From 52409fae3e4b8d16b68b61902fc09075cd97b75d Mon Sep 17 00:00:00 2001 From: Dominik Sliwa Date: Sun, 2 Jul 2017 16:41:37 +0200 Subject: Backports generated from 4.11 kernel Initial commit. Signed-off-by: Dominik Sliwa --- drivers/net/wireless/ti/wl1251/cmd.c | 514 +++++++++++++++++++++++++++++++++++ 1 file changed, 514 insertions(+) create mode 100644 drivers/net/wireless/ti/wl1251/cmd.c (limited to 'drivers/net/wireless/ti/wl1251/cmd.c') diff --git a/drivers/net/wireless/ti/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c new file mode 100644 index 0000000..ede31f0 --- /dev/null +++ b/drivers/net/wireless/ti/wl1251/cmd.c @@ -0,0 +1,514 @@ +#include "cmd.h" + +#include +#include +#include + +#include "wl1251.h" +#include "reg.h" +#include "io.h" +#include "ps.h" +#include "acx.h" + +/** + * send command to firmware + * + * @wl: wl struct + * @id: command id + * @buf: buffer containing the command, must work with dma + * @len: length of the buffer + */ +int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len) +{ + struct wl1251_cmd_header *cmd; + unsigned long timeout; + u32 intr; + int ret = 0; + + cmd = buf; + cmd->id = id; + cmd->status = 0; + + WARN_ON(len % 4 != 0); + + wl1251_mem_write(wl, wl->cmd_box_addr, buf, len); + + wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD); + + timeout = jiffies + msecs_to_jiffies(WL1251_COMMAND_TIMEOUT); + + intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); + while (!(intr & WL1251_ACX_INTR_CMD_COMPLETE)) { + if (time_after(jiffies, timeout)) { + wl1251_error("command complete timeout"); + ret = -ETIMEDOUT; + goto out; + } + + msleep(1); + + intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); + } + + wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK, + WL1251_ACX_INTR_CMD_COMPLETE); + +out: + return ret; +} + +/** + * send test command to firmware + * + * @wl: wl struct + * @buf: buffer containing the command, with all headers, must work with dma + * @len: length of the buffer + * @answer: is answer needed + */ +int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer) +{ + int ret; + + wl1251_debug(DEBUG_CMD, "cmd test"); + + ret = wl1251_cmd_send(wl, CMD_TEST, buf, buf_len); + + if (ret < 0) { + wl1251_warning("TEST command failed"); + return ret; + } + + if (answer) { + struct wl1251_command *cmd_answer; + + /* + * The test command got in, we can read the answer. + * The answer would be a wl1251_command, where the + * parameter array contains the actual answer. + */ + wl1251_mem_read(wl, wl->cmd_box_addr, buf, buf_len); + + cmd_answer = buf; + + if (cmd_answer->header.status != CMD_STATUS_SUCCESS) + wl1251_error("TEST command answer error: %d", + cmd_answer->header.status); + } + + return 0; +} + +/** + * read acx from firmware + * + * @wl: wl struct + * @id: acx id + * @buf: buffer for the response, including all headers, must work with dma + * @len: length of buf + */ +int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len) +{ + struct acx_header *acx = buf; + int ret; + + wl1251_debug(DEBUG_CMD, "cmd interrogate"); + + acx->id = id; + + /* payload length, does not include any headers */ + acx->len = len - sizeof(*acx); + + ret = wl1251_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx)); + if (ret < 0) { + wl1251_error("INTERROGATE command failed"); + goto out; + } + + /* the interrogate command got in, we can read the answer */ + wl1251_mem_read(wl, wl->cmd_box_addr, buf, len); + + acx = buf; + if (acx->cmd.status != CMD_STATUS_SUCCESS) + wl1251_error("INTERROGATE command error: %d", + acx->cmd.status); + +out: + return ret; +} + +/** + * write acx value to firmware + * + * @wl: wl struct + * @id: acx id + * @buf: buffer containing acx, including all headers, must work with dma + * @len: length of buf + */ +int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len) +{ + struct acx_header *acx = buf; + int ret; + + wl1251_debug(DEBUG_CMD, "cmd configure"); + + acx->id = id; + + /* payload length, does not include any headers */ + acx->len = len - sizeof(*acx); + + ret = wl1251_cmd_send(wl, CMD_CONFIGURE, acx, len); + if (ret < 0) { + wl1251_warning("CONFIGURE command NOK"); + return ret; + } + + return 0; +} + +int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity, + void *bitmap, u16 bitmap_len, u8 bitmap_control) +{ + struct wl1251_cmd_vbm_update *vbm; + int ret; + + wl1251_debug(DEBUG_CMD, "cmd vbm"); + + vbm = kzalloc(sizeof(*vbm), GFP_KERNEL); + if (!vbm) { + ret = -ENOMEM; + goto out; + } + + /* Count and period will be filled by the target */ + vbm->tim.bitmap_ctrl = bitmap_control; + if (bitmap_len > PARTIAL_VBM_MAX) { + wl1251_warning("cmd vbm len is %d B, truncating to %d", + bitmap_len, PARTIAL_VBM_MAX); + bitmap_len = PARTIAL_VBM_MAX; + } + memcpy(vbm->tim.pvb_field, bitmap, bitmap_len); + vbm->tim.identity = identity; + vbm->tim.length = bitmap_len + 3; + + vbm->len = cpu_to_le16(bitmap_len + 5); + + ret = wl1251_cmd_send(wl, CMD_VBM, vbm, sizeof(*vbm)); + if (ret < 0) { + wl1251_error("VBM command failed"); + goto out; + } + +out: + kfree(vbm); + return ret; +} + +int wl1251_cmd_data_path_rx(struct wl1251 *wl, u8 channel, bool enable) +{ + struct cmd_enabledisable_path *cmd; + int ret; + u16 cmd_rx; + + wl1251_debug(DEBUG_CMD, "cmd data path"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->channel = channel; + + if (enable) + cmd_rx = CMD_ENABLE_RX; + else + cmd_rx = CMD_DISABLE_RX; + + ret = wl1251_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd)); + if (ret < 0) { + wl1251_error("rx %s cmd for channel %d failed", + enable ? "start" : "stop", channel); + goto out; + } + + wl1251_debug(DEBUG_BOOT, "rx %s cmd channel %d", + enable ? "start" : "stop", channel); + +out: + kfree(cmd); + return ret; +} + +int wl1251_cmd_data_path_tx(struct wl1251 *wl, u8 channel, bool enable) +{ + struct cmd_enabledisable_path *cmd; + int ret; + u16 cmd_tx; + + wl1251_debug(DEBUG_CMD, "cmd data path"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->channel = channel; + + if (enable) + cmd_tx = CMD_ENABLE_TX; + else + cmd_tx = CMD_DISABLE_TX; + + ret = wl1251_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd)); + if (ret < 0) + wl1251_error("tx %s cmd for channel %d failed", + enable ? "start" : "stop", channel); + else + wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d", + enable ? "start" : "stop", channel); + + kfree(cmd); + return ret; +} + +int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel, + u16 beacon_interval, u8 dtim_interval) +{ + struct cmd_join *join; + int ret, i; + u8 *bssid; + + join = kzalloc(sizeof(*join), GFP_KERNEL); + if (!join) { + ret = -ENOMEM; + goto out; + } + + wl1251_debug(DEBUG_CMD, "cmd join%s ch %d %d/%d", + bss_type == BSS_TYPE_IBSS ? " ibss" : "", + channel, beacon_interval, dtim_interval); + + /* Reverse order BSSID */ + bssid = (u8 *) &join->bssid_lsb; + for (i = 0; i < ETH_ALEN; i++) + bssid[i] = wl->bssid[ETH_ALEN - i - 1]; + + join->rx_config_options = wl->rx_config; + join->rx_filter_options = wl->rx_filter; + + join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS | + RATE_MASK_5_5MBPS | RATE_MASK_11MBPS; + + join->beacon_interval = beacon_interval; + join->dtim_interval = dtim_interval; + join->bss_type = bss_type; + join->channel = channel; + join->ctrl = JOIN_CMD_CTRL_TX_FLUSH; + + ret = wl1251_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join)); + if (ret < 0) { + wl1251_error("failed to initiate cmd join"); + goto out; + } + +out: + kfree(join); + return ret; +} + +int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode) +{ + struct wl1251_cmd_ps_params *ps_params = NULL; + int ret = 0; + + wl1251_debug(DEBUG_CMD, "cmd set ps mode"); + + ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL); + if (!ps_params) { + ret = -ENOMEM; + goto out; + } + + ps_params->ps_mode = ps_mode; + ps_params->send_null_data = 1; + ps_params->retries = 5; + ps_params->hang_over_period = 128; + ps_params->null_data_rate = 1; /* 1 Mbps */ + + ret = wl1251_cmd_send(wl, CMD_SET_PS_MODE, ps_params, + sizeof(*ps_params)); + if (ret < 0) { + wl1251_error("cmd set_ps_mode failed"); + goto out; + } + +out: + kfree(ps_params); + return ret; +} + +int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer, + size_t len) +{ + struct cmd_read_write_memory *cmd; + int ret = 0; + + wl1251_debug(DEBUG_CMD, "cmd read memory"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + WARN_ON(len > MAX_READ_SIZE); + len = min_t(size_t, len, MAX_READ_SIZE); + + cmd->addr = addr; + cmd->size = len; + + ret = wl1251_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd)); + if (ret < 0) { + wl1251_error("read memory command failed: %d", ret); + goto out; + } + + /* the read command got in, we can now read the answer */ + wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd)); + + if (cmd->header.status != CMD_STATUS_SUCCESS) + wl1251_error("error in read command result: %d", + cmd->header.status); + + memcpy(answer, cmd->value, len); + +out: + kfree(cmd); + return ret; +} + +int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id, + void *buf, size_t buf_len) +{ + struct wl1251_cmd_packet_template *cmd; + size_t cmd_len; + int ret = 0; + + wl1251_debug(DEBUG_CMD, "cmd template %d", cmd_id); + + WARN_ON(buf_len > WL1251_MAX_TEMPLATE_SIZE); + buf_len = min_t(size_t, buf_len, WL1251_MAX_TEMPLATE_SIZE); + cmd_len = ALIGN(sizeof(*cmd) + buf_len, 4); + + cmd = kzalloc(cmd_len, GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->size = cpu_to_le16(buf_len); + + if (buf) + memcpy(cmd->data, buf, buf_len); + + ret = wl1251_cmd_send(wl, cmd_id, cmd, cmd_len); + if (ret < 0) { + wl1251_warning("cmd set_template failed: %d", ret); + goto out; + } + +out: + kfree(cmd); + return ret; +} + +int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len, + struct ieee80211_channel *channels[], + unsigned int n_channels, unsigned int n_probes) +{ + struct wl1251_cmd_scan *cmd; + int i, ret = 0; + + wl1251_debug(DEBUG_CMD, "cmd scan channels %d", n_channels); + + WARN_ON(n_channels > SCAN_MAX_NUM_OF_CHANNELS); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD); + cmd->params.rx_filter_options = cpu_to_le32(CFG_RX_PRSP_EN | + CFG_RX_MGMT_EN | + CFG_RX_BCN_EN); + cmd->params.scan_options = 0; + /* + * Use high priority scan when not associated to prevent fw issue + * causing never-ending scans (sometimes 20+ minutes). + * Note: This bug may be caused by the fw's DTIM handling. + */ + if (is_zero_ether_addr(wl->bssid)) + cmd->params.scan_options |= cpu_to_le16(WL1251_SCAN_OPT_PRIORITY_HIGH); + cmd->params.num_channels = n_channels; + cmd->params.num_probe_requests = n_probes; + cmd->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */ + cmd->params.tid_trigger = 0; + + for (i = 0; i < n_channels; i++) { + cmd->channels[i].min_duration = + cpu_to_le32(WL1251_SCAN_MIN_DURATION); + cmd->channels[i].max_duration = + cpu_to_le32(WL1251_SCAN_MAX_DURATION); + memset(&cmd->channels[i].bssid_lsb, 0xff, 4); + memset(&cmd->channels[i].bssid_msb, 0xff, 2); + cmd->channels[i].early_termination = 0; + cmd->channels[i].tx_power_att = 0; + cmd->channels[i].channel = channels[i]->hw_value; + } + + cmd->params.ssid_len = ssid_len; + if (ssid) + memcpy(cmd->params.ssid, ssid, ssid_len); + + ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd)); + if (ret < 0) { + wl1251_error("cmd scan failed: %d", ret); + goto out; + } + + wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd)); + + if (cmd->header.status != CMD_STATUS_SUCCESS) { + wl1251_error("cmd scan status wasn't success: %d", + cmd->header.status); + ret = -EIO; + goto out; + } + +out: + kfree(cmd); + return ret; +} + +int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout) +{ + struct wl1251_cmd_trigger_scan_to *cmd; + int ret; + + wl1251_debug(DEBUG_CMD, "cmd trigger scan to"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->timeout = timeout; + + ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, cmd, sizeof(*cmd)); + if (ret < 0) { + wl1251_error("cmd trigger scan to failed: %d", ret); + goto out; + } + +out: + kfree(cmd); + return ret; +} -- cgit v1.2.3