ppc4xx/fdt/flash: Change fdt_fixup_nor_flash_node() to not rely on cs size

This patch changes the behaviour of the fdt_fixup_nor_flash_node()
function. Now it doesn't patch the size of the "reg" property with the
chip-select size, but with the size returned from the new function
flash_get_bank_size(). This function will return per weak default the
flash size of the bank (bank = chip-select numer) detected by the flash
driver. If this does not fit your needs, this function may be overridden
by a board specific one.

For this the parameters needed to be changed. So I intentionally squashed
the PPC4xx stuff using this routine into this patch. Otherwise it would
not be git-bisectable anymore.

The board specific function for the AMCC/APM Ebony eval board is now
included in this patch version.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Detlev Zundel <dzu@denx.de>
Cc: Gerald Van Baren <vanbaren@cideas.com>
Cc: Wolfgang Denk <wd@denx.de>

5 files changed, 85 insertions, 17 deletions

diff --git a/arch/powerpc/cpu/ppc4xx/fdt.c b/arch/powerpc/cpu/ppc4xx/fdt.c
index 15a184b5c6..e99b2b03dc 100644
--- a/arch/powerpc/cpu/ppc4xx/fdt.c
+++ b/arch/powerpc/cpu/ppc4xx/fdt.c
@@ -59,14 +59,14 @@ void __ft_board_setup(void *blob, bd_t *bd)
 			*p++ = 0;
 			*p++ = bxcr & EBC_BXCR_BAS_MASK;
 			*p++ = EBC_BXCR_BANK_SIZE(bxcr);
+		}
+	}
+
 
 #ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
-			/* Try to update reg property in nor flash node too */
-			fdt_fixup_nor_flash_size(blob, i,
-						 EBC_BXCR_BANK_SIZE(bxcr));
+	/* Update reg property in all nor flash nodes too */
+	fdt_fixup_nor_flash_size(blob);
 #endif
-		}
-	}
 
 	/* Some 405 PPC's have EBC as direct PLB child in the dts */
 	if (fdt_path_offset(blob, ebc_path) < 0)
diff --git a/board/amcc/ebony/flash.c b/board/amcc/ebony/flash.c
index 8fe3ba1b8f..79d2c4c307 100644
--- a/board/amcc/ebony/flash.c
+++ b/board/amcc/ebony/flash.c
@@ -34,6 +34,7 @@
 #include <common.h>
 #include <ppc4xx.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 
 #undef DEBUG
 #ifdef DEBUG
@@ -71,6 +72,36 @@ static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
  */
 static ulong flash_get_size(vu_long * addr, flash_info_t * info);
 
+/*
+ * Override the weak default mapping function with a board specific one
+ */
+u32 flash_get_bank_size(int cs, int idx)
+{
+	u8 reg = in_8((void *)CONFIG_SYS_FPGA_BASE);
+
+	if ((reg & BOOT_SMALL_FLASH) && !(reg & FLASH_ONBD_N)) {
+		/*
+		 * cs0: small flash (512KiB)
+		 * cs2: 2 * big flash (2 * 2MiB)
+		 */
+		if (cs == 0)
+			return flash_info[2].size;
+		if (cs == 2)
+			return flash_info[0].size + flash_info[1].size;
+	} else {
+		/*
+		 * cs0: 2 * big flash (2 * 2MiB)
+		 * cs2: small flash (512KiB)
+		 */
+		if (cs == 0)
+			return flash_info[0].size + flash_info[1].size;
+		if (cs == 2)
+			return flash_info[2].size;
+	}
+
+	return 0;
+}
+
 unsigned long flash_init(void)
 {
 	unsigned long total_b = 0;
diff --git a/common/fdt_support.c b/common/fdt_support.c
index aef4fe23e0..6f32e3f68d 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -591,11 +591,30 @@ int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose) {
 
 #ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 /*
+ * Provide a weak default function to return the flash bank size.
+ * There might be multiple non-identical flash chips connected to one
+ * chip-select, so we need to pass an index as well.
+ */
+u32 __flash_get_bank_size(int cs, int idx)
+{
+	extern flash_info_t flash_info[];
+
+	/*
+	 * As default, a simple 1:1 mapping is provided. Boards with
+	 * a different mapping need to supply a board specific mapping
+	 * routine.
+	 */
+	return flash_info[cs].size;
+}
+u32 flash_get_bank_size(int cs, int idx)
+	__attribute__((weak, alias("__flash_get_bank_size")));
+
+/*
  * This function can be used to update the size in the "reg" property
- * of the NOR FLASH device nodes. This is necessary for boards with
+ * of all NOR FLASH device nodes. This is necessary for boards with
  * non-fixed NOR FLASH sizes.
  */
-int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size)
+int fdt_fixup_nor_flash_size(void *blob)
 {
 	char compat[][16] = { "cfi-flash", "jedec-flash" };
 	int off;
@@ -607,19 +626,31 @@ int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size)
 	for (i = 0; i < 2; i++) {
 		off = fdt_node_offset_by_compatible(blob, -1, compat[i]);
 		while (off != -FDT_ERR_NOTFOUND) {
+			int idx;
+
 			/*
-			 * Found one compatible node, now check if this one
-			 * has the correct CS
+			 * Found one compatible node, so fixup the size
+			 * int its reg properties
 			 */
 			prop = fdt_get_property_w(blob, off, "reg", &len);
 			if (prop) {
+				int tuple_size = 3 * sizeof(reg);
+
+				/*
+				 * There might be multiple reg-tuples,
+				 * so loop through them all
+				 */
+				len /= tuple_size;
 				reg = (u32 *)&prop->data[0];
-				if (reg[0] == cs) {
-					reg[2] = size;
+				for (idx = 0; idx < len; idx++) {
+					/*
+					 * Update size in reg property
+					 */
+					reg[2] = flash_get_bank_size(reg[0],
+								     idx);
 					fdt_setprop(blob, off, "reg", reg,
-						    3 * sizeof(u32));
-
-					return 0;
+						    tuple_size);
+					reg += tuple_size;
 				}
 			}
 
@@ -629,7 +660,7 @@ int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size)
 		}
 	}
 
-	return -1;
+	return 0;
 }
 #endif
 
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index bd3388f626..8b01c704fd 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -120,7 +120,13 @@
 #define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #else
-#define	CONFIG_SYS_NO_FLASH		1	/* No NOR on Acadia when NAND-booting	*/
+/*
+ * No NOR-flash on Acadia when NAND-booting. We need to undef the
+ * NOR device-tree fixup code as well, since flash_info is not defined
+ * in this case.
+ */
+#define	CONFIG_SYS_NO_FLASH		1
+#undef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 #endif
 
 #ifdef CONFIG_ENV_IS_IN_FLASH
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 871ef4524b..fd94929cef 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -79,7 +79,7 @@ void ft_pci_setup(void *blob, bd_t *bd);
 void set_working_fdt_addr(void *addr);
 int fdt_resize(void *blob);
 
-int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size);
+int fdt_fixup_nor_flash_size(void *blob);
 
 void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
 void fdt_del_node_and_alias(void *blob, const char *alias);