From 48622b7bde008387218a416586e9d072b385f1ae Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 1 Dec 2005 18:51:52 -0500 Subject: ieee1394: resume remote ports when starting a host (fixes device recognition) After initializing an IEEE 1394 host, broadcast a resume packet. This makes remote nodes visible which suspended their ports while the host was down. Such nodes had to be unplugged and replugged in order to be recognized. Motorola DCT6200 cable reciever was affected, probably other devices too. http://marc.theaimsgroup.com/?t=113202715800001 Signed-off-by: Stefan Richter Signed-off-by: Jody McIntyre (cherry picked from 14c0fa243b358c24040ff5f44b60c47aaf6430c3 commit) --- drivers/ieee1394/hosts.h | 1 + drivers/ieee1394/nodemgr.c | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/drivers/ieee1394/hosts.h b/drivers/ieee1394/hosts.h index 38f42112dff0..ae9b02cc013f 100644 --- a/drivers/ieee1394/hosts.h +++ b/drivers/ieee1394/hosts.h @@ -41,6 +41,7 @@ struct hpsb_host { /* this nodes state */ unsigned in_bus_reset:1; unsigned is_shutdown:1; + unsigned resume_packet_sent:1; /* this nodes' duties on the bus */ unsigned is_root:1; diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 7fff5a1d2ea4..f7c3dbaf5802 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -1413,6 +1413,24 @@ static void nodemgr_node_probe(struct host_info *hi, int generation) return; } +static int nodemgr_send_resume_packet(struct hpsb_host *host) +{ + struct hpsb_packet *packet; + int ret = 1; + + packet = hpsb_make_phypacket(host, + 0x003c0000 | NODEID_TO_NODE(host->node_id) << 24); + if (packet) { + packet->no_waiter = 1; + packet->generation = get_hpsb_generation(host); + ret = hpsb_send_packet(packet); + } + if (ret) + HPSB_WARN("fw-host%d: Failed to broadcast resume packet", + host->id); + return ret; +} + /* Because we are a 1394a-2000 compliant IRM, we need to inform all the other * nodes of the broadcast channel. (Really we're only setting the validity * bit). Other IRM responsibilities go in here as well. */ @@ -1463,6 +1481,13 @@ static int nodemgr_do_irm_duties(struct hpsb_host *host, int cycles) } } + /* Some devices suspend their ports while being connected to an inactive + * host adapter, i.e. if connected before the low-level driver is + * loaded. They become visible either when physically unplugged and + * replugged, or when receiving a resume packet. Send one once. */ + if (!host->resume_packet_sent && !nodemgr_send_resume_packet(host)) + host->resume_packet_sent = 1; + return 1; } -- cgit v1.2.3 From d51e86c18a479f1dbcef3aa20e58ad04d1233016 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 5 Dec 2005 16:28:59 -0500 Subject: ieee1394: write broadcast_channel only to select nodes (fixes device recognition) Some old 1394-1995 SBP-2 bridges would hang if they received a broadcast write request to BROADCAST_CHANNEL before the config ROM was read. Affected devices include Datafab MD2-FW2 2.5" HDD and SmartDisk VST FWCDRW-V8 portable CD writer. The write request is now directed to specific nodes instead of being broadcast to all nodes at once, and it is only performed if a previous read request at this register succeeded. Fixes an old interoperability problem which was perceived as a 2.6.14-specific regression: http://marc.theaimsgroup.com/?t=113190586800003 Signed-off-by: Stefan Richter Signed-off-by: Jody McIntyre (cherry picked from 61c7f775ca25ccfc0e51486103a724fb1a3a08f2 commit) --- drivers/ieee1394/nodemgr.c | 42 ++++++++++++++++++++++++++++++++---------- 1 file changed, 32 insertions(+), 10 deletions(-) diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index f7c3dbaf5802..0ea37b1bccb2 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -1349,6 +1349,33 @@ static void nodemgr_update_pdrv(struct node_entry *ne) } +/* Write the BROADCAST_CHANNEL as per IEEE1394a 8.3.2.3.11 and 8.4.2.3. This + * seems like an optional service but in the end it is practically mandatory + * as a consequence of these clauses. + * + * Note that we cannot do a broadcast write to all nodes at once because some + * pre-1394a devices would hang. */ +static void nodemgr_irm_write_bc(struct node_entry *ne, int generation) +{ + const u64 bc_addr = (CSR_REGISTER_BASE | CSR_BROADCAST_CHANNEL); + quadlet_t bc_remote, bc_local; + int ret; + + if (!ne->host->is_irm || ne->generation != generation || + ne->nodeid == ne->host->node_id) + return; + + bc_local = cpu_to_be32(ne->host->csr.broadcast_channel); + + /* Check if the register is implemented and 1394a compliant. */ + ret = hpsb_read(ne->host, ne->nodeid, generation, bc_addr, &bc_remote, + sizeof(bc_remote)); + if (!ret && bc_remote & cpu_to_be32(0x80000000) && + bc_remote != bc_local) + hpsb_node_write(ne, bc_addr, &bc_local, sizeof(bc_local)); +} + + static void nodemgr_probe_ne(struct host_info *hi, struct node_entry *ne, int generation) { struct device *dev; @@ -1360,6 +1387,8 @@ static void nodemgr_probe_ne(struct host_info *hi, struct node_entry *ne, int ge if (!dev) return; + nodemgr_irm_write_bc(ne, generation); + /* If "needs_probe", then this is either a new or changed node we * rescan totally. If the generation matches for an existing node * (one that existed prior to the bus reset) we send update calls @@ -1431,9 +1460,7 @@ static int nodemgr_send_resume_packet(struct hpsb_host *host) return ret; } -/* Because we are a 1394a-2000 compliant IRM, we need to inform all the other - * nodes of the broadcast channel. (Really we're only setting the validity - * bit). Other IRM responsibilities go in here as well. */ +/* Perform a few high-level IRM responsibilities. */ static int nodemgr_do_irm_duties(struct hpsb_host *host, int cycles) { quadlet_t bc; @@ -1442,13 +1469,8 @@ static int nodemgr_do_irm_duties(struct hpsb_host *host, int cycles) if (!host->is_irm || host->irm_id == (nodeid_t)-1) return 1; - host->csr.broadcast_channel |= 0x40000000; /* set validity bit */ - - bc = cpu_to_be32(host->csr.broadcast_channel); - - hpsb_write(host, LOCAL_BUS | ALL_NODES, get_hpsb_generation(host), - (CSR_REGISTER_BASE | CSR_BROADCAST_CHANNEL), - &bc, sizeof(quadlet_t)); + /* We are a 1394a-2000 compliant IRM. Set the validity bit. */ + host->csr.broadcast_channel |= 0x40000000; /* If there is no bus manager then we should set the root node's * force_root bit to promote bus stability per the 1394 -- cgit v1.2.3