From 52409fae3e4b8d16b68b61902fc09075cd97b75d Mon Sep 17 00:00:00 2001 From: Dominik Sliwa Date: Sun, 2 Jul 2017 16:41:37 +0200 Subject: Backports generated from 4.11 kernel Initial commit. Signed-off-by: Dominik Sliwa --- drivers/net/wireless/intel/iwlwifi/iwl-fh.h | 749 ++++++++++++++++++++++++++++ 1 file changed, 749 insertions(+) create mode 100644 drivers/net/wireless/intel/iwlwifi/iwl-fh.h (limited to 'drivers/net/wireless/intel/iwlwifi/iwl-fh.h') diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-fh.h b/drivers/net/wireless/intel/iwlwifi/iwl-fh.h new file mode 100644 index 0000000..33ef537 --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/iwl-fh.h @@ -0,0 +1,749 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2015 - 2016 Intel Deutschland GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2015 - 2016 Intel Deutschland GmbH + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#ifndef __iwl_fh_h__ +#define __iwl_fh_h__ + +#include + +/****************************/ +/* Flow Handler Definitions */ +/****************************/ + +/** + * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) + * Addresses are offsets from device's PCI hardware base address. + */ +#define FH_MEM_LOWER_BOUND (0x1000) +#define FH_MEM_UPPER_BOUND (0x2000) + +/** + * Keep-Warm (KW) buffer base address. + * + * Driver must allocate a 4KByte buffer that is for keeping the + * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency + * DRAM access when doing Txing or Rxing. The dummy accesses prevent host + * from going into a power-savings mode that would cause higher DRAM latency, + * and possible data over/under-runs, before all Tx/Rx is complete. + * + * Driver loads FH_KW_MEM_ADDR_REG with the physical address (bits 35:4) + * of the buffer, which must be 4K aligned. Once this is set up, the device + * automatically invokes keep-warm accesses when normal accesses might not + * be sufficient to maintain fast DRAM response. + * + * Bit fields: + * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned + */ +#define FH_KW_MEM_ADDR_REG (FH_MEM_LOWER_BOUND + 0x97C) + + +/** + * TFD Circular Buffers Base (CBBC) addresses + * + * Device has 16 base pointer registers, one for each of 16 host-DRAM-resident + * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs) + * (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04 + * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte + * aligned (address bits 0-7 must be 0). + * Later devices have 20 (5000 series) or 30 (higher) queues, but the registers + * for them are in different places. + * + * Bit fields in each pointer register: + * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned + */ +#define FH_MEM_CBBC_0_15_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) +#define FH_MEM_CBBC_0_15_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) +#define FH_MEM_CBBC_16_19_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBF0) +#define FH_MEM_CBBC_16_19_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_CBBC_20_31_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xB20) +#define FH_MEM_CBBC_20_31_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xB80) +/* a000 TFD table address, 64 bit */ +#define TFH_TFDQ_CBB_TABLE (0x1C00) + +/* Find TFD CB base pointer for given queue */ +static inline unsigned int FH_MEM_CBBC_QUEUE(struct iwl_trans *trans, + unsigned int chnl) +{ + if (trans->cfg->use_tfh) { + WARN_ON_ONCE(chnl >= 64); + return TFH_TFDQ_CBB_TABLE + 8 * chnl; + } + if (chnl < 16) + return FH_MEM_CBBC_0_15_LOWER_BOUND + 4 * chnl; + if (chnl < 20) + return FH_MEM_CBBC_16_19_LOWER_BOUND + 4 * (chnl - 16); + WARN_ON_ONCE(chnl >= 32); + return FH_MEM_CBBC_20_31_LOWER_BOUND + 4 * (chnl - 20); +} + +/* a000 configuration registers */ + +/* + * TFH Configuration register. + * + * BIT fields: + * + * Bits 3:0: + * Define the maximum number of pending read requests. + * Maximum configration value allowed is 0xC + * Bits 9:8: + * Define the maximum transfer size. (64 / 128 / 256) + * Bit 10: + * When bit is set and transfer size is set to 128B, the TFH will enable + * reading chunks of more than 64B only if the read address is aligned to 128B. + * In case of DRAM read address which is not aligned to 128B, the TFH will + * enable transfer size which doesn't cross 64B DRAM address boundary. +*/ +#define TFH_TRANSFER_MODE (0x1F40) +#define TFH_TRANSFER_MAX_PENDING_REQ 0xc +#define TFH_CHUNK_SIZE_128 BIT(8) +#define TFH_CHUNK_SPLIT_MODE BIT(10) +/* + * Defines the offset address in dwords referring from the beginning of the + * Tx CMD which will be updated in DRAM. + * Note that the TFH offset address for Tx CMD update is always referring to + * the start of the TFD first TB. + * In case of a DRAM Tx CMD update the TFH will update PN and Key ID + */ +#define TFH_TXCMD_UPDATE_CFG (0x1F48) +/* + * Controls TX DMA operation + * + * BIT fields: + * + * Bits 31:30: Enable the SRAM DMA channel. + * Turning on bit 31 will kick the SRAM2DRAM DMA. + * Note that the sram2dram may be enabled only after configuring the DRAM and + * SRAM addresses registers and the byte count register. + * Bits 25:24: Defines the interrupt target upon dram2sram transfer done. When + * set to 1 - interrupt is sent to the driver + * Bit 0: Indicates the snoop configuration +*/ +#define TFH_SRV_DMA_CHNL0_CTRL (0x1F60) +#define TFH_SRV_DMA_SNOOP BIT(0) +#define TFH_SRV_DMA_TO_DRIVER BIT(24) +#define TFH_SRV_DMA_START BIT(31) + +/* Defines the DMA SRAM write start address to transfer a data block */ +#define TFH_SRV_DMA_CHNL0_SRAM_ADDR (0x1F64) + +/* Defines the 64bits DRAM start address to read the DMA data block from */ +#define TFH_SRV_DMA_CHNL0_DRAM_ADDR (0x1F68) + +/* + * Defines the number of bytes to transfer from DRAM to SRAM. + * Note that this register may be configured with non-dword aligned size. + */ +#define TFH_SRV_DMA_CHNL0_BC (0x1F70) + +/** + * Rx SRAM Control and Status Registers (RSCSR) + * + * These registers provide handshake between driver and device for the Rx queue + * (this queue handles *all* command responses, notifications, Rx data, etc. + * sent from uCode to host driver). Unlike Tx, there is only one Rx + * queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can + * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer + * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1 + * mapping between RBDs and RBs. + * + * Driver must allocate host DRAM memory for the following, and set the + * physical address of each into device registers: + * + * 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256 + * entries (although any power of 2, up to 4096, is selectable by driver). + * Each entry (1 dword) points to a receive buffer (RB) of consistent size + * (typically 4K, although 8K or 16K are also selectable by driver). + * Driver sets up RB size and number of RBDs in the CB via Rx config + * register FH_MEM_RCSR_CHNL0_CONFIG_REG. + * + * Bit fields within one RBD: + * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned + * + * Driver sets physical address [35:8] of base of RBD circular buffer + * into FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. + * + * 2) Rx status buffer, 8 bytes, in which uCode indicates which Rx Buffers + * (RBs) have been filled, via a "write pointer", actually the index of + * the RB's corresponding RBD within the circular buffer. Driver sets + * physical address [35:4] into FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. + * + * Bit fields in lower dword of Rx status buffer (upper dword not used + * by driver: + * 31-12: Not used by driver + * 11- 0: Index of last filled Rx buffer descriptor + * (device writes, driver reads this value) + * + * As the driver prepares Receive Buffers (RBs) for device to fill, driver must + * enter pointers to these RBs into contiguous RBD circular buffer entries, + * and update the device's "write" index register, + * FH_RSCSR_CHNL0_RBDCB_WPTR_REG. + * + * This "write" index corresponds to the *next* RBD that the driver will make + * available, i.e. one RBD past the tail of the ready-to-fill RBDs within + * the circular buffer. This value should initially be 0 (before preparing any + * RBs), should be 8 after preparing the first 8 RBs (for example), and must + * wrap back to 0 at the end of the circular buffer (but don't wrap before + * "read" index has advanced past 1! See below). + * NOTE: DEVICE EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8. + * + * As the device fills RBs (referenced from contiguous RBDs within the circular + * buffer), it updates the Rx status buffer in host DRAM, 2) described above, + * to tell the driver the index of the latest filled RBD. The driver must + * read this "read" index from DRAM after receiving an Rx interrupt from device + * + * The driver must also internally keep track of a third index, which is the + * next RBD to process. When receiving an Rx interrupt, driver should process + * all filled but unprocessed RBs up to, but not including, the RB + * corresponding to the "read" index. For example, if "read" index becomes "1", + * driver may process the RB pointed to by RBD 0. Depending on volume of + * traffic, there may be many RBs to process. + * + * If read index == write index, device thinks there is no room to put new data. + * Due to this, the maximum number of filled RBs is 255, instead of 256. To + * be safe, make sure that there is a gap of at least 2 RBDs between "write" + * and "read" indexes; that is, make sure that there are no more than 254 + * buffers waiting to be filled. + */ +#define FH_MEM_RSCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBC0) +#define FH_MEM_RSCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_RSCSR_CHNL0 (FH_MEM_RSCSR_LOWER_BOUND) + +/** + * Physical base address of 8-byte Rx Status buffer. + * Bit fields: + * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned. + */ +#define FH_RSCSR_CHNL0_STTS_WPTR_REG (FH_MEM_RSCSR_CHNL0) + +/** + * Physical base address of Rx Buffer Descriptor Circular Buffer. + * Bit fields: + * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned. + */ +#define FH_RSCSR_CHNL0_RBDCB_BASE_REG (FH_MEM_RSCSR_CHNL0 + 0x004) + +/** + * Rx write pointer (index, really!). + * Bit fields: + * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1. + * NOTE: For 256-entry circular buffer, use only bits [7:0]. + */ +#define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008) +#define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG) + +#define FW_RSCSR_CHNL0_RXDCB_RDPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x00c) +#define FH_RSCSR_CHNL0_RDPTR FW_RSCSR_CHNL0_RXDCB_RDPTR_REG + +/** + * Rx Config/Status Registers (RCSR) + * Rx Config Reg for channel 0 (only channel used) + * + * Driver must initialize FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for + * normal operation (see bit fields). + * + * Clearing FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. + * Driver should poll FH_MEM_RSSR_RX_STATUS_REG for + * FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. + * + * Bit fields: + * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame, + * '10' operate normally + * 29-24: reserved + * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal), + * min "5" for 32 RBDs, max "12" for 4096 RBDs. + * 19-18: reserved + * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K, + * '10' 12K, '11' 16K. + * 15-14: reserved + * 13-12: IRQ destination; '00' none, '01' host driver (normal operation) + * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec) + * typical value 0x10 (about 1/2 msec) + * 3- 0: reserved + */ +#define FH_MEM_RCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_RCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xCC0) +#define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND) + +#define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0) +#define