From 348fa3f6871f56a37dcd16c99ca98118c6d79a38 Mon Sep 17 00:00:00 2001 From: Dominik Sliwa Date: Mon, 4 Mar 2019 12:01:54 +0100 Subject: Backports v4.19.24 Backports generated by toradex backports 515a1fa55cda2b1d952872e1786857481bd54fcc against mainline kernel tag v4.19.24 Signed-off-by: Dominik Sliwa --- drivers/net/wireless/ath/ath5k/ath5k.h | 1718 ++++++++++++++++++++++++++++++++ 1 file changed, 1718 insertions(+) create mode 100644 drivers/net/wireless/ath/ath5k/ath5k.h (limited to 'drivers/net/wireless/ath/ath5k/ath5k.h') diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h new file mode 100644 index 0000000..f73c794 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -0,0 +1,1718 @@ +/* + * Copyright (c) 2004-2007 Reyk Floeter + * Copyright (c) 2006-2007 Nick Kossifidis + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _ATH5K_H +#define _ATH5K_H + +/* TODO: Clean up channel debugging (doesn't work anyway) and start + * working on reg. control code using all available eeprom information + * (rev. engineering needed) */ +#define CHAN_DEBUG 0 + +#include +#include +#include +#include +#include +#include +#include + +/* RX/TX descriptor hw structs + * TODO: Driver part should only see sw structs */ +#include "desc.h" + +/* EEPROM structs/offsets + * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) + * and clean up common bits, then introduce set/get functions in eeprom.c */ +#include "eeprom.h" +#include "debug.h" +#include "../ath.h" +#include "ani.h" + +/* PCI IDs */ +#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ +#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ +#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ +#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ +#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ +#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ +#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ +#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ +#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ +#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ + +/****************************\ + GENERIC DRIVER DEFINITIONS +\****************************/ + +#define ATH5K_PRINTF(fmt, ...) \ + pr_warn("%s: " fmt, __func__, ##__VA_ARGS__) + +void __printf(3, 4) +_ath5k_printk(const struct ath5k_hw *ah, const char *level, + const char *fmt, ...); + +#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ + _ath5k_printk(_sc, _level, _fmt, ##__VA_ARGS__) + +#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) \ +do { \ + if (net_ratelimit()) \ + ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ +} while (0) + +#define ATH5K_INFO(_sc, _fmt, ...) \ + ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) + +#define ATH5K_WARN(_sc, _fmt, ...) \ + ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) + +#define ATH5K_ERR(_sc, _fmt, ...) \ + ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) + +/* + * AR5K REGISTER ACCESS + */ + +/* Some macros to read/write fields */ + +/* First shift, then mask */ +#define AR5K_REG_SM(_val, _flags) \ + (((_val) << _flags##_S) & (_flags)) + +/* First mask, then shift */ +#define AR5K_REG_MS(_val, _flags) \ + (((_val) & (_flags)) >> _flags##_S) + +/* Some registers can hold multiple values of interest. For this + * reason when we want to write to these registers we must first + * retrieve the values which we do not want to clear (lets call this + * old_data) and then set the register with this and our new_value: + * ( old_data | new_value) */ +#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ + (((_val) << _flags##_S) & (_flags)), _reg) + +#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ + (_mask)) | (_flags), _reg) + +#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) + +#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) + +/* Access QCU registers per queue */ +#define AR5K_REG_READ_Q(ah, _reg, _queue) \ + (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ + +#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ + ath5k_hw_reg_write(ah, (1 << _queue), _reg) + +#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ + _reg |= 1 << _queue; \ +} while (0) + +#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ + _reg &= ~(1 << _queue); \ +} while (0) + +/* Used while writing initvals */ +#define AR5K_REG_WAIT(_i) do { \ + if (_i % 64) \ + udelay(1); \ +} while (0) + +/* + * Some tunable values (these should be changeable by the user) + * TODO: Make use of them and add more options OR use debug/configfs + */ +#define AR5K_TUNE_DMA_BEACON_RESP 2 +#define AR5K_TUNE_SW_BEACON_RESP 10 +#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 +#define AR5K_TUNE_MIN_TX_FIFO_THRES 1 +#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_FRAME_LEN / 64) + 1) +#define AR5K_TUNE_REGISTER_TIMEOUT 20000 +/* Register for RSSI threshold has a mask of 0xff, so 255 seems to + * be the max value. */ +#define AR5K_TUNE_RSSI_THRES 129 +/* This must be set when setting the RSSI threshold otherwise it can + * prevent a reset. If AR5K_RSSI_THR is read after writing to it + * the BMISS_THRES will be seen as 0, seems hardware doesn't keep + * track of it. Max value depends on hardware. For AR5210 this is just 7. + * For AR5211+ this seems to be up to 255. */ +#define AR5K_TUNE_BMISS_THRES 7 +#define AR5K_TUNE_REGISTER_DWELL_TIME 20000 +#define AR5K_TUNE_BEACON_INTERVAL 100 +#define AR5K_TUNE_AIFS 2 +#define AR5K_TUNE_AIFS_11B 2 +#define AR5K_TUNE_AIFS_XR 0 +#define AR5K_TUNE_CWMIN 15 +#define AR5K_TUNE_CWMIN_11B 31 +#define AR5K_TUNE_CWMIN_XR 3 +#define AR5K_TUNE_CWMAX 1023 +#define AR5K_TUNE_CWMAX_11B 1023 +#define AR5K_TUNE_CWMAX_XR 7 +#define AR5K_TUNE_NOISE_FLOOR -72 +#define AR5K_TUNE_CCA_MAX_GOOD_VALUE -95 +#define AR5K_TUNE_MAX_TXPOWER 63 +#define AR5K_TUNE_DEFAULT_TXPOWER 25 +#define AR5K_TUNE_TPC_TXPOWER false +#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 60000 /* 60 sec */ +#define ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT 10000 /* 10 sec */ +#define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */ +#define ATH5K_TX_COMPLETE_POLL_INT 3000 /* 3 sec */ + +#define AR5K_INIT_CARR_SENSE_EN 1 + +/*Swap RX/TX Descriptor for big endian archs*/ +#if defined(__BIG_ENDIAN) +#define AR5K_INIT_CFG ( \ + AR5K_CFG_SWTD | AR5K_CFG_SWRD \ +) +#else +#define AR5K_INIT_CFG 0x00000000 +#endif + +/* Initial values */ +#define AR5K_INIT_CYCRSSI_THR1 2 + +/* Tx retry limit defaults from standard */ +#define AR5K_INIT_RETRY_SHORT 7 +#define AR5K_INIT_RETRY_LONG 4 + +/* Slot time */ +#define AR5K_INIT_SLOT_TIME_TURBO 6 +#define AR5K_INIT_SLOT_TIME_DEFAULT 9 +#define AR5K_INIT_SLOT_TIME_HALF_RATE 