diff options
123 files changed, 3023 insertions, 550 deletions
diff --git a/Licenses/README b/Licenses/README index 41961256a6..9f61192557 100644 --- a/Licenses/README +++ b/Licenses/README @@ -52,5 +52,5 @@ GNU Lesser General Public License v2.1 or later LGPL-2.1+ Y lgpl-2.1.txt http: eCos license version 2.0 eCos-2.0 eCos-2.0.txt http://www.gnu.org/licenses/ecos-license.html BSD 2-Clause License BSD-2-Clause Y bsd-2-clause.txt http://spdx.org/licenses/BSD-2-Clause BSD 3-clause "New" or "Revised" License BSD-3-Clause Y bsd-3-clause.txt http://spdx.org/licenses/BSD-3-Clause#licenseText -IBM PIBS (PowerPC Initialization and ibm-pibs ibm-pibs.txt +IBM PIBS (PowerPC Initialization and IBM-pibs ibm-pibs.txt Boot Software) license @@ -8,7 +8,7 @@ VERSION = 2013 PATCHLEVEL = 10 SUBLEVEL = -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else @@ -45,13 +45,13 @@ endif ######################################################################### # -# U-boot build supports producing a object files to the separate external +# U-boot build supports generating object files in a separate external # directory. Two use cases are supported: # # 1) Add O= to the make command line # 'make O=/tmp/build all' # -# 2) Set environement variable BUILD_DIR to point to the desired location +# 2) Set environment variable BUILD_DIR to point to the desired location # 'export BUILD_DIR=/tmp/build' # 'make' # @@ -59,7 +59,7 @@ endif # 'export BUILD_DIR=/tmp/build' # './MAKEALL' # -# Command line 'O=' setting overrides BUILD_DIR environent variable. +# Command line 'O=' setting overrides BUILD_DIR environment variable. # # When none of the above methods is used the local build is performed and # the object files are placed in the source directory. @@ -838,7 +838,7 @@ unconfig: sinclude $(obj).boards.depend $(obj).boards.depend: boards.cfg - @awk '(NF && $$1 !~ /^#/) { print $$7 ": " $$7 "_config; $$(MAKE) -d" }' $< > $@ + @awk '(NF && $$1 !~ /^#/) { print $$7 ": " $$7 "_config; $$(MAKE)" }' $< > $@ # # Functions to generate common board directory names @@ -152,9 +152,6 @@ Directory Hierarchy: /blackfin Files generic to Analog Devices Blackfin architecture /cpu CPU specific files /lib Architecture specific library files - /x86 Files generic to x86 architecture - /cpu CPU specific files - /lib Architecture specific library files /m68k Files generic to m68k architecture /cpu CPU specific files /mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs @@ -178,6 +175,9 @@ Directory Hierarchy: /nios2 Files generic to Altera NIOS2 architecture /cpu CPU specific files /lib Architecture specific library files + /openrisc Files generic to OpenRISC architecture + /cpu CPU specific files + /lib Architecture specific library files /powerpc Files generic to PowerPC architecture /cpu CPU specific files /74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs @@ -200,12 +200,16 @@ Directory Hierarchy: /leon2 Files specific to Gaisler LEON2 SPARC CPU /leon3 Files specific to Gaisler LEON3 SPARC CPU /lib Architecture specific library files + /x86 Files generic to x86 architecture + /cpu CPU specific files + /lib Architecture specific library files /api Machine/arch independent API for external apps /board Board dependent files /common Misc architecture independent functions /disk Code for disk drive partition handling /doc Documentation (don't expect too much) /drivers Commonly used device drivers +/dts Contains Makefile for building internal U-Boot fdt. /examples Example code for standalone applications, etc. /fs Filesystem code (cramfs, ext2, jffs2, etc.) /include Header Files @@ -215,7 +219,7 @@ Directory Hierarchy: /lzo Library files to support LZO decompression /net Networking code /post Power On Self Test -/rtc Real Time Clock drivers +/spl Secondary Program Loader framework /tools Tools to build S-Record or U-Boot images, etc. Software Configuration: @@ -1404,6 +1408,12 @@ The following options need to be configured: CONFIG_DFU_NAND This enables support for exposing NAND devices via DFU. + CONFIG_DFU_RAM + This enables support for exposing RAM via DFU. + Note: DFU spec refer to non-volatile memory usage, but + allow usages beyond the scope of spec - here RAM usage, + one that would help mostly the developer. + CONFIG_SYS_DFU_DATA_BUF_SIZE Dfu transfer uses a buffer before writing data to the raw storage device. Make the size (in bytes) of this buffer @@ -3359,7 +3369,7 @@ Configuration Settings: the Linux kernel; all data that must be processed by the Linux kernel (bd_info, boot arguments, FDT blob if used) must be put below this limit, unless "bootm_low" - enviroment variable is defined and non-zero. In such case + environment variable is defined and non-zero. In such case all data for the Linux kernel must be between "bootm_low" and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. The environment variable "bootm_mapsize" will override the value of @@ -3472,7 +3482,7 @@ Configuration Settings: - CONFIG_ENV_FLAGS_LIST_DEFAULT - CONFIG_ENV_FLAGS_LIST_STATIC - Enable validation of the values given to enviroment variables when + Enable validation of the values given to environment variables when calling env set. Variables can be restricted to only decimal, hexadecimal, or boolean. If CONFIG_CMD_NET is also defined, the variables can also be restricted to IP address or MAC address. diff --git a/arch/arm/cpu/arm926ejs/at91/eflash.c b/arch/arm/cpu/arm926ejs/at91/eflash.c index 3e21cdb2fd..3f39264289 100644 --- a/arch/arm/cpu/arm926ejs/at91/eflash.c +++ b/arch/arm/cpu/arm926ejs/at91/eflash.c @@ -28,7 +28,7 @@ * by u-Boot commands. * * Note: Redundant environment will not work in this flash since - * it does use partial page writes. Make sure the environent spans + * it does use partial page writes. Make sure the environment spans * whole pages! */ diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c index cde3172fe3..d4711c070c 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c @@ -302,7 +302,7 @@ int arch_cpu_init(void) /* * Configures the I/O voltage of the pads connected to Egigabit * Ethernet interface to 1.8V - * By defult it is set to 3.3V + * By default it is set to 3.3V */ reg = readl(KW_REG_MPP_OUT_DRV_REG); reg |= (1 << 7); diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c index e55e1c6602..51f0a6dff1 100644 --- a/arch/arm/cpu/armv7/at91/sama5d3_devices.c +++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c @@ -202,3 +202,15 @@ void at91_lcd_hw_init(void) at91_periph_clk_enable(ATMEL_ID_LCDC); } #endif + +#ifdef CONFIG_USB_GADGET_ATMEL_USBA +void at91_udp_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + /* Enable UPLL clock */ + writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); + /* Enable UDPHS clock */ + at91_periph_clk_enable(ATMEL_ID_UDPHS); +} +#endif diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 0cb1a61aa1..36fedd630c 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -282,6 +282,9 @@ static unsigned long exynos5_get_periph_rate(int peripheral) src = readl(&clk->src_peric0); div = readl(&clk->div_peric3); break; + case PERIPH_ID_I2S0: + src = readl(&clk->src_mau); + div = readl(&clk->div_mau); case PERIPH_ID_SPI0: case PERIPH_ID_SPI1: src = readl(&clk->src_peric1); @@ -1146,17 +1149,29 @@ int exynos5_set_epll_clk(unsigned long rate) return 0; } -void exynos5_set_i2s_clk_source(void) +int exynos5_set_i2s_clk_source(unsigned int i2s_id) { struct exynos5_clock *clk = (struct exynos5_clock *)samsung_get_base_clock(); - - clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK, - (CLK_SRC_SCLK_EPLL)); + unsigned int *audio_ass = (unsigned int *)samsung_get_base_audio_ass(); + + if (i2s_id == 0) { + setbits_le32(&clk->src_top2, CLK_SRC_MOUT_EPLL); + clrsetbits_le32(&clk->src_mau, AUDIO0_SEL_MASK, + (CLK_SRC_SCLK_EPLL)); + setbits_le32(audio_ass, AUDIO_CLKMUX_ASS); + } else if (i2s_id == 1) { + clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK, + (CLK_SRC_SCLK_EPLL)); + } else { + return -1; + } + return 0; } int exynos5_set_i2s_clk_prescaler(unsigned int src_frq, - unsigned int dst_frq) + unsigned int dst_frq, + unsigned int i2s_id) { struct exynos5_clock *clk = (struct exynos5_clock *)samsung_get_base_clock(); @@ -1169,13 +1184,27 @@ int exynos5_set_i2s_clk_prescaler(unsigned int src_frq, } div = (src_frq / dst_frq); - if (div > AUDIO_1_RATIO_MASK) { - debug("%s: Frequency ratio is out of range\n", __func__); - debug("src frq = %d des frq = %d ", src_frq, dst_frq); + if (i2s_id == 0) { + if (div > AUDIO_0_RATIO_MASK) { + debug("%s: Frequency ratio is out of range\n", + __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + clrsetbits_le32(&clk->div_mau, AUDIO_0_RATIO_MASK, + (div & AUDIO_0_RATIO_MASK)); + } else if(i2s_id == 1) { + if (div > AUDIO_1_RATIO_MASK) { + debug("%s: Frequency ratio is out of range\n", + __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK, + (div & AUDIO_1_RATIO_MASK)); + } else { return -1; } - clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK, - (div & AUDIO_1_RATIO_MASK)); return 0; } @@ -1415,19 +1444,21 @@ int set_spi_clk(int periph_id, unsigned int rate) return 0; } -int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq) +int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq, + unsigned int i2s_id) { - if (cpu_is_exynos5()) - return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq); + return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq, i2s_id); else return 0; } -void set_i2s_clk_source(void) +int set_i2s_clk_source(unsigned int i2s_id) { if (cpu_is_exynos5()) - exynos5_set_i2s_clk_source(); + return exynos5_set_i2s_clk_source(i2s_id); + else + return 0; } int set_epll_clk(unsigned long rate) diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 1b05ebfd7a..8002bce79c 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -220,10 +220,20 @@ static void exynos5_i2s_config(int peripheral) { int i; struct exynos5_gpio_part1 *gpio1 = - (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + (struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1(); + struct exynos5_gpio_part4 *gpio4 = + (struct exynos5_gpio_part4 *)samsung_get_base_gpio_part4(); - for (i = 0; i < 5; i++) - s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02)); + switch (peripheral) { + case PERIPH_ID_I2S0: + for (i = 0; i < 5; i++) + s5p_gpio_cfg_pin(&gpio4->z, i, GPIO_FUNC(0x02)); + break; + case PERIPH_ID_I2S1: + for (i = 0; i < 5; i++) + s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02)); + break; + } } void exynos5_spi_config(int peripheral) @@ -296,6 +306,7 @@ static int exynos5_pinmux_config(int peripheral, int flags) case PERIPH_ID_I2C7: exynos5_i2c_config(peripheral, flags); break; + case PERIPH_ID_I2S0: case PERIPH_ID_I2S1: exynos5_i2s_config(peripheral); break; @@ -463,11 +474,11 @@ static int exynos4_pinmux_config(int peripheral, int flags) int exynos_pinmux_config(int peripheral, int flags) { - if (cpu_is_exynos5()) + if (cpu_is_exynos5()) { return exynos5_pinmux_config(peripheral, flags); - else if (cpu_is_exynos4()) + } else if (cpu_is_exynos4()) { return exynos4_pinmux_config(peripheral, flags); - else { + } else { debug("pinmux functionality not supported\n"); return -1; } diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi index 4fff5e3694..1c5474f40b 100644 --- a/arch/arm/dts/exynos5250.dtsi +++ b/arch/arm/dts/exynos5250.dtsi @@ -93,9 +93,28 @@ interrupts = <0 63 0>; }; + sound@3830000 { + compatible = "samsung,exynos-sound"; + reg = <0x3830000 0x50>; + samsung,i2s-epll-clock-frequency = <192000000>; + samsung,i2s-sampling-rate = <48000>; + samsung,i2s-bits-per-sample = <16>; + samsung,i2s-channels = <2>; + samsung,i2s-lr-clk-framesize = <256>; + samsung,i2s-bit-clk-framesize = <32>; + samsung,i2s-id = <0>; + }; + sound@12d60000 { compatible = "samsung,exynos-sound"; reg = <0x12d60000 0x20>; + samsung,i2s-epll-clock-frequency = <192000000>; + samsung,i2s-sampling-rate = <48000>; + samsung,i2s-bits-per-sample = <16>; + samsung,i2s-channels = <2>; + samsung,i2s-lr-clk-framesize = <256>; + samsung,i2s-bit-clk-framesize = <32>; + samsung,i2s-id = <1>; }; spi@12d20000 { diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h index 9f54fddce5..abcb97d107 100644 --- a/arch/arm/include/asm/arch-at91/at91_common.h +++ b/arch/arm/include/asm/arch-at91/at91_common.h @@ -19,6 +19,7 @@ void at91_serial2_hw_init(void); void at91_seriald_hw_init(void); void at91_spi0_hw_init(unsigned long cs_mask); void at91_spi1_hw_init(unsigned long cs_mask); +void at91_udp_hw_init(void); void at91_uhp_hw_init(void); void at91_lcd_hw_init(void); diff --git a/arch/arm/include/asm/arch-at91/atmel_usba_udc.h b/arch/arm/include/asm/arch-at91/atmel_usba_udc.h new file mode 100644 index 0000000000..6f540d23af --- /dev/null +++ b/arch/arm/include/asm/arch-at91/atmel_usba_udc.h @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2005-2013 Atmel Corporation + * Bo Shen <voice.shen@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ATMEL_USBA_UDC_H__ +#define __ATMEL_USBA_UDC_H__ + +#include <linux/usb/atmel_usba_udc.h> + +#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \ + [idx] = { \ + .name = nam, \ + .index = idx, \ + .fifo_size = maxpkt, \ + .nr_banks = maxbk, \ + .can_dma = dma, \ + .can_isoc = isoc, \ + } + +#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \ + defined(CONFIG_AT91SAM9X5) +static struct usba_ep_data usba_udc_ep[] = { + EP("ep0", 0, 64, 1, 0, 0), + EP("ep1", 1, 1024, 2, 1, 1), + EP("ep2", 2, 1024, 2, 1, 1), + EP("ep3", 3, 1024, 3, 1, 0), + EP("ep4", 4, 1024, 3, 1, 0), + EP("ep5", 5, 1024, 3, 1, 1), + EP("ep6", 6, 1024, 3, 1, 1), +}; +#elif defined(CONFIG_SAMA5D3) +static struct usba_ep_data usba_udc_ep[] = { + EP("ep0", 0, 64, 1, 0, 0), + EP("ep1", 1, 1024, 3, 1, 0), + EP("ep2", 2, 1024, 3, 1, 0), + EP("ep3", 3, 1024, 2, 1, 0), + EP("ep4", 4, 1024, 2, 1, 0), + EP("ep5", 5, 1024, 2, 1, 0), + EP("ep6", 6, 1024, 2, 1, 0), + EP("ep7", 7, 1024, 2, 1, 0), + EP("ep8", 8, 1024, 2, 0, 0), + EP("ep9", 9, 1024, 2, 0, 0), + EP("ep10", 10, 1024, 2, 0, 0), + EP("ep11", 11, 1024, 2, 0, 0), + EP("ep12", 12, 1024, 2, 0, 0), + EP("ep13", 13, 1024, 2, 0, 0), + EP("ep14", 14, 1024, 2, 0, 0), + EP("ep15", 15, 1024, 2, 0, 0), +}; +#else +# error "NO usba_udc_ep defined" +#endif + +#undef EP + +struct usba_platform_data pdata = { + .num_ep = ARRAY_SIZE(usba_udc_ep), + .ep = usba_udc_ep, +}; + +#endif diff --git a/arch/arm/include/asm/arch-at91/sama5d3.h b/arch/arm/include/asm/arch-at91/sama5d3.h index fefee5ed25..123a627cca 100644 --- a/arch/arm/include/asm/arch-at91/sama5d3.h +++ b/arch/arm/include/asm/arch-at91/sama5d3.h @@ -120,7 +120,7 @@ #define ATMEL_BASE_USART3 0xf8024000 #define ATMEL_BASE_UART1 0xf8028000 #define ATMEL_BASE_EMAC 0xf802c000 -#define ATMEL_BASE_UDHPS 0xf8030000 +#define ATMEL_BASE_UDPHS 0xf8030000 #define ATMEL_BASE_SHA 0xf8034000 #define ATMEL_BASE_AES 0xf8038000 #define ATMEL_BASE_TDES 0xf803c000 diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index 71075bd533..1d6fa9370f 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -31,8 +31,9 @@ void set_mmc_clk(int dev_index, unsigned int div); unsigned long get_lcd_clk(void); void set_lcd_clk(void); void set_mipi_clk(void); -void set_i2s_clk_source(void); -int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq); +int set_i2s_clk_source(unsigned int i2s_id); +int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq, + unsigned int i2s_id); int set_epll_clk(unsigned long rate); int set_spi_clk(int periph_id, unsigned int rate); diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h index 2b97b9a042..cf26eeffcf 100644 --- a/arch/arm/include/asm/arch-exynos/clock.h +++ b/arch/arm/include/asm/arch-exynos/clock.h @@ -876,8 +876,12 @@ struct set_epll_con_val { #define AUDIO_0_RATIO_MASK 0x0f #define AUDIO_1_RATIO_MASK 0x0f +#define AUDIO0_SEL_MASK 0xf #define AUDIO1_SEL_MASK 0xf + #define CLK_SRC_SCLK_EPLL 0x7 +#define CLK_SRC_MOUT_EPLL (1<<12) +#define AUDIO_CLKMUX_ASS (1<<0) /* CON0 bit-fields */ #define EPLL_CON0_MDIV_MASK 0x1ff diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index cb924fba8b..4b67191c07 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -50,6 +50,7 @@ #define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_ACE_SFR_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_DMC_PHY_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4_AUDIOSS_BASE DEVICE_NOT_AVAILABLE /* EXYNOS4X12 */ #define EXYNOS4X12_GPIO_PART3_BASE 0x03860000 @@ -85,10 +86,12 @@ #define EXYNOS4X12_SPI_ISP_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4X12_ACE_SFR_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4X12_DMC_PHY_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_AUDIOSS_BASE DEVICE_NOT_AVAILABLE /* EXYNOS5 Common*/ #define EXYNOS5_I2C_SPACING 0x10000 +#define EXYNOS5_AUDIOSS_BASE 0x03810000 #define EXYNOS5_GPIO_PART4_BASE 0x03860000 #define EXYNOS5_PRO_ID 0x10000000 #define EXYNOS5_CLOCK_BASE 0x10010000 @@ -226,6 +229,7 @@ SAMSUNG_BASE(spi_isp, SPI_ISP_BASE) SAMSUNG_BASE(tzpc, TZPC_BASE) SAMSUNG_BASE(dmc_ctrl, DMC_CTRL_BASE) SAMSUNG_BASE(dmc_phy, DMC_PHY_BASE) +SAMSUNG_BASE(audio_ass, AUDIOSS_BASE) #endif #endif /* _EXYNOS4_CPU_H */ diff --git a/arch/arm/include/asm/arch-exynos/i2s-regs.h b/arch/arm/include/asm/arch-exynos/i2s-regs.h index 613b9b7a37..4a4a7a00b7 100644 --- a/arch/arm/include/asm/arch-exynos/i2s-regs.h +++ b/arch/arm/include/asm/arch-exynos/i2s-regs.h @@ -8,10 +8,12 @@ #ifndef __I2S_REGS_H__ #define __I2S_REGS_H__ +#define CON_RESET (1 << 31) #define CON_TXFIFO_FULL (1 << 8) #define CON_TXCH_PAUSE (1 << 4) #define CON_ACTIVE (1 << 0) +#define MOD_OP_CLK (3 << 30) #define MOD_BLCP_SHIFT 24 #define MOD_BLCP_16BIT (0 << MOD_BLCP_SHIFT) #define MOD_BLCP_8BIT (1 << MOD_BLCP_SHIFT) @@ -24,6 +26,7 @@ #define MOD_BLC_MASK (3 << 13) #define MOD_SLAVE (1 << 11) +#define MOD_RCLKSRC (0 << 10) #define MOD_MASK (3 << 8) #define MOD_LR_LLOW (0 << 7) #define MOD_LR_RLOW (1 << 7) @@ -47,4 +50,7 @@ #define FIC_TXFLUSH (1 << 15) #define FIC_RXFLUSH (1 << 7) +#define PSREN (1 << 15) +#define PSVAL (3 << 8) + #endif /* __I2S_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h index 9952155986..64bd8b7c91 100644 --- a/arch/arm/include/asm/arch-exynos/periph.h +++ b/arch/arm/include/asm/arch-exynos/periph.h @@ -34,6 +34,7 @@ enum periph_id { PERIPH_ID_SDMMC1, PERIPH_ID_SDMMC2, PERIPH_ID_SDMMC3, + PERIPH_ID_I2S0 = 98, PERIPH_ID_I2S1 = 99, /* Since following peripherals do diff --git a/arch/arm/include/asm/arch-omap5/ehci.h b/arch/arm/include/asm/arch-omap5/ehci.h index 3921e4ab40..63aaa020d2 100644 --- a/arch/arm/include/asm/arch-omap5/ehci.h +++ b/arch/arm/include/asm/arch-omap5/ehci.h @@ -2,20 +2,7 @@ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com* * Author: Govindraj R <govindraj.raja@ti.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _EHCI_H diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index eea264b151..c441bd2f54 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -252,6 +252,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_A005812 puts("Work-around for Erratum A-005812 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005125 + puts("Work-around for Erratum A005125 enabled\n"); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447 if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) || (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV)) diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index ad57a9cfa7..be4f4ae870 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -108,6 +108,14 @@ _start_e500: isync 2: #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005125 + msync + isync + mfspr r3, SPRN_HDBCR0 + oris r3, r3, 0x0080 + mtspr SPRN_HDBCR0, r3 +#endif + #if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_E500MC) /* ISBC uses L2 as stack. diff --git a/arch/powerpc/cpu/ppc4xx/4xx_pci.c b/arch/powerpc/cpu/ppc4xx/4xx_pci.c index 5584e0f3e8..08781a1fb9 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_pci.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_pci.c @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs * * File Name: 405gp_pci.c * diff --git a/arch/powerpc/cpu/ppc4xx/4xx_uart.c b/arch/powerpc/cpu/ppc4xx/4xx_uart.c index 50c28a0d39..c02058f79b 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_uart.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_uart.c @@ -5,7 +5,7 @@ * (C) Copyright 2010 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ #include <common.h> diff --git a/arch/powerpc/cpu/ppc4xx/miiphy.c b/arch/powerpc/cpu/ppc4xx/miiphy.c index e4a9db6767..10147de089 100644 --- a/arch/powerpc/cpu/ppc4xx/miiphy.c +++ b/arch/powerpc/cpu/ppc4xx/miiphy.c @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ /*-----------------------------------------------------------------------------+ | diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index d9d8cbffaa..38bbc5a9bc 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -6,7 +6,7 @@ * Copyright (c) 2008 Nuovation System Designs, LLC * Grant Erickson <gerickson@nuovations.com> * - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ /* diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 15e44de41e..bec8966fde 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -34,6 +34,7 @@ #define CONFIG_SYS_PPC_E500_DEBUG_TLB 1 #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #elif defined(CONFIG_MPC8540) #define CONFIG_MAX_CPUS 1 @@ -52,6 +53,7 @@ #define CONFIG_SYS_PPC_E500_DEBUG_TLB 0 #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #elif defined(CONFIG_MPC8548) #define CONFIG_MAX_CPUS 1 @@ -67,6 +69,7 @@ #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #define CONFIG_SYS_FSL_RMU #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 #define CONFIG_SYS_FSL_A004447_SVR_REV 0x00 @@ -108,6 +111,7 @@ #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #define CONFIG_SYS_FSL_RMU #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #elif defined(CONFIG_MPC8572) #define CONFIG_MAX_CPUS 2 @@ -117,6 +121,7 @@ #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_DDR_115 #define CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #elif defined(CONFIG_P1010) #define CONFIG_MAX_CPUS 1 @@ -135,6 +140,7 @@ #define CONFIG_SYS_FSL_ERRATUM_P1010_A003549 #define CONFIG_SYS_FSL_ERRATUM_SEC_A003571 #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 #define CONFIG_SYS_FSL_A004447_SVR_REV 0x10 @@ -149,6 +155,7 @@ #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_A005125 /* P1012 is single core version of P1021 */ #elif defined(CONFIG_P1012) @@ -164,6 +171,7 @@ #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 +#define CONFIG_SYS_FSL_ERRATUM_A005125 /* P1013 is single core version of P1022 */ #elif defined(CONFIG_P1013) @@ -176,6 +184,7 @@ #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_FSL_SATA_ERRATUM_A001 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #elif defined(CONFIG_P1014) #define CONFIG_MAX_CPUS 1 @@ -205,6 +214,7 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x10000 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #elif defined(CONFIG_P1020) #define CONFIG_MAX_CPUS 2 @@ -216,6 +226,7 @@ #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #elif defined(CONFIG_P1021) #define CONFIG_MAX_CPUS 2 @@ -230,6 +241,7 @@ #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #elif defined(CONFIG_P1022) #define CONFIG_MAX_CPUS 2 @@ -241,6 +253,7 @@ #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_FSL_SATA_ERRATUM_A001 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #elif defined(CONFIG_P1023) #define CONFIG_MAX_CPUS 2 @@ -254,6 +267,7 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x10000 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 #define CONFIG_SYS_FSL_A004447_SVR_REV 0x11 @@ -268,6 +282,7 @@ #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_A005125 /* P1025 is lower end variant of P1021 */ #elif defined(CONFIG_P1025) @@ -283,6 +298,7 @@ #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 +#define CONFIG_SYS_FSL_ERRATUM_A005125 /* P2010 is single core version of P2020 */ #elif defined(CONFIG_P2010) @@ -293,6 +309,7 @@ #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #elif defined(CONFIG_P2020) #define CONFIG_MAX_CPUS 2 @@ -307,6 +324,7 @@ #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #define CONFIG_SYS_FSL_RMU #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #elif defined(CONFIG_PPC_P2041) /* also supports P2040 */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 @@ -506,6 +524,7 @@ #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_NAND_FSL_IFC #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #elif defined(CONFIG_BSC9132) #define CONFIG_MAX_CPUS 2 @@ -525,6 +544,7 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" +#define CONFIG_SYS_FSL_ERRATUM_A005125 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 #define CONFIG_SYS_FSL_A004447_SVR_REV 0x11 @@ -658,6 +678,7 @@ #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 +#define CONFIG_SYS_FSL_ERRATUM_A005125 #else #error Processor type not defined for this platform diff --git a/arch/powerpc/include/asm/ppc405.h b/arch/powerpc/include/asm/ppc405.h index 8bb342b929..f2ed16a216 100644 --- a/arch/powerpc/include/asm/ppc405.h +++ b/arch/powerpc/include/asm/ppc405.h @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ #ifndef __PPC405_H__ diff --git a/arch/powerpc/include/asm/ppc440.h b/arch/powerpc/include/asm/ppc440.h index 0f5bc8d1c7..0cfa88bff5 100644 --- a/arch/powerpc/include/asm/ppc440.h +++ b/arch/powerpc/include/asm/ppc440.h @@ -9,7 +9,7 @@ * (C) Copyright 2010 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ #ifndef __PPC440_H__ diff --git a/arch/powerpc/include/asm/ppc4xx-emac.h b/arch/powerpc/include/asm/ppc4xx-emac.h index e6eb332220..76fa95ca37 100644 --- a/arch/powerpc/include/asm/ppc4xx-emac.h +++ b/arch/powerpc/include/asm/ppc4xx-emac.h @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ /*----------------------------------------------------------------------------+ | diff --git a/arch/powerpc/include/asm/ppc4xx-mal.h b/arch/powerpc/include/asm/ppc4xx-mal.h index d15290dc1a..ef8b174461 100644 --- a/arch/powerpc/include/asm/ppc4xx-mal.h +++ b/arch/powerpc/include/asm/ppc4xx-mal.h @@ -1,6 +1,6 @@ /* include/mal.h, openbios_walnut, walnut_bios 8/6/99 08:48:40 */ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ /*----------------------------------------------------------------------------+ | diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h index 8d703c6634..e6a3bff079 100644 --- a/arch/powerpc/include/asm/ppc4xx.h +++ b/arch/powerpc/include/asm/ppc4xx.h @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ #ifndef __PPC4XX_H__ diff --git a/board/RPXlite_dw/README b/board/RPXlite_dw/README index 14296b2ab4..9e2d0f42a0 100644 --- a/board/RPXlite_dw/README +++ b/board/RPXlite_dw/README @@ -87,9 +87,9 @@ u-boot> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -A word on the U-Boot enviroment variable setting and usage : +A word on the U-Boot environment variable setting and usage : -In the beginning, you could just need very simple defult environment variable setting, +In the beginning, you could just need very simple default environment variable setting, like[include/configs/RPXlite.h] : #define CONFIG_BOOTCOMMAND \ diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index 97caf64d40..b0965ef211 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -21,6 +21,10 @@ #include <net.h> #include <netdev.h> +#ifdef CONFIG_USB_GADGET_ATMEL_USBA +#include <asm/arch/atmel_usba_udc.h> +#endif + DECLARE_GLOBAL_DATA_PTR; /* ------------------------------------------------------------------------- */ @@ -170,6 +174,9 @@ int board_init(void) #ifdef CONFIG_CMD_USB sama5d3xek_usb_hw_init(); #endif +#ifdef CONFIG_USB_GADGET_ATMEL_USBA + at91_udp_hw_init(); +#endif #ifdef CONFIG_GENERIC_ATMEL_MCI sama5d3xek_mci_hw_init(); #endif @@ -221,6 +228,12 @@ int board_eth_init(bd_t *bis) if (has_gmac()) rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00); #endif +#ifdef CONFIG_USB_GADGET_ATMEL_USBA + usba_udc_probe(&pdata); +#ifdef CONFIG_USB_ETH_RNDIS + usb_eth_initialize(bis); +#endif +#endif return rc; } diff --git a/board/cray/L1/init.S b/board/cray/L1/init.S index 82f21b08b2..44c688d1f0 100644 --- a/board/cray/L1/init.S +++ b/board/cray/L1/init.S @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ /*----------------------------------------------------------------------------- */ diff --git a/board/csb272/init.S b/board/csb272/init.S index b1283aa69a..5961978c86 100644 --- a/board/csb272/init.S +++ b/board/csb272/init.S @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ #include <config.h> #include <asm/ppc4xx.h> diff --git a/board/csb472/init.S b/board/csb472/init.S index f5805b7988..1ebc9ead3a 100644 --- a/board/csb472/init.S +++ b/board/csb472/init.S @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ #include <config.h> #include <asm/ppc4xx.h> diff --git a/board/esd/pci405/writeibm.S b/board/esd/pci405/writeibm.S index 38acca12bf..03eaf97b78 100644 --- a/board/esd/pci405/writeibm.S +++ b/board/esd/pci405/writeibm.S @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ /*----------------------------------------------------------------------------- */ /* Function: ext_bus_cntlr_init */ diff --git a/board/freescale/mx28evk/README b/board/freescale/mx28evk/README index 524f3fc494..0389a1d86c 100644 --- a/board/freescale/mx28evk/README +++ b/board/freescale/mx28evk/README @@ -29,11 +29,11 @@ Environment Storage There are two targets for mx28evk: -"make mx28evk_config" - store enviroment variables into MMC +"make mx28evk_config" - store environment variables into MMC or -"make mx28evk_nand_config" - store enviroment variables into NAND flash +"make mx28evk_nand_config" - store environment variables into NAND flash Choose the target accordingly. diff --git a/board/jse/init.S b/board/jse/init.S index 7b918b558d..4e449fef20 100644 --- a/board/jse/init.S +++ b/board/jse/init.S @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ /*------------------------------------------------------------------------- */ /* Function: ext_bus_cntlr_init */ diff --git a/board/mpl/common/pci.c b/board/mpl/common/pci.c index 6ab263a4d9..cd969cb518 100644 --- a/board/mpl/common/pci.c +++ b/board/mpl/common/pci.c @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ /* * Adapted for PIP405 03.07.01 diff --git a/board/mpl/mip405/init.S b/board/mpl/mip405/init.S index bf886c05c0..642f17c35b 100644 --- a/board/mpl/mip405/init.S +++ b/board/mpl/mip405/init.S @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ /*----------------------------------------------------------------------------- * Function: ext_bus_cntlr_init diff --git a/board/mpl/pip405/init.S b/board/mpl/pip405/init.S index 9ed27990a1..95fed34fcc 100644 --- a/board/mpl/pip405/init.S +++ b/board/mpl/pip405/init.S @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ /*----------------------------------------------------------------------------- * Function: ext_bus_cntlr_init diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts index 1e94c7f82c..b1bba9662e 100644 --- a/board/samsung/dts/exynos5250-smdk5250.dts +++ b/board/samsung/dts/exynos5250-smdk5250.dts @@ -36,6 +36,7 @@ mmc3 = "/mmc@12230000"; serial0 = "/serial@12C30000"; console = "/serial@12C30000"; + i2s = "/sound@3830000"; }; sromc@12250000 { @@ -49,16 +50,14 @@ }; }; - sound@12d60000 { - samsung,i2s-epll-clock-frequency = <192000000>; - samsung,i2s-sampling-rate = <48000>; - samsung,i2s-bits-per-sample = <16>; - samsung,i2s-channels = <2>; - samsung,i2s-lr-clk-framesize = <256>; - samsung,i2s-bit-clk-framesize = <32>; + sound@3830000 { samsung,codec-type = "wm8994"; }; + sound@12d60000 { + status = "disabled"; + }; + i2c@12c70000 { soundcodec@1a { reg = <0x1a>; diff --git a/board/samsung/dts/exynos5250-snow.dts b/board/samsung/dts/exynos5250-snow.dts index 7832e4edda..9b7e57e43d 100644 --- a/board/samsung/dts/exynos5250-snow.dts +++ b/board/samsung/dts/exynos5250-snow.dts @@ -36,6 +36,7 @@ mmc3 = "/mmc@12230000"; serial0 = "/serial@12C30000"; console = "/serial@12C30000"; + i2s = "/sound@3830000"; }; i2c4: i2c@12ca0000 { @@ -65,16 +66,15 @@ }; }; - sound@12d60000 { - samsung,i2s-epll-clock-frequency = <192000000>; - samsung,i2s-sampling-rate = <48000>; - samsung,i2s-bits-per-sample = <16>; - samsung,i2s-channels = <2>; - samsung,i2s-lr-clk-framesize = <256>; - samsung,i2s-bit-clk-framesize = <32>; + sound@3830000 { samsung,codec-type = "max98095"; + codec-enable-gpio = <&gpio 0xb7 0>; }; + sound@12d60000 { + status = "disabled"; + }; + i2c@12cd0000 { soundcodec@22 { reg = <0x22>; diff --git a/board/sbc8349/README b/board/sbc8349/README index 2c35919f28..e2d60cc530 100644 --- a/board/sbc8349/README +++ b/board/sbc8349/README @@ -50,7 +50,7 @@ is a summary of that information: trying to preserve your old environment settings and user flash). - Set the start address of the erase/flash process to FF80_0000 - Set the target RAM required to 64kB. - - Select sectors for erasing (see note on enviroment below) + - Select sectors for erasing (see note on environment below) - Select Erase and Reprogram. Note that some versions of the register files used with Workbench diff --git a/board/sc3/init.S b/board/sc3/init.S index 9921f8fc4f..46323d2688 100644 --- a/board/sc3/init.S +++ b/board/sc3/init.S @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ #include <config.h> #include <asm/ppc4xx.h> diff --git a/board/w7o/init.S b/board/w7o/init.S index 490411e6ee..54eda3299f 100644 --- a/board/w7o/init.S +++ b/board/w7o/init.S @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ #include <config.h> #include <asm/ppc4xx.h> diff --git a/boards.cfg b/boards.cfg index 80846c966c..c90ddddf13 100644 --- a/boards.cfg +++ b/boards.cfg @@ -38,7 +38,7 @@ # It can be used from a shell: # tools/reformat.py -i -d '-' -s 8 <boards.cfg >boards0.cfg && mv boards0.cfg boards.cfg # It can directly be invoked from vim: -# :%tools/reformat.py -i -d '-' -s 8 +# :%!tools/reformat.py -i -d '-' -s 8 # # Status, Arch, CPU:SPLCPU, SoC, Vendor, Board name, Target, Options, Maintainers ########################################################################################################### diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index b07b0f48b2..166b901d76 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -558,6 +558,7 @@ static ulong bootm_disable_interrupts(void) #ifdef CONFIG_NETCONSOLE /* Stop the ethernet stack if NetConsole could have left it up */ eth_halt(); + eth_unregister(eth_get_dev()); #endif #if defined(CONFIG_CMD_USB) @@ -799,8 +800,12 @@ int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return do_bootm_states(cmdtp, flag, argc, argv, BOOTM_STATE_START | BOOTM_STATE_FINDOS | BOOTM_STATE_FINDOTHER | - BOOTM_STATE_LOADOS | BOOTM_STATE_OS_PREP | - BOOTM_STATE_OS_FAKE_GO | BOOTM_STATE_OS_GO, &images, 1); + BOOTM_STATE_LOADOS | +#if defined(CONFIG_PPC) || defined(CONFIG_MIPS) + BOOTM_STATE_OS_CMDLINE | +#endif + BOOTM_STATE_OS_PREP | BOOTM_STATE_OS_FAKE_GO | + BOOTM_STATE_OS_GO, &images, 1); } int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd) diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index 793c422123..7ce92cec87 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -9,34 +9,20 @@ */ #include <common.h> -#include <command.h> -#include <malloc.h> #include <dfu.h> -#include <asm/errno.h> #include <g_dnl.h> static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - const char *str_env; char *s = "dfu"; int ret, i = 0; - char *env_bkp; if (argc < 3) return CMD_RET_USAGE; - str_env = getenv("dfu_alt_info"); - if (str_env == NULL) { - printf("%s: \"dfu_alt_info\" env variable not defined!\n", - __func__); - return CMD_RET_FAILURE; - } - - env_bkp = strdup(str_env); - ret = dfu_config_entities(env_bkp, argv[1], - (int)simple_strtoul(argv[2], NULL, 10)); + ret = dfu_init_env_entities(argv[1], simple_strtoul(argv[2], NULL, 10)); if (ret) - return CMD_RET_FAILURE; + return ret; if (argc > 3 && strcmp(argv[3], "list") == 0) { dfu_show_entities(); @@ -67,7 +53,6 @@ exit: g_dnl_unregister(); done: dfu_free_entities(); - free(env_bkp); if (dfu_reset()) run_command("reset", 0); diff --git a/common/cmd_gpt.c b/common/cmd_gpt.c index 06767aa5e5..a46f5cc343 100644 --- a/common/cmd_gpt.c +++ b/common/cmd_gpt.c @@ -161,7 +161,7 @@ static int set_gpt_info(block_dev_desc_t *dev_desc, /* allocate memory for partitions */ parts = calloc(sizeof(disk_partition_t), p_count); - /* retrive partions data from string */ + /* retrieve partitions data from string */ for (i = 0; i < p_count; i++) { tok = strsep(&s, ";"); @@ -316,7 +316,7 @@ static int do_gpt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD(gpt, CONFIG_SYS_MAXARGS, 1, do_gpt, "GUID Partition Table", - "<command> <interface> <dev> <partions_list>\n" + "<command> <interface> <dev> <partitions_list>\n" " - GUID partition table restoration\n" " Restore GPT information on a device connected\n" " to interface\n" diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 1cdeb443fc..67a94a7468 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -260,7 +260,7 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (!ret) mmc->part_num = part; - printf("switch to partions #%d, %s\n", + printf("switch to partitions #%d, %s\n", part, (!ret) ? "OK" : "ERROR"); } } @@ -421,7 +421,7 @@ U_BOOT_CMD( "mmc close <dev> <boot_partition>\n" " - Enable boot_part for booting and disable access to boot_part\n" "mmc bootpart <device num> <boot part size MB> <RPMB part size MB>\n" - " - change sizes of boot and RPMB partions of specified device\n" + " - change sizes of boot and RPMB partitions of specified device\n" #endif ); #endif /* !CONFIG_GENERIC_MMC */ diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c index 3023479d1d..38a6e6d07e 100644 --- a/common/cmd_mtdparts.c +++ b/common/cmd_mtdparts.c @@ -420,7 +420,7 @@ static int part_validate(struct mtdids *id, struct part_info *part) } /** - * Delete selected partition from the partion list of the specified device. + * Delete selected partition from the partition list of the specified device. * * @param dev device to delete partition from * @param part partition to delete diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c index a2fb50ab9d..c5f4a221b8 100644 --- a/common/cmd_pxe.c +++ b/common/cmd_pxe.c @@ -572,7 +572,7 @@ static int label_localboot(struct pxe_label *label) * If the label specifies an 'append' line, its contents will overwrite that * of the 'bootargs' environment variable. */ -static int label_boot(struct pxe_label *label) +static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label) { char *bootm_argv[] = { "bootm", NULL, NULL, NULL, NULL }; char initrd_str[22]; @@ -684,11 +684,11 @@ static int label_boot(struct pxe_label *label) if (bootm_argv[3]) bootm_argc = 4; - do_bootm(NULL, 0, bootm_argc, bootm_argv); + do_bootm(cmdtp, 0, bootm_argc, bootm_argv); #ifdef CONFIG_CMD_BOOTZ /* Try booting a zImage if do_bootm returns */ - do_bootz(NULL, 0, bootm_argc, bootm_argv); + do_bootz(cmdtp, 0, bootm_argc, bootm_argv); #endif return 1; } @@ -1355,7 +1355,7 @@ static struct menu *pxe_menu_to_menu(struct pxe_menu *cfg) /* * Try to boot any labels we have yet to attempt to boot. */ -static void boot_unattempted_labels(struct pxe_menu *cfg) +static void boot_unattempted_labels(cmd_tbl_t *cmdtp, struct pxe_menu *cfg) { struct list_head *pos; struct pxe_label *label; @@ -1364,7 +1364,7 @@ static void boot_unattempted_labels(struct pxe_menu *cfg) label = list_entry(pos, struct pxe_label, list); if (!label->attempted) - label_boot(label); + label_boot(cmdtp, label); } } @@ -1380,7 +1380,7 @@ static void boot_unattempted_labels(struct pxe_menu *cfg) * If this function returns, there weren't any labels that successfully * booted, or the user interrupted the menu selection via ctrl+c. */ -static void handle_pxe_menu(struct pxe_menu *cfg) +static void handle_pxe_menu(cmd_tbl_t *cmdtp, struct pxe_menu *cfg) { void *choice; struct menu *m; @@ -1406,14 +1406,14 @@ static void handle_pxe_menu(struct pxe_menu *cfg) */ if (err == 1) { - err = label_boot(choice); + err = label_boot(cmdtp, choice); if (!err) return; } else if (err != -ENOENT) { return; } - boot_unattempted_labels(cfg); + boot_unattempted_labels(cmdtp, cfg); } /* @@ -1453,7 +1453,7 @@ do_pxe_boot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } - handle_pxe_menu(cfg); + handle_pxe_menu(cmdtp, cfg); destroy_pxe_menu(cfg); @@ -1559,7 +1559,7 @@ int do_sysboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (prompt) cfg->prompt = 1; - handle_pxe_menu(cfg); + handle_pxe_menu(cmdtp, cfg); destroy_pxe_menu(cfg); diff --git a/common/cmd_sf.c b/common/cmd_sf.c index 4af0f0af26..3f60979ae7 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -152,8 +152,10 @@ static const char *spi_flash_update_block(struct spi_flash *flash, u32 offset, { debug("offset=%#x, sector_size=%#x, len=%#zx\n", offset, flash->sector_size, len); - if (spi_flash_read(flash, offset, len, cmp_buf)) + /* Read the entire sector so to allow for rewriting */ + if (spi_flash_read(flash, offset, flash->sector_size, cmp_buf)) return "read"; + /* Compare only what is meaningful (len) */ if (memcmp(cmp_buf, buf, len) == 0) { debug("Skip region %x size %zx: no change\n", offset, len); @@ -163,8 +165,17 @@ static const char *spi_flash_update_block(struct spi_flash *flash, u32 offset, /* Erase the entire sector */ if (spi_flash_erase(flash, offset, flash->sector_size)) return "erase"; + /* Write the initial part of the block from the source */ if (spi_flash_write(flash, offset, len, buf)) return "write"; + /* If it's a partial sector, rewrite the existing part */ + if (len != flash->sector_size) { + /* Rewrite the original data to the end of the sector */ + if (spi_flash_write(flash, offset + len, + flash->sector_size - len, &cmp_buf[len])) + return "write"; + } + return NULL; } diff --git a/common/cmd_usb_mass_storage.c b/common/cmd_usb_mass_storage.c index 33a4715005..ccf7195946 100644 --- a/common/cmd_usb_mass_storage.c +++ b/common/cmd_usb_mass_storage.c @@ -5,7 +5,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <errno.h> #include <common.h> #include <command.h> #include <g_dnl.h> diff --git a/common/image-fdt.c b/common/image-fdt.c index 2e22cca54e..6f9ce7d37c 100644 --- a/common/image-fdt.c +++ b/common/image-fdt.c @@ -55,7 +55,7 @@ static const image_header_t *image_get_fdt(ulong fdt_addr) fdt_error("uImage is compressed"); return NULL; } - if (fdt_check_header((char *)image_get_data(fdt_hdr)) != 0) { + if (fdt_check_header((void *)image_get_data(fdt_hdr)) != 0) { fdt_error("uImage data is not a fdt"); return NULL; } diff --git a/common/image-fit.c b/common/image-fit.c index 199b4ed16a..cf4b67e3e8 100644 --- a/common/image-fit.c +++ b/common/image-fit.c @@ -58,7 +58,7 @@ static int fit_parse_spec(const char *spec, char sepc, ulong addr_curr, * @conf_name double pointer to a char, will hold pointer to a configuration * unit name * - * fit_parse_conf() expects configuration spec in the for of [<addr>]#<conf>, + * fit_parse_conf() expects configuration spec in the form of [<addr>]#<conf>, * where <addr> is a FIT image address that contains configuration * with a <conf> unit name. * @@ -84,7 +84,7 @@ int fit_parse_conf(const char *spec, ulong addr_curr, * subimage * @image_name: double pointer to a char, will hold pointer to a subimage name * - * fit_parse_subimage() expects subimage spec in the for of + * fit_parse_subimage() expects subimage spec in the form of * [<addr>]:<subimage>, where <addr> is a FIT image address that contains * subimage with a <subimg> unit name. * @@ -1331,7 +1331,7 @@ int fit_conf_find_compat(const void *fit, const void *fdt) * * When NULL is provided in second argument fit_conf_get_node() will search * for a default configuration node instead. Default configuration node unit - * name is retrived from FIT_DEFAULT_PROP property of the '/configurations' + * name is retrieved from FIT_DEFAULT_PROP property of the '/configurations' * node. * * returns: @@ -1596,7 +1596,7 @@ int fit_image_load(bootm_headers_t *images, const char *prop_name, ulong addr, len = (ulong)size; /* verify that image data is a proper FDT blob */ - if (image_type == IH_TYPE_FLATDT && fdt_check_header((char *)buf)) { + if (image_type == IH_TYPE_FLATDT && fdt_check_header(buf)) { puts("Subimage data is not a FDT"); return -ENOEXEC; } diff --git a/common/image.c b/common/image.c index 2c88091e6d..b0ae58ff3e 100644 --- a/common/image.c +++ b/common/image.c @@ -652,17 +652,13 @@ int genimg_get_format(const void *img_addr) { ulong format = IMAGE_FORMAT_INVALID; const image_header_t *hdr; -#if defined(CONFIG_FIT) || defined(CONFIG_OF_LIBFDT) - char *fit_hdr; -#endif hdr = (const image_header_t *)img_addr; if (image_check_magic(hdr)) format = IMAGE_FORMAT_LEGACY; #if defined(CONFIG_FIT) || defined(CONFIG_OF_LIBFDT) else { - fit_hdr = (char *)img_addr; - if (fdt_check_header(fit_hdr) == 0) + if (fdt_check_header(img_addr) == 0) format = IMAGE_FORMAT_FIT; } #endif @@ -965,7 +961,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, * @initrd_end: pointer to a ulong variable, will hold final init ramdisk * end address (after possible relocation) * - * boot_ramdisk_high() takes a relocation hint from "initrd_high" environement + * boot_ramdisk_high() takes a relocation hint from "initrd_high" environment * variable and if requested ramdisk data is moved to a specified location. * * Initrd_start and initrd_end are set to final (after relocation) ramdisk diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index f27b4c277b..fc2f2260f8 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -9,7 +9,6 @@ #include <common.h> #include <spl.h> #include <asm/u-boot.h> -#include <asm/utils.h> #include <mmc.h> #include <fat.h> #include <version.h> @@ -45,8 +44,10 @@ static int mmc_load_image_raw(struct mmc *mmc, unsigned long sector) (void *)spl_image.load_addr); end: +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT if (err == 0) printf("spl: mmc blk read err - %lu\n", err); +#endif return (err == 0); } @@ -58,7 +59,9 @@ static int mmc_load_image_raw_os(struct mmc *mmc) CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS, (void *)CONFIG_SYS_SPL_ARGS_ADDR)) { +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("mmc args blk read error\n"); +#endif return -1; } @@ -84,9 +87,11 @@ static int mmc_load_image_fat(struct mmc *mmc, const char *filename) err = file_fat_read(filename, (u8 *)spl_image.load_addr, 0); end: +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT if (err <= 0) printf("spl: error reading image %s, err - %d\n", filename, err); +#endif return (err <= 0); } @@ -99,8 +104,10 @@ static int mmc_load_image_fat_os(struct mmc *mmc) err = file_fat_read(CONFIG_SPL_FAT_LOAD_ARGS_NAME, (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0); if (err <= 0) { +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("spl: error reading image %s, err - %d\n", CONFIG_SPL_FAT_LOAD_ARGS_NAME, err); +#endif return -1; } @@ -120,13 +127,17 @@ void spl_mmc_load_image(void) /* We register only one device. So, the dev id is always 0 */ mmc = find_mmc_device(0); if (!mmc) { +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT puts("spl: mmc device not found!!\n"); +#endif hang(); } err = mmc_init(mmc); if (err) { +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("spl: mmc init failed: err - %d\n", err); +#endif hang(); } @@ -145,7 +156,9 @@ void spl_mmc_load_image(void) err = fat_register_device(&mmc->block_dev, CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION); if (err) { +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("spl: fat register err - %d\n", err); +#endif hang(); } @@ -155,7 +168,9 @@ void spl_mmc_load_image(void) err = mmc_load_image_fat(mmc, CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME); #endif } else { +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT puts("spl: wrong MMC boot mode\n"); +#endif hang(); } diff --git a/disk/part_efi.c b/disk/part_efi.c index b7524d68ba..9c33ae7a31 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -164,8 +164,9 @@ int get_partition_info_efi(block_dev_desc_t * dev_desc, int part, if (part > le32_to_cpu(gpt_head->num_partition_entries) || !is_pte_valid(&gpt_pte[part - 1])) { - printf("%s: *** ERROR: Invalid partition number %d ***\n", + debug("%s: *** ERROR: Invalid partition number %d ***\n", __func__, part); + free(gpt_pte); return -1; } diff --git a/doc/README.hwconfig b/doc/README.hwconfig index cf549651c7..b6ddb438cf 100644 --- a/doc/README.hwconfig +++ b/doc/README.hwconfig @@ -18,7 +18,7 @@ Current implementation details/limitations: U-Boot. But I haven't bothered yet. 2. Since we don't implement a hwconfig command, i.e. we're working - with the environement directly, there is no way to tell that + with the environment directly, there is no way to tell that toggling a particular option will need a reboot to take effect. So, for now it's advised to always reboot the target after modifying the hwconfig variable. diff --git a/doc/git-mailrc b/doc/git-mailrc index 2cacaa0341..251586e052 100644 --- a/doc/git-mailrc +++ b/doc/git-mailrc @@ -18,6 +18,7 @@ alias galak Kumar Gala <galak@kernel.crashing.org> alias gruss Graeme Russ <graeme.russ@gmail.com> alias hs Heiko Schocher <hs@denx.de> alias iwamatsu Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +alias jagan Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> alias jasonjin Jason Jin <jason.jin@freescale.com> alias jhersh Joe Hershberger <joe.hershberger@gmail.com> alias kimphill Kim Phillips <kim.phillips@freescale.com> @@ -106,5 +107,6 @@ alias i2c uboot, hs alias mmc uboot, panto alias nand uboot, scottwood alias net uboot, jhersh +alias spi uboot, jagan alias usb uboot, marex alias video uboot, ag diff --git a/doc/uImage.FIT/command_syntax_extensions.txt b/doc/uImage.FIT/command_syntax_extensions.txt index 002818c226..6c99b1c159 100644 --- a/doc/uImage.FIT/command_syntax_extensions.txt +++ b/doc/uImage.FIT/command_syntax_extensions.txt @@ -170,7 +170,7 @@ bootm 200000 In case of the new uImage argument syntax, the address portion of any argument can be omitted. If <addr3> is omitted, then it is assumed that image at -<addr2> should be used. Similarly, when <addr2> is omitted, is is assumed that +<addr2> should be used. Similarly, when <addr2> is omitted, it is assumed that image at <addr1> should be used. If <addr1> is omitted, it is assumed that the current image address is to be used. For example, consider the following commands: diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt index 6d2070758d..160b2d05f8 100644 --- a/doc/uImage.FIT/source_file_format.txt +++ b/doc/uImage.FIT/source_file_format.txt @@ -62,7 +62,7 @@ c) Image building procedure The following picture shows how the new uImage is prepared. Input consists of image source file (.its) and a set of data files. Image is created with the help of standard U-boot mkimage tool which in turn uses dtc (device tree -compiler) to produce image tree blob (.itb). Resulting .itb file is is the +compiler) to produce image tree blob (.itb). Resulting .itb file is the actual binary of a new uImage. diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c index c538e370e1..6f1ac85723 100644 --- a/drivers/block/sym53c8xx.c +++ b/drivers/block/sym53c8xx.c @@ -248,7 +248,7 @@ void scsi_print_error (ccb * pccb) /****************************************************************************** * sets-up the SCSI controller - * the base memory address is retrived via the pci_read_config_dword + * the base memory address is retrieved via the pci_read_config_dword */ void scsi_low_level_init(int busdevfunc) { diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile index fca370ae04..de9e44e1ef 100644 --- a/drivers/dfu/Makefile +++ b/drivers/dfu/Makefile @@ -12,6 +12,7 @@ LIB = $(obj)libdfu.o COBJS-$(CONFIG_DFU_FUNCTION) += dfu.o COBJS-$(CONFIG_DFU_MMC) += dfu_mmc.o COBJS-$(CONFIG_DFU_NAND) += dfu_nand.o +COBJS-$(CONFIG_DFU_RAM) += dfu_ram.o SRCS := $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index d73d510391..56b21c78ab 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -41,6 +41,29 @@ static int dfu_find_alt_num(const char *s) return ++i; } +int dfu_init_env_entities(char *interface, int dev) +{ + const char *str_env; + char *env_bkp; + int ret; + + str_env = getenv("dfu_alt_info"); + if (!str_env) { + error("\"dfu_alt_info\" env variable not defined!\n"); + return -EINVAL; + } + + env_bkp = strdup(str_env); + ret = dfu_config_entities(env_bkp, interface, dev); + if (ret) { + error("DFU entities configuration failed!\n"); + return ret; + } + + free(env_bkp); + return 0; +} + static unsigned char *dfu_buf; static unsigned long dfu_buf_size = CONFIG_SYS_DFU_DATA_BUF_SIZE; @@ -153,8 +176,8 @@ int dfu_write(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num) /* we should be in buffer now (if not then size too large) */ if ((dfu->i_buf + size) > dfu->i_buf_end) { - printf("%s: Wrong size! [%d] [%d] - %d\n", - __func__, dfu->i_blk_seq_num, blk_seq_num, size); + error("Buffer overflow! (0x%p + 0x%x > 0x%p)\n", dfu->i_buf, + size, dfu->i_buf_end); return -1; } @@ -325,6 +348,9 @@ static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt, } else if (strcmp(interface, "nand") == 0) { if (dfu_fill_entity_nand(dfu, s)) return -1; + } else if (strcmp(interface, "ram") == 0) { + if (dfu_fill_entity_ram(dfu, s)) + return -1; } else { printf("%s: Device %s not (yet) supported!\n", __func__, interface); @@ -374,14 +400,14 @@ int dfu_config_entities(char *env, char *interface, int num) const char *dfu_get_dev_type(enum dfu_device_type t) { - const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND" }; + const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND", "RAM" }; return dev_t[t]; } const char *dfu_get_layout(enum dfu_layout l) { const char *dfu_layout[] = {NULL, "RAW_ADDR", "FAT", "EXT2", - "EXT3", "EXT4" }; + "EXT3", "EXT4", "RAM_ADDR" }; return dfu_layout[l]; } diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c index 0871a770b7..f942758696 100644 --- a/drivers/dfu/dfu_mmc.c +++ b/drivers/dfu/dfu_mmc.c @@ -13,16 +13,11 @@ #include <div64.h> #include <dfu.h> -enum dfu_mmc_op { - DFU_OP_READ = 1, - DFU_OP_WRITE, -}; - static unsigned char __aligned(CONFIG_SYS_CACHELINE_SIZE) dfu_file_buf[CONFIG_SYS_DFU_MAX_FILE_SIZE]; static long dfu_file_buf_len; -static int mmc_block_op(enum dfu_mmc_op op, struct dfu_entity *dfu, +static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu, u64 offset, void *buf, long *len) { char cmd_buf[DFU_CMD_BUF_SIZE]; @@ -65,7 +60,7 @@ static int mmc_file_buffer(struct dfu_entity *dfu, void *buf, long *len) return 0; } -static int mmc_file_op(enum dfu_mmc_op op, struct dfu_entity *dfu, +static int mmc_file_op(enum dfu_op op, struct dfu_entity *dfu, void *buf, long *len) { char cmd_buf[DFU_CMD_BUF_SIZE]; diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c index 0ec12cff26..edbf5a97b9 100644 --- a/drivers/dfu/dfu_nand.c +++ b/drivers/dfu/dfu_nand.c @@ -19,12 +19,7 @@ #include <jffs2/load_kernel.h> #include <nand.h> -enum dfu_nand_op { - DFU_OP_READ = 1, - DFU_OP_WRITE, -}; - -static int nand_block_op(enum dfu_nand_op op, struct dfu_entity *dfu, +static int nand_block_op(enum dfu_op op, struct dfu_entity *dfu, u64 offset, void *buf, long *len) { loff_t start, lim; diff --git a/drivers/dfu/dfu_ram.c b/drivers/dfu/dfu_ram.c new file mode 100644 index 0000000000..335a8e1f24 --- /dev/null +++ b/drivers/dfu/dfu_ram.c @@ -0,0 +1,77 @@ +/* + * (C) Copyright 2013 + * Afzal Mohammed <afzal.mohd.ma@gmail.com> + * + * Reference: dfu_mmc.c + * Copyright (C) 2012 Samsung Electronics + * author: Lukasz Majewski <l.majewski@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <dfu.h> + +static int dfu_transfer_medium_ram(enum dfu_op op, struct dfu_entity *dfu, + u64 offset, void *buf, long *len) +{ + if (dfu->layout != DFU_RAM_ADDR) { + error("unsupported layout: %s\n", dfu_get_layout(dfu->layout)); + return -EINVAL; + } + + if (offset > dfu->data.ram.size) { + error("request exceeds allowed area\n"); + return -EINVAL; + } + + if (op == DFU_OP_WRITE) + memcpy(dfu->data.ram.start + offset, buf, *len); + else + memcpy(buf, dfu->data.ram.start + offset, *len); + + return 0; +} + +static int dfu_write_medium_ram(struct dfu_entity *dfu, u64 offset, + void *buf, long *len) +{ + return dfu_transfer_medium_ram(DFU_OP_WRITE, dfu, offset, buf, len); +} + +static int dfu_read_medium_ram(struct dfu_entity *dfu, u64 offset, + void *buf, long *len) +{ + if (!*len) { + *len = dfu->data.ram.size; + return 0; + } + + return dfu_transfer_medium_ram(DFU_OP_READ, dfu, offset, buf, len); +} + +int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +{ + char *st; + + dfu->dev_type = DFU_DEV_RAM; + st = strsep(&s, " "); + if (strcmp(st, "ram")) { + error("unsupported device: %s\n", st); + return -ENODEV; + } + + dfu->layout = DFU_RAM_ADDR; + dfu->data.ram.start = (void *)simple_strtoul(s, &s, 16); + s++; + dfu->data.ram.size = simple_strtoul(s, &s, 16); + + dfu->write_medium = dfu_write_medium_ram; + dfu->read_medium = dfu_read_medium_ram; + + dfu->inited = 0; + + return 0; +} diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index bedf833f70..06280d1fa6 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -34,6 +34,8 @@ COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o COBJS-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o ifdef CONFIG_SPL_BUILD COBJS-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o +else +COBJS-$(CONFIG_GENERIC_MMC) += mmc_write.o endif COBJS := $(COBJS-y) diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index a82ee17a25..9a803a02d4 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -41,12 +41,11 @@ static void dwmci_set_idma_desc(struct dwmci_idmac *idmac, } static void dwmci_prepare_data(struct dwmci_host *host, - struct mmc_data *data) + struct mmc_data *data, struct dwmci_idmac *cur_idmac) { unsigned long ctrl; unsigned int i = 0, flags, cnt, blk_cnt; ulong data_start, data_end, start_addr; - ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac, data->blocks); blk_cnt = data->blocks; @@ -73,7 +72,7 @@ static void dwmci_prepare_data(struct dwmci_host *host, dwmci_set_idma_desc(cur_idmac, flags, cnt, start_addr + (i * PAGE_SIZE)); - if(blk_cnt < 8) + if (blk_cnt <= 8) break; blk_cnt -= 8; cur_idmac++; @@ -111,6 +110,8 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { struct dwmci_host *host = (struct dwmci_host *)mmc->priv; + ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac, + data ? DIV_ROUND_UP(data->blocks, 8) : 0); int flags = 0, i; unsigned int timeout = 100000; u32 retry = 10000; @@ -127,7 +128,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL); if (data) - dwmci_prepare_data(host, data); + dwmci_prepare_data(host, data, cur_idmac); dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg); diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 55026759ed..84dae4d8bd 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -15,6 +15,7 @@ #include <malloc.h> #include <linux/list.h> #include <div64.h> +#include "mmc_private.h" /* Set block count limit because of 16 bit register limit on some hardware*/ #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT @@ -52,14 +53,10 @@ int __board_mmc_getcd(struct mmc *mmc) { int board_mmc_getcd(struct mmc *mmc)__attribute__((weak, alias("__board_mmc_getcd"))); -static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) +int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { - struct mmc_data backup; int ret; - memset(&backup, 0, sizeof(backup)); - #ifdef CONFIG_MMC_TRACE int i; u8 *ptr; @@ -114,7 +111,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, return ret; } -static int mmc_send_status(struct mmc *mmc, int timeout) +int mmc_send_status(struct mmc *mmc, int timeout) { struct mmc_cmd cmd; int err, retries = 5; @@ -135,8 +132,10 @@ static int mmc_send_status(struct mmc *mmc, int timeout) MMC_STATE_PRG) break; else if (cmd.response[0] & MMC_STATUS_MASK) { +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("Status Error: 0x%08X\n", cmd.response[0]); +#endif return COMM_ERR; } } else if (--retries < 0) @@ -151,14 +150,16 @@ static int mmc_send_status(struct mmc *mmc, int timeout) printf("CURR STATE:%d\n", status); #endif if (timeout <= 0) { +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("Timeout waiting card ready\n"); +#endif return TIMEOUT; } return 0; } -static int mmc_set_blocklen(struct mmc *mmc, int len) +int mmc_set_blocklen(struct mmc *mmc, int len) { struct mmc_cmd cmd; @@ -181,179 +182,13 @@ struct mmc *find_mmc_device(int dev_num) return m; } +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("MMC Device %d not found\n", dev_num); +#endif return NULL; } -static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt) -{ - struct mmc_cmd cmd; - ulong end; - int err, start_cmd, end_cmd; - - if (mmc->high_capacity) - end = start + blkcnt - 1; - else { - end = (start + blkcnt - 1) * mmc->write_bl_len; - start *= mmc->write_bl_len; - } - - if (IS_SD(mmc)) { - start_cmd = SD_CMD_ERASE_WR_BLK_START; - end_cmd = SD_CMD_ERASE_WR_BLK_END; - } else { - start_cmd = MMC_CMD_ERASE_GROUP_START; - end_cmd = MMC_CMD_ERASE_GROUP_END; - } - - cmd.cmdidx = start_cmd; - cmd.cmdarg = start; - cmd.resp_type = MMC_RSP_R1; - - err = mmc_send_cmd(mmc, &cmd, NULL); - if (err) - goto err_out; - - cmd.cmdidx = end_cmd; - cmd.cmdarg = end; - - err = mmc_send_cmd(mmc, &cmd, NULL); - if (err) - goto err_out; - - cmd.cmdidx = MMC_CMD_ERASE; - cmd.cmdarg = SECURE_ERASE; - cmd.resp_type = MMC_RSP_R1b; - - err = mmc_send_cmd(mmc, &cmd, NULL); - if (err) - goto err_out; - - return 0; - -err_out: - puts("mmc erase failed\n"); - return err; -} - -static unsigned long -mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt) -{ - int err = 0; - struct mmc *mmc = find_mmc_device(dev_num); - lbaint_t blk = 0, blk_r = 0; - int timeout = 1000; - - if (!mmc) - return -1; - - if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size)) - printf("\n\nCaution! Your devices Erase group is 0x%x\n" - "The erase range would be change to " - "0x" LBAF "~0x" LBAF "\n\n", - mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1), - ((start + blkcnt + mmc->erase_grp_size) - & ~(mmc->erase_grp_size - 1)) - 1); - - while (blk < blkcnt) { - blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ? - mmc->erase_grp_size : (blkcnt - blk); - err = mmc_erase_t(mmc, start + blk, blk_r); - if (err) - break; - - blk += blk_r; - - /* Waiting for the ready status */ - if (mmc_send_status(mmc, timeout)) - return 0; - } - - return blk; -} - -static ulong -mmc_write_blocks(struct mmc *mmc, lbaint_t start, lbaint_t blkcnt, const void*src) -{ - struct mmc_cmd cmd; - struct mmc_data data; - int timeout = 1000; - - if ((start + blkcnt) > mmc->block_dev.lba) { - printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n", - start + blkcnt, mmc->block_dev.lba); - return 0; - } - - if (blkcnt == 0) - return 0; - else if (blkcnt == 1) - cmd.cmdidx = MMC_CMD_WRITE_SINGLE_BLOCK; - else - cmd.cmdidx = MMC_CMD_WRITE_MULTIPLE_BLOCK; - - if (mmc->high_capacity) - cmd.cmdarg = start; - else - cmd.cmdarg = start * mmc->write_bl_len; - - cmd.resp_type = MMC_RSP_R1; - - data.src = src; - data.blocks = blkcnt; - data.blocksize = mmc->write_bl_len; - data.flags = MMC_DATA_WRITE; - - if (mmc_send_cmd(mmc, &cmd, &data)) { - printf("mmc write failed\n"); - return 0; - } - - /* SPI multiblock writes terminate using a special - * token, not a STOP_TRANSMISSION request. - */ - if (!mmc_host_is_spi(mmc) && blkcnt > 1) { - cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; - cmd.cmdarg = 0; - cmd.resp_type = MMC_RSP_R1b; - if (mmc_send_cmd(mmc, &cmd, NULL)) { - printf("mmc fail to send stop cmd\n"); - return 0; - } - } - - /* Waiting for the ready status */ - if (mmc_send_status(mmc, timeout)) - return 0; - - return blkcnt; -} - -static ulong -mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt, const void*src) -{ - lbaint_t cur, blocks_todo = blkcnt; - - struct mmc *mmc = find_mmc_device(dev_num); - if (!mmc) - return 0; - - if (mmc_set_blocklen(mmc, mmc->write_bl_len)) - return 0; - - do { - cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo; - if(mmc_write_blocks(mmc, start, cur, src) != cur) - return 0; - blocks_todo -= cur; - start += cur; - src += cur * mmc->write_bl_len; - } while (blocks_todo > 0); - - return blkcnt; -} - static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start, lbaint_t blkcnt) { @@ -385,7 +220,9 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start, cmd.cmdarg = 0; cmd.resp_type = MMC_RSP_R1b; if (mmc_send_cmd(mmc, &cmd, NULL)) { +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("mmc fail to send stop cmd\n"); +#endif return 0; } } @@ -405,8 +242,10 @@ static ulong mmc_bread(int dev_num, lbaint_t start, lbaint_t blkcnt, void *dst) return 0; if ((start + blkcnt) > mmc->block_dev.lba) { +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n", start + blkcnt, mmc->block_dev.lba); +#endif return 0; } @@ -1268,6 +1107,7 @@ static int mmc_startup(struct mmc *mmc) mmc->block_dev.blksz = mmc->read_bl_len; mmc->block_dev.log2blksz = LOG2(mmc->block_dev.blksz); mmc->block_dev.lba = lldiv(mmc->capacity, mmc->read_bl_len); +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) sprintf(mmc->block_dev.vendor, "Man %06x Snr %04x%04x", mmc->cid[0] >> 24, (mmc->cid[2] & 0xffff), (mmc->cid[3] >> 16) & 0xffff); @@ -1277,6 +1117,11 @@ static int mmc_startup(struct mmc *mmc) (mmc->cid[2] >> 24) & 0xff); sprintf(mmc->block_dev.revision, "%d.%d", (mmc->cid[2] >> 20) & 0xf, (mmc->cid[2] >> 16) & 0xf); +#else + mmc->block_dev.vendor[0] = 0; + mmc->block_dev.product[0] = 0; + mmc->block_dev.revision[0] = 0; +#endif #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT) init_part(&mmc->block_dev); #endif @@ -1343,7 +1188,9 @@ int mmc_start_init(struct mmc *mmc) if (mmc_getcd(mmc) == 0) { mmc->has_init = 0; +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("MMC: no card present\n"); +#endif return NO_CARD_ERR; } @@ -1378,7 +1225,9 @@ int mmc_start_init(struct mmc *mmc) err = mmc_send_op_cond(mmc); if (err && err != IN_PROGRESS) { +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("Card did not respond to voltage select!\n"); +#endif return UNUSABLE_ERR; } } @@ -1434,6 +1283,8 @@ static int __def_mmc_init(bd_t *bis) int cpu_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init"))); int board_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init"))); +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) + void print_mmc_devices(char separator) { struct mmc *m; @@ -1451,6 +1302,10 @@ void print_mmc_devices(char separator) printf("\n"); } +#else +void print_mmc_devices(char separator) { } +#endif + int get_mmc_num(void) { return cur_dev_num; diff --git a/drivers/mmc/mmc_private.h b/drivers/mmc/mmc_private.h new file mode 100644 index 0000000000..16dcf9ff61 --- /dev/null +++ b/drivers/mmc/mmc_private.h @@ -0,0 +1,45 @@ +/* + * Copyright 2008,2010 Freescale Semiconductor, Inc + * Andy Fleming + * + * Based (loosely) on the Linux code + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MMC_PRIVATE_H_ +#define _MMC_PRIVATE_H_ + +#include <mmc.h> + +extern int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data); +extern int mmc_send_status(struct mmc *mmc, int timeout); +extern int mmc_set_blocklen(struct mmc *mmc, int len); + +#ifndef CONFIG_SPL_BUILD + +extern unsigned long mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt); + +extern ulong mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt, + const void *src); + +#else /* CONFIG_SPL_BUILD */ + +/* SPL will never write or erase, declare dummies to reduce code size. */ + +static inline unsigned long mmc_berase(int dev_num, lbaint_t start, + lbaint_t blkcnt) +{ + return 0; +} + +static inline ulong mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt, + const void *src) +{ + return 0; +} + +#endif /* CONFIG_SPL_BUILD */ + +#endif /* _MMC_PRIVATE_H_ */ diff --git a/drivers/mmc/mmc_write.c b/drivers/mmc/mmc_write.c new file mode 100644 index 0000000000..aa2fdefa75 --- /dev/null +++ b/drivers/mmc/mmc_write.c @@ -0,0 +1,179 @@ +/* + * Copyright 2008, Freescale Semiconductor, Inc + * Andy Fleming + * + * Based vaguely on the Linux code + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <common.h> +#include <part.h> +#include "mmc_private.h" + +static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt) +{ + struct mmc_cmd cmd; + ulong end; + int err, start_cmd, end_cmd; + + if (mmc->high_capacity) { + end = start + blkcnt - 1; + } else { + end = (start + blkcnt - 1) * mmc->write_bl_len; + start *= mmc->write_bl_len; + } + + if (IS_SD(mmc)) { + start_cmd = SD_CMD_ERASE_WR_BLK_START; + end_cmd = SD_CMD_ERASE_WR_BLK_END; + } else { + start_cmd = MMC_CMD_ERASE_GROUP_START; + end_cmd = MMC_CMD_ERASE_GROUP_END; + } + + cmd.cmdidx = start_cmd; + cmd.cmdarg = start; + cmd.resp_type = MMC_RSP_R1; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) + goto err_out; + + cmd.cmdidx = end_cmd; + cmd.cmdarg = end; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) + goto err_out; + + cmd.cmdidx = MMC_CMD_ERASE; + cmd.cmdarg = SECURE_ERASE; + cmd.resp_type = MMC_RSP_R1b; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) + goto err_out; + + return 0; + +err_out: + puts("mmc erase failed\n"); + return err; +} + +unsigned long mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt) +{ + int err = 0; + struct mmc *mmc = find_mmc_device(dev_num); + lbaint_t blk = 0, blk_r = 0; + int timeout = 1000; + + if (!mmc) + return -1; + + if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size)) + printf("\n\nCaution! Your devices Erase group is 0x%x\n" + "The erase range would be change to " + "0x" LBAF "~0x" LBAF "\n\n", + mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1), + ((start + blkcnt + mmc->erase_grp_size) + & ~(mmc->erase_grp_size - 1)) - 1); + + while (blk < blkcnt) { + blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ? + mmc->erase_grp_size : (blkcnt - blk); + err = mmc_erase_t(mmc, start + blk, blk_r); + if (err) + break; + + blk += blk_r; + + /* Waiting for the ready status */ + if (mmc_send_status(mmc, timeout)) + return 0; + } + + return blk; +} + +static ulong mmc_write_blocks(struct mmc *mmc, lbaint_t start, + lbaint_t blkcnt, const void *src) +{ + struct mmc_cmd cmd; + struct mmc_data data; + int timeout = 1000; + + if ((start + blkcnt) > mmc->block_dev.lba) { + printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n", + start + blkcnt, mmc->block_dev.lba); + return 0; + } + + if (blkcnt == 0) + return 0; + else if (blkcnt == 1) + cmd.cmdidx = MMC_CMD_WRITE_SINGLE_BLOCK; + else + cmd.cmdidx = MMC_CMD_WRITE_MULTIPLE_BLOCK; + + if (mmc->high_capacity) + cmd.cmdarg = start; + else + cmd.cmdarg = start * mmc->write_bl_len; + + cmd.resp_type = MMC_RSP_R1; + + data.src = src; + data.blocks = blkcnt; + data.blocksize = mmc->write_bl_len; + data.flags = MMC_DATA_WRITE; + + if (mmc_send_cmd(mmc, &cmd, &data)) { + printf("mmc write failed\n"); + return 0; + } + + /* SPI multiblock writes terminate using a special + * token, not a STOP_TRANSMISSION request. + */ + if (!mmc_host_is_spi(mmc) && blkcnt > 1) { + cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; + cmd.cmdarg = 0; + cmd.resp_type = MMC_RSP_R1b; + if (mmc_send_cmd(mmc, &cmd, NULL)) { + printf("mmc fail to send stop cmd\n"); + return 0; + } + } + + /* Waiting for the ready status */ + if (mmc_send_status(mmc, timeout)) + return 0; + + return blkcnt; +} + +ulong mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt, const void *src) +{ + lbaint_t cur, blocks_todo = blkcnt; + + struct mmc *mmc = find_mmc_device(dev_num); + if (!mmc) + return 0; + + if (mmc_set_blocklen(mmc, mmc->write_bl_len)) + return 0; + + do { + cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo; + if (mmc_write_blocks(mmc, start, cur, src) != cur) + return 0; + blocks_todo -= cur; + start += cur; + src += cur * mmc->write_bl_len; + } while (blocks_todo > 0); + + return blkcnt; +} diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 975b2c5ba4..d3a8b5303d 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -288,6 +288,30 @@ static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit) mmc_reg_out(&mmc_base->sysctl, bit, bit); + /* + * CMD(DAT) lines reset procedures are slightly different + * for OMAP3 and OMAP4(AM335x,OMAP5,DRA7xx). + * According to OMAP3 TRM: + * Set SRC(SRD) bit in MMCHS_SYSCTL register to 0x1 and wait until it + * returns to 0x0. + * According to OMAP4(AM335x,OMAP5,DRA7xx) TRMs, CMD(DATA) lines reset + * procedure steps must be as follows: + * 1. Initiate CMD(DAT) line reset by writing 0x1 to SRC(SRD) bit in + * MMCHS_SYSCTL register (SD_SYSCTL for AM335x). + * 2. Poll the SRC(SRD) bit until it is set to 0x1. + * 3. Wait until the SRC (SRD) bit returns to 0x0 + * (reset procedure is completed). + */ +#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \ + defined(CONFIG_AM33XX) + if (!(readl(&mmc_base->sysctl) & bit)) { + start = get_timer(0); + while (!(readl(&mmc_base->sysctl) & bit)) { + if (get_timer(0) - start > MAX_RETRY_MS) + return; + } + } +#endif start = get_timer(0); while ((readl(&mmc_base->sysctl) & bit) != 0) { if (get_timer(0) - start > MAX_RETRY_MS) { @@ -376,6 +400,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, } writel(cmd->cmdarg, &mmc_base->arg); + udelay(20); /* To fix "No status update" error on eMMC */ writel((cmd->cmdidx << 24) | flags, &mmc_base->cmd); start = get_timer(0); @@ -480,7 +505,7 @@ static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, unsigned int count; /* - * Start Polled Read + * Start Polled Write */ count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size; count /= 4; @@ -586,6 +611,8 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, { struct mmc *mmc = &hsmmc_dev[dev_index]; struct omap_hsmmc_data *priv_data = &hsmmc_dev_data[dev_index]; + uint host_caps_val = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS | + MMC_MODE_HC; sprintf(mmc->name, "OMAP SD/MMC"); mmc->send_cmd = mmc_send_cmd; @@ -600,11 +627,20 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, #ifdef OMAP_HSMMC2_BASE case 1: priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE; +#if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \ + defined(CONFIG_DRA7XX)) && defined(CONFIG_HSMMC2_8BIT) + /* Enable 8-bit interface for eMMC on OMAP4/5 or DRA7XX */ + host_caps_val |= MMC_MODE_8BIT; +#endif break; #endif #ifdef OMAP_HSMMC3_BASE case 2: priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE; +#if defined(CONFIG_DRA7XX) && defined(CONFIG_HSMMC3_8BIT) + /* Enable 8-bit interface for eMMC on DRA7XX */ + host_caps_val |= MMC_MODE_8BIT; +#endif break; #endif default: @@ -620,8 +656,7 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, mmc->getwp = omap_mmc_getwp; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; - mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS | - MMC_MODE_HC) & ~host_caps_mask; + mmc->host_caps = host_caps_val & ~host_caps_mask; mmc->f_min = 400000; diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c index 7f89403b43..40ff8739bf 100644 --- a/drivers/mmc/s5p_sdhci.c +++ b/drivers/mmc/s5p_sdhci.c @@ -72,7 +72,7 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width) host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR | - SDHCI_QUIRK_WAIT_SEND_CMD; + SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_USE_WIDE8; host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; host->version = sdhci_readw(host, SDHCI_HOST_VERSION); @@ -81,6 +81,8 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width) host->index = index; host->host_caps = MMC_MODE_HC; + if (bus_width == 8) + host->host_caps |= MMC_MODE_8BIT; return add_sdhci(host, 52000000, 400000); } diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 42619916e5..dfb2eeeb4d 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -68,10 +68,9 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data, unsigned int stat, rdy, mask, timeout, block = 0; #ifdef CONFIG_MMC_SDMA unsigned char ctrl; - ctrl = sdhci_readl(host, SDHCI_HOST_CONTROL); + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); ctrl &= ~SDHCI_CTRL_DMA_MASK; - ctrl |= SDHCI_CTRL_SDMA; - sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL); + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); #endif timeout = 1000000; @@ -254,7 +253,7 @@ static int sdhci_set_clock(struct mmc *mmc, unsigned int clock) if (clock == 0) return 0; - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) { + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) { /* Version 3.00 divisors must be a multiple of 2. */ if (mmc->f_max <= clock) div = 1; @@ -347,10 +346,11 @@ void sdhci_set_ios(struct mmc *mmc) ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); if (mmc->bus_width == 8) { ctrl &= ~SDHCI_CTRL_4BITBUS; - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) + if ((SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) || + (host->quirks & SDHCI_QUIRK_USE_WIDE8)) ctrl |= SDHCI_CTRL_8BITBUS; } else { - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) ctrl &= ~SDHCI_CTRL_8BITBUS; if (mmc->bus_width == 4) ctrl |= SDHCI_CTRL_4BITBUS; @@ -437,7 +437,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) if (max_clk) mmc->f_max = max_clk; else { - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) mmc->f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; else @@ -452,7 +452,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) if (min_clk) mmc->f_min = min_clk; else { - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_300; else mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_200; @@ -470,7 +470,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) mmc->voltages |= host->voltages; mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT; - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) { + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) { if (caps & SDHCI_CAN_DO_8BIT) mmc->host_caps |= MMC_MODE_8BIT; } diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c index c98867dc4a..381ec42864 100644 --- a/drivers/net/4xx_enet.c +++ b/drivers/net/4xx_enet.c @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ /*-----------------------------------------------------------------------------+ * diff --git a/drivers/net/npe/miiphy.c b/drivers/net/npe/miiphy.c index 07fcb60e9d..002fb8113b 100644 --- a/drivers/net/npe/miiphy.c +++ b/drivers/net/npe/miiphy.c @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs */ /*-----------------------------------------------------------------------------+ | diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 5936f9bd7f..60ed92d203 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -7,7 +7,7 @@ * Copyright 2010-2011 Freescale Semiconductor, Inc. * author Andy Fleming * - * Some code get from linux kenrel + * Some code copied from linux kernel * Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org> */ #include <miiphy.h> diff --git a/drivers/sound/max98095.c b/drivers/sound/max98095.c index d69db58dcd..febf4195ba 100644 --- a/drivers/sound/max98095.c +++ b/drivers/sound/max98095.c @@ -52,7 +52,7 @@ int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000, static int max98095_i2c_write(unsigned int reg, unsigned char data) { debug("%s: Write Addr : 0x%02X, Data : 0x%02X\n", - __func__, reg, data); + __func__, reg, data); return i2c_write(g_max98095_i2c_dev_addr, reg, 1, &data, 1); } @@ -71,7 +71,7 @@ static unsigned int max98095_i2c_read(unsigned int reg, unsigned char *data) ret = i2c_read(g_max98095_i2c_dev_addr, reg, 1, data, 1); if (ret != 0) { debug("%s: Error while reading register %#04x\n", - __func__, reg); + __func__, reg); return -1; } @@ -138,43 +138,57 @@ static int rate_value(int rate, u8 *value) * @return -1 for error and 0 Success. */ static int max98095_hw_params(struct max98095_priv *max98095, - unsigned int rate, unsigned int bits_per_sample) + enum en_max_audio_interface aif_id, + unsigned int rate, unsigned int bits_per_sample) { u8 regval; int error; + unsigned short M98095_DAI_CLKMODE; + unsigned short M98095_DAI_FORMAT; + unsigned short M98095_DAI_FILTERS; + + if (aif_id == AIF1) { + M98095_DAI_CLKMODE = M98095_027_DAI1_CLKMODE; + M98095_DAI_FORMAT = M98095_02A_DAI1_FORMAT; + M98095_DAI_FILTERS = M98095_02E_DAI1_FILTERS; + } else { + M98095_DAI_CLKMODE = M98095_031_DAI2_CLKMODE; + M98095_DAI_FORMAT = M98095_034_DAI2_FORMAT; + M98095_DAI_FILTERS = M98095_038_DAI2_FILTERS; + } switch (bits_per_sample) { case 16: - error = max98095_update_bits(M98095_034_DAI2_FORMAT, - M98095_DAI_WS, 0); + error = max98095_update_bits(M98095_DAI_FORMAT, + M98095_DAI_WS, 0); break; case 24: - error = max98095_update_bits(M98095_034_DAI2_FORMAT, - M98095_DAI_WS, M98095_DAI_WS); + error = max98095_update_bits(M98095_DAI_FORMAT, + M98095_DAI_WS, M98095_DAI_WS); break; default: debug("%s: Illegal bits per sample %d.\n", - __func__, bits_per_sample); + __func__, bits_per_sample); return -1; } if (rate_value(rate, ®val)) { debug("%s: Failed to set sample rate to %d.\n", - __func__, rate); + __func__, rate); return -1; } max98095->rate = rate; - error |= max98095_update_bits(M98095_031_DAI2_CLKMODE, - M98095_CLKMODE_MASK, regval); + error |= max98095_update_bits(M98095_DAI_CLKMODE, + M98095_CLKMODE_MASK, regval); /* Update sample rate mode */ if (rate < 50000) - error |= max98095_update_bits(M98095_038_DAI2_FILTERS, - M98095_DAI_DHF, 0); + error |= max98095_update_bits(M98095_DAI_FILTERS, + M98095_DAI_DHF, 0); else - error |= max98095_update_bits(M98095_038_DAI2_FILTERS, - M98095_DAI_DHF, M98095_DAI_DHF); + error |= max98095_update_bits(M98095_DAI_FILTERS, + M98095_DAI_DHF, M98095_DAI_DHF); if (error < 0) { debug("%s: Error setting hardware params.\n", __func__); @@ -193,7 +207,7 @@ static int max98095_hw_params(struct max98095_priv *max98095, * @return -1 for error and 0 success. */ static int max98095_set_sysclk(struct max98095_priv *max98095, - unsigned int freq) + unsigned int freq) { int error = 0; @@ -235,22 +249,39 @@ static int max98095_set_sysclk(struct max98095_priv *max98095, * * @return -1 for error and 0 Success. */ -static int max98095_set_fmt(struct max98095_priv *max98095, int fmt) +static int max98095_set_fmt(struct max98095_priv *max98095, int fmt, + enum en_max_audio_interface aif_id) { u8 regval = 0; int error = 0; + unsigned short M98095_DAI_CLKCFG_HI; + unsigned short M98095_DAI_CLKCFG_LO; + unsigned short M98095_DAI_FORMAT; + unsigned short M98095_DAI_CLOCK; if (fmt == max98095->fmt) return 0; max98095->fmt = fmt; + if (aif_id == AIF1) { + M98095_DAI_CLKCFG_HI = M98095_028_DAI1_CLKCFG_HI; + M98095_DAI_CLKCFG_LO = M98095_029_DAI1_CLKCFG_LO; + M98095_DAI_FORMAT = M98095_02A_DAI1_FORMAT; + M98095_DAI_CLOCK = M98095_02B_DAI1_CLOCK; + } else { + M98095_DAI_CLKCFG_HI = M98095_032_DAI2_CLKCFG_HI; + M98095_DAI_CLKCFG_LO = M98095_033_DAI2_CLKCFG_LO; + M98095_DAI_FORMAT = M98095_034_DAI2_FORMAT; + M98095_DAI_CLOCK = M98095_035_DAI2_CLOCK; + } + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBS_CFS: /* Slave mode PLL */ - error |= max98095_i2c_write(M98095_032_DAI2_CLKCFG_HI, + error |= max98095_i2c_write(M98095_DAI_CLKCFG_HI, 0x80); - error |= max98095_i2c_write(M98095_033_DAI2_CLKCFG_LO, + error |= max98095_i2c_write(M98095_DAI_CLKCFG_LO, 0x00); break; case SND_SOC_DAIFMT_CBM_CFM: @@ -292,12 +323,13 @@ static int max98095_set_fmt(struct max98095_priv *max98095, int fmt) return -1; } - error |= max98095_update_bits(M98095_034_DAI2_FORMAT, - M98095_DAI_MAS | M98095_DAI_DLY | M98095_DAI_BCI | - M98095_DAI_WCI, regval); + error |= max98095_update_bits(M98095_DAI_FORMAT, + M98095_DAI_MAS | M98095_DAI_DLY | + M98095_DAI_BCI | M98095_DAI_WCI, + regval); - error |= max98095_i2c_write(M98095_035_DAI2_CLOCK, - M98095_DAI_BSEL64); + error |= max98095_i2c_write(M98095_DAI_CLOCK, + M98095_DAI_BSEL64); if (error < 0) { debug("%s: Error setting i2s format.\n", __func__); @@ -354,7 +386,8 @@ static int max98095_reset(void) * * @returns -1 for error and 0 Success. */ -static int max98095_device_init(struct max98095_priv *max98095) +static int max98095_device_init(struct max98095_priv *max98095, + enum en_max_audio_interface aif_id) { unsigned char id; int error = 0; @@ -374,7 +407,7 @@ static int max98095_device_init(struct max98095_priv *max98095) error = max98095_i2c_read(M98095_0FF_REV_ID, &id); if (error < 0) { debug("%s: Failure reading hardware revision: %d\n", - __func__, id); + __func__, id); goto err_access; } debug("%s: Hardware revision: %c\n", __func__, (id - 0x40) + 'A'); @@ -385,26 +418,28 @@ static int max98095_device_init(struct max98095_priv *max98095) * initialize registers to hardware default configuring audio * interface2 to DAC */ - error |= max98095_i2c_write(M98095_048_MIX_DAC_LR, - M98095_DAI2M_TO_DACL|M98095_DAI2M_TO_DACR); + if (aif_id == AIF1) + error |= max98095_i2c_write(M98095_048_MIX_DAC_LR, + M98095_DAI1L_TO_DACL | + M98095_DAI1R_TO_DACR); + else + error |= max98095_i2c_write(M98095_048_MIX_DAC_LR, + M98095_DAI2M_TO_DACL | + M98095_DAI2M_TO_DACR); error |= max98095_i2c_write(M98095_092_PWR_EN_OUT, - M98095_SPK_SPREADSPECTRUM); - error |= max98095_i2c_write(M98095_045_CFG_DSP, M98095_DSPNORMAL); + M98095_SPK_SPREADSPECTRUM); error |= max98095_i2c_write(M98095_04E_CFG_HP, M98095_HPNORMAL); - - error |= max98095_i2c_write(M98095_02C_DAI1_IOCFG, - M98095_S1NORMAL|M98095_SDATA); - - error |= max98095_i2c_write(M98095_036_DAI2_IOCFG, - M98095_S2NORMAL|M98095_SDATA); - - error |= max98095_i2c_write(M98095_040_DAI3_IOCFG, - M98095_S3NORMAL|M98095_SDATA); + if (aif_id == AIF1) + error |= max98095_i2c_write(M98095_02C_DAI1_IOCFG, + M98095_S1NORMAL | M98095_SDATA); + else + error |= max98095_i2c_write(M98095_036_DAI2_IOCFG, + M98095_S2NORMAL | M98095_SDATA); /* take the codec out of the shut down */ error |= max98095_update_bits(M98095_097_PWR_SYS, M98095_SHDNRUN, - M98095_SHDNRUN); + M98095_SHDNRUN); /* route DACL and DACR output to HO and Spekers */ error |= max98095_i2c_write(M98095_050_MIX_SPK_LEFT, 0x01); /* DACL */ error |= max98095_i2c_write(M98095_051_MIX_SPK_RIGHT, 0x01);/* DACR */ @@ -422,7 +457,10 @@ static int max98095_device_init(struct max98095_priv *max98095) /* Enable DAIs */ error |= max98095_i2c_write(M98095_093_BIAS_CTRL, 0x30); - error |= max98095_i2c_write(M98095_096_PWR_DAC_CK, 0x07); + if (aif_id == AIF1) + error |= max98095_i2c_write(M98095_096_PWR_DAC_CK, 0x01); + else + error |= max98095_i2c_write(M98095_096_PWR_DAC_CK, 0x07); err_access: if (error < 0) @@ -432,8 +470,9 @@ err_access: } static int max98095_do_init(struct sound_codec_info *pcodec_info, - int sampling_rate, int mclk_freq, - int bits_per_sample) + enum en_max_audio_interface aif_id, + int sampling_rate, int mclk_freq, + int bits_per_sample) { int ret = 0; @@ -443,15 +482,15 @@ static int max98095_do_init(struct sound_codec_info *pcodec_info, /* shift the device address by 1 for 7 bit addressing */ g_max98095_i2c_dev_addr = pcodec_info->i2c_dev_addr >> 1; - if (pcodec_info->codec_type == CODEC_MAX_98095) + if (pcodec_info->codec_type == CODEC_MAX_98095) { g_max98095_info.devtype = MAX98095; - else { + } else { debug("%s: Codec id [%d] not defined\n", __func__, - pcodec_info->codec_type); + pcodec_info->codec_type); return -1; } - ret = max98095_device_init(&g_max98095_info); + ret = max98095_device_init(&g_max98095_info, aif_id); if (ret < 0) { debug("%s: max98095 codec chip init failed\n", __func__); return ret; @@ -463,14 +502,15 @@ static int max98095_do_init(struct sound_codec_info *pcodec_info, return ret; } - ret = max98095_hw_params(&g_max98095_info, sampling_rate, - bits_per_sample); + ret = max98095_hw_params(&g_max98095_info, aif_id, sampling_rate, + bits_per_sample); if (ret == 0) { ret = max98095_set_fmt(&g_max98095_info, - SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS); + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS, + aif_id); } return ret; @@ -529,8 +569,9 @@ static int get_max98095_codec_values(struct sound_codec_info *pcodec_info, } /* max98095 Device Initialisation */ -int max98095_init(const void *blob, int sampling_rate, int mclk_freq, - int bits_per_sample) +int max98095_init(const void *blob, enum en_max_audio_interface aif_id, + int sampling_rate, int mclk_freq, + int bits_per_sample) { int ret; int old_bus = i2c_get_bus_num(); @@ -538,12 +579,12 @@ int max98095_init(const void *blob, int sampling_rate, int mclk_freq, if (get_max98095_codec_values(pcodec_info, blob) < 0) { debug("FDT Codec values failed\n"); - return -1; + return -1; } i2c_set_bus_num(pcodec_info->i2c_bus); - ret = max98095_do_init(pcodec_info, sampling_rate, mclk_freq, - bits_per_sample); + ret = max98095_do_init(pcodec_info, aif_id, sampling_rate, mclk_freq, + bits_per_sample); i2c_set_bus_num(old_bus); return ret; diff --git a/drivers/sound/max98095.h b/drivers/sound/max98095.h index ae5eb14dbb..44b1e3a97b 100644 --- a/drivers/sound/max98095.h +++ b/drivers/sound/max98095.h @@ -11,6 +11,12 @@ #ifndef _MAX98095_H #define _MAX98095_H +/* Available audio interface ports in wm8994 codec */ +enum en_max_audio_interface { + AIF1 = 1, + AIF2, +}; + /* * MAX98095 Registers Definition */ @@ -305,7 +311,7 @@ * * @returns -1 for error and 0 Success. */ -int max98095_init(const void *blob, int sampling_rate, int mclk_freq, - int bits_per_sample); +int max98095_init(const void *blob, enum en_max_audio_interface aif_id, + int sampling_rate, int mclk_freq, int bits_per_sample); #endif diff --git a/drivers/sound/samsung-i2s.c b/drivers/sound/samsung-i2s.c index 49921e5526..47f155f85d 100644 --- a/drivers/sound/samsung-i2s.c +++ b/drivers/sound/samsung-i2s.c @@ -65,9 +65,7 @@ static void i2s_txctrl(struct i2s_reg *i2s_reg, int on) if (on) { con |= CON_ACTIVE; con &= ~CON_TXCH_PAUSE; - } else { - con |= CON_TXCH_PAUSE; con &= ~CON_ACTIVE; } @@ -172,7 +170,7 @@ int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt) break; default: debug("%s: Invalid format priority [0x%x]\n", __func__, - (fmt & SND_SOC_DAIFMT_FORMAT_MASK)); + (fmt & SND_SOC_DAIFMT_FORMAT_MASK)); return -1; } @@ -191,7 +189,7 @@ int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt) break; default: debug("%s: Invalid clock ploarity input [0x%x]\n", __func__, - (fmt & SND_SOC_DAIFMT_INV_MASK)); + (fmt & SND_SOC_DAIFMT_INV_MASK)); return -1; } @@ -209,7 +207,7 @@ int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt) break; default: debug("%s: Invalid master selection [0x%x]\n", __func__, - (fmt & SND_SOC_DAIFMT_MASTER_MASK)); + (fmt & SND_SOC_DAIFMT_MASTER_MASK)); return -1; } @@ -250,7 +248,7 @@ int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc) break; default: debug("%s: Invalid sample size input [0x%x]\n", - __func__, blc); + __func__, blc); return -1; } writel(mod, &i2s_reg->mod); @@ -301,27 +299,58 @@ int i2s_tx_init(struct i2stx_info *pi2s_tx) int ret; struct i2s_reg *i2s_reg = (struct i2s_reg *)pi2s_tx->base_address; + if (pi2s_tx->id == 0) { + /* Initialize GPIO for I2S-0 */ + exynos_pinmux_config(PERIPH_ID_I2S0, 0); + + /* Set EPLL Clock */ + ret = set_epll_clk(pi2s_tx->samplingrate * pi2s_tx->rfs * 4); + } else if (pi2s_tx->id == 1) { + /* Initialize GPIO for I2S-1 */ + exynos_pinmux_config(PERIPH_ID_I2S1, 0); + + /* Set EPLL Clock */ + ret = set_epll_clk(pi2s_tx->audio_pll_clk); + } else { + debug("%s: unsupported i2s-%d bus\n", __func__, pi2s_tx->id); + return -1; + } - /* Initialize GPIO for I2s */ - exynos_pinmux_config(PERIPH_ID_I2S1, 0); - - /* Set EPLL Clock */ - ret = set_epll_clk(pi2s_tx->audio_pll_clk); if (ret != 0) { - debug("%s: epll clock set rate falied\n", __func__); + debug("%s: epll clock set rate failed\n", __func__); return -1; } - /* Select Clk Source for Audio1 */ - set_i2s_clk_source(); + /* Select Clk Source for Audio 0 or 1 */ + ret = set_i2s_clk_source(pi2s_tx->id); + if (ret == -1) { + debug("%s: unsupported clock for i2s-%d\n", __func__, + pi2s_tx->id); + return -1; + } + + if (pi2s_tx->id == 0) { + /*Reset the i2s module */ + writel(CON_RESET, &i2s_reg->con); - /* Set Prescaler to get MCLK */ - set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk, - (pi2s_tx->samplingrate * (pi2s_tx->rfs))); + writel(MOD_OP_CLK | MOD_RCLKSRC, &i2s_reg->mod); + /* set i2s prescaler */ + writel(PSREN | PSVAL, &i2s_reg->psr); + } else { + /* Set Prescaler to get MCLK */ + ret = set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk, + (pi2s_tx->samplingrate * (pi2s_tx->rfs)), + pi2s_tx->id); + } + if (ret == -1) { + debug("%s: unsupported prescalar for i2s-%d\n", __func__, + pi2s_tx->id); + return -1; + } /* Configure I2s format */ ret = i2s_set_fmt(i2s_reg, (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM)); + SND_SOC_DAIFMT_CBM_CFM)); if (ret == 0) { i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs); ret = i2s_set_samplesize(i2s_reg, pi2s_tx->bitspersample); diff --git a/drivers/sound/sound.c b/drivers/sound/sound.c index 6fcc75da58..9b8ce5a9ef 100644 --- a/drivers/sound/sound.c +++ b/drivers/sound/sound.c @@ -36,8 +36,7 @@ static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob) int error = 0; int base; - node = fdtdec_next_compatible(blob, 0, - COMPAT_SAMSUNG_EXYNOS5_SOUND); + node = fdt_path_offset(blob, "i2s"); if (node <= 0) { debug("EXYNOS_SOUND: No node for sound in device tree\n"); return -1; @@ -80,6 +79,11 @@ static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob) node, "samsung,i2s-bit-clk-framesize", -1); error |= i2s->bfs; debug("bfs = %d\n", i2s->bfs); + + i2s->id = fdtdec_get_int(blob, node, "samsung,i2s-id", -1); + error |= i2s->id; + debug("id = %d\n", i2s->id); + if (error == -1) { debug("fail to get sound i2s node properties\n"); return -1; @@ -92,6 +96,7 @@ static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob) i2s->channels = I2S_CHANNELS; i2s->rfs = I2S_RFS; i2s->bfs = I2S_BFS; + i2s->id = 0; #endif return 0; } @@ -111,7 +116,7 @@ static int codec_init(const void *blob, struct i2stx_info *pi2s_tx) int node; /* Get the node from FDT for sound */ - node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SOUND); + node = fdt_path_offset(blob, "i2s"); if (node <= 0) { debug("EXYNOS_SOUND: No node for sound in device tree\n"); debug("node = %d\n", node); @@ -130,14 +135,15 @@ static int codec_init(const void *blob, struct i2stx_info *pi2s_tx) #endif if (!strcmp(codectype, "wm8994")) { /* Check the codec type and initialise the same */ - ret = wm8994_init(blob, WM8994_AIF2, - pi2s_tx->samplingrate, - (pi2s_tx->samplingrate * (pi2s_tx->rfs)), - pi2s_tx->bitspersample, pi2s_tx->channels); + ret = wm8994_init(blob, pi2s_tx->id + 1, + pi2s_tx->samplingrate, + (pi2s_tx->samplingrate * (pi2s_tx->rfs)), + pi2s_tx->bitspersample, pi2s_tx->channels); } else if (!strcmp(codectype, "max98095")) { - ret = max98095_init(blob, pi2s_tx->samplingrate, - (pi2s_tx->samplingrate * (pi2s_tx->rfs)), - pi2s_tx->bitspersample); + ret = max98095_init(blob, pi2s_tx->id + 1, + pi2s_tx->samplingrate, + (pi2s_tx->samplingrate * (pi2s_tx->rfs)), + pi2s_tx->bitspersample); } else { debug("%s: Unknown codec type %s\n", __func__, codectype); return -1; @@ -230,7 +236,7 @@ int sound_play(uint32_t msec, uint32_t frequency) } sound_prepare_buffer((unsigned short *)data, - data_size / sizeof(unsigned short), frequency); + data_size / sizeof(unsigned short), frequency); while (msec >= 1000) { ret = i2s_transfer_tx_data(&g_i2stx_pri, data, diff --git a/drivers/sound/wm8994.c b/drivers/sound/wm8994.c index 37e354c5c8..f8e9a6eadd 100644 --- a/drivers/sound/wm8994.c +++ b/drivers/sound/wm8994.c @@ -432,12 +432,12 @@ static int configure_aif_clock(struct wm8994_priv *wm8994, int aif) int ret; /* AIF(1/0) register adress offset calculated */ - if (aif) + if (aif-1) offset = 4; else offset = 0; - switch (wm8994->sysclk[aif]) { + switch (wm8994->sysclk[aif-1]) { case WM8994_SYSCLK_MCLK1: reg1 |= SEL_MCLK1; rate = wm8994->mclk[0]; @@ -460,7 +460,7 @@ static int configure_aif_clock(struct wm8994_priv *wm8994, int aif) default: debug("%s: Invalid input clock selection [%d]\n", - __func__, wm8994->sysclk[aif]); + __func__, wm8994->sysclk[aif-1]); return -1; } @@ -470,13 +470,18 @@ static int configure_aif_clock(struct wm8994_priv *wm8994, int aif) reg1 |= WM8994_AIF1CLK_DIV; } - wm8994->aifclk[aif] = rate; + wm8994->aifclk[aif-1] = rate; ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_1 + offset, WM8994_AIF1CLK_SRC_MASK | WM8994_AIF1CLK_DIV, reg1); - ret |= wm8994_update_bits(WM8994_CLOCKING_1, + if (aif == WM8994_AIF1) + ret |= wm8994_update_bits(WM8994_CLOCKING_1, + WM8994_AIF1DSPCLK_ENA_MASK | WM8994_SYSDSPCLK_ENA_MASK, + WM8994_AIF1DSPCLK_ENA | WM8994_SYSDSPCLK_ENA); + else if (aif == WM8994_AIF2) + ret |= wm8994_update_bits(WM8994_CLOCKING_1, WM8994_SYSCLK_SRC | WM8994_AIF2DSPCLK_ENA_MASK | WM8994_SYSDSPCLK_ENA_MASK, WM8994_SYSCLK_SRC | WM8994_AIF2DSPCLK_ENA | WM8994_SYSDSPCLK_ENA); @@ -536,7 +541,7 @@ static int wm8994_set_sysclk(struct wm8994_priv *wm8994, int aif_id, break; if (i == ARRAY_SIZE(opclk_divs)) { debug("%s frequency divisor not found\n", - __func__); + __func__); return -1; } ret = wm8994_update_bits(WM8994_CLOCKING_2, @@ -554,7 +559,7 @@ static int wm8994_set_sysclk(struct wm8994_priv *wm8994, int aif_id, return -1; } - ret |= configure_aif_clock(wm8994, aif_id - 1); + ret |= configure_aif_clock(wm8994, aif_id); if (ret < 0) { debug("%s: codec register access error\n", __func__); @@ -608,13 +613,46 @@ static int wm8994_init_volume_aif2_dac1(void) } /* + * Initializes Volume for AIF1 to HP path + * + * @returns -1 for error and 0 Success. + * + */ +static int wm8994_init_volume_aif1_dac1(void) +{ + int ret = 0; + + /* Unmute AIF1DAC */ + ret |= wm8994_i2c_write(WM8994_AIF1_DAC_FILTERS_1, 0x0000); + + ret |= wm8994_update_bits(WM8994_DAC1_LEFT_VOLUME, + WM8994_DAC1_VU_MASK | WM8994_DAC1L_VOL_MASK | + WM8994_DAC1L_MUTE_MASK, WM8994_DAC1_VU | 0xc0); + + ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_VOLUME, + WM8994_DAC1_VU_MASK | WM8994_DAC1R_VOL_MASK | + WM8994_DAC1R_MUTE_MASK, WM8994_DAC1_VU | 0xc0); + /* Head Phone Volume */ + ret |= wm8994_i2c_write(WM8994_LEFT_OUTPUT_VOLUME, 0x12D); + ret |= wm8994_i2c_write(WM8994_RIGHT_OUTPUT_VOLUME, 0x12D); + + if (ret < 0) { + debug("%s: codec register access error\n", __func__); + return -1; + } + + return 0; +} + +/* * Intialise wm8994 codec device * * @param wm8994 wm8994 information * * @returns -1 for error and 0 Success. */ -static int wm8994_device_init(struct wm8994_priv *wm8994) +static int wm8994_device_init(struct wm8994_priv *wm8994, + enum en_audio_interface aif_id) { const char *devname; unsigned short reg_data; @@ -661,13 +699,30 @@ static int wm8994_device_init(struct wm8994_priv *wm8994) ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1, WM8994_HPOUT1R_ENA_MASK, WM8994_HPOUT1R_ENA); - /* Power enable for AIF2 and DAC1 */ - ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_5, - WM8994_AIF2DACL_ENA_MASK | WM8994_AIF2DACR_ENA_MASK | - WM8994_DAC1L_ENA_MASK | WM8994_DAC1R_ENA_MASK, - WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA | WM8994_DAC1L_ENA | - WM8994_DAC1R_ENA); - + if (aif_id == WM8994_AIF1) { + ret |= wm8994_i2c_write(WM8994_POWER_MANAGEMENT_2, + WM8994_TSHUT_ENA | WM8994_MIXINL_ENA | + WM8994_MIXINR_ENA | WM8994_IN2L_ENA | + WM8994_IN2R_ENA); + + ret |= wm8994_i2c_write(WM8994_POWER_MANAGEMENT_4, + WM8994_ADCL_ENA | WM8994_ADCR_ENA | + WM8994_AIF1ADC1R_ENA | + WM8994_AIF1ADC1L_ENA); + + /* Power enable for AIF1 and DAC1 */ + ret |= wm8994_i2c_write(WM8994_POWER_MANAGEMENT_5, + WM8994_AIF1DACL_ENA | + WM8994_AIF1DACR_ENA | + WM8994_DAC1L_ENA | WM8994_DAC1R_ENA); + } else if (aif_id == WM8994_AIF2) { + /* Power enable for AIF2 and DAC1 */ + ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_5, + WM8994_AIF2DACL_ENA_MASK | WM8994_AIF2DACR_ENA_MASK | + WM8994_DAC1L_ENA_MASK | WM8994_DAC1R_ENA_MASK, + WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA | + WM8994_DAC1L_ENA | WM8994_DAC1R_ENA); + } /* Head Phone Initialisation */ ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1, WM8994_HPOUT1L_DLY_MASK | WM8994_HPOUT1R_DLY_MASK, @@ -695,35 +750,49 @@ static int wm8994_device_init(struct wm8994_priv *wm8994) ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_2, WM8994_DAC1R_TO_HPOUT1R_MASK, WM8994_DAC1R_TO_HPOUT1R); - /* Routing AIF2 to DAC1 */ - ret |= wm8994_update_bits(WM8994_DAC1_LEFT_MIXER_ROUTING, - WM8994_AIF2DACL_TO_DAC1L_MASK, - WM8994_AIF2DACL_TO_DAC1L); - - ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_MIXER_ROUTING, - WM8994_AIF2DACR_TO_DAC1R_MASK, - WM8994_AIF2DACR_TO_DAC1R); - - /* GPIO Settings for AIF2 */ - /* B CLK */ - ret |= wm8994_update_bits(WM8994_GPIO_3, WM8994_GPIO_DIR_MASK | - WM8994_GPIO_FUNCTION_MASK , - WM8994_GPIO_DIR_OUTPUT | - WM8994_GPIO_FUNCTION_I2S_CLK); - - /* LR CLK */ - ret |= wm8994_update_bits(WM8994_GPIO_4, WM8994_GPIO_DIR_MASK | - WM8994_GPIO_FUNCTION_MASK, - WM8994_GPIO_DIR_OUTPUT | - WM8994_GPIO_FUNCTION_I2S_CLK); - - /* DATA */ - ret |= wm8994_update_bits(WM8994_GPIO_5, WM8994_GPIO_DIR_MASK | - WM8994_GPIO_FUNCTION_MASK, - WM8994_GPIO_DIR_OUTPUT | - WM8994_GPIO_FUNCTION_I2S_CLK); - - ret |= wm8994_init_volume_aif2_dac1(); + if (aif_id == WM8994_AIF1) { + /* Routing AIF1 to DAC1 */ + ret |= wm8994_i2c_write(WM8994_DAC1_LEFT_MIXER_ROUTING, + WM8994_AIF1DAC1L_TO_DAC1L); + + ret |= wm8994_i2c_write(WM8994_DAC1_RIGHT_MIXER_ROUTING, + WM8994_AIF1DAC1R_TO_DAC1R); + + /* GPIO Settings for AIF1 */ + ret |= wm8994_i2c_write(WM8994_GPIO_1, WM8994_GPIO_DIR_OUTPUT + | WM8994_GPIO_FUNCTION_I2S_CLK + | WM8994_GPIO_INPUT_DEBOUNCE); + + ret |= wm8994_init_volume_aif1_dac1(); + } else if (aif_id == WM8994_AIF2) { + /* Routing AIF2 to DAC1 */ + ret |= wm8994_update_bits(WM8994_DAC1_LEFT_MIXER_ROUTING, + WM8994_AIF2DACL_TO_DAC1L_MASK, + WM8994_AIF2DACL_TO_DAC1L); + + ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_MIXER_ROUTING, + WM8994_AIF2DACR_TO_DAC1R_MASK, + WM8994_AIF2DACR_TO_DAC1R); + + /* GPIO Settings for AIF2 */ + /* B CLK */ + ret |= wm8994_update_bits(WM8994_GPIO_3, WM8994_GPIO_DIR_MASK | + WM8994_GPIO_FUNCTION_MASK , + WM8994_GPIO_DIR_OUTPUT); + + /* LR CLK */ + ret |= wm8994_update_bits(WM8994_GPIO_4, WM8994_GPIO_DIR_MASK | + WM8994_GPIO_FUNCTION_MASK, + WM8994_GPIO_DIR_OUTPUT); + + /* DATA */ + ret |= wm8994_update_bits(WM8994_GPIO_5, WM8994_GPIO_DIR_MASK | + WM8994_GPIO_FUNCTION_MASK, + WM8994_GPIO_DIR_OUTPUT); + + ret |= wm8994_init_volume_aif2_dac1(); + } + if (ret < 0) goto err; @@ -795,7 +864,7 @@ static int get_codec_values(struct sound_codec_info *pcodec_info, return 0; } -/*wm8994 Device Initialisation */ +/* WM8994 Device Initialisation */ int wm8994_init(const void *blob, enum en_audio_interface aif_id, int sampling_rate, int mclk_freq, int bits_per_sample, unsigned int channels) @@ -813,15 +882,15 @@ int wm8994_init(const void *blob, enum en_audio_interface aif_id, g_wm8994_i2c_dev_addr = pcodec_info->i2c_dev_addr; wm8994_i2c_init(pcodec_info->i2c_bus); - if (pcodec_info->codec_type == CODEC_WM_8994) + if (pcodec_info->codec_type == CODEC_WM_8994) { g_wm8994_info.type = WM8994; - else { + } else { debug("%s: Codec id [%d] not defined\n", __func__, - pcodec_info->codec_type); + pcodec_info->codec_type); return -1; } - ret = wm8994_device_init(&g_wm8994_info); + ret = wm8994_device_init(&g_wm8994_info, aif_id); if (ret < 0) { debug("%s: wm8994 codec chip init failed\n", __func__); return ret; diff --git a/drivers/sound/wm8994_registers.h b/drivers/sound/wm8994_registers.h index 1e987c2fd1..0aba2fdfd8 100644 --- a/drivers/sound/wm8994_registers.h +++ b/drivers/sound/wm8994_registers.h @@ -13,6 +13,7 @@ #define WM8994_SOFTWARE_RESET 0x00 #define WM8994_POWER_MANAGEMENT_1 0x01 #define WM8994_POWER_MANAGEMENT_2 0x02 +#define WM8994_POWER_MANAGEMENT_4 0x04 #define WM8994_POWER_MANAGEMENT_5 0x05 #define WM8994_LEFT_OUTPUT_VOLUME 0x1C #define WM8994_RIGHT_OUTPUT_VOLUME 0x1D @@ -38,6 +39,7 @@ #define WM8994_AIF2_CONTROL_2 0x311 #define WM8994_AIF2_MASTER_SLAVE 0x312 #define WM8994_AIF2_BCLK 0x313 +#define WM8994_AIF1_DAC_FILTERS_1 0x420 #define WM8994_AIF2_DAC_LEFT_VOLUME 0x502 #define WM8994_AIF2_DAC_RIGHT_VOLUME 0x503 #define WM8994_AIF2_DAC_FILTERS_1 0x520 @@ -45,6 +47,7 @@ #define WM8994_DAC1_RIGHT_MIXER_ROUTING 0x602 #define WM8994_DAC1_LEFT_VOLUME 0x610 #define WM8994_DAC1_RIGHT_VOLUME 0x611 +#define WM8994_GPIO_1 0x700 #define WM8994_GPIO_3 0x702 #define WM8994_GPIO_4 0x703 #define WM8994_GPIO_5 0x704 @@ -82,6 +85,20 @@ /* OPCLK_ENA */ #define WM8994_OPCLK_ENA 0x0800 +#define WM8994_TSHUT_ENA 0x4000 +#define WM8994_MIXINL_ENA 0x0200 +#define WM8994_MIXINR_ENA 0x0100 +#define WM8994_IN2L_ENA 0x0080 +#define WM8994_IN2R_ENA 0x0020 + +/* + * R5 (0x04) - Power Management (4) + */ +#define WM8994_ADCL_ENA 0x0001 +#define WM8994_ADCR_ENA 0x0002 +#define WM8994_AIF1ADC1R_ENA 0x0100 +#define WM8994_AIF1ADC1L_ENA 0x0200 + /* * R5 (0x05) - Power Management (5) */ @@ -91,6 +108,12 @@ /* AIF2DACR_ENA */ #define WM8994_AIF2DACR_ENA 0x1000 #define WM8994_AIF2DACR_ENA_MASK 0x1000 +/* AIF1DACL_ENA */ +#define WM8994_AIF1DACL_ENA 0x0200 +#define WM8994_AIF1DACL_ENA_MASK 0x0200 +/* AIF1DACR_ENA */ +#define WM8994_AIF1DACR_ENA 0x0100 +#define WM8994_AIF1DACR_ENA_MASK 0x0100 /* DAC1L_ENA */ #define WM8994_DAC1L_ENA 0x0002 #define WM8994_DAC1L_ENA_MASK 0x0002 @@ -170,6 +193,9 @@ /* * R520 (0x208) - Clocking (1) */ +/* AIF1DSPCLK_ENA */ +#define WM8994_AIF1DSPCLK_ENA 0x0008 +#define WM8994_AIF1DSPCLK_ENA_MASK 0x0008 /* AIF2DSPCLK_ENA */ #define WM8994_AIF2DSPCLK_ENA 0x0004 #define WM8994_AIF2DSPCLK_ENA_MASK 0x0004 @@ -254,6 +280,8 @@ /* AIF2DACL_TO_DAC1L */ #define WM8994_AIF2DACL_TO_DAC1L 0x0004 #define WM8994_AIF2DACL_TO_DAC1L_MASK 0x0004 +/* AIF1DAC1L_TO_DAC1L */ +#define WM8994_AIF1DAC1L_TO_DAC1L 0x0001 /* * R1538 (0x602) - DAC1 Right Mixer Routing @@ -261,6 +289,8 @@ /* AIF2DACR_TO_DAC1R */ #define WM8994_AIF2DACR_TO_DAC1R 0x0004 #define WM8994_AIF2DACR_TO_DAC1R_MASK 0x0004 +/* AIF1DAC1R_TO_DAC1R */ +#define WM8994_AIF1DAC1R_TO_DAC1R 0x0001 /* * R1552 (0x610) - DAC1 Left Volume @@ -285,11 +315,12 @@ * GPIO */ /* OUTPUT PIN */ -#define WM8994_GPIO_DIR_OUTPUT 0x8000 +#define WM8994_GPIO_DIR_OUTPUT 0x8000 /* GPIO PIN MASK */ -#define WM8994_GPIO_DIR_MASK 0xFFE0 +#define WM8994_GPIO_DIR_MASK 0xFFE0 /* I2S CLK */ -#define WM8994_GPIO_FUNCTION_I2S_CLK 0x0000 +#define WM8994_GPIO_FUNCTION_I2S_CLK 0x0001 +#define WM8994_GPIO_INPUT_DEBOUNCE 0x0100 /* GPn FN */ -#define WM8994_GPIO_FUNCTION_MASK 0x001F +#define WM8994_GPIO_FUNCTION_MASK 0x001F #endif diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c index 3cf7142f5a..2b9f395a97 100644 --- a/drivers/spi/mxs_spi.c +++ b/drivers/spi/mxs_spi.c @@ -56,8 +56,6 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { struct mxs_spi_slave *mxs_slave; - struct mxs_ssp_regs *ssp_regs; - int reg; if (!spi_cs_is_valid(bus, cs)) { printf("mxs_spi: invalid bus %d / chip select %d\n", bus, cs); @@ -74,13 +72,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, mxs_slave->max_khz = max_hz / 1000; mxs_slave->mode = mode; mxs_slave->regs = mxs_ssp_regs_by_bus(bus); - ssp_regs = mxs_slave->regs; - reg = readl(&ssp_regs->hw_ssp_ctrl0); - reg &= ~(MXS_SSP_CHIPSELECT_MASK); - reg |= cs << MXS_SSP_CHIPSELECT_SHIFT; - - writel(reg, &ssp_regs->hw_ssp_ctrl0); return &mxs_slave->slave; err_init: @@ -102,7 +94,9 @@ int spi_claim_bus(struct spi_slave *slave) mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); - writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0); + writel((slave->cs << MXS_SSP_CHIPSELECT_SHIFT) | + SSP_CTRL0_BUS_WIDTH_ONE_BIT, + &ssp_regs->hw_ssp_ctrl0); reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS; reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0; diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 4c2a39a216..1590c4a750 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -18,10 +18,12 @@ endif # new USB gadget layer dependencies ifdef CONFIG_USB_GADGET +COBJS-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o COBJS-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o COBJS-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o COBJS-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o COBJS-$(CONFIG_DFU_FUNCTION) += f_dfu.o +COBJS-$(CONFIG_USB_GADGET_MASS_STORAGE) += f_mass_storage.o endif ifdef CONFIG_USB_ETHER COBJS-y += ether.o diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c new file mode 100644 index 0000000000..c99208d102 --- /dev/null +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -0,0 +1,1306 @@ +/* + * Driver for the Atmel USBA high speed USB device controller + * [Original from Linux kernel: drivers/usb/gadget/atmel_usba_udc.c] + * + * Copyright (C) 2005-2013 Atmel Corporation + * Bo Shen <voice.shen@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/hardware.h> +#include <linux/list.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/atmel_usba_udc.h> +#include <malloc.h> +#include <usb/lin_gadget_compat.h> + +#include "atmel_usba_udc.h" + +static int vbus_is_present(struct usba_udc *udc) +{ + /* No Vbus detection: Assume always present */ + return 1; +} + +static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req) +{ + unsigned int transaction_len; + + transaction_len = req->req.length - req->req.actual; + req->last_transaction = 1; + if (transaction_len > ep->ep.maxpacket) { + transaction_len = ep->ep.maxpacket; + req->last_transaction = 0; + } else if (transaction_len == ep->ep.maxpacket && req->req.zero) { + req->last_transaction = 0; + } + + DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n", + ep->ep.name, req, transaction_len, + req->last_transaction ? ", done" : ""); + + memcpy(ep->fifo, req->req.buf + req->req.actual, transaction_len); + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + req->req.actual += transaction_len; +} + +static void submit_request(struct usba_ep *ep, struct usba_request *req) +{ + DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d), dma: %d\n", + ep->ep.name, req, req->req.length, req->using_dma); + + req->req.actual = 0; + req->submitted = 1; + + next_fifo_transaction(ep, req); + if (req->last_transaction) { + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); + usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); + } else { + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); + } +} + +static void submit_next_request(struct usba_ep *ep) +{ + struct usba_request *req; + + if (list_empty(&ep->queue)) { + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY); + return; + } + + req = list_entry(ep->queue.next, struct usba_request, queue); + if (!req->submitted) + submit_request(ep, req); +} + +static void send_status(struct usba_udc *udc, struct usba_ep *ep) +{ + ep->state = STATUS_STAGE_IN; + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); +} + +static void receive_data(struct usba_ep *ep) +{ + struct usba_udc *udc = ep->udc; + struct usba_request *req; + unsigned long status; + unsigned int bytecount, nr_busy; + int is_complete = 0; + + status = usba_ep_readl(ep, STA); + nr_busy = USBA_BFEXT(BUSY_BANKS, status); + + DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy); + + while (nr_busy > 0) { + if (list_empty(&ep->queue)) { + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + break; + } + req = list_entry(ep->queue.next, + struct usba_request, queue); + + bytecount = USBA_BFEXT(BYTE_COUNT, status); + + if (status & USBA_SHORT_PACKET) + is_complete = 1; + if (req->req.actual + bytecount >= req->req.length) { + is_complete = 1; + bytecount = req->req.length - req->req.actual; + } + + memcpy(req->req.buf + req->req.actual, ep->fifo, bytecount); + req->req.actual += bytecount; + + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + + if (is_complete) { + DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name); + req->req.status = 0; + list_del_init(&req->queue); + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + spin_lock(&udc->lock); + req->req.complete(&ep->ep, &req->req); + spin_unlock(&udc->lock); + } + + status = usba_ep_readl(ep, STA); + nr_busy = USBA_BFEXT(BUSY_BANKS, status); + + if (is_complete && ep_is_control(ep)) { + send_status(udc, ep); + break; + } + } +} + +static void +request_complete(struct usba_ep *ep, struct usba_request *req, int status) +{ + if (req->req.status == -EINPROGRESS) + req->req.status = status; + + DBG(DBG_GADGET | DBG_REQ, "%s: req %p complete: status %d, actual %u\n", + ep->ep.name, req, req->req.status, req->req.actual); + + req->req.complete(&ep->ep, &req->req); +} + +static void +request_complete_list(struct usba_ep *ep, struct list_head *list, int status) +{ + struct usba_request *req, *tmp_req; + + list_for_each_entry_safe(req, tmp_req, list, queue) { + list_del_init(&req->queue); + request_complete(ep, req, status); + } +} + +static int +usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + unsigned long flags, ept_cfg, maxpacket; + unsigned int nr_trans; + + DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc); + + maxpacket = usb_endpoint_maxp(desc) & 0x7ff; + + if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) + != ep->index) || + ep->index == 0 || + desc->bDescriptorType != USB_DT_ENDPOINT || + maxpacket == 0 || + maxpacket > ep->fifo_size) { + DBG(DBG_ERR, "ep_enable: Invalid argument"); + return -EINVAL; + } + + ep->is_isoc = 0; + ep->is_in = 0; + + if (maxpacket <= 8) + ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8); + else + /* LSB is bit 1, not 0 */ + ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3); + + DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n", + ep->ep.name, ept_cfg, maxpacket); + + if (usb_endpoint_dir_in(desc)) { + ep->is_in = 1; + ept_cfg |= USBA_EPT_DIR_IN; + } + + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL); + ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE); + break; + case USB_ENDPOINT_XFER_ISOC: + if (!ep->can_isoc) { + DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n", + ep->ep.name); + return -EINVAL; + } + + /* + * Bits 11:12 specify number of _additional_ + * transactions per microframe. + */ + nr_trans = ((usb_endpoint_maxp(desc) >> 11) & 3) + 1; + if (nr_trans > 3) + return -EINVAL; + + ep->is_isoc = 1; + ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO); + + /* + * Do triple-buffering on high-bandwidth iso endpoints. + */ + if (nr_trans > 1 && ep->nr_banks == 3) + ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_TRIPLE); + else + ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE); + ept_cfg |= USBA_BF(NB_TRANS, nr_trans); + break; + case USB_ENDPOINT_XFER_BULK: + ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK); + ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE); + break; + case USB_ENDPOINT_XFER_INT: + ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT); + ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE); + break; + } + + spin_lock_irqsave(&ep->udc->lock, flags); + + ep->desc = desc; + ep->ep.maxpacket = maxpacket; + + usba_ep_writel(ep, CFG, ept_cfg); + usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); + + usba_writel(udc, INT_ENB, + (usba_readl(udc, INT_ENB) + | USBA_BF(EPT_INT, 1 << ep->index))); + + spin_unlock_irqrestore(&udc->lock, flags); + + DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index, + (unsigned long)usba_ep_readl(ep, CFG)); + DBG(DBG_HW, "INT_ENB after init: %#08lx\n", + (unsigned long)usba_readl(udc, INT_ENB)); + + return 0; +} + +static int usba_ep_disable(struct usb_ep *_ep) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + LIST_HEAD(req_list); + unsigned long flags; + + DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name); + + spin_lock_irqsave(&udc->lock, flags); + + if (!ep->desc) { + spin_unlock_irqrestore(&udc->lock, flags); + /* REVISIT because this driver disables endpoints in + * reset_all_endpoints() before calling disconnect(), + * most gadget drivers would trigger this non-error ... + */ + if (udc->gadget.speed != USB_SPEED_UNKNOWN) + DBG(DBG_ERR, "ep_disable: %s not enabled\n", + ep->ep.name); + return -EINVAL; + } + ep->desc = NULL; + + list_splice_init(&ep->queue, &req_list); + usba_ep_writel(ep, CFG, 0); + usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE); + usba_writel(udc, INT_ENB, + usba_readl(udc, INT_ENB) & + ~USBA_BF(EPT_INT, 1 << ep->index)); + + request_complete_list(ep, &req_list, -ESHUTDOWN); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static struct usb_request * +usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct usba_request *req; + + DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags); + + req = malloc(sizeof(struct usba_request)); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void +usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct usba_request *req = to_usba_req(_req); + + DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req); + + free(req); +} + +static int +usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct usba_request *req = to_usba_req(_req); + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + unsigned long flags; + int ret; + + DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n", + ep->ep.name, req, _req->length); + + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || + !ep->desc) + return -ESHUTDOWN; + + req->submitted = 0; + req->using_dma = 0; + req->last_transaction = 0; + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* May have received a reset since last time we checked */ + ret = -ESHUTDOWN; + spin_lock_irqsave(&udc->lock, flags); + if (ep->desc) { + list_add_tail(&req->queue, &ep->queue); + + if ((!ep_is_control(ep) && ep->is_in) || + (ep_is_control(ep) && (ep->state == DATA_STAGE_IN || + ep->state == STATUS_STAGE_IN))) + usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); + else + usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY); + + ret = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_request *req = to_usba_req(_req); + + DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n", + ep->ep.name, req); + + /* + * Errors should stop the queue from advancing until the + * completion function returns. + */ + list_del_init(&req->queue); + + request_complete(ep, req, -ECONNRESET); + + /* Process the next request if any */ + submit_next_request(ep); + + return 0; +} + +static int usba_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct usba_ep *ep = to_usba_ep(_ep); + unsigned long flags; + int ret = 0; + + DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name, + value ? "set" : "clear"); + + if (!ep->desc) { + DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n", + ep->ep.name); + return -ENODEV; + } + + if (ep->is_isoc) { + DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n", + ep->ep.name); + return -ENOTTY; + } + + spin_lock_irqsave(&udc->lock, flags); + + /* + * We can't halt IN endpoints while there are still data to be + * transferred + */ + if (!list_empty(&ep->queue) || + ((value && ep->is_in && (usba_ep_readl(ep, STA) & + USBA_BF(BUSY_BANKS, -1L))))) { + ret = -EAGAIN; + } else { + if (value) + usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL); + else + usba_ep_writel(ep, CLR_STA, + USBA_FORCE_STALL | USBA_TOGGLE_CLR); + usba_ep_readl(ep, STA); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static int usba_ep_fifo_status(struct usb_ep *_ep) +{ + struct usba_ep *ep = to_usba_ep(_ep); + + return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA)); +} + +static void usba_ep_fifo_flush(struct usb_ep *_ep) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + + usba_writel(udc, EPT_RST, 1 << ep->index); +} + +static const struct usb_ep_ops usba_ep_ops = { + .enable = usba_ep_enable, + .disable = usba_ep_disable, + .alloc_request = usba_ep_alloc_request, + .free_request = usba_ep_free_request, + .queue = usba_ep_queue, + .dequeue = usba_ep_dequeue, + .set_halt = usba_ep_set_halt, + .fifo_status = usba_ep_fifo_status, + .fifo_flush = usba_ep_fifo_flush, +}; + +static int usba_udc_get_frame(struct usb_gadget *gadget) +{ + struct usba_udc *udc = to_usba_udc(gadget); + + return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM)); +} + +static int usba_udc_wakeup(struct usb_gadget *gadget) +{ + struct usba_udc *udc = to_usba_udc(gadget); + unsigned long flags; + u32 ctrl; + int ret = -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + if (udc->devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { + ctrl = usba_readl(udc, CTRL); + usba_writel(udc, CTRL, ctrl | USBA_REMOTE_WAKE_UP); + ret = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static int +usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered) +{ + struct usba_udc *udc = to_usba_udc(gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + if (is_selfpowered) + udc->devstatus |= 1 << USB_DEVICE_SELF_POWERED; + else + udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops usba_udc_ops = { + .get_frame = usba_udc_get_frame, + .wakeup = usba_udc_wakeup, + .set_selfpowered = usba_udc_set_selfpowered, +}; + +static struct usb_endpoint_descriptor usba_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = cpu_to_le16(64), + /* FIXME: I have no idea what to put here */ + .bInterval = 1, +}; + +/* + * Called with interrupts disabled and udc->lock held. + */ +static void reset_all_endpoints(struct usba_udc *udc) +{ + struct usba_ep *ep; + struct usba_request *req, *tmp_req; + + usba_writel(udc, EPT_RST, ~0UL); + + ep = to_usba_ep(udc->gadget.ep0); + list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) { + list_del_init(&req->queue); + request_complete(ep, req, -ECONNRESET); + } + + /* NOTE: normally, the next call to the gadget driver is in + * charge of disabling endpoints... usually disconnect(). + * The exception would be entering a high speed test mode. + * + * FIXME remove this code ... and retest thoroughly. + */ + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { + if (ep->desc) { + spin_unlock(&udc->lock); + usba_ep_disable(&ep->ep); + spin_lock(&udc->lock); + } + } +} + +static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex) +{ + struct usba_ep *ep; + + if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) + return to_usba_ep(udc->gadget.ep0); + + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { + u8 bEndpointAddress; + + if (!ep->desc) + continue; + bEndpointAddress = ep->desc->bEndpointAddress; + if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) + continue; + if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) + == (wIndex & USB_ENDPOINT_NUMBER_MASK)) + return ep; + } + + return NULL; +} + +/* Called with interrupts disabled and udc->lock held */ +static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep) +{ + usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL); + ep->state = WAIT_FOR_SETUP; +} + +static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep) +{ + if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL) + return 1; + return 0; +} + +static inline void set_address(struct usba_udc *udc, unsigned int addr) +{ + u32 regval; + + DBG(DBG_BUS, "setting address %u...\n", addr); + regval = usba_readl(udc, CTRL); + regval = USBA_BFINS(DEV_ADDR, addr, regval); + usba_writel(udc, CTRL, regval); +} + +static int do_test_mode(struct usba_udc *udc) +{ + static const char test_packet_buffer[] = { + /* JKJKJKJK * 9 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* JJKKJJKK * 8 */ + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, + /* JJKKJJKK * 8 */ + 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, + /* JJJJJJJKKKKKKK * 8 */ + 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + /* JJJJJJJK * 8 */ + 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, + /* {JKKKKKKK * 10}, JK */ + 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E + }; + struct usba_ep *ep; + int test_mode; + + test_mode = udc->test_mode; + + /* Start from a clean slate */ + reset_all_endpoints(udc); + + switch (test_mode) { + case 0x0100: + /* Test_J */ + usba_writel(udc, TST, USBA_TST_J_MODE); + DBG(DBG_ALL, "Entering Test_J mode...\n"); + break; + case 0x0200: + /* Test_K */ + usba_writel(udc, TST, USBA_TST_K_MODE); + DBG(DBG_ALL, "Entering Test_K mode...\n"); + break; + case 0x0300: + /* + * Test_SE0_NAK: Force high-speed mode and set up ep0 + * for Bulk IN transfers + */ + ep = &udc->usba_ep[0]; + usba_writel(udc, TST, + USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH)); + usba_ep_writel(ep, CFG, + USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64) + | USBA_EPT_DIR_IN + | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK) + | USBA_BF(BK_NUMBER, 1)); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) { + set_protocol_stall(udc, ep); + DBG(DBG_ALL, "Test_SE0_NAK: ep0 not mapped\n"); + } else { + usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); + DBG(DBG_ALL, "Entering Test_SE0_NAK mode...\n"); + } + break; + case 0x0400: + /* Test_Packet */ + ep = &udc->usba_ep[0]; + usba_ep_writel(ep, CFG, + USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64) + | USBA_EPT_DIR_IN + | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK) + | USBA_BF(BK_NUMBER, 1)); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) { + set_protocol_stall(udc, ep); + DBG(DBG_ALL, "Test_Packet: ep0 not mapped\n"); + } else { + usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); + usba_writel(udc, TST, USBA_TST_PKT_MODE); + memcpy(ep->fifo, test_packet_buffer, + sizeof(test_packet_buffer)); + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + DBG(DBG_ALL, "Entering Test_Packet mode...\n"); + } + break; + default: + DBG(DBG_ERR, "Invalid test mode: 0x%04x\n", test_mode); + return -EINVAL; + } + + return 0; +} + +/* Avoid overly long expressions */ +static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq) +{ + if (crq->wValue == cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP)) + return true; + return false; +} + +static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq) +{ + if (crq->wValue == cpu_to_le16(USB_DEVICE_TEST_MODE)) + return true; + return false; +} + +static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq) +{ + if (crq->wValue == cpu_to_le16(USB_ENDPOINT_HALT)) + return true; + return false; +} + +static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep, + struct usb_ctrlrequest *crq) +{ + int retval = 0; + + switch (crq->bRequest) { + case USB_REQ_GET_STATUS: { + u16 status; + + if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) { + status = cpu_to_le16(udc->devstatus); + } else if (crq->bRequestType + == (USB_DIR_IN | USB_RECIP_INTERFACE)) { + status = cpu_to_le16(0); + } else if (crq->bRequestType + == (USB_DIR_IN | USB_RECIP_ENDPOINT)) { + struct usba_ep *target; + + target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); + if (!target) + goto stall; + + status = 0; + if (is_stalled(udc, target)) + status |= cpu_to_le16(1); + } else { + goto delegate; + } + + /* Write directly to the FIFO. No queueing is done. */ + if (crq->wLength != cpu_to_le16(sizeof(status))) + goto stall; + ep->state = DATA_STAGE_IN; + __raw_writew(status, ep->fifo); + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + break; + } + + case USB_REQ_CLEAR_FEATURE: { + if (crq->bRequestType == USB_RECIP_DEVICE) { + if (feature_is_dev_remote_wakeup(crq)) + udc->devstatus + &= ~(1 << USB_DEVICE_REMOTE_WAKEUP); + else + /* Can't CLEAR_FEATURE TEST_MODE */ + goto stall; + } else if (crq->bRequestType == USB_RECIP_ENDPOINT) { + struct usba_ep *target; + + if (crq->wLength != cpu_to_le16(0) || + !feature_is_ep_halt(crq)) + goto stall; + target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); + if (!target) + goto stall; + + usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL); + if (target->index != 0) + usba_ep_writel(target, CLR_STA, + USBA_TOGGLE_CLR); + } else { + goto delegate; + } + + send_status(udc, ep); + break; + } + + case USB_REQ_SET_FEATURE: { + if (crq->bRequestType == USB_RECIP_DEVICE) { + if (feature_is_dev_test_mode(crq)) { + send_status(udc, ep); + ep->state = STATUS_STAGE_TEST; + udc->test_mode = le16_to_cpu(crq->wIndex); + return 0; + } else if (feature_is_dev_remote_wakeup(crq)) { + udc->devstatus |= 1 << USB_DEVICE_REMOTE_WAKEUP; + } else { + goto stall; + } + } else if (crq->bRequestType == USB_RECIP_ENDPOINT) { + struct usba_ep *target; + + if (crq->wLength != cpu_to_le16(0) || + !feature_is_ep_halt(crq)) + goto stall; + + target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); + if (!target) + goto stall; + + usba_ep_writel(target, SET_STA, USBA_FORCE_STALL); + } else { + goto delegate; + } + + send_status(udc, ep); + break; + } + + case USB_REQ_SET_ADDRESS: + if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE)) + goto delegate; + + set_address(udc, le16_to_cpu(crq->wValue)); + send_status(udc, ep); + ep->state = STATUS_STAGE_ADDR; + break; + + default: +delegate: + spin_unlock(&udc->lock); + retval = udc->driver->setup(&udc->gadget, crq); + spin_lock(&udc->lock); + } + + return retval; + +stall: + DBG(DBG_ALL, "%s: Invalid setup request: %02x.%02x v%04x i%04x l%d\n", + ep->ep.name, crq->bRequestType, crq->bRequest, + le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex), + le16_to_cpu(crq->wLength)); + set_protocol_stall(udc, ep); + + return -1; +} + +static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep) +{ + struct usba_request *req; + u32 epstatus; + u32 epctrl; + +restart: + epstatus = usba_ep_readl(ep, STA); + epctrl = usba_ep_readl(ep, CTL); + + DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n", + ep->ep.name, ep->state, epstatus, epctrl); + + req = NULL; + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, + struct usba_request, queue); + + if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) { + if (req->submitted) + next_fifo_transaction(ep, req); + else + submit_request(ep, req); + + if (req->last_transaction) { + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); + usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); + } + goto restart; + } + if ((epstatus & epctrl) & USBA_TX_COMPLETE) { + usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE); + + switch (ep->state) { + case DATA_STAGE_IN: + usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY); + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = STATUS_STAGE_OUT; + break; + case STATUS_STAGE_ADDR: + /* Activate our new address */ + usba_writel(udc, CTRL, (usba_readl(udc, CTRL) + | USBA_FADDR_EN)); + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = WAIT_FOR_SETUP; + break; + case STATUS_STAGE_IN: + if (req) { + list_del_init(&req->queue); + request_complete(ep, req, 0); + submit_next_request(ep); + } + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = WAIT_FOR_SETUP; + break; + case STATUS_STAGE_TEST: + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = WAIT_FOR_SETUP; + if (do_test_mode(udc)) + set_protocol_stall(udc, ep); + break; + default: + DBG(DBG_ALL, "%s: TXCOMP: Invalid endpoint state %d\n", + ep->ep.name, ep->state); + set_protocol_stall(udc, ep); + break; + } + + goto restart; + } + if ((epstatus & epctrl) & USBA_RX_BK_RDY) { + switch (ep->state) { + case STATUS_STAGE_OUT: + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + + if (req) { + list_del_init(&req->queue); + request_complete(ep, req, 0); + } + ep->state = WAIT_FOR_SETUP; + break; + + case DATA_STAGE_OUT: + receive_data(ep); + break; + + default: + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + DBG(DBG_ALL, "%s: RXRDY: Invalid endpoint state %d\n", + ep->ep.name, ep->state); + set_protocol_stall(udc, ep); + break; + } + + goto restart; + } + if (epstatus & USBA_RX_SETUP) { + union { + struct usb_ctrlrequest crq; + unsigned long data[2]; + } crq; + unsigned int pkt_len; + int ret; + + if (ep->state != WAIT_FOR_SETUP) { + /* + * Didn't expect a SETUP packet at this + * point. Clean up any pending requests (which + * may be successful). + */ + int status = -EPROTO; + + /* + * RXRDY and TXCOMP are dropped when SETUP + * packets arrive. Just pretend we received + * the status packet. + */ + if (ep->state == STATUS_STAGE_OUT || + ep->state == STATUS_STAGE_IN) { + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + status = 0; + } + + if (req) { + list_del_init(&req->queue); + request_complete(ep, req, status); + } + } + + pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA)); + DBG(DBG_HW, "Packet length: %u\n", pkt_len); + if (pkt_len != sizeof(crq)) { + DBG(DBG_ALL, "udc: Invalid length %u (expected %zu)\n", + pkt_len, sizeof(crq)); + set_protocol_stall(udc, ep); + return; + } + + DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo); + memcpy(crq.data, ep->fifo, sizeof(crq)); + + /* Free up one bank in the FIFO so that we can + * generate or receive a reply right away. */ + usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP); + + if (crq.crq.bRequestType & USB_DIR_IN) { + /* + * The USB 2.0 spec states that "if wLength is + * zero, there is no data transfer phase." + * However, testusb #14 seems to actually + * expect a data phase even if wLength = 0... + */ + ep->state = DATA_STAGE_IN; + } else { + if (crq.crq.wLength != cpu_to_le16(0)) + ep->state = DATA_STAGE_OUT; + else + ep->state = STATUS_STAGE_IN; + } + + ret = -1; + if (ep->index == 0) { + ret = handle_ep0_setup(udc, ep, &crq.crq); + } else { + spin_unlock(&udc->lock); + ret = udc->driver->setup(&udc->gadget, &crq.crq); + spin_lock(&udc->lock); + } + + DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n", + crq.crq.bRequestType, crq.crq.bRequest, + le16_to_cpu(crq.crq.wLength), ep->state, ret); + + if (ret < 0) { + /* Let the host know that we failed */ + set_protocol_stall(udc, ep); + } + } +} + +static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep) +{ + struct usba_request *req; + u32 epstatus; + u32 epctrl; + + epstatus = usba_ep_readl(ep, STA); + epctrl = usba_ep_readl(ep, CTL); + + DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus); + + while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) { + DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name); + + if (list_empty(&ep->queue)) { + DBG(DBG_INT, "ep_irq: queue empty\n"); + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); + return; + } + + req = list_entry(ep->queue.next, struct usba_request, queue); + + if (req->submitted) + next_fifo_transaction(ep, req); + else + submit_request(ep, req); + + if (req->last_transaction) { + list_del_init(&req->queue); + submit_next_request(ep); + request_complete(ep, req, 0); + } + + epstatus = usba_ep_readl(ep, STA); + epctrl = usba_ep_readl(ep, CTL); + } + + if ((epstatus & epctrl) & USBA_RX_BK_RDY) { + DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name); + receive_data(ep); + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + } +} + +static int usba_udc_irq(struct usba_udc *udc) +{ + u32 status, ep_status; + + spin_lock(&udc->lock); + + status = usba_readl(udc, INT_STA); + DBG(DBG_INT, "irq, status=%#08x\n", status); + + if (status & USBA_DET_SUSPEND) { + usba_writel(udc, INT_CLR, USBA_DET_SUSPEND); + DBG(DBG_BUS, "Suspend detected\n"); + if (udc->gadget.speed != USB_SPEED_UNKNOWN && + udc->driver && udc->driver->suspend) { + spin_unlock(&udc->lock); + udc->driver->suspend(&udc->gadget); + spin_lock(&udc->lock); + } + } + + if (status & USBA_WAKE_UP) { + usba_writel(udc, INT_CLR, USBA_WAKE_UP); + DBG(DBG_BUS, "Wake Up CPU detected\n"); + } + + if (status & USBA_END_OF_RESUME) { + usba_writel(udc, INT_CLR, USBA_END_OF_RESUME); + DBG(DBG_BUS, "Resume detected\n"); + if (udc->gadget.speed != USB_SPEED_UNKNOWN && + udc->driver && udc->driver->resume) { + spin_unlock(&udc->lock); + udc->driver->resume(&udc->gadget); + spin_lock(&udc->lock); + } + } + + ep_status = USBA_BFEXT(EPT_INT, status); + if (ep_status) { + int i; + + for (i = 0; i < USBA_NR_ENDPOINTS; i++) + if (ep_status & (1 << i)) { + if (ep_is_control(&udc->usba_ep[i])) + usba_control_irq(udc, &udc->usba_ep[i]); + else + usba_ep_irq(udc, &udc->usba_ep[i]); + } + } + + if (status & USBA_END_OF_RESET) { + struct usba_ep *ep0; + + usba_writel(udc, INT_CLR, USBA_END_OF_RESET); + reset_all_endpoints(udc); + + if (udc->gadget.speed != USB_SPEED_UNKNOWN && + udc->driver->disconnect) { + udc->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock(&udc->lock); + udc->driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); + } + + if (status & USBA_HIGH_SPEED) + udc->gadget.speed = USB_SPEED_HIGH; + else + udc->gadget.speed = USB_SPEED_FULL; + + ep0 = &udc->usba_ep[0]; + ep0->desc = &usba_ep0_desc; + ep0->state = WAIT_FOR_SETUP; + usba_ep_writel(ep0, CFG, + (USBA_BF(EPT_SIZE, EP0_EPT_SIZE) + | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL) + | USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE))); + usba_ep_writel(ep0, CTL_ENB, + USBA_EPT_ENABLE | USBA_RX_SETUP); + usba_writel(udc, INT_ENB, + (usba_readl(udc, INT_ENB) + | USBA_BF(EPT_INT, 1) + | USBA_DET_SUSPEND + | USBA_END_OF_RESUME)); + + /* + * Unclear why we hit this irregularly, e.g. in usbtest, + * but it's clearly harmless... + */ + if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED)) + DBG(DBG_ALL, "ODD: EP0 configuration is invalid!\n"); + } + + spin_unlock(&udc->lock); + + return 0; +} + +static int atmel_usba_start(struct usba_udc *udc) +{ + udc->devstatus = 1 << USB_DEVICE_SELF_POWERED; + + udc->vbus_prev = 0; + + /* If Vbus is present, enable the controller and wait for reset */ + if (vbus_is_present(udc) && udc->vbus_prev == 0) { + usba_writel(udc, CTRL, USBA_ENABLE_MASK); + usba_writel(udc, INT_ENB, USBA_END_OF_RESET); + } + + return 0; +} + +static int atmel_usba_stop(struct usba_udc *udc) +{ + udc->gadget.speed = USB_SPEED_UNKNOWN; + reset_all_endpoints(udc); + + /* This will also disable the DP pullup */ + usba_writel(udc, CTRL, USBA_DISABLE_MASK); + + return 0; +} + +static struct usba_udc controller = { + .regs = (unsigned *)ATMEL_BASE_UDPHS, + .fifo = (unsigned *)ATMEL_BASE_UDPHS_FIFO, + .gadget = { + .ops = &usba_udc_ops, + .ep_list = LIST_HEAD_INIT(controller.gadget.ep_list), + .speed = USB_SPEED_HIGH, + .is_dualspeed = 1, + .name = "atmel_usba_udc", + }, +}; + +int usb_gadget_handle_interrupts(void) +{ + struct usba_udc *udc = &controller; + + return usba_udc_irq(udc); +} + + +int usb_gadget_register_driver(struct usb_gadget_driver *driver) +{ + struct usba_udc *udc = &controller; + int ret; + + if (!driver || !driver->bind || !driver->setup) { + printf("bad paramter\n"); + return -EINVAL; + } + + if (udc->driver) { + printf("UDC already has a gadget driver\n"); + return -EBUSY; + } + + atmel_usba_start(udc); + + udc->driver = driver; + + ret = driver->bind(&udc->gadget); + if (ret) { + error("driver->bind() returned %d\n", ret); + udc->driver = NULL; + } + + return ret; +} + +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + struct usba_udc *udc = &controller; + + if (!driver || !driver->unbind || !driver->disconnect) { + error("bad paramter\n"); + return -EINVAL; + } + + driver->disconnect(&udc->gadget); + driver->unbind(&udc->gadget); + udc->driver = NULL; + + atmel_usba_stop(udc); + + return 0; +} + +static struct usba_ep *usba_udc_pdata(struct usba_platform_data *pdata, + struct usba_udc *udc) +{ + struct usba_ep *eps; + int i; + + eps = malloc(sizeof(struct usba_ep) * pdata->num_ep); + if (!eps) { + error("failed to alloc eps\n"); + return NULL; + } + + udc->gadget.ep0 = &eps[0].ep; + + INIT_LIST_HEAD(&udc->gadget.ep_list); + INIT_LIST_HEAD(&eps[0].ep.ep_list); + + for (i = 0; i < pdata->num_ep; i++) { + struct usba_ep *ep = &eps[i]; + + ep->ep_regs = udc->regs + USBA_EPT_BASE(i); + ep->dma_regs = udc->regs + USBA_DMA_BASE(i); + ep->fifo = udc->fifo + USBA_FIFO_BASE(i); + ep->ep.ops = &usba_ep_ops; + ep->ep.name = pdata->ep[i].name; + ep->ep.maxpacket = pdata->ep[i].fifo_size; + ep->fifo_size = ep->ep.maxpacket; + ep->udc = udc; + INIT_LIST_HEAD(&ep->queue); + ep->nr_banks = pdata->ep[i].nr_banks; + ep->index = pdata->ep[i].index; + ep->can_dma = pdata->ep[i].can_dma; + ep->can_isoc = pdata->ep[i].can_isoc; + if (i) + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + }; + + return eps; +} + +int usba_udc_probe(struct usba_platform_data *pdata) +{ + struct usba_udc *udc; + + udc = &controller; + + udc->usba_ep = usba_udc_pdata(pdata, udc); + + return 0; +} diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h new file mode 100644 index 0000000000..92e462db60 --- /dev/null +++ b/drivers/usb/gadget/atmel_usba_udc.h @@ -0,0 +1,326 @@ +/* + * Register definition for Atmel USBA high speed USB device controller + * [Original from Linux kernel: drivers/usb/gadget/atmel_usba_udc.h] + * + * Copyright (C) 2005-2013 Atmel Corporation + * Bo Shen <voice.shen@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LINUX_USB_GADGET_USBA_UDC_H__ +#define __LINUX_USB_GADGET_USBA_UDC_H__ + +/* USB register offsets */ +#define USBA_CTRL 0x0000 +#define USBA_FNUM 0x0004 +#define USBA_INT_ENB 0x0010 +#define USBA_INT_STA 0x0014 +#define USBA_INT_CLR 0x0018 +#define USBA_EPT_RST 0x001c +#define USBA_TST 0x00e0 + +/* USB endpoint register offsets */ +#define USBA_EPT_CFG 0x0000 +#define USBA_EPT_CTL_ENB 0x0004 +#define USBA_EPT_CTL_DIS 0x0008 +#define USBA_EPT_CTL 0x000c +#define USBA_EPT_SET_STA 0x0014 +#define USBA_EPT_CLR_STA 0x0018 +#define USBA_EPT_STA 0x001c + +/* USB DMA register offsets */ +#define USBA_DMA_NXT_DSC 0x0000 +#define USBA_DMA_ADDRESS 0x0004 +#define USBA_DMA_CONTROL 0x0008 +#define USBA_DMA_STATUS 0x000c + +/* Bitfields in CTRL */ +#define USBA_DEV_ADDR_OFFSET 0 +#define USBA_DEV_ADDR_SIZE 7 +#define USBA_FADDR_EN (1 << 7) +#define USBA_EN_USBA (1 << 8) +#define USBA_DETACH (1 << 9) +#define USBA_REMOTE_WAKE_UP (1 << 10) +#define USBA_PULLD_DIS (1 << 11) + +#if defined(CONFIG_AVR32) +#define USBA_ENABLE_MASK USBA_EN_USBA +#define USBA_DISABLE_MASK 0 +#elif defined(CONFIG_AT91FAMILY) +#define USBA_ENABLE_MASK (USBA_EN_USBA | USBA_PULLD_DIS) +#define USBA_DISABLE_MASK USBA_DETACH +#endif /* CONFIG_ARCH_AT91 */ + +/* Bitfields in FNUM */ +#define USBA_MICRO_FRAME_NUM_OFFSET 0 +#define USBA_MICRO_FRAME_NUM_SIZE 3 +#define USBA_FRAME_NUMBER_OFFSET 3 +#define USBA_FRAME_NUMBER_SIZE 11 +#define USBA_FRAME_NUM_ERROR (1 << 31) + +/* Bitfields in INT_ENB/INT_STA/INT_CLR */ +#define USBA_HIGH_SPEED (1 << 0) +#define USBA_DET_SUSPEND (1 << 1) +#define USBA_MICRO_SOF (1 << 2) +#define USBA_SOF (1 << 3) +#define USBA_END_OF_RESET (1 << 4) +#define USBA_WAKE_UP (1 << 5) +#define USBA_END_OF_RESUME (1 << 6) +#define USBA_UPSTREAM_RESUME (1 << 7) +#define USBA_EPT_INT_OFFSET 8 +#define USBA_EPT_INT_SIZE 16 +#define USBA_DMA_INT_OFFSET 24 +#define USBA_DMA_INT_SIZE 8 + +/* Bitfields in EPT_RST */ +#define USBA_RST_OFFSET 0 +#define USBA_RST_SIZE 16 + +/* Bitfields in USBA_TST */ +#define USBA_SPEED_CFG_OFFSET 0 +#define USBA_SPEED_CFG_SIZE 2 +#define USBA_TST_J_MODE (1 << 2) +#define USBA_TST_K_MODE (1 << 3) +#define USBA_TST_PKT_MODE (1 << 4) +#define USBA_OPMODE2 (1 << 5) + +/* Bitfields in EPT_CFG */ +#define USBA_EPT_SIZE_OFFSET 0 +#define USBA_EPT_SIZE_SIZE 3 +#define USBA_EPT_DIR_IN (1 << 3) +#define USBA_EPT_TYPE_OFFSET 4 +#define USBA_EPT_TYPE_SIZE 2 +#define USBA_BK_NUMBER_OFFSET 6 +#define USBA_BK_NUMBER_SIZE 2 +#define USBA_NB_TRANS_OFFSET 8 +#define USBA_NB_TRANS_SIZE 2 +#define USBA_EPT_MAPPED (1 << 31) + +/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */ +#define USBA_EPT_ENABLE (1 << 0) +#define USBA_AUTO_VALID (1 << 1) +#define USBA_INTDIS_DMA (1 << 3) +#define USBA_NYET_DIS (1 << 4) +#define USBA_DATAX_RX (1 << 6) +#define USBA_MDATA_RX (1 << 7) +/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */ +#define USBA_BUSY_BANK_IE (1 << 18) + +/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */ +#define USBA_FORCE_STALL (1 << 5) +#define USBA_TOGGLE_CLR (1 << 6) +#define USBA_TOGGLE_SEQ_OFFSET 6 +#define USBA_TOGGLE_SEQ_SIZE 2 +#define USBA_ERR_OVFLW (1 << 8) +#define USBA_RX_BK_RDY (1 << 9) +#define USBA_KILL_BANK (1 << 9) +#define USBA_TX_COMPLETE (1 << 10) +#define USBA_TX_PK_RDY (1 << 11) +#define USBA_ISO_ERR_TRANS (1 << 11) +#define USBA_RX_SETUP (1 << 12) +#define USBA_ISO_ERR_FLOW (1 << 12) +#define USBA_STALL_SENT (1 << 13) +#define USBA_ISO_ERR_CRC (1 << 13) +#define USBA_ISO_ERR_NBTRANS (1 << 13) +#define USBA_NAK_IN (1 << 14) +#define USBA_ISO_ERR_FLUSH (1 << 14) +#define USBA_NAK_OUT (1 << 15) +#define USBA_CURRENT_BANK_OFFSET 16 +#define USBA_CURRENT_BANK_SIZE 2 +#define USBA_BUSY_BANKS_OFFSET 18 +#define USBA_BUSY_BANKS_SIZE 2 +#define USBA_BYTE_COUNT_OFFSET 20 +#define USBA_BYTE_COUNT_SIZE 11 +#define USBA_SHORT_PACKET (1 << 31) + +/* Bitfields in DMA_CONTROL */ +#define USBA_DMA_CH_EN (1 << 0) +#define USBA_DMA_LINK (1 << 1) +#define USBA_DMA_END_TR_EN (1 << 2) +#define USBA_DMA_END_BUF_EN (1 << 3) +#define USBA_DMA_END_TR_IE (1 << 4) +#define USBA_DMA_END_BUF_IE (1 << 5) +#define USBA_DMA_DESC_LOAD_IE (1 << 6) +#define USBA_DMA_BURST_LOCK (1 << 7) +#define USBA_DMA_BUF_LEN_OFFSET 16 +#define USBA_DMA_BUF_LEN_SIZE 16 + +/* Bitfields in DMA_STATUS */ +#define USBA_DMA_CH_ACTIVE (1 << 1) +#define USBA_DMA_END_TR_ST (1 << 4) +#define USBA_DMA_END_BUF_ST (1 << 5) +#define USBA_DMA_DESC_LOAD_ST (1 << 6) + +/* Constants for SPEED_CFG */ +#define USBA_SPEED_CFG_NORMAL 0 +#define USBA_SPEED_CFG_FORCE_HIGH 2 +#define USBA_SPEED_CFG_FORCE_FULL 3 + +/* Constants for EPT_SIZE */ +#define USBA_EPT_SIZE_8 0 +#define USBA_EPT_SIZE_16 1 +#define USBA_EPT_SIZE_32 2 +#define USBA_EPT_SIZE_64 3 +#define USBA_EPT_SIZE_128 4 +#define USBA_EPT_SIZE_256 5 +#define USBA_EPT_SIZE_512 6 +#define USBA_EPT_SIZE_1024 7 + +/* Constants for EPT_TYPE */ +#define USBA_EPT_TYPE_CONTROL 0 +#define USBA_EPT_TYPE_ISO 1 +#define USBA_EPT_TYPE_BULK 2 +#define USBA_EPT_TYPE_INT 3 + +/* Constants for BK_NUMBER */ +#define USBA_BK_NUMBER_ZERO 0 +#define USBA_BK_NUMBER_ONE 1 +#define USBA_BK_NUMBER_DOUBLE 2 +#define USBA_BK_NUMBER_TRIPLE 3 + +/* Bit manipulation macros */ +#define USBA_BF(name, value) \ + (((value) & ((1 << USBA_##name##_SIZE) - 1)) \ + << USBA_##name##_OFFSET) +#define USBA_BFEXT(name, value) \ + (((value) >> USBA_##name##_OFFSET) \ + & ((1 << USBA_##name##_SIZE) - 1)) +#define USBA_BFINS(name, value, old) \ + (((old) & ~(((1 << USBA_##name##_SIZE) - 1) \ + << USBA_##name##_OFFSET)) \ + | USBA_BF(name, value)) + +/* Register access macros */ +#define usba_readl(udc, reg) \ + __raw_readl((udc)->regs + USBA_##reg) +#define usba_writel(udc, reg, value) \ + __raw_writel((value), (udc)->regs + USBA_##reg) +#define usba_ep_readl(ep, reg) \ + __raw_readl((ep)->ep_regs + USBA_EPT_##reg) +#define usba_ep_writel(ep, reg, value) \ + __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg) +#define usba_dma_readl(ep, reg) \ + __raw_readl((ep)->dma_regs + USBA_DMA_##reg) +#define usba_dma_writel(ep, reg, value) \ + __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg) + +/* Calculate base address for a given endpoint or DMA controller */ +#define USBA_EPT_BASE(x) (0x100 + (x) * 0x20) +#define USBA_DMA_BASE(x) (0x300 + (x) * 0x10) +#define USBA_FIFO_BASE(x) ((x) << 16) + +/* Synth parameters */ +#define USBA_NR_ENDPOINTS 7 + +#define EP0_FIFO_SIZE 64 +#define EP0_EPT_SIZE USBA_EPT_SIZE_64 +#define EP0_NR_BANKS 1 + +#define DBG_ERR 0x0001 /* report all error returns */ +#define DBG_HW 0x0002 /* debug hardware initialization */ +#define DBG_GADGET 0x0004 /* calls to/from gadget driver */ +#define DBG_INT 0x0008 /* interrupts */ +#define DBG_BUS 0x0010 /* report changes in bus state */ +#define DBG_QUEUE 0x0020 /* debug request queue processing */ +#define DBG_FIFO 0x0040 /* debug FIFO contents */ +#define DBG_DMA 0x0080 /* debug DMA handling */ +#define DBG_REQ 0x0100 /* print out queued request length */ +#define DBG_ALL 0xffff +#define DBG_NONE 0x0000 + +#define DEBUG_LEVEL (DBG_ERR) + +#define DBG(level, fmt, ...) \ + do { \ + if ((level) & DEBUG_LEVEL) \ + debug("udc: " fmt, ## __VA_ARGS__); \ + } while (0) + +enum usba_ctrl_state { + WAIT_FOR_SETUP, + DATA_STAGE_IN, + DATA_STAGE_OUT, + STATUS_STAGE_IN, + STATUS_STAGE_OUT, + STATUS_STAGE_ADDR, + STATUS_STAGE_TEST, +}; + +struct usba_dma_desc { + dma_addr_t next; + dma_addr_t addr; + u32 ctrl; +}; + +struct usba_ep { + int state; + void *ep_regs; + void *dma_regs; + void *fifo; + struct usb_ep ep; + struct usba_udc *udc; + + struct list_head queue; + + u16 fifo_size; + u8 nr_banks; + u8 index; + unsigned int can_dma:1; + unsigned int can_isoc:1; + unsigned int is_isoc:1; + unsigned int is_in:1; + + const struct usb_endpoint_descriptor *desc; +}; + +struct usba_request { + struct usb_request req; + struct list_head queue; + + u32 ctrl; + + unsigned int submitted:1; + unsigned int last_transaction:1; + unsigned int using_dma:1; + unsigned int mapped:1; +}; + +struct usba_udc { + void *regs; + void *fifo; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct platform_device *pdev; + int irq; + int vbus_pin; + int vbus_pin_inverted; + int num_ep; + struct usba_ep *usba_ep; + + u16 devstatus; + + u16 test_mode; + int vbus_prev; +}; + +static inline struct usba_ep *to_usba_ep(struct usb_ep *ep) +{ + return container_of(ep, struct usba_ep, ep); +} + +static inline struct usba_request *to_usba_req(struct usb_request *req) +{ + return container_of(req, struct usba_request, req); +} + +static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget) +{ + return container_of(gadget, struct usba_udc, gadget); +} + +#define ep_is_control(ep) ((ep)->index == 0) +#define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE) + +#endif /* __LINUX_USB_GADGET_USBA_UDC_H */ diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index f563afe787..014a6791c1 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -10,6 +10,7 @@ */ #include <common.h> +#include <asm/unaligned.h> #include <asm/errno.h> #include <linux/list.h> #include <linux/string.h> @@ -86,7 +87,8 @@ int usb_gadget_config_buf( /* config descriptor first */ if (length < USB_DT_CONFIG_SIZE || !desc) return -EINVAL; - *cp = *config; + /* config need not be aligned */ + memcpy(cp, config, sizeof(*cp)); /* then interface/endpoint/class/vendor/... */ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8 *)buf, @@ -100,7 +102,7 @@ int usb_gadget_config_buf( /* patch up the config descriptor */ cp->bLength = USB_DT_CONFIG_SIZE; cp->bDescriptorType = USB_DT_CONFIG; - cp->wTotalLength = cpu_to_le16(len); + put_unaligned_le16(len, &cp->wTotalLength); cp->bmAttributes |= USB_CONFIG_ATT_ONE; return len; } diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 579893cbff..700d5fbfb2 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -849,9 +849,10 @@ static struct usb_gadget_strings stringtab = { }; /*============================================================================*/ -static u8 control_req[USB_BUFSIZ]; +DEFINE_CACHE_ALIGN_BUFFER(u8, control_req, USB_BUFSIZ); + #if defined(CONFIG_USB_ETH_CDC) || defined(CONFIG_USB_ETH_RNDIS) -static u8 status_req[STATUS_BYTECOUNT] __attribute__ ((aligned(4))); +DEFINE_CACHE_ALIGN_BUFFER(u8, status_req, STATUS_BYTECOUNT); #endif diff --git a/drivers/usb/gadget/f_dfu.h b/drivers/usb/gadget/f_dfu.h index 34a4dde5aa..cc2c45567b 100644 --- a/drivers/usb/gadget/f_dfu.h +++ b/drivers/usb/gadget/f_dfu.h @@ -82,7 +82,4 @@ struct dfu_function_descriptor { __le16 wTransferSize; __le16 bcdDFUVersion; } __packed; - -/* configuration-specific linkup */ -int dfu_add(struct usb_configuration *c); #endif /* __F_DFU_H_ */ diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c index a3e05a872a..40868c034e 100644 --- a/drivers/usb/gadget/g_dnl.c +++ b/drivers/usb/gadget/g_dnl.c @@ -7,7 +7,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <errno.h> #include <common.h> #include <malloc.h> @@ -15,11 +14,11 @@ #include <part.h> #include <g_dnl.h> -#include "f_dfu.h" +#include <usb_mass_storage.h> +#include <dfu.h> #include "gadget_chips.h" #include "composite.c" -#include "f_mass_storage.c" /* * One needs to define the following: diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index fdad739724..3ae04c0253 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -36,6 +36,12 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #endif +/* + * EHCI spec page 20 says that the HC may take up to 16 uFrames (= 4ms) to halt. + * Let's time out after 8 to have a little safety margin on top of that. + */ +#define HCHALT_TIMEOUT (8 * 1000) + static struct ehci_ctrl ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT]; #define ALIGN_END_ADDR(type, ptr, size) \ @@ -190,6 +196,36 @@ out: return ret; } +static int ehci_shutdown(struct ehci_ctrl *ctrl) +{ + int i, ret = 0; + uint32_t cmd, reg; + + cmd = ehci_readl(&ctrl->hcor->or_usbcmd); + cmd &= ~(CMD_PSE | CMD_ASE); + ehci_writel(&ctrl->hcor->or_usbcmd, cmd); + ret = handshake(&ctrl->hcor->or_usbsts, STS_ASS | STS_PSS, 0, + 100 * 1000); + + if (!ret) { + for (i = 0; i < CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS; i++) { + reg = ehci_readl(&ctrl->hcor->or_portsc[i]); + reg |= EHCI_PS_SUSP; + ehci_writel(&ctrl->hcor->or_portsc[i], reg); + } + + cmd &= ~CMD_RUN; + ehci_writel(&ctrl->hcor->or_usbcmd, cmd); + ret = handshake(&ctrl->hcor->or_usbsts, STS_HALT, STS_HALT, + HCHALT_TIMEOUT); + } + + if (ret) + puts("EHCI failed to shut down host controller.