Age | Commit message (Collapse) | Author |
|
Add NAU8822 BTL overlay.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
|
Add Verdin DSI to HDMI adapter overlay.
Related-to: ELB-5026
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
|
Add overlay for 10 inch capacitive touch panel connected via DSI to LVDS
adapter.
Related-to: ELB-5026
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Use media-ctl to set the format of the source node and gst-launch-1.0 to start
and consume the video stream.
media-ctl --set-v4l2 '"ov5640 4-003c":0 [fmt:UYVY8_1X16/640x480@1/30]'
gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=30 ! \
video/x-raw,width=640,height=480, format=YUY2 ! waylandsink sync=false
[B
media-ctl --set-v4l2 '"ov5640 4-003c":0 [fmt:UYVY8_1X16/720x480@1/30]'
gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=30 ! \
video/x-raw,width=720,height=480, format=YUY2 ! waylandsink sync=false
media-ctl --set-v4l2 '"ov5640 4-003c":0 [fmt:UYVY8_1X16/1280x720@1/30]'
gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=30 ! \
video/x-raw,width=1280,height=720, format=YUY2 ! waylandsink sync=false
media-ctl --set-v4l2 '"ov5640 4-003c":0 [fmt:UYVY8_1X16/1920x1080@1/15]'
gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=30 ! \
video/x-raw,width=1920,height=1080, format=YUY2 ! waylandsink sync=false
media-ctl --set-v4l2 '"ov5640 4-003c":0 [fmt:UYVY8_1X16/2592x1944@1/15]'
gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=30 ! \
video/x-raw,width=2592,height=1944, format=YUY2 ! waylandsink sync=false
root@verdin-am62-14917625:~# media-ctl --set-v4l2 '"ov5640 4-003c":0 [fmt:UYVY8_1X16/640x480@1/30]'
root@verdin-am62-14917625:~# gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=30 ! \
video/x-raw,width=640,height=480, format=YUY2 ! waylandsink sync=false -v
Setting pipeline to PAUSED ...
Pipeline is live and does not need PREROLL ...
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
/GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps = video/x-raw, width=(int)640, height=(int)480, format=(string)YUY2, framerate=(fraction)120/1, interlace-mode=(string)progressive, colorimetry=(string)2:4:16:1
/GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:src: caps = video/x-raw, width=(int)640, height=(int)480, format=(string)YUY2, framerate=(fraction)120/1, interlace-mode=(string)progressive, colorimetry=(string)2:4:16:1
/GstPipeline:pipeline0/GstWaylandSink:waylandsink0.GstPad:sink: caps = video/x-raw, width=(int)640, height=(int)480, format=(string)YUY2, framerate=(fraction)120/1, interlace-mode=(string)progressive, colorimetry=(string)2:4:16:1
/GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:sink: caps = video/x-raw, width=(int)640, height=(int)480, format=(string)YUY2, framerate=(fraction)120/1, interlace-mode=(string)progressive, colorimetry=(string)2:4:16:1
Redistribute latency...
Got EOS from element "pipeline0".
Execution ended after 0:00:01.011434424
Setting pipeline to NULL ...
Freeing pipeline ...
root@verdin-am62-14917625:~#
Related-to: ELB-5082
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Add overlays for native LVDS being MSP.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Add spidev overlay for Verdin AM62.
Related-to: ELB-5085
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
|
Add overlay to configure the two loudspeaker outputs as a
single Bridge Tied Load output getting higher output power.
Related-to: ELB-4489
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
|
|
Settings for adapter are wrongly redefined in imx7-colibri-eval-v3.dtsi
which leads to this overlay currently not working.
As a workaround, do redefine these settings again in this overlay.
Related-to: ELB-4830
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
The panel-cap-touch-10inch-lvds_overlay was inadvertently using the
adapter rather than the connector for the atmel-mxt capacitive
touch screen.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Move the existing overlays to dtsi files and include them into one
accessory dts.
Provide data-mapping timings appropriately for each machine instead
of the hardcoding and use a single overlay per SoC to avoid code
duplication.
Set the bus-format via toradex specific data-mapping property in
the machine specifig overlay.
Make sure the panel-dpi compatible is set correctly in the display
specific overlay.
While at it use new lines consistently and set sensible width and
height dimension for a fullHD analog RGB monitor.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Move the existing overlays to dtsi files and include them into one
accessory dts.
Provide data-mapping timings appropriately for each machine instead
of the hardcoding and use a single overlay per SoC to avoid code
duplication.
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
Move the existing overlays to dtsi files and include them into one
accessory dts.
Provide data-mapping timings appropriately for each machine instead
of the hardcoding and use a single overlay per SoC to avoid code
duplication.
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
Move the existing overlays to dtsi files and include them into one
accessory dts.
Provide data-mapping timings appropriately for each machine instead
of the hardcoding and use a single overlay per SoC to avoid code
duplication.
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This overlay enables the spidev driver on the apalis imx6 spi interface.
Related-to: ELB-4689
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This overlay enables spidev driver on the colibri imx6 spi interface.
Related-to: ELB-4689
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This overlay enables the spidev driver on the colibri imx7 spi interface.
Related-to: ELB-4689
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This overlay enables spidev driver on the colibri iMX6ULL spi interface.
Related-to: ELB-4689
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This commit corrects the indentation, adds a comment about the the
compatible chipname used to bind the spidev driver and removes the
redundant status variable.
Fixes: d929016d ("verdin-imx8mm: add spidev overlay")
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This commit corrects the indentation, adds a comment about the the
compatible chipname used to bind the spidev driver and removes the
redundant status variable.
Fixes: 9282bdc4 ("verdin-imx8mp: add spidev overlay")
Related-to: ELB-4652
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This commit suppresses compiler warnings about address-cells and
size-cells properties missing in spidev block
Fixes: 9282bdc4 ("verdin-imx8mp: add spidev overlay")
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This commit suppresses compiler warnings about address-cells and
size-cells properties missing in spidev block
Fixes: d929016d ("verdin-imx8mm: add spidev overlay")
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This overlay enables spidev by default.
Related-to: ELB-4652
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
This overlay enables spidev by default.
Related-to: ELB-4652
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
|
|
Fix reset GPIO polarity in-line with the following upstream fix:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=feedaacdadfc332e1a6e436f3adfbc67e244db47
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Add following overlays:
- Parallel RGB support
- Parallel RGB LVDS support
- Atmel MXT TS for boards with Capacitive Touch Connector
- Atmel MXT TS for Capacitive Touch Adapter
- Toradex 7" resistive touchscreen ad7879
Related-to: ELB-4065
Related-to: ELB-4080
Signed-off-by: Oleksii Bidnichenko <oleksii.bidnichenko@toradex.com>
|
|
When the overlays was converting to the syntactic sugar, the ov5640
driver was sat to the wrong i2c channel. Fix it.
Fixes: 9b0e73d2115d ("apalis-imx6: convert ov5640 v1.1b to syntactic sugar")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The correct name for the node is adv_7280, as declared in
imx6qdl-apalis.dtsi.
Related-to: TOR-1692
Signed-off-by: Sergio Prado <sergio.prado@toradex.com>
|
|
Sort overlays' entries in Makefile alphabetically.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add the overlay to support the LCD-LVDS transceiver on Iris v2.0A
in single-channel RGB24 mode.
Related-to: ELB-3898
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add the overlay to support LCD-LVDS transceiver on Iris v2.0A.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add missing emmc version of the module into the compatible lists.
Related-to: ELB-3849
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
colibri-imx7d-emmc target should be compatible to
support capacitive touchscreen on imx7d-emmc
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
Add overlays for:
- Atmel MXT TS for boards with Capacitive Touch Connector
- Atmel MXT TS for Capacitive Touch Adapter
- Fusion F0710A TS for boards with Capacitive Touch Connector
- Fusion F0710A TS for Capacitive Touch Adapter
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
Use the same license as we use on regular linux-tree
Related-to: ELB-2958
Signed-off-by: Philippe Schenker's avatarPhilippe Schenker <philippe.schenker@toradex.com>
|
|
Add overlays for:
- Atmel MXT TS for boards with Capacitive Touch Connector
- Atmel MXT TS for Capacitive Touch Adapter
Related-to: ELB-3243
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The LCD interface of colibri-imx6 codes 24-bit mode in a different way
than all other colibri modules. Thus using RGB24 mode prevents this
overlay to be used with colibri-imx6. Use default RGB666 mode to
make the overlay compatible with all colibri modules.
Fixes: ecde642a77ee ("overlays: colibri-imx8x: move LVDS stuff to common display overlay")
Related-to: ELB-3243
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add an overlay to support the standard VGA monitor.
Related-to: ELB-3246
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add an overlay to support FullHD monitor connected to
a VGA connector of Eval/Aster/Iris board.
Related-to: ELB-3243
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Fix compatible string sets for display and colibri-imx6 overlays.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The HDMI interface remains disabled in the main devicetree.
Add the overlay that turns it on, making able to use HDMI monitors.
Related-to: ELB-3243
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The LVDS display connects via RGB->LVDS converter, so that we can use
the parallel-rgb overlay, setting up only timing and data modes.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The AD7879 resistive touchscreen device remains disabled in the main
devicetree. Add the overlay which turns it on for using with a
Resistive Touch Display 7".
Related-to: ELB-3395
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The LCDIF interface and related devices remain disabled in the main
devicetree. Add an overlay to enable an LCDIF (Parallel RGB)
interface and all related subsystems.
Related-to: ELB-3395
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The STMPE resistive touchscreen device remains disabled in the main devicetree.
Add the overlay to be able using it with Resistive Touch Display 7".
Related-to: ELB-3395
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add an overlay to enable all parallel RGG related subsystems.
Related-to: ELB-3395
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Make lvds overlay working properly, enabling backlight, pwm for
backlight and lvds channel.
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
As it's decided, move all definitions back to the main devicetree.
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
As it was decided, move all definitions back to the main devicetree.
Rename the overlay according to approved naming scheme.
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
As it was decided, move all definitions back to the main devicetree.
Rename the overlay according to approved naming scheme.
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The VGA interface and related stuff remain disabled in the main
devicetree. Add the overlay that turns it on, enabling to use VGA
monitors.
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|