13 +#define AR5K_INIT_SLOT_TIME_QUARTER_RATE 21 +#define AR5K_INIT_SLOT_TIME_B 20 +#define AR5K_SLOT_TIME_MAX 0xffff + +/* SIFS */ +#define AR5K_INIT_SIFS_TURBO 6 +#define AR5K_INIT_SIFS_DEFAULT_BG 10 +#define AR5K_INIT_SIFS_DEFAULT_A 16 +#define AR5K_INIT_SIFS_HALF_RATE 32 +#define AR5K_INIT_SIFS_QUARTER_RATE 64 + +/* Used to calculate tx time for non 5/10/40MHz + * operation */ +/* It's preamble time + signal time (16 + 4) */ +#define AR5K_INIT_OFDM_PREAMPLE_TIME 20 +/* Preamble time for 40MHz (turbo) operation (min ?) */ +#define AR5K_INIT_OFDM_PREAMBLE_TIME_MIN 14 +#define AR5K_INIT_OFDM_SYMBOL_TIME 4 +#define AR5K_INIT_OFDM_PLCP_BITS 22 + +/* Rx latency for 5 and 10MHz operation (max ?) */ +#define AR5K_INIT_RX_LAT_MAX 63 +/* Tx latencies from initvals (5212 only but no problem + * because we only tweak them on 5212) */ +#define AR5K_INIT_TX_LAT_A 54 +#define AR5K_INIT_TX_LAT_BG 384 +/* Tx latency for 40MHz (turbo) operation (min ?) */ +#define AR5K_INIT_TX_LAT_MIN 32 +/* Default Tx/Rx latencies (same for 5211)*/ +#define AR5K_INIT_TX_LATENCY_5210 54 +#define AR5K_INIT_RX_LATENCY_5210 29 + +/* Tx frame to Tx data start delay */ +#define AR5K_INIT_TXF2TXD_START_DEFAULT 14 +#define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ 12 +#define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ 13 + +/* We need to increase PHY switch and agc settling time + * on turbo mode */ +#define AR5K_SWITCH_SETTLING 5760 +#define AR5K_SWITCH_SETTLING_TURBO 7168 + +#define AR5K_AGC_SETTLING 28 +/* 38 on 5210 but shouldn't matter */ +#define AR5K_AGC_SETTLING_TURBO 37 + + + +/*****************************\ +* GENERIC CHIPSET DEFINITIONS * +\*****************************/ + +/** + * enum ath5k_version - MAC Chips + * @AR5K_AR5210: AR5210 (Crete) + * @AR5K_AR5211: AR5211 (Oahu/Maui) + * @AR5K_AR5212: AR5212 (Venice) and newer + */ +enum ath5k_version { + AR5K_AR5210 = 0, + AR5K_AR5211 = 1, + AR5K_AR5212 = 2, +}; + +/** + * enum ath5k_radio - PHY Chips + * @AR5K_RF5110: RF5110 (Fez) + * @AR5K_RF5111: RF5111 (Sombrero) + * @AR5K_RF5112: RF2112/5112(A) (Derby/Derby2) + * @AR5K_RF2413: RF2413/2414 (Griffin/Griffin-Lite) + * @AR5K_RF5413: RF5413/5414/5424 (Eagle/Condor) + * @AR5K_RF2316: RF2315/2316 (Cobra SoC) + * @AR5K_RF2317: RF2317 (Spider SoC) + * @AR5K_RF2425: RF2425/2417 (Swan/Nalla) + */ +enum ath5k_radio { + AR5K_RF5110 = 0, + AR5K_RF5111 = 1, + AR5K_RF5112 = 2, + AR5K_RF2413 = 3, + AR5K_RF5413 = 4, + AR5K_RF2316 = 5, + AR5K_RF2317 = 6, + AR5K_RF2425 = 7, +}; + +/* + * Common silicon revision/version values + */ + +#define AR5K_SREV_UNKNOWN 0xffff + +#define AR5K_SREV_AR5210 0x00 /* Crete */ +#define AR5K_SREV_AR5311 0x10 /* Maui 1 */ +#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */ +#define AR5K_SREV_AR5311B 0x30 /* Spirit */ +#define AR5K_SREV_AR5211 0x40 /* Oahu */ +#define AR5K_SREV_AR5212 0x50 /* Venice */ +#define AR5K_SREV_AR5312_R2 0x52 /* AP31 */ +#define AR5K_SREV_AR5212_V4 0x54 /* ??? */ +#define AR5K_SREV_AR5213 0x55 /* ??? */ +#define AR5K_SREV_AR5312_R7 0x57 /* AP30 */ +#define AR5K_SREV_AR2313_R8 0x58 /* AP43 */ +#define AR5K_SREV_AR5213A 0x59 /* Hainan */ +#define AR5K_SREV_AR2413 0x78 /* Griffin lite */ +#define AR5K_SREV_AR2414 0x70 /* Griffin */ +#define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */ +#define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */ +#define AR5K_SREV_AR5424 0x90 /* Condor */ +#define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */ +#define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */ +#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ +#define AR5K_SREV_AR5414 0xa0 /* Eagle */ +#define AR5K_SREV_AR2415 0xb0 /* Talon */ +#define AR5K_SREV_AR5416 0xc0 /* PCI-E */ +#define AR5K_SREV_AR5418 0xca /* PCI-E */ +#define AR5K_SREV_AR2425 0xe0 /* Swan */ +#define AR5K_SREV_AR2417 0xf0 /* Nala */ + +#define AR5K_SREV_RAD_5110 0x00 +#define AR5K_SREV_RAD_5111 0x10 +#define AR5K_SREV_RAD_5111A 0x15 +#define AR5K_SREV_RAD_2111 0x20 +#define AR5K_SREV_RAD_5112 0x30 +#define AR5K_SREV_RAD_5112A 0x35 +#define AR5K_SREV_RAD_5112B 0x36 +#define AR5K_SREV_RAD_2112 0x40 +#define AR5K_SREV_RAD_2112A 0x45 +#define AR5K_SREV_RAD_2112B 0x46 +#define AR5K_SREV_RAD_2413 0x50 +#define AR5K_SREV_RAD_5413 0x60 +#define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */ +#define AR5K_SREV_RAD_2317 0x80 +#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */ +#define AR5K_SREV_RAD_2425 0xa2 +#define AR5K_SREV_RAD_5133 0xc0 + +#define AR5K_SREV_PHY_5211 0x30 +#define AR5K_SREV_PHY_5212 0x41 +#define AR5K_SREV_PHY_5212A 0x42 +#define AR5K_SREV_PHY_5212B 0x43 +#define AR5K_SREV_PHY_2413 0x45 +#define AR5K_SREV_PHY_5413 0x61 +#define AR5K_SREV_PHY_2425 0x70 + +/* TODO add support to mac80211 for vendor-specific rates and modes */ + +/** + * DOC: Atheros XR + * + * Some of this information is based on Documentation from: + * + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG + * + * Atheros' eXtended Range - range enhancing extension is a modulation scheme + * that is supposed to double the link distance between an Atheros XR-enabled + * client device with an Atheros XR-enabled access point. This is achieved + * by increasing the receiver sensitivity up to, -105dBm, which is about 20dB + * above what the 802.11 specifications demand. In addition, new (proprietary) + * data rates are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. + * + * Please note that can you either use XR or TURBO but you cannot use both, + * they are exclusive. + * + * Also note that we do not plan to support XR mode at least for now. You can + * get a mode similar to XR by using 5MHz bwmode. + */ + + +/** + * DOC: Atheros SuperAG + * + * In addition to XR we have another modulation scheme called TURBO mode + * that is supposed to provide a throughput transmission speed up to 40Mbit/s + * -60Mbit/s at a 108Mbit/s signaling rate achieved through the bonding of two + * 54Mbit/s 802.11g channels. To use this feature both ends must support it. + * There is also a distinction between "static" and "dynamic" turbo modes: + * + * - Static: is the dumb version: devices set to this mode stick to it until + * the mode is turned off. + * + * - Dynamic: is the intelligent version, the network decides itself if it + * is ok to use turbo. As soon as traffic is detected on adjacent channels + * (which would get used in turbo mode), or when a non-turbo station joins + * the network, turbo mode won't be used until the situation changes again. + * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which + * monitors the used radio band in order to decide whether turbo mode