//========================================================================== // // pid_misc.c // // HAL misc board support code for ARM PID7 // //========================================================================== // ####ECOSGPLCOPYRIGHTBEGIN#### // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free // Software Foundation; either version 2 or (at your option) any later // version. // // eCos is distributed in the hope that it will be useful, but WITHOUT // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License // for more details. // // You should have received a copy of the GNU General Public License // along with eCos; if not, write to the Free Software Foundation, Inc., // 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. // // As a special exception, if other files instantiate templates or use // macros or inline functions from this file, or you compile this file // and link it with other works to produce a work based on this file, // this file does not by itself cause the resulting work to be covered by // the GNU General Public License. However the source code for this file // must still be made available in accordance with section (3) of the GNU // General Public License v2. // // This exception does not invalidate any other reasons why a work based // on this file might be covered by the GNU General Public License. // ------------------------------------------- // ####ECOSGPLCOPYRIGHTEND#### //========================================================================== //#####DESCRIPTIONBEGIN#### // // Author(s): gthomas // Contributors: gthomas // Date: 1999-02-20 // Purpose: HAL board support // Description: Implementations of HAL board interfaces // //####DESCRIPTIONEND#### // //===========================================================================*/ #include #include // base types #include // tracing macros #include // assertion macros #include // IO macros #include // Register state info #include #include // necessary? #include // calling interface /*------------------------------------------------------------------------*/ // On-board timer /*------------------------------------------------------------------------*/ // Timer registers #define CYG_DEVICE_TIMER1_BASE 0x0A800020 #define CYG_DEVICE_TIMER1_LOAD \ ((volatile cyg_uint32 *) (CYG_DEVICE_TIMER1_BASE + 0x00)) // Load value, read/write #define CYG_DEVICE_TIMER1_CURRENT \ ((volatile cyg_uint32 *) (CYG_DEVICE_TIMER1_BASE + 0x04)) // Current value, read #define CYG_DEVICE_TIMER1_CONTROL \ ((volatile cyg_uint32 *) (CYG_DEVICE_TIMER1_BASE + 0x08)) // Control register, read/write #define CYG_DEVICE_TIMER1_CLEAR \ ((volatile cyg_uint32 *) (CYG_DEVICE_TIMER1_BASE + 0x0C)) // Clears interrrupt, write only #define CYG_DEVICE_TIMER_BASE 0x0A800020 #define CYG_DEVICE_TIMER_LOAD \ ((volatile cyg_uint32 *) (CYG_DEVICE_TIMER_BASE + 0x00)) // Load value, read/write #define CYG_DEVICE_TIMER_CURRENT \ ((volatile cyg_uint32 *) (CYG_DEVICE_TIMER_BASE + 0x04)) // Current value, read #define CYG_DEVICE_TIMER_CONTROL \ ((volatile cyg_uint32 *) (CYG_DEVICE_TIMER_BASE + 0x08)) // Control register, read/write #define CYG_DEVICE_TIMER_CLEAR \ ((volatile cyg_uint32 *) (CYG_DEVICE_TIMER_BASE + 0x0C)) // Clears interrrupt, write only // Clock/timer control register #define CTL_ENABLE 0x80 // Bit 7: 1 - counter enabled #define CTL_DISABLE 0x00 // 0 - counter disabled #define CTL_FREERUN 0x00 // Bit 6: 0 - free running counter #define CTL_PERIODIC 0x40 // 1 - periodic timer mode #define CTL_SCALE_1 0x00 // Bits 32: 00 - Scale clock by 1 #define CTL_SCALE_16 0x04 // 01 - Scale by 16 #define CTL_SCALE_256 0x08 // 10 - Scale by 256 // 12.8us/tick // Interrupt controller registers #define CYG_DEVICE_ICTL_BASE 0x0A000000 #define CYG_DEVICE_IRQ_Status \ ((volatile cyg_uint32 *) (CYG_DEVICE_ICTL_BASE + 0x00)) // Current status, read only #define CYG_DEVICE_IRQ_Enable \ ((volatile cyg_uint32 *) (CYG_DEVICE_ICTL_BASE + 0x08)) // Enable status, read only #define CYG_DEVICE_IRQ_EnableSet \ ((volatile cyg_uint32 *) (CYG_DEVICE_ICTL_BASE + 0x08)) // Enable (1's only), write only #define CYG_DEVICE_IRQ_EnableClear \ ((volatile cyg_uint32 *) (CYG_DEVICE_ICTL_BASE + 0x0C)) // Disable (1's only), write only static cyg_uint32 _period; void hal_clock_initialize(cyg_uint32 period) { //diag_init(); diag_printf("%s(%d)\n", __PRETTY_FUNCTION__, period); //diag_printf("psr = %x\n", psr()); HAL_WRITE_UINT32(CYG_DEVICE_TIMER_CONTROL, CTL_DISABLE); // Turn off HAL_WRITE_UINT32(CYG_DEVICE_TIMER_LOAD, period); HAL_WRITE_UINT32(CYG_DEVICE_TIMER_CONTROL, CTL_ENABLE | CTL_PERIODIC | CTL_SCALE_16); _period = period; } void hal_clock_reset(cyg_uint32 vector, cyg_uint32 period) { //diag_init(); diag_printf("%s\n", __PRETTY_FUNCTION__); HAL_WRITE_UINT32(CYG_DEVICE_TIMER_CLEAR, 0); _period = period; } void hal_clock_read(cyg_uint32 *pvalue) { cyg_uint32 value; // diag_init(); diag_printf("%s\n", __PRETTY_FUNCTION__); HAL_READ_UINT32(CYG_DEVICE_TIMER_CURRENT, value); value &= 0xFFFF; *pvalue = _period - (value & 0xFFFF); // Note: counter is only 16 bits // and decreases } // ------------------------------------------------------------------------- // // Delay for some number of micro-seconds // void hal_delay_us(cyg_int32 usecs) { cyg_uint32 value; cyg_uint64 ticks = ((usecs*CYGNUM_HAL_RTC_PERIOD*CYGNUM_HAL_RTC_DENOMINATOR)/1000000); HAL_WRITE_UINT32(CYG_DEVICE_TIMER1_CONTROL, CTL_DISABLE); // Turn off HAL_WRITE_UINT32(CYG_DEVICE_TIMER1_LOAD, ticks); HAL_WRITE_UINT32(CYG_DEVICE_TIMER1_CONTROL, CTL_ENABLE | CTL_FREERUN | CTL_SCALE_16); // Wait for timer to underflow do { HAL_READ_UINT32(CYG_DEVICE_TIMER_CURRENT, value); value &= 0xFFFF; } while (value < 0x7fff); HAL_WRITE_UINT32(CYG_DEVICE_TIMER1_CONTROL, CTL_DISABLE); // Turn off } // ------------------------------------------------------------------------- void hal_hardware_init(void) { // Any hardware/platform initialization that needs to be done. HAL_WRITE_UINT32(CYG_DEVICE_IRQ_EnableClear, 0xFFFF); // Clear all // interrupt sources // Set up eCos/ROM interfaces hal_if_init(); } // // This routine is called to respond to a hardware interrupt (IRQ). It // should interrogate the hardware and return the IRQ vector number. int hal_IRQ_handler(void) { // Do hardware-level IRQ handling int irq_status, vector; HAL_READ_UINT32(CYG_DEVICE_IRQ_Status, irq_status); //diag_init(); diag_printf("%s, status: %x\n", __PRETTY_FUNCTION__, irq_status); for (vector = 1; vector < 16; vector++) { if (irq_status & (1<