From 52409fae3e4b8d16b68b61902fc09075cd97b75d Mon Sep 17 00:00:00 2001 From: Dominik Sliwa Date: Sun, 2 Jul 2017 16:41:37 +0200 Subject: Backports generated from 4.11 kernel Initial commit. Signed-off-by: Dominik Sliwa --- .../net/wireless/intel/iwlwifi/mvm/fw-api-power.h | 472 +++++++++++++++++++++ 1 file changed, 472 insertions(+) create mode 100644 drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h (limited to 'drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h new file mode 100644 index 0000000..3fa43d1 --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h @@ -0,0 +1,472 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2015 - 2016 Intel Deutschland GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2015 - 2016 Intel Deutschland GmbH + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#ifndef __fw_api_power_h__ +#define __fw_api_power_h__ + +/* Power Management Commands, Responses, Notifications */ + +/** + * enum iwl_ltr_config_flags - masks for LTR config command flags + * @LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status + * @LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow + * memory access + * @LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR + * reg change + * @LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from + * D0 to D3 + * @LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register + * @LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register + * @LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD + */ +enum iwl_ltr_config_flags { + LTR_CFG_FLAG_FEATURE_ENABLE = BIT(0), + LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS = BIT(1), + LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH = BIT(2), + LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 = BIT(3), + LTR_CFG_FLAG_SW_SET_SHORT = BIT(4), + LTR_CFG_FLAG_SW_SET_LONG = BIT(5), + LTR_CFG_FLAG_DENIE_C10_ON_PD = BIT(6), +}; + +/** + * struct iwl_ltr_config_cmd_v1 - configures the LTR + * @flags: See %enum iwl_ltr_config_flags + */ +struct iwl_ltr_config_cmd_v1 { + __le32 flags; + __le32 static_long; + __le32 static_short; +} __packed; /* LTR_CAPABLE_API_S_VER_1 */ + +#define LTR_VALID_STATES_NUM 4 + +/** + * struct iwl_ltr_config_cmd - configures the LTR + * @flags: See %enum iwl_ltr_config_flags + * @static_long: + * @static_short: + * @ltr_cfg_values: + * @ltr_short_idle_timeout: + */ +struct iwl_ltr_config_cmd { + __le32 flags; + __le32 static_long; + __le32 static_short; + __le32 ltr_cfg_values[LTR_VALID_STATES_NUM]; + __le32 ltr_short_idle_timeout; +} __packed; /* LTR_CAPABLE_API_S_VER_2 */ + +/* Radio LP RX Energy Threshold measured in dBm */ +#define POWER_LPRX_RSSI_THRESHOLD 75 +#define POWER_LPRX_RSSI_THRESHOLD_MAX 94 +#define POWER_LPRX_RSSI_THRESHOLD_MIN 30 + +/** + * enum iwl_power_flags - masks for power table command flags + * @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off + * receiver and transmitter. '0' - does not allow. + * @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management, + * '1' Driver enables PM (use rest of parameters) + * @POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM, + * '1' PM could sleep over DTIM till listen Interval. + * @POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all + * access categories are both delivery and trigger enabled. + * @POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and + * PBW Snoozing enabled + * @POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask + * @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable. + * @POWER_FLAGS_AP_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving + * detection enablement +*/ +enum iwl_power_flags { + POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0), + POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK = BIT(1), + POWER_FLAGS_SKIP_OVER_DTIM_MSK = BIT(2), + POWER_FLAGS_SNOOZE_ENA_MSK = BIT(5), + POWER_FLAGS_BT_SCO_ENA = BIT(8), + POWER_FLAGS_ADVANCE_PM_ENA_MSK = BIT(9), + POWER_FLAGS_LPRX_ENA_MSK = BIT(11), + POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK = BIT(12), +}; + +#define IWL_POWER_VEC_SIZE 5 + +/** + * struct iwl_powertable_cmd - legacy power command. Beside old API support this + * is used also with a new power API for device wide power settings. + * POWER_TABLE_CMD = 0x77 (command, has simple generic response) + * + * @flags: Power table command flags from POWER_FLAGS_* + * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. + * Minimum allowed:- 3 * DTIM. Keep alive period must be + * set regardless of power scheme or current power state. + * FW use this value also when PM is disabled. + * @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to + * PSM transition - legacy PM + * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to + * PSM transition - legacy PM + * @sleep_interval: not in use + * @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag + * is set. For example, if it is required to skip over + * one DTIM, this value need to be set to 2 (DTIM periods). + * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. + * Default: 80dbm + */ +struct iwl_powertable_cmd { + /* PM_POWER_TABLE_CMD_API_S_VER_6 */ + __le16 flags; + u8 keep_alive_seconds; + u8 debug_flags; + __le32 rx_data_timeout; + __le32 tx_data_timeout; + __le32 sleep_interval[IWL_POWER_VEC_SIZE]; + __le32 skip_dtim_periods; + __le32 lprx_rssi_threshold; +} __packed; + +/** + * enum iwl_device_power_flags - masks for device power command flags + * @DEVIC_POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off + * receiver and transmitter. '0' - does not allow. +*/ +enum iwl_device_power_flags { + DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0), +}; + +/** + * struct iwl_device_power_cmd - device wide power command. + * DEVICE_POWER_CMD = 0x77 (command, has simple generic response) + * + * @flags: Power table command flags from DEVICE_POWER_FLAGS_* + */ +struct iwl_device_power_cmd { + /* PM_POWER_TABLE_CMD_API_S_VER_6 */ + __le16 flags; + __le16 reserved; +} __packed; + +/** + * struct iwl_mac_power_cmd - New power command containing uAPSD support + * MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response) + * @id_and_color: MAC contex identifier + * @flags: Power table command flags from POWER_FLAGS_* + * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. + * Minimum allowed:- 3 * DTIM. Keep alive period must be + * set regardless of power scheme or current power state. + * FW use this value also when PM is disabled. + * @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to + * PSM transition - legacy PM + * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to + * PSM transition - legacy PM + * @sleep_interval: not in use + * @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag + * is set. For example, if it is required to skip over + * one DTIM, this value need to be set to 2 (DTIM periods). + * @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to + * PSM transition - uAPSD + * @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to + * PSM transition - uAPSD + * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. + * Default: 80dbm + * @num_skip_dtim: Number of DTIMs to skip if Skip over DTIM flag is set + * @snooze_interval: Maximum time between attempts to retrieve buffered data + * from the AP [msec] + * @snooze_window: A window of time in which PBW snoozing insures that all + * packets received. It is also the minimum time from last + * received unicast RX packet, before client stops snoozing + * for data. [msec] + * @snooze_step: TBD + * @qndp_tid: TID client shall use for uAPSD QNDP triggers + * @uapsd_ac_flags: Set trigger-enabled and delivery-enabled indication for + * each corresponding AC. + * Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values. + * @uapsd_max_sp: Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct + * values. + * @heavy_tx_thld_packets: TX threshold measured in number of packets + * @heavy_rx_thld_packets: RX threshold measured in number of packets + * @heavy_tx_thld_percentage: TX threshold measured in load's percentage + * @heavy_rx_thld_percentage: RX threshold measured in load's percentage + * @limited_ps_threshold: +*/ +struct iwl_mac_power_cmd { + /* CONTEXT_DESC_API_T_VER_1 */ + __le32 id_and_color; + + /* CLIENT_PM_POWER_TABLE_S_VER_1 */ + __le16 flags; + __le16 keep_alive_seconds; + __le32 rx_data_timeout; + __le32 tx_data_timeout; + __le32 rx_data_timeout_uapsd; + __le32 tx_data_timeout_uapsd; + u8 lprx_rssi_threshold; + u8 skip_dtim_periods; + __le16 snooze_interval; + __le16 snooze_window; + u8 snooze_step; + u8 qndp_tid; + u8 uapsd_ac_flags; + u8 uapsd_max_sp; + u8 heavy_tx_thld_packets; + u8 heavy_rx_thld_packets; + u8 heavy_tx_thld_percentage; + u8 heavy_rx_thld_percentage; + u8 limited_ps_threshold; + u8 reserved; +} __packed; + +/* + * struct iwl_uapsd_misbehaving_ap_notif - FW sends this notification when + * associated AP is identified as improperly implementing uAPSD protocol. + * PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78 + * @sta_id: index of station in uCode's station table - associated AP ID in + * this context. + */ +struct iwl_uapsd_misbehaving_ap_notif { + __le32 sta_id; + u8 mac_id; + u8 reserved[3]; +} __packed; + +/** + * struct iwl_reduce_tx_power_cmd - TX power reduction command + * REDUCE_TX_POWER_CMD = 0x9f + * @flags: (reserved for future implementation) + * @mac_context_id: id of the mac ctx for which we are reducing TX power. + * @pwr_restriction: TX power restriction in dBms. + */ +struct iwl_reduce_tx_power_cmd { + u8 flags; + u8 mac_context_id; + __le16 pwr_restriction; +} __packed; /* TX_REDUCED_POWER_API_S_VER_1 */ + +enum iwl_dev_tx_power_cmd_mode { + IWL_TX_POWER_MODE_SET_MAC = 0, + IWL_TX_POWER_MODE_SET_DEVICE = 1, + IWL_TX_POWER_MODE_SET_CHAINS = 2, + IWL_TX_POWER_MODE_SET_ACK = 3, +}; /* TX_POWER_REDUCED_FLAGS_TYPE_API_E_VER_4 */; + +#define IWL_NUM_CHAIN_LIMITS 2 +#define IWL_NUM_SUB_BANDS 5 + +/** + * struct iwl_dev_tx_power_cmd - TX power reduction command + * @set_mode: see &enum iwl_dev_tx_power_cmd_mode + * @mac_context_id: id of the mac ctx for which we are reducing TX power. + * @pwr_restriction: TX power restriction in 1/8 dBms. + * @dev_24: device TX power restriction in 1/8 dBms + * @dev_52_low: device TX power restriction upper band - low + * @dev_52_high: device TX power restriction upper band - high + * @per_chain_restriction: per chain restrictions + */ +struct iwl_dev_tx_power_cmd_v3 { + __le32 set_mode; + __le32 mac_context_id; + __le16 pwr_restriction; + __le16 dev_24; + __le16 dev_52_low; + __le16 dev_52_high; + __le16 per_chain_restriction[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS]; +} __packed; /* TX_REDUCED_POWER_API_S_VER_3 */ + +#define IWL_DEV_MAX_TX_POWER 0x7FFF + +/** + * struct iwl_dev_tx_power_cmd - TX power reduction command + * @v3: version 3 of the command, embedded here for easier software handling + * @enable_ack_reduction: enable or disable close range ack TX power + * reduction. + */ +struct iwl_dev_tx_power_cmd { + /* v4 is just an extension of v3 - keep this here */ + struct iwl_dev_tx_power_cmd_v3 v3; + u8 enable_ack_reduction; + u8 reserved[3]; +} __packed; /* TX_REDUCED_POWER_API_S_VER_4 */ + +/** + * struct iwl_beacon_filter_cmd + * REPLY_BEACON_FILTERING_CMD = 0xd2 (command) + * @id_and_color: MAC contex identifier + * @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon + * to driver if delta in Energy values calculated for this and last + * passed beacon is greater than this threshold. Zero value means that + * the Energy change is ignored for beacon filtering, and beacon will + * not be forced to be sent to driver regardless of this delta. Typical + * energy delta 5dB. + * @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state. + * Send beacon to driver if delta in Energy values calculated for this + * and last passed beacon is greater than this threshold. Zero value + * means that the Energy change is ignored for beacon filtering while in + * Roaming state, typical energy delta 1dB. + * @bf_roaming_state: Used for RSSI filtering. If absolute Energy values + * calculated for current beacon is less than the threshold, use + * Roaming Energy Delta Threshold, otherwise use normal Energy Delta + * Threshold. Typical energy threshold is -72dBm. + * @bf_temp_threshold: This threshold determines the type of temperature + * filtering (Slow or Fast) that is selected (Units are in Celsuis): + * If the current temperature is above this threshold - Fast filter + * will be used, If the current temperature is below this threshold - + * Slow filter will be used. + * @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values + * calculated for this and the last passed beacon is greater than this + * threshold. Zero value means that the temperature change is ignored for + * beacon filtering; beacons will not be forced to be sent to driver + * regardless of whether its temerature has been changed. + * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values + * calculated for this and the last passed beacon is greater than this + * threshold. Zero value means that the temperature change is ignored for + * beacon filtering; beacons will not be forced to be sent to driver + * regardless of whether its temerature has been changed. + * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled. + * @bf_filter_escape_timer: Send beacons to to driver if no beacons were passed + * for a specific period of time. Units: Beacons. + * @ba_escape_timer: Fully receive and parse beacon if no beacons were passed + * for a longer period of time then this escape-timeout. Units: Beacons. + * @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled. + */ +struct iwl_beacon_filter_cmd { + __le32 bf_energy_delta; + __le32 bf_roaming_energy_delta; + __le32 bf_roaming_state; + __le32 bf_temp_threshold; + __le32 bf_temp_fast_filter; + __le32 bf_temp_slow_filter; + __le32 bf_enable_beacon_filter; + __le32 bf_debug_flag; + __le32 bf_escape_timer; + __le32 ba_escape_timer; + __le32 ba_enable_beacon_abort; +} __packed; + +/* Beacon filtering and beacon abort */ +#define IWL_BF_ENERGY_DELTA_DEFAULT 5 +#define IWL_BF_ENERGY_DELTA_D0I3 20 +#define IWL_BF_ENERGY_DELTA_MAX 255 +#define IWL_BF_ENERGY_DELTA_MIN 0 + +#define IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT 1 +#define IWL_BF_ROAMING_ENERGY_DELTA_D0I3 20 +#define IWL_BF_ROAMING_ENERGY_DELTA_MAX 255 +#define IWL_BF_ROAMING_ENERGY_DELTA_MIN 0 + +#define IWL_BF_ROAMING_STATE_DEFAULT 72 +#define IWL_BF_ROAMING_STATE_D0I3 72 +#define IWL_BF_ROAMING_STATE_MAX 255 +#define IWL_BF_ROAMING_STATE_MIN 0 + +#define IWL_BF_TEMP_THRESHOLD_DEFAULT 112 +#define IWL_BF_TEMP_THRESHOLD_D0I3 112 +#define IWL_BF_TEMP_THRESHOLD_MAX 255 +#define IWL_BF_TEMP_THRESHOLD_MIN 0 + +#define IWL_BF_TEMP_FAST_FILTER_DEFAULT 1 +#define IWL_BF_TEMP_FAST_FILTER_D0I3 1 +#define IWL_BF_TEMP_FAST_FILTER_MAX 255 +#define IWL_BF_TEMP_FAST_FILTER_MIN 0 + +#define IWL_BF_TEMP_SLOW_FILTER_DEFAULT 5 +#define IWL_BF_TEMP_SLOW_FILTER_D0I3 20 +#define IWL_BF_TEMP_SLOW_FILTER_MAX 255 +#define IWL_BF_TEMP_SLOW_FILTER_MIN 0 + +#define IWL_BF_ENABLE_BEACON_FILTER_DEFAULT 1 + +#define IWL_BF_DEBUG_FLAG_DEFAULT 0 +#define IWL_BF_DEBUG_FLAG_D0I3 0 + +#define IWL_BF_ESCAPE_TIMER_DEFAULT 0 +#define IWL_BF_ESCAPE_TIMER_D0I3 0 +#define IWL_BF_ESCAPE_TIMER_MAX 1024 +#define IWL_BF_ESCAPE_TIMER_MIN 0 + +#define IWL_BA_ESCAPE_TIMER_DEFAULT 6 +#define IWL_BA_ESCAPE_TIMER_D0I3 6 +#define IWL_BA_ESCAPE_TIMER_D3 9 +#define IWL_BA_ESCAPE_TIMER_MAX 1024 +#define IWL_BA_ESCAPE_TIMER_MIN 0 + +#define IWL_BA_ENABLE_BEACON_ABORT_DEFAULT 1 + +#define IWL_BF_CMD_CONFIG(mode) \ + .bf_energy_delta = cpu_to_le32(IWL_BF_ENERGY_DELTA ## mode), \ + .bf_roaming_energy_delta = \ + cpu_to_le32(IWL_BF_ROAMING_ENERGY_DELTA ## mode), \ + .bf_roaming_state = cpu_to_le32(IWL_BF_ROAMING_STATE ## mode), \ + .bf_temp_threshold = cpu_to_le32(IWL_BF_TEMP_THRESHOLD ## mode), \ + .bf_temp_fast_filter = cpu_to_le32(IWL_BF_TEMP_FAST_FILTER ## mode), \ + .bf_temp_slow_filter = cpu_to_le32(IWL_BF_TEMP_SLOW_FILTER ## mode), \ + .bf_debug_flag = cpu_to_le32(IWL_BF_DEBUG_FLAG ## mode), \ + .bf_escape_timer = cpu_to_le32(IWL_BF_ESCAPE_TIMER ## mode), \ + .ba_escape_timer = cpu_to_le32(IWL_BA_ESCAPE_TIMER ## mode) + +#define IWL_BF_CMD_CONFIG_DEFAULTS IWL_BF_CMD_CONFIG(_DEFAULT) +#define IWL_BF_CMD_CONFIG_D0I3 IWL_BF_CMD_CONFIG(_D0I3) +#endif -- cgit v1.2.3