diff options
author | Philippe Schenker <philippe.schenker@toradex.com> | 2020-03-25 18:34:24 +0100 |
---|---|---|
committer | Marcel Ziswiler <marcel.ziswiler@toradex.com> | 2020-03-30 10:37:37 +0000 |
commit | 35c8f650b782bde57aec34f23f2b1e90224fe687 (patch) | |
tree | 505a6672dc5fabe89bb60c2b8f9aebb3b5a91524 | |
parent | 22256df96e710cf9ebeab8ba6d3dc14b3f76b047 (diff) |
net: phy: micrel.c: add rgmii interface delay possibility to ksz9131
The KSZ9131 provides DLL controlled delays on RXC and TXC lines. This
patch makes use of those delays. The information which delays should
be enabled or disabled comes from the interface names, documented in
ethernet-controller.yaml:
rgmii: Disable RXC and TXC delays
rgmii-id: Enable RXC and TXC delays
rgmii-txid: Enable only TXC delay, disable RXC delay
rgmii-rxid: Enable onlx RXC delay, disable TXC delay
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit bd734a742d5533fb9190ecd8cf25befc1f759a5b)
Replace phy_modify_mmd with phy_read_mmd and phy_write_mmd.
Related-to: ELB-2581
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
-rw-r--r-- | drivers/net/phy/micrel.c | 70 |
1 files changed, 70 insertions, 0 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 9c21508332dc..2c114bac90b7 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -646,6 +646,70 @@ static int ksz9131_of_load_skew_values(struct phy_device *phydev, return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval); } +#define KSZ9131RN_MMD_COMMON_CTRL_REG 2 +#define KSZ9131RN_RXC_DLL_CTRL 76 +#define KSZ9131RN_TXC_DLL_CTRL 77 +#define KSZ9131RN_DLL_CTRL_BYPASS BIT_MASK(12) +#define KSZ9131RN_DLL_ENABLE_DELAY 0 +#define KSZ9131RN_DLL_DISABLE_DELAY BIT(12) + +static int ksz9131_config_rgmii_delay(struct phy_device *phydev) +{ + u16 rxcdll_val, txcdll_val; + int new, ret; + + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + rxcdll_val = KSZ9131RN_DLL_DISABLE_DELAY; + txcdll_val = KSZ9131RN_DLL_DISABLE_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_ID: + rxcdll_val = KSZ9131RN_DLL_ENABLE_DELAY; + txcdll_val = KSZ9131RN_DLL_ENABLE_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + rxcdll_val = KSZ9131RN_DLL_ENABLE_DELAY; + txcdll_val = KSZ9131RN_DLL_DISABLE_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + rxcdll_val = KSZ9131RN_DLL_DISABLE_DELAY; + txcdll_val = KSZ9131RN_DLL_ENABLE_DELAY; + break; + default: + return 0; + } + + ret = phy_read_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG, + KSZ9131RN_RXC_DLL_CTRL); + if (ret < 0) + return ret; + + new = (ret & ~KSZ9131RN_DLL_CTRL_BYPASS) | rxcdll_val; + + if (new != ret) { + ret = phy_write_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG, + KSZ9131RN_RXC_DLL_CTRL, new); + if (ret < 0) + return ret; + } + + ret = phy_read_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG, + KSZ9131RN_TXC_DLL_CTRL); + if (ret < 0) + return ret; + + new = (ret & ~KSZ9131RN_DLL_CTRL_BYPASS) | txcdll_val; + + if (new != ret) { + ret = phy_write_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG, + KSZ9131RN_TXC_DLL_CTRL, new); + if (ret < 0) + return ret; + } + + return 0; +} + static int ksz9131_config_init(struct phy_device *phydev) { const struct device *dev = &phydev->mdio.dev; @@ -672,6 +736,12 @@ static int ksz9131_config_init(struct phy_device *phydev) if (!of_node) return 0; + if (phy_interface_is_rgmii(phydev)) { + ret = ksz9131_config_rgmii_delay(phydev); + if (ret < 0) + return ret; + } + ret = ksz9131_of_load_skew_values(phydev, of_node, MII_KSZ9031RN_CLK_PAD_SKEW, 5, clk_skews, 2); |