FH_MEM_RCSR_CHNL0_RBDCB_WPTR (FH_MEM_RCSR_CHNL0 + 0x8) +#define FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ (FH_MEM_RCSR_CHNL0 + 0x10) + +#define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */ +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */ +#define FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */ +#define FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */ +#define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */ +#define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/ + +#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20) +#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4) +#define RX_RB_TIMEOUT (0x11) + +#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) +#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) +#define FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) + +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) + +#define FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004) +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) + +/** + * Rx Shared Status Registers (RSSR) + * + * After stopping Rx DMA channel (writing 0 to + * FH_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll + * FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. + * + * Bit fields: + * 24: 1 = Channel 0 is idle + * + * FH_MEM_RSSR_SHARED_CTRL_REG and FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV + * contain default values that should not be altered by the driver. + */ +#define FH_MEM_RSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC40) +#define FH_MEM_RSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) + +#define FH_MEM_RSSR_SHARED_CTRL_REG (FH_MEM_RSSR_LOWER_BOUND) +#define FH_MEM_RSSR_RX_STATUS_REG (FH_MEM_RSSR_LOWER_BOUND + 0x004) +#define FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\ + (FH_MEM_RSSR_LOWER_BOUND + 0x008) + +#define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) + +#define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 +#define FH_MEM_TB_MAX_LENGTH (0x00020000) + +/* 9000 rx series registers */ + +#define RFH_Q0_FRBDCB_BA_LSB 0xA08000 /* 64 bit address */ +#define RFH_Q_FRBDCB_BA_LSB(q) (RFH_Q0_FRBDCB_BA_LSB + (q) * 8) +/* Write index table */ +#define RFH_Q0_FRBDCB_WIDX 0xA08080 +#define RFH_Q_FRBDCB_WIDX(q) (RFH_Q0_FRBDCB_WIDX + (q) * 4) +/* Write index table - shadow registers */ +#define RFH_Q0_FRBDCB_WIDX_TRG 0x1C80 +#define RFH_Q_FRBDCB_WIDX_TRG(q) (RFH_Q0_FRBDCB_WIDX_TRG + (q) * 4) +/* Read index table */ +#define RFH_Q0_FRBDCB_RIDX 0xA080C0 +#define RFH_Q_FRBDCB_RIDX(q) (RFH_Q0_FRBDCB_RIDX + (q) * 4) +/* Used list table */ +#define RFH_Q0_URBDCB_BA_LSB 0xA08100 /* 64 bit address */ +#define RFH_Q_URBDCB_BA_LSB(q) (RFH_Q0_URBDCB_BA_LSB + (q) * 8) +/* Write index table */ +#define RFH_Q0_URBDCB_WIDX 0xA08180 +#define RFH_Q_URBDCB_WIDX(q) (RFH_Q0_URBDCB_WIDX + (q) * 4) +#define RFH_Q0_URBDCB_VAID 0xA081C0 +#define RFH_Q_URBDCB_VAID(q) (RFH_Q0_URBDCB_VAID + (q) * 4) +/* stts */ +#define RFH_Q0_URBD_STTS_WPTR_LSB 0xA08200 /*64 bits address */ +#define RFH_Q_URBD_STTS_WPTR_LSB(q) (RFH_Q0_URBD_STTS_WPTR_LSB + (q) * 8) + +#define RFH_Q0_ORB_WPTR_LSB 0xA08280 +#define RFH_Q_ORB_WPTR_LSB(q) (RFH_Q0_ORB_WPTR_LSB + (q) * 8) +#define RFH_RBDBUF_RBD0_LSB 0xA08300 +#define RFH_RBDBUF_RBD_LSB(q) (RFH_RBDBUF_RBD0_LSB + (q) * 8) + +/** + * RFH Status Register + * + * Bit fields: + * + * Bit 29: RBD_FETCH_IDLE + * This status flag is set by the RFH when there is no active RBD fetch from + * DRAM. + * Once the RFH RBD controller starts fetching (or when there is a pending + * RBD read response from DRAM), this flag is immediately turned off. + * + * Bit 30: SRAM_DMA_IDLE + * This status flag is set by the RFH when there is no active transaction from + * SRAM to DRAM. + * Once the SRAM to DRAM DMA is active, this flag is immediately turned off. + * + * Bit 31: RXF_DMA_IDLE + * This status flag is set by the RFH when there is no active transaction from + * RXF to DRAM. + * Once the RXF-to-DRAM DMA is active, this flag is immediately turned off. + */ +#define RFH_GEN_STATUS 0xA09808 +#define RBD_FETCH_IDLE BIT(29) +#define SRAM_DMA_IDLE BIT(30) +#define RXF_DMA_IDLE BIT(31) + +/* DMA configuration */ +#define RFH_RXF_DMA_CFG 0xA09820 +/* RB size */ +#define RFH_RXF_DMA_RB_SIZE_MASK (0x000F0000) /* bits 16-19 */ +#define RFH_RXF_DMA_RB_SIZE_POS 16 +#define RFH_RXF_DMA_RB_SIZE_1K (0x1 << RFH_RXF_DMA_RB_SIZE_POS) +#define RFH_RXF_DMA_RB_SIZE_2K (0x2 << RFH_RXF_DMA_RB_SIZE_POS) +#define RFH_RXF_DMA_RB_SIZE_4K (0x4 << RFH_RXF_DMA_RB_SIZE_POS) +#define RFH_RXF_DMA_RB_SIZE_8K (0x8 << RFH_RXF_DMA_RB_SIZE_POS) +#define RFH_RXF_DMA_RB_SIZE_12K (0x9 << RFH_RXF_DMA_RB_SIZE_POS) +#define RFH_RXF_DMA_RB_SIZE_16K (0xA << RFH_RXF_DMA_RB_SIZE_POS) +#define RFH_RXF_DMA_RB_SIZE_20K (0xB << RFH_RXF_DMA_RB_SIZE_POS) +#define RFH_RXF_DMA_RB_SIZE_24K (0xC << RFH_RXF_DMA_RB_SIZE_POS) +#define RFH_RXF_DMA_RB_SIZE_28K (0xD << RFH_RXF_DMA_RB_SIZE_POS) +#define RFH_RXF_DMA_RB_SIZE_32K (0xE << RFH_RXF_DMA_RB_SIZE_POS) +/* RB Circular Buffer size:defines the table sizes in RBD units */ +#define RFH_RXF_DMA_RBDCB_SIZE_MASK (0x00F00000) /* bits 20-23 */ +#define RFH_RXF_DMA_RBDCB_SIZE_POS 20 +#define RFH_RXF_DMA_RBDCB_SIZE_8 (0x3 << RFH_RXF_DMA_RBDCB_SIZE_POS) +#define RFH_RXF_DMA_RBDCB_SIZE_16 (0x4 << RFH_RXF_DMA_RBDCB_SIZE_POS) +#define RFH_RXF_DMA_RBDCB_SIZE_32 (0x5 << RFH_RXF_DMA_RBDCB_SIZE_POS) +#define RFH_RXF_DMA_RBDCB_SIZE_64 (0x7 << RFH_RXF_DMA_RBDCB_SIZE_POS) +#define RFH_RXF_DMA_RBDCB_SIZE_128 (0x7 << RFH_RXF_DMA_RBDCB_SIZE_POS) +#define RFH_RXF_DMA_RBDCB_SIZE_256 (0x8 << RFH_RXF_DMA_RBDCB_SIZE_POS) +#define RFH_RXF_DMA_RBDCB_SIZE_512 (0x9 << RFH_RXF_DMA_RBDCB_SIZE_POS) +#define RFH_RXF_DMA_RBDCB_SIZE_1024 (0xA << RFH_RXF_DMA_RBDCB_SIZE_POS) +#define RFH_RXF_DMA_RBDCB_SIZE_2048 (0xB << RFH_RXF_DMA_RBDCB_SIZE_POS) +#define RFH_RXF_DMA_MIN_RB_SIZE_MASK (0x03000000) /* bit 24-25 */ +#define RFH_RXF_DMA_MIN_RB_SIZE_POS 24 +#define RFH_RXF_DMA_MIN_RB_4_8 (3 << RFH_RXF_DMA_MIN_RB_SIZE_POS) +#define RFH_RXF_DMA_DROP_TOO_LARGE_MASK (0x04000000) /* bit 26 */ +#define RFH_RXF_DMA_SINGLE_FRAME_MASK (0x20000000) /* bit 29 */ +#define RFH_DMA_EN_MASK (0xC0000000) /* bits 30-31*/ +#define RFH_DMA_EN_ENABLE_VAL BIT(31) + +#define RFH_RXF_RXQ_ACTIVE 0xA0980C + +#define RFH_GEN_CFG 0xA09800 +#define RFH_GEN_CFG_SERVICE_DMA_SNOOP BIT(0) +#define RFH_GEN_CFG_RFH_DMA_SNOOP BIT(1) +#define RFH_GEN_CFG_RB_CHUNK_SIZE_POS 4 +#define RFH_GEN_CFG_RB_CHUNK_SIZE_128 1 +#define RFH_GEN_CFG_RB_CHUNK_SIZE_64 0 +#define RFH_GEN_CFG_DEFAULT_RXQ_NUM_MASK 0xF00 +#define RFH_GEN_CFG_DEFAULT_RXQ_NUM_POS 8 + +#define DEFAULT_RXQ_NUM 0 + +/* end of 9000 rx series registers */ + +/* TFDB Area - TFDs buffer table */ +#define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) +#define FH_TFDIB_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x900) +#define FH_TFDIB_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x958) +#define FH_TFDIB_CTRL0_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl)) +#define FH_TFDIB_CTRL1_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4) + +/** + * Transmit DMA Channel Control/Status Registers (TCSR) + * + * Device has one configuration register for each of 8 Tx DMA/FIFO channels + * supported in hardware (don't confuse these with the 16 Tx queues in DRAM, + * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes. + * + * To use a Tx DMA channel, driver must initialize its + * FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with: + * + * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | + * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL + * + * All other bits should be 0. + * + * Bit fields: + * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame, + * '10' operate normally + * 29- 4: Reserved, set to "0" + * 3: Enable internal DMA requests (1, normal operation), disable (0) + * 2- 0: Reserved, set to "0" + */ +#define FH_TCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) +#define FH_TCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xE60) + +/* Find Control/Status reg for given Tx DMA/FIFO channel */ +#define FH_TCSR_CHNL_NUM (8) + +/* TCSR: tx_config register values */ +#define FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl)) +#define FH_TCSR_CHNL_TX_CREDIT_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4) +#define FH_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8) + +#define FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV (0x00000001) + +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE (0x00000008) + +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000) +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000) + +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD (0x00400000) +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD (0x00800000) + +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) + +#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000) +#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000) +#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003) + +#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20) +#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12) + +/** + * Tx Shared Status Registers (TSSR) + * + * After stopping Tx DMA channel (writing 0 to + * FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll + * FH_TSSR_TX_STATUS_REG until selected Tx channel is idle + * (channel's buffers empty | no pending requests). + * + * Bit fields: + * 31-24: 1 = Channel buffers empty (channel 7:0) + * 23-16: 1 = No pending requests (channel 7:0) + */ +#define FH_TSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xEA0) +#define FH_TSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xEC0) + +#define FH_TSSR_TX_STATUS_REG (FH_TSSR_LOWER_BOUND + 0x010) + +/** + * Bit fields for TSSR(Tx Shared Status & Control) error status register: + * 31: Indicates an address error when accessed to internal memory + * uCode/driver must write "1" in order to clear this flag + * 30: Indicates that Host did not send the expected number of dwords to FH + * uCode/driver must write "1" in order to clear this flag + * 16-9:Each status bit is for one channel. Indicates that an (Error) ActDMA + * command was received from the scheduler while the TRB was already full + * with previous command + * uCode/driver must write "1" in order to clear this flag + * 7-0: Each status bit indicates a channel's TxCredit error. When an error + * bit is set, it indicates that the FH has received a full indication + * from the RTC TxFIFO and the current value of the TxCredit counter was + * not equal to zero. This mean that the credit mechanism was not + * synchronized to the TxFIFO status + * uCode/driver must write "1" in order to clear this flag + */ +#define FH_TSSR_TX_ERROR_REG (FH_TSSR_LOWER_BOUND + 0x018) +#define FH_TSSR_TX_MSG_CONFIG_REG (FH_TSSR_LOWER_BOUND + 0x008) + +#define FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16) + +/* Tx service channels */ +#define FH_SRVC_CHNL (9) +#define FH_SRVC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9C8) +#define FH_SRVC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) +#define FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \ + (FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4) + +#define FH_TX_CHICKEN_BITS_REG (FH_MEM_LOWER_BOUND + 0xE98) +#define FH_TX_TRB_REG(_chan) (FH_MEM_LOWER_BOUND + 0x958 + (_chan) * 4) + +/* Instruct FH to increment the retry count of a packet when + * it is brought from the memory to TX-FIFO + */ +#define FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002) + +#define MQ_RX_TABLE_SIZE 512 +#define MQ_RX_TABLE_MASK (MQ_RX_TABLE_SIZE - 1) +#define MQ_RX_NUM_RBDS (MQ_RX_TABLE_SIZE - 1) +#define RX_POOL_SIZE (MQ_RX_NUM_RBDS + \ + IWL_MAX_RX_HW_QUEUES * \ + (RX_CLAIM_REQ_ALLOC - RX_POST_REQ_ALLOC)) + +#define RX_QUEUE_SIZE 256 +#define RX_QUEUE_MASK 255 +#define RX_QUEUE_SIZE_LOG 8 + +/** + * struct iwl_rb_status - reserve buffer status + * host memory mapped FH registers + * @closed_rb_num [0:11] - Indicates the index of the RB which was closed + * @closed_fr_num [0:11] - Indicates the index of the RX Frame which was closed + * @finished_rb_num [0:11] - Indicates the index of the current RB + * in which the last frame was written to + * @finished_fr_num [0:11] - Indicates the index of the RX Frame + * which was transferred + */ +struct iwl_rb_status { + __le16 closed_rb_num; + __le16 closed_fr_num; + __le16 finished_rb_num; + __le16 finished_fr_nam; + __le32 __unused; +} __packed; + + +#define TFD_QUEUE_SIZE_MAX (256) +#define TFD_QUEUE_SIZE_BC_DUP (64) +#define TFD_QUEUE_BC_SIZE (TFD_QUEUE_SIZE_MAX + TFD_QUEUE_SIZE_BC_DUP) +#define IWL_TX_DMA_MASK DMA_BIT_MASK(36) +#define IWL_NUM_OF_TBS 20 +#define IWL_TFH_NUM_TBS 25 + +static inline u8 iwl_get_dma_hi_addr(dma_addr_t addr) +{ + return (sizeof(addr) > sizeof(u32) ? (addr >> 16) >> 16 : 0) & 0xF; +} +/** + * struct iwl_tfd_tb transmit buffer descriptor within transmit frame descriptor + * + * This structure contains dma address and length of transmission address + * + * @lo: low [31:0] portion of the dma address of TX buffer + * every even is unaligned on 16 bit boundary + * @hi_n_len 0-3 [35:32] portion of dma + * 4-15 length of the tx buffer + */ +struct iwl_tfd_tb { + __le32 lo; + __le16 hi_n_len; +} __packed; + +/** + * struct iwl_tfh_tb transmit buffer descriptor within transmit frame descriptor + * + * This structure contains dma address and length of transmission address + * + * @tb_len length of the tx buffer + * @addr 64 bits dma address + */ +struct iwl_tfh_tb { + __le16 tb_len; + __le64 addr; +} __packed; + +/** + * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM. + * Both driver and device share these circular buffers, each of which must be + * contiguous 256 TFDs. + * For pre a000 HW it is 256 x 128 bytes-per-TFD = 32 KBytes + * For a000 HW and on it is 256 x 256 bytes-per-TFD = 65 KBytes + * + * Driver must indicate the physical address of the base of each + * circular buffer via the FH_MEM_CBBC_QUEUE registers. + * + * Each TFD contains pointer/size information for up to 20 / 25 data buffers + * in host DRAM. These buffers collectively contain the (one) frame described + * by the TFD. Each buffer must be a single contiguous block of memory within + * itself, but buffers may be scattered in host DRAM. Each buffer has max size + * of (4K - 4). The concatenates all of a TFD's buffers into a single + * Tx frame, up to 8 KBytes in size. + * + * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx. + */ + +/** + * struct iwl_tfd - Transmit Frame Descriptor (TFD) + * @ __reserved1[3] reserved + * @ num_tbs 0-4 number of active tbs + * 5 reserved + * 6-7 padding (not used) + * @ tbs[20] transmit frame buffer descriptors + * @ __pad padding + */ +struct iwl_tfd { + u8 __reserved1[3]; + u8 num_tbs; + struct iwl_tfd_tb tbs[IWL_NUM_OF_TBS]; + __le32 __pad; +} __packed; + +/** + * struct iwl_tfh_tfd - Transmit Frame Descriptor (TFD) + * @ num_tbs 0-4 number of active tbs + * 5 -15 reserved + * @ tbs[25] transmit frame buffer descriptors + * @ __pad padding + */ +struct iwl_tfh_tfd { + __le16 num_tbs; + struct iwl_tfh_tb tbs[IWL_TFH_NUM_TBS]; + __le32 __pad; +} __packed; + +/* Keep Warm Size */ +#define IWL_KW_SIZE 0x1000 /* 4k */ + +/* Fixed (non-configurable) rx data from phy */ + +/** + * struct iwlagn_schedq_bc_tbl scheduler byte count table + * base physical address provided by SCD_DRAM_BASE_ADDR + * For devices up to a000: + * @tfd_offset 0-12 - tx command byte count + * 12-16 - station index + * For a000 and on: + * @tfd_offset 0-12 - tx command byte count + * 12-13 - number of 64 byte chunks + * 14-16 - reserved + */ +struct iwlagn_scd_bc_tbl { + __le16 tfd_offset[TFD_QUEUE_BC_SIZE]; +} __packed; + +#endif /* !__iwl_fh_h__ */ -- cgit v1.2.3