95hfcontext; + struct st95_digital_cmd_complete_arg *cb_arg; + + spidevice = &stcontext->spicontext.spidev->dev; + + /* + * check semaphore, if not down() already, then we don't + * know in which context the ISR is called and surely it + * will be a bug. Note that down() of the semaphore is done + * in the corresponding st95hf_in_send_cmd() and then + * only this ISR should be called. ISR will up() the + * semaphore before leaving. Hence when the ISR is called + * the correct behaviour is down_trylock() should always + * return 1 (indicating semaphore cant be taken and hence no + * change in semaphore count). + * If not, then we up() the semaphore and crash on + * a BUG() ! + */ + if (!down_trylock(&stcontext->exchange_lock)) { + up(&stcontext->exchange_lock); + WARN(1, "unknown context in ST95HF ISR"); + return IRQ_NONE; + } + + cb_arg = &stcontext->complete_cb_arg; + skb_resp = cb_arg->skb_resp; + + mutex_lock(&stcontext->rm_lock); + res_len = st95hf_spi_recv_response(&stcontext->spicontext, + skb_resp->data); + if (res_len < 0) { + dev_err(spidevice, "TISR spi response err = 0x%x\n", res_len); + result = res_len; + goto end; + } + + /* if stcontext->nfcdev_free is true, it means remove already ran */ + if (stcontext->nfcdev_free) { + result = -ENODEV; + goto end; + } + + dev = &stcontext->nfcdev->dev; + nfcddev = stcontext->ddev; + if (skb_resp->data[2] == WTX_REQ_FROM_TAG) { + /* Request for new FWT from tag */ + result = st95hf_handle_wtx(stcontext, true, skb_resp->data[3]); + if (result) + goto end; + + wtx = true; + mutex_unlock(&stcontext->rm_lock); + return IRQ_HANDLED; + } + + result = st95hf_error_handling(stcontext, skb_resp, res_len); + if (result) + goto end; + + result = st95hf_response_handler(stcontext, skb_resp, res_len); + if (result) + goto end; + + /* + * If select protocol is done on wtx req. do select protocol + * again with default values + */ + if (wtx) { + wtx = false; + result = st95hf_handle_wtx(stcontext, false, 0); + if (result) + goto end; + } + + /* call digital layer callback */ + cb_arg->complete_cb(stcontext->ddev, cb_arg->cb_usrarg, skb_resp); + + /* up the semaphore before returning */ + up(&stcontext->exchange_lock); + mutex_unlock(&stcontext->rm_lock); + + return IRQ_HANDLED; + +end: + kfree_skb(skb_resp); + wtx = false; + cb_arg->rats = false; + skb_resp = ERR_PTR(result); + /* call of callback with error */ + cb_arg->complete_cb(stcontext->ddev, cb_arg->cb_usrarg, skb_resp); + /* up the semaphore before returning */ + up(&stcontext->exchange_lock); + mutex_unlock(&stcontext->rm_lock); + return IRQ_HANDLED; +} + +/* NFC ops functions definition */ +static int st95hf_in_configure_hw(struct nfc_digital_dev *ddev, + int type, + int param) +{ + struct st95hf_context *stcontext = nfc_digital_get_drvdata(ddev); + + if (type == NFC_DIGITAL_CONFIG_RF_TECH) + return st95hf_select_protocol(stcontext, param); + + if (type == NFC_DIGITAL_CONFIG_FRAMING) { + switch (param) { + case NFC_DIGITAL_FRAMING_NFCA_SHORT: + stcontext->sendrcv_trflag = TRFLAG_NFCA_SHORT_FRAME; + break; + case NFC_DIGITAL_FRAMING_NFCA_STANDARD: + stcontext->sendrcv_trflag = TRFLAG_NFCA_STD_FRAME; + break; + case NFC_DIGITAL_FRAMING_NFCA_T4T: + case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP: + case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A: + stcontext->sendrcv_trflag = TRFLAG_NFCA_STD_FRAME_CRC; + break; + case NFC_DIGITAL_FRAMING_NFCB: + case NFC_DIGITAL_FRAMING_ISO15693_INVENTORY: + case NFC_DIGITAL_FRAMING_ISO15693_T5T: + break; + } + } + + return 0; +} + +static int rf_off(struct st95hf_context *stcontext) +{ + int rc; + struct device *dev; + + dev = &stcontext->nfcdev->dev; + + rc = st95hf_send_recv_cmd(stcontext, CMD_FIELD_OFF, 0, NULL, true); + if (rc) + dev_err(dev, "protocol sel send field off, err = 0x%x\n", rc); + + return rc; +} + +static int st95hf_in_send_cmd(struct nfc_digital_dev *ddev, + struct sk_buff *skb, + u16 timeout, + nfc_digital_cmd_complete_t cb, + void *arg) +{ + struct st95hf_context *stcontext = nfc_digital_get_drvdata(ddev); + int rc; + struct sk_buff *skb_resp; + int len_data_to_tag = 0; + + skb_resp = nfc_alloc_recv_skb(MAX_RESPONSE_BUFFER_SIZE, GFP_KERNEL); + if (!skb_resp) { + rc = -ENOMEM; + goto error; + } + + switch (stcontext->current_rf_tech) { + case NFC_DIGITAL_RF_TECH_106A: + len_data_to_tag = skb->len + 1; + *skb_put(skb, 1) = stcontext->sendrcv_trflag; + break; + case NFC_DIGITAL_RF_TECH_106B: + case NFC_DIGITAL_RF_TECH_ISO15693: + len_data_to_tag = skb->len; + break; + default: + rc = -EINVAL; + goto free_skb_resp; + } + + skb_push(skb, 3); + skb->data[0] = ST95HF_COMMAND_SEND; + skb->data[1] = SEND_RECEIVE_CMD; + skb->data[2] = len_data_to_tag; + + stcontext->complete_cb_arg.skb_resp = skb_resp; + stcontext->complete_cb_arg.cb_usrarg = arg; + stcontext->complete_cb_arg.complete_cb = cb; + + if ((skb->data[3] == ISO14443A_RATS_REQ) && + ddev->curr_protocol == NFC_PROTO_ISO14443) + stcontext->complete_cb_arg.rats = true; + + /* + * down the semaphore to indicate to remove func that an + * ISR is pending, note that it will not block here in any case. + * If found blocked, it is a BUG! + */ + rc = down_killable(&stcontext->exchange_lock); + if (rc) { + WARN(1, "Semaphore is not found up in st95hf_in_send_cmd\n"); + return rc; + } + + rc = st95hf_spi_send(&stcontext->spicontext, skb->data, + skb->len, + ASYNC); + if (rc) { + dev_err(&stcontext->nfcdev->dev, + "Error %d trying to perform data_exchange", rc); + /* up the semaphore since ISR will never come in this case */ + up(&stcontext->exchange_lock); + goto free_skb_resp; + } + + kfree_skb(skb); + + return rc; + +free_skb_resp: + kfree_skb(skb_resp); +error: + return rc; +} + +/* p2p will be supported in a later release ! */ +static int st95hf_tg_configure_hw(struct nfc_digital_dev *ddev, + int type, + int param) +{ + return 0; +} + +static int st95hf_tg_send_cmd(struct nfc_digital_dev *ddev, + struct sk_buff *skb, + u16 timeout, + nfc_digital_cmd_complete_t cb, + void *arg) +{ + return 0; +} + +static int st95hf_tg_listen(struct nfc_digital_dev *ddev, + u16 timeout, + nfc_digital_cmd_complete_t cb, + void *arg) +{ + return 0; +} + +static int st95hf_tg_get_rf_tech(struct nfc_digital_dev *ddev, u8 *rf_tech) +{ + return 0; +} + +static int st95hf_switch_rf(struct nfc_digital_dev *ddev, bool on) +{ + u8 rf_tech; + struct st95hf_context *stcontext = nfc_digital_get_drvdata(ddev); + + rf_tech = ddev->curr_rf_tech; + + if (on) + /* switch on RF field */ + return st95hf_select_protocol(stcontext, rf_tech); + + /* switch OFF RF field */ + return rf_off(stcontext); +} + +/* TODO st95hf_abort_cmd */ +static void st95hf_abort_cmd(struct nfc_digital_dev *ddev) +{ +} + +static struct nfc_digital_ops st95hf_nfc_digital_ops = { + .in_configure_hw = st95hf_in_configure_hw, + .in_send_cmd = st95hf_in_send_cmd, + + .tg_listen = st95hf_tg_listen, + .tg_configure_hw = st95hf_tg_configure_hw, + .tg_send_cmd = st95hf_tg_send_cmd, + .tg_get_rf_tech = st95hf_tg_get_rf_tech, + + .switch_rf = st95hf_switch_rf, + .abort_cmd = st95hf_abort_cmd, +}; + +static const struct spi_device_id st95hf_id[] = { + { "st95hf", 0 }, + {} +}; +MODULE_DEVICE_TABLE(spi, st95hf_id); + +static int st95hf_probe(struct spi_device *nfc_spi_dev) +{ + int ret; + + struct st95hf_context *st95context; + struct st95hf_spi_context *spicontext; + + nfc_info(&nfc_spi_dev->dev, "ST95HF driver probe called.\n"); + + st95context = devm_kzalloc(&nfc_spi_dev->dev, + sizeof(struct st95hf_context), + GFP_KERNEL); + if (!st95context) + return -ENOMEM; + + spicontext = &st95context->spicontext; + + spicontext->spidev = nfc_spi_dev; + + st95context->fwi = + cmd_array[CMD_ISO14443A_PROTOCOL_SELECT].cmd_params[2]; + + if (device_property_present(&nfc_spi_dev->dev, "st95hfvin")) { + st95context->st95hf_supply = + devm_regulator_get(&nfc_spi_dev->dev, + "st95hfvin"); + if (IS_ERR(st95context->st95hf_supply)) { + dev_err(&nfc_spi_dev->dev, "failed to acquire regulator\n"); + return PTR_ERR(st95context->st95hf_supply); + } + + ret = regulator_enable(st95context->st95hf_supply); + if (ret) { + dev_err(&nfc_spi_dev->dev, "failed to enable regulator\n"); + return ret; + } + } + + init_completion(&spicontext->done); + mutex_init(&spicontext->spi_lock); + + /* + * Store spicontext in spi device object for using it in + * remove function + */ + dev_set_drvdata(&nfc_spi_dev->dev, spicontext); + + st95context->enable_gpio = + of_get_named_gpio(nfc_spi_dev->dev.of_node, + "enable-gpio", + 0); + if (!gpio_is_valid(st95context->enable_gpio)) { + dev_err(&nfc_spi_dev->dev, "No valid enable gpio\n"); + ret = st95context->enable_gpio; + goto err_disable_regulator; + } + + ret = devm_gpio_request_one(&nfc_spi_dev->dev, st95context->enable_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_HIGH, + "enable_gpio"); + if (ret) + goto err_disable_regulator; + + if (nfc_spi_dev->irq > 0) { + if (devm_request_threaded_irq(&nfc_spi_dev->dev, + nfc_spi_dev->irq, + st95hf_irq_handler, + st95hf_irq_thread_handler, + IRQF_TRIGGER_FALLING, + "st95hf", + (void *)st95context) < 0) { + dev_err(&nfc_spi_dev->dev, "err: irq request for st95hf is failed\n"); + ret = -EINVAL; + goto err_disable_regulator; + } + } else { + dev_err(&nfc_spi_dev->dev, "not a valid IRQ associated with ST95HF\n"); + ret = -EINVAL; + goto err_disable_regulator; + } + + /* + * First reset SPI to handle warm reset of the system. + * It will put the ST95HF device in Power ON state + * which make the state of device identical to state + * at the time of cold reset of the system. + */ + ret = st95hf_send_spi_reset_sequence(st95context); + if (ret) { + dev_err(&nfc_spi_dev->dev, "err: spi_reset_sequence failed\n"); + goto err_disable_regulator; + } + + /* call PowerOnReset sequence of ST95hf to activate it */ + ret = st95hf_por_sequence(st95context); + if (ret) { + dev_err(&nfc_spi_dev->dev, "err: por seq failed for st95hf\n"); + goto err_disable_regulator; + } + + /* create NFC dev object and register with NFC Subsystem */ + st95context->ddev = nfc_digital_allocate_device(&st95hf_nfc_digital_ops, + ST95HF_SUPPORTED_PROT, + ST95HF_CAPABILITIES, + ST95HF_HEADROOM_LEN, + ST95HF_TAILROOM_LEN); + if (!st95context->ddev) { + ret = -ENOMEM; + goto err_disable_regulator; + } + + st95context->nfcdev = st95context->ddev->nfc_dev; + nfc_digital_set_parent_dev(st95context->ddev, &nfc_spi_dev->dev); + + ret = nfc_digital_register_device(st95context->ddev); + if (ret) { + dev_err(&st95context->nfcdev->dev, "st95hf registration failed\n"); + goto err_free_digital_device; + } + + /* store st95context in nfc device object */ + nfc_digital_set_drvdata(st95context->ddev, st95context); + + sema_init(&st95context->exchange_lock, 1); + mutex_init(&st95context->rm_lock); + + return ret; + +err_free_digital_device: + nfc_digital_free_device(st95context->ddev); +err_disable_regulator: + if (st95context->st95hf_supply) + regulator_disable(st95context->st95hf_supply); + + return ret; +} + +static int st95hf_remove(struct spi_device *nfc_spi_dev) +{ + int result = 0; + unsigned char reset_cmd = ST95HF_COMMAND_RESET; + struct st95hf_spi_context *spictx = dev_get_drvdata(&nfc_spi_dev->dev); + + struct st95hf_context *stcontext = container_of(spictx, + struct st95hf_context, + spicontext); + + mutex_lock(&stcontext->rm_lock); + + nfc_digital_unregister_device(stcontext->ddev); + nfc_digital_free_device(stcontext->ddev); + stcontext->nfcdev_free = true; + + mutex_unlock(&stcontext->rm_lock); + + /* if last in_send_cmd's ISR is pending, wait for it to finish */ + result = down_killable(&stcontext->exchange_lock); + if (result == -EINTR) + dev_err(&spictx->spidev->dev, "sleep for semaphore interrupted by signal\n"); + + /* next reset the ST95HF controller */ + result = st95hf_spi_send(&stcontext->spicontext, + &reset_cmd, + ST95HF_RESET_CMD_LEN, + ASYNC); + if (result) { + dev_err(&spictx->spidev->dev, + "ST95HF reset failed in remove() err = %d\n", result); + return result; + } + + /* wait for 3 ms to complete the controller reset process */ + usleep_range(3000, 4000); + + /* disable regulator */ + if (stcontext->st95hf_supply) + regulator_disable(stcontext->st95hf_supply); + + return result; +} + +/* Register as SPI protocol driver */ +static struct spi_driver st95hf_driver = { + .driver = { + .name = "st95hf", + .owner = THIS_MODULE, + }, + .id_table = st95hf_id, + .probe = st95hf_probe, + .remove = st95hf_remove, +}; + +module_spi_driver(st95hf_driver); + +MODULE_AUTHOR("Shikha Singh <shikha.singh@st.com>"); +MODULE_DESCRIPTION("ST NFC Transceiver ST95HF driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/nfc/st95hf/spi.c b/drivers/nfc/st95hf/spi.c new file mode 100644 index 0000000..e2d3bbc --- /dev/null +++ b/drivers/nfc/st95hf/spi.c @@ -0,0 +1,167 @@ +/* + * ---------------------------------------------------------------------------- + * drivers/nfc/st95hf/spi.c function definitions for SPI communication + * ---------------------------------------------------------------------------- + * Copyright (C) 2015 STMicroelectronics Pvt. Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "spi.h" + +/* Function to send user provided buffer to ST95HF through SPI */ +int st95hf_spi_send(struct st95hf_spi_context *spicontext, + unsigned char *buffertx, + int datalen, + enum req_type reqtype) +{ + struct spi_message m; + int result = 0; + struct spi_device *spidev = spicontext->spidev; + struct spi_transfer tx_transfer = { + .tx_buf = buffertx, + .len = datalen, + }; + + mutex_lock(&spicontext->spi_lock); + + if (reqtype == SYNC) { + spicontext->req_issync = true; + reinit_completion(&spicontext->done); + } else { + spicontext->req_issync = false; + } + + spi_message_init(&m); + spi_message_add_tail(&tx_transfer, &m); + + result = spi_sync(spidev, &m); + if (result) { + dev_err(&spidev->dev, "error: sending cmd to st95hf using SPI = %d\n", + result); + mutex_unlock(&spicontext->spi_lock); + return result; + } + + /* return for asynchronous or no-wait case */ + if (reqtype == ASYNC) { + mutex_unlock(&spicontext->spi_lock); + return 0; + } + + result = wait_for_completion_timeout(&spicontext->done, + msecs_to_jiffies(1000)); + /* check for timeout or success */ + if (!result) { + dev_err(&spidev->dev, "error: response not ready timeout\n"); + result = -ETIMEDOUT; + } else { + result = 0; + } + + mutex_unlock(&spicontext->spi_lock); + + return result; +} +EXPORT_SYMBOL_GPL(st95hf_spi_send); + +/* Function to Receive command Response */ +int st95hf_spi_recv_response(struct st95hf_spi_context *spicontext, + unsigned char *receivebuff) +{ + int len = 0; + struct spi_transfer tx_takedata; + struct spi_message m; + struct spi_device *spidev = spicontext->spidev; + unsigned char readdata_cmd = ST95HF_COMMAND_RECEIVE; + struct spi_transfer t[2] = { + {.tx_buf = &readdata_cmd, .len = 1,}, + {.rx_buf = receivebuff, .len = 2, .cs_change = 1,}, + }; + + int ret = 0; + + memset(&tx_takedata, 0x0, sizeof(struct spi_transfer)); + + mutex_lock(&spicontext->spi_lock); + + /* First spi transfer to know the length of valid data */ + spi_message_init(&m); + spi_message_add_tail(&t[0], &m); + spi_message_add_tail(&t[1], &m); + + ret = spi_sync(spidev, &m); + if (ret) { + dev_err(&spidev->dev, "spi_recv_resp, data length error = %d\n", + ret); + mutex_unlock(&spicontext->spi_lock); + return ret; + } + + /* As 2 bytes are already read */ + len = 2; + + /* Support of long frame */ + if (receivebuff[0] & 0x60) + len += (((receivebuff[0] & 0x60) >> 5) << 8) | receivebuff[1]; + else + len += receivebuff[1]; + + /* Now make a transfer to read only relevant bytes */ + tx_takedata.rx_buf = &receivebuff[2]; + tx_takedata.len = len - 2; + + spi_message_init(&m); + spi_message_add_tail(&tx_takedata, &m); + + ret = spi_sync(spidev, &m); + + mutex_unlock(&spicontext->spi_lock); + if (ret) { + dev_err(&spidev->dev, "spi_recv_resp, data read error = %d\n", + ret); + return ret; + } + + return len; +} +EXPORT_SYMBOL_GPL(st95hf_spi_recv_response); + +int st95hf_spi_recv_echo_res(struct st95hf_spi_context *spicontext, + unsigned char *receivebuff) +{ + unsigned char readdata_cmd = ST95HF_COMMAND_RECEIVE; + struct spi_transfer t[2] = { + {.tx_buf = &readdata_cmd, .len = 1,}, + {.rx_buf = receivebuff, .len = 1,}, + }; + struct spi_message m; + struct spi_device *spidev = spicontext->spidev; + int ret = 0; + + mutex_lock(&spicontext->spi_lock); + + spi_message_init(&m); + spi_message_add_tail(&t[0], &m); + spi_message_add_tail(&t[1], &m); + ret = spi_sync(spidev, &m); + + mutex_unlock(&spicontext->spi_lock); + + if (ret) + dev_err(&spidev->dev, "recv_echo_res, data read error = %d\n", + ret); + + return ret; +} +EXPORT_SYMBOL_GPL(st95hf_spi_recv_echo_res); diff --git a/drivers/nfc/st95hf/spi.h b/drivers/nfc/st95hf/spi.h new file mode 100644 index 0000000..552d220 --- /dev/null +++ b/drivers/nfc/st95hf/spi.h @@ -0,0 +1,64 @@ +/* + * --------------------------------------------------------------------------- + * drivers/nfc/st95hf/spi.h functions declarations for SPI communication + * --------------------------------------------------------------------------- + * Copyright (C) 2015 STMicroelectronics – All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LINUX_ST95HF_SPI_H +#define __LINUX_ST95HF_SPI_H + +#include <linux/spi/spi.h> + +/* Basic ST95HF SPI CMDs */ +#define ST95HF_COMMAND_SEND 0x0 +#define ST95HF_COMMAND_RESET 0x1 +#define ST95HF_COMMAND_RECEIVE 0x2 + +#define ST95HF_RESET_CMD_LEN 0x1 + +/* + * structure to contain st95hf spi communication specific information. + * @req_issync: true for synchronous calls. + * @spidev: st95hf spi device object. + * @done: completion structure to wait for st95hf response + * for synchronous calls. + * @spi_lock: mutex to allow only one spi transfer at a time. + */ +struct st95hf_spi_context { + bool req_issync; + struct spi_device *spidev; + struct completion done; + struct mutex spi_lock; +}; + +/* flag to differentiate synchronous & asynchronous spi request */ +enum req_type { + SYNC, + ASYNC, +}; + +int st95hf_spi_send(struct st95hf_spi_context *spicontext, + unsigned char *buffertx, + int datalen, + enum req_type reqtype); + +int st95hf_spi_recv_response(struct st95hf_spi_context *spicontext, + unsigned char *receivebuff); + +int st95hf_spi_recv_echo_res(struct st95hf_spi_context *spicontext, + unsigned char *receivebuff); + +#endif diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c new file mode 100644 index 0000000..26c9dbb --- /dev/null +++ b/drivers/nfc/trf7970a.c @@ -0,0 +1,2245 @@ +/* + * TI TRF7970a RFID/NFC Transceiver Driver + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Erick Macias <emacias@ti.com> + * Author: Felipe Balbi <balbi@ti.com> + * Author: Mark A. Greer <mgreer@animalcreek.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/netdevice.h> +#include <linux/interrupt.h> +#include <linux/pm_runtime.h> +#include <linux/nfc.h> +#include <linux/skbuff.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/spi/spi.h> +#include <linux/regulator/consumer.h> + +#include <net/nfc/nfc.h> +#include <net/nfc/digital.h> + +/* There are 3 ways the host can communicate with the trf7970a: + * parallel mode, SPI with Slave Select (SS) mode, and SPI without + * SS mode. The driver only supports the two SPI modes. + * + * The trf7970a is very timing sensitive and the VIN, EN2, and EN + * pins must asserted in that order and with specific delays in between. + * The delays used in the driver were provided by TI and have been + * confirmed to work with this driver. There is a bug with the current + * version of the trf7970a that requires that EN2 remain low no matter + * what. If it goes high, it will generate an RF field even when in + * passive target mode. TI has indicated that the chip will work okay + * when EN2 is left low. The 'en2-rf-quirk' device tree property + * indicates that trf7970a currently being used has the erratum and + * that EN2 must be kept low. + * + * Timeouts are implemented using the delayed workqueue kernel facility. + * Timeouts are required so things don't hang when there is no response + * from the trf7970a (or tag). Using this mechanism creates a race with + * interrupts, however. That is, an interrupt and a timeout could occur + * closely enough together that one is blocked by the mutex while the other + * executes. When the timeout handler executes first and blocks the + * interrupt handler, it will eventually set the state to IDLE so the + * interrupt handler will check the state and exit with no harm done. + * When the interrupt handler executes first and blocks the timeout handler, + * the cancel_delayed_work() call will know that it didn't cancel the + * work item (i.e., timeout) and will return zero. That return code is + * used by the timer handler to indicate that it should ignore the timeout + * once its unblocked. + * + * Aborting an active command isn't as simple as it seems because the only + * way to abort a command that's already been sent to the tag is so turn + * off power to the tag. If we do that, though, we'd have to go through + * the entire anticollision procedure again but the digital layer doesn't + * support that. So, if an abort is received before trf7970a_send_cmd() + * has sent the command to the tag, it simply returns -ECANCELED. If the + * command has already been sent to the tag, then the driver continues + * normally and recieves the response data (or error) but just before + * sending the data upstream, it frees the rx_skb and sends -ECANCELED + * upstream instead. If the command failed, that error will be sent + * upstream. + * + * When recieving data from a tag and the interrupt status register has + * only the SRX bit set, it means that all of the data has been received + * (once what's in the fifo has been read). However, depending on timing + * an interrupt status with only the SRX bit set may not be recived. In + * those cases, the timeout mechanism is used to wait 20 ms in case more + * data arrives. After 20 ms, it is assumed that all of the data has been + * received and the accumulated rx data is sent upstream. The + * 'TRF7970A_ST_WAIT_FOR_RX_DATA_CONT' state is used for this purpose + * (i.e., it indicates that some data has been received but we're not sure + * if there is more coming so a timeout in this state means all data has + * been received and there isn't an error). The delay is 20 ms since delays + * of ~16 ms have been observed during testing. + * + * When transmitting a frame larger than the FIFO size (127 bytes), the + * driver will wait 20 ms for the FIFO to drain past the low-watermark + * and generate an interrupt. The low-watermark set to 32 bytes so the + * interrupt should fire after 127 - 32 = 95 bytes have been sent. At + * the lowest possible bit rate (6.62 kbps for 15693), it will take up + * to ~14.35 ms so 20 ms is used for the timeout. + * + * Type 2 write and sector select commands respond with a 4-bit ACK or NACK. + * Having only 4 bits in the FIFO won't normally generate an interrupt so + * driver enables the '4_bit_RX' bit of the Special Functions register 1 + * to cause an interrupt in that case. Leaving that bit for a read command + * messes up the data returned so it is only enabled when the framing is + * 'NFC_DIGITAL_FRAMING_NFCA_T2T' and the command is not a read command. + * Unfortunately, that means that the driver has to peek into tx frames + * when the framing is 'NFC_DIGITAL_FRAMING_NFCA_T2T'. This is done by + * the trf7970a_per_cmd_config() routine. + * + * ISO/IEC 15693 frames specify whether to use single or double sub-carrier + * frequencies and whether to use low or high data rates in the flags byte + * of the frame. This means that the driver has to peek at all 15693 frames + * to determine what speed to set the communication to. In addition, write + * and lock commands use the OPTION flag to indicate that an EOF must be + * sent to the tag before it will send its response. So the driver has to + * examine all frames for that reason too. + * + * It is unclear how long to wait before sending the EOF. According to the + * Note under Table 1-1 in section 1.6 of + * http://www.ti.com/lit/ug/scbu011/scbu011.pdf, that wait should be at least + * 10 ms for TI Tag-it HF-I tags; however testing has shown that is not long + * enough so 20 ms is used. So the timer is set to 40 ms - 20 ms to drain + * up to 127 bytes in the FIFO at the lowest bit rate plus another 20 ms to + * ensure the wait is long enough before sending the EOF. This seems to work + * reliably. + */ + +#define TRF7970A_SUPPORTED_PROTOCOLS \ + (NFC_PROTO_MIFARE_MASK | NFC_PROTO_ISO14443_MASK | \ + NFC_PROTO_ISO14443_B_MASK | NFC_PROTO_FELICA_MASK | \ + NFC_PROTO_ISO15693_MASK | NFC_PROTO_NFC_DEP_MASK) + +#define TRF7970A_AUTOSUSPEND_DELAY 30000 /* 30 seconds */ + +#define TRF7970A_RX_SKB_ALLOC_SIZE 256 + +#define TRF7970A_FIFO_SIZE 127 + +/* TX length is 3 nibbles long ==> 4KB - 1 bytes max */ +#define TRF7970A_TX_MAX (4096 - 1) + +#define TRF7970A_WAIT_FOR_TX_IRQ 20 +#define TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT 20 +#define TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT 20 +#define TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF 40 + +/* Guard times for various RF technologies (in us) */ +#define TRF7970A_GUARD_TIME_NFCA 5000 +#define TRF7970A_GUARD_TIME_NFCB 5000 +#define TRF7970A_GUARD_TIME_NFCF 20000 +#define TRF7970A_GUARD_TIME_15693 1000 + +/* Quirks */ +/* Erratum: When reading IRQ Status register on trf7970a, we must issue a + * read continuous command for IRQ Status and Collision Position registers. + */ +#define TRF7970A_QUIRK_IRQ_STATUS_READ BIT(0) +#define TRF7970A_QUIRK_EN2_MUST_STAY_LOW BIT(1) +#define TRF7970A_QUIRK_T5T_RMB_EXTRA_BYTE BIT(2) + +/* Direct commands */ +#define TRF7970A_CMD_IDLE 0x00 +#define TRF7970A_CMD_SOFT_INIT 0x03 +#define TRF7970A_CMD_RF_COLLISION 0x04 +#define TRF7970A_CMD_RF_COLLISION_RESPONSE_N 0x05 +#define TRF7970A_CMD_RF_COLLISION_RESPONSE_0 0x06 +#define TRF7970A_CMD_FIFO_RESET 0x0f +#define TRF7970A_CMD_TRANSMIT_NO_CRC 0x10 +#define TRF7970A_CMD_TRANSMIT 0x11 +#define TRF7970A_CMD_DELAY_TRANSMIT_NO_CRC 0x12 +#define TRF7970A_CMD_DELAY_TRANSMIT 0x13 +#define TRF7970A_CMD_EOF 0x14 +#define TRF7970A_CMD_CLOSE_SLOT 0x15 +#define TRF7970A_CMD_BLOCK_RX 0x16 +#define TRF7970A_CMD_ENABLE_RX 0x17 +#define TRF7970A_CMD_TEST_INT_RF 0x18 +#define TRF7970A_CMD_TEST_EXT_RF 0x19 +#define TRF7970A_CMD_RX_GAIN_ADJUST 0x1a + +/* Bits determining whether its a direct command or register R/W, + * whether to use a continuous SPI transaction or not, and the actual + * direct cmd opcode or regster address. + */ +#define TRF7970A_CMD_BIT_CTRL BIT(7) +#define TRF7970A_CMD_BIT_RW BIT(6) +#define TRF7970A_CMD_BIT_CONTINUOUS BIT(5) +#define TRF7970A_CMD_BIT_OPCODE(opcode) ((opcode) & 0x1f) + +/* Registers addresses */ +#define TRF7970A_CHIP_STATUS_CTRL 0x00 +#define TRF7970A_ISO_CTRL 0x01 +#define TRF7970A_ISO14443B_TX_OPTIONS 0x02 +#define TRF7970A_ISO14443A_HIGH_BITRATE_OPTIONS 0x03 +#define TRF7970A_TX_TIMER_SETTING_H_BYTE 0x04 +#define TRF7970A_TX_TIMER_SETTING_L_BYTE 0x05 +#define TRF7970A_TX_PULSE_LENGTH_CTRL 0x06 +#define TRF7970A_RX_NO_RESPONSE_WAIT 0x07 +#define TRF7970A_RX_WAIT_TIME 0x08 +#define TRF7970A_MODULATOR_SYS_CLK_CTRL 0x09 +#define TRF7970A_RX_SPECIAL_SETTINGS 0x0a +#define TRF7970A_REG_IO_CTRL 0x0b +#define TRF7970A_IRQ_STATUS 0x0c +#define TRF7970A_COLLISION_IRQ_MASK 0x0d +#define TRF7970A_COLLISION_POSITION 0x0e +#define TRF7970A_RSSI_OSC_STATUS 0x0f +#define TRF7970A_SPECIAL_FCN_REG1 0x10 +#define TRF7970A_SPECIAL_FCN_REG2 0x11 +#define TRF7970A_RAM1 0x12 +#define TRF7970A_RAM2 0x13 +#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS 0x14 +#define TRF7970A_NFC_LOW_FIELD_LEVEL 0x16 +#define TRF7970A_NFCID1 0x17 +#define TRF7970A_NFC_TARGET_LEVEL 0x18 +#define TRF79070A_NFC_TARGET_PROTOCOL 0x19 +#define TRF7970A_TEST_REGISTER1 0x1a +#define TRF7970A_TEST_REGISTER2 0x1b +#define TRF7970A_FIFO_STATUS 0x1c +#define TRF7970A_TX_LENGTH_BYTE1 0x1d +#define TRF7970A_TX_LENGTH_BYTE2 0x1e +#define TRF7970A_FIFO_IO_REGISTER 0x1f + +/* Chip Status Control Register Bits */ +#define TRF7970A_CHIP_STATUS_VRS5_3 BIT(0) +#define TRF7970A_CHIP_STATUS_REC_ON BIT(1) +#define TRF7970A_CHIP_STATUS_AGC_ON BIT(2) +#define TRF7970A_CHIP_STATUS_PM_ON BIT(3) +#define TRF7970A_CHIP_STATUS_RF_PWR BIT(4) +#define TRF7970A_CHIP_STATUS_RF_ON BIT(5) +#define TRF7970A_CHIP_STATUS_DIRECT BIT(6) +#define TRF7970A_CHIP_STATUS_STBY BIT(7) + +/* ISO Control Register Bits */ +#define TRF7970A_ISO_CTRL_15693_SGL_1OF4_662 0x00 +#define TRF7970A_ISO_CTRL_15693_SGL_1OF256_662 0x01 +#define TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648 0x02 +#define TRF7970A_ISO_CTRL_15693_SGL_1OF256_2648 0x03 +#define TRF7970A_ISO_CTRL_15693_DBL_1OF4_667a 0x04 +#define TRF7970A_ISO_CTRL_15693_DBL_1OF256_667 0x05 +#define TRF7970A_ISO_CTRL_15693_DBL_1OF4_2669 0x06 +#define TRF7970A_ISO_CTRL_15693_DBL_1OF256_2669 0x07 +#define TRF7970A_ISO_CTRL_14443A_106 0x08 +#define TRF7970A_ISO_CTRL_14443A_212 0x09 +#define TRF7970A_ISO_CTRL_14443A_424 0x0a +#define TRF7970A_ISO_CTRL_14443A_848 0x0b +#define TRF7970A_ISO_CTRL_14443B_106 0x0c +#define TRF7970A_ISO_CTRL_14443B_212 0x0d +#define TRF7970A_ISO_CTRL_14443B_424 0x0e +#define TRF7970A_ISO_CTRL_14443B_848 0x0f +#define TRF7970A_ISO_CTRL_FELICA_212 0x1a +#define TRF7970A_ISO_CTRL_FELICA_424 0x1b +#define TRF7970A_ISO_CTRL_NFC_NFCA_106 0x01 +#define TRF7970A_ISO_CTRL_NFC_NFCF_212 0x02 +#define TRF7970A_ISO_CTRL_NFC_NFCF_424 0x03 +#define TRF7970A_ISO_CTRL_NFC_CE_14443A 0x00 +#define TRF7970A_ISO_CTRL_NFC_CE_14443B 0x01 +#define TRF7970A_ISO_CTRL_NFC_CE BIT(2) +#define TRF7970A_ISO_CTRL_NFC_ACTIVE BIT(3) +#define TRF7970A_ISO_CTRL_NFC_INITIATOR BIT(4) +#define TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE BIT(5) +#define TRF7970A_ISO_CTRL_RFID BIT(5) +#define TRF7970A_ISO_CTRL_DIR_MODE BIT(6) +#define TRF7970A_ISO_CTRL_RX_CRC_N BIT(7) /* true == No CRC */ + +#define TRF7970A_ISO_CTRL_RFID_SPEED_MASK 0x1f + +/* Modulator and SYS_CLK Control Register Bits */ +#define TRF7970A_MODULATOR_DEPTH(n) ((n) & 0x7) +#define TRF7970A_MODULATOR_DEPTH_ASK10 (TRF7970A_MODULATOR_DEPTH(0)) +#define TRF7970A_MODULATOR_DEPTH_OOK (TRF7970A_MODULATOR_DEPTH(1)) +#define TRF7970A_MODULATOR_DEPTH_ASK7 (TRF7970A_MODULATOR_DEPTH(2)) +#define TRF7970A_MODULATOR_DEPTH_ASK8_5 (TRF7970A_MODULATOR_DEPTH(3)) +#define TRF7970A_MODULATOR_DEPTH_ASK13 (TRF7970A_MODULATOR_DEPTH(4)) +#define TRF7970A_MODULATOR_DEPTH_ASK16 (TRF7970A_MODULATOR_DEPTH(5)) +#define TRF7970A_MODULATOR_DEPTH_ASK22 (TRF7970A_MODULATOR_DEPTH(6)) +#define TRF7970A_MODULATOR_DEPTH_ASK30 (TRF7970A_MODULATOR_DEPTH(7)) +#define TRF7970A_MODULATOR_EN_ANA BIT(3) +#define TRF7970A_MODULATOR_CLK(n) (((n) & 0x3) << 4) +#define TRF7970A_MODULATOR_CLK_DISABLED (TRF7970A_MODULATOR_CLK(0)) +#define TRF7970A_MODULATOR_CLK_3_6 (TRF7970A_MODULATOR_CLK(1)) +#define TRF7970A_MODULATOR_CLK_6_13 (TRF7970A_MODULATOR_CLK(2)) +#define TRF7970A_MODULATOR_CLK_13_27 (TRF7970A_MODULATOR_CLK(3)) +#define TRF7970A_MODULATOR_EN_OOK BIT(6) +#define TRF7970A_MODULATOR_27MHZ BIT(7) + +#define TRF7970A_RX_SPECIAL_SETTINGS_NO_LIM BIT(0) +#define TRF7970A_RX_SPECIAL_SETTINGS_AGCR BIT(1) +#define TRF7970A_RX_SPECIAL_SETTINGS_GD_0DB (0x0 << 2) +#define TRF7970A_RX_SPECIAL_SETTINGS_GD_5DB (0x1 << 2) +#define TRF7970A_RX_SPECIAL_SETTINGS_GD_10DB (0x2 << 2) +#define TRF7970A_RX_SPECIAL_SETTINGS_GD_15DB (0x3 << 2) +#define TRF7970A_RX_SPECIAL_SETTINGS_HBT BIT(4) +#define TRF7970A_RX_SPECIAL_SETTINGS_M848 BIT(5) +#define TRF7970A_RX_SPECIAL_SETTINGS_C424 BIT(6) +#define TRF7970A_RX_SPECIAL_SETTINGS_C212 BIT(7) + +#define TRF7970A_REG_IO_CTRL_VRS(v) ((v) & 0x07) +#define TRF7970A_REG_IO_CTRL_IO_LOW BIT(5) +#define TRF7970A_REG_IO_CTRL_EN_EXT_PA BIT(6) +#define TRF7970A_REG_IO_CTRL_AUTO_REG BIT(7) + +/* IRQ Status Register Bits */ +#define TRF7970A_IRQ_STATUS_NORESP BIT(0) /* ISO15693 only */ +#define TRF7970A_IRQ_STATUS_NFC_COL_ERROR BIT(0) +#define TRF7970A_IRQ_STATUS_COL BIT(1) +#define TRF7970A_IRQ_STATUS_FRAMING_EOF_ERROR BIT(2) +#define TRF7970A_IRQ_STATUS_NFC_RF BIT(2) +#define TRF7970A_IRQ_STATUS_PARITY_ERROR BIT(3) +#define TRF7970A_IRQ_STATUS_NFC_SDD BIT(3) +#define TRF7970A_IRQ_STATUS_CRC_ERROR BIT(4) +#define TRF7970A_IRQ_STATUS_NFC_PROTO_ERROR BIT(4) +#define TRF7970A_IRQ_STATUS_FIFO BIT(5) +#define TRF7970A_IRQ_STATUS_SRX BIT(6) +#define TRF7970A_IRQ_STATUS_TX BIT(7) + +#define TRF7970A_IRQ_STATUS_ERROR \ + (TRF7970A_IRQ_STATUS_COL | \ + TRF7970A_IRQ_STATUS_FRAMING_EOF_ERROR | \ + TRF7970A_IRQ_STATUS_PARITY_ERROR | \ + TRF7970A_IRQ_STATUS_CRC_ERROR) + +#define TRF7970A_RSSI_OSC_STATUS_RSSI_MASK (BIT(2) | BIT(1) | BIT(0)) +#define TRF7970A_RSSI_OSC_STATUS_RSSI_X_MASK (BIT(5) | BIT(4) | BIT(3)) +#define TRF7970A_RSSI_OSC_STATUS_RSSI_OSC_OK BIT(6) + +#define TRF7970A_SPECIAL_FCN_REG1_COL_7_6 BIT(0) +#define TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL BIT(1) +#define TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX BIT(2) +#define TRF7970A_SPECIAL_FCN_REG1_SP_DIR_MODE BIT(3) +#define TRF7970A_SPECIAL_FCN_REG1_NEXT_SLOT_37US BIT(4) +#define TRF7970A_SPECIAL_FCN_REG1_PAR43 BIT(5) + +#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_124 (0x0 << 2) +#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_120 (0x1 << 2) +#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_112 (0x2 << 2) +#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_96 (0x3 << 2) +#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_4 0x0 +#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_8 0x1 +#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_16 0x2 +#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_32 0x3 + +#define TRF7970A_NFC_LOW_FIELD_LEVEL_RFDET(v) ((v) & 0x07) +#define TRF7970A_NFC_LOW_FIELD_LEVEL_CLEX_DIS BIT(7) + +#define TRF7970A_NFC_TARGET_LEVEL_RFDET(v) ((v) & 0x07) +#define TRF7970A_NFC_TARGET_LEVEL_HI_RF BIT(3) +#define TRF7970A_NFC_TARGET_LEVEL_SDD_EN BIT(5) +#define TRF7970A_NFC_TARGET_LEVEL_LD_S_4BYTES (0x0 << 6) +#define TRF7970A_NFC_TARGET_LEVEL_LD_S_7BYTES (0x1 << 6) +#define TRF7970A_NFC_TARGET_LEVEL_LD_S_10BYTES (0x2 << 6) + +#define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106 BIT(0) +#define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_212 BIT(1) +#define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_424 (BIT(0) | BIT(1)) +#define TRF79070A_NFC_TARGET_PROTOCOL_PAS_14443B BIT(2) +#define TRF79070A_NFC_TARGET_PROTOCOL_PAS_106 BIT(3) +#define TRF79070A_NFC_TARGET_PROTOCOL_FELICA BIT(4) +#define TRF79070A_NFC_TARGET_PROTOCOL_RF_L BIT(6) +#define TRF79070A_NFC_TARGET_PROTOCOL_RF_H BIT(7) + +#define TRF79070A_NFC_TARGET_PROTOCOL_106A \ + (TRF79070A_NFC_TARGET_PROTOCOL_RF_H | \ + TRF79070A_NFC_TARGET_PROTOCOL_RF_L | \ + TRF79070A_NFC_TARGET_PROTOCOL_PAS_106 | \ + TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106) + +#define TRF79070A_NFC_TARGET_PROTOCOL_106B \ + (TRF79070A_NFC_TARGET_PROTOCOL_RF_H | \ + TRF79070A_NFC_TARGET_PROTOCOL_RF_L | \ + TRF79070A_NFC_TARGET_PROTOCOL_PAS_14443B | \ + TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106) + +#define TRF79070A_NFC_TARGET_PROTOCOL_212F \ + (TRF79070A_NFC_TARGET_PROTOCOL_RF_H | \ + TRF79070A_NFC_TARGET_PROTOCOL_RF_L | \ + TRF79070A_NFC_TARGET_PROTOCOL_FELICA | \ + TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_212) + +#define TRF79070A_NFC_TARGET_PROTOCOL_424F \ + (TRF79070A_NFC_TARGET_PROTOCOL_RF_H | \ + TRF79070A_NFC_TARGET_PROTOCOL_RF_L | \ + TRF79070A_NFC_TARGET_PROTOCOL_FELICA | \ + TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_424) + +#define TRF7970A_FIFO_STATUS_OVERFLOW BIT(7) + +/* NFC (ISO/IEC 14443A) Type 2 Tag commands */ +#define NFC_T2T_CMD_READ 0x30 + +/* ISO 15693 commands codes */ +#define ISO15693_CMD_INVENTORY 0x01 +#define ISO15693_CMD_READ_SINGLE_BLOCK 0x20 +#define ISO15693_CMD_WRITE_SINGLE_BLOCK 0x21 +#define ISO15693_CMD_LOCK_BLOCK 0x22 +#define ISO15693_CMD_READ_MULTIPLE_BLOCK 0x23 +#define ISO15693_CMD_WRITE_MULTIPLE_BLOCK 0x24 +#define ISO15693_CMD_SELECT 0x25 +#define ISO15693_CMD_RESET_TO_READY 0x26 +#define ISO15693_CMD_WRITE_AFI 0x27 +#define ISO15693_CMD_LOCK_AFI 0x28 +#define ISO15693_CMD_WRITE_DSFID 0x29 +#define ISO15693_CMD_LOCK_DSFID 0x2a +#define ISO15693_CMD_GET_SYSTEM_INFO 0x2b +#define ISO15693_CMD_GET_MULTIPLE_BLOCK_SECURITY_STATUS 0x2c + +/* ISO 15693 request and response flags */ +#define ISO15693_REQ_FLAG_SUB_CARRIER BIT(0) +#define ISO15693_REQ_FLAG_DATA_RATE BIT(1) +#define ISO15693_REQ_FLAG_INVENTORY BIT(2) +#define ISO15693_REQ_FLAG_PROTOCOL_EXT BIT(3) +#define ISO15693_REQ_FLAG_SELECT BIT(4) +#define ISO15693_REQ_FLAG_AFI BIT(4) +#define ISO15693_REQ_FLAG_ADDRESS BIT(5) +#define ISO15693_REQ_FLAG_NB_SLOTS BIT(5) +#define ISO15693_REQ_FLAG_OPTION BIT(6) + +#define ISO15693_REQ_FLAG_SPEED_MASK \ + (ISO15693_REQ_FLAG_SUB_CARRIER | ISO15693_REQ_FLAG_DATA_RATE) + +enum trf7970a_state { + TRF7970A_ST_PWR_OFF, + TRF7970A_ST_RF_OFF, + TRF7970A_ST_IDLE, + TRF7970A_ST_IDLE_RX_BLOCKED, + TRF7970A_ST_WAIT_FOR_TX_FIFO, + TRF7970A_ST_WAIT_FOR_RX_DATA, + TRF7970A_ST_WAIT_FOR_RX_DATA_CONT, + TRF7970A_ST_WAIT_TO_ISSUE_EOF, + TRF7970A_ST_LISTENING, + TRF7970A_ST_LISTENING_MD, + TRF7970A_ST_MAX +}; + +struct trf7970a { + enum trf7970a_state state; + struct device *dev; + struct spi_device *spi; + struct regulator *regulator; + struct nfc_digital_dev *ddev; + u32 quirks; + bool is_initiator; + bool aborting; + struct sk_buff *tx_skb; + struct sk_buff *rx_skb; + nfc_digital_cmd_complete_t cb; + void *cb_arg; + u8 chip_status_ctrl; + u8 iso_ctrl; + u8 iso_ctrl_tech; + u8 modulator_sys_clk_ctrl; + u8 special_fcn_reg1; + unsigned int guard_time; + int technology; + int framing; + u8 md_rf_tech; + u8 tx_cmd; + bool issue_eof; + bool adjust_resp_len; + int en2_gpio; + int en_gpio; + struct mutex lock; + unsigned int timeout; + bool ignore_timeout; + struct delayed_work timeout_work; +}; + + +static int trf7970a_cmd(struct trf7970a *trf, u8 opcode) +{ + u8 cmd = TRF7970A_CMD_BIT_CTRL | TRF7970A_CMD_BIT_OPCODE(opcode); + int ret; + + dev_dbg(trf->dev, "cmd: 0x%x\n", cmd); + + ret = spi_write(trf->spi, &cmd, 1); + if (ret) + dev_err(trf->dev, "%s - cmd: 0x%x, ret: %d\n", __func__, cmd, + ret); + return ret; +} + +static int trf7970a_read(struct trf7970a *trf, u8 reg, u8 *val) +{ + u8 addr = TRF7970A_CMD_BIT_RW | reg; + int ret; + + ret = spi_write_then_read(trf->spi, &addr, 1, val, 1); + if (ret) + dev_err(trf->dev, "%s - addr: 0x%x, ret: %d\n", __func__, addr, + ret); + + dev_dbg(trf->dev, "read(0x%x): 0x%x\n", addr, *val); + + return ret; +} + +static int trf7970a_read_cont(struct trf7970a *trf, u8 reg, u8 *buf, size_t len) +{ + u8 addr = reg | TRF7970A_CMD_BIT_RW | TRF7970A_CMD_BIT_CONTINUOUS; + struct spi_transfer t[2]; + struct spi_message m; + int ret; + + dev_dbg(trf->dev, "read_cont(0x%x, %zd)\n", addr, len); + + spi_message_init(&m); + + memset(&t, 0, sizeof(t)); + + t[0].tx_buf = &addr; + t[0].len = sizeof(addr); + spi_message_add_tail(&t[0], &m); + + t[1].rx_buf = buf; + t[1].len = len; + spi_message_add_tail(&t[1], &m); + + ret = spi_sync(trf->spi, &m); + if (ret) + dev_err(trf->dev, "%s - addr: 0x%x, ret: %d\n", __func__, addr, + ret); + return ret; +} + +static int trf7970a_write(struct trf7970a *trf, u8 reg, u8 val) +{ + u8 buf[2] = { reg, val }; + int ret; + + dev_dbg(trf->dev, "write(0x%x): 0x%x\n", reg, val); + + ret = spi_write(trf->spi, buf, 2); + if (ret) + dev_err(trf->dev, "%s - write: 0x%x 0x%x, ret: %d\n", __func__, + buf[0], buf[1], ret); + + return ret; +} + +static int trf7970a_read_irqstatus(struct trf7970a *trf, u8 *status) +{ + int ret; + u8 buf[2]; + u8 addr; + + addr = TRF7970A_IRQ_STATUS | TRF7970A_CMD_BIT_RW; + + if (trf->quirks & TRF7970A_QUIRK_IRQ_STATUS_READ) { + addr |= TRF7970A_CMD_BIT_CONTINUOUS; + ret = spi_write_then_read(trf->spi, &addr, 1, buf, 2); + } else { + ret = spi_write_then_read(trf->spi, &addr, 1, buf, 1); + } + + if (ret) + dev_err(trf->dev, "%s - irqstatus: Status read failed: %d\n", + __func__, ret); + else + *status = buf[0]; + + return ret; +} + +static int trf7970a_read_target_proto(struct trf7970a *trf, u8 *target_proto) +{ + int ret; + u8 buf[2]; + u8 addr; + + addr = TRF79070A_NFC_TARGET_PROTOCOL | TRF7970A_CMD_BIT_RW | + TRF7970A_CMD_BIT_CONTINUOUS; + + ret = spi_write_then_read(trf->spi, &addr, 1, buf, 2); + if (ret) + dev_err(trf->dev, "%s - target_proto: Read failed: %d\n", + __func__, ret); + else + *target_proto = buf[0]; + + return ret; +} + +static int trf7970a_mode_detect(struct trf7970a *trf, u8 *rf_tech) +{ + int ret; + u8 target_proto, tech; + + ret = trf7970a_read_target_proto(trf, &target_proto); + if (ret) + return ret; + + switch (target_proto) { + case TRF79070A_NFC_TARGET_PROTOCOL_106A: + tech = NFC_DIGITAL_RF_TECH_106A; + break; + case TRF79070A_NFC_TARGET_PROTOCOL_106B: + tech = NFC_DIGITAL_RF_TECH_106B; + break; + case TRF79070A_NFC_TARGET_PROTOCOL_212F: + tech = NFC_DIGITAL_RF_TECH_212F; + break; + case TRF79070A_NFC_TARGET_PROTOCOL_424F: + tech = NFC_DIGITAL_RF_TECH_424F; + break; + default: + dev_dbg(trf->dev, "%s - mode_detect: target_proto: 0x%x\n", + __func__, target_proto); + return -EIO; + } + + *rf_tech = tech; + + return ret; +} + +static void trf7970a_send_upstream(struct trf7970a *trf) +{ + dev_kfree_skb_any(trf->tx_skb); + trf->tx_skb = NULL; + + if (trf->rx_skb && !IS_ERR(trf->rx_skb) && !trf->aborting) + print_hex_dump_debug("trf7970a rx data: ", DUMP_PREFIX_NONE, + 16, 1, trf->rx_skb->data, trf->rx_skb->len, + false); + + trf->state = TRF7970A_ST_IDLE; + + if (trf->aborting) { + dev_dbg(trf->dev, "Abort process complete\n"); + + if (!IS_ERR(trf->rx_skb)) { + kfree_skb(trf->rx_skb); + trf->rx_skb = ERR_PTR(-ECANCELED); + } + + trf->aborting = false; + } + + if (trf->adjust_resp_len) { + if (trf->rx_skb) + skb_trim(trf->rx_skb, trf->rx_skb->len - 1); + + trf->adjust_resp_len = false; + } + + trf->cb(trf->ddev, trf->cb_arg, trf->rx_skb); + + trf->rx_skb = NULL; +} + +static void trf7970a_send_err_upstream(struct trf7970a *trf, int errno) +{ + dev_dbg(trf->dev, "Error - state: %d, errno: %d\n", trf->state, errno); + + cancel_delayed_work(&trf->timeout_work); + + kfree_skb(trf->rx_skb); + trf->rx_skb = ERR_PTR(errno); + + trf7970a_send_upstream(trf); +} + +static int trf7970a_transmit(struct trf7970a *trf, struct sk_buff *skb, + unsigned int len, u8 *prefix, unsigned int prefix_len) +{ + struct spi_transfer t[2]; + struct spi_message m; + unsigned int timeout; + int ret; + + print_hex_dump_debug("trf7970a tx data: ", DUMP_PREFIX_NONE, + 16, 1, skb->data, len, false); + + spi_message_init(&m); + + memset(&t, 0, sizeof(t)); + + t[0].tx_buf = prefix; + t[0].len = prefix_len; + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = skb->data; + t[1].len = len; + spi_message_add_tail(&t[1], &m); + + ret = spi_sync(trf->spi, &m); + if (ret) { + dev_err(trf->dev, "%s - Can't send tx data: %d\n", __func__, + ret); + return ret; + } + + skb_pull(skb, len); + + if (skb->len > 0) { + trf->state = TRF7970A_ST_WAIT_FOR_TX_FIFO; + timeout = TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT; + } else { + if (trf->issue_eof) { + trf->state = TRF7970A_ST_WAIT_TO_ISSUE_EOF; + timeout = TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF; + } else { + trf->state = TRF7970A_ST_WAIT_FOR_RX_DATA; + + if (!trf->timeout) + timeout = TRF7970A_WAIT_FOR_TX_IRQ; + else + timeout = trf->timeout; + } + } + + dev_dbg(trf->dev, "Setting timeout for %d ms, state: %d\n", timeout, + trf->state); + + schedule_delayed_work(&trf->timeout_work, msecs_to_jiffies(timeout)); + + return 0; +} + +static void trf7970a_fill_fifo(struct trf7970a *trf) +{ + struct sk_buff *skb = trf->tx_skb; + unsigned int len; + int ret; + u8 fifo_bytes; + u8 prefix; + + ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS, &fifo_bytes); + if (ret) { + trf7970a_send_err_upstream(trf, ret); + return; + } + + dev_dbg(trf->dev, "Filling FIFO - fifo_bytes: 0x%x\n", fifo_bytes); + + fifo_bytes &= ~TRF7970A_FIFO_STATUS_OVERFLOW; + + /* Calculate how much more data can be written to the fifo */ + len = TRF7970A_FIFO_SIZE - fifo_bytes; + if (!len) { + schedule_delayed_work(&trf->timeout_work, + msecs_to_jiffies(TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT)); + return; + } + + len = min(skb->len, len); + + prefix = TRF7970A_CMD_BIT_CONTINUOUS | TRF7970A_FIFO_IO_REGISTER; + + ret = trf7970a_transmit(trf, skb, len, &prefix, sizeof(prefix)); + if (ret) + trf7970a_send_err_upstream(trf, ret); +} + +static void trf7970a_drain_fifo(struct trf7970a *trf, u8 status) +{ + struct sk_buff *skb = trf->rx_skb; + int ret; + u8 fifo_bytes; + + if (status & TRF7970A_IRQ_STATUS_ERROR) { + trf7970a_send_err_upstream(trf, -EIO); + return; + } + + ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS, &fifo_bytes); + if (ret) { + trf7970a_send_err_upstream(trf, ret); + return; + } + + dev_dbg(trf->dev, "Draining FIFO - fifo_bytes: 0x%x\n", fifo_bytes); + + fifo_bytes &= ~TRF7970A_FIFO_STATUS_OVERFLOW; + + if (!fifo_bytes) + goto no_rx_data; + + if (fifo_bytes > skb_tailroom(skb)) { + skb = skb_copy_expand(skb, skb_headroom(skb), + max_t(int, fifo_bytes, + TRF7970A_RX_SKB_ALLOC_SIZE), + GFP_KERNEL); + if (!skb) { + trf7970a_send_err_upstream(trf, -ENOMEM); + return; + } + + kfree_skb(trf->rx_skb); + trf->rx_skb = skb; + } + + ret = trf7970a_read_cont(trf, TRF7970A_FIFO_IO_REGISTER, + skb_put(skb, fifo_bytes), fifo_bytes); + if (ret) { + trf7970a_send_err_upstream(trf, ret); + return; + } + + /* If received Type 2 ACK/NACK, shift right 4 bits and pass up */ + if ((trf->framing == NFC_DIGITAL_FRAMING_NFCA_T2T) && (skb->len == 1) && + (trf->special_fcn_reg1 == + TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX)) { + skb->data[0] >>= 4; + status = TRF7970A_IRQ_STATUS_SRX; + } else { + trf->state = TRF7970A_ST_WAIT_FOR_RX_DATA_CONT; + + ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS, &fifo_bytes); + if (ret) { + trf7970a_send_err_upstream(trf, ret); + return; + } + + fifo_bytes &= ~TRF7970A_FIFO_STATUS_OVERFLOW; + + /* If there are bytes in the FIFO, set status to '0' so + * the if stmt below doesn't fire and the driver will wait + * for the trf7970a to generate another RX interrupt. + */ + if (fifo_bytes) + status = 0; + } + +no_rx_data: + if (status == TRF7970A_IRQ_STATUS_SRX) { /* Receive complete */ + trf7970a_send_upstream(trf); + return; + } + + dev_dbg(trf->dev, "Setting timeout for %d ms\n", + TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT); + + schedule_delayed_work(&trf->timeout_work, + msecs_to_jiffies(TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT)); +} + +static irqreturn_t trf7970a_irq(int irq, void *dev_id) +{ + struct trf7970a *trf = dev_id; + int ret; + u8 status, fifo_bytes, iso_ctrl; + + mutex_lock(&trf->lock); + + if (trf->state == TRF7970A_ST_RF_OFF) { + mutex_unlock(&trf->lock); + return IRQ_NONE; + } + + ret = trf7970a_read_irqstatus(trf, &status); + if (ret) { + mutex_unlock(&trf->lock); + return IRQ_NONE; + } + + dev_dbg(trf->dev, "IRQ - state: %d, status: 0x%x\n", trf->state, + status); + + if (!status) { + mutex_unlock(&trf->lock); + return IRQ_NONE; + } + + switch (trf->state) { + case TRF7970A_ST_IDLE: + case TRF7970A_ST_IDLE_RX_BLOCKED: + /* If initiator and getting interrupts caused by RF noise, + * turn off the receiver to avoid unnecessary interrupts. + * It will be turned back on in trf7970a_send_cmd() when + * the next command is issued. + */ + if (trf->is_initiator && (status & TRF7970A_IRQ_STATUS_ERROR)) { + trf7970a_cmd(trf, TRF7970A_CMD_BLOCK_RX); + trf->state = TRF7970A_ST_IDLE_RX_BLOCKED; + } + + trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET); + break; + case TRF7970A_ST_WAIT_FOR_TX_FIFO: + if (status & TRF7970A_IRQ_STATUS_TX) { + trf->ignore_timeout = + !cancel_delayed_work(&trf->timeout_work); + trf7970a_fill_fifo(trf); + } else { + trf7970a_send_err_upstream(trf, -EIO); + } + break; + case TRF7970A_ST_WAIT_FOR_RX_DATA: + case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT: + if (status & TRF7970A_IRQ_STATUS_SRX) { + trf->ignore_timeout = + !cancel_delayed_work(&trf->timeout_work); + trf7970a_drain_fifo(trf, status); + } else if (status & TRF7970A_IRQ_STATUS_FIFO) { + ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS, + &fifo_bytes); + + fifo_bytes &= ~TRF7970A_FIFO_STATUS_OVERFLOW; + + if (ret) + trf7970a_send_err_upstream(trf, ret); + else if (!fifo_bytes) + trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET); + } else if ((status == TRF7970A_IRQ_STATUS_TX) || + (!trf->is_initiator && + (status == (TRF7970A_IRQ_STATUS_TX | + TRF7970A_IRQ_STATUS_NFC_RF)))) { + trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET); + + if (!trf->timeout) { + trf->ignore_timeout = !cancel_delayed_work( + &trf->timeout_work); + trf->rx_skb = ERR_PTR(0); + trf7970a_send_upstream(trf); + break; + } + + if (trf->is_initiator) + break; + + iso_ctrl = trf->iso_ctrl; + + switch (trf->framing) { + case NFC_DIGITAL_FRAMING_NFCA_STANDARD: + trf->tx_cmd = TRF7970A_CMD_TRANSMIT_NO_CRC; + iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N; + trf->iso_ctrl = 0xff; /* Force ISO_CTRL write */ + break; + case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A: + trf->tx_cmd = TRF7970A_CMD_TRANSMIT; + iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N; + trf->iso_ctrl = 0xff; /* Force ISO_CTRL write */ + break; + case NFC_DIGITAL_FRAMING_NFCA_ANTICOL_COMPLETE: + ret = trf7970a_write(trf, + TRF7970A_SPECIAL_FCN_REG1, + TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL); + if (ret) + goto err_unlock_exit; + + trf->special_fcn_reg1 = + TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL; + break; + default: + break; + } + + if (iso_ctrl != trf->iso_ctrl) { + ret = trf7970a_write(trf, TRF7970A_ISO_CTRL, + iso_ctrl); + if (ret) + goto err_unlock_exit; + + trf->iso_ctrl = iso_ctrl; + } + } else { + trf7970a_send_err_upstream(trf, -EIO); + } + break; + case TRF7970A_ST_WAIT_TO_ISSUE_EOF: + if (status != TRF7970A_IRQ_STATUS_TX) + trf7970a_send_err_upstream(trf, -EIO); + break; + case TRF7970A_ST_LISTENING: + if (status & TRF7970A_IRQ_STATUS_SRX) { + trf->ignore_timeout = + !cancel_delayed_work(&trf->timeout_work); + trf7970a_drain_fifo(trf, status); + } else if (!(status & TRF7970A_IRQ_STATUS_NFC_RF)) { + trf7970a_send_err_upstream(trf, -EIO); + } + break; + case TRF7970A_ST_LISTENING_MD: + if (status & TRF7970A_IRQ_STATUS_SRX) { + trf->ignore_timeout = + !cancel_delayed_work(&trf->timeout_work); + + ret = trf7970a_mode_detect(trf, &trf->md_rf_tech); + if (ret) { + trf7970a_send_err_upstream(trf, ret); + } else { + trf->state = TRF7970A_ST_LISTENING; + trf7970a_drain_fifo(trf, status); + } + } else if (!(status & TRF7970A_IRQ_STATUS_NFC_RF)) { + trf7970a_send_err_upstream(trf, -EIO); + } + break; + default: + dev_err(trf->dev, "%s - Driver in invalid state: %d\n", + __func__, trf->state); + } + +err_unlock_exit: + mutex_unlock(&trf->lock); + return IRQ_HANDLED; +} + +static void trf7970a_issue_eof(struct trf7970a *trf) +{ + int ret; + + dev_dbg(trf->dev, "Issuing EOF\n"); + + ret = trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET); + if (ret) + trf7970a_send_err_upstream(trf, ret); + + ret = trf7970a_cmd(trf, TRF7970A_CMD_EOF); + if (ret) + trf7970a_send_err_upstream(trf, ret); + + trf->state = TRF7970A_ST_WAIT_FOR_RX_DATA; + + dev_dbg(trf->dev, "Setting timeout for %d ms, state: %d\n", + trf->timeout, trf->state); + + schedule_delayed_work(&trf->timeout_work, + msecs_to_jiffies(trf->timeout)); +} + +static void trf7970a_timeout_work_handler(struct work_struct *work) +{ + struct trf7970a *trf = container_of(work, struct trf7970a, + timeout_work.work); + + dev_dbg(trf->dev, "Timeout - state: %d, ignore_timeout: %d\n", + trf->state, trf->ignore_timeout); + + mutex_lock(&trf->lock); + + if (trf->ignore_timeout) + trf->ignore_timeout = false; + else if (trf->state == TRF7970A_ST_WAIT_FOR_RX_DATA_CONT) + trf7970a_drain_fifo(trf, TRF7970A_IRQ_STATUS_SRX); + else if (trf->state == TRF7970A_ST_WAIT_TO_ISSUE_EOF) + trf7970a_issue_eof(trf); + else + trf7970a_send_err_upstream(trf, -ETIMEDOUT); + + mutex_unlock(&trf->lock); +} + +static int trf7970a_init(struct trf7970a *trf) +{ + int ret; + + dev_dbg(trf->dev, "Initializing device - state: %d\n", trf->state); + + ret = trf7970a_cmd(trf, TRF7970A_CMD_SOFT_INIT); + if (ret) + goto err_out; + + ret = trf7970a_cmd(trf, TRF7970A_CMD_IDLE); + if (ret) + goto err_out; + + ret = trf7970a_write(trf, TRF7970A_NFC_TARGET_LEVEL, 0); + if (ret) + goto err_out; + + usleep_range(1000, 2000); + + trf->chip_status_ctrl &= ~TRF7970A_CHIP_STATUS_RF_ON; + + ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL, 0); + if (ret) + goto err_out; + + trf->modulator_sys_clk_ctrl = 0; + + ret = trf7970a_write(trf, TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS, + TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_96 | + TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_32); + if (ret) + goto err_out; + + ret = trf7970a_write(trf, TRF7970A_SPECIAL_FCN_REG1, 0); + if (ret) + goto err_out; + + trf->special_fcn_reg1 = 0; + + trf->iso_ctrl = 0xff; + return 0; + +err_out: + dev_dbg(trf->dev, "Couldn't init device: %d\n", ret); + return ret; +} + +static void trf7970a_switch_rf_off(struct trf7970a *trf) +{ + if ((trf->state == TRF7970A_ST_PWR_OFF) || + (trf->state == TRF7970A_ST_RF_OFF)) + return; + + dev_dbg(trf->dev, "Switching rf off\n"); + + trf->chip_status_ctrl &= ~TRF7970A_CHIP_STATUS_RF_ON; + + trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL, trf->chip_status_ctrl); + + trf->aborting = false; + trf->state = TRF7970A_ST_RF_OFF; + + pm_runtime_mark_last_busy(trf->dev); + pm_runtime_put_autosuspend(trf->dev); +} + +static int trf7970a_switch_rf_on(struct trf7970a *trf) +{ + int ret; + + dev_dbg(trf->dev, "Switching rf on\n"); + + pm_runtime_get_sync(trf->dev); + + if (trf->state != TRF7970A_ST_RF_OFF) { /* Power on, RF off */ + dev_err(trf->dev, "%s - Incorrect state: %d\n", __func__, + trf->state); + return -EINVAL; + } + + ret = trf7970a_init(trf); + if (ret) { + dev_err(trf->dev, "%s - Can't initialize: %d\n", __func__, ret); + return ret; + } + + trf->state = TRF7970A_ST_IDLE; + + return 0; +} + +static int trf7970a_switch_rf(struct nfc_digital_dev *ddev, bool on) +{ + struct trf7970a *trf = nfc_digital_get_drvdata(ddev); + int ret = 0; + + dev_dbg(trf->dev, "Switching RF - state: %d, on: %d\n", trf->state, on); + + mutex_lock(&trf->lock); + + if (on) { + switch (trf->state) { + case TRF7970A_ST_PWR_OFF: + case TRF7970A_ST_RF_OFF: + ret = trf7970a_switch_rf_on(trf); + break; + case TRF7970A_ST_IDLE: + case TRF7970A_ST_IDLE_RX_BLOCKED: + break; + default: + dev_err(trf->dev, "%s - Invalid request: %d %d\n", + __func__, trf->state, on); + trf7970a_switch_rf_off(trf); + ret = -EINVAL; + } + } else { + switch (trf->state) { + case TRF7970A_ST_PWR_OFF: + case TRF7970A_ST_RF_OFF: + break; + default: + dev_err(trf->dev, "%s - Invalid request: %d %d\n", + __func__, trf->state, on); + ret = -EINVAL; + /* FALLTHROUGH */ + case TRF7970A_ST_IDLE: + case TRF7970A_ST_IDLE_RX_BLOCKED: + case TRF7970A_ST_WAIT_FOR_RX_DATA: + case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT: + trf7970a_switch_rf_off(trf); + } + } + + mutex_unlock(&trf->lock); + return ret; +} + +static int trf7970a_in_config_rf_tech(struct trf7970a *trf, int tech) +{ + int ret = 0; + + dev_dbg(trf->dev, "rf technology: %d\n", tech); + + switch (tech) { + case NFC_DIGITAL_RF_TECH_106A: + trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_14443A_106; + trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_DEPTH_OOK; + trf->guard_time = TRF7970A_GUARD_TIME_NFCA; + break; + case NFC_DIGITAL_RF_TECH_106B: + trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_14443B_106; + trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_DEPTH_ASK10; + trf->guard_time = TRF7970A_GUARD_TIME_NFCB; + break; + case NFC_DIGITAL_RF_TECH_212F: + trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_FELICA_212; + trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_DEPTH_ASK10; + trf->guard_time = TRF7970A_GUARD_TIME_NFCF; + break; + case NFC_DIGITAL_RF_TECH_424F: + trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_FELICA_424; + trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_DEPTH_ASK10; + trf->guard_time = TRF7970A_GUARD_TIME_NFCF; + break; + case NFC_DIGITAL_RF_TECH_ISO15693: + trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648; + trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_DEPTH_OOK; + trf->guard_time = TRF7970A_GUARD_TIME_15693; + break; + default: + dev_dbg(trf->dev, "Unsupported rf technology: %d\n", tech); + return -EINVAL; + } + + trf->technology = tech; + + /* If in initiator mode and not changing the RF tech due to a + * PSL sequence (indicated by 'trf->iso_ctrl == 0xff' from + * trf7970a_init()), clear the NFC Target Detection Level register + * due to erratum. + */ + if (trf->iso_ctrl == 0xff) + ret = trf7970a_write(trf, TRF7970A_NFC_TARGET_LEVEL, 0); + + return ret; +} + +static int trf7970a_is_rf_field(struct trf7970a *trf, bool *is_rf_field) +{ + int ret; + u8 rssi; + + ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL, + trf->chip_status_ctrl | TRF7970A_CHIP_STATUS_REC_ON); + if (ret) + return ret; + + ret = trf7970a_cmd(trf, TRF7970A_CMD_TEST_EXT_RF); + if (ret) + return ret; + + usleep_range(50, 60); + + ret = trf7970a_read(trf, TRF7970A_RSSI_OSC_STATUS, &rssi); + if (ret) + return ret; + + ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL, + trf->chip_status_ctrl); + if (ret) + return ret; + + if (rssi & TRF7970A_RSSI_OSC_STATUS_RSSI_MASK) + *is_rf_field = true; + else + *is_rf_field = false; + + return 0; +} + +static int trf7970a_in_config_framing(struct trf7970a *trf, int framing) +{ + u8 iso_ctrl = trf->iso_ctrl_tech; + bool is_rf_field = false; + int ret; + + dev_dbg(trf->dev, "framing: %d\n", framing); + + switch (framing) { + case NFC_DIGITAL_FRAMING_NFCA_SHORT: + case NFC_DIGITAL_FRAMING_NFCA_STANDARD: + trf->tx_cmd = TRF7970A_CMD_TRANSMIT_NO_CRC; + iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N; + break; + case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A: + case NFC_DIGITAL_FRAMING_NFCA_T4T: + case NFC_DIGITAL_FRAMING_NFCB: + case NFC_DIGITAL_FRAMING_NFCB_T4T: + case NFC_DIGITAL_FRAMING_NFCF: + case NFC_DIGITAL_FRAMING_NFCF_T3T: + case NFC_DIGITAL_FRAMING_ISO15693_INVENTORY: + case NFC_DIGITAL_FRAMING_ISO15693_T5T: + case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP: + case NFC_DIGITAL_FRAMING_NFCF_NFC_DEP: + trf->tx_cmd = TRF7970A_CMD_TRANSMIT; + iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N; + break; + case NFC_DIGITAL_FRAMING_NFCA_T2T: + trf->tx_cmd = TRF7970A_CMD_TRANSMIT; + iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N; + break; + default: + dev_dbg(trf->dev, "Unsupported Framing: %d\n", framing); + return -EINVAL; + } + + trf->framing = framing; + + if (!(trf->chip_status_ctrl & TRF7970A_CHIP_STATUS_RF_ON)) { + ret = trf7970a_is_rf_field(trf, &is_rf_field); + if (ret) + return ret; + + if (is_rf_field) + return -EBUSY; + } + + if (iso_ctrl != trf->iso_ctrl) { + ret = trf7970a_write(trf, TRF7970A_ISO_CTRL, iso_ctrl); + if (ret) + return ret; + + trf->iso_ctrl = iso_ctrl; + + ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL, + trf->modulator_sys_clk_ctrl); + if (ret) + return ret; + } + + if (!(trf->chip_status_ctrl & TRF7970A_CHIP_STATUS_RF_ON)) { + ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL, + trf->chip_status_ctrl | + TRF7970A_CHIP_STATUS_RF_ON); + if (ret) + return ret; + + trf->chip_status_ctrl |= TRF7970A_CHIP_STATUS_RF_ON; + + usleep_range(trf->guard_time, trf->guard_time + 1000); + } + + return 0; +} + +static int trf7970a_in_configure_hw(struct nfc_digital_dev *ddev, int type, + int param) +{ + struct trf7970a *trf = nfc_digital_get_drvdata(ddev); + int ret; + + dev_dbg(trf->dev, "Configure hw - type: %d, param: %d\n", type, param); + + mutex_lock(&trf->lock); + + trf->is_initiator = true; + + if ((trf->state == TRF7970A_ST_PWR_OFF) || + (trf->state == TRF7970A_ST_RF_OFF)) { + ret = trf7970a_switch_rf_on(trf); + if (ret) + goto err_unlock; + } + + switch (type) { + case NFC_DIGITAL_CONFIG_RF_TECH: + ret = trf7970a_in_config_rf_tech(trf, param); + break; + case NFC_DIGITAL_CONFIG_FRAMING: + ret = trf7970a_in_config_framing(trf, param); + break; + default: + dev_dbg(trf->dev, "Unknown type: %d\n", type); + ret = -EINVAL; + } + +err_unlock: + mutex_unlock(&trf->lock); + return ret; +} + +static int trf7970a_is_iso15693_write_or_lock(u8 cmd) +{ + switch (cmd) { + case ISO15693_CMD_WRITE_SINGLE_BLOCK: + case ISO15693_CMD_LOCK_BLOCK: + case ISO15693_CMD_WRITE_MULTIPLE_BLOCK: + case ISO15693_CMD_WRITE_AFI: + case ISO15693_CMD_LOCK_AFI: + case ISO15693_CMD_WRITE_DSFID: + case ISO15693_CMD_LOCK_DSFID: + return 1; + break; + default: + return 0; + } +} + +static int trf7970a_per_cmd_config(struct trf7970a *trf, struct sk_buff *skb) +{ + u8 *req = skb->data; + u8 special_fcn_reg1, iso_ctrl; + int ret; + + trf->issue_eof = false; + + /* When issuing Type 2 read command, make sure the '4_bit_RX' bit in + * special functions register 1 is cleared; otherwise, its a write or + * sector select command and '4_bit_RX' must be set. + * + * When issuing an ISO 15693 command, inspect the flags byte to see + * what speed to use. Also, remember if the OPTION flag is set on + * a Type 5 write or lock command so the driver will know that it + * has to send an EOF in order to get a response. + */ + if ((trf->technology == NFC_DIGITAL_RF_TECH_106A) && + (trf->framing == NFC_DIGITAL_FRAMING_NFCA_T2T)) { + if (req[0] == NFC_T2T_CMD_READ) + special_fcn_reg1 = 0; + else + special_fcn_reg1 = TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX; + + if (special_fcn_reg1 != trf->special_fcn_reg1) { + ret = trf7970a_write(trf, TRF7970A_SPECIAL_FCN_REG1, + special_fcn_reg1); + if (ret) + return ret; + + trf->special_fcn_reg1 = special_fcn_reg1; + } + } else