Age | Commit message (Collapse) | Author |
|
Related-to: ELB-4838
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
* Update copyright year
* Fix spelling
Related-to: ELB-4838
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
Convert the HDMI overlays to the new naming scheme. While at it do also
update copyright year.
Related-to: ELB-4838
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
Related-to: ELB-4838
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
Related-to: ELB-4838
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
Fix Verdin iMX8M Mini with OV5640 MIPI CSI camera. That regulator is
optional.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Add device tree overlay suitable to run CAN1 on older module HW samples.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Related-to: ELB-4599, ELB-4645
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
toradex_5.15-2.0.x-imx
Related-to: ELB-4599, ELB-4645
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Update the overlay against the changes in the kernel device tree.
Related-to: ELB-4599, ELB-4645
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Update the overlay against the changes in the kernel device tree.
Related-to: ELB-4599, ELB-4643
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
This commit corrects the indentation, adds a comment about the the
compatible chipname used to bind the spidev driver and removes the
redundant status variable.
Fixes: d929016d ("verdin-imx8mm: add spidev overlay")
Related-to: ELB-4652
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This commit corrects the indentation, adds a comment about the the
compatible chipname used to bind the spidev driver and removes the
redundant status variable.
Fixes: dc60a386 ("verdin-imx8mp: add spidev overlay")
Related-to: ELB-4652
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This commit changes the overlay for the DSI-to-HDMI adapter to make use
of the new driver: lontium,lt8912b
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
This commit suppresses compiler warnings about address-cells and
size-cells properties missing in spidev bloack
Fixes: d929016d ("verdin-imx8mm: add spidev overlay")
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This commit suppresses compiler warnings about address-cells and
size-cells properties missing in spidev block
Fixes: dc60a386 ("verdin-imx8mp: add spidev overlay")
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
With the 5.15 NXP kernel the clock/power/reset subsystem was
reworked. Follow the changed node names in the kernel.
Related-to: ELB-4599
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Currently these were enabled in the dtb, move this to the overlays
which might make use of the video processing unit VPU.
Related-to: ELB-4599
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
This overlay enables spidev by default.
Related-to: ELB-4652
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This overlay enables spidev by default.
Related-to: ELB-4652
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
Fix reset GPIO polarity in-line with the following upstream fix:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=feedaacdadfc332e1a6e436f3adfbc67e244db47
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
this commit adds an overlay which reserves memory for RPMSG
communication as well as the driver to communicate with the M4.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
Toradex 32bit machines are no longer supported on the downstream branch
so remove them and adjust the Makefile.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
Add a device tree overlay for resistive touch enablement.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Depending on the carrier board the full device tree either configures
the touscreen for use with the adapter or the dedicated connector.
Thus the overlay should not assume that the configuration is already
done for the connector pinout.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
The touchcontroller only uses the PWMs pins when using the pin out for
the adapter. For carrier boards with the dedicated connector the PWMs
can be used concurrently.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
This makes sure to use the correct pixelclock polarity.
Related-to: ELB-4568
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
Related-to: ELB-4380
Signed-off-by: Henrique Garcia <henrique.garcia@toradex.com>
|
|
To support RGB DAC on NAND modules without overlay support,
clocks are migrated directly to the kernel device tree.
Drop duplicated clock settings from overlays
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
The port@1 nodes don't need a reg property, delete it.
Compare with:
Documentation/devicetree/bindings/display/bridge/sec_dsim.txt
If there is one the full functionality is still there, but
drivers/gpu/drm/drm_mipi_dsi.c:163 assumes this to be a
subnode describing a dsi device which needs to be registered.
It then fails with:
imx_sec_dsim_drv 32e10000.mipi_dsi: modalias failure on /soc@0/bus@32c00000 mipi_dsi@32e10000/port@1
Related-to: ELB-4278
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Apalis iMX8X is no longer supported.
