linux-toradex.git, branch v4.4.78

Linux 4.4.78

2017-07-21T05:45:10+00:00

kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS

2017-07-21T05:45:00+00:00

commit 691bd4340bef49cf7e5855d06cf24444b5bf2d85 upstream.

It's easier for host applications, such as QEMU, if they can always
access guest MSR_IA32_BNDCFGS in VMCS, even though MPX is disabled in
guest cpuid.

Signed-off-by: Haozhong Zhang 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

kvm: vmx: Check value written to IA32_BNDCFGS

2017-07-21T05:44:59+00:00

commit 4531662d1abf6c1f0e5c2b86ddb60e61509786c8 upstream.

Bits 11:2 must be zero and the linear addess in bits 63:12 must be
canonical. Otherwise, WRMSR(BNDCFGS) should raise #GP.

Fixes: 0dd376e709975779 ("KVM: x86: add MSR_IA32_BNDCFGS to msrs_to_save")
Signed-off-by: Jim Mattson 
Signed-off-by: Radim Krčmář 
Signed-off-by: Greg Kroah-Hartman

kvm: x86: Guest BNDCFGS requires guest MPX support

2017-07-21T05:44:59+00:00

commit 4439af9f911ae0243ffe4e2dfc12bace49605d8b upstream.

The BNDCFGS MSR should only be exposed to the guest if the guest
supports MPX. (cf. the TSC_AUX MSR and RDTSCP.)

Fixes: 0dd376e709975779 ("KVM: x86: add MSR_IA32_BNDCFGS to msrs_to_save")
Change-Id: I3ad7c01bda616715137ceac878f3fa7e66b6b387
Signed-off-by: Jim Mattson 
Signed-off-by: Radim Krčmář 
Signed-off-by: Greg Kroah-Hartman

kvm: vmx: Do not disable intercepts for BNDCFGS

2017-07-21T05:44:59+00:00

commit a8b6fda38f80e75afa3b125c9e7f2550b579454b upstream.

The MSR permission bitmaps are shared by all VMs. However, some VMs
may not be configured to support MPX, even when the host does. If the
host supports VMX and the guest does not, we should intercept accesses
to the BNDCFGS MSR, so that we can synthesize a #GP
fault. Furthermore, if the host does not support MPX and the
"ignore_msrs" kvm kernel parameter is set, then we should intercept
accesses to the BNDCFGS MSR, so that we can skip over the rdmsr/wrmsr
without raising a #GP fault.

Fixes: da8999d31818fdc8 ("KVM: x86: Intel MPX vmx and msr handle")
Signed-off-by: Jim Mattson 
Signed-off-by: Radim Krčmář 
Signed-off-by: Greg Kroah-Hartman

KVM: x86: disable MPX if host did not enable MPX XSAVE features

2017-07-21T05:44:59+00:00

commit a87036add09283e6c4f4103a15c596c67b86ab86 upstream.

When eager FPU is disabled, KVM will still see the MPX bit in CPUID and
presumably the MPX vmentry and vmexit controls.  However, it will not
be able to expose the MPX XSAVE features to the guest, because the guest's
accessible XSAVE features are always a subset of host_xcr0.

In this case, we should disable the MPX CPUID bit, the BNDCFGS MSR,
and the MPX vmentry and vmexit controls for nested virtualization.
It is then unnecessary to enable guest eager FPU if the guest has the
MPX CPUID bit set.

Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results

2017-07-21T05:44:59+00:00

commit c59f29cb144a6a0dfac16ede9dc8eafc02dc56ca upstream.

The 's' flag is supposed to indicate that a softirq is running. This
can be detected by testing the preempt_count with SOFTIRQ_OFFSET.

The current code tests the preempt_count with SOFTIRQ_MASK, which
would be true even when softirqs are disabled but not serving a
softirq.

Link: http://lkml.kernel.org/r/1481300417-3564-1-git-send-email-pkondeti@codeaurora.org

Signed-off-by: Pavankumar Kondeti 
Signed-off-by: Steven Rostedt 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

PM / QoS: return -EINVAL for bogus strings

2017-07-21T05:44:59+00:00

commit 2ca30331c156ca9e97643ad05dd8930b8fe78b01 upstream.

In the current code, if the user accidentally writes a bogus command to
this sysfs file, then we set the latency tolerance to an uninitialized
variable.

Fixes: 2d984ad132a8 (PM / QoS: Introcuce latency tolerance device PM QoS type)
Signed-off-by: Dan Carpenter 
Acked-by: Pavel Machek 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

PM / wakeirq: Convert to SRCU

2017-07-21T05:44:59+00:00

commit ea0212f40c6bc0594c8eff79266759e3ecd4bacc upstream.

The wakeirq infrastructure uses RCU to protect the list of wakeirqs. That
breaks the irq bus locking infrastructure, which is allows sleeping
functions to be called so interrupt controllers behind slow busses,
e.g. i2c, can be handled.

The wakeirq functions hold rcu_read_lock and call into irq functions, which
in case of interrupts using the irq bus locking will trigger a
might_sleep() splat.

Convert the wakeirq infrastructure to Sleepable RCU and unbreak it.

Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling)
Reported-by: Brian Norris 
Suggested-by: Paul E. McKenney 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Paul E. McKenney 
Tested-by: Tony Lindgren 
Tested-by: Brian Norris 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

sched/topology: Optimize build_group_mask()

2017-07-21T05:44:59+00:00

commit f32d782e31bf079f600dcec126ed117b0577e85c upstream.

The group mask is always used in intersection with the group CPUs. So,
when building the group mask, we don't have to care about CPUs that are
not part of the group.

Signed-off-by: Lauro Ramos Venancio 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: lwang@redhat.com
Cc: riel@redhat.com
Link: http://lkml.kernel.org/r/1492717903-5195-2-git-send-email-lvenanci@redhat.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman