flash_blk/eth.scr: replace loadaddr by fdt_addr_r

Unfortunately as loadaddr is equal to fdt_addr_r on some modules and
equal to kernel_addr_r on others using it together with any of the
others may cause issues. Therefore no longer make use of loadaddr and
consistently use fdt_addr_r instead.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>

1 files changed, 6 insertions, 6 deletions

diff --git a/recipes-images/images/files/colibri-imx7/colibri-imx7_bin/flash_blk.scr b/recipes-images/images/files/colibri-imx7/colibri-imx7_bin/flash_blk.scr
index f1e73bb..9fa6296 100644
--- a/recipes-images/images/files/colibri-imx7/colibri-imx7_bin/flash_blk.scr
+++ b/recipes-images/images/files/colibri-imx7/colibri-imx7_bin/flash_blk.scr
@@ -1,5 +1,5 @@
 setenv create_bcb 'nand erase.part mx7-bcb && writebcb 80000 200000'
-setenv recreate_bcb 'nand read ${loadaddr} 0x800 0x800 && run create_bcb && nand write ${loadaddr} 0x800 0x800'
+setenv recreate_bcb 'nand read ${fdt_addr_r} 0x800 0x800 && run create_bcb && nand write ${fdt_addr_r} 0x800 0x800'
 
 # Migrate to UBI volume based boot schema
 setenv prepare_kernel_fdt 'ubi create kernel 0x800000 static && ubi create dtb 0x20000 static'
@@ -8,11 +8,11 @@ setenv prepare_rootfs 'ubi create rootfs 0 dynamic'
 setenv prepare_ubi 'ubi part ubi && if ubi check rootfs; then if ubi check kernel; then else ubi remove rootfs && run prepare_kernel_fdt && run prepare_m4firmware && run prepare_rootfs; fi; else run prepare_kernel_fdt && run prepare_m4firmware && run prepare_rootfs; fi'
 
 setenv upgrade_msg 'echo && echo "Upgraded U-Boot, please reset the board and complete update with" && echo "# run setupdate && run recreate_bcb && run update" && echo && echo "(note the recreate_bcb command in between!)"'
-setenv update_uboot_old 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/u-boot-nand.imx && nand erase.part u-boot && nand erase.part u-boot-env && writeboot ${loadaddr} 80000 200000 $filesize && nand erase.part u-boot-env && nand erase.part ubi && run upgrade_msg'
-setenv update_uboot 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/u-boot-nand.imx && nand erase.part u-boot1 && nand write ${loadaddr} u-boot1 ${filesize} && nand erase.part u-boot2 && nand write ${loadaddr} u-boot2 ${filesize}'
-setenv update_kernel 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/zImage && ubi write ${loadaddr} kernel ${filesize}'
-setenv update_fdt 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/${soc}-colibri-${fdt_board}.dtb && ubi write ${loadaddr} dtb ${filesize}'
-setenv update_rootfs 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/ubifs.img && ubi write ${loadaddr} rootfs ${filesize}'
+setenv update_uboot_old 'fatload ${interface} 0:1 ${fdt_addr_r} ${board_name}/u-boot-nand.imx && nand erase.part u-boot && nand erase.part u-boot-env && writeboot ${fdt_addr_r} 80000 200000 $filesize && nand erase.part u-boot-env && nand erase.part ubi && run upgrade_msg'
+setenv update_uboot 'fatload ${interface} 0:1 ${fdt_addr_r} ${board_name}/u-boot-nand.imx && nand erase.part u-boot1 && nand write ${fdt_addr_r} u-boot1 ${filesize} && nand erase.part u-boot2 && nand write ${fdt_addr_r} u-boot2 ${filesize}'
+setenv update_kernel 'fatload ${interface} 0:1 ${fdt_addr_r} ${board_name}/zImage && ubi write ${fdt_addr_r} kernel ${filesize}'
+setenv update_fdt 'fatload ${interface} 0:1 ${fdt_addr_r} ${board_name}/${soc}-colibri-${fdt_board}.dtb && ubi write ${fdt_addr_r} dtb ${filesize}'
+setenv update_rootfs 'fatload ${interface} 0:1 ${fdt_addr_r} ${board_name}/ubifs.img && ubi write ${fdt_addr_r} rootfs ${filesize}'
 
 # Test which version of U-Boot we are currently running on
 setenv update 'mtdparts default && env default -f updlevel && if test $updlevel -lt 1; then; run update_uboot_old; else; run update_uboot && run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs && reset; fi'