may + * be used or not. + * + * This article claims Super G sticks to bonding of channels 5 and 6 for + * USA: + * + * http://www.pcworld.com/article/id,113428-page,1/article.html + * + * The channel bonding seems to be driver specific though. + * + * In addition to TURBO modes we also have the following features for even + * greater speed-up: + * + * - Bursting: allows multiple frames to be sent at once, rather than pausing + * after each frame. Bursting is a standards-compliant feature that can be + * used with any Access Point. + * + * - Fast frames: increases the amount of information that can be sent per + * frame, also resulting in a reduction of transmission overhead. It is a + * proprietary feature that needs to be supported by the Access Point. + * + * - Compression: data frames are compressed in real time using a Lempel Ziv + * algorithm. This is done transparently. Once this feature is enabled, + * compression and decompression takes place inside the chipset, without + * putting additional load on the host CPU. + * + * As with XR we also don't plan to support SuperAG features for now. You can + * get a mode similar to TURBO by using 40MHz bwmode. + */ + + +/** + * enum ath5k_driver_mode - PHY operation mode + * @AR5K_MODE_11A: 802.11a + * @AR5K_MODE_11B: 802.11b + * @AR5K_MODE_11G: 801.11g + * @AR5K_MODE_MAX: Used for boundary checks + * + * Do not change the order here, we use these as + * array indices and it also maps EEPROM structures. + */ +enum ath5k_driver_mode { + AR5K_MODE_11A = 0, + AR5K_MODE_11B = 1, + AR5K_MODE_11G = 2, + AR5K_MODE_MAX = 3 +}; + +/** + * enum ath5k_ant_mode - Antenna operation mode + * @AR5K_ANTMODE_DEFAULT: Default antenna setup + * @AR5K_ANTMODE_FIXED_A: Only antenna A is present + * @AR5K_ANTMODE_FIXED_B: Only antenna B is present + * @AR5K_ANTMODE_SINGLE_AP: STA locked on a single ap + * @AR5K_ANTMODE_SECTOR_AP: AP with tx antenna set on tx desc + * @AR5K_ANTMODE_SECTOR_STA: STA with tx antenna set on tx desc + * @AR5K_ANTMODE_DEBUG: Debug mode -A -> Rx, B-> Tx- + * @AR5K_ANTMODE_MAX: Used for boundary checks + * + * For more infos on antenna control check out phy.c + */ +enum ath5k_ant_mode { + AR5K_ANTMODE_DEFAULT = 0, + AR5K_ANTMODE_FIXED_A = 1, + AR5K_ANTMODE_FIXED_B = 2, + AR5K_ANTMODE_SINGLE_AP = 3, + AR5K_ANTMODE_SECTOR_AP = 4, + AR5K_ANTMODE_SECTOR_STA = 5, + AR5K_ANTMODE_DEBUG = 6, + AR5K_ANTMODE_MAX, +}; + +/** + * enum ath5k_bw_mode - Bandwidth operation mode + * @AR5K_BWMODE_DEFAULT: 20MHz, default operation + * @AR5K_BWMODE_5MHZ: Quarter rate + * @AR5K_BWMODE_10MHZ: Half rate + * @AR5K_BWMODE_40MHZ: Turbo + */ +enum ath5k_bw_mode { + AR5K_BWMODE_DEFAULT = 0, + AR5K_BWMODE_5MHZ = 1, + AR5K_BWMODE_10MHZ = 2, + AR5K_BWMODE_40MHZ = 3 +}; + + + +/****************\ + TX DEFINITIONS +\****************/ + +/** + * struct ath5k_tx_status - TX Status descriptor + * @ts_seqnum: Sequence number + * @ts_tstamp: Timestamp + * @ts_status: Status code + * @ts_final_idx: Final transmission series index + * @ts_final_retry: Final retry count + * @ts_rssi: RSSI for received ACK + * @ts_shortretry: Short retry count + * @ts_virtcol: Virtual collision count + * @ts_antenna: Antenna used + * + * TX status descriptor gets filled by the hw + * on each transmission attempt. + */ +struct ath5k_tx_status { + u16 ts_seqnum; + u16 ts_tstamp; + u8 ts_status; + u8 ts_final_idx; + u8 ts_final_retry; + s8 ts_rssi; + u8 ts_shortretry; + u8 ts_virtcol; + u8 ts_antenna; +}; + +#define AR5K_TXSTAT_ALTRATE 0x80 +#define AR5K_TXERR_XRETRY 0x01 +#define AR5K_TXERR_FILT 0x02 +#define AR5K_TXERR_FIFO 0x04 + +/** + * enum ath5k_tx_queue - Queue types used to classify tx queues. + * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue + * @AR5K_TX_QUEUE_DATA: A normal data queue + * @AR5K_TX_QUEUE_BEACON: The beacon queue + * @AR5K_TX_QUEUE_CAB: The after-beacon queue + * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue + */ +enum ath5k_tx_queue { + AR5K_TX_QUEUE_INACTIVE = 0, + AR5K_TX_QUEUE_DATA, + AR5K_TX_QUEUE_BEACON, + AR5K_TX_QUEUE_CAB, + AR5K_TX_QUEUE_UAPSD, +}; + +#define AR5K_NUM_TX_QUEUES 10 +#define AR5K_NUM_TX_QUEUES_NOQCU 2 + +/** + * enum ath5k_tx_queue_subtype - Queue sub-types to classify normal data queues + * @AR5K_WME_AC_BK: Background traffic + * @AR5K_WME_AC_BE: Best-effort (normal) traffic + * @AR5K_WME_AC_VI: Video traffic + * @AR5K_WME_AC_VO: Voice traffic + * + * These are the 4 Access Categories as defined in + * WME spec. 0 is the lowest priority and 4 is the + * highest. Normal data that hasn't been classified + * goes to the Best Effort AC. + */ +enum ath5k_tx_queue_subtype { + AR5K_WME_AC_BK = 0, + AR5K_WME_AC_BE, + AR5K_WME_AC_VI, + AR5K_WME_AC_VO, +}; + +/** + * enum ath5k_tx_queue_id - Queue ID numbers as returned by the hw functions + * @AR5K_TX_QUEUE_ID_NOQCU_DATA: Data queue on AR5210 (no QCU available) + * @AR5K_TX_QUEUE_ID_NOQCU_BEACON: Beacon queue on AR5210 (no QCU available) + * @AR5K_TX_QUEUE_ID_DATA_MIN: Data queue min index + * @AR5K_TX_QUEUE_ID_DATA_MAX: Data queue max index + * @AR5K_TX_QUEUE_ID_CAB: Content after beacon queue + * @AR5K_TX_QUEUE_ID_BEACON: Beacon queue + * @AR5K_TX_QUEUE_ID_UAPSD: Urgent Automatic Power Save Delivery, + * + * Each number represents a hw queue. If hw does not support hw queues + * (eg 5210) all data goes in one queue. + */ +enum ath5k_tx_queue_id { + AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, + AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, + AR5K_TX_QUEUE_ID_DATA_MIN = 0, + AR5K_TX_QUEUE_ID_DATA_MAX = 3, + AR5K_TX_QUEUE_ID_UAPSD = 7, + AR5K_TX_QUEUE_ID_CAB = 8, + AR5K_TX_QUEUE_ID_BEACON = 9, +}; + +/* + * Flags to set hw queue's parameters... + */ +#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ +#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ +#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ +#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ +#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ +#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */ +#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */ +#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */ +#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */ +#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */ +#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/ +#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */ +#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ +#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ + +/** + * struct ath5k_txq - Transmit queue state + * @qnum: Hardware q number + * @link: Link ptr in last TX desc + * @q: Transmit queue (&struct list_head) + * @lock: Lock on q and link + * @setup: Is the queue configured + * @txq_len:Number of queued buffers + * @txq_max: Max allowed num of queued buffers + * @txq_poll_mark: Used to check if queue got stuck + * @txq_stuck: Queue stuck counter + * + * One of these exists for each hardware transmit queue. + * Packets sent to us from above are assigned to queues based + * on their priority. Not all devices support a complete set + * of hardware transmit queues. For those devices the array + * sc_ac2q will map multiple priorities to fewer hardware queues + * (typically all to one hardware queue). + */ +struct ath5k_txq { + unsigned int qnum; + u32 *link; + struct list_head q; + spinlock_t lock; + bool setup; + int txq_len; + int txq_max; + bool txq_poll_mark; + unsigned int txq_stuck; +}; + +/** + * struct ath5k_txq_info - A struct to hold TX queue's parameters + * @tqi_type: One of enum ath5k_tx_queue + * @tqi_subtype: One of enum ath5k_tx_queue_subtype + * @tqi_flags: TX queue flags (see above) + * @tqi_aifs: Arbitrated Inter-frame Space + * @tqi_cw_min: Minimum Contention Window + * @tqi_cw_max: Maximum Contention Window + * @tqi_cbr_period: Constant bit rate period + * @tqi_ready_time: Time queue waits after an event when RDYTIME is enabled + */ +struct ath5k_txq_info { + enum ath5k_tx_queue tqi_type; + enum ath5k_tx_queue_subtype tqi_subtype; + u16 tqi_flags; + u8 tqi_aifs; + u16 tqi_cw_min; + u16 tqi_cw_max; + u32 tqi_cbr_period; + u32 tqi_cbr_overflow_limit; + u32 tqi_burst_time; + u32 tqi_ready_time; +}; + +/** + * enum ath5k_pkt_type - Transmit packet types + * @AR5K_PKT_TYPE_NORMAL: Normal data + * @AR5K_PKT_TYPE_ATIM: ATIM + * @AR5K_PKT_TYPE_PSPOLL: PS-Poll + * @AR5K_PKT_TYPE_BEACON: Beacon + * @AR5K_PKT_TYPE_PROBE_RESP: Probe response + * @AR5K_PKT_TYPE_PIFS: PIFS + * Used on tx control descriptor + */ +enum ath5k_pkt_type { + AR5K_PKT_TYPE_NORMAL = 0, + AR5K_PKT_TYPE_ATIM = 1, + AR5K_PKT_TYPE_PSPOLL = 2, + AR5K_PKT_TYPE_BEACON = 3, + AR5K_PKT_TYPE_PROBE_RESP = 4, + AR5K_PKT_TYPE_PIFS = 5, +}; + +/* + * TX power and TPC settings + */ +#define AR5K_TXPOWER_OFDM(_r, _v) ( \ + ((0 & 1) << ((_v) + 6)) | \ + (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \ +) + +#define AR5K_TXPOWER_CCK(_r, _v) ( \ + (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ +) + + + +/****************\ + RX DEFINITIONS +\****************/ + +/** + * struct ath5k_rx_status - RX Status descriptor + * @rs_datalen: Data length + * @rs_tstamp: Timestamp + * @rs_status: Status code + * @rs_phyerr: PHY error mask + * @rs_rssi: RSSI in 0.5dbm units + * @rs_keyix: Index to the key used for decrypting + * @rs_rate: Rate used to decode the frame + * @rs_antenna: Antenna used to receive the frame + * @rs_more: Indicates this is a frame fragment (Fast frames) + */ +struct ath5k_rx_status { + u16 rs_datalen; + u16 rs_tstamp; + u8 rs_status; + u8 rs_phyerr; + s8 rs_rssi; + u8 rs_keyix; + u8 rs_rate; + u8 rs_antenna; + u8 rs_more; +}; + +#define AR5K_RXERR_CRC 0x01 +#define AR5K_RXERR_PHY 0x02 +#define AR5K_RXERR_FIFO 0x04 +#define AR5K_RXERR_DECRYPT 0x08 +#define AR5K_RXERR_MIC 0x10 +#define AR5K_RXKEYIX_INVALID ((u8) -1) +#define AR5K_TXKEYIX_INVALID ((u32) -1) + + +/**************************\ + BEACON TIMERS DEFINITIONS +\**************************/ + +#define AR5K_BEACON_PERIOD 0x0000ffff +#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ +#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ + + +/* + * TSF to TU conversion: + * + * TSF is a 64bit value in usec (microseconds). + * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of + * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). + */ +#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) + + + +/*******************************\ + GAIN OPTIMIZATION DEFINITIONS +\*******************************/ + +/** + * enum ath5k_rfgain - RF Gain optimization engine state + * @AR5K_RFGAIN_INACTIVE: Engine disabled + * @AR5K_RFGAIN_ACTIVE: Probe active + * @AR5K_RFGAIN_READ_REQUESTED: Probe requested + * @AR5K_RFGAIN_NEED_CHANGE: Gain_F needs change + */ +enum ath5k_rfgain { + AR5K_RFGAIN_INACTIVE = 0, + AR5K_RFGAIN_ACTIVE, + AR5K_RFGAIN_READ_REQUESTED, + AR5K_RFGAIN_NEED_CHANGE, +}; + +/** + * struct ath5k_gain - RF Gain optimization engine state data + * @g_step_idx: Current step index + * @g_current: Current gain + * @g_target: Target gain + * @g_low: Low gain boundary + * @g_high: High gain boundary + * @g_f_corr: Gain_F correction + * @g_state: One of enum ath5k_rfgain + */ +struct ath5k_gain { + u8 g_step_idx; + u8 g_current; + u8 g_target; + u8 g_low; + u8 g_high; + u8 g_f_corr; + u8 g_state; +}; + + + +/********************\ + COMMON DEFINITIONS +\********************/ + +#define AR5K_SLOT_TIME_9 396 +#define AR5K_SLOT_TIME_20 880 +#define AR5K_SLOT_TIME_MAX 0xffff + +/** + * struct ath5k_athchan_2ghz - 2GHz to 5GHZ map for RF5111 + * @a2_flags: Channel flags (internal) + * @a2_athchan: HW channel number (internal) + * + * This structure is used to map 2GHz channels to + * 5GHz Atheros channels on 2111 frequency converter + * that comes together with RF5111 + * TODO: Clean up + */ +struct ath5k_athchan_2ghz { + u32 a2_flags; + u16 a2_athchan; +}; + +/** + * enum ath5k_dmasize - DMA size definitions (2^(n+2)) + * @AR5K_DMASIZE_4B: 4Bytes + * @AR5K_DMASIZE_8B: 8Bytes + * @AR5K_DMASIZE_16B: 16Bytes + * @AR5K_DMASIZE_32B: 32Bytes + * @AR5K_DMASIZE_64B: 64Bytes (Default) + * @AR5K_DMASIZE_128B: 128Bytes + * @AR5K_DMASIZE_256B: 256Bytes + * @AR5K_DMASIZE_512B: 512Bytes + * + * These are used to set DMA burst size on hw + * + * Note: Some platforms can't handle more than 4Bytes + * be careful on embedded boards. + */ +enum ath5k_dmasize { + AR5K_DMASIZE_4B = 0, + AR5K_DMASIZE_8B, + AR5K_DMASIZE_16B, + AR5K_DMASIZE_32B, + AR5K_DMASIZE_64B, + AR5K_DMASIZE_128B, + AR5K_DMASIZE_256B, + AR5K_DMASIZE_512B +}; + + + +/******************\ + RATE DEFINITIONS +\******************/ + +/** + * DOC: Rate codes + * + * Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32. + * + * The rate code is used to get the RX rate or set the TX rate on the + * hardware descriptors. It is also used for internal modulation control + * and settings. + * + * This is the hardware rate map we are aware of (html unfriendly): + * + * Rate code Rate (Kbps) + * --------- ----------- + * 0x01 3000 (XR) + * 0x02 1000 (XR) + * 0x03 250 (XR) + * 0x04 - 05 -Reserved- + * 0x06 2000 (XR) + * 0x07 500 (XR) + * 0x08 48000 (OFDM) + * 0x09 24000 (OFDM) + * 0x0A 12000 (OFDM) + * 0x0B 6000 (OFDM) + * 0x0C 54000 (OFDM) + * 0x0D 36000 (OFDM) + * 0x0E 18000 (OFDM) + * 0x0F 9000 (OFDM) + * 0x10 - 17 -Reserved- + * 0x18 11000L (CCK) + * 0x19 5500L (CCK) + * 0x1A 2000L (CCK) + * 0x1B 1000L (CCK) + * 0x1C 11000S (CCK) + * 0x1D 5500S (CCK) + * 0x1E 2000S (CCK) + * 0x1F -Reserved- + * + * "S" indicates CCK rates with short preamble and "L" with long preamble. + * + * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the + * lowest 4 bits, so they are the same as above with a 0xF mask. + * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). + * We handle this in ath5k_setup_bands(). + */ +#define AR5K_MAX_RATES 32 + +/* B */ +#define ATH5K_RATE_CODE_1M 0x1B +#define ATH5K_RATE_CODE_2M 0x1A +#define ATH5K_RATE_CODE_5_5M 0x19 +#define ATH5K_RATE_CODE_11M 0x18 +/* A and G */ +#define ATH5K_RATE_CODE_6M 0x0B +#define ATH5K_RATE_CODE_9M 0x0F +#define ATH5K_RATE_CODE_12M 0x0A +#define ATH5K_RATE_CODE_18M 0x0E +#define ATH5K_RATE_CODE_24M 0x09 +#define ATH5K_RATE_CODE_36M 0x0D +#define ATH5K_RATE_CODE_48M 0x08 +#define ATH5K_RATE_CODE_54M 0x0C + +/* Adding this flag to rate_code on B rates + * enables short preamble */ +#define AR5K_SET_SHORT_PREAMBLE 0x04 + +/* + * Crypto definitions + */ + +#define AR5K_KEYCACHE_SIZE 8 +extern bool ath5k_modparam_nohwcrypt; + +/***********************\ + HW RELATED DEFINITIONS +\***********************/ + +/* + * Misc definitions + */ +#define AR5K_RSSI_EP_MULTIPLIER (1 << 7) + +#define AR5K_ASSERT_ENTRY(_e, _s) do { \ + if (_e >= _s) \ + return false; \ +} while (0) + +/* + * Hardware interrupt abstraction + */ + +/** + * enum ath5k_int - Hardware interrupt masks helpers + * @AR5K_INT_RXOK: Frame successfully received + * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor + * @AR5K_INT_RXERR: Frame reception failed + * @AR5K_INT_RXNOFRM: No frame received within a specified time period + * @AR5K_INT_RXEOL: Reached "End Of List", means we need more RX descriptors + * @AR5K_INT_RXORN: Indicates we got RX FIFO overrun. Note that Rx overrun is + * not always fatal, on some chips we can continue operation + * without resetting the card, that's why %AR5K_INT_FATAL is not + * common for all chips. + * @AR5K_INT_RX_ALL: Mask to identify all RX related interrupts + * + * @AR5K_INT_TXOK: Frame transmission success + * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor + * @AR5K_INT_TXERR: Frame transmission failure + * @AR5K_INT_TXEOL: Received End Of List for VEOL (Virtual End Of List). The + * Queue Control Unit (QCU) signals an EOL interrupt only if a + * descriptor's LinkPtr is NULL. For more details, refer to: + * "http://www.freepatentsonline.com/20030225739.html" + * @AR5K_INT_TXNOFRM: No frame was transmitted within a specified time period + * @AR5K_INT_TXURN: Indicates we got TX FIFO underrun. In such case we should + * increase the TX trigger threshold. + * @AR5K_INT_TX_ALL: Mask to identify all TX related interrupts + * + * @AR5K_INT_MIB: Indicates the either Management Information Base counters or + * one of the PHY error counters reached the maximum value and + * should be read and cleared. + * @AR5K_INT_SWI: Software triggered interrupt. + * @AR5K_INT_RXPHY: RX PHY Error + * @AR5K_INT_RXKCM: RX Key cache miss + * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a + * beacon that must be handled in software. The alternative is if + * you have VEOL support, in that case you let the hardware deal + * with things. + * @AR5K_INT_BRSSI: Beacon received with an RSSI value below our threshold + * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing + * beacons from the AP have associated with, we should probably + * try to reassociate. When in IBSS mode this might mean we have + * not received any beacons from any local stations. Note that + * every station in an IBSS schedules to send beacons at the + * Target Beacon Transmission Time (TBTT) with a random backoff. + * @AR5K_INT_BNR: Beacon queue got triggered (DMA beacon alert) while empty. + * @AR5K_INT_TIM: Beacon with local station's TIM bit set + * @AR5K_INT_DTIM: Beacon with DTIM bit and zero DTIM count received + * @AR5K_INT_DTIM_SYNC: DTIM sync lost + * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill switches connected to + * our GPIO pins. + * @AR5K_INT_BCN_TIMEOUT: Beacon timeout, we waited after TBTT but got noting + * @AR5K_INT_CAB_TIMEOUT: We waited for CAB traffic after the beacon but got + * nothing or an incomplete CAB frame sequence. + * @AR5K_INT_QCBRORN: A queue got it's CBR counter expired + * @AR5K_INT_QCBRURN: A queue got triggered wile empty + * @AR5K_INT_QTRIG: A queue got triggered + * + * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by bus/DMA + * errors. Indicates we need to reset the card. + * @AR5K_INT_GLOBAL: Used to clear and set the IER + * @AR5K_INT_NOCARD: Signals the card has been removed + * @AR5K_INT_COMMON: Common interrupts shared among MACs with the same + * bit value + * + * These are mapped to take advantage of some common bits + * between the MACs, to be able to set intr properties + * easier. Some of them are not used yet inside hw.c. Most map + * to the respective hw interrupt value as they are common among different + * MACs. + */ +enum ath5k_int { + AR5K_INT_RXOK = 0x00000001, + AR5K_INT_RXDESC = 0x00000002, + AR5K_INT_RXERR = 0x00000004, + AR5K_INT_RXNOFRM = 0x00000008, + AR5K_INT_RXEOL = 0x00000010, + AR5K_INT_RXORN = 0x00000020, + AR5K_INT_TXOK = 0x00000040, + AR5K_INT_TXDESC = 0x00000080, + AR5K_INT_TXERR = 0x00000100, + AR5K_INT_TXNOFRM = 0x00000200, + AR5K_INT_TXEOL = 0x00000400, + AR5K_INT_TXURN = 0x00000800, + AR5K_INT_MIB = 0x00001000, + AR5K_INT_SWI = 0x00002000, + AR5K_INT_RXPHY = 0x00004000, + AR5K_INT_RXKCM = 0x00008000, + AR5K_INT_SWBA = 0x00010000, + AR5K_INT_BRSSI = 0x00020000, + AR5K_INT_BMISS = 0x00040000, + AR5K_INT_FATAL = 0x00080000, /* Non common */ + AR5K_INT_BNR = 0x00100000, /* Non common */ + AR5K_INT_TIM = 0x00200000, /* Non common */ + AR5K_INT_DTIM = 0x00400000, /* Non common */ + AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */ + AR5K_INT_GPIO = 0x01000000, + AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ + AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ + AR5K_INT_QCBRORN = 0x08000000, /* Non common */ + AR5K_INT_QCBRURN = 0x10000000, /* Non common */ + AR5K_INT_QTRIG = 0x20000000, /* Non common */ + AR5K_INT_GLOBAL = 0x80000000, + + AR5K_INT_TX_ALL = AR5K_INT_TXOK + | AR5K_INT_TXDESC + | AR5K_INT_TXERR + | AR5K_INT_TXNOFRM + | AR5K_INT_TXEOL + | AR5K_INT_TXURN, + + AR5K_INT_RX_ALL = AR5K_INT_RXOK + | AR5K_INT_RXDESC + | AR5K_INT_RXERR + | AR5K_INT_RXNOFRM + | AR5K_INT_RXEOL + | AR5K_INT_RXORN, + + AR5K_INT_COMMON = AR5K_INT_RXOK + | AR5K_INT_RXDESC + | AR5K_INT_RXERR + | AR5K_INT_RXNOFRM + | AR5K_INT_RXEOL + | AR5K_INT_RXORN + | AR5K_INT_TXOK + | AR5K_INT_TXDESC + | AR5K_INT_TXERR + | AR5K_INT_TXNOFRM + | AR5K_INT_TXEOL + | AR5K_INT_TXURN + | AR5K_INT_MIB + | AR5K_INT_SWI + | AR5K_INT_RXPHY + | AR5K_INT_RXKCM + | AR5K_INT_SWBA + | AR5K_INT_BRSSI + | AR5K_INT_BMISS + | AR5K_INT_GPIO + | AR5K_INT_GLOBAL, + + AR5K_INT_NOCARD = 0xffffffff +}; + +/** + * enum ath5k_calibration_mask - Mask which calibration is active at the moment + * @AR5K_CALIBRATION_FULL: Full calibration (AGC + SHORT) + * @AR5K_CALIBRATION_SHORT: Short calibration (NF + I/Q) + * @AR5K_CALIBRATION_NF: Noise Floor calibration + * @AR5K_CALIBRATION_ANI: Adaptive Noise Immunity + */ +enum ath5k_calibration_mask { + AR5K_CALIBRATION_FULL = 0x01, + AR5K_CALIBRATION_SHORT = 0x02, + AR5K_CALIBRATION_NF = 0x04, + AR5K_CALIBRATION_ANI = 0x08, +}; + +/** + * enum ath5k_power_mode - Power management modes + * @AR5K_PM_UNDEFINED: Undefined + * @AR5K_PM_AUTO: Allow card to sleep if possible + * @AR5K_PM_AWAKE: Force card to wake up + * @AR5K_PM_FULL_SLEEP: Force card to full sleep (DANGEROUS) + * @AR5K_PM_NETWORK_SLEEP: Allow to sleep for a specified duration + * + * Currently only PM_AWAKE is used, FULL_SLEEP and NETWORK_SLEEP/AUTO + * are also known to have problems on some cards. This is not a big + * problem though because we can have almost the same effect as + * FULL_SLEEP by putting card on warm reset (it's almost powered down). + */ +enum ath5k_power_mode { + AR5K_PM_UNDEFINED = 0, + AR5K_PM_AUTO, + AR5K_PM_AWAKE, + AR5K_PM_FULL_SLEEP, + AR5K_PM_NETWORK_SLEEP, +}; + +/* + * These match net80211 definitions (not used in + * mac80211). + * TODO: Clean this up + */ +#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ +#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ +#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ +#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ +#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ + +/* GPIO-controlled software LED */ +#define AR5K_SOFTLED_PIN 0 +#define AR5K_SOFTLED_ON 0 +#define AR5K_SOFTLED_OFF 1 + + +/* XXX: we *may* move cap_range stuff to struct wiphy */ +struct ath5k_capabilities { + /* + * Supported PHY modes + * (ie. AR5K_MODE_11A, AR5K_MODE_11B, ...) + */ + DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); + + /* + * Frequency range (without regulation restrictions) + */ + struct { + u16 range_2ghz_min; + u16 range_2ghz_max; + u16 range_5ghz_min; + u16 range_5ghz_max; + } cap_range; + + /* + * Values stored in the EEPROM (some of them...) + */ + struct ath5k_eeprom_info cap_eeprom; + + /* + * Queue information + */ + struct { + u8 q_tx_num; + } cap_queues; + + bool cap_has_phyerr_counters; + bool cap_has_mrr_support; + bool cap_needs_2GHz_ovr; +}; + +/* size of noise floor history (keep it a power of two) */ +#define ATH5K_NF_CAL_HIST_MAX 8 +struct ath5k_nfcal_hist { + s16 index; /* current index into nfval */ + s16 nfval[ATH5K_NF_CAL_HIST_MAX]; /* last few noise floors */ +}; + +#define ATH5K_LED_MAX_NAME_LEN 31 + +/* + * State for LED triggers + */ +struct ath5k_led { + char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ + struct ath5k_hw *ah; /* driver state */ + struct led_classdev led_dev; /* led classdev */ +}; + +/* Rfkill */ +struct ath5k_rfkill { + /* GPIO PIN for rfkill */ + u16 gpio; + /* polarity of rfkill GPIO PIN */ + bool polarity; + /* RFKILL toggle tasklet */ + struct tasklet_struct toggleq; +}; + +/* statistics */ +struct ath5k_statistics { + /* antenna use */ + unsigned int antenna_rx[5]; /* frames count per antenna RX */ + unsigned int antenna_tx[5]; /* frames count per antenna TX */ + + /* frame errors */ + unsigned int rx_all_count; /* all RX frames, including errors */ + unsigned int tx_all_count; /* all TX frames, including errors */ + unsigned int rx_bytes_count; /* all RX bytes, including errored pkts + * and the MAC headers for each packet + */ + unsigned int tx_bytes_count; /* all TX bytes, including errored pkts + * and the MAC headers and padding for + * each packet. + */ + unsigned int rxerr_crc; + unsigned int rxerr_phy; + unsigned int rxerr_phy_code[32]; + unsigned int rxerr_fifo; + unsigned int rxerr_decrypt; + unsigned int rxerr_mic; + unsigned int rxerr_proc; + unsigned int rxerr_jumbo; + unsigned int txerr_retry; + unsigned int txerr_fifo; + unsigned int txerr_filt; + + /* MIB counters */ + unsigned int ack_fail; + unsigned int rts_fail; + unsigned int rts_ok; + unsigned int fcs_error; + unsigned int beacons; + + unsigned int mib_intr; + unsigned int rxorn_intr; + unsigned int rxeol_intr; +}; + +/* + * Misc defines + */ + +#define AR5K_MAX_GPIO 10 +#define AR5K_MAX_RF_BANKS 8 + +#if CHAN_DEBUG +#define ATH_CHAN_MAX (26 + 26 + 26 + 200 + 200) +#else +#define ATH_CHAN_MAX (14 + 14 + 14 + 252 + 20) +#endif + +#define ATH_RXBUF 40 /* number of RX buffers */ +#define ATH_TXBUF 200 /* number of TX buffers */ +#define ATH_BCBUF 4 /* number of beacon buffers */ +#define ATH5K_TXQ_LEN_MAX (ATH_TXBUF / 4) /* bufs per queue */ +#define ATH5K_TXQ_LEN_LOW (ATH5K_TXQ_LEN_MAX / 2) /* low mark */ + +DECLARE_EWMA(beacon_rssi, 10, 8) + +/* Driver state associated with an instance of a device */ +struct ath5k_hw { + struct ath_common common; + + struct pci_dev *pdev; + struct device *dev; /* for dma mapping */ + int irq; + u16 devid; + void __iomem *iobase; /* address of the device */ + struct mutex lock; /* dev-level lock */ + struct ieee80211_hw *hw; /* IEEE 802.11 common */ + struct ieee80211_supported_band sbands[NUM_NL80211_BANDS]; + struct ieee80211_channel channels[ATH_CHAN_MAX]; + struct ieee80211_rate rates[NUM_NL80211_BANDS][AR5K_MAX_RATES]; + s8 rate_idx[NUM_NL80211_BANDS][AR5K_MAX_RATES]; + enum nl80211_iftype opmode; + +#ifdef CPTCFG_ATH5K_DEBUG + struct ath5k_dbg_info debug; /* debug info */ +#endif /* CPTCFG_ATH5K_DEBUG */ + + struct ath5k_buf *bufptr; /* allocated buffer ptr */ + struct ath5k_desc *desc; /* TX/RX descriptors */ + dma_addr_t desc_daddr; /* DMA (physical) address */ + size_t desc_len; /* size of TX/RX descriptors */ + + DECLARE_BITMAP(status, 4); +#define ATH_STAT_INVALID 0 /* disable hardware accesses */ +#define ATH_STAT_LEDSOFT 2 /* enable LED gpio status */ +#define ATH_STAT_STARTED 3 /* opened & irqs enabled */ +#define ATH_STAT_RESET 4 /* hw reset */ + + unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ + unsigned int fif_filter_flags; /* Current FIF_* filter flags */ + struct ieee80211_channel *curchan; /* current h/w channel */ + + u16 nvifs; + + enum ath5k_int imask; /* interrupt mask copy */ + + spinlock_t irqlock; + bool rx_pending; /* rx tasklet pending */ + bool tx_pending; /* tx tasklet pending */ + + u8 bssidmask[ETH_ALEN]; + + unsigned int led_pin, /* GPIO pin for driving LED */ + led_on; /* pin setting for LED on */ + + struct work_struct reset_work; /* deferred chip reset */ + struct work_struct calib_work; /* deferred phy calibration */ + + struct list_head rxbuf; /* receive buffer */ + spinlock_t rxbuflock; + u32 *rxlink; /* link ptr in last RX desc */ + struct tasklet_struct rxtq; /* rx intr tasklet */ + struct ath5k_led rx_led; /* rx led */ + + struct list_head txbuf; /* transmit buffer */ + spinlock_t txbuflock; + unsigned int txbuf_len; /* buf count in txbuf list */ + struct ath5k_txq txqs[AR5K_NUM_TX_QUEUES]; /* tx queues */ + struct tasklet_struct txtq; /* tx intr tasklet */ + struct ath5k_led tx_led; /* tx led */ + + struct ath5k_rfkill rf_kill; + + spinlock_t block; /* protects beacon */ + struct tasklet_struct beacontq; /* beacon intr tasklet */ + struct list_head bcbuf; /* beacon buffer */ + struct ieee80211_vif *bslot[ATH_BCBUF]; + u16 num_ap_vifs; + u16 num_adhoc_vifs; + u16 num_mesh_vifs; + unsigned int bhalq, /* SW q for outgoing beacons */ + bmisscount, /* missed beacon transmits */ + bintval, /* beacon interval in TU */ + bsent; + unsigned int nexttbtt; /* next beacon time in TU */ + struct ath5k_txq *cabq; /* content after beacon */ + + bool assoc; /* associate state */ + bool enable_beacon; /* true if beacons are on */ + + struct ath5k_statistics stats; + + struct ath5k_ani_state ani_state; + struct tasklet_struct ani_tasklet; /* ANI calibration */ + + struct delayed_work tx_complete_work; + + struct survey_info survey; /* collected survey info */ + + enum ath5k_int ah_imr; + + struct ieee80211_channel *ah_current_channel; + bool ah_iq_cal_needed; + bool ah_single_chip; + + enum ath5k_version ah_version; + enum ath5k_radio ah_radio; + u32 ah_mac_srev; + u16 ah_mac_version; + u16 ah_phy_revision; + u16 ah_radio_5ghz_revision; + u16 ah_radio_2ghz_revision; + +#define ah_modes ah_capabilities.cap_mode +#define ah_ee_version ah_capabilities.cap_eeprom.ee_version + + u8 ah_retry_long; + u8 ah_retry_short; + + bool ah_use_32khz_clock; + + u8 ah_coverage_class; + bool ah_ack_bitrate_high; + u8 ah_bwmode; + bool ah_short_slot; + + /* Antenna Control */ + u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; + u8 ah_ant_mode; + u8 ah_tx_ant; + u8 ah_def_ant; + + struct ath5k_capabilities ah_capabilities; + + struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; + u32 ah_txq_status; + u32 ah_txq_imr_txok; + u32 ah_txq_imr_txerr; + u32 ah_txq_imr_txurn; + u32 ah_txq_imr_txdesc; + u32 ah_txq_imr_txeol; + u32 ah_txq_imr_cbrorn; + u32 ah_txq_imr_cbrurn; + u32 ah_txq_imr_qtrig; + u32 ah_txq_imr_nofrm; + + u32 ah_txq_isr_txok_all; + u32 ah_txq_isr_txurn; + u32 ah_txq_isr_qcborn; + u32 ah_txq_isr_qcburn; + u32 ah_txq_isr_qtrig; + + u32 *ah_rf_banks; + size_t ah_rf_banks_size; + size_t ah_rf_regs_count; + struct ath5k_gain ah_gain; + u8 ah_offset[AR5K_MAX_RF_BANKS]; + + + struct { + /* Temporary tables used for interpolation */ + u8 tmpL[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_POWER_TABLE_SIZE]; + u8 tmpR[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_POWER_TABLE_SIZE]; + u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2]; + u16 txp_rates_power_table[AR5K_MAX_RATES]; + u8 txp_min_idx; + bool txp_tpc; + /* Values in 0.25dB units */ + s16 txp_min_pwr; + s16 txp_max_pwr; + s16 txp_cur_pwr; + /* Values in 0.5dB units */ + s16 txp_offset; + s16 txp_ofdm; + s16 txp_cck_ofdm_gainf_delta; + /* Value in dB units */ + s16 txp_cck_ofdm_pwr_delta; + bool txp_setup; + int txp_requested; /* Requested tx power in dBm */ + } ah_txpower; + + struct ath5k_nfcal_hist ah_nfcal_hist; + + /* average beacon RSSI in our BSS (used by ANI) */ + struct ewma_beacon_rssi ah_beacon_rssi_avg; + + /* noise floor from last periodic calibration */ + s32 ah_noise_floor; + + /* Calibration timestamp */ + unsigned long ah_cal_next_full; + unsigned long ah_cal_next_short; + unsigned long ah_cal_next_ani; + + /* Calibration mask */ + u8 ah_cal_mask; + + /* + * Function pointers + */ + int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, + unsigned int, unsigned int, int, enum ath5k_pkt_type, + unsigned int, unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int, unsigned int, unsigned int); + int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, + struct ath5k_tx_status *); + int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, + struct ath5k_rx_status *); +}; + +struct ath_bus_ops { + enum ath_bus_type ath_bus_type; + void (*read_cachesize)(struct ath_common *common, int *csz); + bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data); + int (*eeprom_read_mac)(struct ath5k_hw *ah, u8 *mac); +}; + +/* + * Prototypes + */ +extern const struct ieee80211_ops ath5k_hw_ops; + +/* Initialization and detach functions */ +int ath5k_hw_init(struct ath5k_hw *ah); +void ath5k_hw_deinit(struct ath5k_hw *ah); + +int ath5k_sysfs_register(struct ath5k_hw *ah); +void ath5k_sysfs_unregister(struct ath5k_hw *ah); + +/*Chip id helper functions */ +int ath5k_hw_read_srev(struct ath5k_hw *ah); + +/* LED functions */ +int ath5k_init_leds(struct ath5k_hw *ah); +void ath5k_led_enable(struct ath5k_hw *ah); +void ath5k_led_off(struct ath5k_hw *ah); +void ath5k_unregister_leds(struct ath5k_hw *ah); + + +/* Reset Functions */ +int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel); +int ath5k_hw_on_hold(struct ath5k_hw *ah); +int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, + struct ieee80211_channel *channel, bool fast, bool skip_pcu); +int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, + bool is_set); +/* Power management functions */ + + +/* Clock rate related functions */ +unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); +unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); +void ath5k_hw_set_clockrate(struct ath5k_hw *ah); + + +/* DMA Related Functions */ +void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); +u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); +int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); +int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); +int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue); +u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); +int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, + u32 phys_addr); +int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); +/* Interrupt handling */ +bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); +int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); +enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask); +void ath5k_hw_update_mib_counters(struct