/*
 * Copyright (c) 2015, Freescale Semiconductor, Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * o Redistributions of source code must retain the above copyright notice, this list
 *   of conditions and the following disclaimer.
 *
 * o Redistributions in binary form must reproduce the above copyright notice, this
 *   list of conditions and the following disclaimer in the documentation and/or
 *   other materials provided with the distribution.
 *
 * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
 *   contributors may be used to endorse or promote products derived from this
 *   software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
#ifndef _FSL_SAI_EDMA_H_
#define _FSL_SAI_EDMA_H_

#include "fsl_sai.h"
#include "fsl_edma.h"

/*!
 * @addtogroup sai_edma
 * @{
 */


/*******************************************************************************
 * Definitions
 ******************************************************************************/

typedef struct _sai_edma_handle sai_edma_handle_t;

/*! @brief SAI eDMA transfer callback function for finish and error */
typedef void (*sai_edma_callback_t)(I2S_Type *base, sai_edma_handle_t *handle, status_t status, void *userData);

/*! @brief SAI DMA transfer handle, users should not touch the content of the handle.*/
struct _sai_edma_handle
{
    edma_handle_t *dmaHandle;                     /*!< DMA handler for SAI send */
    uint8_t bytesPerFrame;                        /*!< Bytes in a frame */
    uint8_t channel;                              /*!< Which data channel */
    uint8_t count;                                /*!< The transfer data count in a DMA request */
    uint32_t state;                               /*!< Internal state for SAI eDMA transfer */
    sai_edma_callback_t callback;                 /*!< Callback for users while transfer finish or error occurs */
    void *userData;                               /*!< User callback parameter */
    edma_tcd_t tcd[SAI_XFER_QUEUE_SIZE + 1U];     /*!< TCD pool for eDMA transfer. */
    sai_transfer_t saiQueue[SAI_XFER_QUEUE_SIZE]; /*!< Transfer queue storing queued transfer. */
    size_t transferSize[SAI_XFER_QUEUE_SIZE];     /*!< Data bytes need to transfer */
    volatile uint8_t queueUser;                   /*!< Index for user to queue transfer. */
    volatile uint8_t queueDriver;                 /*!< Index for driver to get the transfer data and size */
};

/*******************************************************************************
 * APIs
 ******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif

/*!
 * @name eDMA Transactional
 * @{
 */

/*!
 * @brief Initializes the SAI eDMA handle.
 *
 * This function initializes the SAI master DMA handle, which can be used for other SAI master transactional APIs.
 * Usually, for a specified SAI instance, call this API once to get the initialized handle.
 *
 * @param base SAI base pointer.
 * @param handle SAI eDMA handle pointer.
 * @param base SAI peripheral base address.
 * @param callback Pointer to user callback function.
 * @param userData User parameter passed to the callback function.
 * @param dmaHandle eDMA handle pointer, this handle shall be static allocated by users.
 */
void SAI_TransferTxCreateHandleEDMA(
    I2S_Type *base, sai_edma_handle_t *handle, sai_edma_callback_t callback, void *userData, edma_handle_t *dmaHandle);

/*!
 * @brief Initializes the SAI Rx eDMA handle.
 *
 * This function initializes the SAI slave DMA handle, which can be used for other SAI master transactional APIs.
 * Usually, for a specified SAI instance, call this API once to get the initialized handle.
 *
 * @param base SAI base pointer.
 * @param handle SAI eDMA handle pointer.
 * @param base SAI peripheral base address.
 * @param callback Pointer to user callback function.
 * @param userData User parameter passed to the callback function.
 * @param dmaHandle eDMA handle pointer, this handle shall be static allocated by users.
 */
void SAI_TransferRxCreateHandleEDMA(
    I2S_Type *base, sai_edma_handle_t *handle, sai_edma_callback_t callback, void *userData, edma_handle_t *dmaHandle);

/*!
 * @brief Configures the SAI Tx audio format.
 *
 * The audio format can be changed at run-time. This function configures the sample rate and audio data
 * format to be transferred. This function also sets the eDMA parameter according to formatting requirements.
 *
 * @param base SAI base pointer.
 * @param handle SAI eDMA handle pointer.
 * @param format Pointer to SAI audio data format structure.
 * @param mclkSourceClockHz SAI master clock source frequency in Hz.
 * @param bclkSourceClockHz SAI bit clock source frequency in Hz. If bit clock source is master
 * clock, this value should equals to masterClockHz in format.
 * @retval kStatus_Success Audio format set successfully.
 * @retval kStatus_InvalidArgument The input argument is invalid.
*/
void SAI_TransferTxSetFormatEDMA(I2S_Type *base,
                                 sai_edma_handle_t *handle,
                                 sai_transfer_format_t *format,
                                 uint32_t mclkSourceClockHz,
                                 uint32_t bclkSourceClockHz);

/*!
 * @brief Configures the SAI Rx audio format.
 *
 * The audio format can be changed at run-time. This function configures the sample rate and audio data
 * format to be transferred. This function also sets the eDMA parameter according to formatting requirements.
 *
 * @param base SAI base pointer.
 * @param handle SAI eDMA handle pointer.
 * @param format Pointer to SAI audio data format structure.
 * @param mclkSourceClockHz SAI master clock source frequency in Hz.
 * @param bclkSourceClockHz SAI bit clock source frequency in Hz. If a bit clock source is the master
 * clock, this value should equal to masterClockHz in format.
 * @retval kStatus_Success Audio format set successfully.
 * @retval kStatus_InvalidArgument The input argument is invalid.
*/
void SAI_TransferRxSetFormatEDMA(I2S_Type *base,
                                 sai_edma_handle_t *handle,
                                 sai_transfer_format_t *format,
                                 uint32_t mclkSourceClockHz,
                                 uint32_t bclkSourceClockHz);

/*!
 * @brief Performs a non-blocking SAI transfer using DMA.
 *
 * @note This interface returns immediately after the transfer initiates. Call
 * SAI_GetTransferStatus to poll the transfer status and check whether the SAI transfer is finished.
 *
 * @param base SAI base pointer.
 * @param handle SAI eDMA handle pointer.
 * @param xfer Pointer to the DMA transfer structure.
 * @retval kStatus_Success Start a SAI eDMA send successfully.
 * @retval kStatus_InvalidArgument The input argument is invalid.
 * @retval kStatus_TxBusy SAI is busy sending data.
 */
status_t SAI_TransferSendEDMA(I2S_Type *base, sai_edma_handle_t *handle, sai_transfer_t *xfer);

/*!
 * @brief Performs a non-blocking SAI receive using eDMA.
 *
 * @note This interface returns immediately after the transfer initiates. Call
 * the SAI_GetReceiveRemainingBytes to poll the transfer status and check whether the SAI transfer is finished.
 *
 * @param base SAI base pointer
 * @param handle SAI eDMA handle pointer.
 * @param xfer Pointer to DMA transfer structure.
 * @retval kStatus_Success Start a SAI eDMA receive successfully.
 * @retval kStatus_InvalidArgument The input argument is invalid.
 * @retval kStatus_RxBusy SAI is busy receiving data.
 */
status_t SAI_TransferReceiveEDMA(I2S_Type *base, sai_edma_handle_t *handle, sai_transfer_t *xfer);

/*!
 * @brief Aborts a SAI transfer using eDMA.
 *
 * @param base SAI base pointer.
 * @param handle SAI eDMA handle pointer.
 */
void SAI_TransferAbortSendEDMA(I2S_Type *base, sai_edma_handle_t *handle);

/*!
 * @brief Aborts a SAI receive using eDMA.
 *
 * @param base SAI base pointer
 * @param handle SAI eDMA handle pointer.
 */
void SAI_TransferAbortReceiveEDMA(I2S_Type *base, sai_edma_handle_t *handle);

/*!
 * @brief Gets byte count sent by SAI.
 *
 * @param base SAI base pointer.
 * @param handle SAI eDMA handle pointer.
 * @param count Bytes count sent by SAI.
 * @retval kStatus_Success Succeed get the transfer count.
 * @retval kStatus_NoTransferInProgress There is no non-blocking transaction in progress.
 */
status_t SAI_TransferGetSendCountEDMA(I2S_Type *base, sai_edma_handle_t *handle, size_t *count);

/*!
 * @brief Gets byte count received by SAI.
 *
 * @param base SAI base pointer
 * @param handle SAI eDMA handle pointer.
 * @param count Bytes count received by SAI.
 * @retval kStatus_Success Succeed get the transfer count.
 * @retval kStatus_NoTransferInProgress There is no non-blocking transaction in progress.
 */
status_t SAI_TransferGetReceiveCountEDMA(I2S_Type *base, sai_edma_handle_t *handle, size_t *count);

/*! @} */

#if defined(__cplusplus)
}
#endif

/*!
 * @}
 */
#endif