From 52409fae3e4b8d16b68b61902fc09075cd97b75d Mon Sep 17 00:00:00 2001 From: Dominik Sliwa Date: Sun, 2 Jul 2017 16:41:37 +0200 Subject: Backports generated from 4.11 kernel Initial commit. Signed-off-by: Dominik Sliwa --- include/linux/ssb/ssb_driver_gige.h | 193 ++++++++++++++++++++++++++++++++++++ 1 file changed, 193 insertions(+) create mode 100644 include/linux/ssb/ssb_driver_gige.h (limited to 'include/linux/ssb/ssb_driver_gige.h') diff --git a/include/linux/ssb/ssb_driver_gige.h b/include/linux/ssb/ssb_driver_gige.h new file mode 100644 index 0000000..7a45160 --- /dev/null +++ b/include/linux/ssb/ssb_driver_gige.h @@ -0,0 +1,193 @@ +#ifndef LINUX_SSB_DRIVER_GIGE_H_ +#define LINUX_SSB_DRIVER_GIGE_H_ + +#include +#include +#include +#include + + +#ifdef CPTCFG_SSB_DRIVER_GIGE + + +#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */ +#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */ +#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */ +#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */ +#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */ +#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */ +#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */ +#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */ +#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */ + +/* TM Status High flags */ +#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */ +/* TM Status Low flags */ +#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */ +#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */ +#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */ + +/* Boardflags (low) */ +#define SSB_GIGE_BFL_ROBOSWITCH 0x0010 + + +#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory" +#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O" + +struct ssb_gige { + struct ssb_device *dev; + + spinlock_t lock; + + /* True, if the device has an RGMII bus. + * False, if the device has a GMII bus. */ + bool has_rgmii; + + /* The PCI controller device. */ + struct pci_controller pci_controller; + struct pci_ops pci_ops; + struct resource mem_resource; + struct resource io_resource; +}; + +/* Check whether a PCI device is a SSB Gigabit Ethernet core. */ +extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev); + +/* Convert a pci_dev pointer to a ssb_gige pointer. */ +static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev) +{ + if (!pdev_is_ssb_gige_core(pdev)) + return NULL; + return container_of(pdev->bus->ops, struct ssb_gige, pci_ops); +} + +/* Returns whether the PHY is connected by an RGMII bus. */ +static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + return (dev ? dev->has_rgmii : 0); +} + +/* Returns whether we have a Roboswitch. */ +static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + if (dev) + return !!(dev->dev->bus->sprom.boardflags_lo & + SSB_GIGE_BFL_ROBOSWITCH); + return 0; +} + +/* Returns whether we can only do one DMA at once. */ +static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + if (dev) + return ((dev->dev->bus->chip_id == 0x4785) && + (dev->dev->bus->chip_rev < 2)); + return 0; +} + +/* Returns whether we must flush posted writes. */ +static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + if (dev) + return (dev->dev->bus->chip_id == 0x4785); + return 0; +} + +/* Get the device MAC address */ +static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + if (!dev) + return -ENODEV; + + memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6); + return 0; +} + +/* Get the device phy address */ +static inline int ssb_gige_get_phyaddr(struct pci_dev *pdev) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + if (!dev) + return -ENODEV; + + return dev->dev->bus->sprom.et0phyaddr; +} + +extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, + struct pci_dev *pdev); +extern int ssb_gige_map_irq(struct ssb_device *sdev, + const struct pci_dev *pdev); + +/* The GigE driver is not a standalone module, because we don't have support + * for unregistering the driver. So we could not unload the module anyway. */ +extern int ssb_gige_init(void); +static inline void ssb_gige_exit(void) +{ + /* Currently we can not unregister the GigE driver, + * because we can not unregister the PCI bridge. */ + BUG(); +} + + +#else /* CPTCFG_SSB_DRIVER_GIGE */ +/* Gigabit Ethernet driver disabled */ + + +static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, + struct pci_dev *pdev) +{ + return -ENOSYS; +} +static inline int ssb_gige_map_irq(struct ssb_device *sdev, + const struct pci_dev *pdev) +{ + return -ENOSYS; +} +static inline int ssb_gige_init(void) +{ + return 0; +} +static inline void ssb_gige_exit(void) +{ +} + +static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev) +{ + return 0; +} +static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev) +{ + return NULL; +} +static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev) +{ + return 0; +} +static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev) +{ + return 0; +} +static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev) +{ + return 0; +} +static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev) +{ + return 0; +} +static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) +{ + return -ENODEV; +} +static inline int ssb_gige_get_phyaddr(struct pci_dev *pdev) +{ + return -ENODEV; +} + +#endif /* CPTCFG_SSB_DRIVER_GIGE */ +#endif /* LINUX_SSB_DRIVER_GIGE_H_ */ -- cgit v1.2.3