linux-toradex.git, branch PD13.2.1 Linux kernel for Apalis and Colibri modules phyFLEX-i.MX6: remove fac hibernate 2013-11-07T17:19:37+00:00 Christian Hemp c.hemp@phytec.de 2013-09-03T18:35:38+00:00 0f2ee3494a3d8d3bc78166a9641a5ab0a31f225f It is not working correct Signed-off-by: Christian Hemp <c.hemp@phytec.de> 
It is not working correct

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
phyFLEX-i.MX6: Add memory selection for GPU 2013-11-07T17:19:37+00:00 Christian Hemp c.hemp@phytec.de 2013-09-03T12:03:16+00:00 6beed48f7bedeb31954dbbcc80cdd9e755d023ab To allocate memory for the GPU we need the RAM size. We can choose the ramsize over the Kernelkonfig. Signed-off-by: Christian Hemp <c.hemp@phytec.de> 
To allocate memory for the GPU we need the RAM size.
We can choose the ramsize over the Kernelkonfig.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
drivers:regulator da9063 reset volates on reboot 2013-11-07T17:19:37+00:00 Christian Hemp c.hemp@phytec.de 2013-09-03T08:10:10+00:00 5748721b79a5c56b40a489422e954c1b09936ddc The PMIC DA9063 has no reset. We need to reset the voltages themselves on reboot. Signed-off-by: Christian Hemp <c.hemp@phytec.de> 
The PMIC DA9063 has no reset. We need to reset the voltages
themselves on reboot.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
phyFLEX-i.MX6: Add selection for prime output 2013-11-07T17:19:37+00:00 Christian Hemp c.hemp@phytec.de 2013-08-27T17:09:17+00:00 5d4ace7119b2382b17f9eaff8fc89a22aafd6aee Signed-off-by: Christian Hemp <c.hemp@phytec.de> 
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
imx6: pfla02: change display eeprom address 2013-11-07T17:19:37+00:00 Christian Hemp c.hemp@phytec.de 2013-08-27T10:27:40+00:00 712fe6f031cdb75582867205218686310ca522e6 Change display eeprom address to 0x50, which is default. Signed-off-by: Christian Hemp <c.hemp@phytec.de> 
Change display eeprom address to 0x50, which is default.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
HDMI: Allow non CEA standard 2013-11-07T17:19:36+00:00 Christian Hemp c.hemp@phytec.de 2013-05-06T13:54:43+00:00 88e02a0a701a26058de30d109eca1e41f0a907dd Don't filter mode get from EDID. The filter was added with this patch: ENGR00180117 HDMI: No audio output in 1080P on some TV Some TV support specific video mode that different with CEA standard, and it's pixel clock not comply CEA standard. But audio configuration paramter N and CTS should follow CEA standard. So audio may not work in these specific video mode. Filter video mode get from EDID, only keep standard CEA video mode in the modelist. Signed-off-by: Christian Hemp <c.hemp@phytec.de> 
Don't filter mode get from EDID.

The filter was added with this patch:
ENGR00180117 HDMI: No audio output in 1080P on some TV

    Some TV support specific video mode that different with
    CEA standard, and it's pixel clock not comply CEA standard.
    But audio configuration paramter N and CTS should follow CEA standard.
    So audio may not work in these specific video mode.
    Filter video mode get from EDID, only keep standard CEA video mode
    in the modelist.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
ethernet: set phy id correct 2013-11-07T17:19:36+00:00 Christian Hemp c.hemp@phytec.de 2013-08-26T08:16:55+00:00 96e1e344bc34d71f027a4ef845d00255eae7bfe9 Set the correct phyID for Micrel KSZ9031 Signed-off-by: Christian Hemp <c.hemp@phytec.de> 
Set the correct phyID for Micrel KSZ9031

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
imx6: phyFLEX: update gpu name 2013-11-07T17:19:36+00:00 Christian Hemp c.hemp@phytec.de 2013-08-21T08:21:30+00:00 df8ea09db9dc5cc31bdfde91d6f89b759ba48cc0 Signed-off-by: Christian Hemp <c.hemp@phytec.de> 
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
imx6: phyFLEX: Add cmic wake pin for rev 2 2013-11-07T17:19:36+00:00 Christian Hemp c.hemp@phytec.de 2013-08-21T08:19:24+00:00 2025936df7ca7e5e1a2591302123710a6c6db172 Signed-off-by: Christian Hemp <c.hemp@phytec.de> 
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
phyflex:imx6: Add delay for RX lines 2013-11-07T17:19:36+00:00 Christian Hemp c.hemp@phytec.de 2013-08-13T12:37:39+00:00 2cd7f1ecd019438897e6baf149ca1c1242bfd83b For the DL we need a delay on the RX lines. Without the delay we loos all packages. Signed-off-by: Christian Hemp <c.hemp@phytec.de> 
For the DL we need a delay on the RX lines. Without the delay
we loos all packages.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>