apalis-imx8: clean-up ethernet functionality

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>

1 files changed, 0 insertions, 78 deletions

diff --git a/board/toradex/apalis-imx8/apalis-imx8.c b/board/toradex/apalis-imx8/apalis-imx8.c
index 82a8a2972f..6e534a5bd1 100644
--- a/board/toradex/apalis-imx8/apalis-imx8.c
+++ b/board/toradex/apalis-imx8/apalis-imx8.c
@@ -5,7 +5,6 @@
 #include <common.h>
 #include <malloc.h>
 #include <errno.h>
-#include <netdev.h>
 #include <fsl_ifc.h>
 #include <fdt_support.h>
 #include <linux/libfdt.h>
@@ -38,13 +37,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define ESDHC_CLK_PAD_CTRL	((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) \
 						| (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
 
-
-#define ENET_INPUT_PAD_CTRL	((SC_PAD_CONFIG_OD_IN << PADRING_CONFIG_SHIFT) | (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) \
-						| (SC_PAD_28FDSOI_DSE_18V_10MA << PADRING_DSE_SHIFT) | (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
-
-#define ENET_NORMAL_PAD_CTRL	((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) \
-						| (SC_PAD_28FDSOI_DSE_18V_10MA << PADRING_DSE_SHIFT) | (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
-
 #define GPIO_PAD_CTRL	((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) \
 						| (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
 
@@ -240,76 +232,6 @@ static void board_gpio_init(void)
 }
 #endif
 
-#ifdef CONFIG_FEC_MXC
-#include <miiphy.h>
-
-#define ETH_RESET   IMX_GPIO_NR(1, 11)
-
-static iomux_cfg_t pad_enet0[] = {
-	SC_P_ENET0_RGMII_RX_CTL | MUX_PAD_CTRL(ENET_INPUT_PAD_CTRL),
-	SC_P_ENET0_RGMII_RXD0 | MUX_PAD_CTRL(ENET_INPUT_PAD_CTRL),
-	SC_P_ENET0_RGMII_RXD1 | MUX_PAD_CTRL(ENET_INPUT_PAD_CTRL),
-	SC_P_ENET0_RGMII_RXD2 | MUX_PAD_CTRL(ENET_INPUT_PAD_CTRL),
-	SC_P_ENET0_RGMII_RXD3 | MUX_PAD_CTRL(ENET_INPUT_PAD_CTRL),
-	SC_P_ENET0_RGMII_RXC | MUX_PAD_CTRL(ENET_INPUT_PAD_CTRL),
-	SC_P_ENET0_RGMII_TX_CTL | MUX_PAD_CTRL(ENET_NORMAL_PAD_CTRL),
-	SC_P_ENET0_RGMII_TXD0 | MUX_PAD_CTRL(ENET_NORMAL_PAD_CTRL),
-	SC_P_ENET0_RGMII_TXD1 | MUX_PAD_CTRL(ENET_NORMAL_PAD_CTRL),
-	SC_P_ENET0_RGMII_TXD2 | MUX_PAD_CTRL(ENET_NORMAL_PAD_CTRL),
-	SC_P_ENET0_RGMII_TXD3 | MUX_PAD_CTRL(ENET_NORMAL_PAD_CTRL),
-	SC_P_ENET0_RGMII_TXC | MUX_PAD_CTRL(ENET_NORMAL_PAD_CTRL),
-	SC_P_ENET0_REFCLK_125M_25M | MUX_MODE_ALT(3) | MUX_PAD_CTRL(GPIO_PAD_CTRL),
-
-	/* Shared MDIO */
-	SC_P_ENET0_MDC | MUX_PAD_CTRL(ENET_NORMAL_PAD_CTRL),
-	SC_P_ENET0_MDIO | MUX_PAD_CTRL(ENET_NORMAL_PAD_CTRL),
-
-	/*  Ethernet PHY reset */
-	SC_P_LVDS1_GPIO01 | MUX_MODE_ALT(3) | MUX_PAD_CTRL(GPIO_PAD_CTRL),
-};
-
-static void setup_iomux_fec(void)
-{
-	imx8_iomux_setup_multiple_pads(pad_enet0, ARRAY_SIZE(pad_enet0));
-}
-
-static void enet_device_phy_reset(void)
-{
-	gpio_request(ETH_RESET, "ETH_RESET#");
-	gpio_direction_output(ETH_RESET, 0);
-	mdelay(10);
-	gpio_set_value(ETH_RESET, 1);
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int ret;
-	struct power_domain pd;
-
-	if (!power_domain_lookup_name("conn_enet0", &pd))
-		power_domain_on(&pd);
-
-	setup_iomux_fec();
-
-	enet_device_phy_reset();
-
-	ret = fecmxc_initialize_multi(bis, CONFIG_FEC_ENET_DEV,
-		CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
-	if (ret)
-		printf("FEC1 MXC: %s:failed\n", __func__);
-
-	return ret;
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
-	if (phydev->drv->config)
-		phydev->drv->config(phydev);
-
-	return 0;
-}
-#endif
-
 int checkboard(void)
 {
 	puts("Board: Apalis iMX8\n");