summaryrefslogtreecommitdiff
path: root/drivers/arm/gic/v3/gicv3_private.h
AgeCommit message (Collapse)Author
2018-07-05Fix MISRA Rule 5.1Daniel Boulby
Rule 5.1: External identifiers shall be distinct Some of the identifier names in the GICv3 driver were so long that the first 31 characters were identical. This patch shortens these names to make sure they are different. Fixed for: LOG_LEVEL=50 PLAT=fvp Change-Id: Iecd551e3a015d144716b87b42c83dd3ab8c34d90 Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
2018-02-28Fix MISRA rule 8.4 Part 1Roberto Vargas
Rule 8.4: A compatible declaration shall be visible when an object or function with external linkage is defined Fixed for: make DEBUG=1 PLAT=fvp LOG_LEVEL=50 all Change-Id: I7c2ad3f5c015411c202605851240d5347e4cc8c7 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2017-11-13GIC: Fix Group 0 enablingJeenu Viswambharan
At present, the GIC drivers enable Group 0 interrupts only if there are Secure SPIs listed in the interrupt properties/list. This means that, even if there are Group 0 SGIs/PPIs configured, the group remained disabled in the absence of a Group 0 SPI. Modify both GICv2 and GICv3 SGI/PPI configuration to enable Group 0 when corresponding SGIs/PPIs are present. Change-Id: Id123e8aaee0c22b476eebe3800340906d83bbc6d Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
2017-10-16GIC: Allow specifying interrupt propertiesJeenu Viswambharan
The GIC driver initialization currently allows an array of interrupts to be configured as secure. Future use cases would require more interrupt configuration other than just security, such as priority. This patch introduces a new interrupt property array as part of both GICv2 and GICv3 driver data. The platform can populate the array with interrupt numbers and respective properties. The corresponding driver initialization iterates through the array, and applies interrupt configuration as required. This capability, and the current way of supplying array (or arrays, in case of GICv3) of secure interrupts, are however mutually exclusive. Henceforth, the platform should supply either: - A list of interrupts to be mapped as secure (the current way). Platforms that do this will continue working as they were. With this patch, this scheme is deprecated. - A list of interrupt properties (properties include interrupt group). Individual interrupt properties are specified via. descriptors of type 'interrupt_prop_desc_t', which can be populated with the macro INTR_PROP_DESC(). A run time assert checks that the platform doesn't specify both. Henceforth the old scheme of providing list of secure interrupts is deprecated. When built with ERROR_DEPRECATED=1, GIC drivers will require that the interrupt properties are supplied instead of an array of secure interrupts. Add a section to firmware design about configuring secure interrupts. Fixes ARM-software/tf-issues#262 Change-Id: I8eec29e72eb69dbb6bce77879febf32c95376942 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
2017-10-16GIC: Add API to set/clear interrupt pendingJeenu Viswambharan
API documentation updated. Change-Id: I14e33cfc7dfa93257c82d76fae186b17a1b6d266 Co-authored-by: Yousuf A <yousuf.sait@arm.com> Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
2017-10-16GIC: Add APIs to enable and disable interruptJeenu Viswambharan
API documentation updated. Change-Id: Ice7511f8df5356851001d2f7dc2a46cfe318f9ba Co-authored-by: Yousuf A <yousuf.sait@arm.com> Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
2017-10-16GIC: Add API to get interrupt active statusJeenu Viswambharan
API documentation updated. Change-Id: I6d61785af0d5330930c709de971a904dc7c3516c Co-authored-by: Yousuf A <yousuf.sait@arm.com> Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
2017-10-05GICv3: ITS architectural save and restore helpersSoby Mathew
This patch adds functions to save and restore GICv3 ITS registers during system suspend. Please note that the power management of GIC ITS is implementation defined. These functions only implements the architectural part of the ITS power management and they do not restore memory structures or register content required to support ITS. Even if the ITS implementation stores structures in memory, an implementation defined power down sequence is likely to be required to flush some internal ITS caches to memory. If such implementation defined sequence is not followed, the platform must ensure that the ITS is not power gated during system suspend. Change-Id: I5f31e5541975aa7dcaab69b0b7f67583c0e27678 Signed-off-by: Soby Mathew <soby.mathew@arm.com> Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
2017-10-05GICv3: add functions for save and restoreSoby Mathew
