diff options
-rw-r--r-- | CHANGELOG | 5 | ||||
-rw-r--r-- | cpu/mpc8xx/speed.c | 46 | ||||
-rw-r--r-- | include/configs/lwmon.h | 6 |
3 files changed, 38 insertions, 19 deletions
diff --git a/CHANGELOG b/CHANGELOG index 194564a1374..6c853c134fe 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,11 @@ Changes since U-Boot 1.0.1: ====================================================================== +* Make sure to use a bus clock divider of 2 only when running TQM8xxM + modules at CPU clock frequencies above 66 MHz. + +* Optimize flash programming speed for LWMON (by another 100% :-) + * Patch by Jian Zhang, 3 Feb 2004: - Changed the incorrect FAT12BUFSIZE - data_begin in fsdata can be negative. Changed it to be short. diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c index 8f8efce5052..aebfbcb1d77 100644 --- a/cpu/mpc8xx/speed.c +++ b/cpu/mpc8xx/speed.c @@ -64,18 +64,18 @@ static __inline__ void set_msr(unsigned long msr) * These strange values for the timing interval and prescaling are used * because the formula for the CPU clock is: * - * CPU clock = count * (177 * (8192 / 58)) + * CPU clock = count * (177 * (8192 / 58)) * - * = count * 24999.7241 + * = count * 24999.7241 * - * which is very close to + * which is very close to * - * = count * 25000 + * = count * 25000 * * Since the count gives the CPU clock divided by 25000, we can get * the CPU clock rounded to the nearest 0.1 MHz by * - * CPU clock = ((count + 2) / 4) * 100000; + * CPU clock = ((count + 2) / 4) * 100000; * * The rounding is important since the measurement is sometimes going * to be high or low by 0.025 MHz, depending on exactly how the clocks @@ -112,8 +112,8 @@ unsigned long measure_gclk(void) */ timerp->cpmt_tmr2 = ((177 - 1) << TMR_PS_SHIFT) | TMR_ICLK_IN_GEN; - timerp->cpmt_tcn2 = 0; /* reset state */ - timerp->cpmt_tgcr |= TGCR_RST2; /* enable timer 2 */ + timerp->cpmt_tcn2 = 0; /* reset state */ + timerp->cpmt_tgcr |= TGCR_RST2; /* enable timer 2 */ /* * PIT setup: @@ -148,9 +148,9 @@ unsigned long measure_gclk(void) /* spin until get exact count when we want to start */ while (immr->im_sit.sit_pitr > SPEED_PITC); - timerp->cpmt_tgcr &= ~TGCR_STP2; /* Start Timer 2 */ + timerp->cpmt_tgcr &= ~TGCR_STP2; /* Start Timer 2 */ while ((immr->im_sit.sit_piscr & PISCR_PS) == 0); - timerp->cpmt_tgcr |= TGCR_STP2; /* Stop Timer 2 */ + timerp->cpmt_tgcr |= TGCR_STP2; /* Stop Timer 2 */ /* re-enable external interrupts if they were on */ set_msr (msr_val); @@ -166,7 +166,7 @@ unsigned long measure_gclk(void) /* not using OSCM, using XIN, so scale appropriately */ return (((timer2_val + 2) / 4) * (CFG_8XX_XIN/512))/8192 * 100000L; #else - return ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */ + return ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */ #endif } @@ -224,8 +224,9 @@ int get_clocks_866 (void) DECLARE_GLOBAL_DATA_PTR; volatile immap_t *immr = (immap_t *) CFG_IMMR; - char tmp[64]; - long cpuclk = 0; + char tmp[64]; + long cpuclk = 0; + long sccr_reg; if (getenv_r ("cpuclk", tmp, sizeof (tmp)) > 0) cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000; @@ -238,10 +239,19 @@ int get_clocks_866 (void) gd->cpu_clk = measure_gclk (); #endif - if ((immr->im_clkrst.car_sccr & SCCR_EBDF11) == 0) + /* if cpu clock <= 66 MHz then set bus division factor to 1, + * otherwise set it to 2 + */ + sccr_reg = immr->im_clkrst.car_sccr; + sccr_reg &= ~SCCR_EBDF11; + if (gd->cpu_clk <= 66000000) { + sccr_reg |= SCCR_EBDF00; /* bus division factor = 1 */ gd->bus_clk = gd->cpu_clk; - else + } else { + sccr_reg |= SCCR_EBDF01; /* bus division factor = 2 */ gd->bus_clk = gd->cpu_clk / 2; + } + immr->im_clkrst.car_sccr = sccr_reg; return (0); } @@ -253,7 +263,7 @@ int sdram_adjust_866 (void) DECLARE_GLOBAL_DATA_PTR; volatile immap_t *immr = (immap_t *) CFG_IMMR; - long mamr; + long mamr; mamr = immr->im_memctl.memc_mamr; mamr &= ~MAMR_PTA_MSK; @@ -272,9 +282,9 @@ static long init_pll_866 (long clk) extern void plprcr_write_866 (long); volatile immap_t *immr = (immap_t *) CFG_IMMR; - long n, plprcr; - char mfi, mfn, mfd, s, pdf; - long step_mfi, step_mfn; + long n, plprcr; + char mfi, mfn, mfd, s, pdf; + long step_mfi, step_mfn; if (clk < 20000000) { clk *= 2; diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index 4917258ba39..d944ed88cdd 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -284,7 +284,11 @@ #define CFG_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */ #define CFG_FLASH_USE_BUFFER_WRITE #define CFG_FLASH_BUFFER_WRITE_TOUT 2048 /* Timeout for Flash Buffer Write (in ms) */ -#define CFG_FLASH_BUFFER_SIZE 32 /* Buffer size */ +/* Buffer size. + We have two flash devices connected in parallel. + Each device incorporates a Write Buffer of 32 bytes. + */ +#define CFG_FLASH_BUFFER_SIZE (2*32) #if 1 /* Put environment in flash which is much faster to boot */ |