Add a new IIO channel type for liquid volumetric flow sensors.  The
unit exposed via the standard _scale attribute is cubic metres per
second (m^3/s), following the SI convention used by the other IIO
channel types.

Update iio-core's name table, the iio_event_monitor whitelist and
the sysfs-bus-iio ABI document to match.  The new _scale attribute is
folded into the existing shared _scale block; only the per-type _raw
needs a fresh entry.

Signed-off-by: Wadim Mueller <wafgo01@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

So far, parts that could only do differential voltage measurements were
only required to have a consistent labeling of their channels by complying
either to voltageY or to voltageY-voltageZ ABI. Over time, code maintainers
came to the conclusion that the voltageY-voltageZ ABI is better suited for
differential-only chips as it provides a simple indication to users that
the channels measure the difference of two inputs.

Adjust the ABI documentation to recommend using the voltageY-voltageZ ABI
for chips that do only differential voltage measurements.

Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

Add a new powerdown mode for DACs with 10kohm resistor to GND.

Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Add parenthesis and dashes.

Signed-off-by: Manuel Ebner <manuelebner@mailbox.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Add a new channel type for sensors that report fractional coverage as
a percentage. The sysfs attribute is in_coverageY_raw; after applying
in_coverageY_scale the value is in percent. The first user is the
ADT7604 leak detector, where the value represents the portion of the
sensing element that is wetted.

Signed-off-by: Liviu Stan <liviu.stan@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Add powerdown mode entries for DACs with 500 Ohm, 3.85 kOhm, and
16 kOhm resistor to ground output impedance states. These are used
by the AD3531/AD3531R 4-channel DAC.

Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This modifier applies to the IIO_ROT channel type, and indicates a data
representation that specifies the {x, y, z} components of the normalized
quaternion vector.

Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

In the data storage description of a scan element, the first character
after the colon can have the values 's' and 'u' to specify signed and
unsigned integers, respectively.
Add 'f' as an allowed value to specify floating-point numbers formatted
according to the IEEE 754 standard.

Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Triggers exist under /sys/bus/iio/devices/, not under /sys/class/iio.
/sys/class/iio does not even exist. Use the current path.

Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add sysfs pressure event attributes exposed by the mpl3115 driver. These
allow controlling the threshold value and the enable state.

Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>