\n"); + + return ret; +} + static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz) { uint32_t delta, next; @@ -808,6 +844,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, } break; case USB_PORT_FEAT_TEST: + ehci_shutdown(ctrl); reg &= ~(0xf << 16); reg |= ((le16_to_cpu(req->index) >> 8) & 0xf) << 16; ehci_writel(status_reg, reg); @@ -878,6 +915,7 @@ unknown: int usb_lowlevel_stop(int index) { + ehci_shutdown(&ehcic[index]); return ehci_hcd_stop(index); } diff --git a/examples/standalone/README.smc91111_eeprom b/examples/standalone/README.smc91111_eeprom index 28e7e69788..a2d52e7770 100644 --- a/examples/standalone/README.smc91111_eeprom +++ b/examples/standalone/README.smc91111_eeprom @@ -154,10 +154,10 @@ The MAC address can be stored in four locations: -Boot environmental variable in Flash <- can not change, without re-flashing U-boot. -U-Boot environental variable <- can not change, without +U-Boot environmental variable <- can not change, without resetting board/U-Boot -LAN91C111 Registers <- volitle -LAN91C111 EEPROM <- Non Volitle +LAN91C111 Registers <- volatile +LAN91C111 EEPROM <- Non-volatile If you have not activated the network, and do not have a hardcoded or pre-assigned MAC address in U-boot, the environmental variables diff --git a/include/common.h b/include/common.h index 8addf43343..0d40fab041 100644 --- a/include/common.h +++ b/include/common.h @@ -383,7 +383,7 @@ int setenv_hex(const char *varname, ulong value); /** * setenv_addr - Set an environment variable to an address in hex * - * @varname: Environmet variable to set + * @varname: Environment variable to set * @addr: Value to set it to * @return 0 if ok, 1 on error */ @@ -1015,10 +1015,10 @@ static inline phys_addr_t map_to_sysmem(void *ptr) * of a function scoped static buffer. It can not be used to create a cache * line aligned global buffer. */ -#define PAD_COUNT(s, pad) ((s - 1) / pad + 1) +#define PAD_COUNT(s, pad) (((s) - 1) / (pad) + 1) #define PAD_SIZE(s, pad) (PAD_COUNT(s, pad) * pad) #define ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, pad) \ - char __##name[ROUND(PAD_SIZE(size * sizeof(type), pad), align) \ + char __##name[ROUND(PAD_SIZE((size) * sizeof(type), pad), align) \ + (align - 1)]; \ \ type *name = (type *) ALIGN((uintptr_t)__##name, align) diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 905bacfa96..862614b5c2 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -354,10 +354,10 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_I2C_FSL #define CONFIG_SYS_FSL_I2C_SPEED 400000 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 /* * RapidIO diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index cdf689f875..348247050a 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -100,6 +100,7 @@ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ "env import -t $loadaddr $filesize\0" \ + "dfu_alt_info_ram=" DFU_ALT_INFO_RAM "\0" \ "ramargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${ramroot} " \ @@ -327,6 +328,11 @@ "kernel part 0 8;" \ "rootfs part 0 9" #endif +#define CONFIG_DFU_RAM +#define DFU_ALT_INFO_RAM \ + "kernel ram 0x80200000 0xD80000;" \ + "fdt ram 0x80F80000 0x80000;" \ + "ramdisk ram 0x81000000 0x4000000" /* * Default to using SPI for environment, etc. diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index c2d04a21c7..7321b60c2f 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -119,7 +119,7 @@ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SECT_SIZE 0x20000 /* Size of one Flash sector */ -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Use one Flash sector for enviroment */ +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Use one Flash sector for environment */ #define CONFIG_ENV_ADDR 0xFFFC0000 #define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */ diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index d63d0c4f54..0feef1eabb 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -305,7 +305,7 @@ #define CONFIG_ENV_IN_OWN_SECT 1 /* Define this to contain any number of null terminated strings that - * will be part of the default enviroment compiled into the boot image. + * will be part of the default environment compiled into the boot image. */ #define CONFIG_EXTRA_ENV_SETTINGS \ "quiet=0\0" \ diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 76fa500edd..79c00684dd 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -162,6 +162,14 @@ #define CONFIG_USB_STORAGE #endif +/* USB device */ +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_ATMEL_USBA +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D3xEK" + #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) #define CONFIG_CMD_FAT #endif diff --git a/include/dfu.h b/include/dfu.h index 47b90559d5..b2ecf1bebe 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -14,11 +14,13 @@ #include <common.h> #include <linux/list.h> #include <mmc.h> +#include <linux/usb/composite.h> enum dfu_device_type { DFU_DEV_MMC = 1, DFU_DEV_ONENAND, DFU_DEV_NAND, + DFU_DEV_RAM, }; enum dfu_layout { @@ -27,6 +29,12 @@ enum dfu_layout { DFU_FS_EXT2, DFU_FS_EXT3, DFU_FS_EXT4, + DFU_RAM_ADDR, +}; + +enum dfu_op { + DFU_OP_READ = 1, + DFU_OP_WRITE, }; struct mmc_internal_data { @@ -51,6 +59,11 @@ struct nand_internal_data { unsigned int ubi; }; +struct ram_internal_data { + void *start; + unsigned int size; +}; + static inline unsigned int get_mmc_blk_size(int dev) { return find_mmc_device(dev)->read_bl_len; @@ -62,7 +75,7 @@ static inline unsigned int get_mmc_blk_size(int dev) #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024*1024*8) /* 8 MiB */ #endif #ifndef CONFIG_SYS_DFU_MAX_FILE_SIZE -#define CONFIG_SYS_DFU_MAX_FILE_SIZE (4 << 20) /* 4 MiB */ +#define CONFIG_SYS_DFU_MAX_FILE_SIZE CONFIG_SYS_DFU_DATA_BUF_SIZE #endif struct dfu_entity { @@ -76,6 +89,7 @@ struct dfu_entity { union { struct mmc_internal_data mmc; struct nand_internal_data nand; + struct ram_internal_data ram; } data; int (*read_medium)(struct dfu_entity *dfu, @@ -113,6 +127,7 @@ struct dfu_entity *dfu_get_entity(int alt); char *dfu_extract_token(char** e, int *n); void dfu_trigger_reset(void); bool dfu_reset(void); +int dfu_init_env_entities(char *interface, int dev); int dfu_read(struct dfu_entity *de, void *buf, int size, int blk_seq_num); int dfu_write(struct dfu_entity *de, void *buf, int size, int blk_seq_num); @@ -137,4 +152,22 @@ static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) } #endif +#ifdef CONFIG_DFU_RAM +extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s); +#else +static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +{ + puts("RAM support not available!\n"); + return -1; +} +#endif + +#ifdef CONFIG_DFU_FUNCTION +int dfu_add(struct usb_configuration *c); +#else +int dfu_add(struct usb_configuration *c) +{ + return 0; +} +#endif #endif /* __DFU_ENTITY_H_ */ diff --git a/include/i2s.h b/include/i2s.h index aee52e7f14..8dd2cc388a 100644 --- a/include/i2s.h +++ b/include/i2s.h @@ -85,6 +85,7 @@ struct i2stx_info { unsigned int bitspersample; /* bits per sample */ unsigned int channels; /* audio channels */ unsigned int base_address; /* I2S Register Base */ + unsigned int id; /* I2S controller id */ }; /* diff --git a/include/libfdt.h b/include/libfdt.h index 765d84f5e4..9eefaaf5f8 100644 --- a/include/libfdt.h +++ b/include/libfdt.h @@ -596,9 +596,9 @@ const char *fdt_get_alias_namelen(const void *fdt, const char *name, int namelen); /** - * fdt_get_alias - retreive the path referenced by a given alias + * fdt_get_alias - retrieve the path referenced by a given alias * @fdt: pointer to the device tree blob - * @name: name of the alias th look up + * @name: name of the alias to look up * * fdt_get_alias() retrieves the value of a given alias. That is, the * value of the property named 'name' in the node /aliases. diff --git a/include/linux/usb/atmel_usba_udc.h b/include/linux/usb/atmel_usba_udc.h new file mode 100644 index 0000000000..be29ef0c5c --- /dev/null +++ b/include/linux/usb/atmel_usba_udc.h @@ -0,0 +1,26 @@ +/* + * Platform data definitions for Atmel USBA gadget driver + * [Original from Linux kernel: include/linux/usb/atmel_usba_udc.h] + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __LINUX_USB_USBA_H__ +#define __LINUX_USB_USBA_H__ + +struct usba_ep_data { + char *name; + int index; + int fifo_size; + int nr_banks; + int can_dma; + int can_isoc; +}; + +struct usba_platform_data { + int num_ep; + struct usba_ep_data *ep; +}; + +extern int usba_udc_probe(struct usba_platform_data *pdata); + +#endif /* __LINUX_USB_USBA_H */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 220d068600..a8a576316d 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -18,6 +18,7 @@ #ifndef __LINUX_USB_GADGET_H #define __LINUX_USB_GADGET_H +#include <errno.h> #include <linux/list.h> struct usb_ep; diff --git a/include/miiphy.h b/include/miiphy.h index 657b49624a..088797e4c6 100644 --- a/include/miiphy.h +++ b/include/miiphy.h @@ -1,5 +1,5 @@ /* - * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * SPDX-License-Identifier: GPL-2.0 IBM-pibs * * Additions (C) Copyright 2009 Industrie Dial Face S.p.A. */ diff --git a/include/mmc.h b/include/mmc.h index 228d77139d..214b9edc8d 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -335,7 +335,11 @@ int mmc_start_init(struct mmc *mmc); void mmc_set_preinit(struct mmc *mmc, int preinit); #ifdef CONFIG_GENERIC_MMC +#ifdef CONFIG_MMC_SPI #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI) +#else +#define mmc_host_is_spi(mmc) 0 +#endif struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); #else int mmc_legacy_init(int verbose); diff --git a/include/sdhci.h b/include/sdhci.h index b18b87312b..74d06ae18a 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -192,6 +192,8 @@ #define SDHCI_SPEC_200 1 #define SDHCI_SPEC_300 2 +#define SDHCI_GET_VERSION(x) (x->version & SDHCI_SPEC_VER_MASK) + /* * End of controller registers. */ @@ -210,6 +212,7 @@ #define SDHCI_QUIRK_NO_CD (1 << 5) #define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6) #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1 << 7) +#define SDHCI_QUIRK_USE_WIDE8 (1 << 8) /* to make gcc happy */ struct sdhci_host; diff --git a/include/usb_mass_storage.h b/include/usb_mass_storage.h index 35cdcc3d8c..e08deb4ddf 100644 --- a/include/usb_mass_storage.h +++ b/include/usb_mass_storage.h @@ -11,6 +11,7 @@ #define SECTOR_SIZE 0x200 #include <mmc.h> +#include <linux/usb/composite.h> struct ums_device { struct mmc *mmc; @@ -39,4 +40,12 @@ extern struct ums_board_info *board_ums_init(unsigned int, extern int usb_gadget_handle_interrupts(void); extern int fsg_main_thread(void *); +#ifdef CONFIG_USB_GADGET_MASS_STORAGE +int fsg_add(struct usb_configuration *c); +#else +int fsg_add(struct usb_configuration *c) +{ + return 0; +} +#endif #endif /* __USB_MASS_STORAGE_H__ */ diff --git a/lib/hashtable.c b/lib/hashtable.c index 644330a17e..c5a2b08bec 100644 --- a/lib/hashtable.c +++ b/lib/hashtable.c @@ -817,7 +817,7 @@ int himport_r(struct hsearch_data *htab, * size of 8 per entry (= safety factor of ~5) should provide enough * safety margin for any existing environment definitions and still * allow for more than enough dynamic additions. Note that the - * "size" argument is supposed to give the maximum enviroment size + * "size" argument is supposed to give the maximum environment size * (CONFIG_ENV_SIZE). This heuristics will result in * unreasonably large numbers (and thus memory footprint) for * big flash environments (>8,000 entries for 64 KB diff --git a/post/board/lwmon5/sysmon.c b/post/board/lwmon5/sysmon.c index da37d66bfa..cca1a26235 100644 --- a/post/board/lwmon5/sysmon.c +++ b/post/board/lwmon5/sysmon.c @@ -22,7 +22,7 @@ * * LCD backlight is not enabled if temperature values are not within * allowed ranges (-30 .. + 80). The brightness of backlite can be - * controlled by setting "brightness" enviroment variable. Default value is 50% + * controlled by setting "brightness" environment variable. Default value is 50% * * See the list of all parameters in the sysmon_table below */ diff --git a/tools/buildman/README b/tools/buildman/README index 734ada65a8..f63f278673 100644 --- a/tools/buildman/README +++ b/tools/buildman/README @@ -629,6 +629,28 @@ It is common when refactoring code for the rodata to decrease as the text size increases, and vice versa. +Providing 'make' flags +====================== + +U-Boot's build system supports a few flags (such as BUILD_TAG) which affect +the build product. These flags can be specified in the buildman settings +file. They can also be useful when building U-Boot against other open source +software. + +[make-flags] +at91-boards=ENABLE_AT91_TEST=1 +snapper9260=${at91-boards} BUILD_TAG=442 +snapper9g45=${at91-boards} BUILD_TAG=443 + +This will use 'make ENABLE_AT91_TEST=1 BUILD_TAG=442' for snapper9260 +and 'make ENABLE_AT91_TEST=1 BUILD_TAG=442' for snapper9g45. A special +variable ${target} is available to access the target name (snapper9260 and +snapper9g20 in this case). Variables are resolved recursively. + +It is expected that any variables added are dealt with in U-Boot's +config.mk file and documented in the README. + + Other options ============= diff --git a/tools/buildman/board.py b/tools/buildman/board.py index a388896417..1d3db206bd 100644 --- a/tools/buildman/board.py +++ b/tools/buildman/board.py @@ -5,16 +5,17 @@ class Board: """A particular board that we can build""" - def __init__(self, target, arch, cpu, board_name, vendor, soc, options): + def __init__(self, status, arch, cpu, soc, vendor, board_name, target, options): """Create a new board type. Args: - target: Target name (use make <target>_config to configure) + status: define whether the board is 'Active' or 'Orphaned' arch: Architecture name (e.g. arm) cpu: Cpu name (e.g. arm1136) - board_name: Name of board (e.g. integrator) - vendor: Name of vendor (e.g. armltd) soc: Name of SOC, or '' if none (e.g. mx31) + vendor: Name of vendor (e.g. armltd) + board_name: Name of board (e.g. integrator) + target: Target name (use make <target>_config to configure) options: board-specific options (e.g. integratorcp:CM1136) """ self.target = target @@ -63,8 +64,10 @@ class Boards: for upto in range(len(fields)): if fields[upto] == '-': fields[upto] = '' - while len(fields) < 9: + while len(fields) < 8: fields.append('') + if len(fields) > 8: + fields = fields[:8] board = Board(*fields) self.AddBoard(board) diff --git a/tools/buildman/bsettings.py b/tools/buildman/bsettings.py index c80113056c..916479866c 100644 --- a/tools/buildman/bsettings.py +++ b/tools/buildman/bsettings.py @@ -36,9 +36,6 @@ def GetItems(section): return settings.items(section) except ConfigParser.NoSectionError as e: print e - print ("Warning: No tool chains - please add a [toolchain] section " - "to your buildman config file %s. See README for details" % - config_fname) return [] except: raise diff --git a/tools/buildman/builder.py b/tools/buildman/builder.py index 29da67a54e..4a2d753c21 100644 --- a/tools/buildman/builder.py +++ b/tools/buildman/builder.py @@ -253,6 +253,7 @@ class BuilderThread(threading.Thread): args.extend(['-j', str(self.builder.num_jobs)]) config_args = ['%s_config' % brd.target] config_out = '' + args.extend(self.builder.toolchains.GetMakeArguments(brd)) # If we need to reconfigure, do that now if do_config: diff --git a/tools/buildman/buildman.py b/tools/buildman/buildman.py index 6fba2f292a..43895b87ea 100755 --- a/tools/buildman/buildman.py +++ b/tools/buildman/buildman.py @@ -32,6 +32,19 @@ import toolchain def RunTests(): import test + import doctest + + result = unittest.TestResult() + for module in ['toolchain']: + suite = doctest.DocTestSuite(module) + suite.run(result) + + # TODO: Surely we can just 'print' result? + print result + for test, err in result.errors: + print err + for test, err in result.failures: + print err sys.argv = [sys.argv[0]] suite = unittest.TestLoader().loadTestsFromTestCase(test.TestBuild) diff --git a/tools/buildman/test.py b/tools/buildman/test.py index bcdedfbf3f..068784a304 100644 --- a/tools/buildman/test.py +++ b/tools/buildman/test.py @@ -60,11 +60,11 @@ commits = [ ] boards = [ - ['board0', 'arm', 'armv7', 'ARM Board 1', 'Tester', '', ''], - ['board1', 'arm', 'armv7', 'ARM Board 2', 'Tester', '', ''], - ['board2', 'powerpc', 'powerpc', 'PowerPC board 1', 'Tester', '', ''], - ['board3', 'powerpc', 'mpc5xx', 'PowerPC board 2', 'Tester', '', ''], - ['board4', 'sandbox', 'sandbox', 'Sandbox board', 'Tester', '', ''] + ['Active', 'arm', 'armv7', '', 'Tester', 'ARM Board 1', 'board0', ''], + ['Active', 'arm', 'armv7', '', 'Tester', 'ARM Board 2', 'board1', ''], + ['Active', 'powerpc', 'powerpc', '', 'Tester', 'PowerPC board 1', 'board2', ''], + ['Active', 'powerpc', 'mpc5xx', '', 'Tester', 'PowerPC board 2', 'board3', ''], + ['Active', 'sandbox', 'sandbox', '', 'Tester', 'Sandbox board', 'board4', ''], ] class Options: diff --git a/tools/buildman/toolchain.py b/tools/buildman/toolchain.py index dfa1d00ce2..a292338b6d 100644 --- a/tools/buildman/toolchain.py +++ b/tools/buildman/toolchain.py @@ -3,6 +3,7 @@ # SPDX-License-Identifier: GPL-2.0+ # +import re import glob import os @@ -97,12 +98,18 @@ class Toolchains: def __init__(self): self.toolchains = {} self.paths = [] - for name, value in bsettings.GetItems('toolchain'): + toolchains = bsettings.GetItems('toolchain') + if not toolchains: + print ("Warning: No tool chains - please add a [toolchain] section" + " to your buildman config file %s. See README for details" % + config_fname) + + for name, value in toolchains: if '*' in value: self.paths += glob.glob(value) else: self.paths.append(value) - + self._make_flags = dict(bsettings.GetItems('make-flags')) def Add(self, fname, test=True, verbose=False): """Add a toolchain to our list @@ -167,3 +174,73 @@ class Toolchains: if not arch in self.toolchains: raise ValueError, ("No tool chain found for arch '%s'" % arch) return self.toolchains[arch] + + def ResolveReferences(self, var_dict, args): + """Resolve variable references in a string + + This converts ${blah} within the string to the value of blah. + This function works recursively. + + Args: + var_dict: Dictionary containing variables and their values + args: String containing make arguments + Returns: + Resolved string + + >>> bsettings.Setup() + >>> tcs = Toolchains() + >>> tcs.Add('fred', False) + >>> var_dict = {'oblique' : 'OBLIQUE', 'first' : 'fi${second}rst', \ + 'second' : '2nd'} + >>> tcs.ResolveReferences(var_dict, 'this=${oblique}_set') + 'this=OBLIQUE_set' + >>> tcs.ResolveReferences(var_dict, 'this=${oblique}_set${first}nd') + 'this=OBLIQUE_setfi2ndrstnd' + """ + re_var = re.compile('(\$\{[a-z0-9A-Z]{1,}\})') + + while True: + m = re_var.search(args) + if not m: + break + lookup = m.group(0)[2:-1] + value = var_dict.get(lookup, '') + args = args[:m.start(0)] + value + args[m.end(0):] + return args + + def GetMakeArguments(self, board): + """Returns 'make' arguments for a given board + + The flags are in a section called 'make-flags'. Flags are named + after the target they represent, for example snapper9260=TESTING=1 + will pass TESTING=1 to make when building the snapper9260 board. + + References to other boards can be added in the string also. For + example: + + [make-flags] + at91-boards=ENABLE_AT91_TEST=1 + snapper9260=${at91-boards} BUILD_TAG=442 + snapper9g45=${at91-boards} BUILD_TAG=443 + + This will return 'ENABLE_AT91_TEST=1 BUILD_TAG=442' for snapper9260 + and 'ENABLE_AT91_TEST=1 BUILD_TAG=443' for snapper9g45. + + A special 'target' variable is set to the board target. + + Args: + board: Board object for the board to check. + Returns: + 'make' flags for that board, or '' if none + """ + self._make_flags['target'] = board.target + arg_str = self.ResolveReferences(self._make_flags, + self._make_flags.get(board.target, '')) + args = arg_str.split(' ') + i = 0 + while i < len(args): + if not args[i]: + del args[i] + else: + i += 1 + return args diff --git a/tools/checkpatch.pl b/tools/checkpatch.pl index 896e2bc985..88c5bc7735 100755 --- a/tools/checkpatch.pl +++ b/tools/checkpatch.pl @@ -398,7 +398,7 @@ sub top_of_kernel_tree { my ($root) = @_; my @tree_check = ( - "COPYING", "CREDITS", "Kbuild", "MAINTAINERS", "Makefile", + "COPYING", "CREDITS", "Kbuild", "Makefile", "README", "Documentation", "arch", "include", "drivers", "fs", "init", "ipc", "kernel", "lib", "scripts", ); @@ -3701,7 +3701,7 @@ sub process { $vname has style problems, please review. If any of these errors are false positives, please report -them to the maintainer, see CHECKPATCH in MAINTAINERS. +them to the maintainer, see boards.cfg. EOM } diff --git a/tools/fit_image.c b/tools/fit_image.c index 47beaaff2a..0400a60678 100644 --- a/tools/fit_image.c +++ b/tools/fit_image.c @@ -23,7 +23,7 @@ static image_header_t header; static int fit_verify_header (unsigned char *ptr, int image_size, struct mkimage_params *params) { - return fdt_check_header ((void *)ptr); + return fdt_check_header(ptr); } static int fit_check_image_types (uint8_t type) |