doc: Reformat platform port documents

The platform port documents are not very standardised right now and
they don't integrate properly into the document tree so:

1) Make sure each port has a proper name and title (incl. owner)
2) Correct use of headings, subheadings, etc in each port
3) Resolve any naming conflicts between documents

Change-Id: I4c2da6f57172b7f2af3512e766ae9ce3b840b50f
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

1 files changed, 35 insertions, 0 deletions

diff --git a/docs/plat/xilinx-versal.rst b/docs/plat/xilinx-versal.rst
new file mode 100644
index 00000000..231286e7
--- /dev/null
+++ b/docs/plat/xilinx-versal.rst
@@ -0,0 +1,35 @@
+Xilinx Versal
+=============
+
+Trusted Firmware-A implements the EL3 firmware layer for Xilinx Versal.
+The platform only uses the runtime part of TF-A as Xilinx Versal already has a
+BootROM (BL1) and PMC FW (BL2).
+
+BL31 is TF-A.
+BL32 is an optional Secure Payload.
+BL33 is the non-secure world software (U-Boot, Linux etc).
+
+To build:
+```bash
+make RESET_TO_BL31=1 CROSS_COMPILE=aarch64-none-elf- PLAT=versal bl31
+```
+
+To build ATF for different platform (for now its just versal virtual "versal_virt")
+```bash
+make RESET_TO_BL31=1 CROSS_COMPILE=aarch64-none-elf- PLAT=versal VERSAL_PLATFORM=versal_virt bl31
+```
+
+Xilinx Versal platform specific build options
+---------------------------------------------
+
+*   `VERSAL_ATF_MEM_BASE`: Specifies the base address of the bl31 binary.
+*   `VERSAL_ATF_MEM_SIZE`: Specifies the size of the memory region of the bl31 binary.
+*   `VERSAL_BL32_MEM_BASE`: Specifies the base address of the bl32 binary.
+*   `VERSAL_BL32_MEM_SIZE`: Specifies the size of the memory region of the bl32 binary.
+
+*   `VERSAL_CONSOLE`: Select the console driver. Options:
+    -   `pl011`, `pl011_0`: ARM pl011 UART 0
+    -   `pl011_1`         : ARM pl011 UART 1
+
+*   `VERSAL_PLATFORM`: Select the platform. Options:
+    -   `versal_virt`	: Versal Virtual platform