/* SPDX-License-Identifier: GPL-2.0 */ /****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * ******************************************************************************/ #ifndef __INC_HAL8188EPHYCFG_H__ #define __INC_HAL8188EPHYCFG_H__ /*--------------------------Define Parameters-------------------------------*/ #define LOOP_LIMIT 5 #define MAX_STALL_TIME 50 /* us */ #define AntennaDiversityValue 0x80 #define MAX_TXPWR_IDX_NMODE_92S 63 #define Reset_Cnt_Limit 3 #define IQK_MAC_REG_NUM 4 #define IQK_ADDA_REG_NUM 16 #define IQK_BB_REG_NUM 9 #define HP_THERMAL_NUM 8 #define MAX_AGGR_NUM 0x07 /*--------------------------Define Parameters-------------------------------*/ /*------------------------------Define structure----------------------------*/ enum sw_chnl_cmd_id { CmdID_End, CmdID_SetTxPowerLevel, CmdID_BBRegWrite10, CmdID_WritePortUlong, CmdID_WritePortUshort, CmdID_WritePortUchar, CmdID_RF_WriteReg, }; /* 1. Switch channel related */ struct sw_chnl_cmd { enum sw_chnl_cmd_id CmdID; u32 Para1; u32 Para2; u32 msDelay; }; enum hw90_block { HW90_BLOCK_MAC = 0, HW90_BLOCK_PHY0 = 1, HW90_BLOCK_PHY1 = 2, HW90_BLOCK_RF = 3, HW90_BLOCK_MAXIMUM = 4, /* Never use this */ }; enum rf_radio_path { RF_PATH_A = 0, /* Radio Path A */ RF_PATH_B = 1, /* Radio Path B */ }; #define MAX_PG_GROUP 13 #define RF_PATH_MAX 2 #define MAX_RF_PATH RF_PATH_MAX #define MAX_TX_COUNT 4 /* path numbers */ #define CHANNEL_MAX_NUMBER 14 /* 14 is the max chnl number */ #define MAX_CHNL_GROUP_24G 6 /* ch1~2, ch3~5, ch6~8, *ch9~11, ch12~13, CH 14 * total three groups */ #define CHANNEL_GROUP_MAX_88E 6 enum wireless_mode { WIRELESS_MODE_UNKNOWN = 0x00, WIRELESS_MODE_A = BIT(2), WIRELESS_MODE_B = BIT(0), WIRELESS_MODE_G = BIT(1), WIRELESS_MODE_AUTO = BIT(5), WIRELESS_MODE_N_24G = BIT(3), WIRELESS_MODE_N_5G = BIT(4), WIRELESS_MODE_AC = BIT(6) }; enum phy_rate_tx_offset_area { RA_OFFSET_LEGACY_OFDM1, RA_OFFSET_LEGACY_OFDM2, RA_OFFSET_HT_OFDM1, RA_OFFSET_HT_OFDM2, RA_OFFSET_HT_OFDM3, RA_OFFSET_HT_OFDM4, RA_OFFSET_HT_CCK, }; struct bb_reg_def { u32 rfintfs; /* set software control: */ /* 0x870~0x877[8 bytes] */ u32 rfintfi; /* readback data: */ /* 0x8e0~0x8e7[8 bytes] */ u32 rfintfo; /* output data: */ /* 0x860~0x86f [16 bytes] */ u32 rfintfe; /* output enable: */ /* 0x860~0x86f [16 bytes] */ u32 rf3wireOffset; /* LSSI data: */ /* 0x840~0x84f [16 bytes] */ u32 rfLSSI_Select; /* BB Band Select: */ /* 0x878~0x87f [8 bytes] */ u32 rfTxGainStage; /* Tx gain stage: */ /* 0x80c~0x80f [4 bytes] */ u32 rfHSSIPara1; /* wire parameter control1 : */ /* 0x820~0x823,0x828~0x82b, * 0x830~0x833, 0x838~0x83b [16 bytes] */ u32 rfHSSIPara2; /* wire parameter control2 : */ /* 0x824~0x827,0x82c~0x82f, 0x834~0x837, * 0x83c~0x83f [16 bytes] */ u32 rfSwitchControl; /* Tx Rx antenna control : */ /* 0x858~0x85f [16 bytes] */ u32 rfAGCControl1; /* AGC parameter control1 : */ /* 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, * 0xc68~0xc6b [16 bytes] */ u32 rfAGCControl2; /* AGC parameter control2 : */ /* 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, * 0xc6c~0xc6f [16 bytes] */ u32 rfRxIQImbalance; /* OFDM Rx IQ imbalance matrix : */ /* 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, * 0xc2c~0xc2f [16 bytes] */ u32 rfRxAFE; /* Rx IQ DC ofset and Rx digital filter, * Rx DC notch filter : */ /* 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, * 0xc28~0xc2b [16 bytes] */ u32 rfTxIQImbalance; /* OFDM Tx IQ imbalance matrix */ /* 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, * 0xc98~0xc9b [16 bytes] */ u32 rfTxAFE; /* Tx IQ DC Offset and Tx DFIR type */ /* 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, * 0xc9c~0xc9f [16 bytes] */ u32 rfLSSIReadBack; /* LSSI RF readback data SI mode */ /* 0x8a0~0x8af [16 bytes] */ u32 rfLSSIReadBackPi; /* LSSI RF readback data PI mode 0x8b8-8bc for * Path A and B */ }; /*------------------------------Define structure----------------------------*/ /*------------------------Export global variable----------------------------*/ /*------------------------Export global variable----------------------------*/ /*------------------------Export Marco Definition---------------------------*/ /*------------------------Export Marco Definition---------------------------*/ /*--------------------------Exported Function prototype---------------------*/ /* */ /* BB and RF register read/write */ /* */ /* Read initi reg value for tx power setting. */ void rtl8192c_PHY_GetHWRegOriginalValue(struct adapter *adapter); /* BB TX Power R/W */ void PHY_GetTxPowerLevel8188E(struct adapter *adapter, u32 *powerlevel); void PHY_ScanOperationBackup8188E(struct adapter *Adapter, u8 Operation); /* Call after initialization */ void ChkFwCmdIoDone(struct adapter *adapter); /* BB/MAC/RF other monitor API */ void PHY_SetRFPathSwitch_8188E(struct adapter *adapter, bool main); void PHY_SwitchEphyParameter(struct adapter *adapter); void PHY_EnableHostClkReq(struct adapter *adapter); bool SetAntennaConfig92C(struct adapter *adapter, u8 defaultant); /*--------------------------Exported Function prototype---------------------*/ #define PHY_SetMacReg PHY_SetBBReg #define SIC_HW_SUPPORT 0 #define SIC_MAX_POLL_CNT 5 #define SIC_CMD_READY 0 #define SIC_CMD_WRITE 1 #define SIC_CMD_READ 2 #define SIC_CMD_REG 0x1EB /* 1byte */ #define SIC_ADDR_REG 0x1E8 /* 1b9~1ba, 2 bytes */ #define SIC_DATA_REG 0x1EC /* 1bc~1bf */ #endif /* __INC_HAL8192CPHYCFG_H */