diff options
Diffstat (limited to 'plat/imx/imx8mq/imx8mq_bl31_setup.c')
-rw-r--r-- | plat/imx/imx8mq/imx8mq_bl31_setup.c | 309 |
1 files changed, 309 insertions, 0 deletions
diff --git a/plat/imx/imx8mq/imx8mq_bl31_setup.c b/plat/imx/imx8mq/imx8mq_bl31_setup.c new file mode 100644 index 00000000..5bea5c0f --- /dev/null +++ b/plat/imx/imx8mq/imx8mq_bl31_setup.c @@ -0,0 +1,309 @@ +/* + * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. + * Copyright 2017 NXP + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <arch_helpers.h> +#include <assert.h> +#include <bl_common.h> +#include <console.h> +#include <context.h> +#include <context_mgmt.h> +#include <debug.h> +#include <stdbool.h> +#include <mmio.h> +#include <platform.h> +#include <platform_def.h> +#include <plat_imx8.h> +#include <xlat_tables.h> +#include <soc.h> +#include <tzc380.h> +#include <imx_csu.h> +#include <imx_rdc.h> + +/* linker defined symbols */ +#if USE_COHERENT_MEM +#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__) +#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__) +#endif + +#define BL31_RO_BASE (unsigned long)(&__RO_START__) +#define BL31_RO_LIMIT (unsigned long)(&__RO_END__) +#define BL31_END (unsigned long)(&__BL31_END__) + +#define CAAM_BASE (0x30900000) /* HW address*/ + +#define JR0_BASE (CAAM_BASE + 0x1000) + +#define CAAM_JR0MID (0x30900010) +#define CAAM_JR1MID (0x30900018) +#define CAAM_JR2MID (0x30900020) +#define CAAM_NS_MID (0x1) + +#define SM_P0_PERM (JR0_BASE + 0xa04) +#define SM_P0_SMAG2 (JR0_BASE + 0xa08) +#define SM_P0_SMAG1 (JR0_BASE + 0xa0c) +#define SM_CMD (JR0_BASE + 0xbe4) + +/* secure memory command */ +#define SMC_PAGE_SHIFT 16 +#define SMC_PART_SHIFT 8 + +#define SMC_CMD_ALLOC_PAGE 0x01 /* allocate page to this partition */ +#define SMC_CMD_DEALLOC_PART 0x03 /* deallocate partition */ + +static entry_point_info_t bl32_image_ep_info; +static entry_point_info_t bl33_image_ep_info; + +/* get SPSR for BL33 entry */ +static uint32_t get_spsr_for_bl33_entry(void) +{ + unsigned long el_status; + unsigned long mode; + uint32_t spsr; + + /* figure out what mode we enter the non-secure world */ + el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT; + el_status &= ID_AA64PFR0_ELX_MASK; + + mode = (el_status) ? MODE_EL2 : MODE_EL1; + + spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS); + return spsr; +} + +#define SCTR_BASE_ADDR 0x306c0000 +#define CNTFID0_OFF 0x20 +#define CNTFID1_OFF 0x24 + +#define SC_CNTCR_ENABLE (1 << 0) +#define SC_CNTCR_HDBG (1 << 1) +#define SC_CNTCR_FREQ0 (1 << 8) +#define SC_CNTCR_FREQ1 (1 << 9) + +#define GPR_TZASC_EN (1 << 0) +#define GPR_TZASC_EN_LOCK (1 << 16) +unsigned int freq; + +void system_counter_init(void) +{ + int val; + + /* Update with accurate clock frequency */ + freq = mmio_read_32(SCTR_BASE_ADDR + CNTFID0_OFF); + + val = mmio_read_32(SCTR_BASE_ADDR + CNTCR_OFF); + val &= ~(SC_CNTCR_FREQ0 | SC_CNTCR_FREQ1); + val |= SC_CNTCR_FREQ0 | SC_CNTCR_ENABLE | SC_CNTCR_HDBG; + mmio_write_32(SCTR_BASE_ADDR + CNTCR_OFF, val); +} + +void bl31_tzc380_setup(void) +{ + unsigned int val; + + val = mmio_read_32(IMX_IOMUX_GPR_BASE + 0x28); + if ((val & GPR_TZASC_EN) != GPR_TZASC_EN) + return; + + NOTICE("Configureing TZASC380\n"); + + tzc380_init(IMX_TZASC_BASE); + + /* + * Need to substact offset 0x40000000 from CPU address when + * programming tzasc region for i.mx8mq. + */ + + /* Enable 1G-5G S/NS RW */ + tzc380_configure_region(0, 0x00000000, TZC_ATTR_REGION_SIZE(TZC_REGION_SIZE_4G) | TZC_ATTR_REGION_EN_MASK | TZC_ATTR_SP_ALL); + + tzc380_dump_state(); +} + +void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1, + u_register_t arg2, u_register_t arg3) +{ + uint32_t sm_cmd; +#if !defined (CSU_RDC_TEST) + int i; + /* enable CSU NS access permission */ + for (i = 0; i < 64; i++) { + mmio_write_32(0x303e0000 + i * 4, 0xffffffff); + } +#endif + + /* Dealloc part 0 and 2 with current DID */ + sm_cmd = (0 << SMC_PART_SHIFT | SMC_CMD_DEALLOC_PART); + mmio_write_32(SM_CMD, sm_cmd); + + sm_cmd = (2 << SMC_PART_SHIFT | SMC_CMD_DEALLOC_PART); + mmio_write_32(SM_CMD, sm_cmd); + + /* config CAAM JRaMID set MID to Cortex A */ + mmio_write_32(CAAM_JR0MID, CAAM_NS_MID); + mmio_write_32(CAAM_JR1MID, CAAM_NS_MID); + mmio_write_32(CAAM_JR2MID, CAAM_NS_MID); + + /* config the AIPSTZ1 */ + mmio_write_32(0x301f0000, 0x77777777); + mmio_write_32(0x301f0004, 0x77777777); + mmio_write_32(0x301f0040, 0x0); + mmio_write_32(0x301f0044, 0x0); + mmio_write_32(0x301f0048, 0x0); + mmio_write_32(0x301f004c, 0x0); + mmio_write_32(0x301f0050, 0x0); + + /* config the AIPSTZ2 */ + mmio_write_32(0x305f0000, 0x77777777); + mmio_write_32(0x305f0004, 0x77777777); + mmio_write_32(0x305f0040, 0x0); + mmio_write_32(0x305f0044, 0x0); + mmio_write_32(0x305f0048, 0x0); + mmio_write_32(0x305f004c, 0x0); + mmio_write_32(0x305f0050, 0x0); + + /* config the AIPSTZ3 */ + mmio_write_32(0x309f0000, 0x77777777); + mmio_write_32(0x309f0004, 0x77777777); + mmio_write_32(0x309f0040, 0x0); + mmio_write_32(0x309f0044, 0x0); + mmio_write_32(0x309f0048, 0x0); + mmio_write_32(0x309f004c, 0x0); + mmio_write_32(0x309f0050, 0x0); + + /* config the AIPSTZ4 */ + mmio_write_32(0x32df0000, 0x77777777); + mmio_write_32(0x32df0004, 0x77777777); + mmio_write_32(0x32df0040, 0x0); + mmio_write_32(0x32df0044, 0x0); + mmio_write_32(0x32df0048, 0x0); + mmio_write_32(0x32df004c, 0x0); + mmio_write_32(0x32df0050, 0x0); + +#if DEBUG_CONSOLE + console_init(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ, + IMX_CONSOLE_BAUDRATE); +#endif + /* enable the system counter */ + system_counter_init(); + + /* Alloc partition 0 writing SMPO and SMAGs */ + mmio_write_32(SM_P0_PERM, 0xff); + mmio_write_32(SM_P0_SMAG2, 0xffffffff); + mmio_write_32(SM_P0_SMAG1, 0xffffffff); + + /* Allocate page 0 and 1 to partition 0 with DID set */ + sm_cmd = (0 << SMC_PAGE_SHIFT + | 0 << SMC_PART_SHIFT + | SMC_CMD_ALLOC_PAGE); + mmio_write_32(SM_CMD, sm_cmd); + + sm_cmd = (1 << SMC_PAGE_SHIFT + | 0 << SMC_PART_SHIFT + | SMC_CMD_ALLOC_PAGE); + mmio_write_32(SM_CMD, sm_cmd); + + /* + * tell BL3-1 where the non-secure software image is located + * and the entry state information. + */ + bl33_image_ep_info.pc = PLAT_NS_IMAGE_OFFSET; + bl33_image_ep_info.spsr = get_spsr_for_bl33_entry(); + SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE); + +#ifdef TEE_IMX8 + /* Populate entry point information for BL32 */ + SET_PARAM_HEAD(&bl32_image_ep_info, PARAM_EP, VERSION_1, 0); + SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE); + bl32_image_ep_info.pc = BL32_BASE; + bl32_image_ep_info.spsr = 0; + /* Pass TEE base and size to uboot */ + bl33_image_ep_info.args.arg1 = 0xFE000000; + bl33_image_ep_info.args.arg2 = 0x2000000; +#endif + bl31_tzc380_setup(); + +#if defined (CSU_RDC_TEST) + csu_test(); + rdc_test(); +#endif +} + +void bl31_plat_arch_setup(void) +{ + /* add the mmap */ + mmap_add_region(0x900000, 0x900000, 0x20000, + MT_MEMORY | MT_RW); + mmap_add_region(0x100000, 0x100000, 0x10000, + MT_MEMORY | MT_RW); + + mmap_add_region(0x180000, 0x180000, 0x8000, + MT_MEMORY | MT_RW); + + mmap_add_region(0x40000000, 0x40000000, 0xc0000000, + MT_MEMORY | MT_RW | MT_NS); + + mmap_add_region(BL31_BASE, BL31_BASE, BL31_RO_LIMIT - BL31_RO_BASE, + MT_MEMORY | MT_RO); + mmap_add_region(IMX_ROM_BASE, IMX_ROM_BASE, + 0x20000, MT_MEMORY | MT_RO); + /* Map GPV */ + mmap_add_region(0x32000000, 0x32000000, 0x800000, MT_DEVICE | MT_RW); + /* Map AIPS */ + mmap_add_region(IMX_AIPS_BASE, IMX_AIPS_BASE, IMX_AIPS_SIZE, MT_DEVICE | MT_RW); + + /* Map GIC */ + mmap_add_region(0x38800000, 0x38800000, 0x200000, + MT_DEVICE | MT_RW); + + /* Map DDRC/PHY/PERF */ + mmap_add_region(0x3c000000, 0x3c000000, 0xC000000, MT_DEVICE | MT_RW); + +#if USE_COHERENT_MEM + mmap_add_region(BL31_COHERENT_RAM_BASE, BL31_COHERENT_RAM_BASE, + BL31_COHERENT_RAM_LIMIT - BL31_COHERENT_RAM_BASE, + MT_DEVICE | MT_RW); +#endif + + /* setup xlat table */ + init_xlat_tables(); + + /* enable the MMU */ + enable_mmu_el3(0); +} + +void bl31_platform_setup(void) +{ + /* init the GICv3 cpu and distributor interface */ + plat_gic_driver_init(); + plat_gic_init(); + + /* gpc init */ + imx_gpc_init(); + + /* switch DDR frequency to 3200 mts */ + lpddr4_switch_to_3200(); +} + +entry_point_info_t *bl31_plat_get_next_image_ep_info(unsigned int type) +{ + if (type == NON_SECURE) + return &bl33_image_ep_info; + if (type == SECURE) + return &bl32_image_ep_info; + + return NULL; +} + +unsigned int plat_get_syscnt_freq2(void) +{ + return freq; +} + +void bl31_plat_runtime_setup(void) +{ + return; +} |