move to cmakeapalis-tk1-k20-freertos-v9

Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com>

1 files changed, 0 insertions, 421 deletions

diff --git a/drivers/fsl_pmc.h b/drivers/fsl_pmc.h
deleted file mode 100644
index 99fc149..0000000
--- a/drivers/fsl_pmc.h
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * Copyright (c) 2015, Freescale Semiconductor, Inc.
- * Copyright 2016-2017 NXP
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * o Redistributions of source code must retain the above copyright notice, this list
- *   of conditions and the following disclaimer.
- *
- * o Redistributions in binary form must reproduce the above copyright notice, this
- *   list of conditions and the following disclaimer in the documentation and/or
- *   other materials provided with the distribution.
- *
- * o Neither the name of the copyright holder nor the names of its
- *   contributors may be used to endorse or promote products derived from this
- *   software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#ifndef _FSL_PMC_H_
-#define _FSL_PMC_H_
-
-#include "fsl_common.h"
-
-/*! @addtogroup pmc */
-/*! @{ */
-
-
-/*******************************************************************************
- * Definitions
- ******************************************************************************/
-
-/*! @name Driver version */
-/*@{*/
-/*! @brief PMC driver version */
-#define FSL_PMC_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) /*!< Version 2.0.0. */
-/*@}*/
-
-#if (defined(FSL_FEATURE_PMC_HAS_LVDV) && FSL_FEATURE_PMC_HAS_LVDV)
-/*!
- * @brief Low-voltage Detect Voltage Select
- */
-typedef enum _pmc_low_volt_detect_volt_select
-{
-    kPMC_LowVoltDetectLowTrip = 0U, /*!< Low-trip point selected (VLVD = VLVDL )*/
-    kPMC_LowVoltDetectHighTrip = 1U /*!< High-trip point selected (VLVD = VLVDH )*/
-} pmc_low_volt_detect_volt_select_t;
-#endif
-
-#if (defined(FSL_FEATURE_PMC_HAS_LVWV) && FSL_FEATURE_PMC_HAS_LVWV)
-/*!
- * @brief Low-voltage Warning Voltage Select
- */
-typedef enum _pmc_low_volt_warning_volt_select
-{
-    kPMC_LowVoltWarningLowTrip = 0U,  /*!< Low-trip point selected (VLVW = VLVW1)*/
-    kPMC_LowVoltWarningMid1Trip = 1U, /*!< Mid 1 trip point selected (VLVW = VLVW2)*/
-    kPMC_LowVoltWarningMid2Trip = 2U, /*!< Mid 2 trip point selected (VLVW = VLVW3)*/
-    kPMC_LowVoltWarningHighTrip = 3U  /*!< High-trip point selected (VLVW = VLVW4)*/
-} pmc_low_volt_warning_volt_select_t;
-#endif
-
-#if (defined(FSL_FEATURE_PMC_HAS_HVDSC1) && FSL_FEATURE_PMC_HAS_HVDSC1)
-/*!
- * @brief High-voltage Detect Voltage Select
- */
-typedef enum _pmc_high_volt_detect_volt_select
-{
-    kPMC_HighVoltDetectLowTrip = 0U, /*!< Low-trip point selected (VHVD = VHVDL )*/
-    kPMC_HighVoltDetectHighTrip = 1U /*!< High-trip point selected (VHVD = VHVDH )*/
-} pmc_high_volt_detect_volt_select_t;
-#endif /* FSL_FEATURE_PMC_HAS_HVDSC1 */
-
-#if (defined(FSL_FEATURE_PMC_HAS_BGBDS) && FSL_FEATURE_PMC_HAS_BGBDS)
-/*!
- * @brief Bandgap Buffer Drive Select.
- */
-typedef enum _pmc_bandgap_buffer_drive_select
-{
-    kPMC_BandgapBufferDriveLow = 0U, /*!< Low-drive.  */
-    kPMC_BandgapBufferDriveHigh = 1U /*!< High-drive. */
-} pmc_bandgap_buffer_drive_select_t;
-#endif /* FSL_FEATURE_PMC_HAS_BGBDS */
-
-#if (defined(FSL_FEATURE_PMC_HAS_VLPO) && FSL_FEATURE_PMC_HAS_VLPO)
-/*!
- * @brief VLPx Option
- */
-typedef enum _pmc_vlp_freq_option
-{
-    kPMC_FreqRestrict = 0U,  /*!< Frequency is restricted in VLPx mode. */
-    kPMC_FreqUnrestrict = 1U /*!< Frequency is unrestricted in VLPx mode. */
-} pmc_vlp_freq_mode_t;
-#endif /* FSL_FEATURE_PMC_HAS_VLPO */
-
-#if (defined(FSL_FEATURE_PMC_HAS_VERID) && FSL_FEATURE_PMC_HAS_VERID)
-/*!
- @brief IP version ID definition.
- */
-typedef struct _pmc_version_id
-{
-    uint16_t feature; /*!< Feature Specification Number. */
-    uint8_t minor;    /*!< Minor version number.         */
-    uint8_t major;    /*!< Major version number.         */
-} pmc_version_id_t;
-#endif /* FSL_FEATURE_PMC_HAS_VERID */
-
-#if (defined(FSL_FEATURE_PMC_HAS_PARAM) && FSL_FEATURE_PMC_HAS_PARAM)
-/*! @brief IP parameter definition. */
-typedef struct _pmc_param
-{
-    bool vlpoEnable; /*!< VLPO enable. */
-    bool hvdEnable;  /*!< HVD enable.  */
-} pmc_param_t;
-#endif /* FSL_FEATURE_PMC_HAS_PARAM */
-
-/*!
- * @brief Low-voltage Detect Configuration Structure
- */
-typedef struct _pmc_low_volt_detect_config
-{
-    bool enableInt;   /*!< Enable interrupt when Low-voltage detect*/
-    bool enableReset; /*!< Enable system reset when Low-voltage detect*/
-#if (defined(FSL_FEATURE_PMC_HAS_LVDV) && FSL_FEATURE_PMC_HAS_LVDV)
-    pmc_low_volt_detect_volt_select_t voltSelect; /*!< Low-voltage detect trip point voltage selection*/
-#endif
-} pmc_low_volt_detect_config_t;
-
-/*!
- * @brief Low-voltage Warning Configuration Structure
- */
-typedef struct _pmc_low_volt_warning_config
-{
-    bool enableInt; /*!< Enable interrupt when low-voltage warning*/
-#if (defined(FSL_FEATURE_PMC_HAS_LVWV) && FSL_FEATURE_PMC_HAS_LVWV)
-    pmc_low_volt_warning_volt_select_t voltSelect; /*!< Low-voltage warning trip point voltage selection*/
-#endif
-} pmc_low_volt_warning_config_t;
-
-#if (defined(FSL_FEATURE_PMC_HAS_HVDSC1) && FSL_FEATURE_PMC_HAS_HVDSC1)
-/*!
- * @brief High-voltage Detect Configuration Structure
- */
-typedef struct _pmc_high_volt_detect_config
-{
-    bool enableInt;                                /*!< Enable interrupt when high-voltage detect*/
-    bool enableReset;                              /*!< Enable system reset when high-voltage detect*/
-    pmc_high_volt_detect_volt_select_t voltSelect; /*!< High-voltage detect trip point voltage selection*/
-} pmc_high_volt_detect_config_t;
-#endif /* FSL_FEATURE_PMC_HAS_HVDSC1 */
-
-#if ((defined(FSL_FEATURE_PMC_HAS_BGBE) && FSL_FEATURE_PMC_HAS_BGBE) || \
-     (defined(FSL_FEATURE_PMC_HAS_BGEN) && FSL_FEATURE_PMC_HAS_BGEN) || \
-     (defined(FSL_FEATURE_PMC_HAS_BGBDS) && FSL_FEATURE_PMC_HAS_BGBDS))
-/*!
- * @brief Bandgap Buffer configuration.
- */
-typedef struct _pmc_bandgap_buffer_config
-{
-#if (defined(FSL_FEATURE_PMC_HAS_BGBE) && FSL_FEATURE_PMC_HAS_BGBE)
-    bool enable; /*!< Enable bandgap buffer.                   */
-#endif
-#if (defined(FSL_FEATURE_PMC_HAS_BGEN) && FSL_FEATURE_PMC_HAS_BGEN)
-    bool enableInLowPowerMode; /*!< Enable bandgap buffer in low-power mode. */
-#endif                         /* FSL_FEATURE_PMC_HAS_BGEN */
-#if (defined(FSL_FEATURE_PMC_HAS_BGBDS) && FSL_FEATURE_PMC_HAS_BGBDS)
-    pmc_bandgap_buffer_drive_select_t drive; /*!< Bandgap buffer drive select.             */
-#endif                                       /* FSL_FEATURE_PMC_HAS_BGBDS */
-} pmc_bandgap_buffer_config_t;
-#endif
-
-/*******************************************************************************
- * API
- ******************************************************************************/
-
-#if defined(__cplusplus)
-extern "C" {
-#endif /* __cplusplus*/
-
-/*! @name Power Management Controller Control APIs*/
-/*@{*/
-
-#if (defined(FSL_FEATURE_PMC_HAS_VERID) && FSL_FEATURE_PMC_HAS_VERID)
-/*!
- * @brief Gets the PMC version ID.
- *
- * This function gets the PMC version ID, including major version number,
- * minor version number, and a feature specification number.
- *
- * @param base PMC peripheral base address.
- * @param versionId     Pointer to version ID structure.
- */
-static inline void PMC_GetVersionId(PMC_Type *base, pmc_version_id_t *versionId)
-{
-    *((uint32_t *)versionId) = base->VERID;
-}
-#endif /* FSL_FEATURE_PMC_HAS_VERID */
-
-#if (defined(FSL_FEATURE_PMC_HAS_PARAM) && FSL_FEATURE_PMC_HAS_PARAM)
-/*!
- * @brief Gets the PMC parameter.
- *
- * This function gets the PMC parameter including the VLPO enable and the HVD enable.
- *
- * @param base PMC peripheral base address.
- * @param param         Pointer to PMC param structure.
- */
-void PMC_GetParam(PMC_Type *base, pmc_param_t *param);
-#endif
-
-/*!
- * @brief Configures the low-voltage detect setting.
- *
- * This function configures the low-voltage detect setting, including the trip
- * point voltage setting, enables or disables the interrupt, enables or disables the system reset.
- *
- * @param base PMC peripheral base address.
- * @param config  Low-voltage detect configuration structure.
- */
-void PMC_ConfigureLowVoltDetect(PMC_Type *base, const pmc_low_volt_detect_config_t *config);
-
-/*!
- * @brief Gets the Low-voltage Detect Flag status.
- *
- * This function  reads the current LVDF status. If it returns 1, a low-voltage event is detected.
- *
- * @param base PMC peripheral base address.
- * @return Current low-voltage detect flag
- *                - true: Low-voltage detected
- *                - false: Low-voltage not detected
- */
-static inline bool PMC_GetLowVoltDetectFlag(PMC_Type *base)
-{
-    return (bool)(base->LVDSC1 & PMC_LVDSC1_LVDF_MASK);
-}
-
-/*!
- * @brief Acknowledges clearing the Low-voltage Detect flag.
- *
- * This function acknowledges the low-voltage detection errors (write 1 to
- * clear LVDF).
- *
- * @param base PMC peripheral base address.
- */
-static inline void PMC_ClearLowVoltDetectFlag(PMC_Type *base)
-{
-    base->LVDSC1 |= PMC_LVDSC1_LVDACK_MASK;
-}
-
-/*!
- * @brief Configures the low-voltage warning setting.
- *
- * This function configures the low-voltage warning setting, including the trip
- * point voltage setting and enabling or disabling the interrupt.
- *
- * @param base PMC peripheral base address.
- * @param config  Low-voltage warning configuration structure.
- */
-void PMC_ConfigureLowVoltWarning(PMC_Type *base, const pmc_low_volt_warning_config_t *config);
-
-/*!
- * @brief Gets the Low-voltage Warning Flag status.
- *
- * This function polls the current LVWF status. When 1 is returned, it
- * indicates a low-voltage warning event. LVWF is set when V Supply transitions
- * below the trip point or after reset and V Supply is already below the V LVW.
- *
- * @param base PMC peripheral base address.
- * @return Current LVWF status
- *                  - true: Low-voltage Warning Flag is set.
- *                  - false: the  Low-voltage Warning does not happen.
- */
-static inline bool PMC_GetLowVoltWarningFlag(PMC_Type *base)
-{
-    return (bool)(base->LVDSC2 & PMC_LVDSC2_LVWF_MASK);
-}
-
-/*!
- * @brief Acknowledges the Low-voltage Warning flag.
- *
- * This function acknowledges the low voltage warning errors (write 1 to
- * clear LVWF).
- *
- * @param base PMC peripheral base address.
- */
-static inline void PMC_ClearLowVoltWarningFlag(PMC_Type *base)
-{
-    base->LVDSC2 |= PMC_LVDSC2_LVWACK_MASK;
-}
-
-#if (defined(FSL_FEATURE_PMC_HAS_HVDSC1) && FSL_FEATURE_PMC_HAS_HVDSC1)
-/*!
- * @brief Configures the high-voltage detect setting.
- *
- * This function configures the high-voltage detect setting, including the trip
- * point voltage setting, enabling or disabling the interrupt, enabling or disabling the system reset.
- *
- * @param base PMC peripheral base address.
- * @param config  High-voltage detect configuration structure.
- */
-void PMC_ConfigureHighVoltDetect(PMC_Type *base, const pmc_high_volt_detect_config_t *config);
-
-/*!
- * @brief Gets the High-voltage Detect Flag status.
- *
- * This function  reads the current HVDF status. If it returns 1, a low
- * voltage event is detected.
- *
- * @param base PMC peripheral base address.
- * @return Current high-voltage detect flag
- *                - true: High-voltage detected
- *                - false: High-voltage not detected
- */
-static inline bool PMC_GetHighVoltDetectFlag(PMC_Type *base)
-{
-    return (bool)(base->HVDSC1 & PMC_HVDSC1_HVDF_MASK);
-}
-
-/*!
- * @brief Acknowledges clearing the High-voltage Detect flag.
- *
- * This function acknowledges the high-voltage detection errors (write 1 to
- * clear HVDF).
- *
- * @param base PMC peripheral base address.
- */
-static inline void PMC_ClearHighVoltDetectFlag(PMC_Type *base)
-{
-    base->HVDSC1 |= PMC_HVDSC1_HVDACK_MASK;
-}
-#endif /* FSL_FEATURE_PMC_HAS_HVDSC1 */
-
-#if ((defined(FSL_FEATURE_PMC_HAS_BGBE) && FSL_FEATURE_PMC_HAS_BGBE) || \
-     (defined(FSL_FEATURE_PMC_HAS_BGEN) && FSL_FEATURE_PMC_HAS_BGEN) || \
-     (defined(FSL_FEATURE_PMC_HAS_BGBDS) && FSL_FEATURE_PMC_HAS_BGBDS))
-/*!
- * @brief Configures the PMC bandgap.
- *
- * This function configures the PMC bandgap, including the drive select and
- * behavior in low-power mode.
- *
- * @param base PMC peripheral base address.
- * @param config Pointer to the configuration structure
- */
-void PMC_ConfigureBandgapBuffer(PMC_Type *base, const pmc_bandgap_buffer_config_t *config);
-#endif
-
-#if (defined(FSL_FEATURE_PMC_HAS_ACKISO) && FSL_FEATURE_PMC_HAS_ACKISO)
-/*!
- * @brief Gets the acknowledge Peripherals and I/O pads isolation flag.
- *
- * This function  reads the Acknowledge Isolation setting that indicates
- * whether certain peripherals and the I/O pads are in a latched state as
- * a result of having been in the VLLS mode.
- *
- * @param base PMC peripheral base address.
- * @param base  Base address for current PMC instance.
- * @return ACK isolation
- *               0 - Peripherals and I/O pads are in a normal run state.
- *               1 - Certain peripherals and I/O pads are in an isolated and
- *                   latched state.
- */
-static inline bool PMC_GetPeriphIOIsolationFlag(PMC_Type *base)
-{
-    return (bool)(base->REGSC & PMC_REGSC_ACKISO_MASK);
-}
-
-/*!
- * @brief Acknowledges the isolation flag to Peripherals and I/O pads.
- *
- * This function  clears the ACK Isolation flag. Writing one to this setting
- * when it is set releases the I/O pads and certain peripherals to their normal
- * run mode state.
- *
- * @param base PMC peripheral base address.
- */
-static inline void PMC_ClearPeriphIOIsolationFlag(PMC_Type *base)
-{
-    base->REGSC |= PMC_REGSC_ACKISO_MASK;
-}
-#endif /* FSL_FEATURE_PMC_HAS_ACKISO */
-
-#if (defined(FSL_FEATURE_PMC_HAS_REGONS) && FSL_FEATURE_PMC_HAS_REGONS)
-/*!
- * @brief Gets the regulator regulation status.
- *
- * This function  returns the regulator to run a regulation status. It provides
- * the current status of the internal voltage regulator.
- *
- * @param base PMC peripheral base address.
- * @param base  Base address for current PMC instance.
- * @return Regulation status
- *               0 - Regulator is in a stop regulation or in transition to/from the regulation.
- *               1 - Regulator is in a run regulation.
- *
- */
-static inline bool PMC_IsRegulatorInRunRegulation(PMC_Type *base)
-{
-    return (bool)(base->REGSC & PMC_REGSC_REGONS_MASK);
-}
-#endif /* FSL_FEATURE_PMC_HAS_REGONS */
-
-/*@}*/
-
-#if defined(__cplusplus)
-}
-#endif /* __cplusplus*/
-
-/*! @}*/
-
-#endif /* _FSL_PMC_H_*/