diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2017-01-12 15:22:42 +0100 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2017-01-31 22:14:47 +0100 |
| commit | 6097c2d0afa4ff70ece8610875a0f0592064de29 (patch) | |
| tree | c82d205ea9839ac883d3207344ea3896b0a3cae2 /arch/arm/boot/dts/ste-href.dtsi | |
| parent | adef953bbc868b75ebe57eef10b396202c47639b (diff) | |
ARM: dts: Ux500: move USB PHY pins to PHY device
The physical pins from the SoC are in a sense belonging to the
PHY device (AB8500 USB) rather than the MUSB USB IP block.
The driver definately assumes so: before this change it
complains that it cannot control the pins it is using:
abx5x0-usb ab8500-usb.0: could not get/set default pinstate
After this patch the warning goes away.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/ste-href.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/ste-href.dtsi | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 1b59943ab6ec..865da0259963 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -19,12 +19,6 @@ }; soc { - usb_per5@a03e0000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; - }; - uart@80120000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_default_mode>; @@ -225,6 +219,12 @@ ab8500-gpio { }; + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; + }; + ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; |