summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx51-babbage.dts
diff options
context:
space:
mode:
authorFabio Estevam <fabio.estevam@nxp.com>2018-07-03 10:05:54 -0300
committerShawn Guo <shawnguo@kernel.org>2018-07-03 21:45:57 +0800
commit82210bfd942b891c502afe471cda16eccf565ed5 (patch)
tree18b97f5195eb31b23b007f8072fa997dc999693c /arch/arm/boot/dts/imx51-babbage.dts
parentb97872d4eb226fa853d0f69c72b24a711e388757 (diff)
ARM: dts: imx51: Fix USB PHY duplicate unit-address
Currently the following DTC warnings are seen with W=1: arch/arm/boot/dts/imx51-babbage.dtb: Warning (unique_unit_address): /usbphy/usbphy@0: duplicate unit-address (also used in node /usbphy/usbh1phy@0) arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dtb: Warning (unique_unit_address): /usbphy/usbphy@0: duplicate unit-address (also used in node /usbphy/usbh1phy@0) Fix it by moving the USB PHY nodes outside of simple-bus and drop the unneeded unit-address, which matches the bindings documentation at Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt While at it rename the USB PHY node to usbphy1 for consistency. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/imx51-babbage.dts')
-rw-r--r--arch/arm/boot/dts/imx51-babbage.dts27
1 files changed, 10 insertions, 17 deletions
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 4fb0d4d480a8..a4a6d4a6b55b 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -170,22 +170,15 @@
mux-ext-port = <3>;
};
- usbphy {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "simple-bus";
-
- usbh1phy: usbh1phy@0 {
- compatible = "usb-nop-xceiv";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh1reg>;
- reg = <0>;
- clocks = <&clk_usb>;
- clock-names = "main_clk";
- reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
- vcc-supply = <&vusb_reg>;
- #phy-cells = <0>;
- };
+ usbphy1: usbphy1 {
+ compatible = "usb-nop-xceiv";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1reg>;
+ clocks = <&clk_usb>;
+ clock-names = "main_clk";
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vusb_reg>;
+ #phy-cells = <0>;
};
};
@@ -431,7 +424,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
vbus-supply = <&reg_hub_reset>;
- fsl,usbphy = <&usbh1phy>;
+ fsl,usbphy = <&usbphy1>;
phy_type = "ulpi";
status = "okay";
};