Age | Commit message (Collapse) | Author |
|
Capacitive TS controllers are parts of peripheral, not boards.
Move all related stuff from board-level to the main module DT.
Prepare the DTs for use with atmel mxt overlays, adding required pinmux
groups.
The common scheme of pin groups for atmel mxt ts:
pinctrl_atmel_conn - uses 107/106 pins for INT/Reset signals;
pinctrl_atmel_adap - uses 28/30 pins for INT/Reset signals.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The parallel RGB interface (lcd) and all related stuff turn
on in an overlay. Keep them disabled in the main devicetree.
As these subsystems are provided by module, move their definitions
into the module-level devicetree.
Related-to: ELB-3395
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
All Toradex Colibri family boards support the ecspi interface.
Move the definition of spidev0 to the module devicetree and enable
it by default.
Colibri Eval board has a CAN SPI controller. Disable the spidev0
for this board to have the CAN controller been enabled by default.
Related-to: ELB-3401
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
This commit unifys the backlight settings. All displays sold by Toradex
are now supporting 150Hz as a PWM backlight typical frequency.
Use this value for all SoM's and put also some better default values
for different brightness.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
(cherry picked from commit 0f2115c3c8934714e88a768ace4c324d08ac9039)
Conflicts:
arch/arm64/boot/dts/freescale/fsl-imx8qm-apalis.dts
arch/arm64/boot/dts/freescale/fsl-imx8qxp-colibri-aster.dts
arch/arm64/boot/dts/freescale/fsl-imx8qxp-colibri-eval-v3.dtsi
arch/arm64/boot/dts/freescale/fsl-imx8qxp-colibri-lvds-dual-eval-v3.dts
arch/arm64/boot/dts/freescale/fsl-imx8qxp-colibri-lvds-single-eval-v3.dts
arch/arm64/boot/dts/freescale/fsl-imx8qxp-colibri.dtsi
Do not apply this patch on imx8 dts, as I will pull them in separately
later on.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
In 4.14 devicetress are based on the mainline DT's and only necessary
stuff for downstream is put into those devicetrees.
This commit holds the changes for imx6*(colibri|apalis)* from 4.9.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
(cherry picked from commit 6466d65d1b4375ef009d58ed52428a5a0baa4ff9)
|
|
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
(cherry picked from commit fd067bd57fa6c7e01ea6d4f5f6ceae884aba9c21)
|