/* * SPI Link Layer for ST NCI based Driver * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include #include #include #include #include #include #include "st-nci.h" #define DRIVER_DESC "NCI NFC driver for ST_NCI" /* ndlc header */ #define ST_NCI_FRAME_HEADROOM 1 #define ST_NCI_FRAME_TAILROOM 0 #define ST_NCI_SPI_MIN_SIZE 4 /* PCB(1) + NCI Packet header(3) */ #define ST_NCI_SPI_MAX_SIZE 250 /* req 4.2.1 */ #define ST_NCI_SPI_DRIVER_NAME "st_nci_spi" #define ST_NCI_GPIO_NAME_RESET "reset" struct st_nci_spi_phy { struct spi_device *spi_dev; struct llt_ndlc *ndlc; bool irq_active; unsigned int gpio_reset; unsigned int irq_polarity; struct st_nci_se_status se_status; }; static int st_nci_spi_enable(void *phy_id) { struct st_nci_spi_phy *phy = phy_id; gpio_set_value(phy->gpio_reset, 0); usleep_range(10000, 15000); gpio_set_value(phy->gpio_reset, 1); usleep_range(80000, 85000); if (phy->ndlc->powered == 0 && phy->irq_active == 0) { enable_irq(phy->spi_dev->irq); phy->irq_active = true; } return 0; } static void st_nci_spi_disable(void *phy_id) { struct st_nci_spi_phy *phy = phy_id; disable_irq_nosync(phy->spi_dev->irq); phy->irq_active = false; } /* * Writing a frame must not return the number of written bytes. * It must return either zero for success, or <0 for error. * In addition, it must not alter the skb */ static int st_nci_spi_write(void *phy_id, struct sk_buff *skb) { int r; struct st_nci_spi_phy *phy = phy_id; struct spi_device *dev = phy->spi_dev; struct sk_buff *skb_rx; u8 buf[ST_NCI_SPI_MAX_SIZE + NCI_DATA_HDR_SIZE + ST_NCI_FRAME_HEADROOM + ST_NCI_FRAME_TAILROOM]; struct spi_transfer spi_xfer = { .tx_buf = skb->data, .rx_buf = buf, .len = skb->len, }; if (phy->ndlc->hard_fault != 0) return phy->ndlc->hard_fault; r = spi_sync_transfer(dev, &spi_xfer, 1); /* * We may have received some valuable data on miso line. * Send them back in the ndlc state machine. */ if (!r) { skb_rx = alloc_skb(skb->len, GFP_KERNEL); if (!skb_rx) { r = -ENOMEM; goto exit; } skb_put(skb_rx, skb->len); memcpy(skb_rx->data, buf, skb->len); ndlc_recv(phy->ndlc, skb_rx); } exit: return r; } /* * Reads an ndlc frame and returns it in a newly allocated sk_buff. * returns: * 0 : if received frame is complete * -EREMOTEIO : i2c read error (fatal) * -EBADMSG : frame was incorrect and discarded * -ENOMEM : cannot allocate skb, frame dropped */ static int st_nci_spi_read(struct st_nci_spi_phy *phy, struct sk_buff **skb) { int r; u8 len; u8 buf[ST_NCI_SPI_MAX_SIZE]; struct spi_device *dev = phy->spi_dev; struct spi_transfer spi_xfer = { .rx_buf = buf, .len = ST_NCI_SPI_MIN_SIZE, }; r = spi_sync_transfer(dev, &spi_xfer, 1); if (r < 0) return -EREMOTEIO; len = be16_to_cpu(*(__be16 *) (buf + 2)); if (len > ST_NCI_SPI_MAX_SIZE) { nfc_err(&dev->dev, "invalid frame len\n"); phy->ndlc->hard_fault = 1; return -EBADMSG; } *skb = alloc_skb(ST_NCI_SPI_MIN_SIZE + len, GFP_KERNEL); if (*skb == NULL) return -ENOMEM; skb_reserve(*skb, ST_NCI_SPI_MIN_SIZE); skb_put(*skb, ST_NCI_SPI_MIN_SIZE); memcpy((*skb)->data, buf, ST_NCI_SPI_MIN_SIZE); if (!len) return 0; spi_xfer.len = len; r = spi_sync_transfer(dev, &spi_xfer, 1); if (r < 0) { kfree_skb(*skb); return -EREMOTEIO; } skb_put(*skb, len); memcpy((*skb)->data + ST_NCI_SPI_MIN_SIZE, buf, len); return 0; } /* * Reads an ndlc frame from the chip. * * On ST21NFCB, IRQ goes in idle state when read starts. */ static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id) { struct st_nci_spi_phy *phy = phy_id; struct spi_device *dev; struct sk_buff *skb = NULL; int r; if (!phy || !phy->ndlc || irq != phy->spi_dev->irq) { WARN_ON_ONCE(1); return IRQ_NONE; } dev = phy->spi_dev; dev_dbg(&dev->dev, "IRQ\n"); if (phy->ndlc->hard_fault) return IRQ_HANDLED; if (!phy->ndlc->powered) { st_nci_spi_disable(phy); return IRQ_HANDLED; } r = st_nci_spi_read(phy, &skb); if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG) return IRQ_HANDLED; ndlc_recv(phy->ndlc, skb); return IRQ_HANDLED; } static struct nfc_phy_ops spi_phy_ops = { .write = st_nci_spi_write, .enable = st_nci_spi_enable, .disable = st_nci_spi_disable, }; static int st_nci_spi_acpi_request_resources(struct spi_device *spi_dev) { struct st_nci_spi_phy *phy = spi_get_drvdata(spi_dev); struct gpio_desc *gpiod_reset; struct device *dev = &spi_dev->dev; u8 tmp; /* Get RESET GPIO from ACPI */ gpiod_reset = devm_gpiod_get_index(dev, ST_NCI_GPIO_NAME_RESET, 1, GPIOD_OUT_HIGH); if (IS_ERR(gpiod_reset)) { nfc_err(dev, "Unable to get RESET GPIO\n"); return -ENODEV; } phy->gpio_reset = desc_to_gpio(gpiod_reset); phy->irq_polarity = irq_get_trigger_type(spi_dev->irq); phy->se_status.is_ese_present = false; phy->se_status.is_uicc_present = false; if (device_property_present(dev, "ese-present")) { device_property_read_u8(dev, "ese-present", &tmp); tmp = phy->se_status.is_ese_present; } if (device_property_present(dev, "uicc-present")) { device_property_read_u8(dev, "uicc-present", &tmp); tmp = phy->se_status.is_uicc_present; } return 0; } static int st_nci_spi_of_request_resources(struct spi_device *dev) { struct st_nci_spi_phy *phy = spi_get_drvdata(dev); struct device_node *pp; int gpio; int r; pp = dev->dev.of_node; if (!pp) return -ENODEV; /* Get GPIO from device tree */ gpio = of_get_named_gpio(pp, "reset-gpios", 0); if (gpio < 0) { nfc_err(&dev->dev, "Failed to retrieve reset-gpios from device tree\n"); return gpio; } /* GPIO request and configuration */ r = devm_gpio_request_one(&dev->dev, gpio, GPIOF_OUT_INIT_HIGH, ST_NCI_GPIO_NAME_RESET); if (r) { nfc_err(&dev->dev, "Failed to request reset pin\n"); return r; } phy->gpio_reset = gpio; phy->irq_polarity = irq_get_trigger_type(dev->irq); phy->se_status.is_ese_present = of_property_read_bool(pp, "ese-present"); phy->se_status.is_uicc_present = of_property_read_bool(pp, "uicc-present"); return 0; } static int st_nci_spi_request_resources(struct spi_device *dev) { struct st_nci_nfc_platform_data *pdata; struct st_nci_spi_phy *phy = spi_get_drvdata(dev); int r; pdata = dev->dev.platform_data; if (pdata == NULL) { nfc_err(&dev->dev, "No platform data\n"); return -EINVAL; } /* store for later use */ phy->gpio_reset = pdata->gpio_reset; phy->irq_polarity = pdata->irq_polarity; r = devm_gpio_request_one(&dev->dev, phy->gpio_reset, GPIOF_OUT_INIT_HIGH, ST_NCI_GPIO_NAME_RESET); if (r) { pr_err("%s : reset gpio_request failed\n", __FILE__); return r; } phy->se_status.is_ese_present = pdata->is_ese_present; phy->se_status.is_uicc_present = pdata->is_uicc_present; return 0; } static int st_nci_spi_probe(struct spi_device *dev) { struct st_nci_spi_phy *phy; struct st_nci_nfc_platform_data *pdata; int r; dev_dbg(&dev->dev, "%s\n", __func__); dev_dbg(&dev->dev, "IRQ: %d\n", dev->irq); /* Check SPI platform functionnalities */ if (!dev) { pr_debug("%s: dev is NULL. Device is not accessible.\n", __func__); return -ENODEV; } phy = devm_kzalloc(&dev->dev, sizeof(struct st_nci_spi_phy), GFP_KERNEL); if (!phy) return -ENOMEM; phy->spi_dev = dev; spi_set_drvdata(dev, phy); pdata = dev->dev.platform_data; if (!pdata && dev->dev.of_node) { r = st_nci_spi_of_request_resources(dev); if (r) { nfc_err(&dev->dev, "No platform data\n"); return r; } } else if (pdata) { r = st_nci_spi_request_resources(dev); if (r) { nfc_err(&dev->dev, "Cannot get platform resources\n"); return r; } } else if (ACPI_HANDLE(&dev->dev)) { r = st_nci_spi_acpi_request_resources(dev); if (r) { nfc_err(&dev->dev, "Cannot get ACPI data\n"); return r; } } else { nfc_err(&dev->dev, "st_nci platform resources not available\n"); return -ENODEV; } r = ndlc_probe(phy, &spi_phy_ops, &dev->dev, ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM, &phy->ndlc, &phy->se_status); if (r < 0) { nfc_err(&dev->dev, "Unable to register ndlc layer\n"); return r; } phy->irq_active = true; r = devm_request_threaded_irq(&dev->dev, dev->irq, NULL, st_nci_irq_thread_fn, phy->irq_polarity | IRQF_ONESHOT, ST_NCI_SPI_DRIVER_NAME, phy); if (r < 0) nfc_err(&dev->dev, "Unable to register IRQ handler\n"); return r; } static int st_nci_spi_remove(struct spi_device *dev) { struct st_nci_spi_phy *phy = spi_get_drvdata(dev); dev_dbg(&dev->dev, "%s\n", __func__); ndlc_remove(phy->ndlc); return 0; } static struct spi_device_id st_nci_spi_id_table[] = { {ST_NCI_SPI_DRIVER_NAME, 0}, {} }; MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table); static const struct acpi_device_id st_nci_spi_acpi_match[] = { {"SMO2101", 0}, {} }; MODULE_DEVICE_TABLE(acpi, st_nci_spi_acpi_match); static const struct of_device_id of_st_nci_spi_match[] = { { .compatible = "st,st21nfcb-spi", }, {} }; MODULE_DEVICE_TABLE(of, of_st_nci_spi_match); static struct spi_driver st_nci_spi_driver = { .driver = { .name = ST_NCI_SPI_DRIVER_NAME, .of_match_table = of_match_ptr(of_st_nci_spi_match), .acpi_match_table = ACPI_PTR(st_nci_spi_acpi_match), }, .probe = st_nci_spi_probe, .id_table = st_nci_spi_id_table, .remove = st_nci_spi_remove, }; module_spi_driver(st_nci_spi_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION(DRIVER_DESC);