linux-toradex.git, branch T30_LinuxImageV2.0Beta2_20130626

Merge branch 'colibri' of git.toradex.com:linux-toradex into colibri

2013-06-24T12:36:07+00:00

colibri_t30: set local critical temperatur to 95°C

2013-06-24T12:34:51+00:00

If the local critical temperature is reached the power is
unconditionally switched off. At 70°C ambient the default of 85°C
can be reached. So increase the limit in the hwmon chip to 95°C.

apalis_t30: set local critical temperatur to 95°C

2013-06-24T12:31:02+00:00

If the local critical temperature is reached the power is
unconditionally switched off. At 70°C ambient the default of 85°C
can be reached. So increase the limit in the hwmon chip to 95°C.

alsa: hda: silence extensive HDMI HDA audio messages

2013-06-24T12:29:32+00:00

Avoid extensive HDMI messages during boot.

[   30.234829] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=0
[   30.253652] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[   32.333657] HDMI: detected monitor SyncMaster at connection type HDMI
[   32.340116] HDMI: available speakers: FL/FR
[   32.344616] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24

hwmon: lm95245: add local critical shutdown temp hook

2013-06-24T12:26:51+00:00

export access to the 'Local Shared OS and T_Crit Limit'
register.

video: tegra: fb: apalis/colibri_t30: hack avoid 24 Hz mode

2013-06-24T12:16:50+00:00

Hack to avoid 24 Hz mode in X resulting in no display at all. This has
been encountered using e.g. a Samsung SyncMaster F2380 if connected by
HDMI.

root@apalis-t30:~# xrandr
Screen 0: minimum 256 x 128, current 1920 x 1080, maximum 2048 x 2048
LVDS-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1920x1080      58.6*+
HDMI-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 160mm x 90mm
   1920x1080      60.0 +   24.0*
   1680x1050      59.9
   1280x1024      75.0     60.0
   1440x900       75.0     59.9
   1280x960       60.0
   1280x800       59.9
   1152x864       75.0
   1280x720       60.0     50.0
   1024x768       75.0     70.1     60.0
   832x624        74.6
   800x600        72.2     75.0     60.3     56.2
   720x576        50.0
   720x480        59.9
   640x480        75.0     72.8     66.7     59.9
   720x400        70.1

apalis_t30: fix PCIe by forcing GEN1 speed

2013-06-21T09:50:01+00:00

Enable PCI quirk support resp. don't explicitly disable it in order for
the following fix to take effect.

The Apalis evaluation board needs to set the link speed to 2.5 GT/s
(GEN1). The default link speed setting is 5 GT/s (GEN2). 0x98 is the
Link Control 2 PCIe Capability Register of the PEX8605 PCIe switch. The
switch supports link speed auto negotiation, but falsely sets the link
speed to 5 GT/s.

media: adv7180: add 48-lead and 32-lead device identification

2013-06-17T15:18:14+00:00

Previously only 64-lead and 40-lead models were identified. This patch
adds 48-lead and 32-lead device identification as well.

Please note that due to missing parameter negotiation functions one
might get the following message with a subsequent crash:

WARNING: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
not get parameters on device '/dev/video0'

This can be avoided by explicitly specifying the format as follows:

gst-launch v4l2src ! deinterlace tff=1 method=4 ! 'video/x-raw-yuv,
width=(int)720, height=(int)576, format=(fourcc)I420' !
nv_omx_videomixer ! nv_gl_eglimagesink

apalis_t30: v4l2: adv7180 and max9526 integration

2013-06-12T19:43:55+00:00

Integrate ADV7180 and MAX9526 video decoder support and prepare for
drivers as modules.

The following gstreamer pipeline shows a preview window:

gst-launch v4l2src ! deinterlace tff=1 method=4 ! nv_omx_videomixer !
nv_gl_eglimagesink

tegra_v4l2: support for interlaced fields

2013-06-12T19:43:55+00:00