linux-toradex.git, branch v4.9.97

Linux 4.9.97

2018-04-29T09:32:03+00:00

ACPI / video: Only default only_lcd to true on Win8-ready _desktops_

2018-04-29T09:32:03+00:00

commit 53fa1f6e8a5958da698a31edf366ffe90596b490 upstream.

Commit 5928c281524f (ACPI / video: Default lcd_only to true on Win8-ready
and newer machines) made only_lcd default to true on all machines where
acpi_osi_is_win8() returns true, including laptops.

The purpose of this is to avoid the bogus / non-working acpi backlight
interface which many newer BIOS-es define on desktop machines.

But this is causing a regression on some laptops, specifically on the
Dell XPS 13 2013 model, which does not have the LCD flag set for its
fully functional ACPI backlight interface.

Rather then DMI quirking our way out of this, this commits changes the
logic for setting only_lcd to true, to only do this on machines with
a desktop (or server) dmi chassis-type.

Note that we cannot simply only check the chassis-type and not register
the backlight interface based on that as there are some laptops and
tablets which have their chassis-type set to "3" aka desktop. Hopefully
the combination of checking the LCD flag, but only on devices with
a desktop(ish) chassis-type will avoid the needs for DMI quirks for this,
or at least limit the amount of DMI quirks which we need to a minimum.

Fixes: 5928c281524f (ACPI / video: Default lcd_only to true on Win8-ready and newer machines)
Reported-and-tested-by: James Hogan 
Signed-off-by: Hans de Goede 
Cc: 4.15+  # 4.15+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

s390/uprobes: implement arch_uretprobe_is_alive()

2018-04-29T09:32:03+00:00

commit 783c3b53b9506db3e05daacfe34e0287eebb09d8 upstream.

Implement s390 specific arch_uretprobe_is_alive() to avoid SIGSEGVs
observed with uretprobes in combination with setjmp/longjmp.

See commit 2dea1d9c38e4 ("powerpc/uprobes: Implement
arch_uretprobe_is_alive()") for more details.

With this implemented all test cases referenced in the above commit
pass.

Reported-by: Ziqian SUN 
Cc:  # v4.3+
Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

s390/dasd: fix IO error for newly defined devices

2018-04-29T09:32:02+00:00

commit 5d27a2bf6e14f5c7d1033ad1e993fcd0eba43e83 upstream.

When a new CKD storage volume is defined at the storage server, Linux
may be relying on outdated information about that volume, which leads to
the following errors:

1. Command Reject Errors for minidisk on z/VM:

dasd-eckd.b3193d: 0.0.XXXX: An error occurred in the DASD device driver,
		  reason=09
dasd(eckd): I/O status report for device 0.0.XXXX:
dasd(eckd): in req: 00000000XXXXXXXX CC:00 FC:04 AC:00 SC:17 DS:02 CS:00
	    RC:0
dasd(eckd): device 0.0.2046: Failing CCW: 00000000XXXXXXXX
dasd(eckd): Sense(hex)  0- 7: 80 00 00 00 00 00 00 00
dasd(eckd): Sense(hex)  8-15: 00 00 00 00 00 00 00 00
dasd(eckd): Sense(hex) 16-23: 00 00 00 00 e1 00 0f 00
dasd(eckd): Sense(hex) 24-31: 00 00 40 e2 00 00 00 00
dasd(eckd): 24 Byte: 0 MSG 0, no MSGb to SYSOP

2. Equipment Check errors on LPAR or for dedicated devices on z/VM:

dasd(eckd): I/O status report for device 0.0.XXXX:
dasd(eckd): in req: 00000000XXXXXXXX CC:00 FC:04 AC:00 SC:17 DS:0E CS:40
	    fcxs:01 schxs:00 RC:0
dasd(eckd): device 0.0.9713: Failing TCW: 00000000XXXXXXXX
dasd(eckd): Sense(hex)  0- 7: 10 00 00 00 13 58 4d 0f
dasd(eckd): Sense(hex)  8-15: 67 00 00 00 00 00 00 04
dasd(eckd): Sense(hex) 16-23: e5 18 05 33 97 01 0f 0f
dasd(eckd): Sense(hex) 24-31: 00 00 40 e2 00 04 58 0d
dasd(eckd): 24 Byte: 0 MSG f, no MSGb to SYSOP

Fix this problem by using the up-to-date information provided during
online processing via the device specific SNEQ to detect the case of
outdated LCU data. If there is a difference, perform a re-read of that
data.