if (trf->technology == NFC_DIGITAL_RF_TECH_ISO15693) { + iso_ctrl = trf->iso_ctrl & ~TRF7970A_ISO_CTRL_RFID_SPEED_MASK; + + switch (req[0] & ISO15693_REQ_FLAG_SPEED_MASK) { + case 0x00: + iso_ctrl |= TRF7970A_ISO_CTRL_15693_SGL_1OF4_662; + break; + case ISO15693_REQ_FLAG_SUB_CARRIER: + iso_ctrl |= TRF7970A_ISO_CTRL_15693_DBL_1OF4_667a; + break; + case ISO15693_REQ_FLAG_DATA_RATE: + iso_ctrl |= TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648; + break; + case (ISO15693_REQ_FLAG_SUB_CARRIER | + ISO15693_REQ_FLAG_DATA_RATE): + iso_ctrl |= TRF7970A_ISO_CTRL_15693_DBL_1OF4_2669; + break; + } + + if (iso_ctrl != trf->iso_ctrl) { + ret = trf7970a_write(trf, TRF7970A_ISO_CTRL, iso_ctrl); + if (ret) + return ret; + + trf->iso_ctrl = iso_ctrl; + } + + if (trf->framing == NFC_DIGITAL_FRAMING_ISO15693_T5T) { + if (trf7970a_is_iso15693_write_or_lock(req[1]) && + (req[0] & ISO15693_REQ_FLAG_OPTION)) + trf->issue_eof = true; + else if ((trf->quirks & + TRF7970A_QUIRK_T5T_RMB_EXTRA_BYTE) && + (req[1] == ISO15693_CMD_READ_MULTIPLE_BLOCK)) + trf->adjust_resp_len = true; + } + } + + return 0; +} + +static int trf7970a_send_cmd(struct nfc_digital_dev *ddev, + struct sk_buff *skb, u16 timeout, + nfc_digital_cmd_complete_t cb, void *arg) +{ + struct trf7970a *trf = nfc_digital_get_drvdata(ddev); + u8 prefix[5]; + unsigned int len; + int ret; + u8 status; + + dev_dbg(trf->dev, "New request - state: %d, timeout: %d ms, len: %d\n", + trf->state, timeout, skb->len); + + if (skb->len > TRF7970A_TX_MAX) + return -EINVAL; + + mutex_lock(&trf->lock); + + if ((trf->state != TRF7970A_ST_IDLE) && + (trf->state != TRF7970A_ST_IDLE_RX_BLOCKED)) { + dev_err(trf->dev, "%s - Bogus state: %d\n", __func__, + trf->state); + ret = -EIO; + goto out_err; + } + + if (trf->aborting) { + dev_dbg(trf->dev, "Abort process complete\n"); + trf->aborting = false; + ret = -ECANCELED; + goto out_err; + } + + if (timeout) { + trf->rx_skb = nfc_alloc_recv_skb(TRF7970A_RX_SKB_ALLOC_SIZE, + GFP_KERNEL); + if (!trf->rx_skb) { + dev_dbg(trf->dev, "Can't alloc rx_skb\n"); + ret = -ENOMEM; + goto out_err; + } + } + + if (trf->state == TRF7970A_ST_IDLE_RX_BLOCKED) { + ret = trf7970a_cmd(trf, TRF7970A_CMD_ENABLE_RX); + if (ret) + goto out_err; + + trf->state = TRF7970A_ST_IDLE; + } + + if (trf->is_initiator) { + ret = trf7970a_per_cmd_config(trf, skb); + if (ret) + goto out_err; + } + + trf->ddev = ddev; + trf->tx_skb = skb; + trf->cb = cb; + trf->cb_arg = arg; + trf->timeout = timeout; + trf->ignore_timeout = false; + + len = skb->len; + + /* TX data must be prefixed with a FIFO reset cmd, a cmd that depends + * on what the current framing is, the address of the TX length byte 1 + * register (0x1d), and the 2 byte length of the data to be transmitted. + * That totals 5 bytes. + */ + prefix[0] = TRF7970A_CMD_BIT_CTRL | + TRF7970A_CMD_BIT_OPCODE(TRF7970A_CMD_FIFO_RESET); + prefix[1] = TRF7970A_CMD_BIT_CTRL | + TRF7970A_CMD_BIT_OPCODE(trf->tx_cmd); + prefix[2] = TRF7970A_CMD_BIT_CONTINUOUS | TRF7970A_TX_LENGTH_BYTE1; + + if (trf->framing == NFC_DIGITAL_FRAMING_NFCA_SHORT) { + prefix[3] = 0x00; + prefix[4] = 0x0f; /* 7 bits */ + } else { + prefix[3] = (len & 0xf00) >> 4; + prefix[3] |= ((len & 0xf0) >> 4); + prefix[4] = ((len & 0x0f) << 4); + } + + len = min_t(int, skb->len, TRF7970A_FIFO_SIZE); + + /* Clear possible spurious interrupt */ + ret = trf7970a_read_irqstatus(trf, &status); + if (ret) + goto out_err; + + ret = trf7970a_transmit(trf, skb, len, prefix, sizeof(prefix)); + if (ret) { + kfree_skb(trf->rx_skb); + trf->rx_skb = NULL; + } + +out_err: + mutex_unlock(&trf->lock); + return ret; +} + +static int trf7970a_tg_config_rf_tech(struct trf7970a *trf, int tech) +{ + int ret = 0; + + dev_dbg(trf->dev, "rf technology: %d\n", tech); + + switch (tech) { + case NFC_DIGITAL_RF_TECH_106A: + trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE | + TRF7970A_ISO_CTRL_NFC_CE | + TRF7970A_ISO_CTRL_NFC_CE_14443A; + trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_DEPTH_OOK; + break; + case NFC_DIGITAL_RF_TECH_212F: + trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE | + TRF7970A_ISO_CTRL_NFC_NFCF_212; + trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_DEPTH_ASK10; + break; + case NFC_DIGITAL_RF_TECH_424F: + trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE | + TRF7970A_ISO_CTRL_NFC_NFCF_424; + trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_DEPTH_ASK10; + break; + default: + dev_dbg(trf->dev, "Unsupported rf technology: %d\n", tech); + return -EINVAL; + } + + trf->technology = tech; + + /* Normally we write the ISO_CTRL register in + * trf7970a_tg_config_framing() because the framing can change + * the value written. However, when sending a PSL RES, + * digital_tg_send_psl_res_complete() doesn't call + * trf7970a_tg_config_framing() so we must write the register + * here. + */ + if ((trf->framing == NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED) && + (trf->iso_ctrl_tech != trf->iso_ctrl)) { + ret = trf7970a_write(trf, TRF7970A_ISO_CTRL, + trf->iso_ctrl_tech); + + trf->iso_ctrl = trf->iso_ctrl_tech; + } + + return ret; +} + +/* Since this is a target routine, several of the framing calls are + * made between receiving the request and sending the response so they + * should take effect until after the response is sent. This is accomplished + * by skipping the ISO_CTRL register write here and doing it in the interrupt + * handler. + */ +static int trf7970a_tg_config_framing(struct trf7970a *trf, int framing) +{ + u8 iso_ctrl = trf->iso_ctrl_tech; + int ret; + + dev_dbg(trf->dev, "framing: %d\n", framing); + + switch (framing) { + case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP: + trf->tx_cmd = TRF7970A_CMD_TRANSMIT_NO_CRC; + iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N; + break; + case NFC_DIGITAL_FRAMING_NFCA_STANDARD: + case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A: + case NFC_DIGITAL_FRAMING_NFCA_ANTICOL_COMPLETE: + /* These ones are applied in the interrupt handler */ + iso_ctrl = trf->iso_ctrl; /* Don't write to ISO_CTRL yet */ + break; + case NFC_DIGITAL_FRAMING_NFCF_NFC_DEP: + trf->tx_cmd = TRF7970A_CMD_TRANSMIT; + iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N; + break; + case NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED: + trf->tx_cmd = TRF7970A_CMD_TRANSMIT; + iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N; + break; + default: + dev_dbg(trf->dev, "Unsupported Framing: %d\n", framing); + return -EINVAL; + } + + trf->framing = framing; + + if (iso_ctrl != trf->iso_ctrl) { + ret = trf7970a_write(trf, TRF7970A_ISO_CTRL, iso_ctrl); + if (ret) + return ret; + + trf->iso_ctrl = iso_ctrl; + + ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL, + trf->modulator_sys_clk_ctrl); + if (ret) + return ret; + } + + if (!(trf->chip_status_ctrl & TRF7970A_CHIP_STATUS_RF_ON)) { + ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL, + trf->chip_status_ctrl | + TRF7970A_CHIP_STATUS_RF_ON); + if (ret) + return ret; + + trf->chip_status_ctrl |= TRF7970A_CHIP_STATUS_RF_ON; + } + + return 0; +} + +static int trf7970a_tg_configure_hw(struct nfc_digital_dev *ddev, int type, + int param) +{ + struct trf7970a *trf = nfc_digital_get_drvdata(ddev); + int ret; + + dev_dbg(trf->dev, "Configure hw - type: %d, param: %d\n", type, param); + + mutex_lock(&trf->lock); + + trf->is_initiator = false; + + if ((trf->state == TRF7970A_ST_PWR_OFF) || + (trf->state == TRF7970A_ST_RF_OFF)) { + ret = trf7970a_switch_rf_on(trf); + if (ret) + goto err_unlock; + } + + switch (type) { + case NFC_DIGITAL_CONFIG_RF_TECH: + ret = trf7970a_tg_config_rf_tech(trf, param); + break; + case NFC_DIGITAL_CONFIG_FRAMING: + ret = trf7970a_tg_config_framing(trf, param); + break; + default: + dev_dbg(trf->dev, "Unknown type: %d\n", type); + ret = -EINVAL; + } + +err_unlock: + mutex_unlock(&trf->lock); + return ret; +} + +static int _trf7970a_tg_listen(struct nfc_digital_dev *ddev, u16 timeout, + nfc_digital_cmd_complete_t cb, void *arg, bool mode_detect) +{ + struct trf7970a *trf = nfc_digital_get_drvdata(ddev); + int ret; + + mutex_lock(&trf->lock); + + if ((trf->state != TRF7970A_ST_IDLE) && + (trf->state != TRF7970A_ST_IDLE_RX_BLOCKED)) { + dev_err(trf->dev, "%s - Bogus state: %d\n", __func__, + trf->state); + ret = -EIO; + goto out_err; + } + + if (trf->aborting) { + dev_dbg(trf->dev, "Abort process complete\n"); + trf->aborting = false; + ret = -ECANCELED; + goto out_err; + } + + trf->rx_skb = nfc_alloc_recv_skb(TRF7970A_RX_SKB_ALLOC_SIZE, + GFP_KERNEL); + if (!trf->rx_skb) { + dev_dbg(trf->dev, "Can't alloc rx_skb\n"); + ret = -ENOMEM; + goto out_err; + } + + ret = trf7970a_write(trf, TRF7970A_RX_SPECIAL_SETTINGS, + TRF7970A_RX_SPECIAL_SETTINGS_HBT | + TRF7970A_RX_SPECIAL_SETTINGS_M848 | + TRF7970A_RX_SPECIAL_SETTINGS_C424 | + TRF7970A_RX_SPECIAL_SETTINGS_C212); + if (ret) + goto out_err; + + ret = trf7970a_write(trf, TRF7970A_REG_IO_CTRL, + TRF7970A_REG_IO_CTRL_VRS(0x1)); + if (ret) + goto out_err; + + ret = trf7970a_write(trf, TRF7970A_NFC_LOW_FIELD_LEVEL, + TRF7970A_NFC_LOW_FIELD_LEVEL_RFDET(0x3)); + if (ret) + goto out_err; + + ret = trf7970a_write(trf, TRF7970A_NFC_TARGET_LEVEL, + TRF7970A_NFC_TARGET_LEVEL_RFDET(0x7)); + if (ret) + goto out_err; + + trf->ddev = ddev; + trf->cb = cb; + trf->cb_arg = arg; + trf->timeout = timeout; + trf->ignore_timeout = false; + + ret = trf7970a_cmd(trf, TRF7970A_CMD_ENABLE_RX); + if (ret) + goto out_err; + + trf->state = mode_detect ? TRF7970A_ST_LISTENING_MD : + TRF7970A_ST_LISTENING; + + schedule_delayed_work(&trf->timeout_work, msecs_to_jiffies(timeout)); + +out_err: + mutex_unlock(&trf->lock); + return ret; +} + +static int trf7970a_tg_listen(struct nfc_digital_dev *ddev, u16 timeout, + nfc_digital_cmd_complete_t cb, void *arg) +{ + struct trf7970a *trf = nfc_digital_get_drvdata(ddev); + + dev_dbg(trf->dev, "Listen - state: %d, timeout: %d ms\n", + trf->state, timeout); + + return _trf7970a_tg_listen(ddev, timeout, cb, arg, false); +} + +static int trf7970a_tg_listen_md(struct nfc_digital_dev *ddev, + u16 timeout, nfc_digital_cmd_complete_t cb, void *arg) +{ + struct trf7970a *trf = nfc_digital_get_drvdata(ddev); + int ret; + + dev_dbg(trf->dev, "Listen MD - state: %d, timeout: %d ms\n", + trf->state, timeout); + + ret = trf7970a_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_RF_TECH, + NFC_DIGITAL_RF_TECH_106A); + if (ret) + return ret; + + ret = trf7970a_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_FRAMING, + NFC_DIGITAL_FRAMING_NFCA_NFC_DEP); + if (ret) + return ret; + + return _trf7970a_tg_listen(ddev, timeout, cb, arg, true); +} + +static int trf7970a_tg_get_rf_tech(struct nfc_digital_dev *ddev, u8 *rf_tech) +{ + struct trf7970a *trf = nfc_digital_get_drvdata(ddev); + + dev_dbg(trf->dev, "Get RF Tech - state: %d, rf_tech: %d\n", + trf->state, trf->md_rf_tech); + + *rf_tech = trf->md_rf_tech; + + return 0; +} + +static void trf7970a_abort_cmd(struct nfc_digital_dev *ddev) +{ + struct trf7970a *trf = nfc_digital_get_drvdata(ddev); + + dev_dbg(trf->dev, "Abort process initiated\n"); + + mutex_lock(&trf->lock); + + switch (trf->state) { + case TRF7970A_ST_WAIT_FOR_TX_FIFO: + case TRF7970A_ST_WAIT_FOR_RX_DATA: + case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT: + case TRF7970A_ST_WAIT_TO_ISSUE_EOF: + trf->aborting = true; + break; + case TRF7970A_ST_LISTENING: + trf->ignore_timeout = !cancel_delayed_work(&trf->timeout_work); + trf7970a_send_err_upstream(trf, -ECANCELED); + dev_dbg(trf->dev, "Abort process complete\n"); + break; + default: + break; + } + + mutex_unlock(&trf->lock); +} + +static struct nfc_digital_ops trf7970a_nfc_ops = { + .in_configure_hw = trf7970a_in_configure_hw, + .in_send_cmd = trf7970a_send_cmd, + .tg_configure_hw = trf7970a_tg_configure_hw, + .tg_send_cmd = trf7970a_send_cmd, + .tg_listen = trf7970a_tg_listen, + .tg_listen_md = trf7970a_tg_listen_md, + .tg_get_rf_tech = trf7970a_tg_get_rf_tech, + .switch_rf = trf7970a_switch_rf, + .abort_cmd = trf7970a_abort_cmd, +}; + +static int trf7970a_power_up(struct trf7970a *trf) +{ + int ret; + + dev_dbg(trf->dev, "Powering up - state: %d\n", trf->state); + + if (trf->state != TRF7970A_ST_PWR_OFF) + return 0; + + ret = regulator_enable(trf->regulator); + if (ret) { + dev_err(trf->dev, "%s - Can't enable VIN: %d\n", __func__, ret); + return ret; + } + + usleep_range(5000, 6000); + + if (!(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW)) { + gpio_set_value(trf->en2_gpio, 1); + usleep_range(1000, 2000); + } + + gpio_set_value(trf->en_gpio, 1); + + usleep_range(20000, 21000); + + trf->state = TRF7970A_ST_RF_OFF; + + return 0; +} + +static int trf7970a_power_down(struct trf7970a *trf) +{ + int ret; + + dev_dbg(trf->dev, "Powering down - state: %d\n", trf->state); + + if (trf->state == TRF7970A_ST_PWR_OFF) + return 0; + + if (trf->state != TRF7970A_ST_RF_OFF) { + dev_dbg(trf->dev, "Can't power down - not RF_OFF state (%d)\n", + trf->state); + return -EBUSY; + } + + gpio_set_value(trf->en_gpio, 0); + gpio_set_value(trf->en2_gpio, 0); + + ret = regulator_disable(trf->regulator); + if (ret) + dev_err(trf->dev, "%s - Can't disable VIN: %d\n", __func__, + ret); + + trf->state = TRF7970A_ST_PWR_OFF; + + return ret; +} + +static int trf7970a_startup(struct trf7970a *trf) +{ + int ret; + + ret = trf7970a_power_up(trf); + if (ret) + return ret; + + pm_runtime_set_active(trf->dev); + pm_runtime_enable(trf->dev); + pm_runtime_mark_last_busy(trf->dev); + + return 0; +} + +static void trf7970a_shutdown(struct trf7970a *trf) +{ + switch (trf->state) { + case TRF7970A_ST_WAIT_FOR_TX_FIFO: + case TRF7970A_ST_WAIT_FOR_RX_DATA: + case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT: + case TRF7970A_ST_WAIT_TO_ISSUE_EOF: + case TRF7970A_ST_LISTENING: + trf7970a_send_err_upstream(trf, -ECANCELED); + /* FALLTHROUGH */ + case TRF7970A_ST_IDLE: + case TRF7970A_ST_IDLE_RX_BLOCKED: + trf7970a_switch_rf_off(trf); + break; + default: + break; + } + + pm_runtime_disable(trf->dev); + pm_runtime_set_suspended(trf->dev); + + trf7970a_power_down(trf); +} + +static int trf7970a_get_autosuspend_delay(struct device_node *np) +{ + int autosuspend_delay, ret; + + ret = of_property_read_u32(np, "autosuspend-delay", &autosuspend_delay); + if (ret) + autosuspend_delay = TRF7970A_AUTOSUSPEND_DELAY; + + return autosuspend_delay; +} + +static int trf7970a_get_vin_voltage_override(struct device_node *np, + u32 *vin_uvolts) +{ + return of_property_read_u32(np, "vin-voltage-override", vin_uvolts); +} + +static int trf7970a_probe(struct spi_device *spi) +{ + struct device_node *np = spi->dev.of_node; + struct trf7970a *trf; + int uvolts, autosuspend_delay, ret; + + if (!np) { + dev_err(&spi->dev, "No Device Tree entry\n"); + return -EINVAL; + } + + trf = devm_kzalloc(&spi->dev, sizeof(*trf), GFP_KERNEL); + if (!trf) + return -ENOMEM; + + trf->state = TRF7970A_ST_PWR_OFF; + trf->dev = &spi->dev; + trf->spi = spi; + + spi->mode = SPI_MODE_1; + spi->bits_per_word = 8; + + ret = spi_setup(spi); + if (ret < 0) { + dev_err(trf->dev, "Can't set up SPI Communication\n"); + return ret; + } + + if (of_property_read_bool(np, "t5t-rmb-extra-byte-quirk")) + trf->quirks |= TRF7970A_QUIRK_T5T_RMB_EXTRA_BYTE; + + if (of_property_read_bool(np, "irq-status-read-quirk")) + trf->quirks |= TRF7970A_QUIRK_IRQ_STATUS_READ; + + /* There are two enable pins - both must be present */ + trf->en_gpio = of_get_named_gpio(np, "ti,enable-gpios", 0); + if (!gpio_is_valid(trf->en_gpio)) { + dev_err(trf->dev, "No EN GPIO property\n"); + return trf->en_gpio; + } + + ret = devm_gpio_request_one(trf->dev, trf->en_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "trf7970a EN"); + if (ret) { + dev_err(trf->dev, "Can't request EN GPIO: %d\n", ret); + return ret; + } + + trf->en2_gpio = of_get_named_gpio(np, "ti,enable-gpios", 1); + if (!gpio_is_valid(trf->en2_gpio)) { + dev_err(trf->dev, "No EN2 GPIO property\n"); + return trf->en2_gpio; + } + + ret = devm_gpio_request_one(trf->dev, trf->en2_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "trf7970a EN2"); + if (ret) { + dev_err(trf->dev, "Can't request EN2 GPIO: %d\n", ret); + return ret; + } + + if (of_property_read_bool(np, "en2-rf-quirk")) + trf->quirks |= TRF7970A_QUIRK_EN2_MUST_STAY_LOW; + + ret = devm_request_threaded_irq(trf->dev, spi->irq, NULL, + trf7970a_irq, IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "trf7970a", trf); + if (ret) { + dev_err(trf->dev, "Can't request IRQ#%d: %d\n", spi->irq, ret); + return ret; + } + + mutex_init(&trf->lock); + INIT_DELAYED_WORK(&trf->timeout_work, trf7970a_timeout_work_handler); + + trf->regulator = devm_regulator_get(&spi->dev, "vin"); + if (IS_ERR(trf->regulator)) { + ret = PTR_ERR(trf->regulator); + dev_err(trf->dev, "Can't get VIN regulator: %d\n", ret); + goto err_destroy_lock; + } + + ret = regulator_enable(trf->regulator); + if (ret) { + dev_err(trf->dev, "Can't enable VIN: %d\n", ret); + goto err_destroy_lock; + } + + ret = trf7970a_get_vin_voltage_override(np, &uvolts); + if (ret) + uvolts = regulator_get_voltage(trf->regulator); + + if (uvolts > 4000000) + trf->chip_status_ctrl = TRF7970A_CHIP_STATUS_VRS5_3; + + trf->ddev = nfc_digital_allocate_device(&trf7970a_nfc_ops, + TRF7970A_SUPPORTED_PROTOCOLS, + NFC_DIGITAL_DRV_CAPS_IN_CRC | + NFC_DIGITAL_DRV_CAPS_TG_CRC, 0, 0); + if (!trf->ddev) { + dev_err(trf->dev, "Can't allocate NFC digital device\n"); + ret = -ENOMEM; + goto err_disable_regulator; + } + + nfc_digital_set_parent_dev(trf->ddev, trf->dev); + nfc_digital_set_drvdata(trf->ddev, trf); + spi_set_drvdata(spi, trf); + + autosuspend_delay = trf7970a_get_autosuspend_delay(np); + + pm_runtime_set_autosuspend_delay(trf->dev, autosuspend_delay); + pm_runtime_use_autosuspend(trf->dev); + + ret = trf7970a_startup(trf); + if (ret) + goto err_free_ddev; + + ret = nfc_digital_register_device(trf->ddev); + if (ret) { + dev_err(trf->dev, "Can't register NFC digital device: %d\n", + ret); + goto err_shutdown; + } + + return 0; + +err_shutdown: + trf7970a_shutdown(trf); +err_free_ddev: + nfc_digital_free_device(trf->ddev); +err_disable_regulator: + regulator_disable(trf->regulator); +err_destroy_lock: + mutex_destroy(&trf->lock); + return ret; +} + +static int trf7970a_remove(struct spi_device *spi) +{ + struct trf7970a *trf = spi_get_drvdata(spi); + + mutex_lock(&trf->lock); + + trf7970a_shutdown(trf); + + mutex_unlock(&trf->lock); + + nfc_digital_unregister_device(trf->ddev); + nfc_digital_free_device(trf->ddev); + + regulator_disable(trf->regulator); + + mutex_destroy(&trf->lock); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int trf7970a_suspend(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct trf7970a *trf = spi_get_drvdata(spi); + + dev_dbg(dev, "Suspend\n"); + + mutex_lock(&trf->lock); + + trf7970a_shutdown(trf); + + mutex_unlock(&trf->lock); + + return 0; +} + +static int trf7970a_resume(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct trf7970a *trf = spi_get_drvdata(spi); + int ret; + + dev_dbg(dev, "Resume\n"); + + mutex_lock(&trf->lock); + + ret = trf7970a_startup(trf); + + mutex_unlock(&trf->lock); + + return ret; +} +#endif + +#ifdef CONFIG_PM +static int trf7970a_pm_runtime_suspend(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct trf7970a *trf = spi_get_drvdata(spi); + int ret; + + dev_dbg(dev, "Runtime suspend\n"); + + mutex_lock(&trf->lock); + + ret = trf7970a_power_down(trf); + + mutex_unlock(&trf->lock); + + return ret; +} + +static int trf7970a_pm_runtime_resume(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct trf7970a *trf = spi_get_drvdata(spi); + int ret; + + dev_dbg(dev, "Runtime resume\n"); + + ret = trf7970a_power_up(trf); + if (!ret) + pm_runtime_mark_last_busy(dev); + + return ret; +} +#endif + +static const struct dev_pm_ops trf7970a_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(trf7970a_suspend, trf7970a_resume) + SET_RUNTIME_PM_OPS(trf7970a_pm_runtime_suspend, + trf7970a_pm_runtime_resume, NULL) +}; + +static const struct of_device_id trf7970a_of_match[] = { + { .compatible = "ti,trf7970a", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, trf7970a_of_match); + +static const struct spi_device_id trf7970a_id_table[] = { + { "trf7970a", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, trf7970a_id_table); + +static struct spi_driver trf7970a_spi_driver = { + .probe = trf7970a_probe, + .remove = trf7970a_remove, + .id_table = trf7970a_id_table, + .driver = { + .name = "trf7970a", + .of_match_table = of_match_ptr(trf7970a_of_match), + .pm = &trf7970a_pm_ops, + }, +}; + +module_spi_driver(trf7970a_spi_driver); + +MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TI trf7970a RFID/NFC Transceiver Driver"); |