From 52409fae3e4b8d16b68b61902fc09075cd97b75d Mon Sep 17 00:00:00 2001 From: Dominik Sliwa Date: Sun, 2 Jul 2017 16:41:37 +0200 Subject: Backports generated from 4.11 kernel Initial commit. Signed-off-by: Dominik Sliwa --- drivers/net/usb/cdc_ether.c | 870 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 870 insertions(+) create mode 100644 drivers/net/usb/cdc_ether.c (limited to 'drivers/net/usb/cdc_ether.c') diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c new file mode 100644 index 0000000..20376e8 --- /dev/null +++ b/drivers/net/usb/cdc_ether.c @@ -0,0 +1,870 @@ +/* + * CDC Ethernet based networking peripherals + * Copyright (C) 2003-2005 by David Brownell + * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + */ + +// #define DEBUG // error path messages, extra info +// #define VERBOSE // more; success messages + +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#if IS_ENABLED(CPTCFG_USB_NET_RNDIS_HOST) + +static int is_rndis(struct usb_interface_descriptor *desc) +{ + return (desc->bInterfaceClass == USB_CLASS_COMM && + desc->bInterfaceSubClass == 2 && + desc->bInterfaceProtocol == 0xff); +} + +static int is_activesync(struct usb_interface_descriptor *desc) +{ + return (desc->bInterfaceClass == USB_CLASS_MISC && + desc->bInterfaceSubClass == 1 && + desc->bInterfaceProtocol == 1); +} + +static int is_wireless_rndis(struct usb_interface_descriptor *desc) +{ + return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER && + desc->bInterfaceSubClass == 1 && + desc->bInterfaceProtocol == 3); +} + +#else + +#define is_rndis(desc) 0 +#define is_activesync(desc) 0 +#define is_wireless_rndis(desc) 0 + +#endif + +static const u8 mbm_guid[16] = { + 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01, + 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a, +}; + +static void usbnet_cdc_update_filter(struct usbnet *dev) +{ + struct cdc_state *info = (void *) &dev->data; + struct usb_interface *intf = info->control; + struct net_device *net = dev->net; + + u16 cdc_filter = USB_CDC_PACKET_TYPE_DIRECTED + | USB_CDC_PACKET_TYPE_BROADCAST; + + /* filtering on the device is an optional feature and not worth + * the hassle so we just roughly care about snooping and if any + * multicast is requested, we take every multicast + */ + if (net->flags & IFF_PROMISC) + cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS; + if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI)) + cdc_filter |= USB_CDC_PACKET_TYPE_ALL_MULTICAST; + + usb_control_msg(dev->udev, + usb_sndctrlpipe(dev->udev, 0), + USB_CDC_SET_ETHERNET_PACKET_FILTER, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, + cdc_filter, + intf->cur_altsetting->desc.bInterfaceNumber, + NULL, + 0, + USB_CTRL_SET_TIMEOUT + ); +} + +/* probes control interface, claims data interface, collects the bulk + * endpoints, activates data interface (if needed), maybe sets MTU. + * all pure cdc, except for certain firmware workarounds, and knowing + * that rndis uses one different rule. + */ +int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf) +{ + u8 *buf = intf->cur_altsetting->extra; + int len = intf->cur_altsetting->extralen; + struct usb_interface_descriptor *d; + struct cdc_state *info = (void *) &dev->data; + int status; + int rndis; + bool android_rndis_quirk = false; + struct usb_driver *driver = driver_of(intf); + struct usb_cdc_parsed_header header; + + if (sizeof(dev->data) < sizeof(*info)) + return -EDOM; + + /* expect strict spec conformance for the descriptors, but + * cope with firmware which stores them in the wrong place + */ + if (len == 0 && dev->udev->actconfig->extralen) { + /* Motorola SB4100 (and others: Brad Hards says it's + * from a Broadcom design) put CDC descriptors here + */ + buf = dev->udev->actconfig->extra; + len = dev->udev->actconfig->extralen; + dev_dbg(&intf->dev, "CDC descriptors on config\n"); + } + + /* Maybe CDC descriptors are after the endpoint? This bug has + * been seen on some 2Wire Inc RNDIS-ish products. + */ + if (len == 0) { + struct usb_host_endpoint *hep; + + hep = intf->cur_altsetting->endpoint; + if (hep) { + buf = hep->extra; + len = hep->extralen; + } + if (len) + dev_dbg(&intf->dev, + "CDC descriptors on endpoint\n"); + } + + /* this assumes that if there's a non-RNDIS vendor variant + * of cdc-acm, it'll fail RNDIS requests cleanly. + */ + rndis = (is_rndis(&intf->cur_altsetting->desc) || + is_activesync(&intf->cur_altsetting->desc) || + is_wireless_rndis(&intf->cur_altsetting->desc)); + + memset(info, 