diff options
Diffstat (limited to 'CMSIS/Driver/Include/Driver_CAN.h')
-rw-r--r-- | CMSIS/Driver/Include/Driver_CAN.h | 361 |
1 files changed, 361 insertions, 0 deletions
diff --git a/CMSIS/Driver/Include/Driver_CAN.h b/CMSIS/Driver/Include/Driver_CAN.h new file mode 100644 index 0000000..2c22219 --- /dev/null +++ b/CMSIS/Driver/Include/Driver_CAN.h @@ -0,0 +1,361 @@ +/* ----------------------------------------------------------------------------- + * Copyright (c) 2013-2015 ARM Ltd. + * + * This software is provided 'as-is', without any express or implied warranty. + * In no event will the authors be held liable for any damages arising from + * the use of this software. Permission is granted to anyone to use this + * software for any purpose, including commercial applications, and to alter + * it and redistribute it freely, subject to the following restrictions: + * + * 1. The origin of this software must not be misrepresented; you must not + * claim that you wrote the original software. If you use this software in + * a product, an acknowledgment in the product documentation would be + * appreciated but is not required. + * + * 2. Altered source versions must be plainly marked as such, and must not be + * misrepresented as being the original software. + * + * 3. This notice may not be removed or altered from any source distribution. + * + * + * $Date: 9. September 2015 + * $Revision: V1.00 + * + * Project: CAN (Controller Area Network) Driver definitions + * -------------------------------------------------------------------------- */ + +/* History: + * Version 1.00 + * Initial release + */ + +#ifndef __DRIVER_CAN_H +#define __DRIVER_CAN_H + +#include "Driver_Common.h" + +#define ARM_CAN_API_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(1,0)/* API version */ + + +/****** CAN Bitrate selection codes *****/ +typedef enum _ARM_CAN_BITRATE_SELECT { + ARM_CAN_BITRATE_NOMINAL, ///< Select nominal (flexible data-rate arbitration) bitrate + ARM_CAN_BITRATE_FD_DATA ///< Select flexible data-rate data bitrate +} ARM_CAN_BITRATE_SELECT; + +/****** CAN Bit Propagation Segment codes (PROP_SEG) *****/ +#define ARM_CAN_BIT_PROP_SEG_Pos 0UL ///< bits 7..0 +#define ARM_CAN_BIT_PROP_SEG_Msk (0xFFUL << ARM_CAN_BIT_PROP_SEG_Pos) +#define ARM_CAN_BIT_PROP_SEG(x) (((x) << ARM_CAN_BIT_PROP_SEG_Pos) & ARM_CAN_BIT_PROP_SEG_Msk) + +/****** CAN Bit Phase Buffer Segment 1 (PHASE_SEG1) codes *****/ +#define ARM_CAN_BIT_PHASE_SEG1_Pos 8UL ///< bits 15..8 +#define ARM_CAN_BIT_PHASE_SEG1_Msk (0xFFUL << ARM_CAN_BIT_PHASE_SEG1_Pos) +#define ARM_CAN_BIT_PHASE_SEG1(x) (((x) << ARM_CAN_BIT_PHASE_SEG1_Pos) & ARM_CAN_BIT_PHASE_SEG1_Msk) + +/****** CAN Bit Phase Buffer Segment 2 (PHASE_SEG2) codes *****/ +#define ARM_CAN_BIT_PHASE_SEG2_Pos 16UL ///< bits 23..16 +#define ARM_CAN_BIT_PHASE_SEG2_Msk (0xFFUL << ARM_CAN_BIT_PHASE_SEG2_Pos) +#define ARM_CAN_BIT_PHASE_SEG2(x) (((x) << ARM_CAN_BIT_PHASE_SEG2_Pos) & ARM_CAN_BIT_PHASE_SEG2_Msk) + +/****** CAN Bit (Re)Synchronization Jump Width Segment (SJW) *****/ +#define ARM_CAN_BIT_SJW_Pos 24UL ///< bits 28..24 +#define ARM_CAN_BIT_SJW_Msk (0x1FUL << ARM_CAN_BIT_SJW_Pos) +#define ARM_CAN_BIT_SJW(x) (((x) << ARM_CAN_BIT_SJW_Pos) & ARM_CAN_BIT_SJW_Msk) + +/****** CAN Mode codes *****/ +typedef enum _ARM_CAN_MODE { + ARM_CAN_MODE_INITIALIZATION, ///< Initialization mode + ARM_CAN_MODE_NORMAL, ///< Normal operation mode + ARM_CAN_MODE_RESTRICTED, ///< Restricted operation mode + ARM_CAN_MODE_MONITOR, ///< Bus monitoring mode + ARM_CAN_MODE_LOOPBACK_INTERNAL, ///< Loopback internal mode + ARM_CAN_MODE_LOOPBACK_EXTERNAL ///< Loopback external mode +} ARM_CAN_MODE; + +/****** CAN Filter Operation codes *****/ +typedef enum _ARM_CAN_FILTER_OPERATION { + ARM_CAN_FILTER_ID_EXACT_ADD, ///< Add exact id filter + ARM_CAN_FILTER_ID_EXACT_REMOVE, ///< Remove exact id filter + ARM_CAN_FILTER_ID_RANGE_ADD, ///< Add range id filter + ARM_CAN_FILTER_ID_RANGE_REMOVE, ///< Remove range id filter + ARM_CAN_FILTER_ID_MASKABLE_ADD, ///< Add maskable id filter + ARM_CAN_FILTER_ID_MASKABLE_REMOVE ///< Remove maskable id filter +} ARM_CAN_FILTER_OPERATION; + +/****** CAN Object Configuration codes *****/ +typedef enum _ARM_CAN_OBJ_CONFIG { + ARM_CAN_OBJ_INACTIVE, ///< CAN object inactive + ARM_CAN_OBJ_TX, ///< CAN transmit object + ARM_CAN_OBJ_RX, ///< CAN receive object + ARM_CAN_OBJ_RX_RTR_TX_DATA, ///< CAN object that on RTR reception automatically transmits Data Frame + ARM_CAN_OBJ_TX_RTR_RX_DATA ///< CAN object that transmits RTR and automatically receives Data Frame +} ARM_CAN_OBJ_CONFIG; + +/** +\brief CAN Object Capabilities +*/ +typedef struct _ARM_CAN_OBJ_CAPABILITIES { + uint32_t tx : 1; ///< Object supports transmission + uint32_t rx : 1; ///< Object supports reception + uint32_t rx_rtr_tx_data : 1; ///< Object supports RTR reception and automatic Data Frame transmission + uint32_t tx_rtr_rx_data : 1; ///< Object supports RTR transmission and automatic Data Frame reception + uint32_t multiple_filters : 1; ///< Object allows assignment of multiple filters to it + uint32_t exact_filtering : 1; ///< Object supports exact identifier filtering + uint32_t range_filtering : 1; ///< Object supports range identifier filtering + uint32_t mask_filtering : 1; ///< Object supports mask identifier filtering + uint32_t message_depth : 8; ///< Number of messages buffers (FIFO) for that object +} ARM_CAN_OBJ_CAPABILITIES; + +/****** CAN Control Function Operation codes *****/ +#define ARM_CAN_CONTROL_Pos 0UL +#define ARM_CAN_CONTROL_Msk (0xFFUL << ARM_CAN_CONTROL_Pos) +#define ARM_CAN_SET_FD_MODE (1UL << ARM_CAN_CONTROL_Pos) ///< Set FD operation mode; arg: 0 = disable, 1 = enable +#define ARM_CAN_ABORT_MESSAGE_SEND (2UL << ARM_CAN_CONTROL_Pos) ///< Abort sending of CAN message; arg = object +#define ARM_CAN_CONTROL_RETRANSMISSION (3UL << ARM_CAN_CONTROL_Pos) ///< Enable/disable automatic retransmission; arg: 0 = disable, 1 = enable (default state) +#define ARM_CAN_SET_TRANSCEIVER_DELAY (4UL << ARM_CAN_CONTROL_Pos) ///< Set transceiver delay; arg = delay in time quanta + +/****** CAN ID Frame Format codes *****/ +#define ARM_CAN_ID_IDE_Pos 31UL +#define ARM_CAN_ID_IDE_Msk (1UL << ARM_CAN_ID_IDE_Pos) + +/****** CAN Identifier encoding *****/ +#define ARM_CAN_STANDARD_ID(id) (id & 0x000007FFUL) ///< CAN identifier in standard format (11-bits) +#define ARM_CAN_EXTENDED_ID(id) ((id & 0x1FFFFFFFUL) | ARM_CAN_ID_IDE_Msk)///< CAN identifier in extended format (29-bits) + +/** +\brief CAN Message Information +*/ +typedef struct _ARM_CAN_MSG_INFO { + uint32_t id; ///< CAN identifier with frame format specifier (bit 31) + uint32_t rtr : 1; ///< Remote transmission request frame + uint32_t edl : 1; ///< Flexible data-rate format extended data length + uint32_t brs : 1; ///< Flexible data-rate format with bitrate switch + uint32_t esi : 1; ///< Flexible data-rate format error state indicator + uint32_t dlc : 4; ///< Data length code +} ARM_CAN_MSG_INFO; + +/****** CAN specific error code *****/ +#define ARM_CAN_INVALID_BITRATE_SELECT (ARM_DRIVER_ERROR_SPECIFIC - 1) ///< Bitrate selection not supported +#define ARM_CAN_INVALID_BITRATE (ARM_DRIVER_ERROR_SPECIFIC - 2) ///< Requested bitrate not supported +#define ARM_CAN_INVALID_BIT_PROP_SEG (ARM_DRIVER_ERROR_SPECIFIC - 3) ///< Propagation segment value not supported +#define ARM_CAN_INVALID_BIT_PHASE_SEG1 (ARM_DRIVER_ERROR_SPECIFIC - 4) ///< Phase segment 1 value not supported +#define ARM_CAN_INVALID_BIT_PHASE_SEG2 (ARM_DRIVER_ERROR_SPECIFIC - 5) ///< Phase segment 2 value not supported +#define ARM_CAN_INVALID_BIT_SJW (ARM_DRIVER_ERROR_SPECIFIC - 6) ///< SJW value not supported +#define ARM_CAN_NO_MESSAGE_AVAILABLE (ARM_DRIVER_ERROR_SPECIFIC - 7) ///< Message is not available + +/****** CAN Status codes *****/ +#define ARM_CAN_UNIT_STATE_INACTIVE (0U) ///< Unit state: Not active on bus (initialize or error bus off) +#define ARM_CAN_UNIT_STATE_ACTIVE (1U) ///< Unit state: Active on bus (can generate active error frame) +#define ARM_CAN_UNIT_STATE_PASSIVE (2U) ///< Unit state: Error passive (can not generate active error frame) +#define ARM_CAN_LEC_NO_ERROR (0U) ///< Last error code: No error +#define ARM_CAN_LEC_BIT_ERROR (1U) ///< Last error code: Bit error +#define ARM_CAN_LEC_STUFF_ERROR (2U) ///< Last error code: Bit stuffing error +#define ARM_CAN_LEC_CRC_ERROR (3U) ///< Last error code: CRC error +#define ARM_CAN_LEC_FORM_ERROR (4U) ///< Last error code: Illegal fixed-form bit +#define ARM_CAN_LEC_ACK_ERROR (5U) ///< Last error code: Acknowledgement error + +/** +\brief CAN Status +*/ +typedef struct _ARM_CAN_STATUS { + uint32_t unit_state : 4; ///< Unit bus state + uint32_t last_error_code : 4; ///< Last error code + uint32_t tx_error_count : 8; ///< Transmitter error count + uint32_t rx_error_count : 8; ///< Receiver error count +} ARM_CAN_STATUS; + + +/****** CAN Unit Event *****/ +#define ARM_CAN_EVENT_UNIT_ACTIVE (1U) ///< Unit entered Error Active state +#define ARM_CAN_EVENT_UNIT_WARNING (2U) ///< Unit entered Error Warning state (one or both error counters >= 96) +#define ARM_CAN_EVENT_UNIT_PASSIVE (3U) ///< Unit entered Error Passive state +#define ARM_CAN_EVENT_UNIT_BUS_OFF (4U) ///< Unit entered bus off state + +/****** CAN Send/Receive Event *****/ +#define ARM_CAN_EVENT_SEND_COMPLETE (1UL << 0) ///< Send complete +#define ARM_CAN_EVENT_RECEIVE (1UL << 1) ///< Message received +#define ARM_CAN_EVENT_RECEIVE_OVERRUN (1UL << 2) ///< Received message overrun + + +// Function documentation +/** + \fn ARM_DRIVER_VERSION ARM_CAN_GetVersion (void) + \brief Get driver version. + \return \ref ARM_DRIVER_VERSION + + \fn ARM_CAN_CAPABILITIES ARM_CAN_GetCapabilities (void) + \brief Get driver capabilities. + \return \ref ARM_CAN_CAPABILITIES + + \fn int32_t ARM_CAN_Initialize (ARM_CAN_SignalUnitEvent_t cb_unit_event, + ARM_CAN_SignalObjectEvent_t cb_object_event) + \brief Initialize CAN interface and register signal (callback) functions. + \param[in] cb_unit_event Pointer to \ref ARM_CAN_SignalUnitEvent callback function + \param[in] cb_object_event Pointer to \ref ARM_CAN_SignalObjectEvent callback function + \return \ref execution_status + + \fn int32_t ARM_CAN_Uninitialize (void) + \brief De-initialize CAN interface. + \return \ref execution_status + + \fn int32_t ARM_CAN_PowerControl (ARM_POWER_STATE state) + \brief Control CAN interface power. + \param[in] state Power state + - \ref ARM_POWER_OFF : power off: no operation possible + - \ref ARM_POWER_LOW : low power mode: retain state, detect and signal wake-up events + - \ref ARM_POWER_FULL : power on: full operation at maximum performance + \return \ref execution_status + + \fn uint32_t ARM_CAN_GetClock (void) + \brief Retrieve CAN base clock frequency. + \return base clock frequency + + \fn int32_t ARM_CAN_SetBitrate (ARM_CAN_BITRATE_SELECT select, uint32_t bitrate, uint32_t bit_segments) + \brief Set bitrate for CAN interface. + \param[in] select Bitrate selection + - \ref ARM_CAN_BITRATE_NOMINAL : nominal (flexible data-rate arbitration) bitrate + - \ref ARM_CAN_BITRATE_FD_DATA : flexible data-rate data bitrate + \param[in] bitrate Bitrate + \param[in] bit_segments Segment time quanta for signal sampling + \return \ref execution_status + + \fn int32_t ARM_CAN_SetMode (ARM_CAN_MODE mode) + \brief Set operating mode for CAN interface. + \param[in] mode Operating mode + - \ref ARM_CAN_MODE_INITIALIZATION : initialization mode + - \ref ARM_CAN_MODE_NORMAL : normal operation mode + - \ref ARM_CAN_MODE_RESTRICTED : restricted operation mode + - \ref ARM_CAN_MODE_MONITOR : bus monitoring mode + - \ref ARM_CAN_MODE_LOOPBACK_INTERNAL : loopback internal mode + - \ref ARM_CAN_MODE_LOOPBACK_EXTERNAL : loopback external mode + \return \ref execution_status + + \fn ARM_CAN_OBJ_CAPABILITIES ARM_CAN_ObjectGetCapabilities (uint32_t obj_idx) + \brief Retrieve capabilities of an object. + \param[in] obj_idx Object index + \return \ref ARM_CAN_OBJ_CAPABILITIES + + \fn int32_t ARM_CAN_ObjectSetFilter (uint32_t obj_idx, ARM_CAN_FILTER_OPERATION operation, uint32_t id, uint32_t arg) + \brief Add or remove filter for message reception. + \param[in] obj_idx Object index of object that filter should be or is assigned to + \param[in] operation Operation on filter + - \ref ARM_CAN_FILTER_ID_EXACT_ADD : add exact id filter + - \ref ARM_CAN_FILTER_ID_EXACT_REMOVE : remove exact id filter + - \ref ARM_CAN_FILTER_ID_RANGE_ADD : add range id filter + - \ref ARM_CAN_FILTER_ID_RANGE_REMOVE : remove range id filter + - \ref ARM_CAN_FILTER_ID_MASKABLE_ADD : add maskable id filter + - \ref ARM_CAN_FILTER_ID_MASKABLE_REMOVE : remove maskable id filter + \param[in] id ID or start of ID range (depending on filter type) + \param[in] arg Mask or end of ID range (depending on filter type) + \return \ref execution_status + + \fn int32_t ARM_CAN_ObjectConfigure (uint32_t obj_idx, ARM_CAN_OBJ_CONFIG obj_cfg) + \brief Configure object. + \param[in] obj_idx Object index + \param[in] obj_cfg Object configuration state + - \ref ARM_CAN_OBJ_INACTIVE : deactivate object + - \ref ARM_CAN_OBJ_RX : configure object for reception + - \ref ARM_CAN_OBJ_TX : configure object for transmission + - \ref ARM_CAN_OBJ_RX_RTR_TX_DATA : configure object that on RTR reception automatically transmits Data Frame + - \ref ARM_CAN_OBJ_TX_RTR_RX_DATA : configure object that transmits RTR and automatically receives Data Frame + \return \ref execution_status + + \fn int32_t ARM_CAN_MessageSend (uint32_t obj_idx, ARM_CAN_MSG_INFO *msg_info, const uint8_t *data, uint8_t size) + \brief Send message on CAN bus. + \param[in] obj_idx Object index + \param[in] msg_info Pointer to CAN message information + \param[in] data Pointer to data buffer + \param[in] size Number of data bytes to send + \return value >= 0 number of data bytes accepted to send + \return value < 0 \ref execution_status + + \fn int32_t ARM_CAN_MessageRead (uint32_t obj_idx, ARM_CAN_MSG_INFO *msg_info, uint8_t *data, uint8_t size) + \brief Read message received on CAN bus. + \param[in] obj_idx Object index + \param[out] msg_info Pointer to read CAN message information + \param[out] data Pointer to data buffer for read data + \param[in] size Maximum number of data bytes to read + \return value >= 0 number of data bytes read + \return value < 0 \ref execution_status + + \fn int32_t ARM_CAN_Control (uint32_t control, uint32_t arg) + \brief Control CAN interface. + \param[in] control Operation + - \ref ARM_CAN_SET_FD_MODE : set FD operation mode + - \ref ARM_CAN_ABORT_MESSAGE_SEND : abort sending of CAN message + - \ref ARM_CAN_CONTROL_RETRANSMISSION : enable/disable automatic retransmission + - \ref ARM_CAN_SET_TRANSCEIVER_DELAY : set transceiver delay + \param[in] arg Argument of operation + \return \ref execution_status + + \fn ARM_CAN_STATUS ARM_CAN_GetStatus (void) + \brief Get CAN status. + \return CAN status \ref ARM_CAN_STATUS + + \fn void ARM_CAN_SignalUnitEvent (uint32_t event) + \brief Signal CAN unit event. + \param[in] event \ref CAN_unit_events + \return none + + \fn void ARM_CAN_SignalObjectEvent (uint32_t obj_idx, uint32_t event) + \brief Signal CAN object event. + \param[in] obj_idx Object index + \param[in] event \ref CAN_events + \return none +*/ + +typedef void (*ARM_CAN_SignalUnitEvent_t) (uint32_t event); ///< Pointer to \ref ARM_CAN_SignalUnitEvent : Signal CAN Unit Event. +typedef void (*ARM_CAN_SignalObjectEvent_t) (uint32_t obj_idx, uint32_t event); ///< Pointer to \ref ARM_CAN_SignalObjectEvent : Signal CAN Object Event. + + +/** +\brief CAN Device Driver Capabilities. +*/ +typedef struct _ARM_CAN_CAPABILITIES { + uint32_t num_objects : 8; ///< Number of \ref can_objects available + uint32_t reentrant_operation : 1; ///< Support for reentrant calls to \ref ARM_CAN_MessageSend, \ref ARM_CAN_MessageRead, \ref ARM_CAN_ObjectConfigure and abort message sending used by \ref ARM_CAN_Control + uint32_t fd_mode : 1; ///< Support for CAN with flexible data-rate mode (CAN_FD) (set by \ref ARM_CAN_Control) + uint32_t restricted_mode : 1; ///< Support for restricted operation mode (set by \ref ARM_CAN_SetMode) + uint32_t monitor_mode : 1; ///< Support for bus monitoring mode (set by \ref ARM_CAN_SetMode) + uint32_t internal_loopback : 1; ///< Support for internal loopback mode (set by \ref ARM_CAN_SetMode) + uint32_t external_loopback : 1; ///< Support for external loopback mode (set by \ref ARM_CAN_SetMode) +} ARM_CAN_CAPABILITIES; + + +/** +\brief Access structure of the CAN Driver. +*/ +typedef struct _ARM_DRIVER_CAN { + ARM_DRIVER_VERSION (*GetVersion) (void); ///< Pointer to \ref ARM_CAN_GetVersion : Get driver version. + ARM_CAN_CAPABILITIES (*GetCapabilities) (void); ///< Pointer to \ref ARM_CAN_GetCapabilities : Get driver capabilities. + int32_t (*Initialize) (ARM_CAN_SignalUnitEvent_t cb_unit_event, + ARM_CAN_SignalObjectEvent_t cb_object_event); ///< Pointer to \ref ARM_CAN_Initialize : Initialize CAN interface. + int32_t (*Uninitialize) (void); ///< Pointer to \ref ARM_CAN_Uninitialize : De-initialize CAN interface. + int32_t (*PowerControl) (ARM_POWER_STATE state); ///< Pointer to \ref ARM_CAN_PowerControl : Control CAN interface power. + uint32_t (*GetClock) (void); ///< Pointer to \ref ARM_CAN_GetClock : Retrieve CAN base clock frequency. + int32_t (*SetBitrate) (ARM_CAN_BITRATE_SELECT select, + uint32_t bitrate, + uint32_t bit_segments); ///< Pointer to \ref ARM_CAN_SetBitrate : Set bitrate for CAN interface. + int32_t (*SetMode) (ARM_CAN_MODE mode); ///< Pointer to \ref ARM_CAN_SetMode : Set operating mode for CAN interface. + ARM_CAN_OBJ_CAPABILITIES (*ObjectGetCapabilities) (uint32_t obj_idx); ///< Pointer to \ref ARM_CAN_ObjectGetCapabilities : Retrieve capabilities of an object. + int32_t (*ObjectSetFilter) (uint32_t obj_idx, + ARM_CAN_FILTER_OPERATION operation, + uint32_t id, + uint32_t arg); ///< Pointer to \ref ARM_CAN_ObjectSetFilter : Add or remove filter for message reception. + int32_t (*ObjectConfigure) (uint32_t obj_idx, + ARM_CAN_OBJ_CONFIG obj_cfg); ///< Pointer to \ref ARM_CAN_ObjectConfigure : Configure object. + int32_t (*MessageSend) (uint32_t obj_idx, + ARM_CAN_MSG_INFO *msg_info, + const uint8_t *data, + uint8_t size); ///< Pointer to \ref ARM_CAN_MessageSend : Send message on CAN bus. + int32_t (*MessageRead) (uint32_t obj_idx, + ARM_CAN_MSG_INFO *msg_info, + uint8_t *data, + uint8_t size); ///< Pointer to \ref ARM_CAN_MessageRead : Read message received on CAN bus. + int32_t (*Control) (uint32_t control, + uint32_t arg); ///< Pointer to \ref ARM_CAN_Control : Control CAN interface. + ARM_CAN_STATUS (*GetStatus) (void); ///< Pointer to \ref ARM_CAN_GetStatus : Get CAN status. +} const ARM_DRIVER_CAN; + +#endif /* __DRIVER_CAN_H */ |