From 52409fae3e4b8d16b68b61902fc09075cd97b75d Mon Sep 17 00:00:00 2001 From: Dominik Sliwa Date: Sun, 2 Jul 2017 16:41:37 +0200 Subject: Backports generated from 4.11 kernel Initial commit. Signed-off-by: Dominik Sliwa --- drivers/net/wireless/realtek/rtlwifi/usb.h | 165 +++++++++++++++++++++++++++++ 1 file changed, 165 insertions(+) create mode 100644 drivers/net/wireless/realtek/rtlwifi/usb.h (limited to 'drivers/net/wireless/realtek/rtlwifi/usb.h') diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.h b/drivers/net/wireless/realtek/rtlwifi/usb.h new file mode 100644 index 0000000..c91cec0 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/usb.h @@ -0,0 +1,165 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2012 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + *****************************************************************************/ + +#ifndef __RTL_USB_H__ +#define __RTL_USB_H__ + +#include + +#define RTL_RX_DESC_SIZE 24 + +#define RTL_USB_DEVICE(vend, prod, cfg) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .driver_info = (kernel_ulong_t)&(cfg) + +#define USB_HIGH_SPEED_BULK_SIZE 512 +#define USB_FULL_SPEED_BULK_SIZE 64 + + +#define RTL_USB_MAX_TXQ_NUM 4 /* max tx queue */ +#define RTL_USB_MAX_EP_NUM 6 /* max ep number */ +#define RTL_USB_MAX_TX_URBS_NUM 8 + +enum rtl_txq { + /* These definitions shall be consistent with value + * returned by skb_get_queue_mapping + *------------------------------------*/ + RTL_TXQ_BK, + RTL_TXQ_BE, + RTL_TXQ_VI, + RTL_TXQ_VO, + /*------------------------------------*/ + RTL_TXQ_BCN, + RTL_TXQ_MGT, + RTL_TXQ_HI, + + /* Must be last */ + __RTL_TXQ_NUM, +}; + +struct rtl_ep_map { + u32 ep_mapping[__RTL_TXQ_NUM]; +}; + +struct _trx_info { + struct rtl_usb *rtlusb; + u32 ep_num; +}; + +static inline void _rtl_install_trx_info(struct rtl_usb *rtlusb, + struct sk_buff *skb, + u32 ep_num) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + info->rate_driver_data[0] = rtlusb; + info->rate_driver_data[1] = (void *)(__kernel_size_t)ep_num; +} + + +/* Add suspend/resume later */ +enum rtl_usb_state { + USB_STATE_STOP = 0, + USB_STATE_START = 1, +}; + +#define IS_USB_STOP(rtlusb_ptr) (USB_STATE_STOP == (rtlusb_ptr)->state) +#define IS_USB_START(rtlusb_ptr) (USB_STATE_START == (rtlusb_ptr)->state) +#define SET_USB_STOP(rtlusb_ptr) \ + do { \ + (rtlusb_ptr)->state = USB_STATE_STOP; \ + } while (0) + +#define SET_USB_START(rtlusb_ptr) \ + do { \ + (rtlusb_ptr)->state = USB_STATE_START; \ + } while (0) + +struct rtl_usb { + struct usb_device *udev; + struct usb_interface *intf; + enum rtl_usb_state state; + + /* Bcn control register setting */ + u32 reg_bcn_ctrl_val; + /* for 88/92cu card disable */ + u8 disableHWSM; + /*QOS & EDCA */ + enum acm_method acm_method; + /* irq . HIMR,HIMR_EX */ + u32 irq_mask[2]; + bool irq_enabled; + + u16 (*usb_mq_to_hwq)(__le16 fc, u16 mac80211_queue_index); + + /* Tx */ + u8 out_ep_nums ; + u8 out_queue_sel; + struct rtl_ep_map ep_map; + + u32 max_bulk_out_size; + u32 tx_submitted_urbs; + struct sk_buff_head tx_skb_queue[RTL_USB_MAX_EP_NUM]; + + struct usb_anchor tx_pending[RTL_USB_MAX_EP_NUM]; + struct usb_anchor tx_submitted; + + struct sk_buff *(*usb_tx_aggregate_hdl)(struct ieee80211_hw *, + struct sk_buff_head *); + int (*usb_tx_post_hdl)(struct ieee80211_hw *, + struct urb *, struct sk_buff *); + void (*usb_tx_cleanup)(struct ieee80211_hw *, struct sk_buff *); + + /* Rx */ + u8 in_ep_nums; + u32 in_ep; /* Bulk IN endpoint number */ + u32 rx_max_size; /* Bulk IN max buffer size */ + u32 rx_urb_num; /* How many Bulk INs are submitted to host. */ + struct usb_anchor rx_submitted; + struct usb_anchor rx_cleanup_urbs; + struct tasklet_struct rx_work_tasklet; + struct sk_buff_head rx_queue; + void (*usb_rx_segregate_hdl)(struct ieee80211_hw *, struct sk_buff *, + struct sk_buff_head *); + void (*usb_rx_hdl)(struct ieee80211_hw *, struct sk_buff *); +}; + +struct rtl_usb_priv { + struct bt_coexist_info bt_coexist; + struct rtl_usb dev; +}; + +#define rtl_usbpriv(hw) (((struct rtl_usb_priv *)(rtl_priv(hw))->priv)) +#define rtl_usbdev(usbpriv) (&((usbpriv)->dev)) + + + +int rtl_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id, + struct rtl_hal_cfg *rtl92cu_hal_cfg); +void rtl_usb_disconnect(struct usb_interface *intf); +int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message); +int rtl_usb_resume(struct usb_interface *pusb_intf); + +#endif -- cgit v1.2.3