During system suspend, the GICv3 Distributor and Redistributor context can be lost due to power gating of the system power domain. This means that the GICv3 context needs to be saved prior to system suspend and restored on wakeup. Currently the consensus is that the Firmware should be in charge of this. See tf-issues#464 for more details. This patch introduces helper APIs in the GICv3 driver to save and restore the Distributor and Redistributor contexts. The GICv3 ITS context is not considered in this patch because the specification says that the details of ITS power management is implementation-defined. These APIs are expected to be appropriately invoked by the platform layer during system suspend. Fixes ARM-software/tf-issues#464 Change-Id: Iebb9c6770ab8c4d522546f161fa402d2fe02ec00 Signed-off-by: Soby Mathew <soby.mathew@arm.com> Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
2017-10-05GICv3: turn some macros into inline functionsDouglas Raillard
Tidy up the code a bit by turning some macros into inline functions which allows to remove the do/while(0) idiom and backslashes at the end of the line. Change-Id: Ie41a4ea4a4da507f7b925247b53e85019101d717 Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
2017-06-01Introduce ARM GIC-600 driverJeenu Viswambharan
ARM GIC-600 IP complies with ARM GICv3 architecture, but among others, implements a power control register in the Redistributor frame. This register must be programmed to mark the frame as powered on, before accessing other registers in the frame. Rest of initialization sequence remains the same. The driver provides APIs for Redistributor power management, and overrides those in the generic GICv3 driver. The driver data is shared between generic GICv3 driver and that of GIC-600. For FVP platform, the GIC-600 driver is chosen when FVP_USE_GIC_DRIVER is set to FVP_GIC600. Also update user guide. Change-Id: I321b2360728d69f6d4b0a747b2cfcc3fe5a20d67 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
2017-05-03Use SPDX license identifiersdp-arm
To make software license auditing simpler, use SPDX[0] license identifiers instead of duplicating the license text in every file. NOTE: Files that have been imported by FreeBSD have not been modified. [0]: https://spdx.org/ Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
2016-08-10AArch32: Enable GIC and TZC supportSoby Mathew
This patch modifies GICv3 and TZC drivers to add AArch32 support. No modifications are required for the GICv2 driver for AArch32 support. The TZC driver assumes that the secure world is running in Little-Endian mode to do 64 bit manipulations. Assertions are present to validate the assumption. Note: The legacy GICv3 driver is not supported for AArch32. Change-Id: Id1bc75a9f5dafb9715c9500ca77b4606eb1e2458
2016-07-27GICv3: Fix the GICD_IROUTER offsetSoby Mathew
This patch fixes the offset of GICD_IROUTER register defined in gicv3.h. Although the GICv3 documention mentions that the offset for this register is 0x6100-0x7FD8, the offset calculation for an interrupt id `n` is : 0x6000 + 8n, where n >= 32 This requires the offset for GICD_IROUTER to be defined as 0x6000. Fixes ARM-software/tf-issues#410 Change-Id: If9e91e30d946afe7f1f60fea4f065c7567093fa8
2016-02-09Move private APIs in gic_common.h to a private headerSoby Mathew
This patch moves the private GIC common accessors from `gic_common.h` to a new private header file `gic_common_private.h`. This patch also adds additional comments to GIC register accessors to highlight the fact that some of them access register values that correspond to multiple interrupt IDs. The convention used is that the `set`, `get` and `clr` accessors access and modify the values corresponding to a single interrupt ID whereas the `read` and `write` GIC register accessors access the raw GIC registers and it could correspond to multiple interrupt IDs depending on the register accessed. Change-Id: I2643ecb2533f01e3d3219fcedfb5f80c120622f9
2015-11-26Add ARM GICv3 driver without support for legacy operationAchin Gupta
This patch adds a driver for ARM GICv3 systems that need to run software stacks where affinity routing is enabled across all privileged exception levels for both security states. This driver is a partial implementation of the ARM Generic Interrupt Controller Architecture Specification, GIC architecture version 3.0 and version 4.0 (ARM IHI 0069A). The driver does not cater for legacy support of interrupts and asymmetric configurations. The existing GIC driver has been preserved unchanged. The common code for GICv2 and GICv3 systems has been refactored into a new file, `drivers/arm/gic/common/gic_common.c`. The corresponding header is in `include/drivers/arm/gic_common.h`. The driver interface is implemented in `drivers/arm/gic/v3/gicv3_main.c`. The corresponding header is in `include/drivers/arm/gicv3.h`. Helper functions are implemented in `drivers/arm/gic/v3/arm_gicv3_helpers.c` and are accessible through the `drivers/arm/gic/v3/gicv3_private.h` header. Change-Id: I8c3c834a1d049d05b776b4dcb76b18ccb927444a
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-28 02:57:33 +0000