linux-toradex.git, branch imx-dt-3.19 Linux kernel for Apalis and Colibri modules ARM: dts: imx6: add pm_power_off support for i.mx6 chips 2014-11-19T03:59:38+00:00 Robin Gong b38343@freescale.com 2014-11-12T08:20:37+00:00 c95e259674da685152eb093263478c7ada0aa904 All chips of i.mx6 can be powered off by programming SNVS. For example : On i.mx6q-sabresd board, PMIC_ON_REQ connect with external pmic ON/OFF pin, that will cause the whole PMIC powered off except VSNVS. And system can restart once PMIC_ON_REQ goes high by push POWRER key. Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
All chips of i.mx6 can be powered off by programming SNVS.
For example :
On i.mx6q-sabresd board, PMIC_ON_REQ connect with external
pmic ON/OFF pin, that will cause the whole PMIC powered off
except VSNVS. And system can restart once PMIC_ON_REQ goes
high by push POWRER key.

Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
ARM: dts: vf-colibri: add USB regulators 2014-11-19T03:59:37+00:00 Stefan Agner stefan@agner.ch 2014-11-16T18:00:28+00:00 d6e9f15540c7347081ec520d54ba768de6f81f8d Add structure of USB supply logic. The USB hosts power enable regulator is needed to control VBUS supply on the Colibri carrier board. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
Add structure of USB supply logic. The USB hosts power enable
regulator is needed to control VBUS supply on the Colibri carrier
board.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
ARM: dts: imx6: phyFLEX: Add CAN support 2014-11-19T03:59:31+00:00 Christian Hemp c.hemp@phytec.de 2014-11-14T13:32:26+00:00 8c63cb33686c99ba32b5a9c2e627491b047248fe Add CAN support for Phytec phyFLEX-i.MX6 (PFL-A-02 and PBA-B-01). Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
Add CAN support for Phytec phyFLEX-i.MX6 (PFL-A-02 and PBA-B-01).

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
ARM: dts: imx6: phyFLEX: Add PCIe 2014-11-19T03:59:24+00:00 Christian Hemp c.hemp@phytec.de 2014-11-14T13:32:25+00:00 60b9a273ce782e74a3b1ac27961da37874048bea Add PCIe support for Phytec phyFLEX-i.MX6 (PFL-A-02 and PBA-B-01). Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
Add PCIe support for Phytec phyFLEX-i.MX6 (PFL-A-02 and PBA-B-01).

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic 2014-11-19T03:59:16+00:00 Christian Hemp c.hemp@phytec.de 2014-11-14T13:32:24+00:00 7ce1f5a9e752d8af11b833c2cc40ed43a93e230c The PMIC interrupt was changed from modul revision 1 to 2. Revision 1 was declared as a prototype and is not in series by any customers. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
The PMIC interrupt was changed from modul revision 1 to 2. Revision 1 was
declared as a prototype and is not in series by any customers.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
ARM: dts: imx6: phyFLEX: Enable gpmi in module file 2014-11-19T03:59:06+00:00 Christian Hemp c.hemp@phytec.de 2014-11-14T13:32:23+00:00 1f79f3662b4e72c09e4ae4db97d592cc460e3310 The nand is on the module (PFL-A-02) and not on the baseboard (PBA-B-01). Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
The nand is on the module (PFL-A-02) and not on the baseboard (PBA-B-01).

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
ARM: dts: imx6: phyFLEX: set nodes in alphabetical order 2014-11-19T03:58:46+00:00 Christian Hemp c.hemp@phytec.de 2014-11-14T13:32:22+00:00 e18c9f022839a12c9f83438ff5faaa4ce3a896c9 The gmpi and fec node were not in alphabatical order. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
The gmpi and fec node were not in alphabatical order.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC 2014-11-19T03:57:44+00:00 Bhuvanchandra DV bhuvanchandra.dv@toradex.com 2014-11-13T04:35:32+00:00 4d22b9b0f1036c3e10dee2566982f1533f976b4f ST-M41T0M6 is available on Colibri carrier boards. Hence enable M41T0M6 RTC. Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
ST-M41T0M6 is available on Colibri carrier boards.
Hence enable M41T0M6 RTC.

Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
ARM: dts: vf-colibri: Add I2C support 2014-11-19T03:57:44+00:00 Bhuvanchandra DV bhuvanchandra.dv@toradex.com 2014-11-13T04:35:31+00:00 730d29a8f8b3376c18fa7dae347da6ef2299051d Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
ARM: dts: imx6qdl: Enable CODA960 VPU 2014-11-19T03:57:44+00:00 Philipp Zabel p.zabel@pengutronix.de 2014-11-11T21:12:47+00:00 eba85629ea37cf102f0ca7a091b19d09425cd4e4 This patch adds links to the on-chip SRAM and reset controller nodes and switches the interrupts. Make the BIT processor interrupt, which exists on all variants, the first one. The JPEG unit interrupt, which does not exist on i.MX27 and i.MX5 thus is an optional second interrupt. Use different compatible strings for i.MX6Q/D and i.MX6S/DL, as they have to load separate firmware images for some reason. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
This patch adds links to the on-chip SRAM and reset controller nodes
and switches the interrupts. Make the BIT processor interrupt, which exists on
all variants, the first one. The JPEG unit interrupt, which does not exist on
i.MX27 and i.MX5 thus is an optional second interrupt.
Use different compatible strings for i.MX6Q/D and i.MX6S/DL, as they have to
load separate firmware images for some reason.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>