Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Device-tree updates from Olof Johansson:
 "Besides new bindings and additional descriptions of hardware blocks
  for various SoCs and boards, the main new contents here is:

  SoCs:
   - Intel Agilex (SoCFPGA)
   - NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus)

  New boards:
   - Allwinner:
      + RerVision H3-DVK (H3)
      + Oceanic 5205 5inMFD (H6)
      + Beelink GS2 (H6)
      + Orange Pi 3 (H6)
   - Rockchip:
      + Orange Pi RK3399
      + Nanopi NEO4
      + Veyron-Mighty Chromebook variant
   - Amlogic:
      + SEI Robotics SEI510
   - ST Micro:
      + stm32mp157a discovery1
      + stm32mp157c discovery2
   - NXP:
      + Eckelmann ci4x10 (i.MX6DL)
      + i.MX8MM EVK (i.MX8MM)
      + ZII i.MX7 RPU2 (i.MX7)
      + ZII SPB4 (VF610)
      + Zii Ultra (i.MX8M)
      + TQ TQMa7S (i.MX7Solo)
      + TQ TQMa7D (i.MX7Dual)
      + Kobo Aura (i.MX50)
      + Menlosystems M53 (i.MX53)j
   - Nvidia:
      + Jetson Nano (Tegra T210)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits)
  arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge
  arm64: dts: bitmain: Add pinctrl support for BM1880 SoC
  arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board
  arm64: dts: bitmain: Add GPIO support for BM1880 SoC
  ARM: dts: gemini: Indent DIR-685 partition table
  dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
  ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
  arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
  arm64: dts: msm8998: thermal: Fix number of supported sensors
  arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
  arm64: dts: exynos: Move fixed-clocks out of soc
  arm64: dts: exynos: Move pmu and timer nodes out of soc
  ARM: dts: s5pv210: Fix camera clock provider on Goni board
  ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
  ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
  ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
  ARM: dts: exynos: Move pmu and timer nodes out of soc
  arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
  arm64: dts: db820c: Add sound card support
  arm64: dts: apq8096-db820c: Add HDMI display support
  ...

1 files changed, 52 insertions, 15 deletions

diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index ef653c3209bc..293576869546 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -5,6 +5,7 @@
 
 #include "rk3288.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/rockchip,rk808.h>
 
 / {
 	chosen {
@@ -61,6 +62,16 @@
 		};
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 RK808_CLKOUT1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		reset-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_LOW>,
+			<&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,format = "i2s";
@@ -338,6 +349,7 @@
 	status = "okay";
 
 	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vcc_18>;
 };
 
 &pinctrl {
@@ -352,68 +364,75 @@
 
 	backlight {
 		bl_en: bl-en {
-			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	buttons {
 		pwrbtn: pwrbtn {
-			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	eth_phy {
 		eth_phy_pwr: eth-phy-pwr {
-			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	pmic {
 		pmic_int: pmic-int {
-			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO \
 					&pcfg_pull_up>;
 		};
 
 		dvs_1: dvs-1 {
-			rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO \
 					&pcfg_pull_down>;
 		};
 
 		dvs_2: dvs-2 {
-			rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO \
 					&pcfg_pull_down>;
 		};
 	};
 
 	sdmmc {
 		sdmmc_bus4: sdmmc-bus4 {
-			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
-					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
-					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
-					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+			rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
+					<6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
+					<6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
+					<6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
 		};
 
 		sdmmc_clk: sdmmc-clk {
-			rockchip,pins = <6 20 RK_FUNC_1 \
+			rockchip,pins = <6 RK_PC4 1 \
 					&pcfg_pull_none_drv_8ma>;
 		};
 
 		sdmmc_cmd: sdmmc-cmd {
-			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
 		};
 
 		sdmmc_pwr: sdmmc-pwr {
-			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	usb {
 		host_vbus_drv: host-vbus-drv {
-			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		pwr_3g: pwr-3g {
-			rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <7 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };
@@ -440,6 +459,24 @@
 	vqmmc-supply = <&vccio_sd>;
 };
 
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_18>;
+	status = "okay";
+};
+
 &tsadc {
 	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
 	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */