diff options
| author | Denys Drozdov <denys.drozdov@toradex.com> | 2021-03-02 13:36:08 +0200 |
|---|---|---|
| committer | Denys Drozdov <denys.drozdov@toradex.com> | 2021-03-04 10:48:20 +0200 |
| commit | acb4b349a03770e5016b6af9bc0b1c676766c947 (patch) | |
| tree | ec2f08e0dde70f993ef12b75d0c5f38f5ad55f7d /arch/arm/boot/dts/imx7-colibri.dtsi | |
| parent | c075abb318d598fa9d9aeb6f28c5db74f9263169 (diff) | |
ARM: dts: colibri-imx7: Restore TS nodes for NAND modules
Keep touchscreen and display nodes enabled for imx7 NAND modules,
since overlays for them are not supported yet.
For eMMC keep nodes disadled to apply overlays on it.
Related-to: ELB-3582
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Diffstat (limited to 'arch/arm/boot/dts/imx7-colibri.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx7-colibri.dtsi | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index ab8fa091adb8..69b8c9f1e638 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -14,7 +14,7 @@ default-brightness-level = <4>; enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>; - status = "disabled"; + status = "okay"; }; pxp_v4l2_out { @@ -349,7 +349,7 @@ adi,median-filter-size = /bits/ 8 <2>; adi,averaging = /bits/ 8 <1>; adi,conversion-interval = /bits/ 8 <255>; - status = "disabled"; + status = "okay"; }; pmic@33 { @@ -429,7 +429,7 @@ pinctrl-1 = <&pinctrl_i2c4_recovery>; scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - status = "disabled"; + status = "okay"; /* Atmel maxtouch controller */ atmel_mxt_ts: touchscreen@4a { @@ -440,7 +440,7 @@ interrupt-parent = <&gpio2>; interrupts = <15 IRQ_TYPE_EDGE_FALLING>; /* SODIMM_107, INT */ reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* SODIMM_106, RST */ - status = "disabled"; + status = "okay"; }; @@ -464,6 +464,7 @@ pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; display = <&display0>; + status = "okay"; display0: lcd-display { bits-per-pixel = <16>; |