linux-toradex.git, branch v2.6.21-rc1

Linux 2.6.21-rc1

2007-02-21T04:32:30+00:00

[PATCH] i810fb: fix i810_check_params section mismatch

2007-02-21T01:10:16+00:00

WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference
to .init.data: from .text between 'i810_check_params' (at offset
0x1123) and 'encode_fix'

yres cannot be declared __devinitdata as it is used in
i810_check_params(), which isn't __devinit.

Signed-off-by: Jean Delvare 
Acked-by: James Simmons 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] fb: SM501 framebuffer driver

2007-02-21T01:10:16+00:00

Driver for the Silicon Motion SM501 multifunction device framebuffer
subsystem.

This driver supports both the CRT and LCD panel heads, with some simple
acceleration for the cursor plotting and support for screen panning.  There
is no current support for bitblt/drawing engines, which should be added at
a later date.

This has been tested on a number of configurations, including PCI and
generic-bus, on PPC, ARM and SH4

[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Ben Dooks 
Signed-off-by: Vincent Sanders 
Acked-by: James Simmons 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] GPIO API: SA1100 wrapper cleanup

2007-02-21T01:10:16+00:00

Based on the discussion last december (http://lkml.org/lkml/2006/12/20/241),
this patch
  - adds gpio_direction_input/output functions to
    generic.c instead of making them inline,
  - fixes comment and includes and uses inline functions
    instead of macros in gpio.h

Signed-off-by: Philipp Zabel 
Signed-off-by: David Brownell 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] GPIO API: S3C2410 wrapper cleanup

2007-02-21T01:10:16+00:00

this one adds an #include .
Tested by Roman Moravcik on s3c2440.

Based on the discussion last december
(http://lkml.org/lkml/2006/12/20/243), this patch
 - fixes comment and includes in gpio.h
 - adds the gpio_to_irq definition for S3C2400
 - includes asm/arch/regs-gpio.h for pin direction
   definitions

Signed-off-by: Philipp Zabel 
Signed-off-by: David Brownell 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] spi_s3c2410_gpio.c spi mode 2 and 3 support

2007-02-21T01:10:16+00:00

Add transfer modes 2 and 3 to the S3C24XX gpio SPI driver

Signed-off-by: Harald Welte 
Signed-off-by: Ben Dooks 
Signed-off-by: David Brownell 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] SPI controller build/warning fixes

2007-02-21T01:10:16+00:00

The signature of the per-device cleanup() routine changed to remove its
const-ness.  Three new SPI controller drivers now need that change, to
eliminate build warnings.

This also fixes a build bug with atmel_spi on AT91 systems.

Signed-off-by: David Brownell 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] parport_pc: fix parport_pc_probe_port section warning

2007-02-21T01:10:16+00:00

WARNING: drivers/parport/parport_pc.o - Section mismatch: reference
to .init.text: from .text between 'parport_pc_probe_port' (at offset
0x14f7) and 'parport_pc_unregister_port'

parport_dma_probe() cannot be declared __devinit as it is called
from parport_pc_probe_port() which isn't.

Signed-off-by: Jean Delvare 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] lockdep: annotate BLKPG_DEL_PARTITION

2007-02-21T01:10:16+00:00

>=============================================
>[ INFO: possible recursive locking detected ]
>2.6.19-1.2909.fc7 #1
>---------------------------------------------
>anaconda/587 is trying to acquire lock:
> (&bdev->bd_mutex){--..}, at: [] mutex_lock+0x21/0x24
>
>but task is already holding lock:
> (&bdev->bd_mutex){--..}, at: [] mutex_lock+0x21/0x24
>
>other info that might help us debug this:
>1 lock held by anaconda/587:
> #0:  (&bdev->bd_mutex){--..}, at: [] mutex_lock+0x21/0x24
>
>stack backtrace:
> [] show_trace_log_lvl+0x1a/0x2f
> [] show_trace+0x12/0x14
> [] dump_stack+0x16/0x18
> [] __lock_acquire+0x116/0xa09
> [] lock_acquire+0x56/0x6f
> [] __mutex_lock_slowpath+0xe5/0x24a
> [] mutex_lock+0x21/0x24
> [] blkdev_ioctl+0x600/0x76d
> [] block_ioctl+0x1b/0x1f
> [] do_ioctl+0x22/0x68
> [] vfs_ioctl+0x252/0x265
> [] sys_ioctl+0x49/0x63
> [] syscall_call+0x7/0xb

Annotate BLKPG_DEL_PARTITION's bd_mutex locking and add a little comment
clarifying the bd_mutex locking, because I confused myself and initially
thought the lock order was wrong too.

Signed-off-by: Peter Zijlstra 
Cc: Neil Brown 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] drivers/isdn/gigaset/: build asyncdata.o into the gigaset module

2007-02-21T01:10:16+00:00

  LD      drivers/isdn/gigaset/built-in.o
drivers/isdn/gigaset/ser_gigaset.o: In function `gigaset_m10x_send_skb':
(.text+0xe50): multiple definition of `gigaset_m10x_send_skb'
drivers/isdn/gigaset/usb_gigaset.o:(.text+0x0): first defined here
drivers/isdn/gigaset/ser_gigaset.o: In function `gigaset_m10x_input':
(.text+0x1121): multiple definition of `gigaset_m10x_input'
drivers/isdn/gigaset/usb_gigaset.o:(.text+0x2d1): first defined here
make[4]: *** [drivers/isdn/gigaset/built-in.o] Error 1

Signed-off-by: Adrian Bunk 
Cc: Tilman Schmidt 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds