diff options
Diffstat (limited to 'include/asm-mips/mipsregs.h')
-rw-r--r-- | include/asm-mips/mipsregs.h | 540 |
1 files changed, 540 insertions, 0 deletions
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h new file mode 100644 index 00000000000..56fc3da7856 --- /dev/null +++ b/include/asm-mips/mipsregs.h @@ -0,0 +1,540 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle + * Copyright (C) 2000 Silicon Graphics, Inc. + * Modified for further R[236]000 support by Paul M. Antoine, 1996. + * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + */ +#ifndef _ASM_MIPSREGS_H +#define _ASM_MIPSREGS_H + +#if 0 +#include <linux/linkage.h> +#endif + +/* + * The following macros are especially useful for __asm__ + * inline assembler. + */ +#ifndef __STR +#define __STR(x) #x +#endif +#ifndef STR +#define STR(x) __STR(x) +#endif + +/* + * Coprocessor 0 register names + */ +#define CP0_INDEX $0 +#define CP0_RANDOM $1 +#define CP0_ENTRYLO0 $2 +#define CP0_ENTRYLO1 $3 +#define CP0_CONF $3 +#define CP0_CONTEXT $4 +#define CP0_PAGEMASK $5 +#define CP0_WIRED $6 +#define CP0_INFO $7 +#define CP0_BADVADDR $8 +#define CP0_COUNT $9 +#define CP0_ENTRYHI $10 +#define CP0_COMPARE $11 +#define CP0_STATUS $12 +#define CP0_CAUSE $13 +#define CP0_EPC $14 +#define CP0_PRID $15 +#define CP0_CONFIG $16 +#define CP0_LLADDR $17 +#define CP0_WATCHLO $18 +#define CP0_WATCHHI $19 +#define CP0_XCONTEXT $20 +#define CP0_FRAMEMASK $21 +#define CP0_DIAGNOSTIC $22 +#define CP0_PERFORMANCE $25 +#define CP0_ECC $26 +#define CP0_CACHEERR $27 +#define CP0_TAGLO $28 +#define CP0_TAGHI $29 +#define CP0_ERROREPC $30 + +/* + * R4640/R4650 cp0 register names. These registers are listed + * here only for completeness; without MMU these CPUs are not useable + * by Linux. A future ELKS port might take make Linux run on them + * though ... + */ +#define CP0_IBASE $0 +#define CP0_IBOUND $1 +#define CP0_DBASE $2 +#define CP0_DBOUND $3 +#define CP0_CALG $17 +#define CP0_IWATCH $18 +#define CP0_DWATCH $19 + +/* + * Coprocessor 0 Set 1 register names + */ +#define CP0_S1_DERRADDR0 $26 +#define CP0_S1_DERRADDR1 $27 +#define CP0_S1_INTCONTROL $20 +/* + * Coprocessor 1 (FPU) register names + */ +#define CP1_REVISION $0 +#define CP1_STATUS $31 + +/* + * FPU Status Register Values + */ +/* + * Status Register Values + */ + +#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */ +#define FPU_CSR_COND 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND0 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND1 0x02000000 /* $fcc1 */ +#define FPU_CSR_COND2 0x04000000 /* $fcc2 */ +#define FPU_CSR_COND3 0x08000000 /* $fcc3 */ +#define FPU_CSR_COND4 0x10000000 /* $fcc4 */ +#define FPU_CSR_COND5 0x20000000 /* $fcc5 */ +#define FPU_CSR_COND6 0x40000000 /* $fcc6 */ +#define FPU_CSR_COND7 0x80000000 /* $fcc7 */ + +/* + * X the exception cause indicator + * E the exception enable + * S the sticky/flag bit +*/ +#define FPU_CSR_ALL_X 0x0003f000 +#define FPU_CSR_UNI_X 0x00020000 +#define FPU_CSR_INV_X 0x00010000 +#define FPU_CSR_DIV_X 0x00008000 +#define FPU_CSR_OVF_X 0x00004000 +#define FPU_CSR_UDF_X 0x00002000 +#define FPU_CSR_INE_X 0x00001000 + +#define FPU_CSR_ALL_E 0x00000f80 +#define FPU_CSR_INV_E 0x00000800 +#define FPU_CSR_DIV_E 0x00000400 +#define FPU_CSR_OVF_E 0x00000200 +#define FPU_CSR_UDF_E 0x00000100 +#define FPU_CSR_INE_E 0x00000080 + +#define FPU_CSR_ALL_S 0x0000007c +#define FPU_CSR_INV_S 0x00000040 +#define FPU_CSR_DIV_S 0x00000020 +#define FPU_CSR_OVF_S 0x00000010 +#define FPU_CSR_UDF_S 0x00000008 +#define FPU_CSR_INE_S 0x00000004 + +/* rounding mode */ +#define FPU_CSR_RN 0x0 /* nearest */ +#define FPU_CSR_RZ 0x1 /* towards zero */ +#define FPU_CSR_RU 0x2 /* towards +Infinity */ +#define FPU_CSR_RD 0x3 /* towards -Infinity */ + + +/* + * Values for PageMask register + */ +#include <linux/config.h> +#ifdef CONFIG_CPU_VR41XX +#define PM_1K 0x00000000 +#define PM_4K 0x00001800 +#define PM_16K 0x00007800 +#define PM_64K 0x0001f800 +#define PM_256K 0x0007f800 +#else +#define PM_4K 0x00000000 +#define PM_16K 0x00006000 +#define PM_64K 0x0001e000 +#define PM_256K 0x0007e000 +#define PM_1M 0x001fe000 +#define PM_4M 0x007fe000 +#define PM_16M 0x01ffe000 +#endif + +/* + * Values used for computation of new tlb entries + */ +#define PL_4K 12 +#define PL_16K 14 +#define PL_64K 16 +#define PL_256K 18 +#define PL_1M 20 +#define PL_4M 22 +#define PL_16M 24 + +/* + * Macros to access the system control coprocessor + */ +#define read_32bit_cp0_register(source) \ +({ int __res; \ + __asm__ __volatile__( \ + ".set\tpush\n\t" \ + ".set\treorder\n\t" \ + "mfc0\t%0,"STR(source)"\n\t" \ + ".set\tpop" \ + : "=r" (__res)); \ + __res;}) + +#define read_32bit_cp0_set1_register(source) \ +({ int __res; \ + __asm__ __volatile__( \ + ".set\tpush\n\t" \ + ".set\treorder\n\t" \ + "cfc0\t%0,"STR(source)"\n\t" \ + ".set\tpop" \ + : "=r" (__res)); \ + __res;}) + +/* + * For now use this only with interrupts disabled! + */ +#define read_64bit_cp0_register(source) \ +({ int __res; \ + __asm__ __volatile__( \ + ".set\tmips3\n\t" \ + "dmfc0\t%0,"STR(source)"\n\t" \ + ".set\tmips0" \ + : "=r" (__res)); \ + __res;}) + +#define write_32bit_cp0_register(register,value) \ + __asm__ __volatile__( \ + "mtc0\t%0,"STR(register)"\n\t" \ + "nop" \ + : : "r" (value)); + +#define write_32bit_cp0_set1_register(register,value) \ + __asm__ __volatile__( \ + "ctc0\t%0,"STR(register)"\n\t" \ + "nop" \ + : : "r" (value)); + +#define write_64bit_cp0_register(register,value) \ + __asm__ __volatile__( \ + ".set\tmips3\n\t" \ + "dmtc0\t%0,"STR(register)"\n\t" \ + ".set\tmips0" \ + : : "r" (value)) + +/* + * This should be changed when we get a compiler that support the MIPS32 ISA. + */ +#define read_mips32_cp0_config1() \ +({ int __res; \ + __asm__ __volatile__( \ + ".set\tnoreorder\n\t" \ + ".set\tnoat\n\t" \ + ".word\t0x40018001\n\t" \ + "move\t%0,$1\n\t" \ + ".set\tat\n\t" \ + ".set\treorder" \ + :"=r" (__res)); \ + __res;}) + +/* + * R4x00 interrupt enable / cause bits + */ +#define IE_SW0 (1<< 8) +#define IE_SW1 (1<< 9) +#define IE_IRQ0 (1<<10) +#define IE_IRQ1 (1<<11) +#define IE_IRQ2 (1<<12) +#define IE_IRQ3 (1<<13) +#define IE_IRQ4 (1<<14) +#define IE_IRQ5 (1<<15) + +/* + * R4x00 interrupt cause bits + */ +#define C_SW0 (1<< 8) +#define C_SW1 (1<< 9) +#define C_IRQ0 (1<<10) +#define C_IRQ1 (1<<11) +#define C_IRQ2 (1<<12) +#define C_IRQ3 (1<<13) +#define C_IRQ4 (1<<14) +#define C_IRQ5 (1<<15) + +#ifndef _LANGUAGE_ASSEMBLY +/* + * Manipulate the status register. + * Mostly used to access the interrupt bits. + */ +#define __BUILD_SET_CP0(name,register) \ +extern __inline__ unsigned int \ +set_cp0_##name(unsigned int set) \ +{ \ + unsigned int res; \ + \ + res = read_32bit_cp0_register(register); \ + res |= set; \ + write_32bit_cp0_register(register, res); \ + \ + return res; \ +} \ + \ +extern __inline__ unsigned int \ +clear_cp0_##name(unsigned int clear) \ +{ \ + unsigned int res; \ + \ + res = read_32bit_cp0_register(register); \ + res &= ~clear; \ + write_32bit_cp0_register(register, res); \ + \ + return res; \ +} \ + \ +extern __inline__ unsigned int \ +change_cp0_##name(unsigned int change, unsigned int new) \ +{ \ + unsigned int res; \ + \ + res = read_32bit_cp0_register(register); \ + res &= ~change; \ + res |= (new & change); \ + if(change) \ + write_32bit_cp0_register(register, res); \ + \ + return res; \ +} + +__BUILD_SET_CP0(status,CP0_STATUS) +__BUILD_SET_CP0(cause,CP0_CAUSE) +__BUILD_SET_CP0(config,CP0_CONFIG) + +#endif /* defined (_LANGUAGE_ASSEMBLY) */ + +/* + * Bitfields in the R4xx0 cp0 status register + */ +#define ST0_IE 0x00000001 +#define ST0_EXL 0x00000002 +#define ST0_ERL 0x00000004 +#define ST0_KSU 0x00000018 +# define KSU_USER 0x00000010 +# define KSU_SUPERVISOR 0x00000008 +# define KSU_KERNEL 0x00000000 +#define ST0_UX 0x00000020 +#define ST0_SX 0x00000040 +#define ST0_KX 0x00000080 +#define ST0_DE 0x00010000 +#define ST0_CE 0x00020000 + +/* + * Bitfields in the R[23]000 cp0 status register. + */ +#define ST0_IEC 0x00000001 +#define ST0_KUC 0x00000002 +#define ST0_IEP 0x00000004 +#define ST0_KUP 0x00000008 +#define ST0_IEO 0x00000010 +#define ST0_KUO 0x00000020 +/* bits 6 & 7 are reserved on R[23]000 */ +#define ST0_ISC 0x00010000 +#define ST0_SWC 0x00020000 +#define ST0_CM 0x00080000 + +/* + * Bits specific to the R4640/R4650 + */ +#define ST0_UM (1 << 4) +#define ST0_IL (1 << 23) +#define ST0_DL (1 << 24) + +/* + * Bitfields in the TX39 family CP0 Configuration Register 3 + */ +#define TX39_CONF_ICS_SHIFT 19 +#define TX39_CONF_ICS_MASK 0x00380000 +#define TX39_CONF_ICS_1KB 0x00000000 +#define TX39_CONF_ICS_2KB 0x00080000 +#define TX39_CONF_ICS_4KB 0x00100000 +#define TX39_CONF_ICS_8KB 0x00180000 +#define TX39_CONF_ICS_16KB 0x00200000 + +#define TX39_CONF_DCS_SHIFT 16 +#define TX39_CONF_DCS_MASK 0x00070000 +#define TX39_CONF_DCS_1KB 0x00000000 +#define TX39_CONF_DCS_2KB 0x00010000 +#define TX39_CONF_DCS_4KB 0x00020000 +#define TX39_CONF_DCS_8KB 0x00030000 +#define TX39_CONF_DCS_16KB 0x00040000 + +#define TX39_CONF_CWFON 0x00004000 +#define TX39_CONF_WBON 0x00002000 +#define TX39_CONF_RF_SHIFT 10 +#define TX39_CONF_RF_MASK 0x00000c00 +#define TX39_CONF_DOZE 0x00000200 +#define TX39_CONF_HALT 0x00000100 +#define TX39_CONF_LOCK 0x00000080 +#define TX39_CONF_ICE 0x00000020 +#define TX39_CONF_DCE 0x00000010 +#define TX39_CONF_IRSIZE_SHIFT 2 +#define TX39_CONF_IRSIZE_MASK 0x0000000c +#define TX39_CONF_DRSIZE_SHIFT 0 +#define TX39_CONF_DRSIZE_MASK 0x00000003 + +/* + * Status register bits available in all MIPS CPUs. + */ +#define ST0_IM 0x0000ff00 +#define STATUSB_IP0 8 +#define STATUSF_IP0 (1 << 8) +#define STATUSB_IP1 9 +#define STATUSF_IP1 (1 << 9) +#define STATUSB_IP2 10 +#define STATUSF_IP2 (1 << 10) +#define STATUSB_IP3 11 +#define STATUSF_IP3 (1 << 11) +#define STATUSB_IP4 12 +#define STATUSF_IP4 (1 << 12) +#define STATUSB_IP5 13 +#define STATUSF_IP5 (1 << 13) +#define STATUSB_IP6 14 +#define STATUSF_IP6 (1 << 14) +#define STATUSB_IP7 15 +#define STATUSF_IP7 (1 << 15) +#define STATUSB_IP8 0 +#define STATUSF_IP8 (1 << 0) +#define STATUSB_IP9 1 +#define STATUSF_IP9 (1 << 1) +#define STATUSB_IP10 2 +#define STATUSF_IP10 (1 << 2) +#define STATUSB_IP11 3 +#define STATUSF_IP11 (1 << 3) +#define STATUSB_IP12 4 +#define STATUSF_IP12 (1 << 4) +#define STATUSB_IP13 5 +#define STATUSF_IP13 (1 << 5) +#define STATUSB_IP14 6 +#define STATUSF_IP14 (1 << 6) +#define STATUSB_IP15 7 +#define STATUSF_IP15 (1 << 7) +#define ST0_CH 0x00040000 +#define ST0_SR 0x00100000 +#define ST0_BEV 0x00400000 +#define ST0_RE 0x02000000 +#define ST0_FR 0x04000000 +#define ST0_CU 0xf0000000 +#define ST0_CU0 0x10000000 +#define ST0_CU1 0x20000000 +#define ST0_CU2 0x40000000 +#define ST0_CU3 0x80000000 +#define ST0_XX 0x80000000 /* MIPS IV naming */ + +/* + * Bitfields and bit numbers in the coprocessor 0 cause register. + * + * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. + */ +#define CAUSEB_EXCCODE 2 +#define CAUSEF_EXCCODE (31 << 2) +#define CAUSEB_IP 8 +#define CAUSEF_IP (255 << 8) +#define CAUSEB_IP0 8 +#define CAUSEF_IP0 (1 << 8) +#define CAUSEB_IP1 9 +#define CAUSEF_IP1 (1 << 9) +#define CAUSEB_IP2 10 +#define CAUSEF_IP2 (1 << 10) +#define CAUSEB_IP3 11 +#define CAUSEF_IP3 (1 << 11) +#define CAUSEB_IP4 12 +#define CAUSEF_IP4 (1 << 12) +#define CAUSEB_IP5 13 +#define CAUSEF_IP5 (1 << 13) +#define CAUSEB_IP6 14 +#define CAUSEF_IP6 (1 << 14) +#define CAUSEB_IP7 15 +#define CAUSEF_IP7 (1 << 15) +#define CAUSEB_IV 23 +#define CAUSEF_IV (1 << 23) +#define CAUSEB_CE 28 +#define CAUSEF_CE (3 << 28) +#define CAUSEB_BD 31 +#define CAUSEF_BD (1 << 31) + +/* + * Bits in the coprozessor 0 config register. + */ +#define CONF_CM_CACHABLE_NO_WA 0 +#define CONF_CM_CACHABLE_WA 1 +#define CONF_CM_UNCACHED 2 +#define CONF_CM_CACHABLE_NONCOHERENT 3 +#define CONF_CM_CACHABLE_CE 4 +#define CONF_CM_CACHABLE_COW 5 +#define CONF_CM_CACHABLE_CUW 6 +#define CONF_CM_CACHABLE_ACCELERATED 7 +#define CONF_CM_CMASK 7 +#define CONF_DB (1 << 4) +#define CONF_IB (1 << 5) +#define CONF_SC (1 << 17) +#define CONF_AC (1 << 23) +#define CONF_HALT (1 << 25) + +/* + * R10000 performance counter definitions. + * + * FIXME: The R10000 performance counter opens a nice way to implement CPU + * time accounting with a precission of one cycle. I don't have + * R10000 silicon but just a manual, so ... + */ + +/* + * Events counted by counter #0 + */ +#define CE0_CYCLES 0 +#define CE0_INSN_ISSUED 1 +#define CE0_LPSC_ISSUED 2 +#define CE0_S_ISSUED 3 +#define CE0_SC_ISSUED 4 +#define CE0_SC_FAILED 5 +#define CE0_BRANCH_DECODED 6 +#define CE0_QW_WB_SECONDARY 7 +#define CE0_CORRECTED_ECC_ERRORS 8 +#define CE0_ICACHE_MISSES 9 +#define CE0_SCACHE_I_MISSES 10 +#define CE0_SCACHE_I_WAY_MISSPREDICTED 11 +#define CE0_EXT_INTERVENTIONS_REQ 12 +#define CE0_EXT_INVALIDATE_REQ 13 +#define CE0_VIRTUAL_COHERENCY_COND 14 +#define CE0_INSN_GRADUATED 15 + +/* + * Events counted by counter #1 + */ +#define CE1_CYCLES 0 +#define CE1_INSN_GRADUATED 1 +#define CE1_LPSC_GRADUATED 2 +#define CE1_S_GRADUATED 3 +#define CE1_SC_GRADUATED 4 +#define CE1_FP_INSN_GRADUATED 5 +#define CE1_QW_WB_PRIMARY 6 +#define CE1_TLB_REFILL 7 +#define CE1_BRANCH_MISSPREDICTED 8 +#define CE1_DCACHE_MISS 9 +#define CE1_SCACHE_D_MISSES 10 +#define CE1_SCACHE_D_WAY_MISSPREDICTED 11 +#define CE1_EXT_INTERVENTION_HITS 12 +#define CE1_EXT_INVALIDATE_REQ 13 +#define CE1_SP_HINT_TO_CEXCL_SC_BLOCKS 14 +#define CE1_SP_HINT_TO_SHARED_SC_BLOCKS 15 + +/* + * These flags define in which priviledge mode the counters count events + */ +#define CEB_USER 8 /* Count events in user mode, EXL = ERL = 0 */ +#define CEB_SUPERVISOR 4 /* Count events in supvervisor mode EXL = ERL = 0 */ +#define CEB_KERNEL 2 /* Count events in kernel mode EXL = ERL = 0 */ +#define CEB_EXL 1 /* Count events with EXL = 1, ERL = 0 */ + +#endif /* _ASM_MIPSREGS_H */ |