diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/brcmfmac.h | 185 | ||||
| -rw-r--r-- | include/linux/platform_data/net-cw1200.h | 81 | ||||
| -rw-r--r-- | include/linux/platform_data/nfcmrvl.h | 48 | ||||
| -rw-r--r-- | include/linux/platform_data/nxp-nci.h | 27 | ||||
| -rw-r--r-- | include/linux/platform_data/pn544.h | 43 | ||||
| -rw-r--r-- | include/linux/platform_data/st-nci.h | 31 | ||||
| -rw-r--r-- | include/linux/platform_data/st21nfca.h | 33 |
7 files changed, 448 insertions, 0 deletions
diff --git a/include/linux/platform_data/brcmfmac.h b/include/linux/platform_data/brcmfmac.h new file mode 100644 index 0000000..1d30bf2 --- /dev/null +++ b/include/linux/platform_data/brcmfmac.h @@ -0,0 +1,185 @@ +/* + * Copyright (c) 201 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_BRCMFMAC_PLATFORM_H +#define _LINUX_BRCMFMAC_PLATFORM_H + + +#define BRCMFMAC_PDATA_NAME "brcmfmac" + +#define BRCMFMAC_COUNTRY_BUF_SZ 4 + + +/* + * Platform specific driver functions and data. Through the platform specific + * device data functions and data can be provided to help the brcmfmac driver to + * operate with the device in combination with the used platform. + */ + + +/** + * Note: the brcmfmac can be loaded as module or be statically built-in into + * the kernel. If built-in then do note that it uses module_init (and + * module_exit) routines which equal device_initcall. So if you intend to + * create a module with the platform specific data for the brcmfmac and have + * it built-in to the kernel then use a higher initcall then device_initcall + * (see init.h). If this is not done then brcmfmac will load without problems + * but will not pickup the platform data. + * + * When the driver does not "detect" platform driver data then it will continue + * without reporting anything and just assume there is no data needed. Which is + * probably true for most platforms. + */ + +/** + * enum brcmf_bus_type - Bus type identifier. Currently SDIO, USB and PCIE are + * supported. + */ +enum brcmf_bus_type { + BRCMF_BUSTYPE_SDIO, + BRCMF_BUSTYPE_USB, + BRCMF_BUSTYPE_PCIE +}; + + +/** + * struct brcmfmac_sdio_pd - SDIO Device specific platform data. + * + * @txglomsz: SDIO txglom size. Use 0 if default of driver is to be + * used. + * @drive_strength: is the preferred drive_strength to be used for the SDIO + * pins. If 0 then a default value will be used. This is + * the target drive strength, the exact drive strength + * which will be used depends on the capabilities of the + * device. + * @oob_irq_supported: does the board have support for OOB interrupts. SDIO + * in-band interrupts are relatively slow and for having + * less overhead on interrupt processing an out of band + * interrupt can be used. If the HW supports this then + * enable this by setting this field to true and configure + * the oob related fields. + * @oob_irq_nr, + * @oob_irq_flags: the OOB interrupt information. The values are used for + * registering the irq using request_irq function. + * @broken_sg_support: flag for broken sg list support of SDIO host controller. + * Set this to true if the SDIO host controller has higher + * align requirement than 32 bytes for each scatterlist + * item. + * @sd_head_align: alignment requirement for start of data buffer. + * @sd_sgentry_align: length alignment requirement for each sg entry. + * @reset: This function can get called if the device communication + * broke down. This functionality is particularly useful in + * case of SDIO type devices. It is possible to reset a + * dongle via sdio data interface, but it requires that + * this is fully functional. This function is chip/module + * specific and this function should return only after the + * complete reset has completed. + */ +struct brcmfmac_sdio_pd { + int txglomsz; + unsigned int drive_strength; + bool oob_irq_supported; + unsigned int oob_irq_nr; + unsigned long oob_irq_flags; + bool broken_sg_support; + unsigned short sd_head_align; + unsigned short sd_sgentry_align; + void (*reset)(void); +}; + +/** + * struct brcmfmac_pd_cc_entry - Struct for translating user space country code + * (iso3166) to firmware country code and + * revision. + * + * @iso3166: iso3166 alpha 2 country code string. + * @cc: firmware country code string. + * @rev: firmware country code revision. + */ +struct brcmfmac_pd_cc_entry { + char iso3166[BRCMFMAC_COUNTRY_BUF_SZ]; + char cc[BRCMFMAC_COUNTRY_BUF_SZ]; + s32 rev; +}; + +/** + * struct brcmfmac_pd_cc - Struct for translating country codes as set by user + * space to a country code and rev which can be used by + * firmware. + * + * @table_size: number of entries in table (> 0) + * @table: array of 1 or more elements with translation information. + */ +struct brcmfmac_pd_cc { + int table_size; + struct brcmfmac_pd_cc_entry table[0]; +}; + +/** + * struct brcmfmac_pd_device - Device specific platform data. (id/rev/bus_type) + * is the unique identifier of the device. + * + * @id: ID of the device for which this data is. In case of SDIO + * or PCIE this is the chipid as identified by chip.c In + * case of USB this is the chipid as identified by the + * device query. + * @rev: chip revision, see id. + * @bus_type: The type of bus. Some chipid/rev exist for different bus + * types. Each bus type has its own set of settings. + * @feature_disable: Bitmask of features to disable (override), See feature.c + * in brcmfmac for details. + * @country_codes: If available, pointer to struct for translating country + * codes. + * @bus: Bus specific (union) device settings. Currently only + * SDIO. + */ +struct brcmfmac_pd_device { + unsigned int id; + unsigned int rev; + enum brcmf_bus_type bus_type; + unsigned int feature_disable; + struct brcmfmac_pd_cc *country_codes; + union { + struct brcmfmac_sdio_pd sdio; + } bus; +}; + +/** + * struct brcmfmac_platform_data - BRCMFMAC specific platform data. + * + * @power_on: This function is called by the brcmfmac driver when the module + * gets loaded. This can be particularly useful for low power + * devices. The platform spcific routine may for example decide to + * power up the complete device. If there is no use-case for this + * function then provide NULL. + * @power_off: This function is called by the brcmfmac when the module gets + * unloaded. At this point the devices can be powered down or + * otherwise be reset. So if an actual power_off is not supported + * but reset is supported by the devices then reset the devices + * when this function gets called. This can be particularly useful + * for low power devices. If there is no use-case for this + * function then provide NULL. + */ +struct brcmfmac_platform_data { + void (*power_on)(void); + void (*power_off)(void); + char *fw_alternative_path; + int device_count; + struct brcmfmac_pd_device devices[0]; +}; + + +#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ diff --git a/include/linux/platform_data/net-cw1200.h b/include/linux/platform_data/net-cw1200.h new file mode 100644 index 0000000..c6fbc3c --- /dev/null +++ b/include/linux/platform_data/net-cw1200.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef CW1200_PLAT_H_INCLUDED +#define CW1200_PLAT_H_INCLUDED + +struct cw1200_platform_data_spi { + u8 spi_bits_per_word; /* REQUIRED */ + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + +struct cw1200_platform_data_sdio { + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int irq; /* IRQ line or 0 to use SDIO IRQ */ + int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + + +/* An example of SPI support in your board setup file: + + static struct cw1200_platform_data_spi cw1200_platform_data = { + .ref_clk = 38400, + .spi_bits_per_word = 16, + .reset = GPIO_RF_RESET, + .powerup = GPIO_RF_POWERUP, + .macaddr = wifi_mac_addr, + .sdd_file = "sdd_sagrad_1091_1098.bin", + }; + static struct spi_board_info myboard_spi_devices[] __initdata = { + { + .modalias = "cw1200_wlan_spi", + .max_speed_hz = 52000000, + .bus_num = 0, + .irq = WIFI_IRQ, + .platform_data = &cw1200_platform_data, + .chip_select = 0, + }, + }; + + */ + +/* An example of SDIO support in your board setup file: + + static struct cw1200_platform_data_sdio my_cw1200_platform_data = { + .ref_clk = 38400, + .have_5ghz = false, + .sdd_file = "sdd_myplatform.bin", + }; + cw1200_sdio_set_platform_data(&my_cw1200_platform_data); + + */ + +void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); + +#endif /* CW1200_PLAT_H_INCLUDED */ diff --git a/include/linux/platform_data/nfcmrvl.h b/include/linux/platform_data/nfcmrvl.h new file mode 100644 index 0000000..a6f9d63 --- /dev/null +++ b/include/linux/platform_data/nfcmrvl.h @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2015, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available on the worldwide web at + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _NFCMRVL_PTF_H_ +#define _NFCMRVL_PTF_H_ + +struct nfcmrvl_platform_data { + /* + * Generic + */ + + /* GPIO that is wired to RESET_N signal */ + unsigned int reset_n_io; + /* Tell if transport is muxed in HCI one */ + unsigned int hci_muxed; + + /* + * UART specific + */ + + /* Tell if UART needs flow control at init */ + unsigned int flow_control; + /* Tell if firmware supports break control for power management */ + unsigned int break_control; + + + /* + * I2C specific + */ + + unsigned int irq; + unsigned int irq_polarity; +}; + +#endif /* _NFCMRVL_PTF_H_ */ diff --git a/include/linux/platform_data/nxp-nci.h b/include/linux/platform_data/nxp-nci.h new file mode 100644 index 0000000..d6ed286 --- /dev/null +++ b/include/linux/platform_data/nxp-nci.h @@ -0,0 +1,27 @@ +/* + * Generic platform data for the NXP NCI NFC chips. + * + * Copyright (C) 2014 NXP Semiconductors All rights reserved. + * + * Authors: Clément Perrochaud <clement.perrochaud@nxp.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _NXP_NCI_H_ +#define _NXP_NCI_H_ + +struct nxp_nci_nfc_platform_data { + unsigned int gpio_en; + unsigned int gpio_fw; + unsigned int irq; +}; + +#endif /* _NXP_NCI_H_ */ diff --git a/include/linux/platform_data/pn544.h b/include/linux/platform_data/pn544.h new file mode 100644 index 0000000..5ce1ab9 --- /dev/null +++ b/include/linux/platform_data/pn544.h @@ -0,0 +1,43 @@ +/* + * Driver include for the PN544 NFC chip. + * + * Copyright (C) Nokia Corporation + * + * Author: Jari Vanhala <ext-jari.vanhala@nokia.com> + * Contact: Matti Aaltoenn <matti.j.aaltonen@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _PN544_H_ +#define _PN544_H_ + +#include <linux/i2c.h> + +enum { + NFC_GPIO_ENABLE, + NFC_GPIO_FW_RESET, + NFC_GPIO_IRQ +}; + +/* board config */ +struct pn544_nfc_platform_data { + int (*request_resources) (struct i2c_client *client); + void (*free_resources) (void); + void (*enable) (int fw); + int (*test) (void); + void (*disable) (void); + int (*get_gpio)(int type); +}; + +#endif /* _PN544_H_ */ diff --git a/include/linux/platform_data/st-nci.h b/include/linux/platform_data/st-nci.h new file mode 100644 index 0000000..f6494b3 --- /dev/null +++ b/include/linux/platform_data/st-nci.h @@ -0,0 +1,31 @@ +/* + * Driver include for ST NCI NFC chip family. + * + * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _ST_NCI_H_ +#define _ST_NCI_H_ + +#define ST_NCI_DRIVER_NAME "st_nci" + +struct st_nci_nfc_platform_data { + unsigned int gpio_reset; + unsigned int irq_polarity; + bool is_ese_present; + bool is_uicc_present; +}; + +#endif /* _ST_NCI_H_ */ diff --git a/include/linux/platform_data/st21nfca.h b/include/linux/platform_data/st21nfca.h new file mode 100644 index 0000000..cc2bdaf --- /dev/null +++ b/include/linux/platform_data/st21nfca.h @@ -0,0 +1,33 @@ +/* + * Driver include for the ST21NFCA NFC chip. + * + * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _ST21NFCA_HCI_H_ +#define _ST21NFCA_HCI_H_ + +#include <linux/i2c.h> + +#define ST21NFCA_HCI_DRIVER_NAME "st21nfca_hci" + +struct st21nfca_nfc_platform_data { + unsigned int gpio_ena; + unsigned int irq_polarity; + bool is_ese_present; + bool is_uicc_present; +}; + +#endif /* _ST21NFCA_HCI_H_ */ |