0, sizeof(*info)); + info->control = intf; + + cdc_parse_cdc_header(&header, intf, buf, len); + + info->u = header.usb_cdc_union_desc; + info->header = header.usb_cdc_header_desc; + info->ether = header.usb_cdc_ether_desc; + if (!info->u) { + if (rndis) + goto skip; + else /* in that case a quirk is mandatory */ + goto bad_desc; + } + /* we need a master/control interface (what we're + * probed with) and a slave/data interface; union + * descriptors sort this all out. + */ + info->control = usb_ifnum_to_if(dev->udev, + info->u->bMasterInterface0); + info->data = usb_ifnum_to_if(dev->udev, + info->u->bSlaveInterface0); + if (!info->control || !info->data) { + dev_dbg(&intf->dev, + "master #%u/%p slave #%u/%p\n", + info->u->bMasterInterface0, + info->control, + info->u->bSlaveInterface0, + info->data); + /* fall back to hard-wiring for RNDIS */ + if (rndis) { + android_rndis_quirk = true; + goto skip; + } + goto bad_desc; + } + if (info->control != intf) { + dev_dbg(&intf->dev, "bogus CDC Union\n"); + /* Ambit USB Cable Modem (and maybe others) + * interchanges master and slave interface. + */ + if (info->data == intf) { + info->data = info->control; + info->control = intf; + } else + goto bad_desc; + } + + /* some devices merge these - skip class check */ + if (info->control == info->data) + goto skip; + + /* a data interface altsetting does the real i/o */ + d = &info->data->cur_altsetting->desc; + if (d->bInterfaceClass != USB_CLASS_CDC_DATA) { + dev_dbg(&intf->dev, "slave class %u\n", + d->bInterfaceClass); + goto bad_desc; + } +skip: + if ( rndis && + header.usb_cdc_acm_descriptor && + header.usb_cdc_acm_descriptor->bmCapabilities) { + dev_dbg(&intf->dev, + "ACM capabilities %02x, not really RNDIS?\n", + header.usb_cdc_acm_descriptor->bmCapabilities); + goto bad_desc; + } + + if (header.usb_cdc_ether_desc) { + dev->hard_mtu = le16_to_cpu(info->ether->wMaxSegmentSize); + /* because of Zaurus, we may be ignoring the host + * side link address we were given. + */ + } + + if (header.usb_cdc_mdlm_desc && + memcmp(header.usb_cdc_mdlm_desc->bGUID, mbm_guid, 16)) { + dev_dbg(&intf->dev, "GUID doesn't match\n"); + goto bad_desc; + } + + if (header.usb_cdc_mdlm_detail_desc && + header.usb_cdc_mdlm_detail_desc->bLength < + (sizeof(struct usb_cdc_mdlm_detail_desc) + 1)) { + dev_dbg(&intf->dev, "Descriptor too short\n"); + goto bad_desc; + } + + + + /* Microsoft ActiveSync based and some regular RNDIS devices lack the + * CDC descriptors, so we'll hard-wire the interfaces and not check + * for descriptors. + * + * Some Android RNDIS devices have a CDC Union descriptor pointing + * to non-existing interfaces. Ignore that and attempt the same + * hard-wired 0 and 1 interfaces. + */ + if (rndis && (!info->u || android_rndis_quirk)) { + info->control = usb_ifnum_to_if(dev->udev, 0); + info->data = usb_ifnum_to_if(dev->udev, 1); + if (!info->control || !info->data || info->control != intf) { + dev_dbg(&intf->dev, + "rndis: master #0/%p slave #1/%p\n", + info->control, + info->data); + goto bad_desc; + } + + } else if (!info->header || (!rndis && !info->ether)) { + dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n", + info->header ? "" : "header ", + info->u ? "" : "union ", + info->ether ? "" : "ether "); + goto bad_desc; + } + + /* claim data interface and set it up ... with side effects. + * network traffic can't flow until an altsetting is enabled. + */ + if (info->data != info->control) { + status = usb_driver_claim_interface(driver, info->data, dev); + if (status < 0) + return status; + } + status = usbnet_get_endpoints(dev, info->data); + if (status < 0) { + /* ensure immediate exit from usbnet_disconnect */ + usb_set_intfdata(info->data, NULL); + if (info->data != info->control) + usb_driver_release_interface(driver, info->data); + return status; + } + + /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */ + if (info->data != info->control) + dev->status = NULL; + if (info->control->cur_altsetting->desc.bNumEndpoints == 1) { + struct usb_endpoint_descriptor *desc; + + dev->status = &info->control->cur_altsetting->endpoint [0]; + desc = &dev->status->desc; + if (!usb_endpoint_is_int_in(desc) || + (le16_to_cpu(desc->wMaxPacketSize) + < sizeof(struct usb_cdc_notification)) || + !desc->bInterval) { + dev_dbg(&intf->dev, "bad notification endpoint\n"); + dev->status = NULL; + } + } + if (rndis && !dev->status) { + dev_dbg(&intf->dev, "missing RNDIS status endpoint\n"); + usb_set_intfdata(info->data, NULL); + usb_driver_release_interface(driver, info->data); + return -ENODEV; + } + + /* Some devices don't initialise properly. In particular + * the packet filter is not reset. There are devices that + * don't do reset all the way. So the packet filter should + * be set to a sane initial value. + */ + usbnet_cdc_update_filter(dev); + + return 0; + +bad_desc: + dev_info(&dev->udev->dev, "bad CDC descriptors\n"); + return -ENODEV; +} +EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind); + +void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf) +{ + struct cdc_state *info = (void *) &dev->data; + struct usb_driver *driver = driver_of(intf); + + /* combined interface - nothing to do */ + if (info->data == info->control) + return; + + /* disconnect master --> disconnect slave */ + if (intf == info->control && info->data) { + /* ensure immediate exit from usbnet_disconnect */ + usb_set_intfdata(info->data, NULL); + usb_driver_release_interface(driver, info->data); + info->data = NULL; + } + + /* and vice versa (just in case) */ + else if (intf == info->data && info->control) { + /* ensure immediate exit from usbnet_disconnect */ + usb_set_intfdata(info->control, NULL); + usb_driver_release_interface(driver, info->control); + info->control = NULL; + } +} +EXPORT_SYMBOL_GPL(usbnet_cdc_unbind); + +/* Communications Device Class, Ethernet Control model + * + * Takes two interfaces. The DATA interface is inactive till an altsetting + * is selected. Configuration data includes class descriptors. There's + * an optional status endpoint on the control interface. + * + * This should interop with whatever the 2.4 "CDCEther.c" driver + * (by Brad Hards) talked with, with more functionality. + */ + +static void dumpspeed(struct usbnet *dev, __le32 *speeds) +{ + netif_info(dev, timer, dev->net, + "link speeds: %u kbps up, %u kbps down\n", + __le32_to_cpu(speeds[0]) / 1000, + __le32_to_cpu(speeds[1]) / 1000); +} + +void usbnet_cdc_status(struct usbnet *dev, struct urb *urb) +{ + struct usb_cdc_notification *event; + + if (urb->actual_length < sizeof(*event)) + return; + + /* SPEED_CHANGE can get split into two 8-byte packets */ + if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) { + dumpspeed(dev, (__le32 *) urb->transfer_buffer); + return; + } + + event = urb->transfer_buffer; + switch (event->bNotificationType) { + case USB_CDC_NOTIFY_NETWORK_CONNECTION: + netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n", + event->wValue ? "on" : "off"); + usbnet_link_change(dev, !!event->wValue, 0); + break; + case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */ + netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n", + urb->actual_length); + if (urb->actual_length != (sizeof(*event) + 8)) + set_bit(EVENT_STS_SPLIT, &dev->flags); + else + dumpspeed(dev, (__le32 *) &event[1]); + break; + /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS), + * but there are no standard formats for the response data. + */ + default: + netdev_err(dev->net, "CDC: unexpected notification %02x!\n", + event->bNotificationType); + break; + } +} +EXPORT_SYMBOL_GPL(usbnet_cdc_status); + +int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status; + struct cdc_state *info = (void *) &dev->data; + + BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) + < sizeof(struct cdc_state))); + + status = usbnet_generic_cdc_bind(dev, intf); + if (status < 0) + return status; + + status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress); + if (status < 0) { + usb_set_intfdata(info->data, NULL); + usb_driver_release_interface(driver_of(intf), info->data); + return status; + } + + return 0; +} +EXPORT_SYMBOL_GPL(usbnet_cdc_bind); + +static int usbnet_cdc_zte_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status = usbnet_cdc_bind(dev, intf); + + if (!status && (dev->net->dev_addr[0] & 0x02)) + eth_hw_addr_random(dev->net); + + return status; +} + +/* Make sure packets have correct destination MAC address + * + * A firmware bug observed on some devices (ZTE MF823/831/910) is that the + * device sends packets with a static, bogus, random MAC address (event if + * device MAC address has been updated). Always set MAC address to that of the + * device. + */ +static int usbnet_cdc_zte_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + if (skb->len < ETH_HLEN || !(skb->data[0] & 0x02)) + return 1; + + skb_reset_mac_header(skb); + ether_addr_copy(eth_hdr(skb)->h_dest, dev->net->dev_addr); + + return 1; +} + +/* Ensure correct link state + * + * Some devices (ZTE MF823/831/910) export two carrier on notifications when + * connected. This causes the link state to be incorrect. Work around this by + * always setting the state to off, then on. + */ +static void usbnet_cdc_zte_status(struct usbnet *dev, struct urb *urb) +{ + struct usb_cdc_notification *event; + + if (urb->actual_length < sizeof(*event)) + return; + + event = urb->transfer_buffer; + + if (event->bNotificationType != USB_CDC_NOTIFY_NETWORK_CONNECTION) { + usbnet_cdc_status(dev, urb); + return; + } + + netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n", + event->wValue ? "on" : "off"); + + if (event->wValue && + netif_carrier_ok(dev->net)) + netif_carrier_off(dev->net); + + usbnet_link_change(dev, !!event->wValue, 0); +} + +static const struct driver_info cdc_info = { + .description = "CDC Ethernet Device", + .flags = FLAG_ETHER | FLAG_POINTTOPOINT, + .bind = usbnet_cdc_bind, + .unbind = usbnet_cdc_unbind, + .status = usbnet_cdc_status, + .set_rx_mode = usbnet_cdc_update_filter, + .manage_power = usbnet_manage_power, +}; + +static const struct driver_info zte_cdc_info = { + .description = "ZTE CDC Ethernet Device", + .flags = FLAG_ETHER | FLAG_POINTTOPOINT, + .bind = usbnet_cdc_zte_bind, + .unbind = usbnet_cdc_unbind, + .status = usbnet_cdc_zte_status, + .set_rx_mode = usbnet_cdc_update_filter, + .manage_power = usbnet_manage_power, + .rx_fixup = usbnet_cdc_zte_rx_fixup, +}; + +static const struct driver_info wwan_info = { + .description = "Mobile Broadband Network Device", + .flags = FLAG_WWAN, + .bind = usbnet_cdc_bind, + .unbind = usbnet_cdc_unbind, + .status = usbnet_cdc_status, + .set_rx_mode = usbnet_cdc_update_filter, + .manage_power = usbnet_manage_power, +}; + +/*-------------------------------------------------------------------------*/ + +#define HUAWEI_VENDOR_ID 0x12D1 +#define NOVATEL_VENDOR_ID 0x1410 +#define ZTE_VENDOR_ID 0x19D2 +#define DELL_VENDOR_ID 0x413C +#define REALTEK_VENDOR_ID 0x0bda +#define SAMSUNG_VENDOR_ID 0x04e8 +#define LENOVO_VENDOR_ID 0x17ef +#define NVIDIA_VENDOR_ID 0x0955 +#define HP_VENDOR_ID 0x03f0 +#define MICROSOFT_VENDOR_ID 0x045e + +static const struct usb_device_id products[] = { +/* BLACKLIST !! + * + * First blacklist any products that are egregiously nonconformant + * with the CDC Ethernet specs. Minor braindamage we cope with; when + * they're not even trying, needing a separate driver is only the first + * of the differences to show up. + */ + +#define ZAURUS_MASTER_INTERFACE \ + .bInterfaceClass = USB_CLASS_COMM, \ + .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ + .bInterfaceProtocol = USB_CDC_PROTO_NONE + +/* SA-1100 based Sharp Zaurus ("collie"), or compatible; + * wire-incompatible with true CDC Ethernet implementations. + * (And, it seems, needlessly so...) + */ +{ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x8004, + ZAURUS_MASTER_INTERFACE, + .driver_info = 0, +}, + +/* PXA-25x based Sharp Zaurii. Note that it seems some of these + * (later models especially) may have shipped only with firmware + * advertising false "CDC MDLM" compatibility ... but we're not + * clear which models did that, so for now let's assume the worst. + */ +{ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x8005, /* A-300 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = 0, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x8006, /* B-500/SL-5600 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = 0, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x8007, /* C-700 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = 0, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x9031, /* C-750 C-760 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = 0, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x9032, /* SL-6000 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = 0, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + /* reported with some C860 units */ + .idProduct = 0x9050, /* C-860 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = 0, +}, + +/* Olympus has some models with a Zaurus-compatible option. + * R-1000 uses a FreeScale i.MXL cpu (ARMv4T) + */ +{ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x07B4, + .idProduct = 0x0F02, /* R-1000 */ + ZAURUS_MASTER_INTERFACE, + .driver_info = 0, +}, + +/* LG Electronics VL600 wants additional headers on every frame */ +{ + USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */ +{ + USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Novatel USB551L and MC551 - handled by qmi_wwan */ +{ + USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Novatel E362 - handled by qmi_wwan */ +{ + USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */ +{ + USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */ +{ + USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */ +{ + USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Novatel Expedite E371 - handled by qmi_wwan */ +{ + USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* HP lt2523 (Novatel E371) - handled by qmi_wwan */ +{ + USB_DEVICE_AND_INTERFACE_INFO(HP_VENDOR_ID, 0x421d, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* AnyDATA ADU960S - handled by qmi_wwan */ +{ + USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Huawei E1820 - handled by qmi_wwan */ +{ + USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1), + .driver_info = 0, +}, + +/* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */ +{ + USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */ +{ + USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Samsung USB Ethernet Adapters */ +{ + USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* ThinkPad USB-C Dock (based on Realtek RTL8153) */ +{ + USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3062, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* ThinkPad Thunderbolt 3 Dock (based on Realtek RTL8153) */ +{ + USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3069, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Lenovo Thinkpad USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */ +{ + USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7205, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Lenovo USB C to Ethernet Adapter (based on Realtek RTL8153) */ +{ + USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x720c, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Lenovo USB-C Travel Hub (based on Realtek RTL8153) */ +{ + USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7214, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* NVIDIA Tegra USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */ +{ + USB_DEVICE_AND_INTERFACE_INFO(NVIDIA_VENDOR_ID, 0x09ff, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Microsoft Surface 2 dock (based on Realtek RTL8152) */ +{ + USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07ab, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* Microsoft Surface 3 dock (based on Realtek RTL8153) */ +{ + USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07c6, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* WHITELIST!!! + * + * CDC Ether uses two interfaces, not necessarily consecutive. + * We match the main interface, ignoring the optional device + * class so we could handle devices that aren't exclusively + * CDC ether. + * + * NOTE: this match must come AFTER entries blacklisting devices + * because of bugs/quirks in a given product (like Zaurus, above). + */ +{ + /* ZTE (Vodafone) K3805-Z */ + USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&wwan_info, +}, { + /* ZTE (Vodafone) K3806-Z */ + USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&wwan_info, +}, { + /* ZTE (Vodafone) K4510-Z */ + USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&wwan_info, +}, { + /* ZTE (Vodafone) K3770-Z */ + USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&wwan_info, +}, { + /* ZTE (Vodafone) K3772-Z */ + USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&wwan_info, +}, { + /* Telit modules */ + USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = (kernel_ulong_t) &wwan_info, +}, { + /* Dell DW5580 modules */ + USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x81ba, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = (kernel_ulong_t)&wwan_info, +}, { + /* ZTE modules */ + USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&zte_cdc_info, +}, { + USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&wwan_info, + +}, { + /* Various Huawei modems with a network port like the UMG1831 */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, 255), + .driver_info = (unsigned long)&wwan_info, +}, + { }, /* END */ +}; +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver cdc_driver = { + .name = "cdc_ether", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, + .reset_resume = usbnet_resume, + .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(cdc_driver); + +MODULE_AUTHOR("David Brownell"); +MODULE_DESCRIPTION("USB CDC Ethernet devices"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3