diff options
| author | Stefan Agner <stefan.agner@toradex.com> | 2017-05-01 11:25:13 -0700 |
|---|---|---|
| committer | Stefan Agner <stefan.agner@toradex.com> | 2017-05-01 11:25:13 -0700 |
| commit | acebb1dd18f01174edc21dfb310444d344bd4563 (patch) | |
| tree | 3a5c9b72a6a588d8f94f18c8040d07e340c8dafc | |
| parent | 6f0eaf1814e57d187acf57b3fed6561e26a8a21e (diff) | |
remove SABRE specific standby pin mux
The i.MX 7Dual SABRE board uses a GPIO which allows to pu the CAN
transceiver into standby mode. This pin is not used on Colibri
designs, hence remove the pin mux/GPIO configuration.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
| -rw-r--r-- | examples/imx7_colibri_m4/pin_mux.c | 15 |
1 files changed, 0 insertions, 15 deletions
diff --git a/examples/imx7_colibri_m4/pin_mux.c b/examples/imx7_colibri_m4/pin_mux.c index 3c2b733..f1d4b57 100644 --- a/examples/imx7_colibri_m4/pin_mux.c +++ b/examples/imx7_colibri_m4/pin_mux.c @@ -41,7 +41,6 @@ void configure_flexcan_pins(CAN_Type* base) { volatile GPIO_MemMapPtr gpio2_pdir; - void *addr; switch((uint32_t)base) { @@ -49,20 +48,6 @@ void configure_flexcan_pins(CAN_Type* base) /*CAN 1 is not used in SDB Board*/ break; case CAN2_BASE: - // CAN2_STB DRIVE LOW - /* R431 Connected */ - /* R435 not Connected */ - /* SDDO14 is floated (EPDC Expansion Slot J13)*/ - IOMUXC_SW_MUX_CTL_PAD_EPDC_DATA14 = IOMUXC_SW_MUX_CTL_PAD_EPDC_DATA14_MUX_MODE(5); // GPIO2[14] - IOMUXC_SW_PAD_CTL_PAD_EPDC_DATA14 = IOMUXC_SW_PAD_CTL_PAD_EPDC_DATA14_PE_MASK | - IOMUXC_SW_PAD_CTL_PAD_EPDC_DATA14_PS(3) | - IOMUXC_SW_PAD_CTL_PAD_EPDC_DATA14_DSE(0) | - IOMUXC_SW_PAD_CTL_PAD_EPDC_DATA14_HYS_MASK; - addr = (void *) GPIO2_BASE_PTR; - gpio2_pdir = addr; - gpio2_pdir->GDIR |= 0x00004000; - gpio2_pdir->DR &= ~(0x00004000); - // CAN2_TX IOMUXC_SW_MUX_CTL_PAD_GPIO1_IO15 = IOMUXC_SW_MUX_CTL_PAD_GPIO1_IO15_MUX_MODE(3); IOMUXC_SW_PAD_CTL_PAD_GPIO1_IO15 = IOMUXC_SW_PAD_CTL_PAD_GPIO1_IO15_PE_MASK | |