diff options
Diffstat (limited to 'drivers/usb/core/hub.c')
-rw-r--r-- | drivers/usb/core/hub.c | 66 |
1 files changed, 48 insertions, 18 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 1e9a8c9aa531..ae9eb716c02f 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -124,6 +124,10 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev) int usb_device_supports_lpm(struct usb_device *udev) { + /* Some devices have trouble with LPM */ + if (udev->quirks & USB_QUIRK_NO_LPM) + return 0; + /* USB 2.1 (and greater) devices indicate LPM support through * their USB 2.0 Extended Capabilities BOS descriptor. */ @@ -1030,10 +1034,20 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) unsigned delay; /* Continue a partial initialization */ - if (type == HUB_INIT2) - goto init2; - if (type == HUB_INIT3) + if (type == HUB_INIT2 || type == HUB_INIT3) { + device_lock(hub->intfdev); + + /* Was the hub disconnected while we were waiting? */ + if (hub->disconnected) { + device_unlock(hub->intfdev); + kref_put(&hub->kref, hub_release); + return; + } + if (type == HUB_INIT2) + goto init2; goto init3; + } + kref_get(&hub->kref); /* The superspeed hub except for root hub has to use Hub Depth * value as an offset into the route string to locate the bits @@ -1231,6 +1245,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) queue_delayed_work(system_power_efficient_wq, &hub->init_work, msecs_to_jiffies(delay)); + device_unlock(hub->intfdev); return; /* Continues at init3: below */ } else { msleep(delay); @@ -1252,6 +1267,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Allow autosuspend if it was suppressed */ if (type <= HUB_INIT3) usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); + + if (type == HUB_INIT2 || type == HUB_INIT3) + device_unlock(hub->intfdev); + + kref_put(&hub->kref, hub_release); } /* Implement the continuations for the delays above */ @@ -4217,7 +4237,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, { struct usb_device *hdev = hub->hdev; struct usb_hcd *hcd = bus_to_hcd(hdev->bus); - int i, j, retval; + int retries, operations, retval, i; unsigned delay = HUB_SHORT_RESET_TIME; enum usb_device_speed oldspeed = udev->speed; const char *speed; @@ -4319,7 +4339,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, * first 8 bytes of the device descriptor to get the ep0 maxpacket * value. */ - for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) { + for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) { bool did_new_scheme = false; if (use_new_scheme(udev, retry_counter)) { @@ -4346,7 +4366,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, * 255 is for WUSB devices, we actually need to use * 512 (WUSB1.0[4.8.1]). */ - for (j = 0; j < 3; ++j) { + for (operations = 0; operations < 3; ++operations) { buf->bMaxPacketSize0 = 0; r = usb_control_msg(udev, usb_rcvaddr0pipe(), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, @@ -4366,7 +4386,13 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, r = -EPROTO; break; } - if (r == 0) + /* + * Some devices time out if they are powered on + * when already connected. They need a second + * reset. But only on the first attempt, + * lest we get into a time out/reset loop + */ + if (r == 0 || (r == -ETIMEDOUT && retries == 0)) break; } udev->descriptor.bMaxPacketSize0 = @@ -4398,7 +4424,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, * authorization will assign the final address. */ if (udev->wusb == 0) { - for (j = 0; j < SET_ADDRESS_TRIES; ++j) { + for (operations = 0; operations < SET_ADDRESS_TRIES; ++operations) { retval = hub_set_address(udev, devnum); if (retval >= 0) break; @@ -4493,6 +4519,8 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, goto fail; } + usb_detect_quirks(udev); + if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) { retval = usb_get_bos_descriptor(udev); if (!retval) { @@ -4691,7 +4719,6 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, if (status < 0) goto loop; - usb_detect_quirks(udev); if (udev->quirks & USB_QUIRK_DELAY_INIT) msleep(1000); @@ -5307,9 +5334,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev) if (udev->usb2_hw_lpm_enabled == 1) usb_set_usb2_hardware_lpm(udev, 0); - bos = udev->bos; - udev->bos = NULL; - /* Disable LPM and LTM while we reset the device and reinstall the alt * settings. Device-initiated LPM settings, and system exit latency * settings are cleared when the device is reset, so we have to set @@ -5318,15 +5342,17 @@ static int usb_reset_and_verify_device(struct usb_device *udev) ret = usb_unlocked_disable_lpm(udev); if (ret) { dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__); - goto re_enumerate; + goto re_enumerate_no_bos; } ret = usb_disable_ltm(udev); if (ret) { dev_err(&udev->dev, "%s Failed to disable LTM\n.", __func__); - goto re_enumerate; + goto re_enumerate_no_bos; } + bos = udev->bos; + for (i = 0; i < SET_CONFIG_TRIES; ++i) { /* ep0 maxpacket size may change; let the HCD know about it. @@ -5418,15 +5444,19 @@ done: usb_set_usb2_hardware_lpm(udev, 1); usb_unlocked_enable_lpm(udev); usb_enable_ltm(udev); - usb_release_bos_descriptor(udev); - udev->bos = bos; + /* release the new BOS descriptor allocated by hub_port_init() */ + if (udev->bos != bos) { + usb_release_bos_descriptor(udev); + udev->bos = bos; + } return 0; re_enumerate: - /* LPM state doesn't matter when we're about to destroy the device. */ - hub_port_logical_disconnect(parent_hub, port1); usb_release_bos_descriptor(udev); udev->bos = bos; +re_enumerate_no_bos: + /* LPM state doesn't matter when we're about to destroy the device. */ + hub_port_logical_disconnect(parent_hub, port1); return -ENODEV; } |