From 56e86c626df3dbf74c1021210636a7c5d92a49ce Mon Sep 17 00:00:00 2001 From: Dominik Sliwa Date: Tue, 30 Oct 2018 16:31:29 +0100 Subject: move to cmake Signed-off-by: Dominik Sliwa --- drivers/include/fsl_common.h | 348 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 348 insertions(+) create mode 100644 drivers/include/fsl_common.h (limited to 'drivers/include/fsl_common.h') diff --git a/drivers/include/fsl_common.h b/drivers/include/fsl_common.h new file mode 100644 index 0000000..f20c090 --- /dev/null +++ b/drivers/include/fsl_common.h @@ -0,0 +1,348 @@ +/* + * Copyright (c) 2015-2016, Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of the copyright holder nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _FSL_COMMON_H_ +#define _FSL_COMMON_H_ + +#include +#include +#include +#include + +#if defined(__ICCARM__) +#include +#endif + +#include "fsl_device_registers.h" + +/*! + * @addtogroup ksdk_common + * @{ + */ + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! @brief Construct a status code value from a group and code number. */ +#define MAKE_STATUS(group, code) ((((group)*100) + (code))) + +/*! @brief Construct the version number for drivers. */ +#define MAKE_VERSION(major, minor, bugfix) (((major) << 16) | ((minor) << 8) | (bugfix)) + +/* Debug console type definition. */ +#define DEBUG_CONSOLE_DEVICE_TYPE_NONE 0U /*!< No debug console. */ +#define DEBUG_CONSOLE_DEVICE_TYPE_UART 1U /*!< Debug console base on UART. */ +#define DEBUG_CONSOLE_DEVICE_TYPE_LPUART 2U /*!< Debug console base on LPUART. */ +#define DEBUG_CONSOLE_DEVICE_TYPE_LPSCI 3U /*!< Debug console base on LPSCI. */ +#define DEBUG_CONSOLE_DEVICE_TYPE_USBCDC 4U /*!< Debug console base on USBCDC. */ +#define DEBUG_CONSOLE_DEVICE_TYPE_FLEXCOMM 5U /*!< Debug console base on USBCDC. */ +#define DEBUG_CONSOLE_DEVICE_TYPE_IUART 6U /*!< Debug console base on i.MX UART. */ + +/*! @brief Status group numbers. */ +enum _status_groups +{ + kStatusGroup_Generic = 0, /*!< Group number for generic status codes. */ + kStatusGroup_FLASH = 1, /*!< Group number for FLASH status codes. */ + kStatusGroup_LPSPI = 4, /*!< Group number for LPSPI status codes. */ + kStatusGroup_FLEXIO_SPI = 5, /*!< Group number for FLEXIO SPI status codes. */ + kStatusGroup_DSPI = 6, /*!< Group number for DSPI status codes. */ + kStatusGroup_FLEXIO_UART = 7, /*!< Group number for FLEXIO UART status codes. */ + kStatusGroup_FLEXIO_I2C = 8, /*!< Group number for FLEXIO I2C status codes. */ + kStatusGroup_LPI2C = 9, /*!< Group number for LPI2C status codes. */ + kStatusGroup_UART = 10, /*!< Group number for UART status codes. */ + kStatusGroup_I2C = 11, /*!< Group number for UART status codes. */ + kStatusGroup_LPSCI = 12, /*!< Group number for LPSCI status codes. */ + kStatusGroup_LPUART = 13, /*!< Group number for LPUART status codes. */ + kStatusGroup_SPI = 14, /*!< Group number for SPI status code.*/ + kStatusGroup_XRDC = 15, /*!< Group number for XRDC status code.*/ + kStatusGroup_SEMA42 = 16, /*!< Group number for SEMA42 status code.*/ + kStatusGroup_SDHC = 17, /*!< Group number for SDHC status code */ + kStatusGroup_SDMMC = 18, /*!< Group number for SDMMC status code */ + kStatusGroup_SAI = 19, /*!< Group number for SAI status code */ + kStatusGroup_MCG = 20, /*!< Group number for MCG status codes. */ + kStatusGroup_SCG = 21, /*!< Group number for SCG status codes. */ + kStatusGroup_SDSPI = 22, /*!< Group number for SDSPI status codes. */ + kStatusGroup_FLEXIO_I2S = 23, /*!< Group number for FLEXIO I2S status codes */ + kStatusGroup_FLEXIO_MCULCD = 24, /*!< Group number for FLEXIO LCD status codes */ + kStatusGroup_FLASHIAP = 25, /*!< Group number for FLASHIAP status codes */ + kStatusGroup_FLEXCOMM_I2C = 26, /*!< Group number for FLEXCOMM I2C status codes */ + kStatusGroup_I2S = 27, /*!< Group number for I2S status codes */ + kStatusGroup_IUART = 28, /*!< Group number for IUART status codes */ + kStatusGroup_SDRAMC = 35, /*!< Group number for SDRAMC status codes. */ + kStatusGroup_POWER = 39, /*!< Group number for POWER status codes. */ + kStatusGroup_ENET = 40, /*!< Group number for ENET status codes. */ + kStatusGroup_PHY = 41, /*!< Group number for PHY status codes. */ + kStatusGroup_TRGMUX = 42, /*!< Group number for TRGMUX status codes. */ + kStatusGroup_SMARTCARD = 43, /*!< Group number for SMARTCARD status codes. */ + kStatusGroup_LMEM = 44, /*!< Group number for LMEM status codes. */ + kStatusGroup_QSPI = 45, /*!< Group number for QSPI status codes. */ + kStatusGroup_DMA = 50, /*!< Group number for DMA status codes. */ + kStatusGroup_EDMA = 51, /*!< Group number for EDMA status codes. */ + kStatusGroup_DMAMGR = 52, /*!< Group number for DMAMGR status codes. */ + kStatusGroup_FLEXCAN = 53, /*!< Group number for FlexCAN status codes. */ + kStatusGroup_LTC = 54, /*!< Group number for LTC status codes. */ + kStatusGroup_FLEXIO_CAMERA = 55, /*!< Group number for FLEXIO CAMERA status codes. */ + kStatusGroup_LPC_SPI = 56, /*!< Group number for LPC_SPI status codes. */ + kStatusGroup_LPC_USART = 57, /*!< Group number for LPC_USART status codes. */ + kStatusGroup_DMIC = 58, /*!< Group number for DMIC status codes. */ + kStatusGroup_SDIF = 59, /*!< Group number for SDIF status codes.*/ + kStatusGroup_SPIFI = 60, /*!< Group number for SPIFI status codes. */ + kStatusGroup_OTP = 61, /*!< Group number for OTP status codes. */ + kStatusGroup_MCAN = 62, /*!< Group number for MCAN status codes. */ + kStatusGroup_CAAM = 63, /*!< Group number for CAAM status codes. */ + kStatusGroup_ECSPI = 64, /*!< Group number for ECSPI status codes. */ + kStatusGroup_USDHC = 65, /*!< Group number for USDHC status codes.*/ + kStatusGroup_ESAI = 69, /*!< Group number for ESAI status codes. */ + kStatusGroup_FLEXSPI = 70, /*!< Group number for FLEXSPI status codes. */ + kStatusGroup_NOTIFIER = 98, /*!< Group number for NOTIFIER status codes. */ + kStatusGroup_DebugConsole = 99, /*!< Group number for debug console status codes. */ + kStatusGroup_ApplicationRangeStart = 100, /*!< Starting number for application groups. */ +}; + +/*! @brief Generic status return codes. */ +enum _generic_status +{ + kStatus_Success = MAKE_STATUS(kStatusGroup_Generic, 0), + kStatus_Fail = MAKE_STATUS(kStatusGroup_Generic, 1), + kStatus_ReadOnly = MAKE_STATUS(kStatusGroup_Generic, 2), + kStatus_OutOfRange = MAKE_STATUS(kStatusGroup_Generic, 3), + kStatus_InvalidArgument = MAKE_STATUS(kStatusGroup_Generic, 4), + kStatus_Timeout = MAKE_STATUS(kStatusGroup_Generic, 5), + kStatus_NoTransferInProgress = MAKE_STATUS(kStatusGroup_Generic, 6), +}; + +/*! @brief Type used for all status and error return values. */ +typedef int32_t status_t; + +/* + * The fsl_clock.h is included here because it needs MAKE_VERSION/MAKE_STATUS/status_t + * defined in previous of this file. + */ +#include "fsl_clock.h" + +/* + * Chip level peripheral reset API, for MCUs that implement peripheral reset control external to a peripheral + */ +#if ((defined(FSL_FEATURE_SOC_SYSCON_COUNT) && (FSL_FEATURE_SOC_SYSCON_COUNT > 0)) || \ + (defined(FSL_FEATURE_SOC_ASYNC_SYSCON_COUNT) && (FSL_FEATURE_SOC_ASYNC_SYSCON_COUNT > 0))) +#include "fsl_reset.h" +#endif + +/*! @name Min/max macros */ +/* @{ */ +#if !defined(MIN) +#define MIN(a, b) ((a) < (b) ? (a) : (b)) +#endif + +#if !defined(MAX) +#define MAX(a, b) ((a) > (b) ? (a) : (b)) +#endif +/* @} */ + +/*! @brief Computes the number of elements in an array. */ +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +/*! @name UINT16_MAX/UINT32_MAX value */ +/* @{ */ +#if !defined(UINT16_MAX) +#define UINT16_MAX ((uint16_t)-1) +#endif + +#if !defined(UINT32_MAX) +#define UINT32_MAX ((uint32_t)-1) +#endif +/* @} */ + +/*! @name Timer utilities */ +/* @{ */ +/*! Macro to convert a microsecond period to raw count value */ +#define USEC_TO_COUNT(us, clockFreqInHz) (uint64_t)((uint64_t)us * clockFreqInHz / 1000000U) +/*! Macro to convert a raw count value to microsecond */ +#define COUNT_TO_USEC(count, clockFreqInHz) (uint64_t)((uint64_t)count * 1000000U / clockFreqInHz) + +/*! Macro to convert a millisecond period to raw count value */ +#define MSEC_TO_COUNT(ms, clockFreqInHz) (uint64_t)((uint64_t)ms * clockFreqInHz / 1000U) +/*! Macro to convert a raw count value to millisecond */ +#define COUNT_TO_MSEC(count, clockFreqInHz) (uint64_t)((uint64_t)count * 1000U / clockFreqInHz) +/* @} */ + +/******************************************************************************* + * API + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Enable specific interrupt. + * + * Enable the interrupt not routed from intmux. + * + * @param interrupt The IRQ number. + */ +static inline void EnableIRQ(IRQn_Type interrupt) +{ + if (NotAvail_IRQn == interrupt) + { + return; + } + +#if defined(FSL_FEATURE_SOC_INTMUX_COUNT) && (FSL_FEATURE_SOC_INTMUX_COUNT > 0) + if (interrupt < FSL_FEATURE_INTMUX_IRQ_START_INDEX) +#endif + { +#if defined(__GIC_PRIO_BITS) + GIC_EnableIRQ(interrupt); +#else + NVIC_EnableIRQ(interrupt); +#endif + } +} + +/*! + * @brief Disable specific interrupt. + * + * Disable the interrupt not routed from intmux. + * + * @param interrupt The IRQ number. + */ +static inline void DisableIRQ(IRQn_Type interrupt) +{ + if (NotAvail_IRQn == interrupt) + { + return; + } + +#if defined(FSL_FEATURE_SOC_INTMUX_COUNT) && (FSL_FEATURE_SOC_INTMUX_COUNT > 0) + if (interrupt < FSL_FEATURE_INTMUX_IRQ_START_INDEX) +#endif + { +#if defined(__GIC_PRIO_BITS) + GIC_DisableIRQ(interrupt); +#else + NVIC_DisableIRQ(interrupt); +#endif + } +} + +/*! + * @brief Disable the global IRQ + * + * Disable the global interrupt and return the current primask register. User is required to provided the primask + * register for the EnableGlobalIRQ(). + * + * @return Current primask value. + */ +static inline uint32_t DisableGlobalIRQ(void) +{ +#if defined(CPSR_I_Msk) + uint32_t cpsr = __get_CPSR() & CPSR_I_Msk; + + __disable_irq(); + + return cpsr; +#else + uint32_t regPrimask = __get_PRIMASK(); + + __disable_irq(); + + return regPrimask; +#endif +} + +/*! + * @brief Enaable the global IRQ + * + * Set the primask register with the provided primask value but not just enable the primask. The idea is for the + * convinience of integration of RTOS. some RTOS get its own management mechanism of primask. User is required to + * use the EnableGlobalIRQ() and DisableGlobalIRQ() in pair. + * + * @param primask value of primask register to be restored. The primask value is supposed to be provided by the + * DisableGlobalIRQ(). + */ +static inline void EnableGlobalIRQ(uint32_t primask) +{ +#if defined(CPSR_I_Msk) + __set_CPSR((__get_CPSR() & ~CPSR_I_Msk) | primask); +#else + __set_PRIMASK(primask); +#endif +} + +/*! + * @brief install IRQ handler + * + * @param irq IRQ number + * @param irqHandler IRQ handler address + * @return The old IRQ handler address + */ +uint32_t InstallIRQHandler(IRQn_Type irq, uint32_t irqHandler); + +#if (defined(FSL_FEATURE_SOC_SYSCON_COUNT) && (FSL_FEATURE_SOC_SYSCON_COUNT > 0)) +/*! + * @brief Enable specific interrupt for wake-up from deep-sleep mode. + * + * Enable the interrupt for wake-up from deep sleep mode. + * Some interrupts are typically used in sleep mode only and will not occur during + * deep-sleep mode because relevant clocks are stopped. However, it is possible to enable + * those clocks (significantly increasing power consumption in the reduced power mode), + * making these wake-ups possible. + * + * @note This function also enables the interrupt in the NVIC (EnableIRQ() is called internally). + * + * @param interrupt The IRQ number. + */ +void EnableDeepSleepIRQ(IRQn_Type interrupt); + +/*! + * @brief Disable specific interrupt for wake-up from deep-sleep mode. + * + * Disable the interrupt for wake-up from deep sleep mode. + * Some interrupts are typically used in sleep mode only and will not occur during + * deep-sleep mode because relevant clocks are stopped. However, it is possible to enable + * those clocks (significantly increasing power consumption in the reduced power mode), + * making these wake-ups possible. + * + * @note This function also disables the interrupt in the NVIC (DisableIRQ() is called internally). + * + * @param interrupt The IRQ number. + */ +void DisableDeepSleepIRQ(IRQn_Type interrupt); +#endif /* FSL_FEATURE_SOC_SYSCON_COUNT */ + +#if defined(__cplusplus) +} +#endif + +/*! @} */ + +#endif /* _FSL_COMMON_H_ */ -- cgit v1.2.3