Cc: stable@vger.kernel.org
Reviewed-by: Jan Hoeppner 
Signed-off-by: Stefan Haberland 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

s390/cio: update chpid descriptor after resource accessibility event

2018-04-29T09:32:02+00:00

commit af2e460ade0b0180d0f3812ca4f4f59cc9597f3e upstream.

Channel path descriptors have been seen as something stable (as
long as the chpid is configured). Recent tests have shown that the
descriptor can also be altered when the link state of a channel path
changes. Thus it is necessary to update the descriptor during
handling of resource accessibility events.

Cc: 
Signed-off-by: Sebastian Ott 
Reviewed-by: Peter Oberparleiter 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

cdrom: information leak in cdrom_ioctl_media_changed()

2018-04-29T09:32:02+00:00

commit 9de4ee40547fd315d4a0ed1dd15a2fa3559ad707 upstream.

This cast is wrong.  "cdi->capacity" is an int and "arg" is an unsigned
long.  The way the check is written now, if one of the high 32 bits is
set then we could read outside the info->slots[] array.

This bug is pretty old and it predates git.

Reviewed-by: Christoph Hellwig 
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

scsi: mptsas: Disable WRITE SAME

2018-04-29T09:32:02+00:00

commit 94e5395d2403c8bc2504a7cbe4c4caaacb7b8b84 upstream.

First generation MPT Fusion controllers can not translate WRITE SAME
when the attached device is a SATA drive. Disable WRITE SAME support.

Reported-by: Nikola Ciprich 
Cc: 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

strparser: Fix incorrect strp->need_bytes value.

2018-04-29T09:32:02+00:00

[ Upstream commit 9d0c75bf6e03d9bf80c55b0f677dc9b982958fd5 ]

strp_data_ready resets strp->need_bytes to 0 if strp_peek_len indicates
that the remainder of the message has been received. However,
do_strp_work does not reset strp->need_bytes to 0. If do_strp_work
completes a partial message, the value of strp->need_bytes will continue
to reflect the needed bytes of the previous message, causing
future invocations of strp_data_ready to return early if
strp->need_bytes is less than strp_peek_len. Resetting strp->need_bytes
to 0 in __strp_recv on handing a full message to the upper layer solves
this problem.

__strp_recv also calculates strp->need_bytes using stm->accum_len before
stm->accum_len has been incremented by cand_len. This can cause
strp->need_bytes to be equal to the full length of the message instead
of the full length minus the accumulated length. This, in turn, causes
strp_data_ready to return early, even when there is sufficient data to
complete the partial message. Incrementing stm->accum_len before using
it to calculate strp->need_bytes solves this problem.

Found while testing net/tls_sw recv path.

Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages")
Signed-off-by: Doron Roberts-Kedes 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy

2018-04-29T09:32:02+00:00

[ Upstream commit aa8f8778493c85fff480cdf8b349b1e1dcb5f243 ]

KMSAN reported use of uninit-value that I tracked to lack
of proper size check on RTA_TABLE attribute.

I also believe RTA_PREFSRC lacks a similar check.

Fixes: 86872cb57925 ("[IPv6] route: FIB6 configuration using struct fib6_config")
Fixes: c3968a857a6b ("ipv6: RTA_PREFSRC support for ipv6 route source address selection")
Signed-off-by: Eric Dumazet 
Reported-by: syzbot 
Acked-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: af_packet: fix race in PACKET_{R|T}X_RING

2018-04-29T09:32:02+00:00

[ Upstream commit 5171b37d959641bbc619781caf62e61f7b940871 ]

In order to remove the race caught by syzbot [1], we need
to lock the socket before using po->tp_version as this could
change under us otherwise.

This means lock_sock() and release_sock() must be done by
packet_set_ring() callers.

[1] :
BUG: KMSAN: uninit-value in packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249
CPU: 0 PID: 20195 Comm: syzkaller707632 Not tainted 4.16.0+ #83
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
 packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249
 packet_setsockopt+0x12c6/0x5a90 net/packet/af_packet.c:3662
 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849
 SyS_setsockopt+0x76/0xa0 net/socket.c:1828
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x449099
RSP: 002b:00007f42b5307ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 000000000070003c RCX: 0000000000449099
RDX: 0000000000000005 RSI: 0000000000000107 RDI: 0000000000000003
RBP: 0000000000700038 R08: 000000000000001c R09: 0000000000000000
R10: 00000000200000c0 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000080eecf R14: 00007f42b53089c0 R15: 0000000000000001

Local variable description: ----req_u@packet_setsockopt
Variable was created at:
 packet_setsockopt+0x13f/0x5a90 net/packet/af_packet.c:3612
 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849

Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: Eric Dumazet 
Reported-by: syzbot 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman