linux-toradex.git, branch imx-android-r12

touchscreen: temp disable eGalax touchscreen suspend function

2011-09-07T03:24:18+00:00

the touchscreen chip can't be wake up during resume.
it caused by the irq pin can't pull down while resume.
this is may caused by 6q cpu board HW design.

temp disable suspend function of eGalax touch screen for release.

Signed-off-by: Zhang Jiejing

config: change mx6 defconfig to 1g/3g address partition

2011-09-02T08:30:05+00:00

change back to 1g/3g address partition, give more vma to user space.

Signed-off-by: Zhang Jiejing

cpu hotplug: remove the printk to avoid unknow crash

2011-08-25T06:17:59+00:00

It will happen to crash on cpu hotplug.

Signed-off-by: Xinyu Chen

mx6q: increase the dma zone size to 184MB

2011-08-24T08:57:19+00:00

Signed-off-by: Xinyu Chen

Add HDMI support into the defconfig

2011-08-23T05:39:10+00:00

Signed-off-by: Xinyu Chen

Revert "ENGR00154922 [MX6]Disable some clocks during boot"

2011-08-18T02:23:12+00:00

This reverts commit 187111c874936a35e8d5004db9537d2760f2bae1.

Merge branch 'imx_2.6.38' into imx_2.6.38_android

2011-08-18T02:19:32+00:00

ENGR00154961 [MX6]system hang in suspend with irq

2011-08-17T11:42:49+00:00

If the wakeup source irq pending during suspend process, system will
hang, we need to abort suspend, and resume immediately to make system
running normally.

Signed-off-by: Anson Huang

ENGR00153887 mx53 ard: add display support

2011-08-17T08:53:13+00:00

- Add VGA support. The command option to use VGA as primary
  display: video=mxcfb0:dev=vga,VGA-XGA,if=GBR24 ard-vga
  For VGA, Need to disable Ethernet and short PIN 1-2 of J14
  and J16.
- Add LVDS support. The default display is LVDS0. LVDS1 needs
  further modification on ldb driver

Signed-off-by: Lily Zhang

ENGR00154931 [MX6]L2 cache init wrong after resume

2011-08-17T06:42:11+00:00

1.Need to add condition check after resum, or if we
didn't config L2 cache, build will fail.
2.Need to call the mxc_init_l2x0 instead of l2x0_init.

Signed-off-by: Anson Huang