ath5k_hw *ah); +/* Init/Stop functions */ +void ath5k_hw_dma_init(struct ath5k_hw *ah); +int ath5k_hw_dma_stop(struct ath5k_hw *ah); + +/* EEPROM access functions */ +int ath5k_eeprom_init(struct ath5k_hw *ah); +void ath5k_eeprom_detach(struct ath5k_hw *ah); +int ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel); + +/* Protocol Control Unit Functions */ +/* Helpers */ +int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum nl80211_band band, + int len, struct ieee80211_rate *rate, bool shortpre); +unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah); +unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah); +int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); +void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class); +/* RX filter control*/ +int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); +void ath5k_hw_set_bssid(struct ath5k_hw *ah); +void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); +void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); +u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); +void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); +/* Receive (DRU) start/stop functions */ +void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); +void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); +/* Beacon control functions */ +u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); +void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); +void ath5k_hw_reset_tsf(struct ath5k_hw *ah); +void ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, + u32 interval); +bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval); +/* Init function */ +void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode); + +/* Queue Control Unit, DFS Control Unit Functions */ +int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, + struct ath5k_txq_info *queue_info); +int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, + const struct ath5k_txq_info *queue_info); +int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, + enum ath5k_tx_queue queue_type, + struct ath5k_txq_info *queue_info); +void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah, + unsigned int queue); +u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); +void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); +int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); +int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time); +/* Init function */ +int ath5k_hw_init_queues(struct ath5k_hw *ah); + +/* Hardware Descriptor Functions */ +int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); +int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + u32 size, unsigned int flags); +int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, + u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3); + + +/* GPIO Functions */ +void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); +int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); +int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); +u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); +int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); +void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, + u32 interrupt_level); + + +/* RFkill Functions */ +void ath5k_rfkill_hw_start(struct ath5k_hw *ah); +void ath5k_rfkill_hw_stop(struct ath5k_hw *ah); + + +/* Misc functions TODO: Cleanup */ +int ath5k_hw_set_capabilities(struct ath5k_hw *ah); +int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); +int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); + + +/* Initial register settings functions */ +int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); + + +/* PHY functions */ +/* Misc PHY functions */ +u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum nl80211_band band); +int ath5k_hw_phy_disable(struct ath5k_hw *ah); +/* Gain_F optimization */ +enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); +int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); +/* PHY/RF channel functions */ +bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel); +/* PHY calibration */ +void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah); +int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, + struct ieee80211_channel *channel); +void ath5k_hw_update_noise_floor(struct ath5k_hw *ah); +/* Spur mitigation */ +bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, + struct ieee80211_channel *channel); +/* Antenna control */ +void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode); +void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode); +/* TX power setup */ +int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); +/* Init function */ +int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, + u8 mode, bool fast); + +/* + * Functions used internally + */ + +static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah) +{ + return &ah->common; +} + +static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah) +{ + return &(ath5k_hw_common(ah)->regulatory); +} + +#ifdef CPTCFG_ATH5K_AHB +#define AR5K_AR2315_PCI_BASE ((void __iomem *)0xb0100000) + +static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg) +{ + /* On AR2315 and AR2317 the PCI clock domain registers + * are outside of the WMAC register space */ + if (unlikely((reg >= 0x4000) && (reg < 0x5000) && + (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6))) + return AR5K_AR2315_PCI_BASE + reg; + + return ah->iobase + reg; +} + +static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) +{ + return ioread32(ath5k_ahb_reg(ah, reg)); +} + +static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) +{ + iowrite32(val, ath5k_ahb_reg(ah, reg)); +} + +#else + +static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) +{ + return ioread32(ah->iobase + reg); +} + +static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) +{ + iowrite32(val, ah->iobase + reg); +} + +#endif + +static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah) +{ + return ath5k_hw_common(ah)->bus_ops->ath_bus_type; +} + +static inline void ath5k_read_cachesize(struct ath_common *common, int *csz) +{ + common->bus_ops->read_cachesize(common, csz); +} + +static inline bool ath5k_hw_nvram_read(struct ath5k_hw *ah, u32 off, u16 *data) +{ + struct ath_common *common = ath5k_hw_common(ah); + return common->bus_ops->eeprom_read(common, off, data); +} + +static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) +{ + u32 retval = 0, bit, i; + + for (i = 0; i < bits; i++) { + bit = (val >> i) & 1; + retval = (retval << 1) | bit; + } + + return retval; +} + +#endif -- cgit v1.2.3