Drop overlays support for this target
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
Verdin iMX8M Mini DualLite does not have a can interface
which leads to the following message in the boot log.
[ 8.752956] mcp25xxfd spi2.0: CRC read error: computed: 6c2a received: ffff - data: be 00 04 ff ff ff ff
[ 8.782993] mcp25xxfd spi2.0: CRC read of clock register resulted in a bad CRC mismatch - hw not found
[ 8.863803] mcp25xxfd spi2.0: Probe failed, err=84
This overlay disables the CAN1 node to avoid error messages in dmesg.
Related-to: ELB-4187
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
Currently when booting with mezzanine overlay
backlight of the 10" LVDS display is off.
Fix LVDS_0_BKL1_ON and PWM_BKL1 signals.
LVDS_0_BKL1_ON available on GPIO1.22 set to 1.
PWM_BKL1 available on GPIO3.28 set to 0.
Related-to: ELB-4192
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
Define regulator for csi_1 camera overlay to
avoid warning messages during system start.
Related-to: ELB-4168
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
Use common naming conventions for all mezzanine overlays
- apalis-imx8_mezzanine_lvds_overlay.dts - LVDS 10"
- apalis-imx8_mezzanine_ov5640_overlay.dts - CSI_2 OV5640 camera
Related-to: ELB-2578
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
Enable flexcan3 interface. Keep CAN transceiver
Silent Mode OFF MXM Pin 193 (GPIO2_IO18) low.
Related-to: ELB-2578
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
Add following overlays:
- Parallel RGB/VGA support
- Atmel MXT TS for boards with Capacitive Touch Connector
- Atmel MXT TS for Capacitive Touch Adapter
- Fusion F0710A TS for boards with Capacitive Touch Connector
- Fusion F0710A TS for Capacitive Touch Adapter
- Toradex 7" touchscreen lt161010
- Toradex 10" touchscreen lt170410
- Toradex 7" resistive touchscreen ad7879
Related-to: ELB-4065
Related-to: ELB-4080
Signed-off-by: Oleksii Bidnichenko <oleksii.bidnichenko@toradex.com>
|
|
Add separate overlay for Apalis iMX8 Mezzanine
available on the evaluation board.
Mezzanine is using ldb1 for the LVDS lane,
configure lvds-channel appropriately
Related-to: ELB-2578
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
Remove wakeup-key node since it's no longer supported
in Apalis iMX8 DT. Drop pinctrl_gpio_keys pinmux as
already configured in the Apalis iMX8 device tree.
Related-to: ELB-2578
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
verdin-imx8mp_mezzanine-ov5640_overlay.dts:
Modify the regular overlay to work with the default jumpering of the
Mezzanine which uses the same GPIOs as the first camera interface CSI_1
and the same I2C bus as used for DSI display adapters! So, unless we
modify the OV5640 driver to cope with using them same GPIOs twice or
ignore absence of GPIOs this will not work for any concurrent dual
camera use case.
verdin-imx8mp_mezzanine-ov5640-2_overlay.dts:
Add a new overlay to work with an alternate jumpering of the Mezzanine
which uses the same Verdin GPIO2 as used for the Atmel MXT Touchscreen
and the same I2C bus as used for DSI display adapters! So, while this
can not concurrently used with our 10 inch capacitive LVDS touch screen
it does work fine for any concurrent dual camera use case.
While at it indicate GPIO usage of primary CSI_1 OV5640 overlay.
Related-to: ELB-4035
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
While at it actually use timings as per LG LP156WF1 datasheet.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Related-to: ELB-4035
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Related-to: ELB-4034
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
Related-to: ELB-4034
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
Related-to: ELB-4034
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
Related-to: ELB-4034
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
Explicitly specify parent clock to support
clock source for the VGA mode overlay
Related-to: ELB-4030
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
Add support of the MIPI CSI-2 serial camera OV5640.
Related-to: ELB-3883
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|