commit 5ba2f67afb02c5302b2898949ed6fc3b3d37dcf1 upstream NULL function pointers are very bad security wise. This one got caught by kerneloops.org quite a few times, so it's happening in the field.... Fix is simple, check the function pointer for NULL, like 6 other places in the same function are already doing. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9754a5b840a209bc1f192d59f63e81b698a55ac8 upstream improve the debug printout: - make it actually display something - print it only once would be nice to have a WARN_ONCE() facility, to feed such things to kerneloops.org. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: S.Çağlar Onur <caglar@pardus.org.tr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 4b40893918203ee1a1f6a114316c2a19c072e9bd upstream Olaf Kirch noticed that the i915_set_status_page() function of the i915 kernel driver calls ioremap with an address offset that is supplied by userspace via ioctl. The function zeroes the mapped memory via memset and tells the hardware about the address. Turns out that access to that ioctl is not restricted to root so users could probably exploit that to do nasty things. We haven't tried to write actual exploit code though. It only affects the Intel G33 series and newer. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
(cherry picked from commit a30ee3c747728f9151664118ffcbdeefd202c332) The zr36067 driver is improperly declaring pixel format RGBP twice, once as "16-bit RGB LE" and once as "16-bit RGB BE". The latter is actually RGBR. Fix the code to properly map both pixel formats. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
cherry picked from commit c37396c19403e249f12626187d51e92c915f2bc9 Fix the following crash in the bttv driver: BUG: unable to handle kernel NULL pointer dereference at 000000000000036c IP: [<ffffffffa037860a>] radio_open+0x3a/0x170 [bttv] This happens because radio_open assumes that all present bttv devices have a radio function. If a bttv device without radio and one with radio are installed on the same system, and the one without radio is registered first, then radio_open checks for the radio device number of a bttv device that has no radio function, and this breaks. All we have to do to fix it is to skip bttv devices without a radio function. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit efc968d450e013049a662d22727cf132618dcb2f upstream This is debatable, but while we're debating it, let's disallow the combination of splice and an O_APPEND destination. It's not entirely clear what the semantics of O_APPEND should be, and POSIX apparently expects pwrite() to ignore O_APPEND, for example. So we could make up any semantics we want, including the old ones. But Miklos convinced me that we should at least give it some thought, and that accepting writes at arbitrary offsets is wrong at least for IS_APPEND() files (which always have O_APPEND set, even if the reverse isn't true: you can obviously have O_APPEND set on a regular file). So disallow O_APPEND entirely for now. I doubt anybody cares, and this way we have one less gray area to worry about. Reported-and-argued-for-by: Miklos Szeredi <miklos@szeredi.hu> Acked-by: Jens Axboe <ens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
based on commit 98dd22c3e086d76058083432d4d8fb85f04bab90 upstream On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan, but to something else. One user has reported instant system power-off when changing the PWM2 duty cycle, so we disable it. I use the board name string as the trigger in case the same board is ever used in other systems. This closes lm-sensors ticket #2349: pwmconfig causes a hard poweroff http://www.lm-sensors.org/ticket/2349 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 232fb69a53a5ec3f22a8104d447abe4806848a8f upstream echo 3 >> /sys/class/graphics/fbcon/rotate_all, then switch to another console. Result: BUG: unable to handle kernel paging request at ffffc20005d00000 IP: [bitfill_aligned+149/265] bitfill_aligned+0x95/0x109 PGD 7e228067 PUD 7e229067 PMD 7bc1f067 PTE 0 Oops: 0002 [1] SMP CPU 1 Modules linked in: [...a lot...] Pid: 10, comm: events/1 Not tainted 2.6.26.5-45.fc9.x86_64 #1 RIP: 0010:[bitfill_aligned+149/265] [bitfill_aligned+149/265] bitfill_aligned+0x95/0x109 RSP: 0018:ffff81007d811bc8 EFLAGS: 00010216 RAX: ffffc20005d00000 RBX: 0000000000000000 RCX: 0000000000000400 RDX: 0000000000000000 RSI: ffffc20005d00000 RDI: ffffffffffffffff RBP: ffff81007d811be0 R08: 0000000000000400 R09: 0000000000000040 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000010000 R13: ffffffff811632f0 R14: 0000000000000006 R15: ffff81007cb85400 FS: 0000000000000000(0000) GS:ffff81007e004780(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: ffffc20005d00000 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process events/1 (pid: 10, threadinfo ffff81007d810000, task ffff81007d808000) Stack: ffff81007c9d75a0 0000000000000000 0000000000000000 ffff81007d811c80 ffffffff81163a61 ffff810000000000 ffffffff8115f9c8 0000001000000000 0000000100aaaaaa 000000007cd0d4a0 fffffd8a00000800 0001000000000000 Call Trace: [cfb_fillrect+523/798] cfb_fillrect+0x20b/0x31e [soft_cursor+416/436] ? soft_cursor+0x1a0/0x1b4 [ccw_clear_margins+205/263] ccw_clear_margins+0xcd/0x107 [fbcon_clear_margins+59/61] fbcon_clear_margins+0x3b/0x3d [fbcon_switch+1291/1466] fbcon_switch+0x50b/0x5ba [redraw_screen+261/481] redraw_screen+0x105/0x1e1 [ccw_cursor+0/1869] ? ccw_cursor+0x0/0x74d [complete_change_console+48/190] complete_change_console+0x30/0xbe [change_console+115/120] change_console+0x73/0x78 [console_callback+0/292] ? console_callback+0x0/0x124 [console_callback+97/292] console_callback+0x61/0x124 [schedule_delayed_work+25/30] ? schedule_delayed_work+0x19/0x1e [run_workqueue+139/282] run_workqueue+0x8b/0x11a [worker_thread+221/238] worker_thread+0xdd/0xee [autoremove_wake_function+0/56] ? autoremove_wake_function+0x0/0x38 [worker_thread+0/238] ? worker_thread+0x0/0xee [kthread+73/118] kthread+0x49/0x76 [child_rip+10/18] child_rip+0xa/0x12 [kthread+0/118] ? kthread+0x0/0x76 [child_rip+0/18] ? child_rip+0x0/0x12 Because fbcon_set_all_vcs()->FBCON_SWAP() uses display->rotate == 0 instead of fbcon_ops->rotate, and vc_resize() has no effect because it is called with new_cols/rows == ->vc_cols/rows. Tested on 2.6.26.5-45.fc9.x86_64, but http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git seems to have the same problem. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c6a2afdacccd56cc0be8e9a7977f0ed1509069f6 upstream Date: Sat, 6 Sep 2008 16:51:22 -0500 Subject: b43legacy: Fix failure in rate-adjustment mechanism A coding error present since b43legacy was incorporated into the kernel has prevented the driver from using the rate-setting mechanism of mac80211. The driver has been forced to remain at a 1 Mb/s rate. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>