From d2b91ab1480618885fe0a7f240b7e7710344a066 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Fri, 18 Jan 2019 14:31:13 +0100 Subject: ARM: dts: imx6*-apalis/-colibri: mark I2C recovery GPIOs as open drain Since commit d2d0ad2aec4a ("i2c: imx: use open drain for recovery GPIO") GPIO lib expects this GPIO to be configured as open drain. Make sure we define this GPIO as open drain in the device tree. This gets rid of the following warning: gpio-81 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file Note that currently the i.MX pinctrl driver does not support enabling open drain directly, so this patch has no effect in practice. Open drain is enabled by the fixed pinmux entry. Signed-off-by: Stefan Agner Reviewed-by: Philippe Schenker Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ull-colibri.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot/dts/imx6ull-colibri.dtsi') diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 6c63a7384611..9ad1da159768 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -94,16 +94,16 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; - sda-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &i2c2 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; - sda-gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; ad7879@2c { -- cgit v1.2.3